From: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
To: Sam Ravnborg <sam@ravnborg.org>
Cc: akpm@linux-foundation.org, lkml <linux-kernel@vger.kernel.org>,
Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>,
davem@davemloft.net, mathieu.desnoyers@polymtl.ca,
hskinnemoen@atmel.com
Subject: Re: [PATCH 1/2] Kprobes: Indicate kretprobe support in arch/<arch>/Kconfig - updated
Date: Mon, 10 Dec 2007 17:02:49 +0530 [thread overview]
Message-ID: <20071210113249.GC8437@in.ibm.com> (raw)
In-Reply-To: <20071210101307.GA14359@uranus.ravnborg.org>
On Mon, Dec 10, 2007 at 11:13:07AM +0100, Sam Ravnborg wrote:
> On Mon, Dec 10, 2007 at 03:22:22PM +0530, Ananth N Mavinakayanahalli wrote:
> > From: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
> >
> > This patch adds CONFIG_HAVE_KRETPROBES to the arch/<arch>/Kconfig file
> > for relevant architectures with kprobes support. This facilitates easy
> > handling of in-kernel modules (like samples/kprobes/kretprobe_example.c)
> > that depend on kretprobes being present in the kernel.
> >
> > This patch depends on Mathieu Desnoyers' "Instrumentation menu removal"
> > patchset (http://marc.info/?l=linux-kernel&m=119496432229633&w=2)
> >
> > Updated to apply on 2.6.24-rc4-mm1.
> >
> > Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
> > ---
> > arch/avr32/Kconfig | 5 +++++
> > arch/ia64/Kconfig | 5 +++++
> > arch/powerpc/Kconfig | 5 +++++
> > arch/s390/Kconfig | 5 +++++
> > arch/sparc64/Kconfig | 5 +++++
> > arch/x86/Kconfig | 5 +++++
> > include/asm-ia64/kprobes.h | 1 -
> > include/asm-powerpc/kprobes.h | 1 -
> > include/asm-s390/kprobes.h | 1 -
> > include/asm-x86/kprobes_32.h | 1 -
> > include/asm-x86/kprobes_64.h | 1 -
> > include/linux/kprobes.h | 6 +++---
> > kernel/kprobes.c | 8 +++-----
> > 13 files changed, 36 insertions(+), 13 deletions(-)
> >
> > Index: linux-2.6.24-rc4/arch/avr32/Kconfig
> > ===================================================================
> > --- linux-2.6.24-rc4.orig/arch/avr32/Kconfig
> > +++ linux-2.6.24-rc4/arch/avr32/Kconfig
> > @@ -66,6 +66,11 @@ config GENERIC_BUG
> > def_bool y
> > depends on BUG
> >
> > +config HAVE_KRETPROBES
> > + bool
> > + depends on HAVE_KPROBES
> > + default n
> > +
>
> The symbol HAVE_KRETPROBES should be defined in the common file - so
> the only thing you have to do is a single line:
> config AVR32
> + select HAVE_KRETPROBES
>
>
> Much more dense than defining the symbols once for each arch.
Agreed. Updated patch below.
From: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
This patch adds CONFIG_HAVE_KRETPROBES to the arch/<arch>/Kconfig file
for relevant architectures with kprobes support. This facilitates easy
handling of in-kernel modules (like samples/kprobes/kretprobe_example.c)
that depend on kretprobes being present in the kernel.
This patch depends on Mathieu Desnoyers' "Instrumentation menu removal"
patchset (http://marc.info/?l=linux-kernel&m=119496432229633&w=2)
Updated to apply on 2.6.24-rc4-mm1. Thanks to Sam Ravnborg for helping
make the patch more lean.
Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
---
arch/Kconfig | 4 ++++
arch/ia64/Kconfig | 1 +
arch/powerpc/Kconfig | 1 +
arch/s390/Kconfig | 1 +
arch/x86/Kconfig | 1 +
include/asm-ia64/kprobes.h | 1 -
include/asm-powerpc/kprobes.h | 1 -
include/asm-x86/kprobes_32.h | 1 -
include/asm-x86/kprobes_64.h | 1 -
include/linux/kprobes.h | 6 +++---
kernel/kprobes.c | 8 +++-----
11 files changed, 14 insertions(+), 12 deletions(-)
Index: linux-2.6.24-rc4/arch/Kconfig
===================================================================
--- linux-2.6.24-rc4.orig/arch/Kconfig
+++ linux-2.6.24-rc4/arch/Kconfig
@@ -29,3 +29,7 @@ config KPROBES
config HAVE_KPROBES
def_bool n
+
+config HAVE_KRETPROBES
+ def_bool n
+ depends on HAVE_KPROBES
Index: linux-2.6.24-rc4/arch/ia64/Kconfig
===================================================================
--- linux-2.6.24-rc4.orig/arch/ia64/Kconfig
+++ linux-2.6.24-rc4/arch/ia64/Kconfig
@@ -17,6 +17,7 @@ config IA64
select ARCH_SUPPORTS_MSI
select HAVE_OPROFILE
select HAVE_KPROBES
+ select HAVE_KRETPROBES
default y
help
The Itanium Processor Family is Intel's 64-bit successor to
Index: linux-2.6.24-rc4/arch/powerpc/Kconfig
===================================================================
--- linux-2.6.24-rc4.orig/arch/powerpc/Kconfig
+++ linux-2.6.24-rc4/arch/powerpc/Kconfig
@@ -81,6 +81,7 @@ config PPC
default y
select HAVE_OPROFILE
select HAVE_KPROBES
+ select HAVE_KRETPROBES
config EARLY_PRINTK
bool
Index: linux-2.6.24-rc4/arch/s390/Kconfig
===================================================================
--- linux-2.6.24-rc4.orig/arch/s390/Kconfig
+++ linux-2.6.24-rc4/arch/s390/Kconfig
@@ -53,6 +53,7 @@ config S390
def_bool y
select HAVE_OPROFILE
select HAVE_KPROBES
+ select HAVE_KRETPROBES
source "init/Kconfig"
Index: linux-2.6.24-rc4/arch/x86/Kconfig
===================================================================
--- linux-2.6.24-rc4.orig/arch/x86/Kconfig
+++ linux-2.6.24-rc4/arch/x86/Kconfig
@@ -20,6 +20,7 @@ config X86
def_bool y
select HAVE_OPROFILE
select HAVE_KPROBES
+ select HAVE_KRETPROBES
config GENERIC_TIME
def_bool y
Index: linux-2.6.24-rc4/include/asm-ia64/kprobes.h
===================================================================
--- linux-2.6.24-rc4.orig/include/asm-ia64/kprobes.h
+++ linux-2.6.24-rc4/include/asm-ia64/kprobes.h
@@ -82,7 +82,6 @@ struct kprobe_ctlblk {
struct prev_kprobe prev_kprobe[ARCH_PREV_KPROBE_SZ];
};
-#define ARCH_SUPPORTS_KRETPROBES
#define kretprobe_blacklist_size 0
#define SLOT0_OPCODE_SHIFT (37)
Index: linux-2.6.24-rc4/include/asm-powerpc/kprobes.h
===================================================================
--- linux-2.6.24-rc4.orig/include/asm-powerpc/kprobes.h
+++ linux-2.6.24-rc4/include/asm-powerpc/kprobes.h
@@ -80,7 +80,6 @@ typedef unsigned int kprobe_opcode_t;
#define is_trap(instr) (IS_TW(instr) || IS_TWI(instr))
#endif
-#define ARCH_SUPPORTS_KRETPROBES
#define flush_insn_slot(p) do { } while (0)
#define kretprobe_blacklist_size 0
Index: linux-2.6.24-rc4/include/asm-x86/kprobes_32.h
===================================================================
--- linux-2.6.24-rc4.orig/include/asm-x86/kprobes_32.h
+++ linux-2.6.24-rc4/include/asm-x86/kprobes_32.h
@@ -42,7 +42,6 @@ typedef u8 kprobe_opcode_t;
? (MAX_STACK_SIZE) \
: (((unsigned long)current_thread_info()) + THREAD_SIZE - (ADDR)))
-#define ARCH_SUPPORTS_KRETPROBES
#define flush_insn_slot(p) do { } while (0)
extern const int kretprobe_blacklist_size;
Index: linux-2.6.24-rc4/include/asm-x86/kprobes_64.h
===================================================================
--- linux-2.6.24-rc4.orig/include/asm-x86/kprobes_64.h
+++ linux-2.6.24-rc4/include/asm-x86/kprobes_64.h
@@ -41,7 +41,6 @@ typedef u8 kprobe_opcode_t;
? (MAX_STACK_SIZE) \
: (((unsigned long)current_thread_info()) + THREAD_SIZE - (ADDR)))
-#define ARCH_SUPPORTS_KRETPROBES
extern const int kretprobe_blacklist_size;
void kretprobe_trampoline(void);
Index: linux-2.6.24-rc4/include/linux/kprobes.h
===================================================================
--- linux-2.6.24-rc4.orig/include/linux/kprobes.h
+++ linux-2.6.24-rc4/include/linux/kprobes.h
@@ -125,11 +125,11 @@ struct jprobe {
DECLARE_PER_CPU(struct kprobe *, current_kprobe);
DECLARE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk);
-#ifdef ARCH_SUPPORTS_KRETPROBES
+#ifdef CONFIG_HAVE_KRETPROBES
extern void arch_prepare_kretprobe(struct kretprobe_instance *ri,
struct pt_regs *regs);
extern int arch_trampoline_kprobe(struct kprobe *p);
-#else /* ARCH_SUPPORTS_KRETPROBES */
+#else /* CONFIG_HAVE_KRETPROBES */
static inline void arch_prepare_kretprobe(struct kretprobe *rp,
struct pt_regs *regs)
{
@@ -138,7 +138,7 @@ static inline int arch_trampoline_kprobe
{
return 0;
}
-#endif /* ARCH_SUPPORTS_KRETPROBES */
+#endif /* CONFIG_HAVE_KRETPROBES */
/*
* Function-return probe -
* Note:
Index: linux-2.6.24-rc4/kernel/kprobes.c
===================================================================
--- linux-2.6.24-rc4.orig/kernel/kprobes.c
+++ linux-2.6.24-rc4/kernel/kprobes.c
@@ -678,8 +678,7 @@ void __kprobes unregister_jprobe(struct
unregister_kprobe(&jp->kp);
}
-#ifdef ARCH_SUPPORTS_KRETPROBES
-
+#ifdef CONFIG_HAVE_KRETPROBES
/*
* This kprobe pre_handler is registered with every kretprobe. When probe
* hits it will set up the return probe.
@@ -762,7 +761,7 @@ int __kprobes register_kretprobe(struct
return ret;
}
-#else /* ARCH_SUPPORTS_KRETPROBES */
+#else /* CONFIG_HAVE_KRETPROBES */
int __kprobes register_kretprobe(struct kretprobe *rp)
{
@@ -774,8 +773,7 @@ static int __kprobes pre_handler_kretpro
{
return 0;
}
-
-#endif /* ARCH_SUPPORTS_KRETPROBES */
+#endif /* CONFIG_HAVE_KRETPROBES */
void __kprobes unregister_kretprobe(struct kretprobe *rp)
{
next prev parent reply other threads:[~2007-12-10 11:33 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-12-10 9:52 [PATCH 1/2] Kprobes: Indicate kretprobe support in arch/<arch>/Kconfig Ananth N Mavinakayanahalli
2007-12-10 9:53 ` [PATCH 2/2] Kprobes: Build kretprobe samples only if arch supports kretprobes Ananth N Mavinakayanahalli
2007-12-10 12:00 ` Sam Ravnborg
2007-12-10 13:42 ` [PATCH 2/2] Kprobes: Build kretprobe samples only if arch supports kretprobes - updated Ananth N Mavinakayanahalli
2007-12-10 10:13 ` [PATCH 1/2] Kprobes: Indicate kretprobe support in arch/<arch>/Kconfig Sam Ravnborg
2007-12-10 11:32 ` Ananth N Mavinakayanahalli [this message]
2007-12-10 15:10 ` [PATCH 1/2] Kprobes: Indicate kretprobe support in arch/<arch>/Kconfig - updated Mathieu Desnoyers
2007-12-11 6:09 ` Ananth N Mavinakayanahalli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20071210113249.GC8437@in.ibm.com \
--to=ananth@in.ibm.com \
--cc=akpm@linux-foundation.org \
--cc=anil.s.keshavamurthy@intel.com \
--cc=davem@davemloft.net \
--cc=hskinnemoen@atmel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mathieu.desnoyers@polymtl.ca \
--cc=sam@ravnborg.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.