* [PATCH] drivers/edac/: Spelling fixes
@ 2007-12-17 19:30 ` Joe Perches
0 siblings, 0 replies; 34+ messages in thread
From: Joe Perches @ 2007-12-17 19:30 UTC (permalink / raw)
To: linux-kernel; +Cc: Andrew Morton, Doug Thompson, bluesmoke-devel
Signed-off-by: Joe Perches <joe@perches.com>
---
drivers/edac/edac_pci.c | 2 +-
drivers/edac/i5000_edac.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/edac/edac_pci.c b/drivers/edac/edac_pci.c
index 5dee9f5..e0b47b7 100644
--- a/drivers/edac/edac_pci.c
+++ b/drivers/edac/edac_pci.c
@@ -73,7 +73,7 @@ EXPORT_SYMBOL_GPL(edac_pci_alloc_ctl_info);
*
* Last action on the pci control structure.
*
- * call the remove sysfs informaton, which will unregister
+ * call the remove sysfs information, which will unregister
* this control struct's kobj. When that kobj's ref count
* goes to zero, its release function will be call and then
* kfree() the memory.
diff --git a/drivers/edac/i5000_edac.c b/drivers/edac/i5000_edac.c
index a1f24c4..5a85201 100644
--- a/drivers/edac/i5000_edac.c
+++ b/drivers/edac/i5000_edac.c
@@ -351,7 +351,7 @@ struct i5000_pvt {
u16 b1_ambpresent0; /* Branch 1, Channel 8 */
u16 b1_ambpresent1; /* Branch 1, Channel 1 */
- /* DIMM infomation matrix, allocating architecture maximums */
+ /* DIMM information matrix, allocating architecture maximums */
struct i5000_dimm_info dimm_info[MAX_CSROWS][MAX_CHANNELS];
/* Actual values for this controller */
--
1.5.3.7.949.g2221a6
^ permalink raw reply related [flat|nested] 34+ messages in thread* [PATCH] drivers/firmware/: Spelling fixes
@ 2007-12-17 19:30 ` Joe Perches
0 siblings, 0 replies; 34+ messages in thread
From: Joe Perches @ 2007-12-17 19:30 UTC (permalink / raw)
To: linux-kernel; +Cc: Andrew Morton
Signed-off-by: Joe Perches <joe@perches.com>
---
drivers/firmware/edd.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/firmware/edd.c b/drivers/firmware/edd.c
index 6942e06..d41a256 100644
--- a/drivers/firmware/edd.c
+++ b/drivers/firmware/edd.c
@@ -11,7 +11,7 @@
*
* This code takes information provided by BIOS EDD calls
* fn41 - Check Extensions Present and
- * fn48 - Get Device Parametes with EDD extensions
+ * fn48 - Get Device Parameters with EDD extensions
* made in setup.S, copied to safe structures in setup.c,
* and presents it in sysfs.
*
--
1.5.3.7.949.g2221a6
^ permalink raw reply related [flat|nested] 34+ messages in thread
* [PATCH] drivers/i2c/: Spelling fixes
@ 2007-12-17 19:30 ` Joe Perches
2007-12-17 20:32 ` Jean Delvare
0 siblings, 1 reply; 34+ messages in thread
From: Joe Perches @ 2007-12-17 19:30 UTC (permalink / raw)
To: linux-kernel; +Cc: Andrew Morton, Jean Delvare, i2c
Signed-off-by: Joe Perches <joe@perches.com>
---
drivers/i2c/busses/i2c-at91.c | 2 +-
drivers/i2c/busses/i2c-powermac.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c
index 9c8b6d5..c09b036 100644
--- a/drivers/i2c/busses/i2c-at91.c
+++ b/drivers/i2c/busses/i2c-at91.c
@@ -135,7 +135,7 @@ static int xfer_write(struct i2c_adapter *adap, unsigned char *buf, int length)
* Generic i2c master transfer entrypoint.
*
* Note: We do not use Atmel's feature of storing the "internal device address".
- * Instead the "internal device address" has to be written using a seperate
+ * Instead the "internal device address" has to be written using a separate
* i2c message.
* http://lists.arm.linux.org.uk/pipermail/linux-arm-kernel/2004-September/024411.html
*/
diff --git a/drivers/i2c/busses/i2c-powermac.c b/drivers/i2c/busses/i2c-powermac.c
index 0ab4f26..7813127 100644
--- a/drivers/i2c/busses/i2c-powermac.c
+++ b/drivers/i2c/busses/i2c-powermac.c
@@ -94,7 +94,7 @@ static s32 i2c_powermac_smbus_xfer( struct i2c_adapter* adap,
break;
/* Note that these are broken vs. the expected smbus API where
- * on reads, the lenght is actually returned from the function,
+ * on reads, the length is actually returned from the function,
* but I think the current API makes no sense and I don't want
* any driver that I haven't verified for correctness to go
* anywhere near a pmac i2c bus anyway ...
--
1.5.3.7.949.g2221a6
^ permalink raw reply related [flat|nested] 34+ messages in thread
* Re: [PATCH] drivers/i2c/: Spelling fixes
2007-12-17 19:30 ` [PATCH] drivers/i2c/: " Joe Perches
@ 2007-12-17 20:32 ` Jean Delvare
0 siblings, 0 replies; 34+ messages in thread
From: Jean Delvare @ 2007-12-17 20:32 UTC (permalink / raw)
To: Joe Perches; +Cc: linux-kernel, Andrew Morton, i2c
Hi Joe,
On Mon, 17 Dec 2007 11:30:34 -0800, Joe Perches wrote:
>
> Signed-off-by: Joe Perches <joe@perches.com>
> ---
> drivers/i2c/busses/i2c-at91.c | 2 +-
> drivers/i2c/busses/i2c-powermac.c | 2 +-
> 2 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c
> index 9c8b6d5..c09b036 100644
> --- a/drivers/i2c/busses/i2c-at91.c
> +++ b/drivers/i2c/busses/i2c-at91.c
> @@ -135,7 +135,7 @@ static int xfer_write(struct i2c_adapter *adap, unsigned char *buf, int length)
> * Generic i2c master transfer entrypoint.
> *
> * Note: We do not use Atmel's feature of storing the "internal device address".
> - * Instead the "internal device address" has to be written using a seperate
> + * Instead the "internal device address" has to be written using a separate
> * i2c message.
> * http://lists.arm.linux.org.uk/pipermail/linux-arm-kernel/2004-September/024411.html
> */
> diff --git a/drivers/i2c/busses/i2c-powermac.c b/drivers/i2c/busses/i2c-powermac.c
> index 0ab4f26..7813127 100644
> --- a/drivers/i2c/busses/i2c-powermac.c
> +++ b/drivers/i2c/busses/i2c-powermac.c
> @@ -94,7 +94,7 @@ static s32 i2c_powermac_smbus_xfer( struct i2c_adapter* adap,
> break;
>
> /* Note that these are broken vs. the expected smbus API where
> - * on reads, the lenght is actually returned from the function,
> + * on reads, the length is actually returned from the function,
> * but I think the current API makes no sense and I don't want
> * any driver that I haven't verified for correctness to go
> * anywhere near a pmac i2c bus anyway ...
Applied, thank you.
--
Jean Delvare
^ permalink raw reply [flat|nested] 34+ messages in thread
* [PATCH] drivers/ide/: Spelling fixes
@ 2007-12-17 19:30 ` Joe Perches
2007-12-17 20:53 ` Bartlomiej Zolnierkiewicz
0 siblings, 1 reply; 34+ messages in thread
From: Joe Perches @ 2007-12-17 19:30 UTC (permalink / raw)
To: linux-kernel; +Cc: Andrew Morton, Bartlomiej Zolnierkiewicz, linux-ide
Signed-off-by: Joe Perches <joe@perches.com>
---
drivers/ide/pci/cs5535.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/ide/pci/cs5535.c b/drivers/ide/pci/cs5535.c
index 9094916..ddcbeba 100644
--- a/drivers/ide/pci/cs5535.c
+++ b/drivers/ide/pci/cs5535.c
@@ -49,7 +49,7 @@
#define ATAC_BM0_PRD 0x04
#define CS5535_CABLE_DETECT 0x48
-/* Format I PIO settings. We seperate out cmd and data for safer timings */
+/* Format I PIO settings. We separate out cmd and data for safer timings */
static unsigned int cs5535_pio_cmd_timings[5] =
{ 0xF7F4, 0x53F3, 0x13F1, 0x5131, 0x1131 };
--
1.5.3.7.949.g2221a6
^ permalink raw reply related [flat|nested] 34+ messages in thread* [PATCH] drivers/infiniband/: Spelling fixes
@ 2007-12-17 19:30 ` Joe Perches
2007-12-18 5:48 ` Roland Dreier
0 siblings, 1 reply; 34+ messages in thread
From: Joe Perches @ 2007-12-17 19:30 UTC (permalink / raw)
To: linux-kernel
Cc: Andrew Morton, Christoph Raisch, Hal Rosenstock, Hoang-Nam Nguyen,
Roland Dreier, Sean Hefty, general
Signed-off-by: Joe Perches <joe@perches.com>
---
drivers/infiniband/hw/cxgb3/cxio_hal.c | 2 +-
drivers/infiniband/hw/ehca/ehca_av.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/infiniband/hw/cxgb3/cxio_hal.c b/drivers/infiniband/hw/cxgb3/cxio_hal.c
index eec6a30..26b8c0e 100644
--- a/drivers/infiniband/hw/cxgb3/cxio_hal.c
+++ b/drivers/infiniband/hw/cxgb3/cxio_hal.c
@@ -584,7 +584,7 @@ static int cxio_hal_ctrl_qp_write_mem(struct cxio_rdev *rdev_p, u32 addr,
{
u32 i, nr_wqe, copy_len;
u8 *copy_data;
- u8 wr_len, utx_len; /* lenght in 8 byte flit */
+ u8 wr_len, utx_len; /* length in 8 byte flit */
enum t3_wr_flags flag;
__be64 *wqe;
u64 utx_cmd;
diff --git a/drivers/infiniband/hw/ehca/ehca_av.c b/drivers/infiniband/hw/ehca/ehca_av.c
index f7782c8..194c1c3 100644
--- a/drivers/infiniband/hw/ehca/ehca_av.c
+++ b/drivers/infiniband/hw/ehca/ehca_av.c
@@ -1,7 +1,7 @@
/*
* IBM eServer eHCA Infiniband device driver for Linux on POWER
*
- * adress vector functions
+ * address vector functions
*
* Authors: Hoang-Nam Nguyen <hnguyen@de.ibm.com>
* Khadija Souissi <souissik@de.ibm.com>
--
1.5.3.7.949.g2221a6
^ permalink raw reply related [flat|nested] 34+ messages in thread* [PATCH] drivers/input/: Spelling fixes
@ 2007-12-17 19:30 ` Joe Perches
0 siblings, 0 replies; 34+ messages in thread
From: Joe Perches @ 2007-12-17 19:30 UTC (permalink / raw)
To: linux-kernel; +Cc: Andrew Morton
Signed-off-by: Joe Perches <joe@perches.com>
---
drivers/input/serio/gscps2.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/input/serio/gscps2.c b/drivers/input/serio/gscps2.c
index 3e99df6..adc3bd6 100644
--- a/drivers/input/serio/gscps2.c
+++ b/drivers/input/serio/gscps2.c
@@ -141,7 +141,7 @@ static void gscps2_flush(struct gscps2port *ps2port)
/*
* gscps2_writeb_output() - write a byte to the port
*
- * returns 1 on sucess, 0 on error
+ * returns 1 on success, 0 on error
*/
static inline int gscps2_writeb_output(struct gscps2port *ps2port, u8 data)
--
1.5.3.7.949.g2221a6
^ permalink raw reply related [flat|nested] 34+ messages in thread
* [PATCH] drivers/isdn/: Spelling fixes
@ 2007-12-17 19:30 ` Joe Perches
0 siblings, 0 replies; 34+ messages in thread
From: Joe Perches @ 2007-12-17 19:30 UTC (permalink / raw)
To: linux-kernel; +Cc: Andrew Morton, Armin Schindler, Karsten Keil, isdn4linux
Signed-off-by: Joe Perches <joe@perches.com>
---
drivers/isdn/hardware/eicon/debuglib.h | 2 +-
drivers/isdn/hardware/eicon/di.c | 2 +-
drivers/isdn/hardware/eicon/message.c | 2 +-
drivers/isdn/hysdn/hycapi.c | 2 +-
4 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/isdn/hardware/eicon/debuglib.h b/drivers/isdn/hardware/eicon/debuglib.h
index 11b3b9e..016410c 100644
--- a/drivers/isdn/hardware/eicon/debuglib.h
+++ b/drivers/isdn/hardware/eicon/debuglib.h
@@ -177,7 +177,7 @@ DBG_DECL(PRV3)
} }
#endif
/*
- * For event level debug use a separate define, the paramete are
+ * For event level debug use a separate define, the parameter are
* different and cause compiler errors on some systems.
*/
#define DBG_EVL_ID(args) \
diff --git a/drivers/isdn/hardware/eicon/di.c b/drivers/isdn/hardware/eicon/di.c
index ce8df38..10760b3 100644
--- a/drivers/isdn/hardware/eicon/di.c
+++ b/drivers/isdn/hardware/eicon/di.c
@@ -285,7 +285,7 @@ byte pr_dpc(ADAPTER * a)
a->ram_in(a, &RcIn->RcId),
a->ram_in(a, &RcIn->RcCh),
a->ram_inw(a, &RcIn->Reference),
- tmp[0], /* type of extended informtion */
+ tmp[0], /* type of extended information */
tmp[1]); /* extended information */
a->ram_out(a, &RcIn->Rc, 0);
}
diff --git a/drivers/isdn/hardware/eicon/message.c b/drivers/isdn/hardware/eicon/message.c
index ccd35d0..b9177ca 100644
--- a/drivers/isdn/hardware/eicon/message.c
+++ b/drivers/isdn/hardware/eicon/message.c
@@ -4941,7 +4941,7 @@ void sig_ind(PLCI * plci)
/* b = IE1 */
/* S = IE1 length + cont. */
/* b = IE2 */
- /* S = IE2 lenght + cont. */
+ /* S = IE2 length + cont. */
sendf(plci->appl,
_MANUFACTURER_I,
Id,
diff --git a/drivers/isdn/hysdn/hycapi.c b/drivers/isdn/hysdn/hycapi.c
index f854501..d3999a8 100644
--- a/drivers/isdn/hysdn/hycapi.c
+++ b/drivers/isdn/hysdn/hycapi.c
@@ -541,7 +541,7 @@ hycapi_rx_capipkt(hysdn_card * card, unsigned char *buf, unsigned short len)
}
ctrl = &cinfo->capi_ctrl;
if(len < CAPI_MSG_BASELEN) {
- printk(KERN_ERR "HYSDN Card%d: invalid CAPI-message, lenght %d!\n",
+ printk(KERN_ERR "HYSDN Card%d: invalid CAPI-message, length %d!\n",
card->myid, len);
return;
}
--
1.5.3.7.949.g2221a6
^ permalink raw reply related [flat|nested] 34+ messages in thread* [PATCH] drivers/macintosh/: Spelling fixes
@ 2007-12-17 19:30 ` Joe Perches
0 siblings, 0 replies; 34+ messages in thread
From: Joe Perches @ 2007-12-17 19:30 UTC (permalink / raw)
To: linux-kernel; +Cc: Andrew Morton
Signed-off-by: Joe Perches <joe@perches.com>
---
drivers/macintosh/smu.c | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/macintosh/smu.c b/drivers/macintosh/smu.c
index d409f67..8ba4938 100644
--- a/drivers/macintosh/smu.c
+++ b/drivers/macintosh/smu.c
@@ -12,7 +12,7 @@
* - maybe add timeout to commands ?
* - blocking version of time functions
* - polling version of i2c commands (including timer that works with
- * interrutps off)
+ * interrupts off)
* - maybe avoid some data copies with i2c by directly using the smu cmd
* buffer and a lower level internal interface
* - understand SMU -> CPU events and implement reception of them via
@@ -179,7 +179,7 @@ static irqreturn_t smu_db_intr(int irq, void *arg)
/* CPU might have brought back the cache line, so we need
* to flush again before peeking at the SMU response. We
* flush the entire buffer for now as we haven't read the
- * reply lenght (it's only 2 cache lines anyway)
+ * reply length (it's only 2 cache lines anyway)
*/
faddr = (unsigned long)smu->cmd_buf;
flush_inval_dcache_range(faddr, faddr + 256);
--
1.5.3.7.949.g2221a6
^ permalink raw reply related [flat|nested] 34+ messages in thread
* [PATCH] drivers/media/: Spelling fixes
@ 2007-12-17 19:30 ` Joe Perches
0 siblings, 0 replies; 34+ messages in thread
From: Joe Perches @ 2007-12-17 19:30 UTC (permalink / raw)
To: linux-kernel
Cc: Andrew Morton, LinuxTV.org Project, Mauro Carvalho Chehab,
Michael Hunold, Mike Isely, Ronald Bultje, mjpeg-users,
video4linux-list
Signed-off-by: Joe Perches <joe@perches.com>
---
drivers/media/common/saa7146_core.c | 2 +-
drivers/media/dvb/dvb-core/dvb_net.c | 2 +-
drivers/media/video/bt8xx/bttv-cards.c | 2 +-
drivers/media/video/bt8xx/bttv-driver.c | 2 +-
drivers/media/video/indycam.c | 2 +-
drivers/media/video/mt20xx.c | 2 +-
drivers/media/video/pvrusb2/pvrusb2.h | 2 +-
drivers/media/video/tea6420.c | 2 +-
drivers/media/video/usbvideo/quickcam_messenger.c | 2 +-
drivers/media/video/usbvision/usbvision-video.c | 2 +-
drivers/media/video/vpx3220.c | 2 +-
drivers/media/video/zoran_card.c | 2 +-
drivers/media/video/zr36050.c | 2 +-
drivers/media/video/zr36060.c | 2 +-
14 files changed, 14 insertions(+), 14 deletions(-)
diff --git a/drivers/media/common/saa7146_core.c b/drivers/media/common/saa7146_core.c
index 7d04a6f..168a8d3 100644
--- a/drivers/media/common/saa7146_core.c
+++ b/drivers/media/common/saa7146_core.c
@@ -388,7 +388,7 @@ static int saa7146_init_one(struct pci_dev *pci, const struct pci_device_id *ent
}
dev->revision &= 0xf;
- /* remap the memory from virtual to physical adress */
+ /* remap the memory from virtual to physical address */
err = pci_request_region(pci, 0, "saa7146");
if (err < 0)
diff --git a/drivers/media/dvb/dvb-core/dvb_net.c b/drivers/media/dvb/dvb-core/dvb_net.c
index a33eb59..ed3f826 100644
--- a/drivers/media/dvb/dvb-core/dvb_net.c
+++ b/drivers/media/dvb/dvb-core/dvb_net.c
@@ -681,7 +681,7 @@ static void dvb_net_ule( struct net_device *dev, const u8 *buf, size_t buf_len )
drop = 1;
/* else: destination address matches the MAC address of our receiver device */
}
- /* else: promiscious mode; pass everything up the stack */
+ /* else: promiscuous mode; pass everything up the stack */
if (drop) {
#ifdef ULE_DEBUG
diff --git a/drivers/media/video/bt8xx/bttv-cards.c b/drivers/media/video/bt8xx/bttv-cards.c
index 585d1ef..9a80277 100644
--- a/drivers/media/video/bt8xx/bttv-cards.c
+++ b/drivers/media/video/bt8xx/bttv-cards.c
@@ -4732,7 +4732,7 @@ static void rv605_muxsel(struct bttv *btv, unsigned int input)
gpio_bits(0x200,0x000);
mdelay(1);
- /* create a new conection */
+ /* create a new connection */
gpio_bits(0x480,0x080);
gpio_bits(0x480,0x480);
mdelay(1);
diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c
index c02d92d..5c41e49 100644
--- a/drivers/media/video/bt8xx/bttv-driver.c
+++ b/drivers/media/video/bt8xx/bttv-driver.c
@@ -3624,7 +3624,7 @@ static int bttv_ioctl(struct inode *inode, struct file *file,
fh->vbi_fmt.fmt.start[1] != tvnorm->vbistart[1] ||
fh->vbi_fmt.fmt.count[0] != fh->vbi_fmt.fmt.count[1]) {
/* BTTV_VBISIZE cannot express these parameters,
- however open() resets the paramters to defaults
+ however open() resets the parameters to defaults
and apps shouldn't call BTTV_VBISIZE after
VIDIOC_S_FMT. */
return -EINVAL;
diff --git a/drivers/media/video/indycam.c b/drivers/media/video/indycam.c
index 5c2c402..84b9e4f 100644
--- a/drivers/media/video/indycam.c
+++ b/drivers/media/video/indycam.c
@@ -326,7 +326,7 @@ static int indycam_attach(struct i2c_adapter *adap, int addr, int kind)
// initialize
err = indycam_write_block(client, 0, sizeof(initseq), (u8 *)&initseq);
if (err) {
- printk(KERN_ERR "IndyCam initalization failed\n");
+ printk(KERN_ERR "IndyCam initialization failed\n");
err = -EIO;
goto out_detach_client;
}
diff --git a/drivers/media/video/mt20xx.c b/drivers/media/video/mt20xx.c
index f49d1f4..e6dc674 100644
--- a/drivers/media/video/mt20xx.c
+++ b/drivers/media/video/mt20xx.c
@@ -369,7 +369,7 @@ static struct dvb_tuner_ops mt2032_tuner_ops = {
.get_frequency = microtune_get_frequency,
};
-// Initalization as described in "MT203x Programming Procedures", Rev 1.2, Feb.2001
+// Initialization as described in "MT203x Programming Procedures", Rev 1.2, Feb.2001
static int mt2032_init(struct dvb_frontend *fe)
{
struct microtune_priv *priv = fe->tuner_priv;
diff --git a/drivers/media/video/pvrusb2/pvrusb2.h b/drivers/media/video/pvrusb2/pvrusb2.h
index 074533e..1a9a4ba 100644
--- a/drivers/media/video/pvrusb2/pvrusb2.h
+++ b/drivers/media/video/pvrusb2/pvrusb2.h
@@ -27,7 +27,7 @@
might want to increase this - however the driver operation will not
be impaired if it is too small. Instead additional units just
won't have an ID assigned and it might not be possible to specify
- module paramters for those extra units. */
+ module parameters for those extra units. */
#define PVR_NUM 20
#endif /* __PVRUSB2_H */
diff --git a/drivers/media/video/tea6420.c b/drivers/media/video/tea6420.c
index e0ff811..ca05cd6 100644
--- a/drivers/media/video/tea6420.c
+++ b/drivers/media/video/tea6420.c
@@ -57,7 +57,7 @@ static int tea6420_switch(struct i2c_client *client, int i, int o, int g)
dprintk("adr:0x%02x, i:%d, o:%d, g:%d\n", client->addr, i, o, g);
- /* check if the paramters are valid */
+ /* check if the parameters are valid */
if (i < 1 || i > 6 || o < 1 || o > 4 || g < 0 || g > 6 || g % 2 != 0)
return -1;
diff --git a/drivers/media/video/usbvideo/quickcam_messenger.c b/drivers/media/video/usbvideo/quickcam_messenger.c
index d847273..5e7b795 100644
--- a/drivers/media/video/usbvideo/quickcam_messenger.c
+++ b/drivers/media/video/usbvideo/quickcam_messenger.c
@@ -258,7 +258,7 @@ static void qcm_hsv2rgb(u16 hue, u16 sat, u16 val, u16 *r, u16 *g, u16 *b)
unsigned int p;
/*
- the registers controling gain are 8 bit of which
+ the registers controlling gain are 8 bit of which
we affect only the last 4 bits with our gain.
we know that if saturation is 0, (unsaturated) then
we're grayscale (center axis of the colour cone) so
diff --git a/drivers/media/video/usbvision/usbvision-video.c b/drivers/media/video/usbvision/usbvision-video.c
index 36e689f..14297d9 100644
--- a/drivers/media/video/usbvision/usbvision-video.c
+++ b/drivers/media/video/usbvision/usbvision-video.c
@@ -131,7 +131,7 @@ static struct usbvision_v4l2_format_st usbvision_v4l2_format[] = {
/* Function prototypes */
static void usbvision_release(struct usb_usbvision *usbvision);
-/* Default initalization of device driver parameters */
+/* Default initialization of device driver parameters */
/* Set the default format for ISOC endpoint */
static int isocMode = ISOC_MODE_COMPRESS;
/* Set the default Debug Mode of the device driver */
diff --git a/drivers/media/video/vpx3220.c b/drivers/media/video/vpx3220.c
index 8ef31ed..a913385 100644
--- a/drivers/media/video/vpx3220.c
+++ b/drivers/media/video/vpx3220.c
@@ -566,7 +566,7 @@ vpx3220_init_client (struct i2c_client *client)
}
/* -----------------------------------------------------------------------
- * Client managment code
+ * Client management code
*/
/*
diff --git a/drivers/media/video/zoran_card.c b/drivers/media/video/zoran_card.c
index 6e0ac4c..690281b 100644
--- a/drivers/media/video/zoran_card.c
+++ b/drivers/media/video/zoran_card.c
@@ -1270,7 +1270,7 @@ zoran_setup_videocodec (struct zoran *zr,
}
/*
- * Scan for a Buz card (actually for the PCI contoler ZR36057),
+ * Scan for a Buz card (actually for the PCI controller ZR36057),
* request the irq and map the io memory
*/
static int __devinit
diff --git a/drivers/media/video/zr36050.c b/drivers/media/video/zr36050.c
index 9f622e0..faae4ec 100644
--- a/drivers/media/video/zr36050.c
+++ b/drivers/media/video/zr36050.c
@@ -161,7 +161,7 @@ zr36050_wait_end (struct zr36050 *ptr)
udelay(1);
if (i++ > 200000) { // 200ms, there is for sure something wrong!!!
dprintk(1,
- "%s: timout at wait_end (last status: 0x%02x)\n",
+ "%s: timeout at wait_end (last status: 0x%02x)\n",
ptr->name, ptr->status1);
break;
}
diff --git a/drivers/media/video/zr36060.c b/drivers/media/video/zr36060.c
index 1ef14fe..7849b65 100644
--- a/drivers/media/video/zr36060.c
+++ b/drivers/media/video/zr36060.c
@@ -163,7 +163,7 @@ zr36060_wait_end (struct zr36060 *ptr)
udelay(1);
if (i++ > 200000) { // 200ms, there is for sure something wrong!!!
dprintk(1,
- "%s: timout at wait_end (last status: 0x%02x)\n",
+ "%s: timeout at wait_end (last status: 0x%02x)\n",
ptr->name, ptr->status);
break;
}
--
1.5.3.7.949.g2221a6
^ permalink raw reply related [flat|nested] 34+ messages in thread* [PATCH] include/media/: Spelling fixes
@ 2007-12-17 19:30 ` Joe Perches
0 siblings, 0 replies; 34+ messages in thread
From: Joe Perches @ 2007-12-17 19:30 UTC (permalink / raw)
To: linux-kernel
Cc: Andrew Morton, LinuxTV.org Project, Mauro Carvalho Chehab,
video4linux-list
Signed-off-by: Joe Perches <joe@perches.com>
---
include/media/rds.h | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/include/media/rds.h b/include/media/rds.h
index 951c1ae..a894266 100644
--- a/include/media/rds.h
+++ b/include/media/rds.h
@@ -4,7 +4,7 @@
saa6588.c and every driver (e.g. bttv-driver.c) that wants
to use the saa6588 module.
- Instead of having a seperate rds.h, I'd prefer to include
+ Instead of having a separate rds.h, I'd prefer to include
this stuff in one of the already existing files like tuner.h
(c) 2005 by Hans J. Koch
--
1.5.3.7.949.g2221a6
^ permalink raw reply related [flat|nested] 34+ messages in thread* [PATCH] drivers/message/: Spelling fixes
@ 2007-12-17 19:30 ` Joe Perches
0 siblings, 0 replies; 34+ messages in thread
From: Joe Perches @ 2007-12-17 19:30 UTC (permalink / raw)
To: linux-kernel; +Cc: Andrew Morton, MPT Fusion Linux Team, linux-scsi, support
Signed-off-by: Joe Perches <joe@perches.com>
---
drivers/message/fusion/mptctl.c | 8 ++++----
drivers/message/fusion/mptscsih.c | 2 +-
drivers/message/i2o/iop.c | 2 +-
3 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/message/fusion/mptctl.c b/drivers/message/fusion/mptctl.c
index 6029509..e630b50 100644
--- a/drivers/message/fusion/mptctl.c
+++ b/drivers/message/fusion/mptctl.c
@@ -1708,7 +1708,7 @@ mptctl_replace_fw (unsigned long arg)
*
* Outputs: None.
* Return: 0 if successful
- * -EBUSY if previous command timout and IOC reset is not complete.
+ * -EBUSY if previous command timeout and IOC reset is not complete.
* -EFAULT if data unavailable
* -ENODEV if no such device/adapter
* -ETIME if timer expires
@@ -1748,7 +1748,7 @@ mptctl_mpt_command (unsigned long arg)
*
* Outputs: None.
* Return: 0 if successful
- * -EBUSY if previous command timout and IOC reset is not complete.
+ * -EBUSY if previous command timeout and IOC reset is not complete.
* -EFAULT if data unavailable
* -ENODEV if no such device/adapter
* -ETIME if timer expires
@@ -2316,7 +2316,7 @@ done_free_mem:
* Outputs: None.
* Return: 0 if successful
* -EFAULT if data unavailable
- * -EBUSY if previous command timout and IOC reset is not complete.
+ * -EBUSY if previous command timeout and IOC reset is not complete.
* -ENODEV if no such device/adapter
* -ETIME if timer expires
* -ENOMEM if memory allocation error
@@ -2553,7 +2553,7 @@ mptctl_hp_hostinfo(unsigned long arg, unsigned int data_size)
* Outputs: None.
* Return: 0 if successful
* -EFAULT if data unavailable
- * -EBUSY if previous command timout and IOC reset is not complete.
+ * -EBUSY if previous command timeout and IOC reset is not complete.
* -ENODEV if no such device/adapter
* -ETIME if timer expires
* -ENOMEM if memory allocation error
diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c
index 626bb3c..7d3d2de 100644
--- a/drivers/message/fusion/mptscsih.c
+++ b/drivers/message/fusion/mptscsih.c
@@ -1736,7 +1736,7 @@ mptscsih_IssueTaskMgmt(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 id, int lun, i
fail_out:
/*
- * Free task managment mf, and corresponding tm flags
+ * Free task management mf, and corresponding tm flags
*/
mpt_free_msg_frame(ioc, mf);
hd->tmPending = 0;
diff --git a/drivers/message/i2o/iop.c b/drivers/message/i2o/iop.c
index 7814a06..da715e1 100644
--- a/drivers/message/i2o/iop.c
+++ b/drivers/message/i2o/iop.c
@@ -916,7 +916,7 @@ static int i2o_parse_hrt(struct i2o_controller *c)
* status block. The status block could then be accessed through
* c->status_block.
*
- * Returns 0 on sucess or negative error code on failure.
+ * Returns 0 on success or negative error code on failure.
*/
int i2o_status_get(struct i2o_controller *c)
{
--
1.5.3.7.949.g2221a6
^ permalink raw reply related [flat|nested] 34+ messages in thread* [PATCH] drivers/mtd/: Spelling fixes
@ 2007-12-17 19:30 ` Joe Perches
0 siblings, 0 replies; 34+ messages in thread
From: Joe Perches @ 2007-12-17 19:30 UTC (permalink / raw)
To: linux-kernel; +Cc: linux-mtd, Andrew Morton, David Woodhouse, Vincent Sanders
Signed-off-by: Joe Perches <joe@perches.com>
---
drivers/mtd/nand/autcpu12.c | 6 +++---
drivers/mtd/nand/bf5xx_nand.c | 2 +-
drivers/mtd/nand/cs553x_nand.c | 2 +-
drivers/mtd/nand/edb7312.c | 2 +-
drivers/mtd/nand/nand_base.c | 2 +-
drivers/mtd/nand/nandsim.c | 2 +-
drivers/mtd/nand/s3c2410.c | 2 +-
drivers/mtd/nand/sharpsl.c | 2 +-
8 files changed, 10 insertions(+), 10 deletions(-)
diff --git a/drivers/mtd/nand/autcpu12.c b/drivers/mtd/nand/autcpu12.c
index e3744eb..dd38011 100644
--- a/drivers/mtd/nand/autcpu12.c
+++ b/drivers/mtd/nand/autcpu12.c
@@ -20,7 +20,7 @@
*
* 02-12-2002 TG Cleanup of module params
*
- * 02-20-2002 TG adjusted for different rd/wr adress support
+ * 02-20-2002 TG adjusted for different rd/wr address support
* added support for read device ready/busy line
* added page_cache
*
@@ -144,7 +144,7 @@ static int __init autcpu12_init(void)
goto out;
}
- /* map physical adress */
+ /* map physical address */
autcpu12_fio_base = ioremap(AUTCPU12_PHYS_SMC, SZ_1K);
if (!autcpu12_fio_base) {
printk("Ioremap autcpu12 SmartMedia Card failed\n");
@@ -227,7 +227,7 @@ static void __exit autcpu12_cleanup(void)
/* Release resources, unregister device */
nand_release(autcpu12_mtd);
- /* unmap physical adress */
+ /* unmap physical address */
iounmap(autcpu12_fio_base);
/* Free the MTD device structure */
diff --git a/drivers/mtd/nand/bf5xx_nand.c b/drivers/mtd/nand/bf5xx_nand.c
index 1657ecd..a52f3a7 100644
--- a/drivers/mtd/nand/bf5xx_nand.c
+++ b/drivers/mtd/nand/bf5xx_nand.c
@@ -4,7 +4,7 @@
* http://blackfin.uclinux.org/
* Bryan Wu <bryan.wu@analog.com>
*
- * Blackfin BF5xx on-chip NAND flash controler driver
+ * Blackfin BF5xx on-chip NAND flash controller driver
*
* Derived from drivers/mtd/nand/s3c2410.c
* Copyright (c) 2007 Ben Dooks <ben@simtec.co.uk>
diff --git a/drivers/mtd/nand/cs553x_nand.c b/drivers/mtd/nand/cs553x_nand.c
index 89deff0..19e1594 100644
--- a/drivers/mtd/nand/cs553x_nand.c
+++ b/drivers/mtd/nand/cs553x_nand.c
@@ -337,7 +337,7 @@ static void __exit cs553x_cleanup(void)
nand_release(cs553x_mtd[i]);
cs553x_mtd[i] = NULL;
- /* unmap physical adress */
+ /* unmap physical address */
iounmap(mmio_base);
/* Free the MTD device structure */
diff --git a/drivers/mtd/nand/edb7312.c b/drivers/mtd/nand/edb7312.c
index 0146cdc..ba67bbe 100644
--- a/drivers/mtd/nand/edb7312.c
+++ b/drivers/mtd/nand/edb7312.c
@@ -125,7 +125,7 @@ static int __init ep7312_init(void)
return -ENOMEM;
}
- /* map physical adress */
+ /* map physical address */
ep7312_fio_base = ioremap(ep7312_fio_pbase, SZ_1K);
if (!ep7312_fio_base) {
printk("ioremap EDB7312 NAND flash failed\n");
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index e29c1da..ddd4fc0 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -89,7 +89,7 @@ static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
struct mtd_oob_ops *ops);
/*
- * For devices which display every fart in the system on a seperate LED. Is
+ * For devices which display every fart in the system on a separate LED. Is
* compiled away when LED support is disabled.
*/
DEFINE_LED_TRIGGER(nand_led_trigger);
diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c
index 10490b4..bb885d1 100644
--- a/drivers/mtd/nand/nandsim.c
+++ b/drivers/mtd/nand/nandsim.c
@@ -210,7 +210,7 @@ MODULE_PARM_DESC(overridesize, "Specifies the NAND Flash size overriding the I
#define STATE_CMD_RESET 0x0000000C /* reset */
#define STATE_CMD_MASK 0x0000000F /* command states mask */
-/* After an addres is input, the simulator goes to one of these states */
+/* After an address is input, the simulator goes to one of these states */
#define STATE_ADDR_PAGE 0x00000010 /* full (row, column) address is accepted */
#define STATE_ADDR_SEC 0x00000020 /* sector address was accepted */
#define STATE_ADDR_ZERO 0x00000030 /* one byte zero address was accepted */
diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c
index 66f76e9..2bd0737 100644
--- a/drivers/mtd/nand/s3c2410.c
+++ b/drivers/mtd/nand/s3c2410.c
@@ -8,7 +8,7 @@
*
* Changelog:
* 21-Sep-2004 BJD Initial version
- * 23-Sep-2004 BJD Mulitple device support
+ * 23-Sep-2004 BJD Multiple device support
* 28-Sep-2004 BJD Fixed ECC placement for Hardware mode
* 12-Oct-2004 BJD Fixed errors in use of platform data
* 18-Feb-2005 BJD Fix sparse errors
diff --git a/drivers/mtd/nand/sharpsl.c b/drivers/mtd/nand/sharpsl.c
index 51c7288..033f880 100644
--- a/drivers/mtd/nand/sharpsl.c
+++ b/drivers/mtd/nand/sharpsl.c
@@ -165,7 +165,7 @@ static int __init sharpsl_nand_init(void)
return -ENOMEM;
}
- /* map physical adress */
+ /* map physical address */
sharpsl_io_base = ioremap(sharpsl_phys_base, 0x1000);
if (!sharpsl_io_base) {
printk("ioremap to access Sharp SL NAND chip failed\n");
--
1.5.3.7.949.g2221a6
^ permalink raw reply related [flat|nested] 34+ messages in thread* [PATCH] drivers/mtd/: Spelling fixes
@ 2007-12-17 19:30 ` Joe Perches
0 siblings, 0 replies; 34+ messages in thread
From: Joe Perches @ 2007-12-17 19:30 UTC (permalink / raw)
To: linux-kernel; +Cc: Andrew Morton, David Woodhouse, Vincent Sanders, linux-mtd
Signed-off-by: Joe Perches <joe@perches.com>
---
drivers/mtd/nand/autcpu12.c | 6 +++---
drivers/mtd/nand/bf5xx_nand.c | 2 +-
drivers/mtd/nand/cs553x_nand.c | 2 +-
drivers/mtd/nand/edb7312.c | 2 +-
drivers/mtd/nand/nand_base.c | 2 +-
drivers/mtd/nand/nandsim.c | 2 +-
drivers/mtd/nand/s3c2410.c | 2 +-
drivers/mtd/nand/sharpsl.c | 2 +-
8 files changed, 10 insertions(+), 10 deletions(-)
diff --git a/drivers/mtd/nand/autcpu12.c b/drivers/mtd/nand/autcpu12.c
index e3744eb..dd38011 100644
--- a/drivers/mtd/nand/autcpu12.c
+++ b/drivers/mtd/nand/autcpu12.c
@@ -20,7 +20,7 @@
*
* 02-12-2002 TG Cleanup of module params
*
- * 02-20-2002 TG adjusted for different rd/wr adress support
+ * 02-20-2002 TG adjusted for different rd/wr address support
* added support for read device ready/busy line
* added page_cache
*
@@ -144,7 +144,7 @@ static int __init autcpu12_init(void)
goto out;
}
- /* map physical adress */
+ /* map physical address */
autcpu12_fio_base = ioremap(AUTCPU12_PHYS_SMC, SZ_1K);
if (!autcpu12_fio_base) {
printk("Ioremap autcpu12 SmartMedia Card failed\n");
@@ -227,7 +227,7 @@ static void __exit autcpu12_cleanup(void)
/* Release resources, unregister device */
nand_release(autcpu12_mtd);
- /* unmap physical adress */
+ /* unmap physical address */
iounmap(autcpu12_fio_base);
/* Free the MTD device structure */
diff --git a/drivers/mtd/nand/bf5xx_nand.c b/drivers/mtd/nand/bf5xx_nand.c
index 1657ecd..a52f3a7 100644
--- a/drivers/mtd/nand/bf5xx_nand.c
+++ b/drivers/mtd/nand/bf5xx_nand.c
@@ -4,7 +4,7 @@
* http://blackfin.uclinux.org/
* Bryan Wu <bryan.wu@analog.com>
*
- * Blackfin BF5xx on-chip NAND flash controler driver
+ * Blackfin BF5xx on-chip NAND flash controller driver
*
* Derived from drivers/mtd/nand/s3c2410.c
* Copyright (c) 2007 Ben Dooks <ben@simtec.co.uk>
diff --git a/drivers/mtd/nand/cs553x_nand.c b/drivers/mtd/nand/cs553x_nand.c
index 89deff0..19e1594 100644
--- a/drivers/mtd/nand/cs553x_nand.c
+++ b/drivers/mtd/nand/cs553x_nand.c
@@ -337,7 +337,7 @@ static void __exit cs553x_cleanup(void)
nand_release(cs553x_mtd[i]);
cs553x_mtd[i] = NULL;
- /* unmap physical adress */
+ /* unmap physical address */
iounmap(mmio_base);
/* Free the MTD device structure */
diff --git a/drivers/mtd/nand/edb7312.c b/drivers/mtd/nand/edb7312.c
index 0146cdc..ba67bbe 100644
--- a/drivers/mtd/nand/edb7312.c
+++ b/drivers/mtd/nand/edb7312.c
@@ -125,7 +125,7 @@ static int __init ep7312_init(void)
return -ENOMEM;
}
- /* map physical adress */
+ /* map physical address */
ep7312_fio_base = ioremap(ep7312_fio_pbase, SZ_1K);
if (!ep7312_fio_base) {
printk("ioremap EDB7312 NAND flash failed\n");
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index e29c1da..ddd4fc0 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -89,7 +89,7 @@ static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
struct mtd_oob_ops *ops);
/*
- * For devices which display every fart in the system on a seperate LED. Is
+ * For devices which display every fart in the system on a separate LED. Is
* compiled away when LED support is disabled.
*/
DEFINE_LED_TRIGGER(nand_led_trigger);
diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c
index 10490b4..bb885d1 100644
--- a/drivers/mtd/nand/nandsim.c
+++ b/drivers/mtd/nand/nandsim.c
@@ -210,7 +210,7 @@ MODULE_PARM_DESC(overridesize, "Specifies the NAND Flash size overriding the I
#define STATE_CMD_RESET 0x0000000C /* reset */
#define STATE_CMD_MASK 0x0000000F /* command states mask */
-/* After an addres is input, the simulator goes to one of these states */
+/* After an address is input, the simulator goes to one of these states */
#define STATE_ADDR_PAGE 0x00000010 /* full (row, column) address is accepted */
#define STATE_ADDR_SEC 0x00000020 /* sector address was accepted */
#define STATE_ADDR_ZERO 0x00000030 /* one byte zero address was accepted */
diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c
index 66f76e9..2bd0737 100644
--- a/drivers/mtd/nand/s3c2410.c
+++ b/drivers/mtd/nand/s3c2410.c
@@ -8,7 +8,7 @@
*
* Changelog:
* 21-Sep-2004 BJD Initial version
- * 23-Sep-2004 BJD Mulitple device support
+ * 23-Sep-2004 BJD Multiple device support
* 28-Sep-2004 BJD Fixed ECC placement for Hardware mode
* 12-Oct-2004 BJD Fixed errors in use of platform data
* 18-Feb-2005 BJD Fix sparse errors
diff --git a/drivers/mtd/nand/sharpsl.c b/drivers/mtd/nand/sharpsl.c
index 51c7288..033f880 100644
--- a/drivers/mtd/nand/sharpsl.c
+++ b/drivers/mtd/nand/sharpsl.c
@@ -165,7 +165,7 @@ static int __init sharpsl_nand_init(void)
return -ENOMEM;
}
- /* map physical adress */
+ /* map physical address */
sharpsl_io_base = ioremap(sharpsl_phys_base, 0x1000);
if (!sharpsl_io_base) {
printk("ioremap to access Sharp SL NAND chip failed\n");
--
1.5.3.7.949.g2221a6
^ permalink raw reply related [flat|nested] 34+ messages in thread
* [PATCH] drivers/mtd/: Spelling fixes
@ 2007-12-17 19:36 ` Joe Perches
0 siblings, 0 replies; 34+ messages in thread
From: Joe Perches @ 2007-12-17 19:36 UTC (permalink / raw)
To: linux-kernel; +Cc: linux-mtd, Andrew Morton, David Woodhouse, Vincent Sanders
Signed-off-by: Joe Perches <joe@perches.com>
---
drivers/mtd/nand/autcpu12.c | 6 +++---
drivers/mtd/nand/bf5xx_nand.c | 2 +-
drivers/mtd/nand/cs553x_nand.c | 2 +-
drivers/mtd/nand/edb7312.c | 2 +-
drivers/mtd/nand/nand_base.c | 2 +-
drivers/mtd/nand/nandsim.c | 2 +-
drivers/mtd/nand/s3c2410.c | 2 +-
drivers/mtd/nand/sharpsl.c | 2 +-
8 files changed, 10 insertions(+), 10 deletions(-)
diff --git a/drivers/mtd/nand/autcpu12.c b/drivers/mtd/nand/autcpu12.c
index e3744eb..dd38011 100644
--- a/drivers/mtd/nand/autcpu12.c
+++ b/drivers/mtd/nand/autcpu12.c
@@ -20,7 +20,7 @@
*
* 02-12-2002 TG Cleanup of module params
*
- * 02-20-2002 TG adjusted for different rd/wr adress support
+ * 02-20-2002 TG adjusted for different rd/wr address support
* added support for read device ready/busy line
* added page_cache
*
@@ -144,7 +144,7 @@ static int __init autcpu12_init(void)
goto out;
}
- /* map physical adress */
+ /* map physical address */
autcpu12_fio_base = ioremap(AUTCPU12_PHYS_SMC, SZ_1K);
if (!autcpu12_fio_base) {
printk("Ioremap autcpu12 SmartMedia Card failed\n");
@@ -227,7 +227,7 @@ static void __exit autcpu12_cleanup(void)
/* Release resources, unregister device */
nand_release(autcpu12_mtd);
- /* unmap physical adress */
+ /* unmap physical address */
iounmap(autcpu12_fio_base);
/* Free the MTD device structure */
diff --git a/drivers/mtd/nand/bf5xx_nand.c b/drivers/mtd/nand/bf5xx_nand.c
index 1657ecd..a52f3a7 100644
--- a/drivers/mtd/nand/bf5xx_nand.c
+++ b/drivers/mtd/nand/bf5xx_nand.c
@@ -4,7 +4,7 @@
* http://blackfin.uclinux.org/
* Bryan Wu <bryan.wu@analog.com>
*
- * Blackfin BF5xx on-chip NAND flash controler driver
+ * Blackfin BF5xx on-chip NAND flash controller driver
*
* Derived from drivers/mtd/nand/s3c2410.c
* Copyright (c) 2007 Ben Dooks <ben@simtec.co.uk>
diff --git a/drivers/mtd/nand/cs553x_nand.c b/drivers/mtd/nand/cs553x_nand.c
index 89deff0..19e1594 100644
--- a/drivers/mtd/nand/cs553x_nand.c
+++ b/drivers/mtd/nand/cs553x_nand.c
@@ -337,7 +337,7 @@ static void __exit cs553x_cleanup(void)
nand_release(cs553x_mtd[i]);
cs553x_mtd[i] = NULL;
- /* unmap physical adress */
+ /* unmap physical address */
iounmap(mmio_base);
/* Free the MTD device structure */
diff --git a/drivers/mtd/nand/edb7312.c b/drivers/mtd/nand/edb7312.c
index 0146cdc..ba67bbe 100644
--- a/drivers/mtd/nand/edb7312.c
+++ b/drivers/mtd/nand/edb7312.c
@@ -125,7 +125,7 @@ static int __init ep7312_init(void)
return -ENOMEM;
}
- /* map physical adress */
+ /* map physical address */
ep7312_fio_base = ioremap(ep7312_fio_pbase, SZ_1K);
if (!ep7312_fio_base) {
printk("ioremap EDB7312 NAND flash failed\n");
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index e29c1da..ddd4fc0 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -89,7 +89,7 @@ static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
struct mtd_oob_ops *ops);
/*
- * For devices which display every fart in the system on a seperate LED. Is
+ * For devices which display every fart in the system on a separate LED. Is
* compiled away when LED support is disabled.
*/
DEFINE_LED_TRIGGER(nand_led_trigger);
diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c
index 10490b4..bb885d1 100644
--- a/drivers/mtd/nand/nandsim.c
+++ b/drivers/mtd/nand/nandsim.c
@@ -210,7 +210,7 @@ MODULE_PARM_DESC(overridesize, "Specifies the NAND Flash size overriding the I
#define STATE_CMD_RESET 0x0000000C /* reset */
#define STATE_CMD_MASK 0x0000000F /* command states mask */
-/* After an addres is input, the simulator goes to one of these states */
+/* After an address is input, the simulator goes to one of these states */
#define STATE_ADDR_PAGE 0x00000010 /* full (row, column) address is accepted */
#define STATE_ADDR_SEC 0x00000020 /* sector address was accepted */
#define STATE_ADDR_ZERO 0x00000030 /* one byte zero address was accepted */
diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c
index 66f76e9..2bd0737 100644
--- a/drivers/mtd/nand/s3c2410.c
+++ b/drivers/mtd/nand/s3c2410.c
@@ -8,7 +8,7 @@
*
* Changelog:
* 21-Sep-2004 BJD Initial version
- * 23-Sep-2004 BJD Mulitple device support
+ * 23-Sep-2004 BJD Multiple device support
* 28-Sep-2004 BJD Fixed ECC placement for Hardware mode
* 12-Oct-2004 BJD Fixed errors in use of platform data
* 18-Feb-2005 BJD Fix sparse errors
diff --git a/drivers/mtd/nand/sharpsl.c b/drivers/mtd/nand/sharpsl.c
index 51c7288..033f880 100644
--- a/drivers/mtd/nand/sharpsl.c
+++ b/drivers/mtd/nand/sharpsl.c
@@ -165,7 +165,7 @@ static int __init sharpsl_nand_init(void)
return -ENOMEM;
}
- /* map physical adress */
+ /* map physical address */
sharpsl_io_base = ioremap(sharpsl_phys_base, 0x1000);
if (!sharpsl_io_base) {
printk("ioremap to access Sharp SL NAND chip failed\n");
--
1.5.3.7.949.g2221a6
^ permalink raw reply related [flat|nested] 34+ messages in thread* [PATCH] drivers/mtd/: Spelling fixes
@ 2007-12-17 19:36 ` Joe Perches
0 siblings, 0 replies; 34+ messages in thread
From: Joe Perches @ 2007-12-17 19:36 UTC (permalink / raw)
To: linux-kernel; +Cc: Andrew Morton, David Woodhouse, Vincent Sanders, linux-mtd
Signed-off-by: Joe Perches <joe@perches.com>
---
drivers/mtd/nand/autcpu12.c | 6 +++---
drivers/mtd/nand/bf5xx_nand.c | 2 +-
drivers/mtd/nand/cs553x_nand.c | 2 +-
drivers/mtd/nand/edb7312.c | 2 +-
drivers/mtd/nand/nand_base.c | 2 +-
drivers/mtd/nand/nandsim.c | 2 +-
drivers/mtd/nand/s3c2410.c | 2 +-
drivers/mtd/nand/sharpsl.c | 2 +-
8 files changed, 10 insertions(+), 10 deletions(-)
diff --git a/drivers/mtd/nand/autcpu12.c b/drivers/mtd/nand/autcpu12.c
index e3744eb..dd38011 100644
--- a/drivers/mtd/nand/autcpu12.c
+++ b/drivers/mtd/nand/autcpu12.c
@@ -20,7 +20,7 @@
*
* 02-12-2002 TG Cleanup of module params
*
- * 02-20-2002 TG adjusted for different rd/wr adress support
+ * 02-20-2002 TG adjusted for different rd/wr address support
* added support for read device ready/busy line
* added page_cache
*
@@ -144,7 +144,7 @@ static int __init autcpu12_init(void)
goto out;
}
- /* map physical adress */
+ /* map physical address */
autcpu12_fio_base = ioremap(AUTCPU12_PHYS_SMC, SZ_1K);
if (!autcpu12_fio_base) {
printk("Ioremap autcpu12 SmartMedia Card failed\n");
@@ -227,7 +227,7 @@ static void __exit autcpu12_cleanup(void)
/* Release resources, unregister device */
nand_release(autcpu12_mtd);
- /* unmap physical adress */
+ /* unmap physical address */
iounmap(autcpu12_fio_base);
/* Free the MTD device structure */
diff --git a/drivers/mtd/nand/bf5xx_nand.c b/drivers/mtd/nand/bf5xx_nand.c
index 1657ecd..a52f3a7 100644
--- a/drivers/mtd/nand/bf5xx_nand.c
+++ b/drivers/mtd/nand/bf5xx_nand.c
@@ -4,7 +4,7 @@
* http://blackfin.uclinux.org/
* Bryan Wu <bryan.wu@analog.com>
*
- * Blackfin BF5xx on-chip NAND flash controler driver
+ * Blackfin BF5xx on-chip NAND flash controller driver
*
* Derived from drivers/mtd/nand/s3c2410.c
* Copyright (c) 2007 Ben Dooks <ben@simtec.co.uk>
diff --git a/drivers/mtd/nand/cs553x_nand.c b/drivers/mtd/nand/cs553x_nand.c
index 89deff0..19e1594 100644
--- a/drivers/mtd/nand/cs553x_nand.c
+++ b/drivers/mtd/nand/cs553x_nand.c
@@ -337,7 +337,7 @@ static void __exit cs553x_cleanup(void)
nand_release(cs553x_mtd[i]);
cs553x_mtd[i] = NULL;
- /* unmap physical adress */
+ /* unmap physical address */
iounmap(mmio_base);
/* Free the MTD device structure */
diff --git a/drivers/mtd/nand/edb7312.c b/drivers/mtd/nand/edb7312.c
index 0146cdc..ba67bbe 100644
--- a/drivers/mtd/nand/edb7312.c
+++ b/drivers/mtd/nand/edb7312.c
@@ -125,7 +125,7 @@ static int __init ep7312_init(void)
return -ENOMEM;
}
- /* map physical adress */
+ /* map physical address */
ep7312_fio_base = ioremap(ep7312_fio_pbase, SZ_1K);
if (!ep7312_fio_base) {
printk("ioremap EDB7312 NAND flash failed\n");
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index e29c1da..ddd4fc0 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -89,7 +89,7 @@ static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
struct mtd_oob_ops *ops);
/*
- * For devices which display every fart in the system on a seperate LED. Is
+ * For devices which display every fart in the system on a separate LED. Is
* compiled away when LED support is disabled.
*/
DEFINE_LED_TRIGGER(nand_led_trigger);
diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c
index 10490b4..bb885d1 100644
--- a/drivers/mtd/nand/nandsim.c
+++ b/drivers/mtd/nand/nandsim.c
@@ -210,7 +210,7 @@ MODULE_PARM_DESC(overridesize, "Specifies the NAND Flash size overriding the I
#define STATE_CMD_RESET 0x0000000C /* reset */
#define STATE_CMD_MASK 0x0000000F /* command states mask */
-/* After an addres is input, the simulator goes to one of these states */
+/* After an address is input, the simulator goes to one of these states */
#define STATE_ADDR_PAGE 0x00000010 /* full (row, column) address is accepted */
#define STATE_ADDR_SEC 0x00000020 /* sector address was accepted */
#define STATE_ADDR_ZERO 0x00000030 /* one byte zero address was accepted */
diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c
index 66f76e9..2bd0737 100644
--- a/drivers/mtd/nand/s3c2410.c
+++ b/drivers/mtd/nand/s3c2410.c
@@ -8,7 +8,7 @@
*
* Changelog:
* 21-Sep-2004 BJD Initial version
- * 23-Sep-2004 BJD Mulitple device support
+ * 23-Sep-2004 BJD Multiple device support
* 28-Sep-2004 BJD Fixed ECC placement for Hardware mode
* 12-Oct-2004 BJD Fixed errors in use of platform data
* 18-Feb-2005 BJD Fix sparse errors
diff --git a/drivers/mtd/nand/sharpsl.c b/drivers/mtd/nand/sharpsl.c
index 51c7288..033f880 100644
--- a/drivers/mtd/nand/sharpsl.c
+++ b/drivers/mtd/nand/sharpsl.c
@@ -165,7 +165,7 @@ static int __init sharpsl_nand_init(void)
return -ENOMEM;
}
- /* map physical adress */
+ /* map physical address */
sharpsl_io_base = ioremap(sharpsl_phys_base, 0x1000);
if (!sharpsl_io_base) {
printk("ioremap to access Sharp SL NAND chip failed\n");
--
1.5.3.7.949.g2221a6
^ permalink raw reply related [flat|nested] 34+ messages in thread
* [PATCH] drivers/mtd/: Spelling fixes
@ 2007-12-17 19:40 ` Joe Perches
0 siblings, 0 replies; 34+ messages in thread
From: Joe Perches @ 2007-12-17 19:40 UTC (permalink / raw)
To: linux-kernel; +Cc: linux-mtd, Andrew Morton, David Woodhouse, Vincent Sanders
Signed-off-by: Joe Perches <joe@perches.com>
---
drivers/mtd/nand/autcpu12.c | 6 +++---
drivers/mtd/nand/bf5xx_nand.c | 2 +-
drivers/mtd/nand/cs553x_nand.c | 2 +-
drivers/mtd/nand/edb7312.c | 2 +-
drivers/mtd/nand/nand_base.c | 2 +-
drivers/mtd/nand/nandsim.c | 2 +-
drivers/mtd/nand/s3c2410.c | 2 +-
drivers/mtd/nand/sharpsl.c | 2 +-
8 files changed, 10 insertions(+), 10 deletions(-)
diff --git a/drivers/mtd/nand/autcpu12.c b/drivers/mtd/nand/autcpu12.c
index e3744eb..dd38011 100644
--- a/drivers/mtd/nand/autcpu12.c
+++ b/drivers/mtd/nand/autcpu12.c
@@ -20,7 +20,7 @@
*
* 02-12-2002 TG Cleanup of module params
*
- * 02-20-2002 TG adjusted for different rd/wr adress support
+ * 02-20-2002 TG adjusted for different rd/wr address support
* added support for read device ready/busy line
* added page_cache
*
@@ -144,7 +144,7 @@ static int __init autcpu12_init(void)
goto out;
}
- /* map physical adress */
+ /* map physical address */
autcpu12_fio_base = ioremap(AUTCPU12_PHYS_SMC, SZ_1K);
if (!autcpu12_fio_base) {
printk("Ioremap autcpu12 SmartMedia Card failed\n");
@@ -227,7 +227,7 @@ static void __exit autcpu12_cleanup(void)
/* Release resources, unregister device */
nand_release(autcpu12_mtd);
- /* unmap physical adress */
+ /* unmap physical address */
iounmap(autcpu12_fio_base);
/* Free the MTD device structure */
diff --git a/drivers/mtd/nand/bf5xx_nand.c b/drivers/mtd/nand/bf5xx_nand.c
index 1657ecd..a52f3a7 100644
--- a/drivers/mtd/nand/bf5xx_nand.c
+++ b/drivers/mtd/nand/bf5xx_nand.c
@@ -4,7 +4,7 @@
* http://blackfin.uclinux.org/
* Bryan Wu <bryan.wu@analog.com>
*
- * Blackfin BF5xx on-chip NAND flash controler driver
+ * Blackfin BF5xx on-chip NAND flash controller driver
*
* Derived from drivers/mtd/nand/s3c2410.c
* Copyright (c) 2007 Ben Dooks <ben@simtec.co.uk>
diff --git a/drivers/mtd/nand/cs553x_nand.c b/drivers/mtd/nand/cs553x_nand.c
index 89deff0..19e1594 100644
--- a/drivers/mtd/nand/cs553x_nand.c
+++ b/drivers/mtd/nand/cs553x_nand.c
@@ -337,7 +337,7 @@ static void __exit cs553x_cleanup(void)
nand_release(cs553x_mtd[i]);
cs553x_mtd[i] = NULL;
- /* unmap physical adress */
+ /* unmap physical address */
iounmap(mmio_base);
/* Free the MTD device structure */
diff --git a/drivers/mtd/nand/edb7312.c b/drivers/mtd/nand/edb7312.c
index 0146cdc..ba67bbe 100644
--- a/drivers/mtd/nand/edb7312.c
+++ b/drivers/mtd/nand/edb7312.c
@@ -125,7 +125,7 @@ static int __init ep7312_init(void)
return -ENOMEM;
}
- /* map physical adress */
+ /* map physical address */
ep7312_fio_base = ioremap(ep7312_fio_pbase, SZ_1K);
if (!ep7312_fio_base) {
printk("ioremap EDB7312 NAND flash failed\n");
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index e29c1da..ddd4fc0 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -89,7 +89,7 @@ static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
struct mtd_oob_ops *ops);
/*
- * For devices which display every fart in the system on a seperate LED. Is
+ * For devices which display every fart in the system on a separate LED. Is
* compiled away when LED support is disabled.
*/
DEFINE_LED_TRIGGER(nand_led_trigger);
diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c
index 10490b4..bb885d1 100644
--- a/drivers/mtd/nand/nandsim.c
+++ b/drivers/mtd/nand/nandsim.c
@@ -210,7 +210,7 @@ MODULE_PARM_DESC(overridesize, "Specifies the NAND Flash size overriding the I
#define STATE_CMD_RESET 0x0000000C /* reset */
#define STATE_CMD_MASK 0x0000000F /* command states mask */
-/* After an addres is input, the simulator goes to one of these states */
+/* After an address is input, the simulator goes to one of these states */
#define STATE_ADDR_PAGE 0x00000010 /* full (row, column) address is accepted */
#define STATE_ADDR_SEC 0x00000020 /* sector address was accepted */
#define STATE_ADDR_ZERO 0x00000030 /* one byte zero address was accepted */
diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c
index 66f76e9..2bd0737 100644
--- a/drivers/mtd/nand/s3c2410.c
+++ b/drivers/mtd/nand/s3c2410.c
@@ -8,7 +8,7 @@
*
* Changelog:
* 21-Sep-2004 BJD Initial version
- * 23-Sep-2004 BJD Mulitple device support
+ * 23-Sep-2004 BJD Multiple device support
* 28-Sep-2004 BJD Fixed ECC placement for Hardware mode
* 12-Oct-2004 BJD Fixed errors in use of platform data
* 18-Feb-2005 BJD Fix sparse errors
diff --git a/drivers/mtd/nand/sharpsl.c b/drivers/mtd/nand/sharpsl.c
index 51c7288..033f880 100644
--- a/drivers/mtd/nand/sharpsl.c
+++ b/drivers/mtd/nand/sharpsl.c
@@ -165,7 +165,7 @@ static int __init sharpsl_nand_init(void)
return -ENOMEM;
}
- /* map physical adress */
+ /* map physical address */
sharpsl_io_base = ioremap(sharpsl_phys_base, 0x1000);
if (!sharpsl_io_base) {
printk("ioremap to access Sharp SL NAND chip failed\n");
--
1.5.3.7.949.g2221a6
^ permalink raw reply related [flat|nested] 34+ messages in thread* [PATCH] drivers/mtd/: Spelling fixes
@ 2007-12-17 19:40 ` Joe Perches
0 siblings, 0 replies; 34+ messages in thread
From: Joe Perches @ 2007-12-17 19:40 UTC (permalink / raw)
To: linux-kernel; +Cc: Andrew Morton, David Woodhouse, Vincent Sanders, linux-mtd
Signed-off-by: Joe Perches <joe@perches.com>
---
drivers/mtd/nand/autcpu12.c | 6 +++---
drivers/mtd/nand/bf5xx_nand.c | 2 +-
drivers/mtd/nand/cs553x_nand.c | 2 +-
drivers/mtd/nand/edb7312.c | 2 +-
drivers/mtd/nand/nand_base.c | 2 +-
drivers/mtd/nand/nandsim.c | 2 +-
drivers/mtd/nand/s3c2410.c | 2 +-
drivers/mtd/nand/sharpsl.c | 2 +-
8 files changed, 10 insertions(+), 10 deletions(-)
diff --git a/drivers/mtd/nand/autcpu12.c b/drivers/mtd/nand/autcpu12.c
index e3744eb..dd38011 100644
--- a/drivers/mtd/nand/autcpu12.c
+++ b/drivers/mtd/nand/autcpu12.c
@@ -20,7 +20,7 @@
*
* 02-12-2002 TG Cleanup of module params
*
- * 02-20-2002 TG adjusted for different rd/wr adress support
+ * 02-20-2002 TG adjusted for different rd/wr address support
* added support for read device ready/busy line
* added page_cache
*
@@ -144,7 +144,7 @@ static int __init autcpu12_init(void)
goto out;
}
- /* map physical adress */
+ /* map physical address */
autcpu12_fio_base = ioremap(AUTCPU12_PHYS_SMC, SZ_1K);
if (!autcpu12_fio_base) {
printk("Ioremap autcpu12 SmartMedia Card failed\n");
@@ -227,7 +227,7 @@ static void __exit autcpu12_cleanup(void)
/* Release resources, unregister device */
nand_release(autcpu12_mtd);
- /* unmap physical adress */
+ /* unmap physical address */
iounmap(autcpu12_fio_base);
/* Free the MTD device structure */
diff --git a/drivers/mtd/nand/bf5xx_nand.c b/drivers/mtd/nand/bf5xx_nand.c
index 1657ecd..a52f3a7 100644
--- a/drivers/mtd/nand/bf5xx_nand.c
+++ b/drivers/mtd/nand/bf5xx_nand.c
@@ -4,7 +4,7 @@
* http://blackfin.uclinux.org/
* Bryan Wu <bryan.wu@analog.com>
*
- * Blackfin BF5xx on-chip NAND flash controler driver
+ * Blackfin BF5xx on-chip NAND flash controller driver
*
* Derived from drivers/mtd/nand/s3c2410.c
* Copyright (c) 2007 Ben Dooks <ben@simtec.co.uk>
diff --git a/drivers/mtd/nand/cs553x_nand.c b/drivers/mtd/nand/cs553x_nand.c
index 89deff0..19e1594 100644
--- a/drivers/mtd/nand/cs553x_nand.c
+++ b/drivers/mtd/nand/cs553x_nand.c
@@ -337,7 +337,7 @@ static void __exit cs553x_cleanup(void)
nand_release(cs553x_mtd[i]);
cs553x_mtd[i] = NULL;
- /* unmap physical adress */
+ /* unmap physical address */
iounmap(mmio_base);
/* Free the MTD device structure */
diff --git a/drivers/mtd/nand/edb7312.c b/drivers/mtd/nand/edb7312.c
index 0146cdc..ba67bbe 100644
--- a/drivers/mtd/nand/edb7312.c
+++ b/drivers/mtd/nand/edb7312.c
@@ -125,7 +125,7 @@ static int __init ep7312_init(void)
return -ENOMEM;
}
- /* map physical adress */
+ /* map physical address */
ep7312_fio_base = ioremap(ep7312_fio_pbase, SZ_1K);
if (!ep7312_fio_base) {
printk("ioremap EDB7312 NAND flash failed\n");
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index e29c1da..ddd4fc0 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -89,7 +89,7 @@ static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
struct mtd_oob_ops *ops);
/*
- * For devices which display every fart in the system on a seperate LED. Is
+ * For devices which display every fart in the system on a separate LED. Is
* compiled away when LED support is disabled.
*/
DEFINE_LED_TRIGGER(nand_led_trigger);
diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c
index 10490b4..bb885d1 100644
--- a/drivers/mtd/nand/nandsim.c
+++ b/drivers/mtd/nand/nandsim.c
@@ -210,7 +210,7 @@ MODULE_PARM_DESC(overridesize, "Specifies the NAND Flash size overriding the I
#define STATE_CMD_RESET 0x0000000C /* reset */
#define STATE_CMD_MASK 0x0000000F /* command states mask */
-/* After an addres is input, the simulator goes to one of these states */
+/* After an address is input, the simulator goes to one of these states */
#define STATE_ADDR_PAGE 0x00000010 /* full (row, column) address is accepted */
#define STATE_ADDR_SEC 0x00000020 /* sector address was accepted */
#define STATE_ADDR_ZERO 0x00000030 /* one byte zero address was accepted */
diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c
index 66f76e9..2bd0737 100644
--- a/drivers/mtd/nand/s3c2410.c
+++ b/drivers/mtd/nand/s3c2410.c
@@ -8,7 +8,7 @@
*
* Changelog:
* 21-Sep-2004 BJD Initial version
- * 23-Sep-2004 BJD Mulitple device support
+ * 23-Sep-2004 BJD Multiple device support
* 28-Sep-2004 BJD Fixed ECC placement for Hardware mode
* 12-Oct-2004 BJD Fixed errors in use of platform data
* 18-Feb-2005 BJD Fix sparse errors
diff --git a/drivers/mtd/nand/sharpsl.c b/drivers/mtd/nand/sharpsl.c
index 51c7288..033f880 100644
--- a/drivers/mtd/nand/sharpsl.c
+++ b/drivers/mtd/nand/sharpsl.c
@@ -165,7 +165,7 @@ static int __init sharpsl_nand_init(void)
return -ENOMEM;
}
- /* map physical adress */
+ /* map physical address */
sharpsl_io_base = ioremap(sharpsl_phys_base, 0x1000);
if (!sharpsl_io_base) {
printk("ioremap to access Sharp SL NAND chip failed\n");
--
1.5.3.7.949.g2221a6
^ permalink raw reply related [flat|nested] 34+ messages in thread
* [PATCH] drivers/net/: Spelling fixes
@ 2007-12-17 19:40 ` Joe Perches
0 siblings, 0 replies; 34+ messages in thread
From: Joe Perches @ 2007-12-17 19:40 UTC (permalink / raw)
To: linux-kernel
Cc: Pavel Roskin, David Gibson, orinoco-devel, Yi Zhu,
Jaroslav Kysela, linuxppc-dev, netdev, Paul Mackerras,
Peter De Shrijver, Rastapur Santosh, bonding-devel,
Andy Gospodarek, Amit S. Kale, ipw2100-devel, ipw3945-devel,
libertas-dev, Dan Williams, Jesse Brandeburg, Manish Lachwani,
Jean Tourrilhes, Jeff Kirsher, Arnaldo Carvalho de Melo,
Francois Romieu, Daniel Drake, Li Yang, Jeff Garzik, Jeb Cramer,
Chad Tindel, orinoco-users, Jay Cliburn, Samuel Ortiz,
Sivakumar Subramani, Jesse Huang, Mike Phillips, rt2400-devel,
Ulrich Kunitz, Chris Snook, cbe-oss-dev, Alexander Indenbaum,
Adam Fritzler, Auke Kok, Stefano Brivio, Haavard Skinnemoen,
tulip-users, linux-ppp, Ramkrishna Vepa, linux-wireless,
Corey Thomas, Sreenivasa Honnur, e1000-devel, John Ronciak,
atl1-devel, Ron Mercer, James Ketrenos, Andrew Morton,
Sorbica Shieh, Larry Finger
Signed-off-by: Joe Perches <joe@perches.com>
---
drivers/net/82596.c | 2 +-
drivers/net/amd8111e.c | 8 ++++----
drivers/net/amd8111e.h | 2 +-
drivers/net/appletalk/ltpc.c | 2 +-
drivers/net/atl1/atl1_hw.c | 2 +-
drivers/net/atl1/atl1_main.c | 2 +-
drivers/net/bonding/bond_3ad.c | 4 ++--
drivers/net/chelsio/sge.c | 2 +-
drivers/net/chelsio/subr.c | 2 +-
drivers/net/cxgb3/t3_hw.c | 2 +-
drivers/net/e1000/e1000_hw.c | 4 ++--
drivers/net/e1000/e1000_hw.h | 2 +-
drivers/net/e1000/e1000_main.c | 2 +-
drivers/net/e1000e/netdev.c | 2 +-
drivers/net/eepro.c | 2 +-
drivers/net/ehea/ehea.h | 2 +-
drivers/net/forcedeth.c | 2 +-
drivers/net/hamachi.c | 4 ++--
drivers/net/hp100.c | 2 +-
drivers/net/hp100.h | 4 ++--
drivers/net/ibm_emac/ibm_emac.h | 2 +-
drivers/net/ibm_newemac/emac.h | 2 +-
drivers/net/ibmlana.c | 2 +-
drivers/net/ibmlana.h | 2 +-
drivers/net/ipg.c | 4 ++--
drivers/net/irda/ali-ircc.c | 6 +++---
drivers/net/irda/ali-ircc.h | 4 ++--
drivers/net/irda/donauboe.h | 2 +-
drivers/net/irda/irport.c | 4 ++--
drivers/net/irda/nsc-ircc.h | 4 ++--
drivers/net/irda/smsc-ircc2.c | 4 ++--
drivers/net/irda/via-ircc.h | 4 ++--
drivers/net/ixgbe/ixgbe_common.c | 4 ++--
drivers/net/ixgbe/ixgbe_main.c | 2 +-
drivers/net/lasi_82596.c | 2 +-
drivers/net/lib82596.c | 2 +-
drivers/net/macb.c | 2 +-
drivers/net/meth.h | 2 +-
drivers/net/mv643xx_eth.c | 4 ++--
drivers/net/netxen/netxen_nic_hw.h | 2 +-
drivers/net/ppp_generic.c | 2 +-
drivers/net/ps3_gelic_net.c | 2 +-
drivers/net/qla3xxx.c | 2 +-
drivers/net/s2io.h | 2 +-
drivers/net/sis190.c | 2 +-
drivers/net/sk98lin/skgepnmi.c | 2 +-
drivers/net/sk98lin/skxmac2.c | 4 ++--
drivers/net/skfp/ess.c | 2 +-
drivers/net/skfp/fplustm.c | 6 +++---
drivers/net/skfp/h/fplustm.h | 4 ++--
drivers/net/skfp/h/smt.h | 2 +-
drivers/net/skfp/h/supern_2.h | 2 +-
drivers/net/smc911x.c | 2 +-
drivers/net/spider_net.c | 2 +-
drivers/net/sunbmac.h | 2 +-
drivers/net/sungem.c | 2 +-
drivers/net/sunhme.h | 2 +-
drivers/net/tc35815.c | 4 ++--
drivers/net/tehuti.c | 2 +-
drivers/net/tehuti.h | 2 +-
drivers/net/tokenring/3c359.c | 2 +-
drivers/net/tokenring/lanstreamer.c | 2 +-
drivers/net/tokenring/olympic.c | 2 +-
drivers/net/tokenring/smctr.c | 6 +++---
drivers/net/tokenring/tms380tr.c | 2 +-
drivers/net/tokenring/tms380tr.h | 2 +-
drivers/net/tulip/xircom_cb.c | 2 +-
drivers/net/tun.c | 4 ++--
drivers/net/ucc_geth_ethtool.c | 2 +-
drivers/net/ucc_geth_mii.c | 6 +++---
drivers/net/wan/cycx_drv.c | 4 ++--
drivers/net/wan/sbni.c | 2 +-
drivers/net/wireless/atmel.c | 2 +-
drivers/net/wireless/bcm43xx/bcm43xx_debugfs.h | 2 +-
drivers/net/wireless/ipw2200.c | 2 +-
drivers/net/wireless/iwlwifi/iwl-4965.c | 2 +-
drivers/net/wireless/libertas/cmd.c | 4 ++--
drivers/net/wireless/libertas/scan.c | 4 ++--
drivers/net/wireless/netwave_cs.c | 2 +-
drivers/net/wireless/orinoco.h | 2 +-
drivers/net/wireless/ray_cs.c | 2 +-
drivers/net/wireless/rt2x00/rt2x00reg.h | 2 +-
drivers/net/wireless/rt2x00/rt2x00usb.h | 6 +++---
drivers/net/wireless/rt2x00/rt73usb.c | 2 +-
drivers/net/wireless/wavelan_cs.c | 2 +-
drivers/net/wireless/zd1211rw/zd_chip.h | 4 ++--
drivers/net/yellowfin.c | 2 +-
87 files changed, 120 insertions(+), 120 deletions(-)
diff --git a/drivers/net/82596.c b/drivers/net/82596.c
index 2797da7..d999b63 100644
--- a/drivers/net/82596.c
+++ b/drivers/net/82596.c
@@ -19,7 +19,7 @@
TBD:
* look at deferring rx frames rather than discarding (as per tulip)
* handle tx ring full as per tulip
- * performace test to tune rx_copybreak
+ * performance test to tune rx_copybreak
Most of my modifications relate to the braindead big-endian
implementation by Intel. When the i596 is operating in
diff --git a/drivers/net/amd8111e.c b/drivers/net/amd8111e.c
index e7fdd81..5cefe92 100644
--- a/drivers/net/amd8111e.c
+++ b/drivers/net/amd8111e.c
@@ -1283,7 +1283,7 @@ static irqreturn_t amd8111e_interrupt(int irq, void *dev_id)
#ifdef CONFIG_AMD8111E_NAPI
if(intr0 & RINT0){
if(netif_rx_schedule_prep(dev, &lp->napi)){
- /* Disable receive interupts */
+ /* Disable receive interrupts */
writel(RINTEN0, mmio + INTEN0);
/* Schedule a polling routine */
__netif_rx_schedule(dev, &lp->napi);
@@ -1493,7 +1493,7 @@ static void amd8111e_read_regs(struct amd8111e_priv *lp, u32 *buf)
/*
-This function sets promiscuos mode, all-multi mode or the multicast address
+This function sets promiscuous mode, all-multi mode or the multicast address
list to the device.
*/
static void amd8111e_set_multicast_list(struct net_device *dev)
@@ -1522,7 +1522,7 @@ static void amd8111e_set_multicast_list(struct net_device *dev)
lp->mc_list = NULL;
lp->options &= ~OPTION_MULTICAST_ENABLE;
amd8111e_writeq(*(u64*)mc_filter,lp->mmio + LADRF);
- /* disable promiscous mode */
+ /* disable promiscuous mode */
writel(PROM, lp->mmio + CMD2);
return;
}
@@ -2016,7 +2016,7 @@ static int __devinit amd8111e_probe_one(struct pci_dev *pdev,
for(i = 0; i < ETH_ADDR_LEN; i++)
dev->dev_addr[i] = readb(lp->mmio + PADR + i);
- /* Setting user defined parametrs */
+ /* Setting user defined parameters */
lp->ext_phy_option = speed_duplex[card_idx];
if(coalesce[card_idx])
lp->options |= OPTION_INTR_COAL_ENABLE;
diff --git a/drivers/net/amd8111e.h b/drivers/net/amd8111e.h
index 28c60a7..7d288de 100644
--- a/drivers/net/amd8111e.h
+++ b/drivers/net/amd8111e.h
@@ -614,7 +614,7 @@ typedef enum {
#define CSTATE 1
#define SSTATE 2
-/* Assume contoller gets data 10 times the maximum processing time */
+/* Assume controller gets data 10 times the maximum processing time */
#define REPEAT_CNT 10
/* amd8111e decriptor flag definitions */
diff --git a/drivers/net/appletalk/ltpc.c b/drivers/net/appletalk/ltpc.c
index 6ab2c2d..86a9496 100644
--- a/drivers/net/appletalk/ltpc.c
+++ b/drivers/net/appletalk/ltpc.c
@@ -1233,7 +1233,7 @@ static int __init ltpc_setup(char *str)
if (ints[0] > 2) {
dma = ints[3];
}
- /* ignore any other paramters */
+ /* ignore any other parameters */
}
return 1;
}
diff --git a/drivers/net/atl1/atl1_hw.c b/drivers/net/atl1/atl1_hw.c
index 9d3bd22..82359f7 100644
--- a/drivers/net/atl1/atl1_hw.c
+++ b/drivers/net/atl1/atl1_hw.c
@@ -645,7 +645,7 @@ s32 atl1_init_hw(struct atl1_hw *hw)
atl1_init_flash_opcode(hw);
if (!hw->phy_configured) {
- /* enable GPHY LinkChange Interrrupt */
+ /* enable GPHY LinkChange Interrupt */
ret_val = atl1_write_phy_reg(hw, 18, 0xC00);
if (ret_val)
return ret_val;
diff --git a/drivers/net/atl1/atl1_main.c b/drivers/net/atl1/atl1_main.c
index 35b0a7d..7599163 100644
--- a/drivers/net/atl1/atl1_main.c
+++ b/drivers/net/atl1/atl1_main.c
@@ -575,7 +575,7 @@ static u32 atl1_check_link(struct atl1_adapter *adapter)
return ATL1_SUCCESS;
}
- /* change orignal link status */
+ /* change original link status */
if (netif_carrier_ok(netdev)) {
adapter->link_speed = SPEED_0;
netif_carrier_off(netdev);
diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c
index cb3c6fa..96f0f24 100644
--- a/drivers/net/bonding/bond_3ad.c
+++ b/drivers/net/bonding/bond_3ad.c
@@ -869,7 +869,7 @@ static int ad_lacpdu_send(struct port *port)
lacpdu_header = (struct lacpdu_header *)skb_put(skb, length);
lacpdu_header->ad_header.destination_address = lacpdu_multicast_address;
- /* Note: source addres is set to be the member's PERMANENT address, because we use it
+ /* Note: source address is set to be the member's PERMANENT address, because we use it
to identify loopback lacpdus in receive. */
lacpdu_header->ad_header.source_address = *((struct mac_addr *)(slave->perm_hwaddr));
lacpdu_header->ad_header.length_type = PKT_TYPE_LACPDU;
@@ -912,7 +912,7 @@ static int ad_marker_send(struct port *port, struct bond_marker *marker)
marker_header = (struct bond_marker_header *)skb_put(skb, length);
marker_header->ad_header.destination_address = lacpdu_multicast_address;
- /* Note: source addres is set to be the member's PERMANENT address, because we use it
+ /* Note: source address is set to be the member's PERMANENT address, because we use it
to identify loopback MARKERs in receive. */
marker_header->ad_header.source_address = *((struct mac_addr *)(slave->perm_hwaddr));
marker_header->ad_header.length_type = PKT_TYPE_LACPDU;
diff --git a/drivers/net/chelsio/sge.c b/drivers/net/chelsio/sge.c
index b301c04..ed17cd9 100644
--- a/drivers/net/chelsio/sge.c
+++ b/drivers/net/chelsio/sge.c
@@ -248,7 +248,7 @@ static void restart_sched(unsigned long);
*
* Interrupts are handled by a single CPU and it is likely that on a MP system
* the application is migrated to another CPU. In that scenario, we try to
- * seperate the RX(in irq context) and TX state in order to decrease memory
+ * separate the RX(in irq context) and TX state in order to decrease memory
* contention.
*/
struct sge {
diff --git a/drivers/net/chelsio/subr.c b/drivers/net/chelsio/subr.c
index dc50151..7c95578 100644
--- a/drivers/net/chelsio/subr.c
+++ b/drivers/net/chelsio/subr.c
@@ -559,7 +559,7 @@ struct chelsio_vpd_t {
#define EEPROM_MAX_POLL 4
/*
- * Read SEEPROM. A zero is written to the flag register when the addres is
+ * Read SEEPROM. A zero is written to the flag register when the address is
* written to the Control register. The hardware device will set the flag to a
* one when 4B have been transferred to the Data register.
*/
diff --git a/drivers/net/cxgb3/t3_hw.c b/drivers/net/cxgb3/t3_hw.c
index 522834c..2882e36 100644
--- a/drivers/net/cxgb3/t3_hw.c
+++ b/drivers/net/cxgb3/t3_hw.c
@@ -534,7 +534,7 @@ struct t3_vpd {
*
* Read a 32-bit word from a location in VPD EEPROM using the card's PCI
* VPD ROM capability. A zero is written to the flag bit when the
- * addres is written to the control register. The hardware device will
+ * address is written to the control register. The hardware device will
* set the flag to 1 when 4 bytes have been read into the data register.
*/
int t3_seeprom_read(struct adapter *adapter, u32 addr, u32 *data)
diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c
index 7c6888c..fd7e6a8 100644
--- a/drivers/net/e1000/e1000_hw.c
+++ b/drivers/net/e1000/e1000_hw.c
@@ -803,7 +803,7 @@ e1000_initialize_hardware_bits(struct e1000_hw *hw)
E1000_WRITE_REG(hw, CTRL, reg_ctrl);
break;
case e1000_80003es2lan:
- /* improve small packet performace for fiber/serdes */
+ /* improve small packet performance for fiber/serdes */
if ((hw->media_type == e1000_media_type_fiber) ||
(hw->media_type == e1000_media_type_internal_serdes)) {
reg_tarc0 &= ~(1 << 20);
@@ -5001,7 +5001,7 @@ e1000_read_eeprom(struct e1000_hw *hw,
return -E1000_ERR_EEPROM;
}
- /* Eerd register EEPROM access requires no eeprom aquire/release */
+ /* Eerd register EEPROM access requires no eeprom acquire/release */
if (eeprom->use_eerd == TRUE)
return e1000_read_eeprom_eerd(hw, offset, words, data);
diff --git a/drivers/net/e1000/e1000_hw.h b/drivers/net/e1000/e1000_hw.h
index a2a86c5..e40e515 100644
--- a/drivers/net/e1000/e1000_hw.h
+++ b/drivers/net/e1000/e1000_hw.h
@@ -1068,7 +1068,7 @@ struct e1000_ffvt_entry {
#define E1000_KUMCTRLSTA 0x00034 /* MAC-PHY interface - RW */
#define E1000_MDPHYA 0x0003C /* PHY address - RW */
-#define E1000_MANC2H 0x05860 /* Managment Control To Host - RW */
+#define E1000_MANC2H 0x05860 /* Management Control To Host - RW */
#define E1000_SW_FW_SYNC 0x05B5C /* Software-Firmware Synchronization - RW */
#define E1000_GCR 0x05B00 /* PCI-Ex Control */
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index 4f37506..24a2fc1 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -235,7 +235,7 @@ static struct pci_driver e1000_driver = {
.probe = e1000_probe,
.remove = __devexit_p(e1000_remove),
#ifdef CONFIG_PM
- /* Power Managment Hooks */
+ /* Power Management Hooks */
.suspend = e1000_suspend,
.resume = e1000_resume,
#endif
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index 4fd2e23..febe157 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -4109,7 +4109,7 @@ static struct pci_driver e1000_driver = {
.probe = e1000_probe,
.remove = __devexit_p(e1000_remove),
#ifdef CONFIG_PM
- /* Power Managment Hooks */
+ /* Power Management Hooks */
.suspend = e1000_suspend,
.resume = e1000_resume,
#endif
diff --git a/drivers/net/eepro.c b/drivers/net/eepro.c
index 83bda6c..d3789c5 100644
--- a/drivers/net/eepro.c
+++ b/drivers/net/eepro.c
@@ -1764,7 +1764,7 @@ module_param_array(io, int, NULL, 0);
module_param_array(irq, int, NULL, 0);
module_param_array(mem, int, NULL, 0);
module_param(autodetect, int, 0);
-MODULE_PARM_DESC(io, "EtherExpress Pro/10 I/O base addres(es)");
+MODULE_PARM_DESC(io, "EtherExpress Pro/10 I/O base address(es)");
MODULE_PARM_DESC(irq, "EtherExpress Pro/10 IRQ number(s)");
MODULE_PARM_DESC(mem, "EtherExpress Pro/10 Rx buffer size(es) in kB (3-29)");
MODULE_PARM_DESC(autodetect, "EtherExpress Pro/10 force board(s) detection (0-1)");
diff --git a/drivers/net/ehea/ehea.h b/drivers/net/ehea/ehea.h
index 5f82a46..a50b238 100644
--- a/drivers/net/ehea/ehea.h
+++ b/drivers/net/ehea/ehea.h
@@ -251,7 +251,7 @@ struct ehea_qp_init_attr {
};
/*
- * Event Queue attributes, passed as paramter
+ * Event Queue attributes, passed as parameter
*/
struct ehea_eq_attr {
u32 type;
diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index a96583c..7119332 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -490,7 +490,7 @@ union ring_type {
#define NV_RX3_VLAN_TAG_PRESENT (1<<16)
#define NV_RX3_VLAN_TAG_MASK (0x0000FFFF)
-/* Miscelaneous hardware related defines: */
+/* Miscellaneous hardware related defines: */
#define NV_PCI_REGSZ_VER1 0x270
#define NV_PCI_REGSZ_VER2 0x2d4
#define NV_PCI_REGSZ_VER3 0x604
diff --git a/drivers/net/hamachi.c b/drivers/net/hamachi.c
index ed407c8..683b289 100644
--- a/drivers/net/hamachi.c
+++ b/drivers/net/hamachi.c
@@ -86,7 +86,7 @@ static int force32;
static int options[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
static int full_duplex[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
/* The Hamachi chipset supports 3 parameters each for Rx and Tx
- * interruput management. Parameters will be loaded as specified into
+ * interrupt management. Parameters will be loaded as specified into
* the TxIntControl and RxIntControl registers.
*
* The registers are arranged as follows:
@@ -811,7 +811,7 @@ static int __devinit read_eeprom(void __iomem *ioaddr, int location)
return readb(ioaddr + EEData);
}
-/* MII Managemen Data I/O accesses.
+/* MII Management Data I/O accesses.
These routines assume the MDIO controller is idle, and do not exit until
the command is finished. */
diff --git a/drivers/net/hp100.c b/drivers/net/hp100.c
index 49421d1..8b90d64 100644
--- a/drivers/net/hp100.c
+++ b/drivers/net/hp100.c
@@ -2643,7 +2643,7 @@ static int hp100_login_to_vg_hub(struct net_device *dev, u_short force_relogin)
} else {
hp100_andb(~HP100_PROM_MODE, VG_LAN_CFG_2);
/* For ETR parts we need to reset the prom. bit in the training
- * register, otherwise promiscious mode won't be disabled.
+ * register, otherwise promiscuous mode won't be disabled.
*/
if (lp->chip == HP100_CHIPID_LASSEN) {
hp100_andw(~HP100_MACRQ_PROMSC, TRAIN_REQUEST);
diff --git a/drivers/net/hp100.h b/drivers/net/hp100.h
index e6ca128..e74e45d 100644
--- a/drivers/net/hp100.h
+++ b/drivers/net/hp100.h
@@ -476,7 +476,7 @@
#define HP100_MACRQ_REPEATER 0x0001 /* 1: MAC tells HUB it wants to be
* a cascaded repeater
* 0: ... wants to be a DTE */
-#define HP100_MACRQ_PROMSC 0x0006 /* 2 bits: Promiscious mode
+#define HP100_MACRQ_PROMSC 0x0006 /* 2 bits: Promiscuous mode
* 00: Rcv only unicast packets
* specifically addr to this
* endnode
@@ -488,7 +488,7 @@
#define HP100_CARD_MACVER 0xe000 /* R: 3 bit Cards 100VG MAC version */
#define HP100_MALLOW_REPEATER 0x0001 /* If reset, requested access as an
* end node is allowed */
-#define HP100_MALLOW_PROMSC 0x0004 /* 2 bits: Promiscious mode
+#define HP100_MALLOW_PROMSC 0x0004 /* 2 bits: Promiscuous mode
* 00: Rcv only unicast packets
* specifically addr to this
* endnode
diff --git a/drivers/net/ibm_emac/ibm_emac.h b/drivers/net/ibm_emac/ibm_emac.h
index 97ed22b..655be50 100644
--- a/drivers/net/ibm_emac/ibm_emac.h
+++ b/drivers/net/ibm_emac/ibm_emac.h
@@ -1,7 +1,7 @@
/*
* drivers/net/ibm_emac/ibm_emac.h
*
- * Register definitions for PowerPC 4xx on-chip ethernet contoller
+ * Register definitions for PowerPC 4xx on-chip ethernet controller
*
* Copyright (c) 2004, 2005 Zultys Technologies.
* Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
diff --git a/drivers/net/ibm_newemac/emac.h b/drivers/net/ibm_newemac/emac.h
index 91cb096..49a540a 100644
--- a/drivers/net/ibm_newemac/emac.h
+++ b/drivers/net/ibm_newemac/emac.h
@@ -1,7 +1,7 @@
/*
* drivers/net/ibm_newemac/emac.h
*
- * Register definitions for PowerPC 4xx on-chip ethernet contoller
+ * Register definitions for PowerPC 4xx on-chip ethernet controller
*
* Copyright 2007 Benjamin Herrenschmidt, IBM Corp.
* <benh@kernel.crashing.org>
diff --git a/drivers/net/ibmlana.c b/drivers/net/ibmlana.c
index 91d83ac..5a9b6fa 100644
--- a/drivers/net/ibmlana.c
+++ b/drivers/net/ibmlana.c
@@ -481,7 +481,7 @@ static void InitBoard(struct net_device *dev)
if ((dev->flags & IFF_ALLMULTI) || (mcptr != NULL))
rcrval |= RCREG_AMC;
- /* promiscous mode ? */
+ /* promiscuous mode ? */
if (dev->flags & IFF_PROMISC)
rcrval |= RCREG_PRO;
diff --git a/drivers/net/ibmlana.h b/drivers/net/ibmlana.h
index aa3ddbd..654af95 100644
--- a/drivers/net/ibmlana.h
+++ b/drivers/net/ibmlana.h
@@ -90,7 +90,7 @@ typedef struct {
#define RCREG_ERR 0x8000 /* accept damaged and collided pkts */
#define RCREG_RNT 0x4000 /* accept packets that are < 64 */
#define RCREG_BRD 0x2000 /* accept broadcasts */
-#define RCREG_PRO 0x1000 /* promiscous mode */
+#define RCREG_PRO 0x1000 /* promiscuous mode */
#define RCREG_AMC 0x0800 /* accept all multicasts */
#define RCREG_LB_NONE 0x0000 /* no loopback */
#define RCREG_LB_MAC 0x0200 /* MAC loopback */
diff --git a/drivers/net/ipg.c b/drivers/net/ipg.c
index dbd23bb..27d12eb 100644
--- a/drivers/net/ipg.c
+++ b/drivers/net/ipg.c
@@ -209,7 +209,7 @@ static int mdio_read(struct net_device * dev, int phy_id, int phy_reg)
{
void __iomem *ioaddr = ipg_ioaddr(dev);
/*
- * The GMII mangement frame structure for a read is as follows:
+ * The GMII management frame structure for a read is as follows:
*
* |Preamble|st|op|phyad|regad|ta| data |idle|
* |< 32 1s>|01|10|AAAAA|RRRRR|z0|DDDDDDDDDDDDDDDD|z |
@@ -300,7 +300,7 @@ static void mdio_write(struct net_device *dev, int phy_id, int phy_reg, int val)
{
void __iomem *ioaddr = ipg_ioaddr(dev);
/*
- * The GMII mangement frame structure for a read is as follows:
+ * The GMII management frame structure for a read is as follows:
*
* |Preamble|st|op|phyad|regad|ta| data |idle|
* |< 32 1s>|01|10|AAAAA|RRRRR|z0|DDDDDDDDDDDDDDDD|z |
diff --git a/drivers/net/irda/ali-ircc.c b/drivers/net/irda/ali-ircc.c
index 9f58452..94140f7 100644
--- a/drivers/net/irda/ali-ircc.c
+++ b/drivers/net/irda/ali-ircc.c
@@ -977,7 +977,7 @@ static void ali_ircc_change_speed(struct ali_ircc_cb *self, __u32 baud)
/* Install FIR xmit handler*/
dev->hard_start_xmit = ali_ircc_fir_hard_xmit;
- /* Enable Interuupt */
+ /* Enable Interrupt */
self->ier = IER_EOM; // benjamin 2000/11/20 07:24PM
/* Be ready for incomming frames */
@@ -1096,7 +1096,7 @@ static void ali_ircc_sir_change_speed(struct ali_ircc_cb *priv, __u32 speed)
outb(lcr, iobase+UART_LCR); /* Set 8N1 */
outb(fcr, iobase+UART_FCR); /* Enable FIFO's */
- /* without this, the conection will be broken after come back from FIR speed,
+ /* without this, the connection will be broken after come back from FIR speed,
but with this, the SIR connection is harder to established */
outb((UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2), iobase+UART_MCR);
@@ -1359,7 +1359,7 @@ static int ali_ircc_net_open(struct net_device *dev)
return -EAGAIN;
}
- /* Turn on interrups */
+ /* Turn on interrupts */
outb(UART_IER_RDI , iobase+UART_IER);
/* Ready to play! */
diff --git a/drivers/net/irda/ali-ircc.h b/drivers/net/irda/ali-ircc.h
index e489c66..0787657 100644
--- a/drivers/net/irda/ali-ircc.h
+++ b/drivers/net/irda/ali-ircc.h
@@ -173,13 +173,13 @@ struct st_fifo {
struct frame_cb {
void *start; /* Start of frame in DMA mem */
- int len; /* Lenght of frame in DMA mem */
+ int len; /* Length of frame in DMA mem */
};
struct tx_fifo {
struct frame_cb queue[MAX_TX_WINDOW]; /* Info about frames in queue */
int ptr; /* Currently being sent */
- int len; /* Lenght of queue */
+ int len; /* Length of queue */
int free; /* Next free slot */
void *tail; /* Next free start in DMA mem */
};
diff --git a/drivers/net/irda/donauboe.h b/drivers/net/irda/donauboe.h
index 1e67720..9db3cce 100644
--- a/drivers/net/irda/donauboe.h
+++ b/drivers/net/irda/donauboe.h
@@ -30,7 +30,7 @@
* or the type-DO IR port.
*
* IrDA chip set list from Toshiba Computer Engineering Corp.
- * model method maker controler Version
+ * model method maker controller Version
* Portege 320CT FIR,SIR Toshiba Oboe(Triangle)
* Portege 3010CT FIR,SIR Toshiba Oboe(Sydney)
* Portege 3015CT FIR,SIR Toshiba Oboe(Sydney)
diff --git a/drivers/net/irda/irport.c b/drivers/net/irda/irport.c
index c79caa5..2b2a955 100644
--- a/drivers/net/irda/irport.c
+++ b/drivers/net/irda/irport.c
@@ -276,7 +276,7 @@ static void irport_start(struct irport_cb *self)
outb(UART_LCR_WLEN8, iobase+UART_LCR); /* Reset DLAB */
outb((UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2), iobase+UART_MCR);
- /* Turn on interrups */
+ /* Turn on interrupts */
outb(UART_IER_RLSI | UART_IER_RDI |UART_IER_THRI, iobase+UART_IER);
}
@@ -352,7 +352,7 @@ static void irport_change_speed(void *priv, __u32 speed)
outb(lcr, iobase+UART_LCR); /* Set 8N1 */
outb(fcr, iobase+UART_FCR); /* Enable FIFO's */
- /* Turn on interrups */
+ /* Turn on interrupts */
/* This will generate a fatal interrupt storm.
* People calling us will do that properly - Jean II */
//outb(/*UART_IER_RLSI|*/UART_IER_RDI/*|UART_IER_THRI*/, iobase+UART_IER);
diff --git a/drivers/net/irda/nsc-ircc.h b/drivers/net/irda/nsc-ircc.h
index bbdc97f..29398a4 100644
--- a/drivers/net/irda/nsc-ircc.h
+++ b/drivers/net/irda/nsc-ircc.h
@@ -231,13 +231,13 @@ struct st_fifo {
struct frame_cb {
void *start; /* Start of frame in DMA mem */
- int len; /* Lenght of frame in DMA mem */
+ int len; /* Length of frame in DMA mem */
};
struct tx_fifo {
struct frame_cb queue[MAX_TX_WINDOW]; /* Info about frames in queue */
int ptr; /* Currently being sent */
- int len; /* Lenght of queue */
+ int len; /* Length of queue */
int free; /* Next free slot */
void *tail; /* Next free start in DMA mem */
};
diff --git a/drivers/net/irda/smsc-ircc2.c b/drivers/net/irda/smsc-ircc2.c
index 7e7b582..7fd9a48 100644
--- a/drivers/net/irda/smsc-ircc2.c
+++ b/drivers/net/irda/smsc-ircc2.c
@@ -1165,7 +1165,7 @@ void smsc_ircc_set_sir_speed(struct smsc_ircc_cb *self, __u32 speed)
outb(lcr, iobase + UART_LCR); /* Set 8N1 */
outb(fcr, iobase + UART_FCR); /* Enable FIFO's */
- /* Turn on interrups */
+ /* Turn on interrupts */
outb(UART_IER_RLSI | UART_IER_RDI | UART_IER_THRI, iobase + UART_IER);
IRDA_DEBUG(2, "%s() speed changed to: %d\n", __FUNCTION__, speed);
@@ -1930,7 +1930,7 @@ void smsc_ircc_sir_start(struct smsc_ircc_cb *self)
outb(UART_LCR_WLEN8, sir_base + UART_LCR); /* Reset DLAB */
outb((UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2), sir_base + UART_MCR);
- /* Turn on interrups */
+ /* Turn on interrupts */
outb(UART_IER_RLSI | UART_IER_RDI |UART_IER_THRI, sir_base + UART_IER);
IRDA_DEBUG(3, "%s() - exit\n", __FUNCTION__);
diff --git a/drivers/net/irda/via-ircc.h b/drivers/net/irda/via-ircc.h
index 204b1b3..9d012f0 100644
--- a/drivers/net/irda/via-ircc.h
+++ b/drivers/net/irda/via-ircc.h
@@ -54,13 +54,13 @@ struct st_fifo {
struct frame_cb {
void *start; /* Start of frame in DMA mem */
- int len; /* Lenght of frame in DMA mem */
+ int len; /* Length of frame in DMA mem */
};
struct tx_fifo {
struct frame_cb queue[MAX_TX_WINDOW + 2]; /* Info about frames in queue */
int ptr; /* Currently being sent */
- int len; /* Lenght of queue */
+ int len; /* Length of queue */
int free; /* Next free slot */
void *tail; /* Next free start in DMA mem */
};
diff --git a/drivers/net/ixgbe/ixgbe_common.c b/drivers/net/ixgbe/ixgbe_common.c
index 512e3b2..4b6359e 100644
--- a/drivers/net/ixgbe/ixgbe_common.c
+++ b/drivers/net/ixgbe/ixgbe_common.c
@@ -716,7 +716,7 @@ static s32 ixgbe_init_rx_addrs(struct ixgbe_hw *hw)
* bit-vector to set in the multicast table. The hardware uses 12 bits, from
* incoming rx multicast addresses, to determine the bit-vector to check in
* the MTA. Which of the 4 combination, of 12-bits, the hardware uses is set
- * by the MO field of the MCSTCTRL. The MO field is set during initalization
+ * by the MO field of the MCSTCTRL. The MO field is set during initialization
* to mc_filter_type.
**/
static s32 ixgbe_mta_vector(struct ixgbe_hw *hw, u8 *mc_addr)
@@ -1066,7 +1066,7 @@ s32 ixgbe_disable_pcie_master(struct ixgbe_hw *hw)
/**
- * ixgbe_acquire_swfw_sync - Aquire SWFW semaphore
+ * ixgbe_acquire_swfw_sync - Acquire SWFW semaphore
* @hw: pointer to hardware structure
* @mask: Mask to specify wich semaphore to acquire
*
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index 00bc525..25a9cc2 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -592,7 +592,7 @@ quit_polling:
* ixgbe_setup_msix - Initialize MSI-X interrupts
*
* ixgbe_setup_msix allocates MSI-X vectors and requests
- * interrutps from the kernel.
+ * interrupts from the kernel.
**/
static int ixgbe_setup_msix(struct ixgbe_adapter *adapter)
{
diff --git a/drivers/net/lasi_82596.c b/drivers/net/lasi_82596.c
index efbae4b..1ba38c2 100644
--- a/drivers/net/lasi_82596.c
+++ b/drivers/net/lasi_82596.c
@@ -47,7 +47,7 @@
TBD:
* look at deferring rx frames rather than discarding (as per tulip)
* handle tx ring full as per tulip
- * performace test to tune rx_copybreak
+ * performance test to tune rx_copybreak
Most of my modifications relate to the braindead big-endian
implementation by Intel. When the i596 is operating in
diff --git a/drivers/net/lib82596.c b/drivers/net/lib82596.c
index b59f442..c335d31 100644
--- a/drivers/net/lib82596.c
+++ b/drivers/net/lib82596.c
@@ -47,7 +47,7 @@
TBD:
* look at deferring rx frames rather than discarding (as per tulip)
* handle tx ring full as per tulip
- * performace test to tune rx_copybreak
+ * performance test to tune rx_copybreak
Most of my modifications relate to the braindead big-endian
implementation by Intel. When the i596 is operating in
diff --git a/drivers/net/macb.c b/drivers/net/macb.c
index 047ea7b..1367178 100644
--- a/drivers/net/macb.c
+++ b/drivers/net/macb.c
@@ -239,7 +239,7 @@ static int macb_mii_init(struct macb *bp)
struct eth_platform_data *pdata;
int err = -ENXIO, i;
- /* Enable managment port */
+ /* Enable management port */
macb_writel(bp, NCR, MACB_BIT(MPE));
bp->mii_bus.name = "MACB_mii_bus",
diff --git a/drivers/net/meth.h b/drivers/net/meth.h
index a78dc1c..ecd0e97 100644
--- a/drivers/net/meth.h
+++ b/drivers/net/meth.h
@@ -127,7 +127,7 @@ typedef struct rx_packet {
#define METH_ACCEPT_MY 0 /* 00: Accept PHY address only */
#define METH_ACCEPT_MCAST 0x20 /* 01: Accept physical, broadcast, and multicast filter matches only */
#define METH_ACCEPT_AMCAST 0x40 /* 10: Accept physical, broadcast, and all multicast packets */
-#define METH_PROMISC 0x60 /* 11: Promiscious mode */
+#define METH_PROMISC 0x60 /* 11: Promiscuous mode */
#define METH_PHY_LINK_FAIL BIT(7) /* 0: Link failure detection disabled, 1: Hardware scans for link failure in PHY */
diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c
index 651c269..c263c91 100644
--- a/drivers/net/mv643xx_eth.c
+++ b/drivers/net/mv643xx_eth.c
@@ -535,7 +535,7 @@ struct mv643xx_private {
int rx_resource_err; /* Rx ring resource error flag */
- /* Tx/Rx rings managment indexes fields. For driver use */
+ /* Tx/Rx rings management indexes fields. For driver use */
/* Next available and first returning Rx resource */
int rx_curr_desc_q, rx_used_desc_q;
@@ -757,7 +757,7 @@ static void mv643xx_eth_update_mac_address(struct net_device *dev)
/*
* mv643xx_eth_set_rx_mode
*
- * Change from promiscuos to regular rx mode
+ * Change from promiscuous to regular rx mode
*
* Input : pointer to ethernet interface network device structure
* Output : N/A
diff --git a/drivers/net/netxen/netxen_nic_hw.h b/drivers/net/netxen/netxen_nic_hw.h
index 245bf13..236160a 100644
--- a/drivers/net/netxen/netxen_nic_hw.h
+++ b/drivers/net/netxen/netxen_nic_hw.h
@@ -429,7 +429,7 @@ typedef enum {
#define netxen_get_niu_enable_ge(config_word) \
_netxen_crb_get_bit(config_word, 1)
-/* Promiscous mode options (GbE mode only) */
+/* Promiscuous mode options (GbE mode only) */
typedef enum {
NETXEN_NIU_PROMISC_MODE = 0,
NETXEN_NIU_NON_PROMISC_MODE
diff --git a/drivers/net/ppp_generic.c b/drivers/net/ppp_generic.c
index 4f69037..9e1890f 100644
--- a/drivers/net/ppp_generic.c
+++ b/drivers/net/ppp_generic.c
@@ -2368,7 +2368,7 @@ find_compressor(int type)
}
/*
- * Miscelleneous stuff.
+ * Miscellaneous stuff.
*/
static void
diff --git a/drivers/net/ps3_gelic_net.c b/drivers/net/ps3_gelic_net.c
index 0a42bf5..5efc5b4 100644
--- a/drivers/net/ps3_gelic_net.c
+++ b/drivers/net/ps3_gelic_net.c
@@ -1271,7 +1271,7 @@ static struct ethtool_ops gelic_net_ethtool_ops = {
/**
* gelic_net_tx_timeout_task - task scheduled by the watchdog timeout
* function (to be called not under interrupt status)
- * @work: work is context of tx timout task
+ * @work: work is context of tx timeout task
*
* called as task when tx hangs, resets interface (if interface is up)
*/
diff --git a/drivers/net/qla3xxx.c b/drivers/net/qla3xxx.c
index a579111..da85b7f 100644
--- a/drivers/net/qla3xxx.c
+++ b/drivers/net/qla3xxx.c
@@ -3691,7 +3691,7 @@ static int ql_adapter_up(struct ql3_adapter *qdev)
ql_sem_unlock(qdev, QL_DRVR_SEM_MASK);
} else {
printk(KERN_ERR PFX
- "%s: Could not aquire driver lock.\n",
+ "%s: Could not acquire driver lock.\n",
ndev->name);
goto err_lock;
}
diff --git a/drivers/net/s2io.h b/drivers/net/s2io.h
index cc1797a..63d45d4 100644
--- a/drivers/net/s2io.h
+++ b/drivers/net/s2io.h
@@ -740,7 +740,7 @@ struct mac_info {
u16 mc_pause_threshold_q0q3;
u16 mc_pause_threshold_q4q7;
- void *stats_mem; /* orignal pointer to allocated mem */
+ void *stats_mem; /* original pointer to allocated mem */
dma_addr_t stats_mem_phy; /* Physical address of the stat block */
u32 stats_mem_sz;
struct stat_block *stats_info; /* Logical address of the stat block */
diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c
index 7200883..ff559e4 100644
--- a/drivers/net/sis190.c
+++ b/drivers/net/sis190.c
@@ -102,7 +102,7 @@ enum sis190_registers {
IntrStatus = 0x20,
IntrMask = 0x24,
IntrControl = 0x28,
- IntrTimer = 0x2c, // unused (Interupt Timer)
+ IntrTimer = 0x2c, // unused (Interrupt Timer)
PMControl = 0x30, // unused (Power Mgmt Control/Status)
rsv2 = 0x34, // reserved
ROMControl = 0x38,
diff --git a/drivers/net/sk98lin/skgepnmi.c b/drivers/net/sk98lin/skgepnmi.c
index b36dd9a..c761ff7 100644
--- a/drivers/net/sk98lin/skgepnmi.c
+++ b/drivers/net/sk98lin/skgepnmi.c
@@ -356,7 +356,7 @@ int Level) /* Initialization level */
unsigned int PortMax; /* Number of ports */
unsigned int PortIndex; /* Current port index in loop */
SK_U16 Val16; /* Multiple purpose 16 bit variable */
- SK_U8 Val8; /* Mulitple purpose 8 bit variable */
+ SK_U8 Val8; /* Multiple purpose 8 bit variable */
SK_EVPARA EventParam; /* Event struct for timer event */
SK_PNMI_VCT *pVctBackupData;
diff --git a/drivers/net/sk98lin/skxmac2.c b/drivers/net/sk98lin/skxmac2.c
index b4e7502..3994289 100644
--- a/drivers/net/sk98lin/skxmac2.c
+++ b/drivers/net/sk98lin/skxmac2.c
@@ -3891,7 +3891,7 @@ int SkXmOverflowStatus(
SK_AC *pAC, /* adapter context */
SK_IOC IoC, /* IO context */
unsigned int Port, /* Port Index (MAC_1 + n) */
-SK_U16 IStatus, /* Interupt Status from MAC */
+SK_U16 IStatus, /* Interrupt Status from MAC */
SK_U64 SK_FAR *pStatus) /* ptr for return overflow status value */
{
SK_U64 Status; /* Overflow status */
@@ -4036,7 +4036,7 @@ int SkGmOverflowStatus(
SK_AC *pAC, /* adapter context */
SK_IOC IoC, /* IO context */
unsigned int Port, /* Port Index (MAC_1 + n) */
-SK_U16 IStatus, /* Interupt Status from MAC */
+SK_U16 IStatus, /* Interrupt Status from MAC */
SK_U64 SK_FAR *pStatus) /* ptr for return overflow status value */
{
SK_U64 Status; /* Overflow status */
diff --git a/drivers/net/skfp/ess.c b/drivers/net/skfp/ess.c
index 62b0132..889f987 100644
--- a/drivers/net/skfp/ess.c
+++ b/drivers/net/skfp/ess.c
@@ -598,7 +598,7 @@ static void ess_send_alc_req(struct s_smc *smc)
req->cmd.sba_cmd = REQUEST_ALLOCATION ;
/*
- * set the parameter type and parameter lenght of all used
+ * set the parameter type and parameter length of all used
* parameters
*/
diff --git a/drivers/net/skfp/fplustm.c b/drivers/net/skfp/fplustm.c
index a45205d..b27a895 100644
--- a/drivers/net/skfp/fplustm.c
+++ b/drivers/net/skfp/fplustm.c
@@ -398,7 +398,7 @@ static void copy_tx_mac(struct s_smc *smc, u_long td, struct fddi_mac *mac,
/* u_long td; transmit descriptor */
/* struct fddi_mac *mac; mac frame pointer */
/* unsigned off; start address within buffer memory */
-/* int len ; lenght of the frame including the FC */
+/* int len ; length of the frame including the FC */
{
int i ;
u_int *p ;
@@ -1262,8 +1262,8 @@ Function DOWNCALL/INTERN (SMT, fplustm.c)
Para mode = 1 RX_ENABLE_ALLMULTI enable all multicasts
2 RX_DISABLE_ALLMULTI disable "enable all multicasts"
- 3 RX_ENABLE_PROMISC enable promiscous
- 4 RX_DISABLE_PROMISC disable promiscous
+ 3 RX_ENABLE_PROMISC enable promiscuous
+ 4 RX_DISABLE_PROMISC disable promiscuous
5 RX_ENABLE_NSA enable reception of NSA frames
6 RX_DISABLE_NSA disable reception of NSA frames
diff --git a/drivers/net/skfp/h/fplustm.h b/drivers/net/skfp/h/fplustm.h
index 98bbf65..586f055 100644
--- a/drivers/net/skfp/h/fplustm.h
+++ b/drivers/net/skfp/h/fplustm.h
@@ -237,8 +237,8 @@ struct s_smt_fp {
*/
#define RX_ENABLE_ALLMULTI 1 /* enable all multicasts */
#define RX_DISABLE_ALLMULTI 2 /* disable "enable all multicasts" */
-#define RX_ENABLE_PROMISC 3 /* enable promiscous */
-#define RX_DISABLE_PROMISC 4 /* disable promiscous */
+#define RX_ENABLE_PROMISC 3 /* enable promiscuous */
+#define RX_DISABLE_PROMISC 4 /* disable promiscuous */
#define RX_ENABLE_NSA 5 /* enable reception of NSA frames */
#define RX_DISABLE_NSA 6 /* disable reception of NSA frames */
diff --git a/drivers/net/skfp/h/smt.h b/drivers/net/skfp/h/smt.h
index 1ff5899..2976757 100644
--- a/drivers/net/skfp/h/smt.h
+++ b/drivers/net/skfp/h/smt.h
@@ -413,7 +413,7 @@ struct smt_p_reason {
#define SMT_RDF_SUCCESS 0x00000003 /* success (PMF) */
#define SMT_RDF_BADSET 0x00000004 /* bad set count (PMF) */
#define SMT_RDF_ILLEGAL 0x00000005 /* read only (PMF) */
-#define SMT_RDF_NOPARAM 0x6 /* paramter not supported (PMF) */
+#define SMT_RDF_NOPARAM 0x6 /* parameter not supported (PMF) */
#define SMT_RDF_RANGE 0x8 /* out of range */
#define SMT_RDF_AUTHOR 0x9 /* not autohorized */
#define SMT_RDF_LENGTH 0x0a /* length error */
diff --git a/drivers/net/skfp/h/supern_2.h b/drivers/net/skfp/h/supern_2.h
index 5ba0b83..1074f96 100644
--- a/drivers/net/skfp/h/supern_2.h
+++ b/drivers/net/skfp/h/supern_2.h
@@ -386,7 +386,7 @@ struct tx_queue {
#define FM_MDISRCV (4<<8) /* disable receive function */
#define FM_MRES0 (5<<8) /* reserve */
#define FM_MLIMPROM (6<<8) /* limited-promiscuous mode */
-#define FM_MPROMISCOUS (7<<8) /* address detection : promiscous */
+#define FM_MPROMISCOUS (7<<8) /* address detection : promiscuous */
#define FM_SELSA 0x0800 /* select-short-address bit */
diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c
index 76cc1d3..648b904 100644
--- a/drivers/net/smc911x.c
+++ b/drivers/net/smc911x.c
@@ -466,7 +466,7 @@ static inline void smc911x_rcv(struct net_device *dev)
/* Align IP header to 32 bits
* Note that the device is configured to add a 2
* byte padding to the packet start, so we really
- * want to write to the orignal data pointer */
+ * want to write to the original data pointer */
data = skb->data;
skb_reserve(skb, 2);
skb_put(skb,pkt_len-4);
diff --git a/drivers/net/spider_net.c b/drivers/net/spider_net.c
index bccae7e..7a7f5cd 100644
--- a/drivers/net/spider_net.c
+++ b/drivers/net/spider_net.c
@@ -1826,7 +1826,7 @@ spider_net_enable_card(struct spider_net_card *card)
spider_net_write_reg(card, SPIDER_NET_ECMODE, SPIDER_NET_ECMODE_VALUE);
- /* set chain tail adress for RX chains and
+ /* set chain tail address for RX chains and
* enable DMA */
spider_net_enable_rxchtails(card);
spider_net_enable_rxdmac(card);
diff --git a/drivers/net/sunbmac.h b/drivers/net/sunbmac.h
index b563d3c..681442b 100644
--- a/drivers/net/sunbmac.h
+++ b/drivers/net/sunbmac.h
@@ -185,7 +185,7 @@
#define BIGMAC_RXCFG_ENABLE 0x00000001 /* Enable the receiver */
#define BIGMAC_RXCFG_FIFO 0x0000000e /* Default rx fthresh... */
#define BIGMAC_RXCFG_PSTRIP 0x00000020 /* Pad byte strip enable */
-#define BIGMAC_RXCFG_PMISC 0x00000040 /* Enable promiscous mode */
+#define BIGMAC_RXCFG_PMISC 0x00000040 /* Enable promiscuous mode */
#define BIGMAC_RXCFG_DERR 0x00000080 /* Disable error checking */
#define BIGMAC_RXCFG_DCRCS 0x00000100 /* Disable CRC stripping */
#define BIGMAC_RXCFG_ME 0x00000200 /* Receive packets addressed to me */
diff --git a/drivers/net/sungem.c b/drivers/net/sungem.c
index 6887214..097a065 100644
--- a/drivers/net/sungem.c
+++ b/drivers/net/sungem.c
@@ -780,7 +780,7 @@ static int gem_rx(struct gem *gp, int work_to_do)
break;
/* When writing back RX descriptor, GEM writes status
- * then buffer address, possibly in seperate transactions.
+ * then buffer address, possibly in separate transactions.
* If we don't wait for the chip to write both, we could
* post a new buffer to this descriptor then have GEM spam
* on the buffer address. We sync on the RX completion
diff --git a/drivers/net/sunhme.h b/drivers/net/sunhme.h
index 90f446d..68bf4e1 100644
--- a/drivers/net/sunhme.h
+++ b/drivers/net/sunhme.h
@@ -223,7 +223,7 @@
/* BigMac receive config register. */
#define BIGMAC_RXCFG_ENABLE 0x00000001 /* Enable the receiver */
#define BIGMAC_RXCFG_PSTRIP 0x00000020 /* Pad byte strip enable */
-#define BIGMAC_RXCFG_PMISC 0x00000040 /* Enable promiscous mode */
+#define BIGMAC_RXCFG_PMISC 0x00000040 /* Enable promiscuous mode */
#define BIGMAC_RXCFG_DERR 0x00000080 /* Disable error checking */
#define BIGMAC_RXCFG_DCRCS 0x00000100 /* Disable CRC stripping */
#define BIGMAC_RXCFG_REJME 0x00000200 /* Reject packets addressed to me */
diff --git a/drivers/net/tc35815.c b/drivers/net/tc35815.c
index d887c05..0fbf96d 100644
--- a/drivers/net/tc35815.c
+++ b/drivers/net/tc35815.c
@@ -136,7 +136,7 @@ struct tc35815_regs {
#define DMA_RxAlign_2 0x00800000
#define DMA_RxAlign_3 0x00c00000
#define DMA_M66EnStat 0x00080000 /* 1:66MHz Enable State */
-#define DMA_IntMask 0x00040000 /* 1:Interupt mask */
+#define DMA_IntMask 0x00040000 /* 1:Interrupt mask */
#define DMA_SWIntReq 0x00020000 /* 1:Software Interrupt request */
#define DMA_TxWakeUp 0x00010000 /* 1:Transmit Wake Up */
#define DMA_RxBigE 0x00008000 /* 1:Receive Big Endian */
@@ -281,7 +281,7 @@ struct tc35815_regs {
#define Int_IntMacTx 0x00000001 /* 1:Tx controller & Clear */
/* MD_CA bit asign --------------------------------------------------------- */
-#define MD_CA_PreSup 0x00001000 /* 1:Preamble Supress */
+#define MD_CA_PreSup 0x00001000 /* 1:Preamble Suppress */
#define MD_CA_Busy 0x00000800 /* 1:Busy (Start Operation) */
#define MD_CA_Wr 0x00000400 /* 1:Write 0:Read */
diff --git a/drivers/net/tehuti.c b/drivers/net/tehuti.c
index 21230c9..3ed1973 100644
--- a/drivers/net/tehuti.c
+++ b/drivers/net/tehuti.c
@@ -276,7 +276,7 @@ static irqreturn_t bdx_isr_napi(int irq, void *dev)
* currently intrs are disabled (since we read ISR),
* and we have failed to register next poll.
* so we read the regs to trigger chip
- * and allow further interupts. */
+ * and allow further interrupts. */
READ_REG(priv, regTXF_WPTR_0);
READ_REG(priv, regRXD_WPTR_0);
}
diff --git a/drivers/net/tehuti.h b/drivers/net/tehuti.h
index efd170f..992efa6 100644
--- a/drivers/net/tehuti.h
+++ b/drivers/net/tehuti.h
@@ -510,7 +510,7 @@ struct txd_desc {
#define GMAC_RX_FILTER_ACRC 0x0010 /* accept crc error */
#define GMAC_RX_FILTER_AM 0x0008 /* accept multicast */
#define GMAC_RX_FILTER_AB 0x0004 /* accept broadcast */
-#define GMAC_RX_FILTER_PRM 0x0001 /* [0:1] promiscous mode */
+#define GMAC_RX_FILTER_PRM 0x0001 /* [0:1] promiscuous mode */
#define MAX_FRAME_AB_VAL 0x3fff /* 13:0 */
diff --git a/drivers/net/tokenring/3c359.c b/drivers/net/tokenring/3c359.c
index 5d31519..9d7a0c9 100644
--- a/drivers/net/tokenring/3c359.c
+++ b/drivers/net/tokenring/3c359.c
@@ -75,7 +75,7 @@ static char version[] __devinitdata =
MODULE_AUTHOR("Mike Phillips <mikep@linuxtr.net>") ;
MODULE_DESCRIPTION("3Com 3C359 Velocity XL Token Ring Adapter Driver \n") ;
-/* Module paramters */
+/* Module parameters */
/* Ring Speed 0,4,16
* 0 = Autosense
diff --git a/drivers/net/tokenring/lanstreamer.c b/drivers/net/tokenring/lanstreamer.c
index 47d84cd..21c4f3c 100644
--- a/drivers/net/tokenring/lanstreamer.c
+++ b/drivers/net/tokenring/lanstreamer.c
@@ -170,7 +170,7 @@ static char *open_min_error[] = {
"Monitor Contention failer for RPL", "FDX Protocol Error"
};
-/* Module paramters */
+/* Module parameters */
/* Ring Speed 0,4,16
* 0 = Autosense
diff --git a/drivers/net/tokenring/olympic.c b/drivers/net/tokenring/olympic.c
index 74c1f0f..b1178f1 100644
--- a/drivers/net/tokenring/olympic.c
+++ b/drivers/net/tokenring/olympic.c
@@ -132,7 +132,7 @@ static char *open_min_error[] = {"No error", "Function Failure", "Signal Lost",
"Reserved", "Reserved", "No Monitor Detected for RPL",
"Monitor Contention failer for RPL", "FDX Protocol Error"};
-/* Module paramters */
+/* Module parameters */
MODULE_AUTHOR("Mike Phillips <mikep@linuxtr.net>") ;
MODULE_DESCRIPTION("Olympic PCI/Cardbus Chipset Driver") ;
diff --git a/drivers/net/tokenring/smctr.c b/drivers/net/tokenring/smctr.c
index 93da3a3..4238a61 100644
--- a/drivers/net/tokenring/smctr.c
+++ b/drivers/net/tokenring/smctr.c
@@ -2426,7 +2426,7 @@ static irqreturn_t smctr_interrupt(int irq, void *dev_id)
break ;
/* Type 0x0E - TRC Initialization Sequence Interrupt
- * Subtype -- 00-FF Initializatin sequence complete
+ * Subtype -- 00-FF Initialization sequence complete
*/
case ISB_IMC_TRC_INTRNL_TST_STATUS:
tp->status = INITIALIZED;
@@ -3055,8 +3055,8 @@ static int smctr_load_node_addr(struct net_device *dev)
* disabled.!?
*
* NOTE 2: If the monitor_state is MS_BEACON_TEST_STATE and the receive_mask
- * has any multi-cast or promiscous bits set, the receive_mask needs to
- * be changed to clear the multi-cast or promiscous mode bits, the lobe_test
+ * has any multi-cast or promiscuous bits set, the receive_mask needs to
+ * be changed to clear the multi-cast or promiscuous mode bits, the lobe_test
* run, and then the receive mask set back to its original value if the test
* is successful.
*/
diff --git a/drivers/net/tokenring/tms380tr.c b/drivers/net/tokenring/tms380tr.c
index d5fa36d..b15435d 100644
--- a/drivers/net/tokenring/tms380tr.c
+++ b/drivers/net/tokenring/tms380tr.c
@@ -48,7 +48,7 @@
* 25-Sep-99 AF Uped TPL_NUM from 3 to 9
* Removed extraneous 'No free TPL'
* 22-Dec-99 AF Added Madge PCI Mk2 support and generalized
- * parts of the initilization procedure.
+ * parts of the initialization procedure.
* 30-Dec-99 AF Turned tms380tr into a library ala 8390.
* Madge support is provided in the abyss module
* Generic PCI support is in the tmspci module.
diff --git a/drivers/net/tokenring/tms380tr.h b/drivers/net/tokenring/tms380tr.h
index 7daf74e..1cbb8b8 100644
--- a/drivers/net/tokenring/tms380tr.h
+++ b/drivers/net/tokenring/tms380tr.h
@@ -441,7 +441,7 @@ typedef struct {
#define PASS_FIRST_BUF_ONLY 0x0100 /* Passes only first internal buffer
* of each received frame; FrameSize
* of RPLs must contain internal
- * BUFFER_SIZE bits for promiscous mode.
+ * BUFFER_SIZE bits for promiscuous mode.
*/
#define ENABLE_FULL_DUPLEX_SELECTION 0x2000
/* Enable the use of full-duplex
diff --git a/drivers/net/tulip/xircom_cb.c b/drivers/net/tulip/xircom_cb.c
index 70befe3..5dad012 100644
--- a/drivers/net/tulip/xircom_cb.c
+++ b/drivers/net/tulip/xircom_cb.c
@@ -646,7 +646,7 @@ static void setup_descriptors(struct xircom_private *card)
}
wmb();
- /* wite the transmit descriptor ring to the card */
+ /* write the transmit descriptor ring to the card */
address = (unsigned long) card->tx_dma_handle;
val =cpu_to_le32(address);
outl(val, card->io_port + CSR4); /* xmit descr list address */
diff --git a/drivers/net/tun.c b/drivers/net/tun.c
index 1f76446..fc9eada 100644
--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -142,7 +142,7 @@ add_multi(u32* filter, const u8* addr)
filter[bit_nr >> 5] |= 1 << (bit_nr & 31);
}
-/** Remove the specified Ethernet addres from this multicast filter. */
+/** Remove the specified Ethernet address from this multicast filter. */
static void
del_multi(u32* filter, const u8* addr)
{
@@ -399,7 +399,7 @@ static ssize_t tun_chr_aio_read(struct kiocb *iocb, const struct iovec *iv,
* - the packet is addressed to us.
* - the packet is broadcast.
* - the packet is multicast and
- * - we are multicast promiscous.
+ * - we are multicast promiscuous.
* - we belong to the multicast group.
*/
skb_copy_from_linear_data(skb, addr, min_t(size_t, sizeof addr,
diff --git a/drivers/net/ucc_geth_ethtool.c b/drivers/net/ucc_geth_ethtool.c
index 9a9622c..f8d319b 100644
--- a/drivers/net/ucc_geth_ethtool.c
+++ b/drivers/net/ucc_geth_ethtool.c
@@ -7,7 +7,7 @@
*
* Limitation:
* Can only get/set setttings of the first queue.
- * Need to re-open the interface manually after changing some paramters.
+ * Need to re-open the interface manually after changing some parameters.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
diff --git a/drivers/net/ucc_geth_mii.c b/drivers/net/ucc_geth_mii.c
index df884f0..7c0d4a8 100644
--- a/drivers/net/ucc_geth_mii.c
+++ b/drivers/net/ucc_geth_mii.c
@@ -63,11 +63,11 @@ int uec_mdio_write(struct mii_bus *bus, int mii_id, int regnum, u16 value)
{
struct ucc_mii_mng __iomem *regs = (void __iomem *)bus->priv;
- /* Setting up the MII Mangement Address Register */
+ /* Setting up the MII Management Address Register */
out_be32(®s->miimadd,
(mii_id << MIIMADD_PHY_ADDRESS_SHIFT) | regnum);
- /* Setting up the MII Mangement Control Register with the value */
+ /* Setting up the MII Management Control Register with the value */
out_be32(®s->miimcon, value);
/* Wait till MII management write is complete */
@@ -85,7 +85,7 @@ int uec_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
struct ucc_mii_mng __iomem *regs = (void __iomem *)bus->priv;
u16 value;
- /* Setting up the MII Mangement Address Register */
+ /* Setting up the MII Management Address Register */
out_be32(®s->miimadd,
(mii_id << MIIMADD_PHY_ADDRESS_SHIFT) | regnum);
diff --git a/drivers/net/wan/cycx_drv.c b/drivers/net/wan/cycx_drv.c
index d347d59..d14e667 100644
--- a/drivers/net/wan/cycx_drv.c
+++ b/drivers/net/wan/cycx_drv.c
@@ -322,7 +322,7 @@ static int cycx_data_boot(void __iomem *addr, u8 *code, u32 len)
void __iomem *pt_boot_cmd = addr + CMD_OFFSET;
u32 i;
- /* boot buffer lenght */
+ /* boot buffer length */
writew(CFM_LOAD_BUFSZ, pt_boot_cmd + sizeof(u16));
writew(GEN_DEFPAR, pt_boot_cmd);
@@ -353,7 +353,7 @@ static int cycx_code_boot(void __iomem *addr, u8 *code, u32 len)
void __iomem *pt_boot_cmd = addr + CMD_OFFSET;
u32 i;
- /* boot buffer lenght */
+ /* boot buffer length */
writew(CFM_LOAD_BUFSZ, pt_boot_cmd + sizeof(u16));
writew(GEN_DEFPAR, pt_boot_cmd);
diff --git a/drivers/net/wan/sbni.c b/drivers/net/wan/sbni.c
index 2e8b5c2..74f87df 100644
--- a/drivers/net/wan/sbni.c
+++ b/drivers/net/wan/sbni.c
@@ -1472,7 +1472,7 @@ sbni_get_stats( struct net_device *dev )
static void
set_multicast_list( struct net_device *dev )
{
- return; /* sbni always operate in promiscuos mode */
+ return; /* sbni always operate in promiscuous mode */
}
diff --git a/drivers/net/wireless/atmel.c b/drivers/net/wireless/atmel.c
index 059ce3f..60dfdd9 100644
--- a/drivers/net/wireless/atmel.c
+++ b/drivers/net/wireless/atmel.c
@@ -3278,7 +3278,7 @@ static void atmel_smooth_qual(struct atmel_private *priv)
priv->wstats.qual.updated &= ~IW_QUAL_QUAL_INVALID;
}
-/* deals with incoming managment frames. */
+/* deals with incoming management frames. */
static void atmel_management_frame(struct atmel_private *priv,
struct ieee80211_hdr_4addr *header,
u16 frame_len, u8 rssi)
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_debugfs.h b/drivers/net/wireless/bcm43xx/bcm43xx_debugfs.h
index a40d1af..edf7d8f 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx_debugfs.h
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_debugfs.h
@@ -28,7 +28,7 @@ struct bcm43xx_dfsentry {
struct bcm43xx_xmitstatus *xmitstatus_buffer;
int xmitstatus_ptr;
int xmitstatus_cnt;
- /* We need a seperate buffer while printing to avoid
+ /* We need a separate buffer while printing to avoid
* concurrency issues. (New xmitstatus can arrive
* while we are printing).
*/
diff --git a/drivers/net/wireless/ipw2200.c b/drivers/net/wireless/ipw2200.c
index 54f44e5..e24382f 100644
--- a/drivers/net/wireless/ipw2200.c
+++ b/drivers/net/wireless/ipw2200.c
@@ -1144,7 +1144,7 @@ static void ipw_led_shutdown(struct ipw_priv *priv)
/*
* The following adds a new attribute to the sysfs representation
* of this device driver (i.e. a new file in /sys/bus/pci/drivers/ipw/)
- * used for controling the debug level.
+ * used for controlling the debug level.
*
* See the level definitions in ipw for details.
*/
diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c
index 891f90d..e242647 100644
--- a/drivers/net/wireless/iwlwifi/iwl-4965.c
+++ b/drivers/net/wireless/iwlwifi/iwl-4965.c
@@ -4051,7 +4051,7 @@ static int iwl4965_tx_status_reply_compressed_ba(struct iwl_priv *priv,
agg->wait_for_ba = 0;
IWL_DEBUG_TX_REPLY("BA %d %d\n", agg->start_idx, ba_resp->ba_seq_ctl);
sh = agg->start_idx - SEQ_TO_INDEX(ba_seq_ctl>>4);
- if (sh < 0) /* tbw something is wrong with indeces */
+ if (sh < 0) /* tbw something is wrong with indices */
sh += 0x100;
/* don't use 64 bits for now */
diff --git a/drivers/net/wireless/libertas/cmd.c b/drivers/net/wireless/libertas/cmd.c
index be5cfd8..31ee4f6 100644
--- a/drivers/net/wireless/libertas/cmd.c
+++ b/drivers/net/wireless/libertas/cmd.c
@@ -1120,7 +1120,7 @@ int libertas_set_mac_packet_filter(wlan_private * priv)
* @param cmd_action command action: GET or SET
* @param wait_option wait option: wait response or not
* @param cmd_oid cmd oid: treated as sub command
- * @param pdata_buf A pointer to informaion buffer
+ * @param pdata_buf A pointer to information buffer
* @return 0 or -1
*/
int libertas_prepare_and_send_command(wlan_private * priv,
@@ -1606,7 +1606,7 @@ static void cleanup_cmdnode(struct cmd_ctrl_node *ptempnode)
* @param ptempnode A pointer to cmd_ctrl_node structure
* @param cmd_oid cmd oid: treated as sub command
* @param wait_option wait option: wait response or not
- * @param pdata_buf A pointer to informaion buffer
+ * @param pdata_buf A pointer to information buffer
* @return 0 or -1
*/
void libertas_set_cmd_ctrl_node(wlan_private * priv,
diff --git a/drivers/net/wireless/libertas/scan.c b/drivers/net/wireless/libertas/scan.c
index ad1e67d..537b36c 100644
--- a/drivers/net/wireless/libertas/scan.c
+++ b/drivers/net/wireless/libertas/scan.c
@@ -443,7 +443,7 @@ wlan_scan_setup_scan_config(wlan_private * priv,
ptlvpos = pscancfgout->tlvbuffer;
/*
- * Set the initial scan paramters for progressive scanning. If a specific
+ * Set the initial scan parameters for progressive scanning. If a specific
* BSSID or SSID is used, the number of channels in the scan command
* will be increased to the absolute maximum
*/
@@ -1679,7 +1679,7 @@ int libertas_get_scan(struct net_device *dev, struct iw_request_info *info,
*
* Called from libertas_prepare_and_send_command() in cmd.c
*
- * Sends a fixed lenght data part (specifying the BSS type and BSSID filters)
+ * Sends a fixed length data part (specifying the BSS type and BSSID filters)
* as well as a variable number/length of TLVs to the firmware.
*
* @param priv A pointer to wlan_private structure
diff --git a/drivers/net/wireless/netwave_cs.c b/drivers/net/wireless/netwave_cs.c
index d2fa079..c4b649e 100644
--- a/drivers/net/wireless/netwave_cs.c
+++ b/drivers/net/wireless/netwave_cs.c
@@ -1408,7 +1408,7 @@ static void set_multicast_list(struct net_device *dev)
/* Multicast Mode */
rcvMode = rxConfRxEna + rxConfAMP + rxConfBcast;
} else if (dev->flags & IFF_PROMISC) {
- /* Promiscous mode */
+ /* Promiscuous mode */
rcvMode = rxConfRxEna + rxConfPro + rxConfAMP + rxConfBcast;
} else {
/* Normal mode */
diff --git a/drivers/net/wireless/orinoco.h b/drivers/net/wireless/orinoco.h
index 4720fb2..703a4cf 100644
--- a/drivers/net/wireless/orinoco.h
+++ b/drivers/net/wireless/orinoco.h
@@ -108,7 +108,7 @@ struct orinoco_private {
int scan_inprogress; /* Scan pending... */
u32 scan_mode; /* Type of scan done */
char * scan_result; /* Result of previous scan */
- int scan_len; /* Lenght of result */
+ int scan_len; /* Length of result */
};
#ifdef ORINOCO_DEBUG
diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c
index f87fe10..24f9066 100644
--- a/drivers/net/wireless/ray_cs.c
+++ b/drivers/net/wireless/ray_cs.c
@@ -129,7 +129,7 @@ static void ray_reset(struct net_device *dev);
static void ray_update_parm(struct net_device *dev, UCHAR objid, UCHAR *value, int len);
static void verify_dl_startup(u_long);
-/* Prototypes for interrpt time functions **********************************/
+/* Prototypes for interrupt time functions **********************************/
static irqreturn_t ray_interrupt (int reg, void *dev_id);
static void clear_interrupt(ray_dev_t *local);
static void rx_deauthenticate(ray_dev_t *local, struct rcs __iomem *prcs,
diff --git a/drivers/net/wireless/rt2x00/rt2x00reg.h b/drivers/net/wireless/rt2x00/rt2x00reg.h
index 8384212..fe9011d 100644
--- a/drivers/net/wireless/rt2x00/rt2x00reg.h
+++ b/drivers/net/wireless/rt2x00/rt2x00reg.h
@@ -230,7 +230,7 @@ static inline u8 rt2x00_get_field8(const u8 reg,
* corresponds with the TX register format for the current device.
* 4 - plcp, 802.11b rates are device specific,
* 802.11g rates are set according to the ieee802.11a-1999 p.14.
- * The bit to enable preamble is set in a seperate define.
+ * The bit to enable preamble is set in a separate define.
*/
#define DEV_RATE FIELD32(0x000007ff)
#define DEV_PREAMBLE FIELD32(0x00000800)
diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.h b/drivers/net/wireless/rt2x00/rt2x00usb.h
index 2681abe..b76881f 100644
--- a/drivers/net/wireless/rt2x00/rt2x00usb.h
+++ b/drivers/net/wireless/rt2x00/rt2x00usb.h
@@ -135,13 +135,13 @@ static inline int rt2x00usb_vendor_request_sw(const struct rt2x00_dev
* kmalloc for correct handling inside the kernel USB layer.
*/
static inline int rt2x00usb_eeprom_read(const struct rt2x00_dev *rt2x00dev,
- __le16 *eeprom, const u16 lenght)
+ __le16 *eeprom, const u16 length)
{
- int timeout = REGISTER_TIMEOUT * (lenght / sizeof(u16));
+ int timeout = REGISTER_TIMEOUT * (length / sizeof(u16));
return rt2x00usb_vendor_request(rt2x00dev, USB_EEPROM_READ,
USB_VENDOR_REQUEST_IN, 0x0000,
- 0x0000, eeprom, lenght, timeout);
+ 0x0000, eeprom, length, timeout);
}
/*
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index c0671c2..d1468a1 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -833,7 +833,7 @@ static int rt73usb_load_firmware(struct rt2x00_dev *rt2x00dev, void *data,
/*
* Write firmware to device.
- * We setup a seperate cache for this action,
+ * We setup a separate cache for this action,
* since we are going to write larger chunks of data
* then normally used cache size.
*/
diff --git a/drivers/net/wireless/wavelan_cs.c b/drivers/net/wireless/wavelan_cs.c
index 577c647..5d28105 100644
--- a/drivers/net/wireless/wavelan_cs.c
+++ b/drivers/net/wireless/wavelan_cs.c
@@ -159,7 +159,7 @@ psa_read(struct net_device * dev,
/*------------------------------------------------------------------*/
/*
- * Write the Paramter Storage Area to the WaveLAN card's memory
+ * Write the Parameter Storage Area to the WaveLAN card's memory
*/
static void
psa_write(struct net_device * dev,
diff --git a/drivers/net/wireless/zd1211rw/zd_chip.h b/drivers/net/wireless/zd1211rw/zd_chip.h
index 8009b70..301315a 100644
--- a/drivers/net/wireless/zd1211rw/zd_chip.h
+++ b/drivers/net/wireless/zd1211rw/zd_chip.h
@@ -620,8 +620,8 @@ enum {
#define E2P_PWR_INT_GUARD 8
#define E2P_CHANNEL_COUNT 14
-/* If you compare this addresses with the ZYDAS orignal driver, please notify
- * that we use word mapping for the EEPROM.
+/* If you compare these addresses with the ZYDAS original driver,
+ * please notice that we use word mapping for the EEPROM.
*/
/*
diff --git a/drivers/net/yellowfin.c b/drivers/net/yellowfin.c
index 87f002a..cb6e978 100644
--- a/drivers/net/yellowfin.c
+++ b/drivers/net/yellowfin.c
@@ -533,7 +533,7 @@ static int __devinit read_eeprom(void __iomem *ioaddr, int location)
return ioread8(ioaddr + EERead);
}
-/* MII Managemen Data I/O accesses.
+/* MII Management Data I/O accesses.
These routines assume the MDIO controller is idle, and do not exit until
the command is finished. */
--
1.5.3.7.949.g2221a6
^ permalink raw reply related [flat|nested] 34+ messages in thread* [PATCH] drivers/net/: Spelling fixes
@ 2007-12-17 19:40 ` Joe Perches
0 siblings, 0 replies; 34+ messages in thread
From: Joe Perches @ 2007-12-17 19:40 UTC (permalink / raw)
To: linux-kernel
Cc: Pavel Roskin, David Gibson, orinoco-devel, Yi Zhu,
Jaroslav Kysela, linuxppc-dev, netdev, Paul Mackerras,
Peter De Shrijver, Rastapur Santosh, bonding-devel,
Andy Gospodarek, Amit S. Kale, ipw2100-devel, ipw3945-devel,
libertas-dev, Dan Williams, Jesse Brandeburg, Manish Lachwani,
Jean Tourrilhes, Jeff Kirsher, Arnaldo Carvalho de Melo,
Francois Romieu, Danie
Signed-off-by: Joe Perches <joe@perches.com>
---
drivers/net/82596.c | 2 +-
drivers/net/amd8111e.c | 8 ++++----
drivers/net/amd8111e.h | 2 +-
drivers/net/appletalk/ltpc.c | 2 +-
drivers/net/atl1/atl1_hw.c | 2 +-
drivers/net/atl1/atl1_main.c | 2 +-
drivers/net/bonding/bond_3ad.c | 4 ++--
drivers/net/chelsio/sge.c | 2 +-
drivers/net/chelsio/subr.c | 2 +-
drivers/net/cxgb3/t3_hw.c | 2 +-
drivers/net/e1000/e1000_hw.c | 4 ++--
drivers/net/e1000/e1000_hw.h | 2 +-
drivers/net/e1000/e1000_main.c | 2 +-
drivers/net/e1000e/netdev.c | 2 +-
drivers/net/eepro.c | 2 +-
drivers/net/ehea/ehea.h | 2 +-
drivers/net/forcedeth.c | 2 +-
drivers/net/hamachi.c | 4 ++--
drivers/net/hp100.c | 2 +-
drivers/net/hp100.h | 4 ++--
drivers/net/ibm_emac/ibm_emac.h | 2 +-
drivers/net/ibm_newemac/emac.h | 2 +-
drivers/net/ibmlana.c | 2 +-
drivers/net/ibmlana.h | 2 +-
drivers/net/ipg.c | 4 ++--
drivers/net/irda/ali-ircc.c | 6 +++---
drivers/net/irda/ali-ircc.h | 4 ++--
drivers/net/irda/donauboe.h | 2 +-
drivers/net/irda/irport.c | 4 ++--
drivers/net/irda/nsc-ircc.h | 4 ++--
drivers/net/irda/smsc-ircc2.c | 4 ++--
drivers/net/irda/via-ircc.h | 4 ++--
drivers/net/ixgbe/ixgbe_common.c | 4 ++--
drivers/net/ixgbe/ixgbe_main.c | 2 +-
drivers/net/lasi_82596.c | 2 +-
drivers/net/lib82596.c | 2 +-
drivers/net/macb.c | 2 +-
drivers/net/meth.h | 2 +-
drivers/net/mv643xx_eth.c | 4 ++--
drivers/net/netxen/netxen_nic_hw.h | 2 +-
drivers/net/ppp_generic.c | 2 +-
drivers/net/ps3_gelic_net.c | 2 +-
drivers/net/qla3xxx.c | 2 +-
drivers/net/s2io.h | 2 +-
drivers/net/sis190.c | 2 +-
drivers/net/sk98lin/skgepnmi.c | 2 +-
drivers/net/sk98lin/skxmac2.c | 4 ++--
drivers/net/skfp/ess.c | 2 +-
drivers/net/skfp/fplustm.c | 6 +++---
drivers/net/skfp/h/fplustm.h | 4 ++--
drivers/net/skfp/h/smt.h | 2 +-
drivers/net/skfp/h/supern_2.h | 2 +-
drivers/net/smc911x.c | 2 +-
drivers/net/spider_net.c | 2 +-
drivers/net/sunbmac.h | 2 +-
drivers/net/sungem.c | 2 +-
drivers/net/sunhme.h | 2 +-
drivers/net/tc35815.c | 4 ++--
drivers/net/tehuti.c | 2 +-
drivers/net/tehuti.h | 2 +-
drivers/net/tokenring/3c359.c | 2 +-
drivers/net/tokenring/lanstreamer.c | 2 +-
drivers/net/tokenring/olympic.c | 2 +-
drivers/net/tokenring/smctr.c | 6 +++---
drivers/net/tokenring/tms380tr.c | 2 +-
drivers/net/tokenring/tms380tr.h | 2 +-
drivers/net/tulip/xircom_cb.c | 2 +-
drivers/net/tun.c | 4 ++--
drivers/net/ucc_geth_ethtool.c | 2 +-
drivers/net/ucc_geth_mii.c | 6 +++---
drivers/net/wan/cycx_drv.c | 4 ++--
drivers/net/wan/sbni.c | 2 +-
drivers/net/wireless/atmel.c | 2 +-
drivers/net/wireless/bcm43xx/bcm43xx_debugfs.h | 2 +-
drivers/net/wireless/ipw2200.c | 2 +-
drivers/net/wireless/iwlwifi/iwl-4965.c | 2 +-
drivers/net/wireless/libertas/cmd.c | 4 ++--
drivers/net/wireless/libertas/scan.c | 4 ++--
drivers/net/wireless/netwave_cs.c | 2 +-
drivers/net/wireless/orinoco.h | 2 +-
drivers/net/wireless/ray_cs.c | 2 +-
drivers/net/wireless/rt2x00/rt2x00reg.h | 2 +-
drivers/net/wireless/rt2x00/rt2x00usb.h | 6 +++---
drivers/net/wireless/rt2x00/rt73usb.c | 2 +-
drivers/net/wireless/wavelan_cs.c | 2 +-
drivers/net/wireless/zd1211rw/zd_chip.h | 4 ++--
drivers/net/yellowfin.c | 2 +-
87 files changed, 120 insertions(+), 120 deletions(-)
diff --git a/drivers/net/82596.c b/drivers/net/82596.c
index 2797da7..d999b63 100644
--- a/drivers/net/82596.c
+++ b/drivers/net/82596.c
@@ -19,7 +19,7 @@
TBD:
* look at deferring rx frames rather than discarding (as per tulip)
* handle tx ring full as per tulip
- * performace test to tune rx_copybreak
+ * performance test to tune rx_copybreak
Most of my modifications relate to the braindead big-endian
implementation by Intel. When the i596 is operating in
diff --git a/drivers/net/amd8111e.c b/drivers/net/amd8111e.c
index e7fdd81..5cefe92 100644
--- a/drivers/net/amd8111e.c
+++ b/drivers/net/amd8111e.c
@@ -1283,7 +1283,7 @@ static irqreturn_t amd8111e_interrupt(int irq, void *dev_id)
#ifdef CONFIG_AMD8111E_NAPI
if(intr0 & RINT0){
if(netif_rx_schedule_prep(dev, &lp->napi)){
- /* Disable receive interupts */
+ /* Disable receive interrupts */
writel(RINTEN0, mmio + INTEN0);
/* Schedule a polling routine */
__netif_rx_schedule(dev, &lp->napi);
@@ -1493,7 +1493,7 @@ static void amd8111e_read_regs(struct amd8111e_priv *lp, u32 *buf)
/*
-This function sets promiscuos mode, all-multi mode or the multicast address
+This function sets promiscuous mode, all-multi mode or the multicast address
list to the device.
*/
static void amd8111e_set_multicast_list(struct net_device *dev)
@@ -1522,7 +1522,7 @@ static void amd8111e_set_multicast_list(struct net_device *dev)
lp->mc_list = NULL;
lp->options &= ~OPTION_MULTICAST_ENABLE;
amd8111e_writeq(*(u64*)mc_filter,lp->mmio + LADRF);
- /* disable promiscous mode */
+ /* disable promiscuous mode */
writel(PROM, lp->mmio + CMD2);
return;
}
@@ -2016,7 +2016,7 @@ static int __devinit amd8111e_probe_one(struct pci_dev *pdev,
for(i = 0; i < ETH_ADDR_LEN; i++)
dev->dev_addr[i] = readb(lp->mmio + PADR + i);
- /* Setting user defined parametrs */
+ /* Setting user defined parameters */
lp->ext_phy_option = speed_duplex[card_idx];
if(coalesce[card_idx])
lp->options |= OPTION_INTR_COAL_ENABLE;
diff --git a/drivers/net/amd8111e.h b/drivers/net/amd8111e.h
index 28c60a7..7d288de 100644
--- a/drivers/net/amd8111e.h
+++ b/drivers/net/amd8111e.h
@@ -614,7 +614,7 @@ typedef enum {
#define CSTATE 1
#define SSTATE 2
-/* Assume contoller gets data 10 times the maximum processing time */
+/* Assume controller gets data 10 times the maximum processing time */
#define REPEAT_CNT 10
/* amd8111e decriptor flag definitions */
diff --git a/drivers/net/appletalk/ltpc.c b/drivers/net/appletalk/ltpc.c
index 6ab2c2d..86a9496 100644
--- a/drivers/net/appletalk/ltpc.c
+++ b/drivers/net/appletalk/ltpc.c
@@ -1233,7 +1233,7 @@ static int __init ltpc_setup(char *str)
if (ints[0] > 2) {
dma = ints[3];
}
- /* ignore any other paramters */
+ /* ignore any other parameters */
}
return 1;
}
diff --git a/drivers/net/atl1/atl1_hw.c b/drivers/net/atl1/atl1_hw.c
index 9d3bd22..82359f7 100644
--- a/drivers/net/atl1/atl1_hw.c
+++ b/drivers/net/atl1/atl1_hw.c
@@ -645,7 +645,7 @@ s32 atl1_init_hw(struct atl1_hw *hw)
atl1_init_flash_opcode(hw);
if (!hw->phy_configured) {
- /* enable GPHY LinkChange Interrrupt */
+ /* enable GPHY LinkChange Interrupt */
ret_val = atl1_write_phy_reg(hw, 18, 0xC00);
if (ret_val)
return ret_val;
diff --git a/drivers/net/atl1/atl1_main.c b/drivers/net/atl1/atl1_main.c
index 35b0a7d..7599163 100644
--- a/drivers/net/atl1/atl1_main.c
+++ b/drivers/net/atl1/atl1_main.c
@@ -575,7 +575,7 @@ static u32 atl1_check_link(struct atl1_adapter *adapter)
return ATL1_SUCCESS;
}
- /* change orignal link status */
+ /* change original link status */
if (netif_carrier_ok(netdev)) {
adapter->link_speed = SPEED_0;
netif_carrier_off(netdev);
diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c
index cb3c6fa..96f0f24 100644
--- a/drivers/net/bonding/bond_3ad.c
+++ b/drivers/net/bonding/bond_3ad.c
@@ -869,7 +869,7 @@ static int ad_lacpdu_send(struct port *port)
lacpdu_header = (struct lacpdu_header *)skb_put(skb, length);
lacpdu_header->ad_header.destination_address = lacpdu_multicast_address;
- /* Note: source addres is set to be the member's PERMANENT address, because we use it
+ /* Note: source address is set to be the member's PERMANENT address, because we use it
to identify loopback lacpdus in receive. */
lacpdu_header->ad_header.source_address = *((struct mac_addr *)(slave->perm_hwaddr));
lacpdu_header->ad_header.length_type = PKT_TYPE_LACPDU;
@@ -912,7 +912,7 @@ static int ad_marker_send(struct port *port, struct bond_marker *marker)
marker_header = (struct bond_marker_header *)skb_put(skb, length);
marker_header->ad_header.destination_address = lacpdu_multicast_address;
- /* Note: source addres is set to be the member's PERMANENT address, because we use it
+ /* Note: source address is set to be the member's PERMANENT address, because we use it
to identify loopback MARKERs in receive. */
marker_header->ad_header.source_address = *((struct mac_addr *)(slave->perm_hwaddr));
marker_header->ad_header.length_type = PKT_TYPE_LACPDU;
diff --git a/drivers/net/chelsio/sge.c b/drivers/net/chelsio/sge.c
index b301c04..ed17cd9 100644
--- a/drivers/net/chelsio/sge.c
+++ b/drivers/net/chelsio/sge.c
@@ -248,7 +248,7 @@ static void restart_sched(unsigned long);
*
* Interrupts are handled by a single CPU and it is likely that on a MP system
* the application is migrated to another CPU. In that scenario, we try to
- * seperate the RX(in irq context) and TX state in order to decrease memory
+ * separate the RX(in irq context) and TX state in order to decrease memory
* contention.
*/
struct sge {
diff --git a/drivers/net/chelsio/subr.c b/drivers/net/chelsio/subr.c
index dc50151..7c95578 100644
--- a/drivers/net/chelsio/subr.c
+++ b/drivers/net/chelsio/subr.c
@@ -559,7 +559,7 @@ struct chelsio_vpd_t {
#define EEPROM_MAX_POLL 4
/*
- * Read SEEPROM. A zero is written to the flag register when the addres is
+ * Read SEEPROM. A zero is written to the flag register when the address is
* written to the Control register. The hardware device will set the flag to a
* one when 4B have been transferred to the Data register.
*/
diff --git a/drivers/net/cxgb3/t3_hw.c b/drivers/net/cxgb3/t3_hw.c
index 522834c..2882e36 100644
--- a/drivers/net/cxgb3/t3_hw.c
+++ b/drivers/net/cxgb3/t3_hw.c
@@ -534,7 +534,7 @@ struct t3_vpd {
*
* Read a 32-bit word from a location in VPD EEPROM using the card's PCI
* VPD ROM capability. A zero is written to the flag bit when the
- * addres is written to the control register. The hardware device will
+ * address is written to the control register. The hardware device will
* set the flag to 1 when 4 bytes have been read into the data register.
*/
int t3_seeprom_read(struct adapter *adapter, u32 addr, u32 *data)
diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c
index 7c6888c..fd7e6a8 100644
--- a/drivers/net/e1000/e1000_hw.c
+++ b/drivers/net/e1000/e1000_hw.c
@@ -803,7 +803,7 @@ e1000_initialize_hardware_bits(struct e1000_hw *hw)
E1000_WRITE_REG(hw, CTRL, reg_ctrl);
break;
case e1000_80003es2lan:
- /* improve small packet performace for fiber/serdes */
+ /* improve small packet performance for fiber/serdes */
if ((hw->media_type == e1000_media_type_fiber) ||
(hw->media_type == e1000_media_type_internal_serdes)) {
reg_tarc0 &= ~(1 << 20);
@@ -5001,7 +5001,7 @@ e1000_read_eeprom(struct e1000_hw *hw,
return -E1000_ERR_EEPROM;
}
- /* Eerd register EEPROM access requires no eeprom aquire/release */
+ /* Eerd register EEPROM access requires no eeprom acquire/release */
if (eeprom->use_eerd == TRUE)
return e1000_read_eeprom_eerd(hw, offset, words, data);
diff --git a/drivers/net/e1000/e1000_hw.h b/drivers/net/e1000/e1000_hw.h
index a2a86c5..e40e515 100644
--- a/drivers/net/e1000/e1000_hw.h
+++ b/drivers/net/e1000/e1000_hw.h
@@ -1068,7 +1068,7 @@ struct e1000_ffvt_entry {
#define E1000_KUMCTRLSTA 0x00034 /* MAC-PHY interface - RW */
#define E1000_MDPHYA 0x0003C /* PHY address - RW */
-#define E1000_MANC2H 0x05860 /* Managment Control To Host - RW */
+#define E1000_MANC2H 0x05860 /* Management Control To Host - RW */
#define E1000_SW_FW_SYNC 0x05B5C /* Software-Firmware Synchronization - RW */
#define E1000_GCR 0x05B00 /* PCI-Ex Control */
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index 4f37506..24a2fc1 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -235,7 +235,7 @@ static struct pci_driver e1000_driver = {
.probe = e1000_probe,
.remove = __devexit_p(e1000_remove),
#ifdef CONFIG_PM
- /* Power Managment Hooks */
+ /* Power Management Hooks */
.suspend = e1000_suspend,
.resume = e1000_resume,
#endif
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index 4fd2e23..febe157 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -4109,7 +4109,7 @@ static struct pci_driver e1000_driver = {
.probe = e1000_probe,
.remove = __devexit_p(e1000_remove),
#ifdef CONFIG_PM
- /* Power Managment Hooks */
+ /* Power Management Hooks */
.suspend = e1000_suspend,
.resume = e1000_resume,
#endif
diff --git a/drivers/net/eepro.c b/drivers/net/eepro.c
index 83bda6c..d3789c5 100644
--- a/drivers/net/eepro.c
+++ b/drivers/net/eepro.c
@@ -1764,7 +1764,7 @@ module_param_array(io, int, NULL, 0);
module_param_array(irq, int, NULL, 0);
module_param_array(mem, int, NULL, 0);
module_param(autodetect, int, 0);
-MODULE_PARM_DESC(io, "EtherExpress Pro/10 I/O base addres(es)");
+MODULE_PARM_DESC(io, "EtherExpress Pro/10 I/O base address(es)");
MODULE_PARM_DESC(irq, "EtherExpress Pro/10 IRQ number(s)");
MODULE_PARM_DESC(mem, "EtherExpress Pro/10 Rx buffer size(es) in kB (3-29)");
MODULE_PARM_DESC(autodetect, "EtherExpress Pro/10 force board(s) detection (0-1)");
diff --git a/drivers/net/ehea/ehea.h b/drivers/net/ehea/ehea.h
index 5f82a46..a50b238 100644
--- a/drivers/net/ehea/ehea.h
+++ b/drivers/net/ehea/ehea.h
@@ -251,7 +251,7 @@ struct ehea_qp_init_attr {
};
/*
- * Event Queue attributes, passed as paramter
+ * Event Queue attributes, passed as parameter
*/
struct ehea_eq_attr {
u32 type;
diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index a96583c..7119332 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -490,7 +490,7 @@ union ring_type {
#define NV_RX3_VLAN_TAG_PRESENT (1<<16)
#define NV_RX3_VLAN_TAG_MASK (0x0000FFFF)
-/* Miscelaneous hardware related defines: */
+/* Miscellaneous hardware related defines: */
#define NV_PCI_REGSZ_VER1 0x270
#define NV_PCI_REGSZ_VER2 0x2d4
#define NV_PCI_REGSZ_VER3 0x604
diff --git a/drivers/net/hamachi.c b/drivers/net/hamachi.c
index ed407c8..683b289 100644
--- a/drivers/net/hamachi.c
+++ b/drivers/net/hamachi.c
@@ -86,7 +86,7 @@ static int force32;
static int options[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
static int full_duplex[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
/* The Hamachi chipset supports 3 parameters each for Rx and Tx
- * interruput management. Parameters will be loaded as specified into
+ * interrupt management. Parameters will be loaded as specified into
* the TxIntControl and RxIntControl registers.
*
* The registers are arranged as follows:
@@ -811,7 +811,7 @@ static int __devinit read_eeprom(void __iomem *ioaddr, int location)
return readb(ioaddr + EEData);
}
-/* MII Managemen Data I/O accesses.
+/* MII Management Data I/O accesses.
These routines assume the MDIO controller is idle, and do not exit until
the command is finished. */
diff --git a/drivers/net/hp100.c b/drivers/net/hp100.c
index 49421d1..8b90d64 100644
--- a/drivers/net/hp100.c
+++ b/drivers/net/hp100.c
@@ -2643,7 +2643,7 @@ static int hp100_login_to_vg_hub(struct net_device *dev, u_short force_relogin)
} else {
hp100_andb(~HP100_PROM_MODE, VG_LAN_CFG_2);
/* For ETR parts we need to reset the prom. bit in the training
- * register, otherwise promiscious mode won't be disabled.
+ * register, otherwise promiscuous mode won't be disabled.
*/
if (lp->chip == HP100_CHIPID_LASSEN) {
hp100_andw(~HP100_MACRQ_PROMSC, TRAIN_REQUEST);
diff --git a/drivers/net/hp100.h b/drivers/net/hp100.h
index e6ca128..e74e45d 100644
--- a/drivers/net/hp100.h
+++ b/drivers/net/hp100.h
@@ -476,7 +476,7 @@
#define HP100_MACRQ_REPEATER 0x0001 /* 1: MAC tells HUB it wants to be
* a cascaded repeater
* 0: ... wants to be a DTE */
-#define HP100_MACRQ_PROMSC 0x0006 /* 2 bits: Promiscious mode
+#define HP100_MACRQ_PROMSC 0x0006 /* 2 bits: Promiscuous mode
* 00: Rcv only unicast packets
* specifically addr to this
* endnode
@@ -488,7 +488,7 @@
#define HP100_CARD_MACVER 0xe000 /* R: 3 bit Cards 100VG MAC version */
#define HP100_MALLOW_REPEATER 0x0001 /* If reset, requested access as an
* end node is allowed */
-#define HP100_MALLOW_PROMSC 0x0004 /* 2 bits: Promiscious mode
+#define HP100_MALLOW_PROMSC 0x0004 /* 2 bits: Promiscuous mode
* 00: Rcv only unicast packets
* specifically addr to this
* endnode
diff --git a/drivers/net/ibm_emac/ibm_emac.h b/drivers/net/ibm_emac/ibm_emac.h
index 97ed22b..655be50 100644
--- a/drivers/net/ibm_emac/ibm_emac.h
+++ b/drivers/net/ibm_emac/ibm_emac.h
@@ -1,7 +1,7 @@
/*
* drivers/net/ibm_emac/ibm_emac.h
*
- * Register definitions for PowerPC 4xx on-chip ethernet contoller
+ * Register definitions for PowerPC 4xx on-chip ethernet controller
*
* Copyright (c) 2004, 2005 Zultys Technologies.
* Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
diff --git a/drivers/net/ibm_newemac/emac.h b/drivers/net/ibm_newemac/emac.h
index 91cb096..49a540a 100644
--- a/drivers/net/ibm_newemac/emac.h
+++ b/drivers/net/ibm_newemac/emac.h
@@ -1,7 +1,7 @@
/*
* drivers/net/ibm_newemac/emac.h
*
- * Register definitions for PowerPC 4xx on-chip ethernet contoller
+ * Register definitions for PowerPC 4xx on-chip ethernet controller
*
* Copyright 2007 Benjamin Herrenschmidt, IBM Corp.
* <benh@kernel.crashing.org>
diff --git a/drivers/net/ibmlana.c b/drivers/net/ibmlana.c
index 91d83ac..5a9b6fa 100644
--- a/drivers/net/ibmlana.c
+++ b/drivers/net/ibmlana.c
@@ -481,7 +481,7 @@ static void InitBoard(struct net_device *dev)
if ((dev->flags & IFF_ALLMULTI) || (mcptr != NULL))
rcrval |= RCREG_AMC;
- /* promiscous mode ? */
+ /* promiscuous mode ? */
if (dev->flags & IFF_PROMISC)
rcrval |= RCREG_PRO;
diff --git a/drivers/net/ibmlana.h b/drivers/net/ibmlana.h
index aa3ddbd..654af95 100644
--- a/drivers/net/ibmlana.h
+++ b/drivers/net/ibmlana.h
@@ -90,7 +90,7 @@ typedef struct {
#define RCREG_ERR 0x8000 /* accept damaged and collided pkts */
#define RCREG_RNT 0x4000 /* accept packets that are < 64 */
#define RCREG_BRD 0x2000 /* accept broadcasts */
-#define RCREG_PRO 0x1000 /* promiscous mode */
+#define RCREG_PRO 0x1000 /* promiscuous mode */
#define RCREG_AMC 0x0800 /* accept all multicasts */
#define RCREG_LB_NONE 0x0000 /* no loopback */
#define RCREG_LB_MAC 0x0200 /* MAC loopback */
diff --git a/drivers/net/ipg.c b/drivers/net/ipg.c
index dbd23bb..27d12eb 100644
--- a/drivers/net/ipg.c
+++ b/drivers/net/ipg.c
@@ -209,7 +209,7 @@ static int mdio_read(struct net_device * dev, int phy_id, int phy_reg)
{
void __iomem *ioaddr = ipg_ioaddr(dev);
/*
- * The GMII mangement frame structure for a read is as follows:
+ * The GMII management frame structure for a read is as follows:
*
* |Preamble|st|op|phyad|regad|ta| data |idle|
* |< 32 1s>|01|10|AAAAA|RRRRR|z0|DDDDDDDDDDDDDDDD|z |
@@ -300,7 +300,7 @@ static void mdio_write(struct net_device *dev, int phy_id, int phy_reg, int val)
{
void __iomem *ioaddr = ipg_ioaddr(dev);
/*
- * The GMII mangement frame structure for a read is as follows:
+ * The GMII management frame structure for a read is as follows:
*
* |Preamble|st|op|phyad|regad|ta| data |idle|
* |< 32 1s>|01|10|AAAAA|RRRRR|z0|DDDDDDDDDDDDDDDD|z |
diff --git a/drivers/net/irda/ali-ircc.c b/drivers/net/irda/ali-ircc.c
index 9f58452..94140f7 100644
--- a/drivers/net/irda/ali-ircc.c
+++ b/drivers/net/irda/ali-ircc.c
@@ -977,7 +977,7 @@ static void ali_ircc_change_speed(struct ali_ircc_cb *self, __u32 baud)
/* Install FIR xmit handler*/
dev->hard_start_xmit = ali_ircc_fir_hard_xmit;
- /* Enable Interuupt */
+ /* Enable Interrupt */
self->ier = IER_EOM; // benjamin 2000/11/20 07:24PM
/* Be ready for incomming frames */
@@ -1096,7 +1096,7 @@ static void ali_ircc_sir_change_speed(struct ali_ircc_cb *priv, __u32 speed)
outb(lcr, iobase+UART_LCR); /* Set 8N1 */
outb(fcr, iobase+UART_FCR); /* Enable FIFO's */
- /* without this, the conection will be broken after come back from FIR speed,
+ /* without this, the connection will be broken after come back from FIR speed,
but with this, the SIR connection is harder to established */
outb((UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2), iobase+UART_MCR);
@@ -1359,7 +1359,7 @@ static int ali_ircc_net_open(struct net_device *dev)
return -EAGAIN;
}
- /* Turn on interrups */
+ /* Turn on interrupts */
outb(UART_IER_RDI , iobase+UART_IER);
/* Ready to play! */
diff --git a/drivers/net/irda/ali-ircc.h b/drivers/net/irda/ali-ircc.h
index e489c66..0787657 100644
--- a/drivers/net/irda/ali-ircc.h
+++ b/drivers/net/irda/ali-ircc.h
@@ -173,13 +173,13 @@ struct st_fifo {
struct frame_cb {
void *start; /* Start of frame in DMA mem */
- int len; /* Lenght of frame in DMA mem */
+ int len; /* Length of frame in DMA mem */
};
struct tx_fifo {
struct frame_cb queue[MAX_TX_WINDOW]; /* Info about frames in queue */
int ptr; /* Currently being sent */
- int len; /* Lenght of queue */
+ int len; /* Length of queue */
int free; /* Next free slot */
void *tail; /* Next free start in DMA mem */
};
diff --git a/drivers/net/irda/donauboe.h b/drivers/net/irda/donauboe.h
index 1e67720..9db3cce 100644
--- a/drivers/net/irda/donauboe.h
+++ b/drivers/net/irda/donauboe.h
@@ -30,7 +30,7 @@
* or the type-DO IR port.
*
* IrDA chip set list from Toshiba Computer Engineering Corp.
- * model method maker controler Version
+ * model method maker controller Version
* Portege 320CT FIR,SIR Toshiba Oboe(Triangle)
* Portege 3010CT FIR,SIR Toshiba Oboe(Sydney)
* Portege 3015CT FIR,SIR Toshiba Oboe(Sydney)
diff --git a/drivers/net/irda/irport.c b/drivers/net/irda/irport.c
index c79caa5..2b2a955 100644
--- a/drivers/net/irda/irport.c
+++ b/drivers/net/irda/irport.c
@@ -276,7 +276,7 @@ static void irport_start(struct irport_cb *self)
outb(UART_LCR_WLEN8, iobase+UART_LCR); /* Reset DLAB */
outb((UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2), iobase+UART_MCR);
- /* Turn on interrups */
+ /* Turn on interrupts */
outb(UART_IER_RLSI | UART_IER_RDI |UART_IER_THRI, iobase+UART_IER);
}
@@ -352,7 +352,7 @@ static void irport_change_speed(void *priv, __u32 speed)
outb(lcr, iobase+UART_LCR); /* Set 8N1 */
outb(fcr, iobase+UART_FCR); /* Enable FIFO's */
- /* Turn on interrups */
+ /* Turn on interrupts */
/* This will generate a fatal interrupt storm.
* People calling us will do that properly - Jean II */
//outb(/*UART_IER_RLSI|*/UART_IER_RDI/*|UART_IER_THRI*/, iobase+UART_IER);
diff --git a/drivers/net/irda/nsc-ircc.h b/drivers/net/irda/nsc-ircc.h
index bbdc97f..29398a4 100644
--- a/drivers/net/irda/nsc-ircc.h
+++ b/drivers/net/irda/nsc-ircc.h
@@ -231,13 +231,13 @@ struct st_fifo {
struct frame_cb {
void *start; /* Start of frame in DMA mem */
- int len; /* Lenght of frame in DMA mem */
+ int len; /* Length of frame in DMA mem */
};
struct tx_fifo {
struct frame_cb queue[MAX_TX_WINDOW]; /* Info about frames in queue */
int ptr; /* Currently being sent */
- int len; /* Lenght of queue */
+ int len; /* Length of queue */
int free; /* Next free slot */
void *tail; /* Next free start in DMA mem */
};
diff --git a/drivers/net/irda/smsc-ircc2.c b/drivers/net/irda/smsc-ircc2.c
index 7e7b582..7fd9a48 100644
--- a/drivers/net/irda/smsc-ircc2.c
+++ b/drivers/net/irda/smsc-ircc2.c
@@ -1165,7 +1165,7 @@ void smsc_ircc_set_sir_speed(struct smsc_ircc_cb *self, __u32 speed)
outb(lcr, iobase + UART_LCR); /* Set 8N1 */
outb(fcr, iobase + UART_FCR); /* Enable FIFO's */
- /* Turn on interrups */
+ /* Turn on interrupts */
outb(UART_IER_RLSI | UART_IER_RDI | UART_IER_THRI, iobase + UART_IER);
IRDA_DEBUG(2, "%s() speed changed to: %d\n", __FUNCTION__, speed);
@@ -1930,7 +1930,7 @@ void smsc_ircc_sir_start(struct smsc_ircc_cb *self)
outb(UART_LCR_WLEN8, sir_base + UART_LCR); /* Reset DLAB */
outb((UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2), sir_base + UART_MCR);
- /* Turn on interrups */
+ /* Turn on interrupts */
outb(UART_IER_RLSI | UART_IER_RDI |UART_IER_THRI, sir_base + UART_IER);
IRDA_DEBUG(3, "%s() - exit\n", __FUNCTION__);
diff --git a/drivers/net/irda/via-ircc.h b/drivers/net/irda/via-ircc.h
index 204b1b3..9d012f0 100644
--- a/drivers/net/irda/via-ircc.h
+++ b/drivers/net/irda/via-ircc.h
@@ -54,13 +54,13 @@ struct st_fifo {
struct frame_cb {
void *start; /* Start of frame in DMA mem */
- int len; /* Lenght of frame in DMA mem */
+ int len; /* Length of frame in DMA mem */
};
struct tx_fifo {
struct frame_cb queue[MAX_TX_WINDOW + 2]; /* Info about frames in queue */
int ptr; /* Currently being sent */
- int len; /* Lenght of queue */
+ int len; /* Length of queue */
int free; /* Next free slot */
void *tail; /* Next free start in DMA mem */
};
diff --git a/drivers/net/ixgbe/ixgbe_common.c b/drivers/net/ixgbe/ixgbe_common.c
index 512e3b2..4b6359e 100644
--- a/drivers/net/ixgbe/ixgbe_common.c
+++ b/drivers/net/ixgbe/ixgbe_common.c
@@ -716,7 +716,7 @@ static s32 ixgbe_init_rx_addrs(struct ixgbe_hw *hw)
* bit-vector to set in the multicast table. The hardware uses 12 bits, from
* incoming rx multicast addresses, to determine the bit-vector to check in
* the MTA. Which of the 4 combination, of 12-bits, the hardware uses is set
- * by the MO field of the MCSTCTRL. The MO field is set during initalization
+ * by the MO field of the MCSTCTRL. The MO field is set during initialization
* to mc_filter_type.
**/
static s32 ixgbe_mta_vector(struct ixgbe_hw *hw, u8 *mc_addr)
@@ -1066,7 +1066,7 @@ s32 ixgbe_disable_pcie_master(struct ixgbe_hw *hw)
/**
- * ixgbe_acquire_swfw_sync - Aquire SWFW semaphore
+ * ixgbe_acquire_swfw_sync - Acquire SWFW semaphore
* @hw: pointer to hardware structure
* @mask: Mask to specify wich semaphore to acquire
*
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index 00bc525..25a9cc2 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -592,7 +592,7 @@ quit_polling:
* ixgbe_setup_msix - Initialize MSI-X interrupts
*
* ixgbe_setup_msix allocates MSI-X vectors and requests
- * interrutps from the kernel.
+ * interrupts from the kernel.
**/
static int ixgbe_setup_msix(struct ixgbe_adapter *adapter)
{
diff --git a/drivers/net/lasi_82596.c b/drivers/net/lasi_82596.c
index efbae4b..1ba38c2 100644
--- a/drivers/net/lasi_82596.c
+++ b/drivers/net/lasi_82596.c
@@ -47,7 +47,7 @@
TBD:
* look at deferring rx frames rather than discarding (as per tulip)
* handle tx ring full as per tulip
- * performace test to tune rx_copybreak
+ * performance test to tune rx_copybreak
Most of my modifications relate to the braindead big-endian
implementation by Intel. When the i596 is operating in
diff --git a/drivers/net/lib82596.c b/drivers/net/lib82596.c
index b59f442..c335d31 100644
--- a/drivers/net/lib82596.c
+++ b/drivers/net/lib82596.c
@@ -47,7 +47,7 @@
TBD:
* look at deferring rx frames rather than discarding (as per tulip)
* handle tx ring full as per tulip
- * performace test to tune rx_copybreak
+ * performance test to tune rx_copybreak
Most of my modifications relate to the braindead big-endian
implementation by Intel. When the i596 is operating in
diff --git a/drivers/net/macb.c b/drivers/net/macb.c
index 047ea7b..1367178 100644
--- a/drivers/net/macb.c
+++ b/drivers/net/macb.c
@@ -239,7 +239,7 @@ static int macb_mii_init(struct macb *bp)
struct eth_platform_data *pdata;
int err = -ENXIO, i;
- /* Enable managment port */
+ /* Enable management port */
macb_writel(bp, NCR, MACB_BIT(MPE));
bp->mii_bus.name = "MACB_mii_bus",
diff --git a/drivers/net/meth.h b/drivers/net/meth.h
index a78dc1c..ecd0e97 100644
--- a/drivers/net/meth.h
+++ b/drivers/net/meth.h
@@ -127,7 +127,7 @@ typedef struct rx_packet {
#define METH_ACCEPT_MY 0 /* 00: Accept PHY address only */
#define METH_ACCEPT_MCAST 0x20 /* 01: Accept physical, broadcast, and multicast filter matches only */
#define METH_ACCEPT_AMCAST 0x40 /* 10: Accept physical, broadcast, and all multicast packets */
-#define METH_PROMISC 0x60 /* 11: Promiscious mode */
+#define METH_PROMISC 0x60 /* 11: Promiscuous mode */
#define METH_PHY_LINK_FAIL BIT(7) /* 0: Link failure detection disabled, 1: Hardware scans for link failure in PHY */
diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c
index 651c269..c263c91 100644
--- a/drivers/net/mv643xx_eth.c
+++ b/drivers/net/mv643xx_eth.c
@@ -535,7 +535,7 @@ struct mv643xx_private {
int rx_resource_err; /* Rx ring resource error flag */
- /* Tx/Rx rings managment indexes fields. For driver use */
+ /* Tx/Rx rings management indexes fields. For driver use */
/* Next available and first returning Rx resource */
int rx_curr_desc_q, rx_used_desc_q;
@@ -757,7 +757,7 @@ static void mv643xx_eth_update_mac_address(struct net_device *dev)
/*
* mv643xx_eth_set_rx_mode
*
- * Change from promiscuos to regular rx mode
+ * Change from promiscuous to regular rx mode
*
* Input : pointer to ethernet interface network device structure
* Output : N/A
diff --git a/drivers/net/netxen/netxen_nic_hw.h b/drivers/net/netxen/netxen_nic_hw.h
index 245bf13..236160a 100644
--- a/drivers/net/netxen/netxen_nic_hw.h
+++ b/drivers/net/netxen/netxen_nic_hw.h
@@ -429,7 +429,7 @@ typedef enum {
#define netxen_get_niu_enable_ge(config_word) \
_netxen_crb_get_bit(config_word, 1)
-/* Promiscous mode options (GbE mode only) */
+/* Promiscuous mode options (GbE mode only) */
typedef enum {
NETXEN_NIU_PROMISC_MODE = 0,
NETXEN_NIU_NON_PROMISC_MODE
diff --git a/drivers/net/ppp_generic.c b/drivers/net/ppp_generic.c
index 4f69037..9e1890f 100644
--- a/drivers/net/ppp_generic.c
+++ b/drivers/net/ppp_generic.c
@@ -2368,7 +2368,7 @@ find_compressor(int type)
}
/*
- * Miscelleneous stuff.
+ * Miscellaneous stuff.
*/
static void
diff --git a/drivers/net/ps3_gelic_net.c b/drivers/net/ps3_gelic_net.c
index 0a42bf5..5efc5b4 100644
--- a/drivers/net/ps3_gelic_net.c
+++ b/drivers/net/ps3_gelic_net.c
@@ -1271,7 +1271,7 @@ static struct ethtool_ops gelic_net_ethtool_ops = {
/**
* gelic_net_tx_timeout_task - task scheduled by the watchdog timeout
* function (to be called not under interrupt status)
- * @work: work is context of tx timout task
+ * @work: work is context of tx timeout task
*
* called as task when tx hangs, resets interface (if interface is up)
*/
diff --git a/drivers/net/qla3xxx.c b/drivers/net/qla3xxx.c
index a579111..da85b7f 100644
--- a/drivers/net/qla3xxx.c
+++ b/drivers/net/qla3xxx.c
@@ -3691,7 +3691,7 @@ static int ql_adapter_up(struct ql3_adapter *qdev)
ql_sem_unlock(qdev, QL_DRVR_SEM_MASK);
} else {
printk(KERN_ERR PFX
- "%s: Could not aquire driver lock.\n",
+ "%s: Could not acquire driver lock.\n",
ndev->name);
goto err_lock;
}
diff --git a/drivers/net/s2io.h b/drivers/net/s2io.h
index cc1797a..63d45d4 100644
--- a/drivers/net/s2io.h
+++ b/drivers/net/s2io.h
@@ -740,7 +740,7 @@ struct mac_info {
u16 mc_pause_threshold_q0q3;
u16 mc_pause_threshold_q4q7;
- void *stats_mem; /* orignal pointer to allocated mem */
+ void *stats_mem; /* original pointer to allocated mem */
dma_addr_t stats_mem_phy; /* Physical address of the stat block */
u32 stats_mem_sz;
struct stat_block *stats_info; /* Logical address of the stat block */
diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c
index 7200883..ff559e4 100644
--- a/drivers/net/sis190.c
+++ b/drivers/net/sis190.c
@@ -102,7 +102,7 @@ enum sis190_registers {
IntrStatus = 0x20,
IntrMask = 0x24,
IntrControl = 0x28,
- IntrTimer = 0x2c, // unused (Interupt Timer)
+ IntrTimer = 0x2c, // unused (Interrupt Timer)
PMControl = 0x30, // unused (Power Mgmt Control/Status)
rsv2 = 0x34, // reserved
ROMControl = 0x38,
diff --git a/drivers/net/sk98lin/skgepnmi.c b/drivers/net/sk98lin/skgepnmi.c
index b36dd9a..c761ff7 100644
--- a/drivers/net/sk98lin/skgepnmi.c
+++ b/drivers/net/sk98lin/skgepnmi.c
@@ -356,7 +356,7 @@ int Level) /* Initialization level */
unsigned int PortMax; /* Number of ports */
unsigned int PortIndex; /* Current port index in loop */
SK_U16 Val16; /* Multiple purpose 16 bit variable */
- SK_U8 Val8; /* Mulitple purpose 8 bit variable */
+ SK_U8 Val8; /* Multiple purpose 8 bit variable */
SK_EVPARA EventParam; /* Event struct for timer event */
SK_PNMI_VCT *pVctBackupData;
diff --git a/drivers/net/sk98lin/skxmac2.c b/drivers/net/sk98lin/skxmac2.c
index b4e7502..3994289 100644
--- a/drivers/net/sk98lin/skxmac2.c
+++ b/drivers/net/sk98lin/skxmac2.c
@@ -3891,7 +3891,7 @@ int SkXmOverflowStatus(
SK_AC *pAC, /* adapter context */
SK_IOC IoC, /* IO context */
unsigned int Port, /* Port Index (MAC_1 + n) */
-SK_U16 IStatus, /* Interupt Status from MAC */
+SK_U16 IStatus, /* Interrupt Status from MAC */
SK_U64 SK_FAR *pStatus) /* ptr for return overflow status value */
{
SK_U64 Status; /* Overflow status */
@@ -4036,7 +4036,7 @@ int SkGmOverflowStatus(
SK_AC *pAC, /* adapter context */
SK_IOC IoC, /* IO context */
unsigned int Port, /* Port Index (MAC_1 + n) */
-SK_U16 IStatus, /* Interupt Status from MAC */
+SK_U16 IStatus, /* Interrupt Status from MAC */
SK_U64 SK_FAR *pStatus) /* ptr for return overflow status value */
{
SK_U64 Status; /* Overflow status */
diff --git a/drivers/net/skfp/ess.c b/drivers/net/skfp/ess.c
index 62b0132..889f987 100644
--- a/drivers/net/skfp/ess.c
+++ b/drivers/net/skfp/ess.c
@@ -598,7 +598,7 @@ static void ess_send_alc_req(struct s_smc *smc)
req->cmd.sba_cmd = REQUEST_ALLOCATION ;
/*
- * set the parameter type and parameter lenght of all used
+ * set the parameter type and parameter length of all used
* parameters
*/
diff --git a/drivers/net/skfp/fplustm.c b/drivers/net/skfp/fplustm.c
index a45205d..b27a895 100644
--- a/drivers/net/skfp/fplustm.c
+++ b/drivers/net/skfp/fplustm.c
@@ -398,7 +398,7 @@ static void copy_tx_mac(struct s_smc *smc, u_long td, struct fddi_mac *mac,
/* u_long td; transmit descriptor */
/* struct fddi_mac *mac; mac frame pointer */
/* unsigned off; start address within buffer memory */
-/* int len ; lenght of the frame including the FC */
+/* int len ; length of the frame including the FC */
{
int i ;
u_int *p ;
@@ -1262,8 +1262,8 @@ Function DOWNCALL/INTERN (SMT, fplustm.c)
Para mode = 1 RX_ENABLE_ALLMULTI enable all multicasts
2 RX_DISABLE_ALLMULTI disable "enable all multicasts"
- 3 RX_ENABLE_PROMISC enable promiscous
- 4 RX_DISABLE_PROMISC disable promiscous
+ 3 RX_ENABLE_PROMISC enable promiscuous
+ 4 RX_DISABLE_PROMISC disable promiscuous
5 RX_ENABLE_NSA enable reception of NSA frames
6 RX_DISABLE_NSA disable reception of NSA frames
diff --git a/drivers/net/skfp/h/fplustm.h b/drivers/net/skfp/h/fplustm.h
index 98bbf65..586f055 100644
--- a/drivers/net/skfp/h/fplustm.h
+++ b/drivers/net/skfp/h/fplustm.h
@@ -237,8 +237,8 @@ struct s_smt_fp {
*/
#define RX_ENABLE_ALLMULTI 1 /* enable all multicasts */
#define RX_DISABLE_ALLMULTI 2 /* disable "enable all multicasts" */
-#define RX_ENABLE_PROMISC 3 /* enable promiscous */
-#define RX_DISABLE_PROMISC 4 /* disable promiscous */
+#define RX_ENABLE_PROMISC 3 /* enable promiscuous */
+#define RX_DISABLE_PROMISC 4 /* disable promiscuous */
#define RX_ENABLE_NSA 5 /* enable reception of NSA frames */
#define RX_DISABLE_NSA 6 /* disable reception of NSA frames */
diff --git a/drivers/net/skfp/h/smt.h b/drivers/net/skfp/h/smt.h
index 1ff5899..2976757 100644
--- a/drivers/net/skfp/h/smt.h
+++ b/drivers/net/skfp/h/smt.h
@@ -413,7 +413,7 @@ struct smt_p_reason {
#define SMT_RDF_SUCCESS 0x00000003 /* success (PMF) */
#define SMT_RDF_BADSET 0x00000004 /* bad set count (PMF) */
#define SMT_RDF_ILLEGAL 0x00000005 /* read only (PMF) */
-#define SMT_RDF_NOPARAM 0x6 /* paramter not supported (PMF) */
+#define SMT_RDF_NOPARAM 0x6 /* parameter not supported (PMF) */
#define SMT_RDF_RANGE 0x8 /* out of range */
#define SMT_RDF_AUTHOR 0x9 /* not autohorized */
#define SMT_RDF_LENGTH 0x0a /* length error */
diff --git a/drivers/net/skfp/h/supern_2.h b/drivers/net/skfp/h/supern_2.h
index 5ba0b83..1074f96 100644
--- a/drivers/net/skfp/h/supern_2.h
+++ b/drivers/net/skfp/h/supern_2.h
@@ -386,7 +386,7 @@ struct tx_queue {
#define FM_MDISRCV (4<<8) /* disable receive function */
#define FM_MRES0 (5<<8) /* reserve */
#define FM_MLIMPROM (6<<8) /* limited-promiscuous mode */
-#define FM_MPROMISCOUS (7<<8) /* address detection : promiscous */
+#define FM_MPROMISCOUS (7<<8) /* address detection : promiscuous */
#define FM_SELSA 0x0800 /* select-short-address bit */
diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c
index 76cc1d3..648b904 100644
--- a/drivers/net/smc911x.c
+++ b/drivers/net/smc911x.c
@@ -466,7 +466,7 @@ static inline void smc911x_rcv(struct net_device *dev)
/* Align IP header to 32 bits
* Note that the device is configured to add a 2
* byte padding to the packet start, so we really
- * want to write to the orignal data pointer */
+ * want to write to the original data pointer */
data = skb->data;
skb_reserve(skb, 2);
skb_put(skb,pkt_len-4);
diff --git a/drivers/net/spider_net.c b/drivers/net/spider_net.c
index bccae7e..7a7f5cd 100644
--- a/drivers/net/spider_net.c
+++ b/drivers/net/spider_net.c
@@ -1826,7 +1826,7 @@ spider_net_enable_card(struct spider_net_card *card)
spider_net_write_reg(card, SPIDER_NET_ECMODE, SPIDER_NET_ECMODE_VALUE);
- /* set chain tail adress for RX chains and
+ /* set chain tail address for RX chains and
* enable DMA */
spider_net_enable_rxchtails(card);
spider_net_enable_rxdmac(card);
diff --git a/drivers/net/sunbmac.h b/drivers/net/sunbmac.h
index b563d3c..681442b 100644
--- a/drivers/net/sunbmac.h
+++ b/drivers/net/sunbmac.h
@@ -185,7 +185,7 @@
#define BIGMAC_RXCFG_ENABLE 0x00000001 /* Enable the receiver */
#define BIGMAC_RXCFG_FIFO 0x0000000e /* Default rx fthresh... */
#define BIGMAC_RXCFG_PSTRIP 0x00000020 /* Pad byte strip enable */
-#define BIGMAC_RXCFG_PMISC 0x00000040 /* Enable promiscous mode */
+#define BIGMAC_RXCFG_PMISC 0x00000040 /* Enable promiscuous mode */
#define BIGMAC_RXCFG_DERR 0x00000080 /* Disable error checking */
#define BIGMAC_RXCFG_DCRCS 0x00000100 /* Disable CRC stripping */
#define BIGMAC_RXCFG_ME 0x00000200 /* Receive packets addressed to me */
diff --git a/drivers/net/sungem.c b/drivers/net/sungem.c
index 6887214..097a065 100644
--- a/drivers/net/sungem.c
+++ b/drivers/net/sungem.c
@@ -780,7 +780,7 @@ static int gem_rx(struct gem *gp, int work_to_do)
break;
/* When writing back RX descriptor, GEM writes status
- * then buffer address, possibly in seperate transactions.
+ * then buffer address, possibly in separate transactions.
* If we don't wait for the chip to write both, we could
* post a new buffer to this descriptor then have GEM spam
* on the buffer address. We sync on the RX completion
diff --git a/drivers/net/sunhme.h b/drivers/net/sunhme.h
index 90f446d..68bf4e1 100644
--- a/drivers/net/sunhme.h
+++ b/drivers/net/sunhme.h
@@ -223,7 +223,7 @@
/* BigMac receive config register. */
#define BIGMAC_RXCFG_ENABLE 0x00000001 /* Enable the receiver */
#define BIGMAC_RXCFG_PSTRIP 0x00000020 /* Pad byte strip enable */
-#define BIGMAC_RXCFG_PMISC 0x00000040 /* Enable promiscous mode */
+#define BIGMAC_RXCFG_PMISC 0x00000040 /* Enable promiscuous mode */
#define BIGMAC_RXCFG_DERR 0x00000080 /* Disable error checking */
#define BIGMAC_RXCFG_DCRCS 0x00000100 /* Disable CRC stripping */
#define BIGMAC_RXCFG_REJME 0x00000200 /* Reject packets addressed to me */
diff --git a/drivers/net/tc35815.c b/drivers/net/tc35815.c
index d887c05..0fbf96d 100644
--- a/drivers/net/tc35815.c
+++ b/drivers/net/tc35815.c
@@ -136,7 +136,7 @@ struct tc35815_regs {
#define DMA_RxAlign_2 0x00800000
#define DMA_RxAlign_3 0x00c00000
#define DMA_M66EnStat 0x00080000 /* 1:66MHz Enable State */
-#define DMA_IntMask 0x00040000 /* 1:Interupt mask */
+#define DMA_IntMask 0x00040000 /* 1:Interrupt mask */
#define DMA_SWIntReq 0x00020000 /* 1:Software Interrupt request */
#define DMA_TxWakeUp 0x00010000 /* 1:Transmit Wake Up */
#define DMA_RxBigE 0x00008000 /* 1:Receive Big Endian */
@@ -281,7 +281,7 @@ struct tc35815_regs {
#define Int_IntMacTx 0x00000001 /* 1:Tx controller & Clear */
/* MD_CA bit asign --------------------------------------------------------- */
-#define MD_CA_PreSup 0x00001000 /* 1:Preamble Supress */
+#define MD_CA_PreSup 0x00001000 /* 1:Preamble Suppress */
#define MD_CA_Busy 0x00000800 /* 1:Busy (Start Operation) */
#define MD_CA_Wr 0x00000400 /* 1:Write 0:Read */
diff --git a/drivers/net/tehuti.c b/drivers/net/tehuti.c
index 21230c9..3ed1973 100644
--- a/drivers/net/tehuti.c
+++ b/drivers/net/tehuti.c
@@ -276,7 +276,7 @@ static irqreturn_t bdx_isr_napi(int irq, void *dev)
* currently intrs are disabled (since we read ISR),
* and we have failed to register next poll.
* so we read the regs to trigger chip
- * and allow further interupts. */
+ * and allow further interrupts. */
READ_REG(priv, regTXF_WPTR_0);
READ_REG(priv, regRXD_WPTR_0);
}
diff --git a/drivers/net/tehuti.h b/drivers/net/tehuti.h
index efd170f..992efa6 100644
--- a/drivers/net/tehuti.h
+++ b/drivers/net/tehuti.h
@@ -510,7 +510,7 @@ struct txd_desc {
#define GMAC_RX_FILTER_ACRC 0x0010 /* accept crc error */
#define GMAC_RX_FILTER_AM 0x0008 /* accept multicast */
#define GMAC_RX_FILTER_AB 0x0004 /* accept broadcast */
-#define GMAC_RX_FILTER_PRM 0x0001 /* [0:1] promiscous mode */
+#define GMAC_RX_FILTER_PRM 0x0001 /* [0:1] promiscuous mode */
#define MAX_FRAME_AB_VAL 0x3fff /* 13:0 */
diff --git a/drivers/net/tokenring/3c359.c b/drivers/net/tokenring/3c359.c
index 5d31519..9d7a0c9 100644
--- a/drivers/net/tokenring/3c359.c
+++ b/drivers/net/tokenring/3c359.c
@@ -75,7 +75,7 @@ static char version[] __devinitdata =
MODULE_AUTHOR("Mike Phillips <mikep@linuxtr.net>") ;
MODULE_DESCRIPTION("3Com 3C359 Velocity XL Token Ring Adapter Driver \n") ;
-/* Module paramters */
+/* Module parameters */
/* Ring Speed 0,4,16
* 0 = Autosense
diff --git a/drivers/net/tokenring/lanstreamer.c b/drivers/net/tokenring/lanstreamer.c
index 47d84cd..21c4f3c 100644
--- a/drivers/net/tokenring/lanstreamer.c
+++ b/drivers/net/tokenring/lanstreamer.c
@@ -170,7 +170,7 @@ static char *open_min_error[] = {
"Monitor Contention failer for RPL", "FDX Protocol Error"
};
-/* Module paramters */
+/* Module parameters */
/* Ring Speed 0,4,16
* 0 = Autosense
diff --git a/drivers/net/tokenring/olympic.c b/drivers/net/tokenring/olympic.c
index 74c1f0f..b1178f1 100644
--- a/drivers/net/tokenring/olympic.c
+++ b/drivers/net/tokenring/olympic.c
@@ -132,7 +132,7 @@ static char *open_min_error[] = {"No error", "Function Failure", "Signal Lost",
"Reserved", "Reserved", "No Monitor Detected for RPL",
"Monitor Contention failer for RPL", "FDX Protocol Error"};
-/* Module paramters */
+/* Module parameters */
MODULE_AUTHOR("Mike Phillips <mikep@linuxtr.net>") ;
MODULE_DESCRIPTION("Olympic PCI/Cardbus Chipset Driver") ;
diff --git a/drivers/net/tokenring/smctr.c b/drivers/net/tokenring/smctr.c
index 93da3a3..4238a61 100644
--- a/drivers/net/tokenring/smctr.c
+++ b/drivers/net/tokenring/smctr.c
@@ -2426,7 +2426,7 @@ static irqreturn_t smctr_interrupt(int irq, void *dev_id)
break ;
/* Type 0x0E - TRC Initialization Sequence Interrupt
- * Subtype -- 00-FF Initializatin sequence complete
+ * Subtype -- 00-FF Initialization sequence complete
*/
case ISB_IMC_TRC_INTRNL_TST_STATUS:
tp->status = INITIALIZED;
@@ -3055,8 +3055,8 @@ static int smctr_load_node_addr(struct net_device *dev)
* disabled.!?
*
* NOTE 2: If the monitor_state is MS_BEACON_TEST_STATE and the receive_mask
- * has any multi-cast or promiscous bits set, the receive_mask needs to
- * be changed to clear the multi-cast or promiscous mode bits, the lobe_test
+ * has any multi-cast or promiscuous bits set, the receive_mask needs to
+ * be changed to clear the multi-cast or promiscuous mode bits, the lobe_test
* run, and then the receive mask set back to its original value if the test
* is successful.
*/
diff --git a/drivers/net/tokenring/tms380tr.c b/drivers/net/tokenring/tms380tr.c
index d5fa36d..b15435d 100644
--- a/drivers/net/tokenring/tms380tr.c
+++ b/drivers/net/tokenring/tms380tr.c
@@ -48,7 +48,7 @@
* 25-Sep-99 AF Uped TPL_NUM from 3 to 9
* Removed extraneous 'No free TPL'
* 22-Dec-99 AF Added Madge PCI Mk2 support and generalized
- * parts of the initilization procedure.
+ * parts of the initialization procedure.
* 30-Dec-99 AF Turned tms380tr into a library ala 8390.
* Madge support is provided in the abyss module
* Generic PCI support is in the tmspci module.
diff --git a/drivers/net/tokenring/tms380tr.h b/drivers/net/tokenring/tms380tr.h
index 7daf74e..1cbb8b8 100644
--- a/drivers/net/tokenring/tms380tr.h
+++ b/drivers/net/tokenring/tms380tr.h
@@ -441,7 +441,7 @@ typedef struct {
#define PASS_FIRST_BUF_ONLY 0x0100 /* Passes only first internal buffer
* of each received frame; FrameSize
* of RPLs must contain internal
- * BUFFER_SIZE bits for promiscous mode.
+ * BUFFER_SIZE bits for promiscuous mode.
*/
#define ENABLE_FULL_DUPLEX_SELECTION 0x2000
/* Enable the use of full-duplex
diff --git a/drivers/net/tulip/xircom_cb.c b/drivers/net/tulip/xircom_cb.c
index 70befe3..5dad012 100644
--- a/drivers/net/tulip/xircom_cb.c
+++ b/drivers/net/tulip/xircom_cb.c
@@ -646,7 +646,7 @@ static void setup_descriptors(struct xircom_private *card)
}
wmb();
- /* wite the transmit descriptor ring to the card */
+ /* write the transmit descriptor ring to the card */
address = (unsigned long) card->tx_dma_handle;
val =cpu_to_le32(address);
outl(val, card->io_port + CSR4); /* xmit descr list address */
diff --git a/drivers/net/tun.c b/drivers/net/tun.c
index 1f76446..fc9eada 100644
--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -142,7 +142,7 @@ add_multi(u32* filter, const u8* addr)
filter[bit_nr >> 5] |= 1 << (bit_nr & 31);
}
-/** Remove the specified Ethernet addres from this multicast filter. */
+/** Remove the specified Ethernet address from this multicast filter. */
static void
del_multi(u32* filter, const u8* addr)
{
@@ -399,7 +399,7 @@ static ssize_t tun_chr_aio_read(struct kiocb *iocb, const struct iovec *iv,
* - the packet is addressed to us.
* - the packet is broadcast.
* - the packet is multicast and
- * - we are multicast promiscous.
+ * - we are multicast promiscuous.
* - we belong to the multicast group.
*/
skb_copy_from_linear_data(skb, addr, min_t(size_t, sizeof addr,
diff --git a/drivers/net/ucc_geth_ethtool.c b/drivers/net/ucc_geth_ethtool.c
index 9a9622c..f8d319b 100644
--- a/drivers/net/ucc_geth_ethtool.c
+++ b/drivers/net/ucc_geth_ethtool.c
@@ -7,7 +7,7 @@
*
* Limitation:
* Can only get/set setttings of the first queue.
- * Need to re-open the interface manually after changing some paramters.
+ * Need to re-open the interface manually after changing some parameters.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
diff --git a/drivers/net/ucc_geth_mii.c b/drivers/net/ucc_geth_mii.c
index df884f0..7c0d4a8 100644
--- a/drivers/net/ucc_geth_mii.c
+++ b/drivers/net/ucc_geth_mii.c
@@ -63,11 +63,11 @@ int uec_mdio_write(struct mii_bus *bus, int mii_id, int regnum, u16 value)
{
struct ucc_mii_mng __iomem *regs = (void __iomem *)bus->priv;
- /* Setting up the MII Mangement Address Register */
+ /* Setting up the MII Management Address Register */
out_be32(®s->miimadd,
(mii_id << MIIMADD_PHY_ADDRESS_SHIFT) | regnum);
- /* Setting up the MII Mangement Control Register with the value */
+ /* Setting up the MII Management Control Register with the value */
out_be32(®s->miimcon, value);
/* Wait till MII management write is complete */
@@ -85,7 +85,7 @@ int uec_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
struct ucc_mii_mng __iomem *regs = (void __iomem *)bus->priv;
u16 value;
- /* Setting up the MII Mangement Address Register */
+ /* Setting up the MII Management Address Register */
out_be32(®s->miimadd,
(mii_id << MIIMADD_PHY_ADDRESS_SHIFT) | regnum);
diff --git a/drivers/net/wan/cycx_drv.c b/drivers/net/wan/cycx_drv.c
index d347d59..d14e667 100644
--- a/drivers/net/wan/cycx_drv.c
+++ b/drivers/net/wan/cycx_drv.c
@@ -322,7 +322,7 @@ static int cycx_data_boot(void __iomem *addr, u8 *code, u32 len)
void __iomem *pt_boot_cmd = addr + CMD_OFFSET;
u32 i;
- /* boot buffer lenght */
+ /* boot buffer length */
writew(CFM_LOAD_BUFSZ, pt_boot_cmd + sizeof(u16));
writew(GEN_DEFPAR, pt_boot_cmd);
@@ -353,7 +353,7 @@ static int cycx_code_boot(void __iomem *addr, u8 *code, u32 len)
void __iomem *pt_boot_cmd = addr + CMD_OFFSET;
u32 i;
- /* boot buffer lenght */
+ /* boot buffer length */
writew(CFM_LOAD_BUFSZ, pt_boot_cmd + sizeof(u16));
writew(GEN_DEFPAR, pt_boot_cmd);
diff --git a/drivers/net/wan/sbni.c b/drivers/net/wan/sbni.c
index 2e8b5c2..74f87df 100644
--- a/drivers/net/wan/sbni.c
+++ b/drivers/net/wan/sbni.c
@@ -1472,7 +1472,7 @@ sbni_get_stats( struct net_device *dev )
static void
set_multicast_list( struct net_device *dev )
{
- return; /* sbni always operate in promiscuos mode */
+ return; /* sbni always operate in promiscuous mode */
}
diff --git a/drivers/net/wireless/atmel.c b/drivers/net/wireless/atmel.c
index 059ce3f..60dfdd9 100644
--- a/drivers/net/wireless/atmel.c
+++ b/drivers/net/wireless/atmel.c
@@ -3278,7 +3278,7 @@ static void atmel_smooth_qual(struct atmel_private *priv)
priv->wstats.qual.updated &= ~IW_QUAL_QUAL_INVALID;
}
-/* deals with incoming managment frames. */
+/* deals with incoming management frames. */
static void atmel_management_frame(struct atmel_private *priv,
struct ieee80211_hdr_4addr *header,
u16 frame_len, u8 rssi)
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_debugfs.h b/drivers/net/wireless/bcm43xx/bcm43xx_debugfs.h
index a40d1af..edf7d8f 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx_debugfs.h
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_debugfs.h
@@ -28,7 +28,7 @@ struct bcm43xx_dfsentry {
struct bcm43xx_xmitstatus *xmitstatus_buffer;
int xmitstatus_ptr;
int xmitstatus_cnt;
- /* We need a seperate buffer while printing to avoid
+ /* We need a separate buffer while printing to avoid
* concurrency issues. (New xmitstatus can arrive
* while we are printing).
*/
diff --git a/drivers/net/wireless/ipw2200.c b/drivers/net/wireless/ipw2200.c
index 54f44e5..e24382f 100644
--- a/drivers/net/wireless/ipw2200.c
+++ b/drivers/net/wireless/ipw2200.c
@@ -1144,7 +1144,7 @@ static void ipw_led_shutdown(struct ipw_priv *priv)
/*
* The following adds a new attribute to the sysfs representation
* of this device driver (i.e. a new file in /sys/bus/pci/drivers/ipw/)
- * used for controling the debug level.
+ * used for controlling the debug level.
*
* See the level definitions in ipw for details.
*/
diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c
index 891f90d..e242647 100644
--- a/drivers/net/wireless/iwlwifi/iwl-4965.c
+++ b/drivers/net/wireless/iwlwifi/iwl-4965.c
@@ -4051,7 +4051,7 @@ static int iwl4965_tx_status_reply_compressed_ba(struct iwl_priv *priv,
agg->wait_for_ba = 0;
IWL_DEBUG_TX_REPLY("BA %d %d\n", agg->start_idx, ba_resp->ba_seq_ctl);
sh = agg->start_idx - SEQ_TO_INDEX(ba_seq_ctl>>4);
- if (sh < 0) /* tbw something is wrong with indeces */
+ if (sh < 0) /* tbw something is wrong with indices */
sh += 0x100;
/* don't use 64 bits for now */
diff --git a/drivers/net/wireless/libertas/cmd.c b/drivers/net/wireless/libertas/cmd.c
index be5cfd8..31ee4f6 100644
--- a/drivers/net/wireless/libertas/cmd.c
+++ b/drivers/net/wireless/libertas/cmd.c
@@ -1120,7 +1120,7 @@ int libertas_set_mac_packet_filter(wlan_private * priv)
* @param cmd_action command action: GET or SET
* @param wait_option wait option: wait response or not
* @param cmd_oid cmd oid: treated as sub command
- * @param pdata_buf A pointer to informaion buffer
+ * @param pdata_buf A pointer to information buffer
* @return 0 or -1
*/
int libertas_prepare_and_send_command(wlan_private * priv,
@@ -1606,7 +1606,7 @@ static void cleanup_cmdnode(struct cmd_ctrl_node *ptempnode)
* @param ptempnode A pointer to cmd_ctrl_node structure
* @param cmd_oid cmd oid: treated as sub command
* @param wait_option wait option: wait response or not
- * @param pdata_buf A pointer to informaion buffer
+ * @param pdata_buf A pointer to information buffer
* @return 0 or -1
*/
void libertas_set_cmd_ctrl_node(wlan_private * priv,
diff --git a/drivers/net/wireless/libertas/scan.c b/drivers/net/wireless/libertas/scan.c
index ad1e67d..537b36c 100644
--- a/drivers/net/wireless/libertas/scan.c
+++ b/drivers/net/wireless/libertas/scan.c
@@ -443,7 +443,7 @@ wlan_scan_setup_scan_config(wlan_private * priv,
ptlvpos = pscancfgout->tlvbuffer;
/*
- * Set the initial scan paramters for progressive scanning. If a specific
+ * Set the initial scan parameters for progressive scanning. If a specific
* BSSID or SSID is used, the number of channels in the scan command
* will be increased to the absolute maximum
*/
@@ -1679,7 +1679,7 @@ int libertas_get_scan(struct net_device *dev, struct iw_request_info *info,
*
* Called from libertas_prepare_and_send_command() in cmd.c
*
- * Sends a fixed lenght data part (specifying the BSS type and BSSID filters)
+ * Sends a fixed length data part (specifying the BSS type and BSSID filters)
* as well as a variable number/length of TLVs to the firmware.
*
* @param priv A pointer to wlan_private structure
diff --git a/drivers/net/wireless/netwave_cs.c b/drivers/net/wireless/netwave_cs.c
index d2fa079..c4b649e 100644
--- a/drivers/net/wireless/netwave_cs.c
+++ b/drivers/net/wireless/netwave_cs.c
@@ -1408,7 +1408,7 @@ static void set_multicast_list(struct net_device *dev)
/* Multicast Mode */
rcvMode = rxConfRxEna + rxConfAMP + rxConfBcast;
} else if (dev->flags & IFF_PROMISC) {
- /* Promiscous mode */
+ /* Promiscuous mode */
rcvMode = rxConfRxEna + rxConfPro + rxConfAMP + rxConfBcast;
} else {
/* Normal mode */
diff --git a/drivers/net/wireless/orinoco.h b/drivers/net/wireless/orinoco.h
index 4720fb2..703a4cf 100644
--- a/drivers/net/wireless/orinoco.h
+++ b/drivers/net/wireless/orinoco.h
@@ -108,7 +108,7 @@ struct orinoco_private {
int scan_inprogress; /* Scan pending... */
u32 scan_mode; /* Type of scan done */
char * scan_result; /* Result of previous scan */
- int scan_len; /* Lenght of result */
+ int scan_len; /* Length of result */
};
#ifdef ORINOCO_DEBUG
diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c
index f87fe10..24f9066 100644
--- a/drivers/net/wireless/ray_cs.c
+++ b/drivers/net/wireless/ray_cs.c
@@ -129,7 +129,7 @@ static void ray_reset(struct net_device *dev);
static void ray_update_parm(struct net_device *dev, UCHAR objid, UCHAR *value, int len);
static void verify_dl_startup(u_long);
-/* Prototypes for interrpt time functions **********************************/
+/* Prototypes for interrupt time functions **********************************/
static irqreturn_t ray_interrupt (int reg, void *dev_id);
static void clear_interrupt(ray_dev_t *local);
static void rx_deauthenticate(ray_dev_t *local, struct rcs __iomem *prcs,
diff --git a/drivers/net/wireless/rt2x00/rt2x00reg.h b/drivers/net/wireless/rt2x00/rt2x00reg.h
index 8384212..fe9011d 100644
--- a/drivers/net/wireless/rt2x00/rt2x00reg.h
+++ b/drivers/net/wireless/rt2x00/rt2x00reg.h
@@ -230,7 +230,7 @@ static inline u8 rt2x00_get_field8(const u8 reg,
* corresponds with the TX register format for the current device.
* 4 - plcp, 802.11b rates are device specific,
* 802.11g rates are set according to the ieee802.11a-1999 p.14.
- * The bit to enable preamble is set in a seperate define.
+ * The bit to enable preamble is set in a separate define.
*/
#define DEV_RATE FIELD32(0x000007ff)
#define DEV_PREAMBLE FIELD32(0x00000800)
diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.h b/drivers/net/wireless/rt2x00/rt2x00usb.h
index 2681abe..b76881f 100644
--- a/drivers/net/wireless/rt2x00/rt2x00usb.h
+++ b/drivers/net/wireless/rt2x00/rt2x00usb.h
@@ -135,13 +135,13 @@ static inline int rt2x00usb_vendor_request_sw(const struct rt2x00_dev
* kmalloc for correct handling inside the kernel USB layer.
*/
static inline int rt2x00usb_eeprom_read(const struct rt2x00_dev *rt2x00dev,
- __le16 *eeprom, const u16 lenght)
+ __le16 *eeprom, const u16 length)
{
- int timeout = REGISTER_TIMEOUT * (lenght / sizeof(u16));
+ int timeout = REGISTER_TIMEOUT * (length / sizeof(u16));
return rt2x00usb_vendor_request(rt2x00dev, USB_EEPROM_READ,
USB_VENDOR_REQUEST_IN, 0x0000,
- 0x0000, eeprom, lenght, timeout);
+ 0x0000, eeprom, length, timeout);
}
/*
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index c0671c2..d1468a1 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -833,7 +833,7 @@ static int rt73usb_load_firmware(struct rt2x00_dev *rt2x00dev, void *data,
/*
* Write firmware to device.
- * We setup a seperate cache for this action,
+ * We setup a separate cache for this action,
* since we are going to write larger chunks of data
* then normally used cache size.
*/
diff --git a/drivers/net/wireless/wavelan_cs.c b/drivers/net/wireless/wavelan_cs.c
index 577c647..5d28105 100644
--- a/drivers/net/wireless/wavelan_cs.c
+++ b/drivers/net/wireless/wavelan_cs.c
@@ -159,7 +159,7 @@ psa_read(struct net_device * dev,
/*------------------------------------------------------------------*/
/*
- * Write the Paramter Storage Area to the WaveLAN card's memory
+ * Write the Parameter Storage Area to the WaveLAN card's memory
*/
static void
psa_write(struct net_device * dev,
diff --git a/drivers/net/wireless/zd1211rw/zd_chip.h b/drivers/net/wireless/zd1211rw/zd_chip.h
index 8009b70..301315a 100644
--- a/drivers/net/wireless/zd1211rw/zd_chip.h
+++ b/drivers/net/wireless/zd1211rw/zd_chip.h
@@ -620,8 +620,8 @@ enum {
#define E2P_PWR_INT_GUARD 8
#define E2P_CHANNEL_COUNT 14
-/* If you compare this addresses with the ZYDAS orignal driver, please notify
- * that we use word mapping for the EEPROM.
+/* If you compare these addresses with the ZYDAS original driver,
+ * please notice that we use word mapping for the EEPROM.
*/
/*
diff --git a/drivers/net/yellowfin.c b/drivers/net/yellowfin.c
index 87f002a..cb6e978 100644
--- a/drivers/net/yellowfin.c
+++ b/drivers/net/yellowfin.c
@@ -533,7 +533,7 @@ static int __devinit read_eeprom(void __iomem *ioaddr, int location)
return ioread8(ioaddr + EERead);
}
-/* MII Managemen Data I/O accesses.
+/* MII Management Data I/O accesses.
These routines assume the MDIO controller is idle, and do not exit until
the command is finished. */
--
1.5.3.7.949.g2221a6
^ permalink raw reply related [flat|nested] 34+ messages in thread* Re: [PATCH] drivers/net/: Spelling fixes
2007-12-17 19:40 ` Joe Perches
(?)
@ 2007-12-17 19:58 ` Chris Snook
-1 siblings, 0 replies; 34+ messages in thread
From: Chris Snook @ 2007-12-17 19:58 UTC (permalink / raw)
To: Joe Perches; +Cc: Linux Kernel Mailing List, Andrew Morton, jcliburn
Joe Perches wrote:
> drivers/net/atl1/atl1_hw.c | 2 +-
> drivers/net/atl1/atl1_main.c | 2 +-
The atl1 code will be heavily reworked in the 2.6.25 merge window, so this may
cause headaches. Please remove these chunks before merging.
The spelling corrections themselves are fine, and I will ensure that the revised
driver includes them, if the comments in question are still present at all once
we're done with all the changes and cleanups.
-- Chris
^ permalink raw reply [flat|nested] 34+ messages in thread
* Re: [PATCH] drivers/net/: Spelling fixes
2007-12-17 19:40 ` Joe Perches
@ 2007-12-17 20:56 ` Stefano Brivio
-1 siblings, 0 replies; 34+ messages in thread
From: Stefano Brivio @ 2007-12-17 20:56 UTC (permalink / raw)
To: Joe Perches
Cc: Manish, Jay, David Gibson, orinoco-devel, Roskin, Corey Thomas,
linuxppc-dev, Daniel, Paul Mackerras, Peter De Shrijver, Pavel,
Rastapur Santosh, John, bonding-devel, Andy Gospodarek, Eugene,
Amit S. Kale, ipw2100-devel, ipw3945-devel, libertas-dev,
Dan Williams, Jesse Brandeburg, Lachwani, Jean Tourrilhes, Zhu,
Jeff Kirsher, Arnaldo Carvalho de Melo, Francois Romieu, Drake,
Li Yang, Jeff Garzik, Jeb Cramer, Chad Tindel, Dale, Jay Cliburn,
Samuel Ortiz, Sivakumar Subramani, Jesse Huang, Mike Phillips,
rt2400-devel, Ulrich Kunitz, Jaroslav Kysela, Chris Snook,
cbe-oss-dev, Alexander Indenbaum, Adam Fritzler, Auke Kok,
Haavard Skinnemoen, tulip-users, linux-ppp, Ramkrishna Vepa,
linux-wireless, linux-kernel, Sreenivasa Honnur, e1000-devel,
Geoff, Ronciak, orinoco-users, Yi, atl1-devel, Ron Mercer,
James Ketrenos, Andrew Morton, Sorbica Shieh, netdev,
Larry Finger
On Mon, 17 Dec 2007 11:40:08 -0800
Joe Perches <joe@perches.com> wrote:
> diff --git a/drivers/net/ucc_geth_ethtool.c b/drivers/net/ucc_geth_ethtool.c
> index 9a9622c..f8d319b 100644
> --- a/drivers/net/ucc_geth_ethtool.c
> +++ b/drivers/net/ucc_geth_ethtool.c
> @@ -7,7 +7,7 @@
> *
> * Limitation:
> * Can only get/set setttings of the first queue.
^^^
--
Ciao
Stefano
^ permalink raw reply [flat|nested] 34+ messages in thread* Re: [PATCH] drivers/net/: Spelling fixes
@ 2007-12-17 20:56 ` Stefano Brivio
0 siblings, 0 replies; 34+ messages in thread
From: Stefano Brivio @ 2007-12-17 20:56 UTC (permalink / raw)
To: Joe Perches
Cc: Manish, Surovegin, Levand, Jay, David Gibson, orinoco-devel,
Roskin, Corey Thomas, linuxppc-dev, Daniel, Paul Mackerras,
Peter De Shrijver, Pavel, Rastapur Santosh, John, bonding-devel,
Andy Gospodarek, Eugene, Amit S. Kale, ipw2100-devel,
ipw3945-devel, Masakazu Mokuno, libertas-dev, Dan Williams
On Mon, 17 Dec 2007 11:40:08 -0800
Joe Perches <joe@perches.com> wrote:
> diff --git a/drivers/net/ucc_geth_ethtool.c b/drivers/net/ucc_geth_ethtool.c
> index 9a9622c..f8d319b 100644
> --- a/drivers/net/ucc_geth_ethtool.c
> +++ b/drivers/net/ucc_geth_ethtool.c
> @@ -7,7 +7,7 @@
> *
> * Limitation:
> * Can only get/set setttings of the first queue.
^^^
--
Ciao
Stefano
-------------------------------------------------------------------------
SF.Net email is sponsored by:
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services
for just about anything Open Source.
http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace
^ permalink raw reply [flat|nested] 34+ messages in thread* Re: [PATCH] drivers/net/: Spelling fixes
2007-12-17 20:56 ` Stefano Brivio
@ 2007-12-17 21:15 ` Joe Perches
-1 siblings, 0 replies; 34+ messages in thread
From: Joe Perches @ 2007-12-17 21:15 UTC (permalink / raw)
To: Stefano Brivio
Cc: Sivakumar Subramani, netdev, Ramkrishna Vepa, linux-kernel,
linuxppc-dev, Sreenivasa Honnur, Rastapur Santosh, Andrew Morton,
Li Yang, Jeff Garzik
On Mon, 2007-12-17 at 21:56 +0100, Stefano Brivio wrote:
> On Mon, 17 Dec 2007 11:40:08 -0800
> Joe Perches <joe@perches.com> wrote:
> > diff --git a/drivers/net/ucc_geth_ethtool.c
> b/drivers/net/ucc_geth_ethtool.c
> > index 9a9622c..f8d319b 100644
> > --- a/drivers/net/ucc_geth_ethtool.c
> > +++ b/drivers/net/ucc_geth_ethtool.c
> > @@ -7,7 +7,7 @@
> > *
> > * Limitation:
> > * Can only get/set setttings of the first queue.
> ^^^
Good eyes... Unrelated to what I changed too.
cheers, Joe
Signed-off-by: Joe Perches <joe@perches.com>
---
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index 121cb10..cdfb2b0 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -6823,8 +6823,8 @@ static void do_s2io_card_down(struct s2io_nic * sp, int do_io)
while(do_io) {
/* As per the HW requirement we need to replenish the
* receive buffer to avoid the ring bump. Since there is
- * no intention of processing the Rx frame at this pointwe are
- * just settting the ownership bit of rxd in Each Rx
+ * no intention of processing the Rx frame at this point we are
+ * just setting the ownership bit of rxd in each Rx
* ring to HW and set the appropriate buffer size
* based on the ring mode
*/
diff --git a/drivers/net/ucc_geth_ethtool.c b/drivers/net/ucc_geth_ethtool.c
index f8d319b..3e50df8 100644
--- a/drivers/net/ucc_geth_ethtool.c
+++ b/drivers/net/ucc_geth_ethtool.c
@@ -6,7 +6,7 @@
* Author: Li Yang <leoli@freescale.com>
*
* Limitation:
- * Can only get/set setttings of the first queue.
+ * Can only get/set settings of the first queue.
* Need to re-open the interface manually after changing some parameters.
*
* This program is free software; you can redistribute it and/or modify it
^ permalink raw reply related [flat|nested] 34+ messages in thread* Re: [PATCH] drivers/net/: Spelling fixes
@ 2007-12-17 21:15 ` Joe Perches
0 siblings, 0 replies; 34+ messages in thread
From: Joe Perches @ 2007-12-17 21:15 UTC (permalink / raw)
To: Stefano Brivio
Cc: linux-kernel, Andrew Morton, Jeff Garzik, Li Yang,
Ramkrishna Vepa, Rastapur Santosh, Sivakumar Subramani,
Sreenivasa Honnur, linuxppc-dev, netdev
On Mon, 2007-12-17 at 21:56 +0100, Stefano Brivio wrote:
> On Mon, 17 Dec 2007 11:40:08 -0800
> Joe Perches <joe@perches.com> wrote:
> > diff --git a/drivers/net/ucc_geth_ethtool.c
> b/drivers/net/ucc_geth_ethtool.c
> > index 9a9622c..f8d319b 100644
> > --- a/drivers/net/ucc_geth_ethtool.c
> > +++ b/drivers/net/ucc_geth_ethtool.c
> > @@ -7,7 +7,7 @@
> > *
> > * Limitation:
> > * Can only get/set setttings of the first queue.
> ^^^
Good eyes... Unrelated to what I changed too.
cheers, Joe
Signed-off-by: Joe Perches <joe@perches.com>
---
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index 121cb10..cdfb2b0 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -6823,8 +6823,8 @@ static void do_s2io_card_down(struct s2io_nic * sp, int do_io)
while(do_io) {
/* As per the HW requirement we need to replenish the
* receive buffer to avoid the ring bump. Since there is
- * no intention of processing the Rx frame at this pointwe are
- * just settting the ownership bit of rxd in Each Rx
+ * no intention of processing the Rx frame at this point we are
+ * just setting the ownership bit of rxd in each Rx
* ring to HW and set the appropriate buffer size
* based on the ring mode
*/
diff --git a/drivers/net/ucc_geth_ethtool.c b/drivers/net/ucc_geth_ethtool.c
index f8d319b..3e50df8 100644
--- a/drivers/net/ucc_geth_ethtool.c
+++ b/drivers/net/ucc_geth_ethtool.c
@@ -6,7 +6,7 @@
* Author: Li Yang <leoli@freescale.com>
*
* Limitation:
- * Can only get/set setttings of the first queue.
+ * Can only get/set settings of the first queue.
* Need to re-open the interface manually after changing some parameters.
*
* This program is free software; you can redistribute it and/or modify it
^ permalink raw reply related [flat|nested] 34+ messages in thread
* [PATCH] drivers/net/: Spelling fixes
@ 2007-12-17 19:40 ` Joe Perches
0 siblings, 0 replies; 34+ messages in thread
From: Joe Perches @ 2007-12-17 19:40 UTC (permalink / raw)
To: linux-kernel
Cc: Pavel Roskin, Eugene Surovegin, Geoff Levand, David Gibson,
orinoco-devel, Yi Zhu, Jaroslav Kysela, linuxppc-dev, netdev,
Paul Mackerras, Peter De Shrijver, Rastapur Santosh,
bonding-devel, Andy Gospodarek, Amit S. Kale, ipw2100-devel,
ipw3945-devel, Masakazu Mokuno, libertas-dev, Dan Williams,
Dale Farnsworth, Jay Vosburgh, Jesse Brandeburg,
Manish Lachwani <m
Signed-off-by: Joe Perches <joe@perches.com>
---
drivers/net/82596.c | 2 +-
drivers/net/amd8111e.c | 8 ++++----
drivers/net/amd8111e.h | 2 +-
drivers/net/appletalk/ltpc.c | 2 +-
drivers/net/atl1/atl1_hw.c | 2 +-
drivers/net/atl1/atl1_main.c | 2 +-
drivers/net/bonding/bond_3ad.c | 4 ++--
drivers/net/chelsio/sge.c | 2 +-
drivers/net/chelsio/subr.c | 2 +-
drivers/net/cxgb3/t3_hw.c | 2 +-
drivers/net/e1000/e1000_hw.c | 4 ++--
drivers/net/e1000/e1000_hw.h | 2 +-
drivers/net/e1000/e1000_main.c | 2 +-
drivers/net/e1000e/netdev.c | 2 +-
drivers/net/eepro.c | 2 +-
drivers/net/ehea/ehea.h | 2 +-
drivers/net/forcedeth.c | 2 +-
drivers/net/hamachi.c | 4 ++--
drivers/net/hp100.c | 2 +-
drivers/net/hp100.h | 4 ++--
drivers/net/ibm_emac/ibm_emac.h | 2 +-
drivers/net/ibm_newemac/emac.h | 2 +-
drivers/net/ibmlana.c | 2 +-
drivers/net/ibmlana.h | 2 +-
drivers/net/ipg.c | 4 ++--
drivers/net/irda/ali-ircc.c | 6 +++---
drivers/net/irda/ali-ircc.h | 4 ++--
drivers/net/irda/donauboe.h | 2 +-
drivers/net/irda/irport.c | 4 ++--
drivers/net/irda/nsc-ircc.h | 4 ++--
drivers/net/irda/smsc-ircc2.c | 4 ++--
drivers/net/irda/via-ircc.h | 4 ++--
drivers/net/ixgbe/ixgbe_common.c | 4 ++--
drivers/net/ixgbe/ixgbe_main.c | 2 +-
drivers/net/lasi_82596.c | 2 +-
drivers/net/lib82596.c | 2 +-
drivers/net/macb.c | 2 +-
drivers/net/meth.h | 2 +-
drivers/net/mv643xx_eth.c | 4 ++--
drivers/net/netxen/netxen_nic_hw.h | 2 +-
drivers/net/ppp_generic.c | 2 +-
drivers/net/ps3_gelic_net.c | 2 +-
drivers/net/qla3xxx.c | 2 +-
drivers/net/s2io.h | 2 +-
drivers/net/sis190.c | 2 +-
drivers/net/sk98lin/skgepnmi.c | 2 +-
drivers/net/sk98lin/skxmac2.c | 4 ++--
drivers/net/skfp/ess.c | 2 +-
drivers/net/skfp/fplustm.c | 6 +++---
drivers/net/skfp/h/fplustm.h | 4 ++--
drivers/net/skfp/h/smt.h | 2 +-
drivers/net/skfp/h/supern_2.h | 2 +-
drivers/net/smc911x.c | 2 +-
drivers/net/spider_net.c | 2 +-
drivers/net/sunbmac.h | 2 +-
drivers/net/sungem.c | 2 +-
drivers/net/sunhme.h | 2 +-
drivers/net/tc35815.c | 4 ++--
drivers/net/tehuti.c | 2 +-
drivers/net/tehuti.h | 2 +-
drivers/net/tokenring/3c359.c | 2 +-
drivers/net/tokenring/lanstreamer.c | 2 +-
drivers/net/tokenring/olympic.c | 2 +-
drivers/net/tokenring/smctr.c | 6 +++---
drivers/net/tokenring/tms380tr.c | 2 +-
drivers/net/tokenring/tms380tr.h | 2 +-
drivers/net/tulip/xircom_cb.c | 2 +-
drivers/net/tun.c | 4 ++--
drivers/net/ucc_geth_ethtool.c | 2 +-
drivers/net/ucc_geth_mii.c | 6 +++---
drivers/net/wan/cycx_drv.c | 4 ++--
drivers/net/wan/sbni.c | 2 +-
drivers/net/wireless/atmel.c | 2 +-
drivers/net/wireless/bcm43xx/bcm43xx_debugfs.h | 2 +-
drivers/net/wireless/ipw2200.c | 2 +-
drivers/net/wireless/iwlwifi/iwl-4965.c | 2 +-
drivers/net/wireless/libertas/cmd.c | 4 ++--
drivers/net/wireless/libertas/scan.c | 4 ++--
drivers/net/wireless/netwave_cs.c | 2 +-
drivers/net/wireless/orinoco.h | 2 +-
drivers/net/wireless/ray_cs.c | 2 +-
drivers/net/wireless/rt2x00/rt2x00reg.h | 2 +-
drivers/net/wireless/rt2x00/rt2x00usb.h | 6 +++---
drivers/net/wireless/rt2x00/rt73usb.c | 2 +-
drivers/net/wireless/wavelan_cs.c | 2 +-
drivers/net/wireless/zd1211rw/zd_chip.h | 4 ++--
drivers/net/yellowfin.c | 2 +-
87 files changed, 120 insertions(+), 120 deletions(-)
diff --git a/drivers/net/82596.c b/drivers/net/82596.c
index 2797da7..d999b63 100644
--- a/drivers/net/82596.c
+++ b/drivers/net/82596.c
@@ -19,7 +19,7 @@
TBD:
* look at deferring rx frames rather than discarding (as per tulip)
* handle tx ring full as per tulip
- * performace test to tune rx_copybreak
+ * performance test to tune rx_copybreak
Most of my modifications relate to the braindead big-endian
implementation by Intel. When the i596 is operating in
diff --git a/drivers/net/amd8111e.c b/drivers/net/amd8111e.c
index e7fdd81..5cefe92 100644
--- a/drivers/net/amd8111e.c
+++ b/drivers/net/amd8111e.c
@@ -1283,7 +1283,7 @@ static irqreturn_t amd8111e_interrupt(int irq, void *dev_id)
#ifdef CONFIG_AMD8111E_NAPI
if(intr0 & RINT0){
if(netif_rx_schedule_prep(dev, &lp->napi)){
- /* Disable receive interupts */
+ /* Disable receive interrupts */
writel(RINTEN0, mmio + INTEN0);
/* Schedule a polling routine */
__netif_rx_schedule(dev, &lp->napi);
@@ -1493,7 +1493,7 @@ static void amd8111e_read_regs(struct amd8111e_priv *lp, u32 *buf)
/*
-This function sets promiscuos mode, all-multi mode or the multicast address
+This function sets promiscuous mode, all-multi mode or the multicast address
list to the device.
*/
static void amd8111e_set_multicast_list(struct net_device *dev)
@@ -1522,7 +1522,7 @@ static void amd8111e_set_multicast_list(struct net_device *dev)
lp->mc_list = NULL;
lp->options &= ~OPTION_MULTICAST_ENABLE;
amd8111e_writeq(*(u64*)mc_filter,lp->mmio + LADRF);
- /* disable promiscous mode */
+ /* disable promiscuous mode */
writel(PROM, lp->mmio + CMD2);
return;
}
@@ -2016,7 +2016,7 @@ static int __devinit amd8111e_probe_one(struct pci_dev *pdev,
for(i = 0; i < ETH_ADDR_LEN; i++)
dev->dev_addr[i] = readb(lp->mmio + PADR + i);
- /* Setting user defined parametrs */
+ /* Setting user defined parameters */
lp->ext_phy_option = speed_duplex[card_idx];
if(coalesce[card_idx])
lp->options |= OPTION_INTR_COAL_ENABLE;
diff --git a/drivers/net/amd8111e.h b/drivers/net/amd8111e.h
index 28c60a7..7d288de 100644
--- a/drivers/net/amd8111e.h
+++ b/drivers/net/amd8111e.h
@@ -614,7 +614,7 @@ typedef enum {
#define CSTATE 1
#define SSTATE 2
-/* Assume contoller gets data 10 times the maximum processing time */
+/* Assume controller gets data 10 times the maximum processing time */
#define REPEAT_CNT 10
/* amd8111e decriptor flag definitions */
diff --git a/drivers/net/appletalk/ltpc.c b/drivers/net/appletalk/ltpc.c
index 6ab2c2d..86a9496 100644
--- a/drivers/net/appletalk/ltpc.c
+++ b/drivers/net/appletalk/ltpc.c
@@ -1233,7 +1233,7 @@ static int __init ltpc_setup(char *str)
if (ints[0] > 2) {
dma = ints[3];
}
- /* ignore any other paramters */
+ /* ignore any other parameters */
}
return 1;
}
diff --git a/drivers/net/atl1/atl1_hw.c b/drivers/net/atl1/atl1_hw.c
index 9d3bd22..82359f7 100644
--- a/drivers/net/atl1/atl1_hw.c
+++ b/drivers/net/atl1/atl1_hw.c
@@ -645,7 +645,7 @@ s32 atl1_init_hw(struct atl1_hw *hw)
atl1_init_flash_opcode(hw);
if (!hw->phy_configured) {
- /* enable GPHY LinkChange Interrrupt */
+ /* enable GPHY LinkChange Interrupt */
ret_val = atl1_write_phy_reg(hw, 18, 0xC00);
if (ret_val)
return ret_val;
diff --git a/drivers/net/atl1/atl1_main.c b/drivers/net/atl1/atl1_main.c
index 35b0a7d..7599163 100644
--- a/drivers/net/atl1/atl1_main.c
+++ b/drivers/net/atl1/atl1_main.c
@@ -575,7 +575,7 @@ static u32 atl1_check_link(struct atl1_adapter *adapter)
return ATL1_SUCCESS;
}
- /* change orignal link status */
+ /* change original link status */
if (netif_carrier_ok(netdev)) {
adapter->link_speed = SPEED_0;
netif_carrier_off(netdev);
diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c
index cb3c6fa..96f0f24 100644
--- a/drivers/net/bonding/bond_3ad.c
+++ b/drivers/net/bonding/bond_3ad.c
@@ -869,7 +869,7 @@ static int ad_lacpdu_send(struct port *port)
lacpdu_header = (struct lacpdu_header *)skb_put(skb, length);
lacpdu_header->ad_header.destination_address = lacpdu_multicast_address;
- /* Note: source addres is set to be the member's PERMANENT address, because we use it
+ /* Note: source address is set to be the member's PERMANENT address, because we use it
to identify loopback lacpdus in receive. */
lacpdu_header->ad_header.source_address = *((struct mac_addr *)(slave->perm_hwaddr));
lacpdu_header->ad_header.length_type = PKT_TYPE_LACPDU;
@@ -912,7 +912,7 @@ static int ad_marker_send(struct port *port, struct bond_marker *marker)
marker_header = (struct bond_marker_header *)skb_put(skb, length);
marker_header->ad_header.destination_address = lacpdu_multicast_address;
- /* Note: source addres is set to be the member's PERMANENT address, because we use it
+ /* Note: source address is set to be the member's PERMANENT address, because we use it
to identify loopback MARKERs in receive. */
marker_header->ad_header.source_address = *((struct mac_addr *)(slave->perm_hwaddr));
marker_header->ad_header.length_type = PKT_TYPE_LACPDU;
diff --git a/drivers/net/chelsio/sge.c b/drivers/net/chelsio/sge.c
index b301c04..ed17cd9 100644
--- a/drivers/net/chelsio/sge.c
+++ b/drivers/net/chelsio/sge.c
@@ -248,7 +248,7 @@ static void restart_sched(unsigned long);
*
* Interrupts are handled by a single CPU and it is likely that on a MP system
* the application is migrated to another CPU. In that scenario, we try to
- * seperate the RX(in irq context) and TX state in order to decrease memory
+ * separate the RX(in irq context) and TX state in order to decrease memory
* contention.
*/
struct sge {
diff --git a/drivers/net/chelsio/subr.c b/drivers/net/chelsio/subr.c
index dc50151..7c95578 100644
--- a/drivers/net/chelsio/subr.c
+++ b/drivers/net/chelsio/subr.c
@@ -559,7 +559,7 @@ struct chelsio_vpd_t {
#define EEPROM_MAX_POLL 4
/*
- * Read SEEPROM. A zero is written to the flag register when the addres is
+ * Read SEEPROM. A zero is written to the flag register when the address is
* written to the Control register. The hardware device will set the flag to a
* one when 4B have been transferred to the Data register.
*/
diff --git a/drivers/net/cxgb3/t3_hw.c b/drivers/net/cxgb3/t3_hw.c
index 522834c..2882e36 100644
--- a/drivers/net/cxgb3/t3_hw.c
+++ b/drivers/net/cxgb3/t3_hw.c
@@ -534,7 +534,7 @@ struct t3_vpd {
*
* Read a 32-bit word from a location in VPD EEPROM using the card's PCI
* VPD ROM capability. A zero is written to the flag bit when the
- * addres is written to the control register. The hardware device will
+ * address is written to the control register. The hardware device will
* set the flag to 1 when 4 bytes have been read into the data register.
*/
int t3_seeprom_read(struct adapter *adapter, u32 addr, u32 *data)
diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c
index 7c6888c..fd7e6a8 100644
--- a/drivers/net/e1000/e1000_hw.c
+++ b/drivers/net/e1000/e1000_hw.c
@@ -803,7 +803,7 @@ e1000_initialize_hardware_bits(struct e1000_hw *hw)
E1000_WRITE_REG(hw, CTRL, reg_ctrl);
break;
case e1000_80003es2lan:
- /* improve small packet performace for fiber/serdes */
+ /* improve small packet performance for fiber/serdes */
if ((hw->media_type == e1000_media_type_fiber) ||
(hw->media_type == e1000_media_type_internal_serdes)) {
reg_tarc0 &= ~(1 << 20);
@@ -5001,7 +5001,7 @@ e1000_read_eeprom(struct e1000_hw *hw,
return -E1000_ERR_EEPROM;
}
- /* Eerd register EEPROM access requires no eeprom aquire/release */
+ /* Eerd register EEPROM access requires no eeprom acquire/release */
if (eeprom->use_eerd == TRUE)
return e1000_read_eeprom_eerd(hw, offset, words, data);
diff --git a/drivers/net/e1000/e1000_hw.h b/drivers/net/e1000/e1000_hw.h
index a2a86c5..e40e515 100644
--- a/drivers/net/e1000/e1000_hw.h
+++ b/drivers/net/e1000/e1000_hw.h
@@ -1068,7 +1068,7 @@ struct e1000_ffvt_entry {
#define E1000_KUMCTRLSTA 0x00034 /* MAC-PHY interface - RW */
#define E1000_MDPHYA 0x0003C /* PHY address - RW */
-#define E1000_MANC2H 0x05860 /* Managment Control To Host - RW */
+#define E1000_MANC2H 0x05860 /* Management Control To Host - RW */
#define E1000_SW_FW_SYNC 0x05B5C /* Software-Firmware Synchronization - RW */
#define E1000_GCR 0x05B00 /* PCI-Ex Control */
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index 4f37506..24a2fc1 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -235,7 +235,7 @@ static struct pci_driver e1000_driver = {
.probe = e1000_probe,
.remove = __devexit_p(e1000_remove),
#ifdef CONFIG_PM
- /* Power Managment Hooks */
+ /* Power Management Hooks */
.suspend = e1000_suspend,
.resume = e1000_resume,
#endif
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index 4fd2e23..febe157 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -4109,7 +4109,7 @@ static struct pci_driver e1000_driver = {
.probe = e1000_probe,
.remove = __devexit_p(e1000_remove),
#ifdef CONFIG_PM
- /* Power Managment Hooks */
+ /* Power Management Hooks */
.suspend = e1000_suspend,
.resume = e1000_resume,
#endif
diff --git a/drivers/net/eepro.c b/drivers/net/eepro.c
index 83bda6c..d3789c5 100644
--- a/drivers/net/eepro.c
+++ b/drivers/net/eepro.c
@@ -1764,7 +1764,7 @@ module_param_array(io, int, NULL, 0);
module_param_array(irq, int, NULL, 0);
module_param_array(mem, int, NULL, 0);
module_param(autodetect, int, 0);
-MODULE_PARM_DESC(io, "EtherExpress Pro/10 I/O base addres(es)");
+MODULE_PARM_DESC(io, "EtherExpress Pro/10 I/O base address(es)");
MODULE_PARM_DESC(irq, "EtherExpress Pro/10 IRQ number(s)");
MODULE_PARM_DESC(mem, "EtherExpress Pro/10 Rx buffer size(es) in kB (3-29)");
MODULE_PARM_DESC(autodetect, "EtherExpress Pro/10 force board(s) detection (0-1)");
diff --git a/drivers/net/ehea/ehea.h b/drivers/net/ehea/ehea.h
index 5f82a46..a50b238 100644
--- a/drivers/net/ehea/ehea.h
+++ b/drivers/net/ehea/ehea.h
@@ -251,7 +251,7 @@ struct ehea_qp_init_attr {
};
/*
- * Event Queue attributes, passed as paramter
+ * Event Queue attributes, passed as parameter
*/
struct ehea_eq_attr {
u32 type;
diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index a96583c..7119332 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -490,7 +490,7 @@ union ring_type {
#define NV_RX3_VLAN_TAG_PRESENT (1<<16)
#define NV_RX3_VLAN_TAG_MASK (0x0000FFFF)
-/* Miscelaneous hardware related defines: */
+/* Miscellaneous hardware related defines: */
#define NV_PCI_REGSZ_VER1 0x270
#define NV_PCI_REGSZ_VER2 0x2d4
#define NV_PCI_REGSZ_VER3 0x604
diff --git a/drivers/net/hamachi.c b/drivers/net/hamachi.c
index ed407c8..683b289 100644
--- a/drivers/net/hamachi.c
+++ b/drivers/net/hamachi.c
@@ -86,7 +86,7 @@ static int force32;
static int options[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
static int full_duplex[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
/* The Hamachi chipset supports 3 parameters each for Rx and Tx
- * interruput management. Parameters will be loaded as specified into
+ * interrupt management. Parameters will be loaded as specified into
* the TxIntControl and RxIntControl registers.
*
* The registers are arranged as follows:
@@ -811,7 +811,7 @@ static int __devinit read_eeprom(void __iomem *ioaddr, int location)
return readb(ioaddr + EEData);
}
-/* MII Managemen Data I/O accesses.
+/* MII Management Data I/O accesses.
These routines assume the MDIO controller is idle, and do not exit until
the command is finished. */
diff --git a/drivers/net/hp100.c b/drivers/net/hp100.c
index 49421d1..8b90d64 100644
--- a/drivers/net/hp100.c
+++ b/drivers/net/hp100.c
@@ -2643,7 +2643,7 @@ static int hp100_login_to_vg_hub(struct net_device *dev, u_short force_relogin)
} else {
hp100_andb(~HP100_PROM_MODE, VG_LAN_CFG_2);
/* For ETR parts we need to reset the prom. bit in the training
- * register, otherwise promiscious mode won't be disabled.
+ * register, otherwise promiscuous mode won't be disabled.
*/
if (lp->chip == HP100_CHIPID_LASSEN) {
hp100_andw(~HP100_MACRQ_PROMSC, TRAIN_REQUEST);
diff --git a/drivers/net/hp100.h b/drivers/net/hp100.h
index e6ca128..e74e45d 100644
--- a/drivers/net/hp100.h
+++ b/drivers/net/hp100.h
@@ -476,7 +476,7 @@
#define HP100_MACRQ_REPEATER 0x0001 /* 1: MAC tells HUB it wants to be
* a cascaded repeater
* 0: ... wants to be a DTE */
-#define HP100_MACRQ_PROMSC 0x0006 /* 2 bits: Promiscious mode
+#define HP100_MACRQ_PROMSC 0x0006 /* 2 bits: Promiscuous mode
* 00: Rcv only unicast packets
* specifically addr to this
* endnode
@@ -488,7 +488,7 @@
#define HP100_CARD_MACVER 0xe000 /* R: 3 bit Cards 100VG MAC version */
#define HP100_MALLOW_REPEATER 0x0001 /* If reset, requested access as an
* end node is allowed */
-#define HP100_MALLOW_PROMSC 0x0004 /* 2 bits: Promiscious mode
+#define HP100_MALLOW_PROMSC 0x0004 /* 2 bits: Promiscuous mode
* 00: Rcv only unicast packets
* specifically addr to this
* endnode
diff --git a/drivers/net/ibm_emac/ibm_emac.h b/drivers/net/ibm_emac/ibm_emac.h
index 97ed22b..655be50 100644
--- a/drivers/net/ibm_emac/ibm_emac.h
+++ b/drivers/net/ibm_emac/ibm_emac.h
@@ -1,7 +1,7 @@
/*
* drivers/net/ibm_emac/ibm_emac.h
*
- * Register definitions for PowerPC 4xx on-chip ethernet contoller
+ * Register definitions for PowerPC 4xx on-chip ethernet controller
*
* Copyright (c) 2004, 2005 Zultys Technologies.
* Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
diff --git a/drivers/net/ibm_newemac/emac.h b/drivers/net/ibm_newemac/emac.h
index 91cb096..49a540a 100644
--- a/drivers/net/ibm_newemac/emac.h
+++ b/drivers/net/ibm_newemac/emac.h
@@ -1,7 +1,7 @@
/*
* drivers/net/ibm_newemac/emac.h
*
- * Register definitions for PowerPC 4xx on-chip ethernet contoller
+ * Register definitions for PowerPC 4xx on-chip ethernet controller
*
* Copyright 2007 Benjamin Herrenschmidt, IBM Corp.
* <benh@kernel.crashing.org>
diff --git a/drivers/net/ibmlana.c b/drivers/net/ibmlana.c
index 91d83ac..5a9b6fa 100644
--- a/drivers/net/ibmlana.c
+++ b/drivers/net/ibmlana.c
@@ -481,7 +481,7 @@ static void InitBoard(struct net_device *dev)
if ((dev->flags & IFF_ALLMULTI) || (mcptr != NULL))
rcrval |= RCREG_AMC;
- /* promiscous mode ? */
+ /* promiscuous mode ? */
if (dev->flags & IFF_PROMISC)
rcrval |= RCREG_PRO;
diff --git a/drivers/net/ibmlana.h b/drivers/net/ibmlana.h
index aa3ddbd..654af95 100644
--- a/drivers/net/ibmlana.h
+++ b/drivers/net/ibmlana.h
@@ -90,7 +90,7 @@ typedef struct {
#define RCREG_ERR 0x8000 /* accept damaged and collided pkts */
#define RCREG_RNT 0x4000 /* accept packets that are < 64 */
#define RCREG_BRD 0x2000 /* accept broadcasts */
-#define RCREG_PRO 0x1000 /* promiscous mode */
+#define RCREG_PRO 0x1000 /* promiscuous mode */
#define RCREG_AMC 0x0800 /* accept all multicasts */
#define RCREG_LB_NONE 0x0000 /* no loopback */
#define RCREG_LB_MAC 0x0200 /* MAC loopback */
diff --git a/drivers/net/ipg.c b/drivers/net/ipg.c
index dbd23bb..27d12eb 100644
--- a/drivers/net/ipg.c
+++ b/drivers/net/ipg.c
@@ -209,7 +209,7 @@ static int mdio_read(struct net_device * dev, int phy_id, int phy_reg)
{
void __iomem *ioaddr = ipg_ioaddr(dev);
/*
- * The GMII mangement frame structure for a read is as follows:
+ * The GMII management frame structure for a read is as follows:
*
* |Preamble|st|op|phyad|regad|ta| data |idle|
* |< 32 1s>|01|10|AAAAA|RRRRR|z0|DDDDDDDDDDDDDDDD|z |
@@ -300,7 +300,7 @@ static void mdio_write(struct net_device *dev, int phy_id, int phy_reg, int val)
{
void __iomem *ioaddr = ipg_ioaddr(dev);
/*
- * The GMII mangement frame structure for a read is as follows:
+ * The GMII management frame structure for a read is as follows:
*
* |Preamble|st|op|phyad|regad|ta| data |idle|
* |< 32 1s>|01|10|AAAAA|RRRRR|z0|DDDDDDDDDDDDDDDD|z |
diff --git a/drivers/net/irda/ali-ircc.c b/drivers/net/irda/ali-ircc.c
index 9f58452..94140f7 100644
--- a/drivers/net/irda/ali-ircc.c
+++ b/drivers/net/irda/ali-ircc.c
@@ -977,7 +977,7 @@ static void ali_ircc_change_speed(struct ali_ircc_cb *self, __u32 baud)
/* Install FIR xmit handler*/
dev->hard_start_xmit = ali_ircc_fir_hard_xmit;
- /* Enable Interuupt */
+ /* Enable Interrupt */
self->ier = IER_EOM; // benjamin 2000/11/20 07:24PM
/* Be ready for incomming frames */
@@ -1096,7 +1096,7 @@ static void ali_ircc_sir_change_speed(struct ali_ircc_cb *priv, __u32 speed)
outb(lcr, iobase+UART_LCR); /* Set 8N1 */
outb(fcr, iobase+UART_FCR); /* Enable FIFO's */
- /* without this, the conection will be broken after come back from FIR speed,
+ /* without this, the connection will be broken after come back from FIR speed,
but with this, the SIR connection is harder to established */
outb((UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2), iobase+UART_MCR);
@@ -1359,7 +1359,7 @@ static int ali_ircc_net_open(struct net_device *dev)
return -EAGAIN;
}
- /* Turn on interrups */
+ /* Turn on interrupts */
outb(UART_IER_RDI , iobase+UART_IER);
/* Ready to play! */
diff --git a/drivers/net/irda/ali-ircc.h b/drivers/net/irda/ali-ircc.h
index e489c66..0787657 100644
--- a/drivers/net/irda/ali-ircc.h
+++ b/drivers/net/irda/ali-ircc.h
@@ -173,13 +173,13 @@ struct st_fifo {
struct frame_cb {
void *start; /* Start of frame in DMA mem */
- int len; /* Lenght of frame in DMA mem */
+ int len; /* Length of frame in DMA mem */
};
struct tx_fifo {
struct frame_cb queue[MAX_TX_WINDOW]; /* Info about frames in queue */
int ptr; /* Currently being sent */
- int len; /* Lenght of queue */
+ int len; /* Length of queue */
int free; /* Next free slot */
void *tail; /* Next free start in DMA mem */
};
diff --git a/drivers/net/irda/donauboe.h b/drivers/net/irda/donauboe.h
index 1e67720..9db3cce 100644
--- a/drivers/net/irda/donauboe.h
+++ b/drivers/net/irda/donauboe.h
@@ -30,7 +30,7 @@
* or the type-DO IR port.
*
* IrDA chip set list from Toshiba Computer Engineering Corp.
- * model method maker controler Version
+ * model method maker controller Version
* Portege 320CT FIR,SIR Toshiba Oboe(Triangle)
* Portege 3010CT FIR,SIR Toshiba Oboe(Sydney)
* Portege 3015CT FIR,SIR Toshiba Oboe(Sydney)
diff --git a/drivers/net/irda/irport.c b/drivers/net/irda/irport.c
index c79caa5..2b2a955 100644
--- a/drivers/net/irda/irport.c
+++ b/drivers/net/irda/irport.c
@@ -276,7 +276,7 @@ static void irport_start(struct irport_cb *self)
outb(UART_LCR_WLEN8, iobase+UART_LCR); /* Reset DLAB */
outb((UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2), iobase+UART_MCR);
- /* Turn on interrups */
+ /* Turn on interrupts */
outb(UART_IER_RLSI | UART_IER_RDI |UART_IER_THRI, iobase+UART_IER);
}
@@ -352,7 +352,7 @@ static void irport_change_speed(void *priv, __u32 speed)
outb(lcr, iobase+UART_LCR); /* Set 8N1 */
outb(fcr, iobase+UART_FCR); /* Enable FIFO's */
- /* Turn on interrups */
+ /* Turn on interrupts */
/* This will generate a fatal interrupt storm.
* People calling us will do that properly - Jean II */
//outb(/*UART_IER_RLSI|*/UART_IER_RDI/*|UART_IER_THRI*/, iobase+UART_IER);
diff --git a/drivers/net/irda/nsc-ircc.h b/drivers/net/irda/nsc-ircc.h
index bbdc97f..29398a4 100644
--- a/drivers/net/irda/nsc-ircc.h
+++ b/drivers/net/irda/nsc-ircc.h
@@ -231,13 +231,13 @@ struct st_fifo {
struct frame_cb {
void *start; /* Start of frame in DMA mem */
- int len; /* Lenght of frame in DMA mem */
+ int len; /* Length of frame in DMA mem */
};
struct tx_fifo {
struct frame_cb queue[MAX_TX_WINDOW]; /* Info about frames in queue */
int ptr; /* Currently being sent */
- int len; /* Lenght of queue */
+ int len; /* Length of queue */
int free; /* Next free slot */
void *tail; /* Next free start in DMA mem */
};
diff --git a/drivers/net/irda/smsc-ircc2.c b/drivers/net/irda/smsc-ircc2.c
index 7e7b582..7fd9a48 100644
--- a/drivers/net/irda/smsc-ircc2.c
+++ b/drivers/net/irda/smsc-ircc2.c
@@ -1165,7 +1165,7 @@ void smsc_ircc_set_sir_speed(struct smsc_ircc_cb *self, __u32 speed)
outb(lcr, iobase + UART_LCR); /* Set 8N1 */
outb(fcr, iobase + UART_FCR); /* Enable FIFO's */
- /* Turn on interrups */
+ /* Turn on interrupts */
outb(UART_IER_RLSI | UART_IER_RDI | UART_IER_THRI, iobase + UART_IER);
IRDA_DEBUG(2, "%s() speed changed to: %d\n", __FUNCTION__, speed);
@@ -1930,7 +1930,7 @@ void smsc_ircc_sir_start(struct smsc_ircc_cb *self)
outb(UART_LCR_WLEN8, sir_base + UART_LCR); /* Reset DLAB */
outb((UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2), sir_base + UART_MCR);
- /* Turn on interrups */
+ /* Turn on interrupts */
outb(UART_IER_RLSI | UART_IER_RDI |UART_IER_THRI, sir_base + UART_IER);
IRDA_DEBUG(3, "%s() - exit\n", __FUNCTION__);
diff --git a/drivers/net/irda/via-ircc.h b/drivers/net/irda/via-ircc.h
index 204b1b3..9d012f0 100644
--- a/drivers/net/irda/via-ircc.h
+++ b/drivers/net/irda/via-ircc.h
@@ -54,13 +54,13 @@ struct st_fifo {
struct frame_cb {
void *start; /* Start of frame in DMA mem */
- int len; /* Lenght of frame in DMA mem */
+ int len; /* Length of frame in DMA mem */
};
struct tx_fifo {
struct frame_cb queue[MAX_TX_WINDOW + 2]; /* Info about frames in queue */
int ptr; /* Currently being sent */
- int len; /* Lenght of queue */
+ int len; /* Length of queue */
int free; /* Next free slot */
void *tail; /* Next free start in DMA mem */
};
diff --git a/drivers/net/ixgbe/ixgbe_common.c b/drivers/net/ixgbe/ixgbe_common.c
index 512e3b2..4b6359e 100644
--- a/drivers/net/ixgbe/ixgbe_common.c
+++ b/drivers/net/ixgbe/ixgbe_common.c
@@ -716,7 +716,7 @@ static s32 ixgbe_init_rx_addrs(struct ixgbe_hw *hw)
* bit-vector to set in the multicast table. The hardware uses 12 bits, from
* incoming rx multicast addresses, to determine the bit-vector to check in
* the MTA. Which of the 4 combination, of 12-bits, the hardware uses is set
- * by the MO field of the MCSTCTRL. The MO field is set during initalization
+ * by the MO field of the MCSTCTRL. The MO field is set during initialization
* to mc_filter_type.
**/
static s32 ixgbe_mta_vector(struct ixgbe_hw *hw, u8 *mc_addr)
@@ -1066,7 +1066,7 @@ s32 ixgbe_disable_pcie_master(struct ixgbe_hw *hw)
/**
- * ixgbe_acquire_swfw_sync - Aquire SWFW semaphore
+ * ixgbe_acquire_swfw_sync - Acquire SWFW semaphore
* @hw: pointer to hardware structure
* @mask: Mask to specify wich semaphore to acquire
*
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index 00bc525..25a9cc2 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -592,7 +592,7 @@ quit_polling:
* ixgbe_setup_msix - Initialize MSI-X interrupts
*
* ixgbe_setup_msix allocates MSI-X vectors and requests
- * interrutps from the kernel.
+ * interrupts from the kernel.
**/
static int ixgbe_setup_msix(struct ixgbe_adapter *adapter)
{
diff --git a/drivers/net/lasi_82596.c b/drivers/net/lasi_82596.c
index efbae4b..1ba38c2 100644
--- a/drivers/net/lasi_82596.c
+++ b/drivers/net/lasi_82596.c
@@ -47,7 +47,7 @@
TBD:
* look at deferring rx frames rather than discarding (as per tulip)
* handle tx ring full as per tulip
- * performace test to tune rx_copybreak
+ * performance test to tune rx_copybreak
Most of my modifications relate to the braindead big-endian
implementation by Intel. When the i596 is operating in
diff --git a/drivers/net/lib82596.c b/drivers/net/lib82596.c
index b59f442..c335d31 100644
--- a/drivers/net/lib82596.c
+++ b/drivers/net/lib82596.c
@@ -47,7 +47,7 @@
TBD:
* look at deferring rx frames rather than discarding (as per tulip)
* handle tx ring full as per tulip
- * performace test to tune rx_copybreak
+ * performance test to tune rx_copybreak
Most of my modifications relate to the braindead big-endian
implementation by Intel. When the i596 is operating in
diff --git a/drivers/net/macb.c b/drivers/net/macb.c
index 047ea7b..1367178 100644
--- a/drivers/net/macb.c
+++ b/drivers/net/macb.c
@@ -239,7 +239,7 @@ static int macb_mii_init(struct macb *bp)
struct eth_platform_data *pdata;
int err = -ENXIO, i;
- /* Enable managment port */
+ /* Enable management port */
macb_writel(bp, NCR, MACB_BIT(MPE));
bp->mii_bus.name = "MACB_mii_bus",
diff --git a/drivers/net/meth.h b/drivers/net/meth.h
index a78dc1c..ecd0e97 100644
--- a/drivers/net/meth.h
+++ b/drivers/net/meth.h
@@ -127,7 +127,7 @@ typedef struct rx_packet {
#define METH_ACCEPT_MY 0 /* 00: Accept PHY address only */
#define METH_ACCEPT_MCAST 0x20 /* 01: Accept physical, broadcast, and multicast filter matches only */
#define METH_ACCEPT_AMCAST 0x40 /* 10: Accept physical, broadcast, and all multicast packets */
-#define METH_PROMISC 0x60 /* 11: Promiscious mode */
+#define METH_PROMISC 0x60 /* 11: Promiscuous mode */
#define METH_PHY_LINK_FAIL BIT(7) /* 0: Link failure detection disabled, 1: Hardware scans for link failure in PHY */
diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c
index 651c269..c263c91 100644
--- a/drivers/net/mv643xx_eth.c
+++ b/drivers/net/mv643xx_eth.c
@@ -535,7 +535,7 @@ struct mv643xx_private {
int rx_resource_err; /* Rx ring resource error flag */
- /* Tx/Rx rings managment indexes fields. For driver use */
+ /* Tx/Rx rings management indexes fields. For driver use */
/* Next available and first returning Rx resource */
int rx_curr_desc_q, rx_used_desc_q;
@@ -757,7 +757,7 @@ static void mv643xx_eth_update_mac_address(struct net_device *dev)
/*
* mv643xx_eth_set_rx_mode
*
- * Change from promiscuos to regular rx mode
+ * Change from promiscuous to regular rx mode
*
* Input : pointer to ethernet interface network device structure
* Output : N/A
diff --git a/drivers/net/netxen/netxen_nic_hw.h b/drivers/net/netxen/netxen_nic_hw.h
index 245bf13..236160a 100644
--- a/drivers/net/netxen/netxen_nic_hw.h
+++ b/drivers/net/netxen/netxen_nic_hw.h
@@ -429,7 +429,7 @@ typedef enum {
#define netxen_get_niu_enable_ge(config_word) \
_netxen_crb_get_bit(config_word, 1)
-/* Promiscous mode options (GbE mode only) */
+/* Promiscuous mode options (GbE mode only) */
typedef enum {
NETXEN_NIU_PROMISC_MODE = 0,
NETXEN_NIU_NON_PROMISC_MODE
diff --git a/drivers/net/ppp_generic.c b/drivers/net/ppp_generic.c
index 4f69037..9e1890f 100644
--- a/drivers/net/ppp_generic.c
+++ b/drivers/net/ppp_generic.c
@@ -2368,7 +2368,7 @@ find_compressor(int type)
}
/*
- * Miscelleneous stuff.
+ * Miscellaneous stuff.
*/
static void
diff --git a/drivers/net/ps3_gelic_net.c b/drivers/net/ps3_gelic_net.c
index 0a42bf5..5efc5b4 100644
--- a/drivers/net/ps3_gelic_net.c
+++ b/drivers/net/ps3_gelic_net.c
@@ -1271,7 +1271,7 @@ static struct ethtool_ops gelic_net_ethtool_ops = {
/**
* gelic_net_tx_timeout_task - task scheduled by the watchdog timeout
* function (to be called not under interrupt status)
- * @work: work is context of tx timout task
+ * @work: work is context of tx timeout task
*
* called as task when tx hangs, resets interface (if interface is up)
*/
diff --git a/drivers/net/qla3xxx.c b/drivers/net/qla3xxx.c
index a579111..da85b7f 100644
--- a/drivers/net/qla3xxx.c
+++ b/drivers/net/qla3xxx.c
@@ -3691,7 +3691,7 @@ static int ql_adapter_up(struct ql3_adapter *qdev)
ql_sem_unlock(qdev, QL_DRVR_SEM_MASK);
} else {
printk(KERN_ERR PFX
- "%s: Could not aquire driver lock.\n",
+ "%s: Could not acquire driver lock.\n",
ndev->name);
goto err_lock;
}
diff --git a/drivers/net/s2io.h b/drivers/net/s2io.h
index cc1797a..63d45d4 100644
--- a/drivers/net/s2io.h
+++ b/drivers/net/s2io.h
@@ -740,7 +740,7 @@ struct mac_info {
u16 mc_pause_threshold_q0q3;
u16 mc_pause_threshold_q4q7;
- void *stats_mem; /* orignal pointer to allocated mem */
+ void *stats_mem; /* original pointer to allocated mem */
dma_addr_t stats_mem_phy; /* Physical address of the stat block */
u32 stats_mem_sz;
struct stat_block *stats_info; /* Logical address of the stat block */
diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c
index 7200883..ff559e4 100644
--- a/drivers/net/sis190.c
+++ b/drivers/net/sis190.c
@@ -102,7 +102,7 @@ enum sis190_registers {
IntrStatus = 0x20,
IntrMask = 0x24,
IntrControl = 0x28,
- IntrTimer = 0x2c, // unused (Interupt Timer)
+ IntrTimer = 0x2c, // unused (Interrupt Timer)
PMControl = 0x30, // unused (Power Mgmt Control/Status)
rsv2 = 0x34, // reserved
ROMControl = 0x38,
diff --git a/drivers/net/sk98lin/skgepnmi.c b/drivers/net/sk98lin/skgepnmi.c
index b36dd9a..c761ff7 100644
--- a/drivers/net/sk98lin/skgepnmi.c
+++ b/drivers/net/sk98lin/skgepnmi.c
@@ -356,7 +356,7 @@ int Level) /* Initialization level */
unsigned int PortMax; /* Number of ports */
unsigned int PortIndex; /* Current port index in loop */
SK_U16 Val16; /* Multiple purpose 16 bit variable */
- SK_U8 Val8; /* Mulitple purpose 8 bit variable */
+ SK_U8 Val8; /* Multiple purpose 8 bit variable */
SK_EVPARA EventParam; /* Event struct for timer event */
SK_PNMI_VCT *pVctBackupData;
diff --git a/drivers/net/sk98lin/skxmac2.c b/drivers/net/sk98lin/skxmac2.c
index b4e7502..3994289 100644
--- a/drivers/net/sk98lin/skxmac2.c
+++ b/drivers/net/sk98lin/skxmac2.c
@@ -3891,7 +3891,7 @@ int SkXmOverflowStatus(
SK_AC *pAC, /* adapter context */
SK_IOC IoC, /* IO context */
unsigned int Port, /* Port Index (MAC_1 + n) */
-SK_U16 IStatus, /* Interupt Status from MAC */
+SK_U16 IStatus, /* Interrupt Status from MAC */
SK_U64 SK_FAR *pStatus) /* ptr for return overflow status value */
{
SK_U64 Status; /* Overflow status */
@@ -4036,7 +4036,7 @@ int SkGmOverflowStatus(
SK_AC *pAC, /* adapter context */
SK_IOC IoC, /* IO context */
unsigned int Port, /* Port Index (MAC_1 + n) */
-SK_U16 IStatus, /* Interupt Status from MAC */
+SK_U16 IStatus, /* Interrupt Status from MAC */
SK_U64 SK_FAR *pStatus) /* ptr for return overflow status value */
{
SK_U64 Status; /* Overflow status */
diff --git a/drivers/net/skfp/ess.c b/drivers/net/skfp/ess.c
index 62b0132..889f987 100644
--- a/drivers/net/skfp/ess.c
+++ b/drivers/net/skfp/ess.c
@@ -598,7 +598,7 @@ static void ess_send_alc_req(struct s_smc *smc)
req->cmd.sba_cmd = REQUEST_ALLOCATION ;
/*
- * set the parameter type and parameter lenght of all used
+ * set the parameter type and parameter length of all used
* parameters
*/
diff --git a/drivers/net/skfp/fplustm.c b/drivers/net/skfp/fplustm.c
index a45205d..b27a895 100644
--- a/drivers/net/skfp/fplustm.c
+++ b/drivers/net/skfp/fplustm.c
@@ -398,7 +398,7 @@ static void copy_tx_mac(struct s_smc *smc, u_long td, struct fddi_mac *mac,
/* u_long td; transmit descriptor */
/* struct fddi_mac *mac; mac frame pointer */
/* unsigned off; start address within buffer memory */
-/* int len ; lenght of the frame including the FC */
+/* int len ; length of the frame including the FC */
{
int i ;
u_int *p ;
@@ -1262,8 +1262,8 @@ Function DOWNCALL/INTERN (SMT, fplustm.c)
Para mode = 1 RX_ENABLE_ALLMULTI enable all multicasts
2 RX_DISABLE_ALLMULTI disable "enable all multicasts"
- 3 RX_ENABLE_PROMISC enable promiscous
- 4 RX_DISABLE_PROMISC disable promiscous
+ 3 RX_ENABLE_PROMISC enable promiscuous
+ 4 RX_DISABLE_PROMISC disable promiscuous
5 RX_ENABLE_NSA enable reception of NSA frames
6 RX_DISABLE_NSA disable reception of NSA frames
diff --git a/drivers/net/skfp/h/fplustm.h b/drivers/net/skfp/h/fplustm.h
index 98bbf65..586f055 100644
--- a/drivers/net/skfp/h/fplustm.h
+++ b/drivers/net/skfp/h/fplustm.h
@@ -237,8 +237,8 @@ struct s_smt_fp {
*/
#define RX_ENABLE_ALLMULTI 1 /* enable all multicasts */
#define RX_DISABLE_ALLMULTI 2 /* disable "enable all multicasts" */
-#define RX_ENABLE_PROMISC 3 /* enable promiscous */
-#define RX_DISABLE_PROMISC 4 /* disable promiscous */
+#define RX_ENABLE_PROMISC 3 /* enable promiscuous */
+#define RX_DISABLE_PROMISC 4 /* disable promiscuous */
#define RX_ENABLE_NSA 5 /* enable reception of NSA frames */
#define RX_DISABLE_NSA 6 /* disable reception of NSA frames */
diff --git a/drivers/net/skfp/h/smt.h b/drivers/net/skfp/h/smt.h
index 1ff5899..2976757 100644
--- a/drivers/net/skfp/h/smt.h
+++ b/drivers/net/skfp/h/smt.h
@@ -413,7 +413,7 @@ struct smt_p_reason {
#define SMT_RDF_SUCCESS 0x00000003 /* success (PMF) */
#define SMT_RDF_BADSET 0x00000004 /* bad set count (PMF) */
#define SMT_RDF_ILLEGAL 0x00000005 /* read only (PMF) */
-#define SMT_RDF_NOPARAM 0x6 /* paramter not supported (PMF) */
+#define SMT_RDF_NOPARAM 0x6 /* parameter not supported (PMF) */
#define SMT_RDF_RANGE 0x8 /* out of range */
#define SMT_RDF_AUTHOR 0x9 /* not autohorized */
#define SMT_RDF_LENGTH 0x0a /* length error */
diff --git a/drivers/net/skfp/h/supern_2.h b/drivers/net/skfp/h/supern_2.h
index 5ba0b83..1074f96 100644
--- a/drivers/net/skfp/h/supern_2.h
+++ b/drivers/net/skfp/h/supern_2.h
@@ -386,7 +386,7 @@ struct tx_queue {
#define FM_MDISRCV (4<<8) /* disable receive function */
#define FM_MRES0 (5<<8) /* reserve */
#define FM_MLIMPROM (6<<8) /* limited-promiscuous mode */
-#define FM_MPROMISCOUS (7<<8) /* address detection : promiscous */
+#define FM_MPROMISCOUS (7<<8) /* address detection : promiscuous */
#define FM_SELSA 0x0800 /* select-short-address bit */
diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c
index 76cc1d3..648b904 100644
--- a/drivers/net/smc911x.c
+++ b/drivers/net/smc911x.c
@@ -466,7 +466,7 @@ static inline void smc911x_rcv(struct net_device *dev)
/* Align IP header to 32 bits
* Note that the device is configured to add a 2
* byte padding to the packet start, so we really
- * want to write to the orignal data pointer */
+ * want to write to the original data pointer */
data = skb->data;
skb_reserve(skb, 2);
skb_put(skb,pkt_len-4);
diff --git a/drivers/net/spider_net.c b/drivers/net/spider_net.c
index bccae7e..7a7f5cd 100644
--- a/drivers/net/spider_net.c
+++ b/drivers/net/spider_net.c
@@ -1826,7 +1826,7 @@ spider_net_enable_card(struct spider_net_card *card)
spider_net_write_reg(card, SPIDER_NET_ECMODE, SPIDER_NET_ECMODE_VALUE);
- /* set chain tail adress for RX chains and
+ /* set chain tail address for RX chains and
* enable DMA */
spider_net_enable_rxchtails(card);
spider_net_enable_rxdmac(card);
diff --git a/drivers/net/sunbmac.h b/drivers/net/sunbmac.h
index b563d3c..681442b 100644
--- a/drivers/net/sunbmac.h
+++ b/drivers/net/sunbmac.h
@@ -185,7 +185,7 @@
#define BIGMAC_RXCFG_ENABLE 0x00000001 /* Enable the receiver */
#define BIGMAC_RXCFG_FIFO 0x0000000e /* Default rx fthresh... */
#define BIGMAC_RXCFG_PSTRIP 0x00000020 /* Pad byte strip enable */
-#define BIGMAC_RXCFG_PMISC 0x00000040 /* Enable promiscous mode */
+#define BIGMAC_RXCFG_PMISC 0x00000040 /* Enable promiscuous mode */
#define BIGMAC_RXCFG_DERR 0x00000080 /* Disable error checking */
#define BIGMAC_RXCFG_DCRCS 0x00000100 /* Disable CRC stripping */
#define BIGMAC_RXCFG_ME 0x00000200 /* Receive packets addressed to me */
diff --git a/drivers/net/sungem.c b/drivers/net/sungem.c
index 6887214..097a065 100644
--- a/drivers/net/sungem.c
+++ b/drivers/net/sungem.c
@@ -780,7 +780,7 @@ static int gem_rx(struct gem *gp, int work_to_do)
break;
/* When writing back RX descriptor, GEM writes status
- * then buffer address, possibly in seperate transactions.
+ * then buffer address, possibly in separate transactions.
* If we don't wait for the chip to write both, we could
* post a new buffer to this descriptor then have GEM spam
* on the buffer address. We sync on the RX completion
diff --git a/drivers/net/sunhme.h b/drivers/net/sunhme.h
index 90f446d..68bf4e1 100644
--- a/drivers/net/sunhme.h
+++ b/drivers/net/sunhme.h
@@ -223,7 +223,7 @@
/* BigMac receive config register. */
#define BIGMAC_RXCFG_ENABLE 0x00000001 /* Enable the receiver */
#define BIGMAC_RXCFG_PSTRIP 0x00000020 /* Pad byte strip enable */
-#define BIGMAC_RXCFG_PMISC 0x00000040 /* Enable promiscous mode */
+#define BIGMAC_RXCFG_PMISC 0x00000040 /* Enable promiscuous mode */
#define BIGMAC_RXCFG_DERR 0x00000080 /* Disable error checking */
#define BIGMAC_RXCFG_DCRCS 0x00000100 /* Disable CRC stripping */
#define BIGMAC_RXCFG_REJME 0x00000200 /* Reject packets addressed to me */
diff --git a/drivers/net/tc35815.c b/drivers/net/tc35815.c
index d887c05..0fbf96d 100644
--- a/drivers/net/tc35815.c
+++ b/drivers/net/tc35815.c
@@ -136,7 +136,7 @@ struct tc35815_regs {
#define DMA_RxAlign_2 0x00800000
#define DMA_RxAlign_3 0x00c00000
#define DMA_M66EnStat 0x00080000 /* 1:66MHz Enable State */
-#define DMA_IntMask 0x00040000 /* 1:Interupt mask */
+#define DMA_IntMask 0x00040000 /* 1:Interrupt mask */
#define DMA_SWIntReq 0x00020000 /* 1:Software Interrupt request */
#define DMA_TxWakeUp 0x00010000 /* 1:Transmit Wake Up */
#define DMA_RxBigE 0x00008000 /* 1:Receive Big Endian */
@@ -281,7 +281,7 @@ struct tc35815_regs {
#define Int_IntMacTx 0x00000001 /* 1:Tx controller & Clear */
/* MD_CA bit asign --------------------------------------------------------- */
-#define MD_CA_PreSup 0x00001000 /* 1:Preamble Supress */
+#define MD_CA_PreSup 0x00001000 /* 1:Preamble Suppress */
#define MD_CA_Busy 0x00000800 /* 1:Busy (Start Operation) */
#define MD_CA_Wr 0x00000400 /* 1:Write 0:Read */
diff --git a/drivers/net/tehuti.c b/drivers/net/tehuti.c
index 21230c9..3ed1973 100644
--- a/drivers/net/tehuti.c
+++ b/drivers/net/tehuti.c
@@ -276,7 +276,7 @@ static irqreturn_t bdx_isr_napi(int irq, void *dev)
* currently intrs are disabled (since we read ISR),
* and we have failed to register next poll.
* so we read the regs to trigger chip
- * and allow further interupts. */
+ * and allow further interrupts. */
READ_REG(priv, regTXF_WPTR_0);
READ_REG(priv, regRXD_WPTR_0);
}
diff --git a/drivers/net/tehuti.h b/drivers/net/tehuti.h
index efd170f..992efa6 100644
--- a/drivers/net/tehuti.h
+++ b/drivers/net/tehuti.h
@@ -510,7 +510,7 @@ struct txd_desc {
#define GMAC_RX_FILTER_ACRC 0x0010 /* accept crc error */
#define GMAC_RX_FILTER_AM 0x0008 /* accept multicast */
#define GMAC_RX_FILTER_AB 0x0004 /* accept broadcast */
-#define GMAC_RX_FILTER_PRM 0x0001 /* [0:1] promiscous mode */
+#define GMAC_RX_FILTER_PRM 0x0001 /* [0:1] promiscuous mode */
#define MAX_FRAME_AB_VAL 0x3fff /* 13:0 */
diff --git a/drivers/net/tokenring/3c359.c b/drivers/net/tokenring/3c359.c
index 5d31519..9d7a0c9 100644
--- a/drivers/net/tokenring/3c359.c
+++ b/drivers/net/tokenring/3c359.c
@@ -75,7 +75,7 @@ static char version[] __devinitdata =
MODULE_AUTHOR("Mike Phillips <mikep@linuxtr.net>") ;
MODULE_DESCRIPTION("3Com 3C359 Velocity XL Token Ring Adapter Driver \n") ;
-/* Module paramters */
+/* Module parameters */
/* Ring Speed 0,4,16
* 0 = Autosense
diff --git a/drivers/net/tokenring/lanstreamer.c b/drivers/net/tokenring/lanstreamer.c
index 47d84cd..21c4f3c 100644
--- a/drivers/net/tokenring/lanstreamer.c
+++ b/drivers/net/tokenring/lanstreamer.c
@@ -170,7 +170,7 @@ static char *open_min_error[] = {
"Monitor Contention failer for RPL", "FDX Protocol Error"
};
-/* Module paramters */
+/* Module parameters */
/* Ring Speed 0,4,16
* 0 = Autosense
diff --git a/drivers/net/tokenring/olympic.c b/drivers/net/tokenring/olympic.c
index 74c1f0f..b1178f1 100644
--- a/drivers/net/tokenring/olympic.c
+++ b/drivers/net/tokenring/olympic.c
@@ -132,7 +132,7 @@ static char *open_min_error[] = {"No error", "Function Failure", "Signal Lost",
"Reserved", "Reserved", "No Monitor Detected for RPL",
"Monitor Contention failer for RPL", "FDX Protocol Error"};
-/* Module paramters */
+/* Module parameters */
MODULE_AUTHOR("Mike Phillips <mikep@linuxtr.net>") ;
MODULE_DESCRIPTION("Olympic PCI/Cardbus Chipset Driver") ;
diff --git a/drivers/net/tokenring/smctr.c b/drivers/net/tokenring/smctr.c
index 93da3a3..4238a61 100644
--- a/drivers/net/tokenring/smctr.c
+++ b/drivers/net/tokenring/smctr.c
@@ -2426,7 +2426,7 @@ static irqreturn_t smctr_interrupt(int irq, void *dev_id)
break ;
/* Type 0x0E - TRC Initialization Sequence Interrupt
- * Subtype -- 00-FF Initializatin sequence complete
+ * Subtype -- 00-FF Initialization sequence complete
*/
case ISB_IMC_TRC_INTRNL_TST_STATUS:
tp->status = INITIALIZED;
@@ -3055,8 +3055,8 @@ static int smctr_load_node_addr(struct net_device *dev)
* disabled.!?
*
* NOTE 2: If the monitor_state is MS_BEACON_TEST_STATE and the receive_mask
- * has any multi-cast or promiscous bits set, the receive_mask needs to
- * be changed to clear the multi-cast or promiscous mode bits, the lobe_test
+ * has any multi-cast or promiscuous bits set, the receive_mask needs to
+ * be changed to clear the multi-cast or promiscuous mode bits, the lobe_test
* run, and then the receive mask set back to its original value if the test
* is successful.
*/
diff --git a/drivers/net/tokenring/tms380tr.c b/drivers/net/tokenring/tms380tr.c
index d5fa36d..b15435d 100644
--- a/drivers/net/tokenring/tms380tr.c
+++ b/drivers/net/tokenring/tms380tr.c
@@ -48,7 +48,7 @@
* 25-Sep-99 AF Uped TPL_NUM from 3 to 9
* Removed extraneous 'No free TPL'
* 22-Dec-99 AF Added Madge PCI Mk2 support and generalized
- * parts of the initilization procedure.
+ * parts of the initialization procedure.
* 30-Dec-99 AF Turned tms380tr into a library ala 8390.
* Madge support is provided in the abyss module
* Generic PCI support is in the tmspci module.
diff --git a/drivers/net/tokenring/tms380tr.h b/drivers/net/tokenring/tms380tr.h
index 7daf74e..1cbb8b8 100644
--- a/drivers/net/tokenring/tms380tr.h
+++ b/drivers/net/tokenring/tms380tr.h
@@ -441,7 +441,7 @@ typedef struct {
#define PASS_FIRST_BUF_ONLY 0x0100 /* Passes only first internal buffer
* of each received frame; FrameSize
* of RPLs must contain internal
- * BUFFER_SIZE bits for promiscous mode.
+ * BUFFER_SIZE bits for promiscuous mode.
*/
#define ENABLE_FULL_DUPLEX_SELECTION 0x2000
/* Enable the use of full-duplex
diff --git a/drivers/net/tulip/xircom_cb.c b/drivers/net/tulip/xircom_cb.c
index 70befe3..5dad012 100644
--- a/drivers/net/tulip/xircom_cb.c
+++ b/drivers/net/tulip/xircom_cb.c
@@ -646,7 +646,7 @@ static void setup_descriptors(struct xircom_private *card)
}
wmb();
- /* wite the transmit descriptor ring to the card */
+ /* write the transmit descriptor ring to the card */
address = (unsigned long) card->tx_dma_handle;
val =cpu_to_le32(address);
outl(val, card->io_port + CSR4); /* xmit descr list address */
diff --git a/drivers/net/tun.c b/drivers/net/tun.c
index 1f76446..fc9eada 100644
--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -142,7 +142,7 @@ add_multi(u32* filter, const u8* addr)
filter[bit_nr >> 5] |= 1 << (bit_nr & 31);
}
-/** Remove the specified Ethernet addres from this multicast filter. */
+/** Remove the specified Ethernet address from this multicast filter. */
static void
del_multi(u32* filter, const u8* addr)
{
@@ -399,7 +399,7 @@ static ssize_t tun_chr_aio_read(struct kiocb *iocb, const struct iovec *iv,
* - the packet is addressed to us.
* - the packet is broadcast.
* - the packet is multicast and
- * - we are multicast promiscous.
+ * - we are multicast promiscuous.
* - we belong to the multicast group.
*/
skb_copy_from_linear_data(skb, addr, min_t(size_t, sizeof addr,
diff --git a/drivers/net/ucc_geth_ethtool.c b/drivers/net/ucc_geth_ethtool.c
index 9a9622c..f8d319b 100644
--- a/drivers/net/ucc_geth_ethtool.c
+++ b/drivers/net/ucc_geth_ethtool.c
@@ -7,7 +7,7 @@
*
* Limitation:
* Can only get/set setttings of the first queue.
- * Need to re-open the interface manually after changing some paramters.
+ * Need to re-open the interface manually after changing some parameters.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
diff --git a/drivers/net/ucc_geth_mii.c b/drivers/net/ucc_geth_mii.c
index df884f0..7c0d4a8 100644
--- a/drivers/net/ucc_geth_mii.c
+++ b/drivers/net/ucc_geth_mii.c
@@ -63,11 +63,11 @@ int uec_mdio_write(struct mii_bus *bus, int mii_id, int regnum, u16 value)
{
struct ucc_mii_mng __iomem *regs = (void __iomem *)bus->priv;
- /* Setting up the MII Mangement Address Register */
+ /* Setting up the MII Management Address Register */
out_be32(®s->miimadd,
(mii_id << MIIMADD_PHY_ADDRESS_SHIFT) | regnum);
- /* Setting up the MII Mangement Control Register with the value */
+ /* Setting up the MII Management Control Register with the value */
out_be32(®s->miimcon, value);
/* Wait till MII management write is complete */
@@ -85,7 +85,7 @@ int uec_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
struct ucc_mii_mng __iomem *regs = (void __iomem *)bus->priv;
u16 value;
- /* Setting up the MII Mangement Address Register */
+ /* Setting up the MII Management Address Register */
out_be32(®s->miimadd,
(mii_id << MIIMADD_PHY_ADDRESS_SHIFT) | regnum);
diff --git a/drivers/net/wan/cycx_drv.c b/drivers/net/wan/cycx_drv.c
index d347d59..d14e667 100644
--- a/drivers/net/wan/cycx_drv.c
+++ b/drivers/net/wan/cycx_drv.c
@@ -322,7 +322,7 @@ static int cycx_data_boot(void __iomem *addr, u8 *code, u32 len)
void __iomem *pt_boot_cmd = addr + CMD_OFFSET;
u32 i;
- /* boot buffer lenght */
+ /* boot buffer length */
writew(CFM_LOAD_BUFSZ, pt_boot_cmd + sizeof(u16));
writew(GEN_DEFPAR, pt_boot_cmd);
@@ -353,7 +353,7 @@ static int cycx_code_boot(void __iomem *addr, u8 *code, u32 len)
void __iomem *pt_boot_cmd = addr + CMD_OFFSET;
u32 i;
- /* boot buffer lenght */
+ /* boot buffer length */
writew(CFM_LOAD_BUFSZ, pt_boot_cmd + sizeof(u16));
writew(GEN_DEFPAR, pt_boot_cmd);
diff --git a/drivers/net/wan/sbni.c b/drivers/net/wan/sbni.c
index 2e8b5c2..74f87df 100644
--- a/drivers/net/wan/sbni.c
+++ b/drivers/net/wan/sbni.c
@@ -1472,7 +1472,7 @@ sbni_get_stats( struct net_device *dev )
static void
set_multicast_list( struct net_device *dev )
{
- return; /* sbni always operate in promiscuos mode */
+ return; /* sbni always operate in promiscuous mode */
}
diff --git a/drivers/net/wireless/atmel.c b/drivers/net/wireless/atmel.c
index 059ce3f..60dfdd9 100644
--- a/drivers/net/wireless/atmel.c
+++ b/drivers/net/wireless/atmel.c
@@ -3278,7 +3278,7 @@ static void atmel_smooth_qual(struct atmel_private *priv)
priv->wstats.qual.updated &= ~IW_QUAL_QUAL_INVALID;
}
-/* deals with incoming managment frames. */
+/* deals with incoming management frames. */
static void atmel_management_frame(struct atmel_private *priv,
struct ieee80211_hdr_4addr *header,
u16 frame_len, u8 rssi)
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_debugfs.h b/drivers/net/wireless/bcm43xx/bcm43xx_debugfs.h
index a40d1af..edf7d8f 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx_debugfs.h
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_debugfs.h
@@ -28,7 +28,7 @@ struct bcm43xx_dfsentry {
struct bcm43xx_xmitstatus *xmitstatus_buffer;
int xmitstatus_ptr;
int xmitstatus_cnt;
- /* We need a seperate buffer while printing to avoid
+ /* We need a separate buffer while printing to avoid
* concurrency issues. (New xmitstatus can arrive
* while we are printing).
*/
diff --git a/drivers/net/wireless/ipw2200.c b/drivers/net/wireless/ipw2200.c
index 54f44e5..e24382f 100644
--- a/drivers/net/wireless/ipw2200.c
+++ b/drivers/net/wireless/ipw2200.c
@@ -1144,7 +1144,7 @@ static void ipw_led_shutdown(struct ipw_priv *priv)
/*
* The following adds a new attribute to the sysfs representation
* of this device driver (i.e. a new file in /sys/bus/pci/drivers/ipw/)
- * used for controling the debug level.
+ * used for controlling the debug level.
*
* See the level definitions in ipw for details.
*/
diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c
index 891f90d..e242647 100644
--- a/drivers/net/wireless/iwlwifi/iwl-4965.c
+++ b/drivers/net/wireless/iwlwifi/iwl-4965.c
@@ -4051,7 +4051,7 @@ static int iwl4965_tx_status_reply_compressed_ba(struct iwl_priv *priv,
agg->wait_for_ba = 0;
IWL_DEBUG_TX_REPLY("BA %d %d\n", agg->start_idx, ba_resp->ba_seq_ctl);
sh = agg->start_idx - SEQ_TO_INDEX(ba_seq_ctl>>4);
- if (sh < 0) /* tbw something is wrong with indeces */
+ if (sh < 0) /* tbw something is wrong with indices */
sh += 0x100;
/* don't use 64 bits for now */
diff --git a/drivers/net/wireless/libertas/cmd.c b/drivers/net/wireless/libertas/cmd.c
index be5cfd8..31ee4f6 100644
--- a/drivers/net/wireless/libertas/cmd.c
+++ b/drivers/net/wireless/libertas/cmd.c
@@ -1120,7 +1120,7 @@ int libertas_set_mac_packet_filter(wlan_private * priv)
* @param cmd_action command action: GET or SET
* @param wait_option wait option: wait response or not
* @param cmd_oid cmd oid: treated as sub command
- * @param pdata_buf A pointer to informaion buffer
+ * @param pdata_buf A pointer to information buffer
* @return 0 or -1
*/
int libertas_prepare_and_send_command(wlan_private * priv,
@@ -1606,7 +1606,7 @@ static void cleanup_cmdnode(struct cmd_ctrl_node *ptempnode)
* @param ptempnode A pointer to cmd_ctrl_node structure
* @param cmd_oid cmd oid: treated as sub command
* @param wait_option wait option: wait response or not
- * @param pdata_buf A pointer to informaion buffer
+ * @param pdata_buf A pointer to information buffer
* @return 0 or -1
*/
void libertas_set_cmd_ctrl_node(wlan_private * priv,
diff --git a/drivers/net/wireless/libertas/scan.c b/drivers/net/wireless/libertas/scan.c
index ad1e67d..537b36c 100644
--- a/drivers/net/wireless/libertas/scan.c
+++ b/drivers/net/wireless/libertas/scan.c
@@ -443,7 +443,7 @@ wlan_scan_setup_scan_config(wlan_private * priv,
ptlvpos = pscancfgout->tlvbuffer;
/*
- * Set the initial scan paramters for progressive scanning. If a specific
+ * Set the initial scan parameters for progressive scanning. If a specific
* BSSID or SSID is used, the number of channels in the scan command
* will be increased to the absolute maximum
*/
@@ -1679,7 +1679,7 @@ int libertas_get_scan(struct net_device *dev, struct iw_request_info *info,
*
* Called from libertas_prepare_and_send_command() in cmd.c
*
- * Sends a fixed lenght data part (specifying the BSS type and BSSID filters)
+ * Sends a fixed length data part (specifying the BSS type and BSSID filters)
* as well as a variable number/length of TLVs to the firmware.
*
* @param priv A pointer to wlan_private structure
diff --git a/drivers/net/wireless/netwave_cs.c b/drivers/net/wireless/netwave_cs.c
index d2fa079..c4b649e 100644
--- a/drivers/net/wireless/netwave_cs.c
+++ b/drivers/net/wireless/netwave_cs.c
@@ -1408,7 +1408,7 @@ static void set_multicast_list(struct net_device *dev)
/* Multicast Mode */
rcvMode = rxConfRxEna + rxConfAMP + rxConfBcast;
} else if (dev->flags & IFF_PROMISC) {
- /* Promiscous mode */
+ /* Promiscuous mode */
rcvMode = rxConfRxEna + rxConfPro + rxConfAMP + rxConfBcast;
} else {
/* Normal mode */
diff --git a/drivers/net/wireless/orinoco.h b/drivers/net/wireless/orinoco.h
index 4720fb2..703a4cf 100644
--- a/drivers/net/wireless/orinoco.h
+++ b/drivers/net/wireless/orinoco.h
@@ -108,7 +108,7 @@ struct orinoco_private {
int scan_inprogress; /* Scan pending... */
u32 scan_mode; /* Type of scan done */
char * scan_result; /* Result of previous scan */
- int scan_len; /* Lenght of result */
+ int scan_len; /* Length of result */
};
#ifdef ORINOCO_DEBUG
diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c
index f87fe10..24f9066 100644
--- a/drivers/net/wireless/ray_cs.c
+++ b/drivers/net/wireless/ray_cs.c
@@ -129,7 +129,7 @@ static void ray_reset(struct net_device *dev);
static void ray_update_parm(struct net_device *dev, UCHAR objid, UCHAR *value, int len);
static void verify_dl_startup(u_long);
-/* Prototypes for interrpt time functions **********************************/
+/* Prototypes for interrupt time functions **********************************/
static irqreturn_t ray_interrupt (int reg, void *dev_id);
static void clear_interrupt(ray_dev_t *local);
static void rx_deauthenticate(ray_dev_t *local, struct rcs __iomem *prcs,
diff --git a/drivers/net/wireless/rt2x00/rt2x00reg.h b/drivers/net/wireless/rt2x00/rt2x00reg.h
index 8384212..fe9011d 100644
--- a/drivers/net/wireless/rt2x00/rt2x00reg.h
+++ b/drivers/net/wireless/rt2x00/rt2x00reg.h
@@ -230,7 +230,7 @@ static inline u8 rt2x00_get_field8(const u8 reg,
* corresponds with the TX register format for the current device.
* 4 - plcp, 802.11b rates are device specific,
* 802.11g rates are set according to the ieee802.11a-1999 p.14.
- * The bit to enable preamble is set in a seperate define.
+ * The bit to enable preamble is set in a separate define.
*/
#define DEV_RATE FIELD32(0x000007ff)
#define DEV_PREAMBLE FIELD32(0x00000800)
diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.h b/drivers/net/wireless/rt2x00/rt2x00usb.h
index 2681abe..b76881f 100644
--- a/drivers/net/wireless/rt2x00/rt2x00usb.h
+++ b/drivers/net/wireless/rt2x00/rt2x00usb.h
@@ -135,13 +135,13 @@ static inline int rt2x00usb_vendor_request_sw(const struct rt2x00_dev
* kmalloc for correct handling inside the kernel USB layer.
*/
static inline int rt2x00usb_eeprom_read(const struct rt2x00_dev *rt2x00dev,
- __le16 *eeprom, const u16 lenght)
+ __le16 *eeprom, const u16 length)
{
- int timeout = REGISTER_TIMEOUT * (lenght / sizeof(u16));
+ int timeout = REGISTER_TIMEOUT * (length / sizeof(u16));
return rt2x00usb_vendor_request(rt2x00dev, USB_EEPROM_READ,
USB_VENDOR_REQUEST_IN, 0x0000,
- 0x0000, eeprom, lenght, timeout);
+ 0x0000, eeprom, length, timeout);
}
/*
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index c0671c2..d1468a1 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -833,7 +833,7 @@ static int rt73usb_load_firmware(struct rt2x00_dev *rt2x00dev, void *data,
/*
* Write firmware to device.
- * We setup a seperate cache for this action,
+ * We setup a separate cache for this action,
* since we are going to write larger chunks of data
* then normally used cache size.
*/
diff --git a/drivers/net/wireless/wavelan_cs.c b/drivers/net/wireless/wavelan_cs.c
index 577c647..5d28105 100644
--- a/drivers/net/wireless/wavelan_cs.c
+++ b/drivers/net/wireless/wavelan_cs.c
@@ -159,7 +159,7 @@ psa_read(struct net_device * dev,
/*------------------------------------------------------------------*/
/*
- * Write the Paramter Storage Area to the WaveLAN card's memory
+ * Write the Parameter Storage Area to the WaveLAN card's memory
*/
static void
psa_write(struct net_device * dev,
diff --git a/drivers/net/wireless/zd1211rw/zd_chip.h b/drivers/net/wireless/zd1211rw/zd_chip.h
index 8009b70..301315a 100644
--- a/drivers/net/wireless/zd1211rw/zd_chip.h
+++ b/drivers/net/wireless/zd1211rw/zd_chip.h
@@ -620,8 +620,8 @@ enum {
#define E2P_PWR_INT_GUARD 8
#define E2P_CHANNEL_COUNT 14
-/* If you compare this addresses with the ZYDAS orignal driver, please notify
- * that we use word mapping for the EEPROM.
+/* If you compare these addresses with the ZYDAS original driver,
+ * please notice that we use word mapping for the EEPROM.
*/
/*
diff --git a/drivers/net/yellowfin.c b/drivers/net/yellowfin.c
index 87f002a..cb6e978 100644
--- a/drivers/net/yellowfin.c
+++ b/drivers/net/yellowfin.c
@@ -533,7 +533,7 @@ static int __devinit read_eeprom(void __iomem *ioaddr, int location)
return ioread8(ioaddr + EERead);
}
-/* MII Managemen Data I/O accesses.
+/* MII Management Data I/O accesses.
These routines assume the MDIO controller is idle, and do not exit until
the command is finished. */
--
1.5.3.7.949.g2221a6
-------------------------------------------------------------------------
SF.Net email is sponsored by:
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services
for just about anything Open Source.
http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace
^ permalink raw reply related [flat|nested] 34+ messages in thread* Re: [PATCH] drivers/net/: Spelling fixes
@ 2007-12-17 20:40 ` Pavel Roskin
2007-12-17 20:47 ` Joe Perches
0 siblings, 1 reply; 34+ messages in thread
From: Pavel Roskin @ 2007-12-17 20:40 UTC (permalink / raw)
To: Joe Perches; +Cc: linux-kernel
On Mon, 2007-12-17 at 11:40 -0800, Joe Perches wrote:
> Signed-off-by: Joe Perches <joe@perches.com>
> diff --git a/drivers/net/wireless/orinoco.h
> b/drivers/net/wireless/orinoco.h
> index 4720fb2..703a4cf 100644
> --- a/drivers/net/wireless/orinoco.h
> +++ b/drivers/net/wireless/orinoco.h
> @@ -108,7 +108,7 @@ struct orinoco_private {
> int scan_inprogress; /* Scan pending... */
> u32 scan_mode; /* Type of scan done */
> char * scan_result; /* Result of previous scan */
> - int scan_len; /* Lenght of result */
> + int scan_len; /* Length of result */
> };
>
> #ifdef ORINOCO_DEBUG
Acked-by: Pavel Roskin <proski@gnu.org>
Actually, I don't think such minor comment fixes need to be reviewed by
the maintainers. Thanks anyway.
--
Regards,
Pavel Roskin
^ permalink raw reply [flat|nested] 34+ messages in thread* Re: [PATCH] drivers/net/: Spelling fixes
2007-12-17 20:40 ` Pavel Roskin
@ 2007-12-17 20:47 ` Joe Perches
0 siblings, 0 replies; 34+ messages in thread
From: Joe Perches @ 2007-12-17 20:47 UTC (permalink / raw)
To: Pavel Roskin; +Cc: linux-kernel
On Mon, 2007-12-17 at 15:40 -0500, Pavel Roskin wrote:
> On Mon, 2007-12-17 at 11:40 -0800, Joe Perches wrote:
> I don't think such minor comment fixes need to be reviewed by
> the maintainers. Thanks anyway.
I'd like to know who pushes what source tree sections forward.
I have a script that uses annotated MAINTAINERS sections
to forward patches to "appropriate" maintainers. That script
generated the CC's.
To me the question is who pushes.
If it's not a maintainer, who does? Anyone have list?
^ permalink raw reply [flat|nested] 34+ messages in thread
* Re: [PATCH] drivers/net/: Spelling fixes
@ 2007-12-17 20:43 ` John W. Linville
0 siblings, 0 replies; 34+ messages in thread
From: John W. Linville @ 2007-12-17 20:43 UTC (permalink / raw)
To: Joe Perches
Cc: Pavel Roskin, David Gibson, orinoco-devel, Yi Zhu,
Jaroslav Kysela, linuxppc-dev, Paul Mackerras, Peter De Shrijver,
Rastapur Santosh, bonding-devel, Andy Gospodarek, Amit S. Kale,
ipw2100-devel, atl1-devel, Chris Snook, Stefano Brivio,
libertas-dev, Dan Williams, Jesse Brandeburg, Manish Lachwani,
Jean Tourrilhes, Jeff Kirsher, Arnaldo Carvalho de Melo,
Francois Romieu, Daniel Drake, Li Yang, Jeff Garzik, Jeb Cramer,
Chad Tindel, orinoco-users, Jay Cliburn, Samuel Ortiz,
Sivakumar Subramani, Jesse Huang, Mike Phillips, rt2400-devel,
Ulrich Kunitz, ipw3945-devel, cbe-oss-dev, Alexander Indenbaum,
Adam Fritzler, Auke Kok, James Ketrenos, Haavard Skinnemoen,
tulip-users, netdev, Ramkrishna Vepa, linux-wireless,
linux-kernel, Corey Thomas, e1000-devel, John Ronciak, linux-ppp,
Ron Mercer, Sreenivasa Honnur, Andrew Morton, Sorbica Shieh,
Larry Finger
On Mon, Dec 17, 2007 at 11:40:08AM -0800, Joe Perches wrote:
>
> Signed-off-by: Joe Perches <joe@perches.com>
> ---
> drivers/net/wireless/atmel.c | 2 +-
> drivers/net/wireless/bcm43xx/bcm43xx_debugfs.h | 2 +-
> drivers/net/wireless/ipw2200.c | 2 +-
> drivers/net/wireless/iwlwifi/iwl-4965.c | 2 +-
> drivers/net/wireless/libertas/cmd.c | 4 ++--
> drivers/net/wireless/libertas/scan.c | 4 ++--
> drivers/net/wireless/netwave_cs.c | 2 +-
> drivers/net/wireless/orinoco.h | 2 +-
> drivers/net/wireless/ray_cs.c | 2 +-
> drivers/net/wireless/rt2x00/rt2x00reg.h | 2 +-
> drivers/net/wireless/rt2x00/rt2x00usb.h | 6 +++---
> drivers/net/wireless/rt2x00/rt73usb.c | 2 +-
> drivers/net/wireless/wavelan_cs.c | 2 +-
> drivers/net/wireless/zd1211rw/zd_chip.h | 4 ++--
ACK
--
John W. Linville
linville@tuxdriver.com
^ permalink raw reply [flat|nested] 34+ messages in thread
* Re: [PATCH] drivers/net/: Spelling fixes
@ 2007-12-17 20:43 ` John W. Linville
0 siblings, 0 replies; 34+ messages in thread
From: John W. Linville @ 2007-12-17 20:43 UTC (permalink / raw)
To: Joe Perches
Cc: Pavel Roskin, David Gibson, orinoco-devel, Yi Zhu,
Jaroslav Kysela, linuxppc-dev, Paul Mackerras, Peter De Shrijver,
Rastapur Santosh, bonding-devel, Andy Gospodarek, Amit S. Kale,
ipw2100-devel, atl1-devel, Chris Snook, Stefano Brivio,
libertas-dev, Dan Williams, Jesse Brandeburg, Manish Lachwani,
Jean Tourrilhes, Jeff Kirsher, Arnaldo Carvalho de Melo
On Mon, Dec 17, 2007 at 11:40:08AM -0800, Joe Perches wrote:
>
> Signed-off-by: Joe Perches <joe@perches.com>
> ---
> drivers/net/wireless/atmel.c | 2 +-
> drivers/net/wireless/bcm43xx/bcm43xx_debugfs.h | 2 +-
> drivers/net/wireless/ipw2200.c | 2 +-
> drivers/net/wireless/iwlwifi/iwl-4965.c | 2 +-
> drivers/net/wireless/libertas/cmd.c | 4 ++--
> drivers/net/wireless/libertas/scan.c | 4 ++--
> drivers/net/wireless/netwave_cs.c | 2 +-
> drivers/net/wireless/orinoco.h | 2 +-
> drivers/net/wireless/ray_cs.c | 2 +-
> drivers/net/wireless/rt2x00/rt2x00reg.h | 2 +-
> drivers/net/wireless/rt2x00/rt2x00usb.h | 6 +++---
> drivers/net/wireless/rt2x00/rt73usb.c | 2 +-
> drivers/net/wireless/wavelan_cs.c | 2 +-
> drivers/net/wireless/zd1211rw/zd_chip.h | 4 ++--
ACK
--
John W. Linville
linville@tuxdriver.com
-------------------------------------------------------------------------
SF.Net email is sponsored by:
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services
for just about anything Open Source.
http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace
^ permalink raw reply [flat|nested] 34+ messages in thread
* Re: [PATCH] drivers/net/: Spelling fixes
@ 2007-12-17 21:15 ` David Woodhouse
0 siblings, 0 replies; 34+ messages in thread
From: David Woodhouse @ 2007-12-17 21:15 UTC (permalink / raw)
To: Joe Perches
Cc: Pavel Roskin, David Gibson, orinoco-devel, Yi Zhu,
Jaroslav Kysela, linuxppc-dev, Paul Mackerras, Peter De Shrijver,
Rastapur Santosh, bonding-devel, Andy Gospodarek, Amit S. Kale,
ipw2100-devel, atl1-devel, Chris Snook, libertas-dev,
Dan Williams, Jesse Brandeburg, Manish Lachwani, Jean Tourrilhes,
Jeff Kirsher, Arnaldo Carvalho de Melo, Francois Romieu,
Daniel Drake, Li Yang, Jeff Garzik, Jeb Cramer, Chad Tindel,
orinoco-users, Jay Cliburn, Samuel Ortiz, Sivakumar Subramani,
Jesse Huang, Mike Phillips, rt2400-devel, Ulrich Kunitz,
ipw3945-devel, cbe-oss-dev, Alexander Indenbaum, Adam Fritzler,
Auke Kok, James Ketrenos, Stefano Brivio, Haavard Skinnemoen,
tulip-users, netdev, Ramkrishna Vepa, linux-wireless,
linux-kernel, Corey Thomas, e1000-devel, John Ronciak, linux-ppp,
Ron Mercer, Sreenivasa Honnur, Andrew Morton, Sorbica Shieh,
Larry Finger
On Mon, 2007-12-17 at 11:40 -0800, Joe Perches wrote:
> drivers/net/wireless/libertas/cmd.c | 4 ++--
> drivers/net/wireless/libertas/scan.c | 4 ++--
I will apply these to the libertas tree; please remove them from any
resend of this patch.
If we were using git properly, it wouldn't matter -- I could just let
the patch go in upstream and when it gets merged, it'll be fine. But for
some reason we don't use git for network driver development; we pretend
it's the 1990s and we deal with sets of patches instead. So having this
simple change applied in an upstream tree would cause lots of pain, as
far as I can tell.
--
dwmw2
^ permalink raw reply [flat|nested] 34+ messages in thread
* Re: [PATCH] drivers/net/: Spelling fixes
@ 2007-12-17 21:15 ` David Woodhouse
0 siblings, 0 replies; 34+ messages in thread
From: David Woodhouse @ 2007-12-17 21:15 UTC (permalink / raw)
To: Joe Perches
Cc: Pavel Roskin, Eugene Surovegin, Geoff Levand, David Gibson,
orinoco-devel, Yi Zhu, Jaroslav Kysela, linuxppc-dev,
Paul Mackerras, Peter De Shrijver, Rastapur Santosh,
bonding-devel, Andy Gospodarek, Amit S. Kale, ipw2100-devel,
atl1-devel, Chris Snook, Masakazu Mokuno, libertas-dev,
Dan Williams, Dale Farnsworth, Jay Vosburgh, Jesse Brandeburg,
Manish
On Mon, 2007-12-17 at 11:40 -0800, Joe Perches wrote:
> drivers/net/wireless/libertas/cmd.c | 4 ++--
> drivers/net/wireless/libertas/scan.c | 4 ++--
I will apply these to the libertas tree; please remove them from any
resend of this patch.
If we were using git properly, it wouldn't matter -- I could just let
the patch go in upstream and when it gets merged, it'll be fine. But for
some reason we don't use git for network driver development; we pretend
it's the 1990s and we deal with sets of patches instead. So having this
simple change applied in an upstream tree would cause lots of pain, as
far as I can tell.
--
dwmw2
-------------------------------------------------------------------------
SF.Net email is sponsored by:
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services
for just about anything Open Source.
http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace
^ permalink raw reply [flat|nested] 34+ messages in thread