From: Stanislaw Gruszka <stf_xl@wp.pl>
To: Jeff Dike <jdike@addtoit.com>
Cc: user-mode-linux-devel@lists.sourceforge.net
Subject: Re: [uml-devel] [PATCH] Avoid not intended gdb breakpoints removal
Date: Thu, 6 Dec 2007 23:21:24 +0100 [thread overview]
Message-ID: <200712062321.25013.stf_xl@wp.pl> (raw)
In-Reply-To: <20071206013920.GA10961@c2.user-mode-linux.org>
On Thursday 06 December 2007 02:39, Jeff Dike wrote:
> This has bugged me forever, and I was too scared to go into gdb to
> figure out what its problem was.
:-) I considered "debugging a debugger" as something strange but doable.
> A couple of comments:
> 1 - I think I would prefer to use __WCLONE instead of __WALL since
> we know what type of process we are creating, and it seems clearer in
> the code to say specifically what we want
I removed __WALL where possible. Some functions still use it, because must
wait for any kind of child.
> 1a - I think I would like to stick all those waits under some API in
> helper.c as we already have an interface for creating children, and as
> it stands now, the callers have knowlege about the internal aspects of
> child creation that they probably shouldn't.
Ok, I changed a little helper_wait() function and use it for drivers.
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
---
diff --git a/arch/um/drivers/net_user.c b/arch/um/drivers/net_user.c
index 90d7f2e..29185ca 100644
--- a/arch/um/drivers/net_user.c
+++ b/arch/um/drivers/net_user.c
@@ -201,7 +201,7 @@ static int change_tramp(char **argv, char *output, int output_len)
close(fds[1]);
if (pid > 0)
- CATCH_EINTR(err = waitpid(pid, NULL, 0));
+ helper_wait(pid, 0, "change_tramp");
return pid;
}
diff --git a/arch/um/drivers/slip_user.c b/arch/um/drivers/slip_user.c
index 5f06204..a97d942 100644
--- a/arch/um/drivers/slip_user.c
+++ b/arch/um/drivers/slip_user.c
@@ -109,15 +109,7 @@ static int slip_tramp(char **argv, int fd)
read_output(fds[0], output, output_len);
printk("%s", output);
- CATCH_EINTR(err = waitpid(pid, &status, 0));
- if (err < 0)
- err = errno;
- else if (!WIFEXITED(status) || (WEXITSTATUS(status) != 0)) {
- printk(UM_KERN_ERR "'%s' didn't exit with status 0\n", argv[0]);
- err = -EINVAL;
- }
- else err = 0;
-
+ err = helper_wait(pid, 0, argv[0]);
close(fds[0]);
out_free:
diff --git a/arch/um/drivers/slirp_user.c b/arch/um/drivers/slirp_user.c
index 1865089..89c1be2 100644
--- a/arch/um/drivers/slirp_user.c
+++ b/arch/um/drivers/slirp_user.c
@@ -79,7 +79,7 @@ out:
static void slirp_close(int fd, void *data)
{
struct slirp_data *pri = data;
- int status,err;
+ int err;
close(fd);
close(pri->slave);
@@ -98,18 +98,9 @@ static void slirp_close(int fd, void *data)
"(%d)\n", pri->pid, errno);
}
#endif
-
- CATCH_EINTR(err = waitpid(pri->pid, &status, WNOHANG));
- if (err < 0) {
- printk(UM_KERN_ERR "slirp_close: waitpid returned %d\n", errno);
- return;
- }
-
- if (err == 0) {
- printk(UM_KERN_ERR "slirp_close: process %d has not exited\n",
- pri->pid);
+ err = helper_wait(pri->pid, 1, "slirp_close");
+ if (err < 0)
return;
- }
pri->pid = -1;
}
diff --git a/arch/um/drivers/ubd_kern.c b/arch/um/drivers/ubd_kern.c
diff --git a/arch/um/drivers/ubd_user.c b/arch/um/drivers/ubd_user.c
index 41d254b..48fc745 100644
--- a/arch/um/drivers/ubd_user.c
+++ b/arch/um/drivers/ubd_user.c
@@ -49,8 +49,7 @@ int start_io_thread(unsigned long sp, int *fd_out)
goto out_close;
}
- pid = clone(io_thread, (void *) sp, CLONE_FILES | CLONE_VM | SIGCHLD,
- NULL);
+ pid = clone(io_thread, (void *) sp, CLONE_FILES | CLONE_VM, NULL);
if(pid < 0){
err = -errno;
printk("start_io_thread - clone failed : errno = %d\n", errno);
diff --git a/arch/um/include/os.h b/arch/um/include/os.h
index fbf0a87..6f0d1c7 100644
--- a/arch/um/include/os.h
+++ b/arch/um/include/os.h
@@ -214,7 +214,7 @@ extern int execvp_noalloc(char *buf, const char *file, char *const argv[]);
extern int run_helper(void (*pre_exec)(void *), void *pre_data, char **argv);
extern int run_helper_thread(int (*proc)(void *), void *arg,
unsigned int flags, unsigned long *stack_out);
-extern int helper_wait(int pid);
+extern int helper_wait(int pid, int nohang, char *pname);
/* tls.c */
diff --git a/arch/um/os-Linux/aio.c b/arch/um/os-Linux/aio.c
index 4158118..93dc0c8 100644
--- a/arch/um/os-Linux/aio.c
+++ b/arch/um/os-Linux/aio.c
@@ -218,7 +218,7 @@ static int init_aio_24(void)
goto out_close_pipe;
err = run_helper_thread(not_aio_thread, NULL,
- CLONE_FILES | CLONE_VM | SIGCHLD, &aio_stack);
+ CLONE_FILES | CLONE_VM, &aio_stack);
if (err < 0)
goto out_close_pipe;
@@ -254,7 +254,7 @@ static int init_aio_26(void)
}
err = run_helper_thread(aio_thread, NULL,
- CLONE_FILES | CLONE_VM | SIGCHLD, &aio_stack);
+ CLONE_FILES | CLONE_VM, &aio_stack);
if (err < 0)
return err;
diff --git a/arch/um/os-Linux/drivers/ethertap_user.c b/arch/um/os-Linux/drivers/ethertap_user.c
index 4ff5536..07ca0cb 100644
--- a/arch/um/os-Linux/drivers/ethertap_user.c
+++ b/arch/um/os-Linux/drivers/ethertap_user.c
@@ -94,7 +94,7 @@ static int etap_tramp(char *dev, char *gate, int control_me,
int control_remote, int data_me, int data_remote)
{
struct etap_pre_exec_data pe_data;
- int pid, status, err, n;
+ int pid, err, n;
char version_buf[sizeof("nnnnn\0")];
char data_fd_buf[sizeof("nnnnnn\0")];
char gate_buf[sizeof("nnn.nnn.nnn.nnn\0")];
@@ -131,13 +131,7 @@ static int etap_tramp(char *dev, char *gate, int control_me,
}
if (c != 1) {
printk(UM_KERN_ERR "etap_tramp : uml_net failed\n");
- err = -EINVAL;
- CATCH_EINTR(n = waitpid(pid, &status, 0));
- if (n < 0)
- err = -errno;
- else if (!WIFEXITED(status) || (WEXITSTATUS(status) != 1))
- printk(UM_KERN_ERR "uml_net didn't exit with "
- "status 1\n");
+ err = helper_wait(pid, 0, "uml_net");
}
return err;
}
diff --git a/arch/um/os-Linux/drivers/tuntap_user.c b/arch/um/os-Linux/drivers/tuntap_user.c
index 6c55d3c..7b38289 100644
--- a/arch/um/os-Linux/drivers/tuntap_user.c
+++ b/arch/um/os-Linux/drivers/tuntap_user.c
@@ -107,7 +107,7 @@ static int tuntap_open_tramp(char *gate, int *fd_out, int me, int remote,
"errno = %d\n", errno);
return err;
}
- CATCH_EINTR(waitpid(pid, NULL, 0));
+ helper_wait(pid, 0, "tuntap_open_tramp");
cmsg = CMSG_FIRSTHDR(&msg);
if (cmsg == NULL) {
diff --git a/arch/um/os-Linux/helper.c b/arch/um/os-Linux/helper.c
index 7a72dbb..813b15d 100644
--- a/arch/um/os-Linux/helper.c
+++ b/arch/um/os-Linux/helper.c
@@ -76,7 +76,7 @@ int run_helper(void (*pre_exec)(void *), void *pre_data, char **argv)
data.fd = fds[1];
data.buf = __cant_sleep() ? kmalloc(PATH_MAX, UM_GFP_ATOMIC) :
kmalloc(PATH_MAX, UM_GFP_KERNEL);
- pid = clone(helper_child, (void *) sp, CLONE_VM | SIGCHLD, &data);
+ pid = clone(helper_child, (void *) sp, CLONE_VM, &data);
if (pid < 0) {
ret = -errno;
printk("run_helper : clone failed, errno = %d\n", errno);
@@ -101,7 +101,7 @@ int run_helper(void (*pre_exec)(void *), void *pre_data, char **argv)
ret = n;
kill(pid, SIGKILL);
}
- CATCH_EINTR(waitpid(pid, NULL, 0));
+ CATCH_EINTR(waitpid(pid, NULL, __WCLONE));
}
out_free2:
@@ -126,7 +126,7 @@ int run_helper_thread(int (*proc)(void *), void *arg, unsigned int flags,
return -ENOMEM;
sp = stack + UM_KERN_PAGE_SIZE - sizeof(void *);
- pid = clone(proc, (void *) sp, flags | SIGCHLD, arg);
+ pid = clone(proc, (void *) sp, flags, arg);
if (pid < 0) {
err = -errno;
printk("run_helper_thread : clone failed, errno = %d\n",
@@ -134,7 +134,7 @@ int run_helper_thread(int (*proc)(void *), void *arg, unsigned int flags,
return err;
}
if (stack_out == NULL) {
- CATCH_EINTR(pid = waitpid(pid, &status, 0));
+ CATCH_EINTR(pid = waitpid(pid, &status, __WCLONE));
if (pid < 0) {
err = -errno;
printk("run_helper_thread - wait failed, errno = %d\n",
@@ -150,14 +150,29 @@ int run_helper_thread(int (*proc)(void *), void *arg, unsigned int flags,
return pid;
}
-int helper_wait(int pid)
+int helper_wait(int pid, int nohang, char *pname)
{
- int ret;
+ int ret, status;
+ int wflags = __WCLONE;
- CATCH_EINTR(ret = waitpid(pid, NULL, WNOHANG));
+ if (nohang)
+ wflags |= WNOHANG;
+
+ if (!pname)
+ pname = "helper_wait";
+
+ CATCH_EINTR(ret = waitpid(pid, &status, wflags));
if (ret < 0) {
- ret = -errno;
- printk("helper_wait : waitpid failed, errno = %d\n", errno);
- }
- return ret;
+ printk("%s : waitpid process %d failed, errno = %d\n",
+ pname, pid, errno);
+ return -errno;
+ } else if (nohang && ret == 0) {
+ printk("%s : process %d has not exited\n", pname, pid);
+ return -ECHILD;
+ } else if (!WIFEXITED(status) || WEXITSTATUS(status) != 0) {
+ printk(UM_KERN_ERR "%s : process %d didn't exit with status 0\n",
+ pname, pid);
+ return -ECHILD;
+ } else
+ return 0;
}
diff --git a/arch/um/os-Linux/process.c b/arch/um/os-Linux/process.c
index 37781db..bda5c31 100644
--- a/arch/um/os-Linux/process.c
+++ b/arch/um/os-Linux/process.c
@@ -101,7 +101,7 @@ void os_kill_process(int pid, int reap_child)
{
kill(pid, SIGKILL);
if (reap_child)
- CATCH_EINTR(waitpid(pid, NULL, 0));
+ CATCH_EINTR(waitpid(pid, NULL, __WALL));
}
/* This is here uniquely to have access to the userspace errno, i.e. the one
@@ -130,7 +130,7 @@ void os_kill_ptraced_process(int pid, int reap_child)
ptrace(PTRACE_KILL, pid);
ptrace(PTRACE_CONT, pid);
if (reap_child)
- CATCH_EINTR(waitpid(pid, NULL, 0));
+ CATCH_EINTR(waitpid(pid, NULL, __WALL));
}
/* Don't use the glibc version, which caches the result in TLS. It misses some
diff --git a/arch/um/os-Linux/skas/process.c b/arch/um/os-Linux/skas/process.c
index d77c81d..e8b7a97 100644
--- a/arch/um/os-Linux/skas/process.c
+++ b/arch/um/os-Linux/skas/process.c
@@ -64,7 +64,7 @@ void wait_stub_done(int pid)
int n, status, err;
while (1) {
- CATCH_EINTR(n = waitpid(pid, &status, WUNTRACED));
+ CATCH_EINTR(n = waitpid(pid, &status, WUNTRACED | __WALL));
if ((n < 0) || !WIFSTOPPED(status))
goto bad_wait;
@@ -153,7 +153,7 @@ static void handle_trap(int pid, struct uml_pt_regs *regs,
panic("handle_trap - continuing to end of syscall "
"failed, errno = %d\n", errno);
- CATCH_EINTR(err = waitpid(pid, &status, WUNTRACED));
+ CATCH_EINTR(err = waitpid(pid, &status, WUNTRACED | __WALL));
if ((err < 0) || !WIFSTOPPED(status) ||
(WSTOPSIG(status) != SIGTRAP + 0x80)) {
err = ptrace_dump_regs(pid);
@@ -255,16 +255,18 @@ int start_userspace(unsigned long stub_stack)
panic("start_userspace : mmap failed, errno = %d", errno);
sp = (unsigned long) stack + UM_KERN_PAGE_SIZE - sizeof(void *);
- flags = CLONE_FILES | SIGCHLD;
+ flags = CLONE_FILES;
if (proc_mm)
flags |= CLONE_VM;
+ else
+ flags |= SIGCHLD;
pid = clone(userspace_tramp, (void *) sp, flags, (void *) stub_stack);
if (pid < 0)
panic("start_userspace : clone failed, errno = %d", errno);
do {
- CATCH_EINTR(n = waitpid(pid, &status, WUNTRACED));
+ CATCH_EINTR(n = waitpid(pid, &status, WUNTRACED | __WALL));
if (n < 0)
panic("start_userspace : wait failed, errno = %d",
errno);
@@ -314,7 +316,7 @@ void userspace(struct uml_pt_regs *regs)
"pid=%d, ptrace operation = %d, errno = %d\n",
pid, op, errno);
- CATCH_EINTR(err = waitpid(pid, &status, WUNTRACED));
+ CATCH_EINTR(err = waitpid(pid, &status, WUNTRACED | __WALL));
if (err < 0)
panic("userspace - waitpid failed, errno = %d\n",
errno);
diff --git a/arch/um/os-Linux/start_up.c b/arch/um/os-Linux/start_up.c
diff --git a/arch/um/os-Linux/util.c b/arch/um/os-Linux/util.c
index ef09543..3e058ce 100644
--- a/arch/um/os-Linux/util.c
+++ b/arch/um/os-Linux/util.c
@@ -141,7 +141,7 @@ void os_dump_core(void)
* nothing reasonable to do if that fails.
*/
- while ((pid = waitpid(-1, NULL, WNOHANG)) > 0)
+ while ((pid = waitpid(-1, NULL, WNOHANG | __WALL)) > 0)
os_kill_ptraced_process(pid, 0);
abort();
-------------------------------------------------------------------------
SF.Net email is sponsored by:
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php
_______________________________________________
User-mode-linux-devel mailing list
User-mode-linux-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/user-mode-linux-devel
prev parent reply other threads:[~2007-12-06 22:16 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-12-05 17:53 [uml-devel] [PATCH] Avoid not intended gdb breakpoints removal Stanislaw Gruszka
2007-12-06 1:39 ` Jeff Dike
2007-12-06 22:21 ` Stanislaw Gruszka [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200712062321.25013.stf_xl@wp.pl \
--to=stf_xl@wp.pl \
--cc=jdike@addtoit.com \
--cc=user-mode-linux-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.