* Dell Optiplex GX620 BIOS A11 dmidecode kernel 2.6.22
@ 2007-07-09 9:49 Michal Semler
2008-01-18 23:34 ` Len Brown
0 siblings, 1 reply; 3+ messages in thread
From: Michal Semler @ 2007-07-09 9:49 UTC (permalink / raw)
To: linux-acpi
Linux version 2.6.22 (root@optiplex) (gcc version 4.1.2 20061115
(prerelease) (Debian 4.1.1-21)) #1 SMP PREEMPT Mon Jul 9 11:26:03 CEST 2007
Command line: BOOT_IMAGE=Linux ro root=802 no_fwh_detect
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003f686c00 (usable)
BIOS-e820: 000000003f686c00 - 000000003f688c00 (ACPI NVS)
BIOS-e820: 000000003f688c00 - 000000003f68ac00 (ACPI data)
BIOS-e820: 000000003f68ac00 - 0000000040000000 (reserved)
BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved)
BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
Entering add_active_range(0, 0, 160) 0 entries of 256 used
Entering add_active_range(0, 256, 259718) 1 entries of 256 used
end_pfn_map = 1048576
DMI 2.3 present.
ACPI: RSDP 000FEB00, 0024 (r2 DELL )
ACPI: XSDT 000FD257, 005C (r1 DELL GX620 7 ASL 61)
ACPI: FACP 000FD34F, 00F4 (r3 DELL GX620 7 ASL 61)
ACPI: DSDT FFFD4952, 3DA4 (r1 DELL dt_ex 1000 INTL 20050309)
ACPI: FACS 3F686C00, 0040
ACPI: SSDT FFFD8815, 00AA (r1 DELL st_ex 1000 INTL 20050309)
ACPI: APIC 000FD443, 0072 (r1 DELL GX620 7 ASL 61)
ACPI: BOOT 000FD4B5, 0028 (r1 DELL GX620 7 ASL 61)
ACPI: ASF! 000FD4DD, 0067 (r16 DELL GX620 7 ASL 61)
ACPI: MCFG 000FD544, 003E (r1 DELL GX620 7 ASL 61)
ACPI: HPET 000FD582, 0038 (r1 DELL GX620 7 ASL 61)
Entering add_active_range(0, 0, 160) 0 entries of 256 used
Entering add_active_range(0, 256, 259718) 1 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
DMA32 4096 -> 1048576
Normal 1048576 -> 1048576
early_node_map[2] active PFN ranges
0: 0 -> 160
0: 256 -> 259718
On node 0 totalpages: 259622
DMA zone: 56 pages used for memmap
DMA zone: 986 pages reserved
DMA zone: 2958 pages, LIFO batch:0
DMA32 zone: 3494 pages used for memmap
DMA32 zone: 252128 pages, LIFO batch:31
Normal zone: 0 pages used for memmap
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to flat
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 50000000 (gap: 40000000:b0000000)
SMP: Allowing 4 CPUs, 2 hotplug CPUs
PERCPU: Allocating 37256 bytes of per cpu data
Built 1 zonelists. Total pages: 255086
Kernel command line: BOOT_IMAGE=Linux ro root=802 no_fwh_detect
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
time.c: Detected 2793.070 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Checking aperture...
Memory: 1018384k/1038872k available (2155k kernel code, 20016k reserved,
1016k data, 200k init)
SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1
Calibrating delay using timer specific routine.. 5589.91 BogoMIPS
(lpj=2794955)
Mount-cache hash table entries: 256
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
using mwait in idle threads.
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM1)
SMP alternatives: switching to UP code
ACPI: Core revision 20070126
Using local APIC timer interrupts.
result 12468989
Detected 12.468 MHz APIC timer.
SMP alternatives: switching to SMP code
Booting processor 1/2 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 5586.12 BogoMIPS
(lpj=2793062)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU1: Thermal monitoring enabled (TM1)
Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
migration_cost=11
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Found Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub
without MMCONFIG support.
PCI: Using configuration type 1
ACPI: System BIOS is requesting _OSI(Linux)
ACPI: Please test with "acpi_osi=!Linux"
Please send dmidecode to linux-acpi@vger.kernel.org
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
PCI quirk: region 0880-08bf claimed by ICH6 GPIO
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
libata version 2.21 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
report
PCI-GART: No AMD northbridge found.
pnp: 00:01: ioport range 0x800-0x85f has been reserved
pnp: 00:01: ioport range 0xc00-0xc7f has been reserved
pnp: 00:01: ioport range 0x860-0x8ff could not be reserved
Time: tsc clocksource has been installed.
pnp: 00:09: iomem range 0x0-0x9ffff could not be reserved
pnp: 00:09: iomem range 0x100000-0xffffff could not be reserved
pnp: 00:09: iomem range 0x1000000-0x3f686bff could not be reserved
pnp: 00:09: iomem range 0xf0000-0xfffff could not be reserved
pnp: 00:0a: ioport range 0x100-0x1fe could not be reserved
pnp: 00:0a: ioport range 0x200-0x277 has been reserved
pnp: 00:0a: ioport range 0x280-0x2e7 has been reserved
pnp: 00:0a: ioport range 0x2f0-0x2f7 has been reserved
pnp: 00:0a: ioport range 0x300-0x377 could not be reserved
pnp: 00:0a: ioport range 0x380-0x3bb has been reserved
pnp: 00:0a: ioport range 0x3c0-0x3e7 could not be reserved
pnp: 00:0a: ioport range 0x3f6-0x3f7 could not be reserved
pnp: 00:0a: iomem range 0xf0000000-0xf3ffffff could not be reserved
pnp: 00:0a: iomem range 0xfeda0000-0xfedacfff has been reserved
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: fe900000-fe9fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.0
IO window: disabled.
MEM window: fe800000-fe8fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.1
IO window: disabled.
MEM window: fe700000-fe7fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.1 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
TCP established hash table entries: 131072 (order: 9, 3145728 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Simple Boot Flag at 0x7a set to 0x1
IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
audit: initializing netlink socket (disabled)
audit(1183973268.598:1): initialized
audit: cannot initialize inotify handle
Total HugeTLB memory allocated, 0
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
Boot video device is 0000:00:02.0
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0:pcie00]
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.1:pcie00]
Allocate Port Service[0000:00:1c.1:pcie02]
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input1
ACPI: Power Button (CM) [VBTN]
ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not
present [20070126]
ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not
present [20070126]
Linux agpgart interface v0.102 (c) Dave Jones
agpgart: Detected an Intel 945G Chipset.
agpgart: Detected 7932K stolen memory.
agpgart: AGP aperture is 256M @ 0xe0000000
intelfb: Framebuffer driver for Intel(R)
830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM chipsets
intelfb: Version 0.9.4
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
intelfb: 00:02.0: Intel(R) 945G, aperture size 256MB, stolen memory 7932kB
intelfb: Mode is interlaced.
intelfb: Initial video mode is 1024x768-32@70.
Console: switching to colour frame buffer device 128x48
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
ata_piix 0000:00:1f.1: version 2.11
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1f.1 to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma
0x000000000001ffa0 irq 14
ata2: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma
0x000000000001ffa8 irq 15
ata1.00: ATAPI: SONY DVD-ROM DDU1615, FDS2, max UDMA/33
ata1.00: configured for UDMA/33
ata2: port disabled. ignoring.
scsi 0:0:0:0: CD-ROM SONY DVD-ROM DDU1615 FDS2 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 4x/48x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sr 0:0:0:0: Attached scsi generic sg0 type 5
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0x000000000001fe00 ctl 0x000000000001fe12 bmdma
0x000000000001fea0 irq 20
ata4: SATA max UDMA/133 cmd 0x000000000001fe20 ctl 0x000000000001fe32 bmdma
0x000000000001fea8 irq 20
ata3.00: ATA-7: SAMSUNG HD080HJ/P, ZH100-34, max UDMA7
ata3.00: 156250000 sectors, multi 8: LBA48 NCQ (depth 0/32)
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD080HJ/ ZH10 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 156250000 512-byte hardware sectors (80000 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sd 2:0:0:0: [sda] 156250000 512-byte hardware sectors (80000 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sda: sda1 sda2 sda3
sd 2:0:0:0: [sda] Attached SCSI disk
sd 2:0:0:0: Attached scsi generic sg1 type 0
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 200k freed
Real Time Clock Driver v1.12ac
parport_pc 00:07: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
tg3.c:v3.77 (May 31, 2007)
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:02:00.0 to 64
eth0: Tigon3 [partno(BCM5751PKFBG) rev 4001 PHY(5750)] (PCI Express)
10/100/1000Base-T Ethernet 00:19:b9:1d:40:ea
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
eth0: dma_rwctrl[76180000] dma_mask[64-bit]
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000ff80
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
input: PC Speaker as /class/input/input2
Floppy drive(s): fd0 is 1.44M
iTCO_vendor_support: vendor-support=0
FDC 0 is a post-1991 82077
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware
iTCO_wdt: No card detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 22, io base 0x0000ff60
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
intel_rng: Firmware space is locked read-only. <4>intel_rng: If you can't or
don't want to <4>intel_rng: disable this in firmware setup, and
<4>intel_rng: if
you are certain that your <4>intel_rng: system has a functional
RNG, try<4>intel_rng: using the 'no_fwh_detect' option.
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000ff20
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 2-1: new low speed USB device using uhci_hcd and address 2
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 21, io mem 0xffa80800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1e.2 to 64
intel8x0_measure_ac97_clock: measured 51357 usecs
intel8x0: clocking to 48000
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
usb 2-1: new low speed USB device using uhci_hcd and address 3
usb 2-1: configuration #1 chosen from 1 choice
input: USB Optical Mouse as /class/input/input3
input: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.1-1
usb 2-2: new full speed USB device using uhci_hcd and address 4
usb 2-2: configuration #1 chosen from 1 choice
input: Dell Dell Smart Card Reader Keyboard as /class/input/input4
input: USB HID v1.11 Keyboard [Dell Dell Smart Card Reader Keyboard] on
usb-0000:00:1d.1-2
Adding 979956k swap on /dev/sda3. Priority:-1 extents:1 across:979956k
EXT3 FS on sda2, internal journal
loop: module loaded
fuse init (API version 7.8)
lp0: using parport0 (interrupt-driven).
lp0: console ready
tg3: eth0: Link is up at 1000 Mbps, full duplex.
tg3: eth0: Flow control is off for TX and off for RX.
[drm] Initialized drm 1.1.0 20060810
[drm] Initialized i915 1.6.0 20060119 on minor 0
So here you have your dmidecode, guys ;)
optiplex:/boot# dmidecode
# dmidecode 2.8
SMBIOS 2.3 present.
73 structures occupying 2590 bytes.
Table at 0x000F0450.
Handle 0xDA00, DMI type 218, 53 bytes
OEM-specific Type
Header and Data:
DA 35 00 DA B2 00 17 0B 0E 38 00 00 80 00 80 01
00 02 80 02 80 01 00 00 A0 00 A0 01 00 58 00 58
00 01 00 59 00 59 00 01 00 05 80 05 80 01 00 FF
FF 00 00 00 00
Handle 0xDA01, DMI type 218, 35 bytes
OEM-specific Type
Header and Data:
DA 23 01 DA B2 00 17 0B 0E 38 00 10 F5 10 F5 00
00 11 F5 11 F5 00 00 12 F5 12 F5 00 00 FF FF 00
00 00 00
Handle 0x0000, DMI type 0, 20 bytes
BIOS Information
Vendor: Dell Inc.
Version: A11
Release Date: 11/30/2006
Address: 0xF0000
Runtime Size: 64 kB
ROM Size: 512 kB
Characteristics:
PCI is supported
PNP is supported
APM is supported
BIOS is upgradeable
BIOS shadowing is allowed
Boot from CD is supported
Selectable boot is supported
EDD is supported
Japanese floppy for Toshiba 1.2 MB is supported (int 13h)
Print screen service is supported (int 5h)
8042 keyboard services are supported (int 9h)
Serial services are supported (int 14h)
Printer services are supported (int 17h)
ACPI is supported
USB legacy is supported
LS-120 boot is supported
BIOS boot specification is supported
Function key-initiated network boot is supported
Handle 0x0100, DMI type 1, 25 bytes
System Information
Manufacturer: Dell Inc.
Product Name: OptiPlex GX620
Version: Not Specified
Serial Number: JLG4Q2J
UUID: 44454C4C-4C00-1047-8034-CAC04F51324A
Wake-up Type: Power Switch
Handle 0x0200, DMI type 2, 8 bytes
Base Board Information
Manufacturer: Dell Inc.
Product Name: 0FH884
Version:
Serial Number: ..CN1374071302OZ.
Handle 0x0300, DMI type 3, 13 bytes
Chassis Information
Manufacturer: Dell Inc.
Type: Desktop
Lock: Not Present
Version: Not Specified
Serial Number: JLG4Q2J
Asset Tag:
Boot-up State: Safe
Power Supply State: Safe
Thermal State: Safe
Security Status: None
Handle 0x0400, DMI type 4, 32 bytes
Processor Information
Socket Designation: Microprocessor
Type: Central Processor
Family: Pentium 4
Manufacturer: Intel
ID: 49 0F 00 00 FF FB EB BF
Signature: Type 0, Family 15, Model 4, Stepping 9
Flags:
FPU (Floating-point unit on-chip)
VME (Virtual mode extension)
DE (Debugging extension)
PSE (Page size extension)
TSC (Time stamp counter)
MSR (Model specific registers)
PAE (Physical address extension)
MCE (Machine check exception)
CX8 (CMPXCHG8 instruction supported)
APIC (On-chip APIC hardware supported)
SEP (Fast system call)
MTRR (Memory type range registers)
PGE (Page global enable)
MCA (Machine check architecture)
CMOV (Conditional move instruction supported)
PAT (Page attribute table)
PSE-36 (36-bit page size extension)
CLFSH (CLFLUSH instruction supported)
DS (Debug store)
ACPI (ACPI supported)
MMX (MMX technology supported)
FXSR (Fast floating-point save and restore)
SSE (Streaming SIMD extensions)
SSE2 (Streaming SIMD extensions 2)
SS (Self-snoop)
HTT (Hyper-threading technology)
TM (Thermal monitor supported)
PBE (Pending break enabled)
Version: Not Specified
Voltage: 1.4 V
External Clock: 800 MHz
Max Speed: 4000 MHz
Current Speed: 2800 MHz
Status: Populated, Enabled
Upgrade: ZIF Socket
L1 Cache Handle: 0x0700
L2 Cache Handle: 0x0701
L3 Cache Handle: Not Provided
Handle 0x0700, DMI type 7, 19 bytes
Cache Information
Socket Designation: Not Specified
Configuration: Enabled, Not Socketed, Level 1
Operational Mode: Write Back
Location: Internal
Installed Size: 16 KB
Maximum Size: 16 KB
Supported SRAM Types:
Other
Installed SRAM Type: Other
Speed: Unknown
Error Correction Type: None
System Type: Data
Associativity: 8-way Set-associative
Handle 0x0701, DMI type 7, 19 bytes
Cache Information
Socket Designation: Not Specified
Configuration: Enabled, Not Socketed, Level 2
Operational Mode: Varies With Memory Address
Location: Internal
Installed Size: 1024 KB
Maximum Size: 1024 KB
Supported SRAM Types:
Other
Installed SRAM Type: Other
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Unified
Associativity: 8-way Set-associative
Handle 0x0800, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: PARALLEL
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: DB-25 female
Port Type: Parallel Port PS/2
Handle 0x0801, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: SERIAL1
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: DB-9 male
Port Type: Serial Port 16550A Compatible
Handle 0x0802, DMI type 126, 9 bytes
Inactive
Handle 0x0803, DMI type 126, 9 bytes
Inactive
Handle 0x0804, DMI type 126, 9 bytes
Inactive
Handle 0x0805, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB1
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0806, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB2
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0807, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB3
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0808, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB4
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0809, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB5
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x080A, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB6
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x080B, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB7
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x080C, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB8
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x080D, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: ENET
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: RJ-45
Port Type: Network Port
Handle 0x080E, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: MIC
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Mini Jack (headphones)
Port Type: Audio Port
Handle 0x080F, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: LINE-OUT
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Mini Jack (headphones)
Port Type: Audio Port
Handle 0x0810, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: LINE-IN
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Mini Jack (headphones)
Port Type: Audio Port
Handle 0x0811, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: HP-OUT
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Mini Jack (headphones)
Port Type: Audio Port
Handle 0x0812, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: MONITOR
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: DB-15 female
Port Type: Video Port
Handle 0x090A, DMI type 9, 13 bytes
System Slot Information
Designation: PEG
Type: x16 PCI Express
Current Usage: Available
Length: Long
Characteristics:
3.3 V is provided
PME signal is supported
Handle 0x0901, DMI type 126, 13 bytes
Inactive
Handle 0x0902, DMI type 9, 13 bytes
System Slot Information
Designation: SLOT2
Type: 32-bit PCI
Current Usage: Available
Length: Long
ID: 2
Characteristics:
5.0 V is provided
3.3 V is provided
PME signal is supported
Handle 0x0903, DMI type 9, 13 bytes
System Slot Information
Designation: SLOT3
Type: 32-bit PCI
Current Usage: Available
Length: Long
ID: 3
Characteristics:
5.0 V is provided
3.3 V is provided
PME signal is supported
Handle 0x0904, DMI type 126, 13 bytes
Inactive
Handle 0x0905, DMI type 126, 13 bytes
Inactive
Handle 0x0906, DMI type 126, 13 bytes
Inactive
Handle 0x0A00, DMI type 10, 6 bytes
On Board Device Information
Type: Video
Status: Enabled
Description: Intel Graphics Media Accelerator 950
Handle 0x0A02, DMI type 10, 6 bytes
On Board Device Information
Type: Ethernet
Status: Enabled
Description: Broadcom 5751 NetXtreme Gigabit Controller
Handle 0x0A03, DMI type 10, 6 bytes
On Board Device Information
Type: Sound
Status: Enabled
Description: AC'97 Audio Controller
Handle 0x0B00, DMI type 11, 5 bytes
OEM Strings
String 1: www.dell.com
Handle 0x0D00, DMI type 13, 22 bytes
BIOS Language Information
Installable Languages: 1
en|US|iso8859-1
Currently Installed Language: en|US|iso8859-1
Handle 0x0F00, DMI type 15, 29 bytes
System Event Log
Area Length: 2049 bytes
Header Start Offset: 0x0000
Header Length: 16 bytes
Data Start Offset: 0x0010
Access Method: Memory-mapped physical 32-bit address
Access Address: 0xFFF81000
Status: Valid, Not Full
Change Token: 0x00000011
Header Format: Type 1
Supported Log Type Descriptors: 3
Descriptor 1: POST error
Data Format 1: POST results bitmap
Descriptor 2: System limit exceeded
Data Format 2: System management
Descriptor 3: Log area reset/cleared
Data Format 3: None
Handle 0x1000, DMI type 16, 15 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 4 GB
Error Information Handle: Not Provided
Number Of Devices: 4
Handle 0x1100, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x1000
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 512 MB
Form Factor: DIMM
Set: None
Locator: DIMM_1
Bank Locator: Not Specified
Type: DDR
Type Detail: Synchronous
Speed: 533 MHz (1.9 ns)
Manufacturer: 4000000000000000
Serial Number: 075826B0
Asset Tag: Not Specified
Part Number: V916764K24QAFW-E4
Handle 0x1101, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x1000
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: No Module Installed
Form Factor: DIMM
Set: None
Locator: DIMM_3
Bank Locator: Not Specified
Type: DDR
Type Detail: Synchronous
Speed: 533 MHz (1.9 ns)
Manufacturer: FFFFFFFFFFFFFFFF
Serial Number: FFFFFFFF
Asset Tag: Not Specified
Part Number:
Handle 0x1102, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x1000
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 512 MB
Form Factor: DIMM
Set: None
Locator: DIMM_2
Bank Locator: Not Specified
Type: DDR
Type Detail: Synchronous
Speed: 533 MHz (1.9 ns)
Manufacturer: 4000000000000000
Serial Number: 085826B0
Asset Tag: Not Specified
Part Number: V916764K24QAFW-E4
Handle 0x1103, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x1000
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: No Module Installed
Form Factor: DIMM
Set: None
Locator: DIMM_4
Bank Locator: Not Specified
Type: DDR
Type Detail: Synchronous
Speed: 533 MHz (1.9 ns)
Manufacturer: FFFFFFFFFFFFFFFF
Serial Number: FFFFFFFF
Asset Tag: Not Specified
Part Number:
Handle 0x1301, DMI type 19, 15 bytes
Memory Array Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0003FFFFFFF
Range Size: 1 GB
Physical Array Handle: 0x1000
Partition Width: 0
Handle 0x1402, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0001FFFFFFF
Range Size: 512 MB
Physical Device Handle: 0x1100
Memory Array Mapped Address Handle: 0x1301
Partition Row Position: 1
Handle 0x1403, DMI type 126, 19 bytes
Inactive
Handle 0x1404, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00020000000
Ending Address: 0x0003FFFFFFF
Range Size: 512 MB
Physical Device Handle: 0x1102
Memory Array Mapped Address Handle: 0x1301
Partition Row Position: 1
Handle 0x1405, DMI type 126, 19 bytes
Inactive
Handle 0x1800, DMI type 24, 5 bytes
Hardware Security
Power-On Password Status: Enabled
Keyboard Password Status: Not Implemented
Administrator Password Status: Enabled
Front Panel Reset Status: Not Implemented
Handle 0x1900, DMI type 25, 9 bytes
System Power Controls
Next Scheduled Power-on: *-* 00:00:00
Handle 0x1B10, DMI type 27, 12 bytes
Cooling Device
Type: Fan
Status: OK
OEM-specific Information: 0x0000DD00
Handle 0x1B11, DMI type 126, 12 bytes
Inactive
Handle 0x1B12, DMI type 126, 12 bytes
Inactive
Handle 0x2000, DMI type 32, 11 bytes
System Boot Information
Status: No errors detected
Handle 0x8100, DMI type 129, 8 bytes
OEM-specific Type
Header and Data:
81 08 00 81 01 01 02 01
Strings:
Intel_ASF
Dell_ASF_002
Handle 0x8800, DMI type 136, 6 bytes
OEM-specific Type
Header and Data:
88 06 00 88 5A 5A
Handle 0xD000, DMI type 208, 10 bytes
OEM-specific Type
Header and Data:
D0 0A 00 D0 01 03 FE 00 AD 01
Handle 0xD100, DMI type 209, 12 bytes
OEM-specific Type
Header and Data:
D1 0C 00 D1 78 03 07 03 04 0F 80 05
Handle 0xD200, DMI type 210, 12 bytes
OEM-specific Type
Header and Data:
D2 0C 00 D2 F8 03 04 03 06 80 04 05
Handle 0xD201, DMI type 126, 12 bytes
Inactive
Handle 0xD400, DMI type 212, 252 bytes
OEM-specific Type
Header and Data:
D4 FC 00 D4 70 00 71 00 00 10 2D 2E 42 00 11 FE
01 43 00 11 FE 00 0F 00 25 FC 00 10 00 25 FC 01
11 00 25 FC 02 12 00 25 FC 03 00 00 25 F3 00 00
00 25 F3 04 00 00 25 F3 08 00 00 25 F3 0C 07 00
23 8F 00 08 00 23 F3 00 09 00 23 F3 04 0A 00 23
F3 08 0B 00 23 8F 10 0C 00 23 8F 20 0E 00 23 8F
30 0D 00 23 8C 40 A6 00 23 8C 41 A7 00 23 8C 42
05 01 22 FD 02 06 01 22 FD 00 4E 01 28 DF 00 4F
01 28 DF 20 8C 00 22 FE 00 8D 00 22 FE 01 9B 00
25 3F 40 9C 00 25 3F 00 09 01 25 3F 80 A1 00 26
F3 00 A2 00 26 F3 08 A3 00 26 F3 04 9F 00 26 FD
02 A0 00 26 FD 00 9D 00 11 FB 04 9E 00 11 FB 00
54 01 23 7F 00 55 01 23 7F 80 5C 00 78 BF 40 5D
00 78 BF 00 04 80 78 F5 0A 01 A0 78 F5 00 93 00
7B 7F 80 94 00 7B 7F 00 8A 00 37 DF 20 8B 00 37
DF 00 03 C0 67 00 05 FF FF 00 00 00
Handle 0xD401, DMI type 212, 207 bytes
OEM-specific Type
Header and Data:
D4 CF 01 D4 70 00 71 00 03 40 59 6D 2D 00 59 FC
02 2E 00 59 FC 00 6E 00 59 FC 01 27 01 59 FC 03
28 00 59 3F 00 29 00 59 3F 40 2A 00 59 3F 80 2B
00 5A 00 00 2C 00 5B 00 00 55 00 59 F3 00 6D 00
59 F3 04 8E 00 59 F3 08 8F 00 59 F3 00 1C 00 55
FB 04 1D 00 55 FB 00 19 00 55 E7 00 1A 00 55 E7
08 1B 00 55 E7 10 23 00 55 7F 00 22 00 55 7F 80
F5 00 58 BF 40 F6 00 58 BF 00 EB 00 55 FE 00 EA
00 55 FE 01 01 01 51 3F 00 02 01 51 3F 40 03 01
51 3F 80 04 01 51 3F C0 40 01 54 EF 00 41 01 54
EF 10 42 01 54 F7 00 43 01 54 F7 08 4A 01 54 FB
00 4B 01 54 FB 04 4C 01 53 7F 00 4D 01 53 7F 80
68 01 56 BF 00 69 01 56 BF 40 FF FF 00 00 00
Handle 0xD402, DMI type 212, 117 bytes
OEM-specific Type
Header and Data:
D4 75 02 D4 70 00 71 00 00 10 2D 2E 2D 01 21 FE
01 2E 01 21 FE 00 2F 01 21 7F 00 30 01 21 7F 80
97 00 22 FB 00 98 00 22 FB 04 90 00 11 CF 00 91
00 11 CF 20 92 00 11 CF 10 E2 00 27 7F 00 E3 00
27 7F 80 E4 00 27 BF 00 E5 00 27 BF 40 D1 00 22
7F 80 D2 00 22 7F 00 3E 01 22 BF 40 3F 01 22 BF
00 36 01 21 F1 02 2B 01 11 7F 80 2C 01 11 7F 00
FF FF 00 00 00
Handle 0xD403, DMI type 212, 97 bytes
OEM-specific Type
Header and Data:
D4 61 03 D4 70 00 71 00 03 40 59 6D 17 01 52 FE
00 18 01 52 FE 01 19 01 52 FB 00 1A 01 52 FB 04
1B 01 52 FD 00 1C 01 52 FD 02 1D 01 52 F7 00 1E
01 52 F7 08 09 40 52 EF 00 08 40 52 EF 10 0B 40
52 DF 00 0A 40 52 DF 20 0D 40 52 BF 00 0C 40 52
BF 40 0F 40 52 7F 00 0E 40 52 7F 80 FF FF 00 00
00
Handle 0xD800, DMI type 216, 9 bytes
OEM-specific Type
Header and Data:
D8 09 00 D8 01 02 01 F0 03
Strings:
Intel(r)Lakeport-G PCI Accelerated SVGA BIOS
1215 PC Dev 03/11/2005 13:36:49
Handle 0xDD00, DMI type 221, 19 bytes
OEM-specific Type
Header and Data:
DD 13 00 DD 00 01 00 00 00 10 F5 00 00 00 00 00
00 00 00
Handle 0xDD01, DMI type 221, 19 bytes
OEM-specific Type
Header and Data:
DD 13 01 DD 00 01 00 00 00 11 F5 00 00 00 00 00
00 00 00
Handle 0xDD02, DMI type 221, 19 bytes
OEM-specific Type
Header and Data:
DD 13 02 DD 00 01 00 00 00 12 F5 00 00 00 00 00
00 00 00
Handle 0xDE00, DMI type 222, 13 bytes
OEM-specific Type
Header and Data:
DE 0D 00 DE C1 01 00 00 07 05 02 10 07
Handle 0x7F00, DMI type 127, 4 bytes
End Of Table
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: Dell Optiplex GX620 BIOS A11 dmidecode kernel 2.6.22
2007-07-09 9:49 Dell Optiplex GX620 BIOS A11 dmidecode kernel 2.6.22 Michal Semler
@ 2008-01-18 23:34 ` Len Brown
0 siblings, 0 replies; 3+ messages in thread
From: Len Brown @ 2008-01-18 23:34 UTC (permalink / raw)
To: Michal Semler; +Cc: linux-acpi
On Monday 09 July 2007 05:49, Michal Semler wrote:
> System Information
> Manufacturer: Dell Inc.
> Product Name: OptiPlex GX620
> Version: Not Specified
> Serial Number: JLG4Q2J
> UUID: 44454C4C-4C00-1047-8034-CAC04F51324A
> Wake-up Type: Power Switch
>
> Handle 0x0200, DMI type 2, 8 bytes
> Base Board Information
> Manufacturer: Dell Inc.
> Product Name: 0FH884
Michal, I didn't see an acpidump in that e-mail, can you send it to me?
also, do you notice any _functional_ difference after booting with
"acpi_osi=Linux"
vs
"acpi_osi=!Linux"?
thanks,
-Len
-
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: Dell Optiplex GX620 BIOS A11 dmidecode kernel 2.6.22
@ 2007-07-09 11:27 Michal Semler
0 siblings, 0 replies; 3+ messages in thread
From: Michal Semler @ 2007-07-09 11:27 UTC (permalink / raw)
To: linux-acpi
Hi,
attaching also acpidump for Dell Optiplex GX620 BIOS A11.
Michal
Michal Semler writes:
> Linux version 2.6.22 (root@optiplex) (gcc version 4.1.2 20061115
> (prerelease) (Debian 4.1.1-21)) #1 SMP PREEMPT Mon Jul 9 11:26:03 CEST
> 2007
> Command line: BOOT_IMAGE=Linux ro root=802 no_fwh_detect
> BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003f686c00 (usable)
> BIOS-e820: 000000003f686c00 - 000000003f688c00 (ACPI NVS)
> BIOS-e820: 000000003f688c00 - 000000003f68ac00 (ACPI data)
> BIOS-e820: 000000003f68ac00 - 0000000040000000 (reserved)
> BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved)
> BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
> Entering add_active_range(0, 0, 160) 0 entries of 256 used
> Entering add_active_range(0, 256, 259718) 1 entries of 256 used
> end_pfn_map = 1048576
> DMI 2.3 present.
> ACPI: RSDP 000FEB00, 0024 (r2 DELL )
> ACPI: XSDT 000FD257, 005C (r1 DELL GX620 7 ASL 61)
> ACPI: FACP 000FD34F, 00F4 (r3 DELL GX620 7 ASL 61)
> ACPI: DSDT FFFD4952, 3DA4 (r1 DELL dt_ex 1000 INTL 20050309)
> ACPI: FACS 3F686C00, 0040
> ACPI: SSDT FFFD8815, 00AA (r1 DELL st_ex 1000 INTL 20050309)
> ACPI: APIC 000FD443, 0072 (r1 DELL GX620 7 ASL 61)
> ACPI: BOOT 000FD4B5, 0028 (r1 DELL GX620 7 ASL 61)
> ACPI: ASF! 000FD4DD, 0067 (r16 DELL GX620 7 ASL 61)
> ACPI: MCFG 000FD544, 003E (r1 DELL GX620 7 ASL 61)
> ACPI: HPET 000FD582, 0038 (r1 DELL GX620 7 ASL 61)
> Entering add_active_range(0, 0, 160) 0 entries of 256 used
> Entering add_active_range(0, 256, 259718) 1 entries of 256 used
> Zone PFN ranges:
> DMA 0 -> 4096
> DMA32 4096 -> 1048576
> Normal 1048576 -> 1048576
> early_node_map[2] active PFN ranges
> 0: 0 -> 160
> 0: 256 -> 259718
> On node 0 totalpages: 259622
> DMA zone: 56 pages used for memmap
> DMA zone: 986 pages reserved
> DMA zone: 2958 pages, LIFO batch:0
> DMA32 zone: 3494 pages used for memmap
> DMA32 zone: 252128 pages, LIFO batch:31
> Normal zone: 0 pages used for memmap
> ACPI: PM-Timer IO Port: 0x808
> ACPI: Local APIC address 0xfee00000
> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
> Processor #0 (Bootup-CPU)
> ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
> Processor #1
> ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] disabled)
> ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
> ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
> ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
> IOAPIC[0]: apic_id 8, address 0xfec00000, GSI 0-23
> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> ACPI: IRQ0 used by override.
> ACPI: IRQ2 used by override.
> ACPI: IRQ9 used by override.
> Setting APIC routing to flat
> ACPI: HPET id: 0x8086a201 base: 0xfed00000
> Using ACPI (MADT) for SMP configuration information
> swsusp: Registered nosave memory region: 00000000000a0000 -
> 00000000000f0000
> swsusp: Registered nosave memory region: 00000000000f0000 -
> 0000000000100000
> Allocating PCI resources starting at 50000000 (gap: 40000000:b0000000)
> SMP: Allowing 4 CPUs, 2 hotplug CPUs
> PERCPU: Allocating 37256 bytes of per cpu data
> Built 1 zonelists. Total pages: 255086
> Kernel command line: BOOT_IMAGE=Linux ro root=802 no_fwh_detect
> Initializing CPU#0
> PID hash table entries: 4096 (order: 12, 32768 bytes)
> time.c: Detected 2793.070 MHz processor.
> Console: colour VGA+ 80x25
> Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
> Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
> Checking aperture...
> Memory: 1018384k/1038872k available (2155k kernel code, 20016k reserved,
> 1016k data, 200k init)
> SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1
> Calibrating delay using timer specific routine.. 5589.91 BogoMIPS
> (lpj=2794955)
> Mount-cache hash table entries: 256
> CPU: Trace cache: 12K uops, L1 D cache: 16K
> CPU: L2 cache: 1024K
> using mwait in idle threads.
> CPU: Physical Processor ID: 0
> CPU: Processor Core ID: 0
> CPU0: Thermal monitoring enabled (TM1)
> SMP alternatives: switching to UP code
> ACPI: Core revision 20070126
> Using local APIC timer interrupts.
> result 12468989
> Detected 12.468 MHz APIC timer.
> SMP alternatives: switching to SMP code
> Booting processor 1/2 APIC 0x1
> Initializing CPU#1
> Calibrating delay using timer specific routine.. 5586.12 BogoMIPS
> (lpj=2793062)
> CPU: Trace cache: 12K uops, L1 D cache: 16K
> CPU: L2 cache: 1024K
> CPU: Physical Processor ID: 0
> CPU: Processor Core ID: 0
> CPU1: Thermal monitoring enabled (TM1)
> Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09
> checking TSC synchronization [CPU#0 -> CPU#1]: passed.
> Brought up 2 CPUs
> migration_cost=11
> NET: Registered protocol family 16
> ACPI: bus type pci registered
> PCI: Found Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub
> without MMCONFIG support.
> PCI: Using configuration type 1
> ACPI: System BIOS is requesting _OSI(Linux)
> ACPI: Please test with "acpi_osi=!Linux"
> Please send dmidecode to linux-acpi@vger.kernel.org
> ACPI: Interpreter enabled
> ACPI: (supports S0 S1 S3 S4 S5)
> ACPI: Using IOAPIC for interrupt routing
> ACPI: PCI Root Bridge [PCI0] (0000:00)
> PCI: Probing PCI hardware (bus 00)
> PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
> PCI quirk: region 0880-08bf claimed by ICH6 GPIO
> PCI: Transparent bridge - 0000:00:1e.0
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI3._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
> ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
> ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15)
> ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 15)
> ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0,
> disabled.
> ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 15)
> ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 15)
> ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15)
> ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15)
> Linux Plug and Play Support v0.97 (c) Adam Belay
> pnp: PnP ACPI init
> ACPI: bus type pnp registered
> pnp: PnP ACPI: found 11 devices
> ACPI: ACPI bus type pnp unregistered
> SCSI subsystem initialized
> libata version 2.21 loaded.
> usbcore: registered new interface driver usbfs
> usbcore: registered new interface driver hub
> usbcore: registered new device driver usb
> PCI: Using ACPI for IRQ routing
> PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
> report
> PCI-GART: No AMD northbridge found.
> pnp: 00:01: ioport range 0x800-0x85f has been reserved
> pnp: 00:01: ioport range 0xc00-0xc7f has been reserved
> pnp: 00:01: ioport range 0x860-0x8ff could not be reserved
> Time: tsc clocksource has been installed.
> pnp: 00:09: iomem range 0x0-0x9ffff could not be reserved
> pnp: 00:09: iomem range 0x100000-0xffffff could not be reserved
> pnp: 00:09: iomem range 0x1000000-0x3f686bff could not be reserved
> pnp: 00:09: iomem range 0xf0000-0xfffff could not be reserved
> pnp: 00:0a: ioport range 0x100-0x1fe could not be reserved
> pnp: 00:0a: ioport range 0x200-0x277 has been reserved
> pnp: 00:0a: ioport range 0x280-0x2e7 has been reserved
> pnp: 00:0a: ioport range 0x2f0-0x2f7 has been reserved
> pnp: 00:0a: ioport range 0x300-0x377 could not be reserved
> pnp: 00:0a: ioport range 0x380-0x3bb has been reserved
> pnp: 00:0a: ioport range 0x3c0-0x3e7 could not be reserved
> pnp: 00:0a: ioport range 0x3f6-0x3f7 could not be reserved
> pnp: 00:0a: iomem range 0xf0000000-0xf3ffffff could not be reserved
> pnp: 00:0a: iomem range 0xfeda0000-0xfedacfff has been reserved
> PCI: Bridge: 0000:00:01.0
> IO window: disabled.
> MEM window: fe900000-fe9fffff
> PREFETCH window: disabled.
> PCI: Bridge: 0000:00:1c.0
> IO window: disabled.
> MEM window: fe800000-fe8fffff
> PREFETCH window: disabled.
> PCI: Bridge: 0000:00:1c.1
> IO window: disabled.
> MEM window: fe700000-fe7fffff
> PREFETCH window: disabled.
> PCI: Bridge: 0000:00:1e.0
> IO window: disabled.
> MEM window: disabled.
> PREFETCH window: disabled.
> ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
> PCI: Setting latency timer of device 0000:00:01.0 to 64
> ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
> PCI: Setting latency timer of device 0000:00:1c.0 to 64
> ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
> PCI: Setting latency timer of device 0000:00:1c.1 to 64
> PCI: Setting latency timer of device 0000:00:1e.0 to 64
> NET: Registered protocol family 2
> IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
> TCP established hash table entries: 131072 (order: 9, 3145728 bytes)
> TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
> TCP: Hash tables configured (established 131072 bind 65536)
> TCP reno registered
> Simple Boot Flag at 0x7a set to 0x1
> IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
> audit: initializing netlink socket (disabled)
> audit(1183973268.598:1): initialized
> audit: cannot initialize inotify handle
> Total HugeTLB memory allocated, 0
> io scheduler noop registered
> io scheduler anticipatory registered (default)
> io scheduler deadline registered
> io scheduler cfq registered
> Boot video device is 0000:00:02.0
> PCI: Setting latency timer of device 0000:00:01.0 to 64
> assign_interrupt_mode Found MSI capability
> Allocate Port Service[0000:00:01.0:pcie00]
> PCI: Setting latency timer of device 0000:00:1c.0 to 64
> assign_interrupt_mode Found MSI capability
> Allocate Port Service[0000:00:1c.0:pcie00]
> Allocate Port Service[0000:00:1c.0:pcie02]
> PCI: Setting latency timer of device 0000:00:1c.1 to 64
> assign_interrupt_mode Found MSI capability
> Allocate Port Service[0000:00:1c.1:pcie00]
> Allocate Port Service[0000:00:1c.1:pcie02]
> input: Power Button (FF) as /class/input/input0
> ACPI: Power Button (FF) [PWRF]
> input: Power Button (CM) as /class/input/input1
> ACPI: Power Button (CM) [VBTN]
> ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is
> not present [20070126]
> ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is
> not present [20070126]
> Linux agpgart interface v0.102 (c) Dave Jones
> agpgart: Detected an Intel 945G Chipset.
> agpgart: Detected 7932K stolen memory.
> agpgart: AGP aperture is 256M @ 0xe0000000
> intelfb: Framebuffer driver for Intel(R)
> 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM chipsets
> intelfb: Version 0.9.4
> ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
> intelfb: 00:02.0: Intel(R) 945G, aperture size 256MB, stolen memory 7932kB
> intelfb: Mode is interlaced.
> intelfb: Initial video mode is 1024x768-32@70.
> Console: switching to colour frame buffer device 128x48
> Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
> 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
> ata_piix 0000:00:1f.1: version 2.11
> ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
> PCI: Setting latency timer of device 0000:00:1f.1 to 64
> scsi0 : ata_piix
> scsi1 : ata_piix
> ata1: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6
> bmdma 0x000000000001ffa0 irq 14
> ata2: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376
> bmdma 0x000000000001ffa8 irq 15
> ata1.00: ATAPI: SONY DVD-ROM DDU1615, FDS2, max UDMA/33
> ata1.00: configured for UDMA/33
> ata2: port disabled. ignoring.
> scsi 0:0:0:0: CD-ROM SONY DVD-ROM DDU1615 FDS2 PQ: 0 ANSI:
> 5
> sr0: scsi3-mmc drive: 4x/48x cd/rw xa/form2 cdda tray
> Uniform CD-ROM driver Revision: 3.20
> sr 0:0:0:0: Attached scsi CD-ROM sr0
> sr 0:0:0:0: Attached scsi generic sg0 type 5
> ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
> ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 20 (level, low) -> IRQ 20
> PCI: Setting latency timer of device 0000:00:1f.2 to 64
> scsi2 : ata_piix
> scsi3 : ata_piix
> ata3: SATA max UDMA/133 cmd 0x000000000001fe00 ctl 0x000000000001fe12
> bmdma 0x000000000001fea0 irq 20
> ata4: SATA max UDMA/133 cmd 0x000000000001fe20 ctl 0x000000000001fe32
> bmdma 0x000000000001fea8 irq 20
> ata3.00: ATA-7: SAMSUNG HD080HJ/P, ZH100-34, max UDMA7
> ata3.00: 156250000 sectors, multi 8: LBA48 NCQ (depth 0/32)
> ata3.00: configured for UDMA/133
> scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD080HJ/ ZH10 PQ: 0 ANSI:
> 5
> sd 2:0:0:0: [sda] 156250000 512-byte hardware sectors (80000 MB)
> sd 2:0:0:0: [sda] Write Protect is off
> sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
> sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
> support DPO or FUA
> sd 2:0:0:0: [sda] 156250000 512-byte hardware sectors (80000 MB)
> sd 2:0:0:0: [sda] Write Protect is off
> sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
> sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
> support DPO or FUA
> sda: sda1 sda2 sda3
> sd 2:0:0:0: [sda] Attached SCSI disk
> sd 2:0:0:0: Attached scsi generic sg1 type 0
> PNP: No PS/2 controller found. Probing ports directly.
> serio: i8042 KBD port at 0x60,0x64 irq 1
> serio: i8042 AUX port at 0x60,0x64 irq 12
> mice: PS/2 mouse device common for all mice
> usbcore: registered new interface driver usbhid
> drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
> TCP cubic registered
> Initializing XFRM netlink socket
> NET: Registered protocol family 1
> NET: Registered protocol family 17
> kjournald starting. Commit interval 5 seconds
> EXT3-fs: mounted filesystem with ordered data mode.
> VFS: Mounted root (ext3 filesystem) readonly.
> Freeing unused kernel memory: 200k freed
> Real Time Clock Driver v1.12ac
> parport_pc 00:07: reported by Plug and Play ACPI
> parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
> tg3.c:v3.77 (May 31, 2007)
> ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
> PCI: Setting latency timer of device 0000:02:00.0 to 64
> eth0: Tigon3 [partno(BCM5751PKFBG) rev 4001 PHY(5750)] (PCI Express)
> 10/100/1000Base-T Ethernet 00:19:b9:1d:40:ea
> eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
> eth0: dma_rwctrl[76180000] dma_mask[64-bit]
> USB Universal Host Controller Interface driver v3.0
> ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 21
> PCI: Setting latency timer of device 0000:00:1d.0 to 64
> uhci_hcd 0000:00:1d.0: UHCI Host Controller
> uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
> uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000ff80
> usb usb1: configuration #1 chosen from 1 choice
> hub 1-0:1.0: USB hub found
> hub 1-0:1.0: 2 ports detected
> input: PC Speaker as /class/input/input2
> Floppy drive(s): fd0 is 1.44M
> iTCO_vendor_support: vendor-support=0
> FDC 0 is a post-1991 82077
> iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
> iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware
> iTCO_wdt: No card detected
> ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 22
> PCI: Setting latency timer of device 0000:00:1d.1 to 64
> uhci_hcd 0000:00:1d.1: UHCI Host Controller
> uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
> uhci_hcd 0000:00:1d.1: irq 22, io base 0x0000ff60
> usb usb2: configuration #1 chosen from 1 choice
> hub 2-0:1.0: USB hub found
> hub 2-0:1.0: 2 ports detected
> intel_rng: Firmware space is locked read-only. <4>intel_rng: If you can't
> or
> don't want to <4>intel_rng: disable this in firmware setup, and
> <4>intel_rng: if
> you are certain that your <4>intel_rng: system has a functional
> RNG, try<4>intel_rng: using the 'no_fwh_detect' option.
> ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
> PCI: Setting latency timer of device 0000:00:1d.2 to 64
> uhci_hcd 0000:00:1d.2: UHCI Host Controller
> uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
> uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
> usb usb3: configuration #1 chosen from 1 choice
> hub 3-0:1.0: USB hub found
> hub 3-0:1.0: 2 ports detected
> ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 23
> PCI: Setting latency timer of device 0000:00:1d.3 to 64
> uhci_hcd 0000:00:1d.3: UHCI Host Controller
> uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
> uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000ff20
> usb usb4: configuration #1 chosen from 1 choice
> hub 4-0:1.0: USB hub found
> hub 4-0:1.0: 2 ports detected
> usb 2-1: new low speed USB device using uhci_hcd and address 2
> ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 21
> PCI: Setting latency timer of device 0000:00:1d.7 to 64
> ehci_hcd 0000:00:1d.7: EHCI Host Controller
> ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
> ehci_hcd 0000:00:1d.7: debug port 1
> PCI: cache line size of 128 is not supported by device 0000:00:1d.7
> ehci_hcd 0000:00:1d.7: irq 21, io mem 0xffa80800
> ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
> usb usb5: configuration #1 chosen from 1 choice
> hub 5-0:1.0: USB hub found
> hub 5-0:1.0: 8 ports detected
> ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 23 (level, low) -> IRQ 23
> PCI: Setting latency timer of device 0000:00:1e.2 to 64
> intel8x0_measure_ac97_clock: measured 51357 usecs
> intel8x0: clocking to 48000
> ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
> usb 2-1: new low speed USB device using uhci_hcd and address 3
> usb 2-1: configuration #1 chosen from 1 choice
> input: USB Optical Mouse as /class/input/input3
> input: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.1-1
> usb 2-2: new full speed USB device using uhci_hcd and address 4
> usb 2-2: configuration #1 chosen from 1 choice
> input: Dell Dell Smart Card Reader Keyboard as /class/input/input4
> input: USB HID v1.11 Keyboard [Dell Dell Smart Card Reader Keyboard] on
> usb-0000:00:1d.1-2
> Adding 979956k swap on /dev/sda3. Priority:-1 extents:1 across:979956k
> EXT3 FS on sda2, internal journal
> loop: module loaded
> fuse init (API version 7.8)
> lp0: using parport0 (interrupt-driven).
> lp0: console ready
> tg3: eth0: Link is up at 1000 Mbps, full duplex.
> tg3: eth0: Flow control is off for TX and off for RX.
> [drm] Initialized drm 1.1.0 20060810
> [drm] Initialized i915 1.6.0 20060119 on minor 0
>
> So here you have your dmidecode, guys ;)
>
>
> optiplex:/boot# dmidecode
> # dmidecode 2.8
> SMBIOS 2.3 present.
> 73 structures occupying 2590 bytes.
> Table at 0x000F0450.
>
> Handle 0xDA00, DMI type 218, 53 bytes
> OEM-specific Type
> Header and Data:
> DA 35 00 DA B2 00 17 0B 0E 38 00 00 80 00 80 01
> 00 02 80 02 80 01 00 00 A0 00 A0 01 00 58 00 58
> 00 01 00 59 00 59 00 01 00 05 80 05 80 01 00 FF
> FF 00 00 00 00
>
> Handle 0xDA01, DMI type 218, 35 bytes
> OEM-specific Type
> Header and Data:
> DA 23 01 DA B2 00 17 0B 0E 38 00 10 F5 10 F5 00
> 00 11 F5 11 F5 00 00 12 F5 12 F5 00 00 FF FF 00
> 00 00 00
>
> Handle 0x0000, DMI type 0, 20 bytes
> BIOS Information
> Vendor: Dell Inc.
> Version: A11
> Release Date: 11/30/2006
> Address: 0xF0000
> Runtime Size: 64 kB
> ROM Size: 512 kB
> Characteristics:
> PCI is supported
> PNP is supported
> APM is supported
> BIOS is upgradeable
> BIOS shadowing is allowed
> Boot from CD is supported
> Selectable boot is supported
> EDD is supported
> Japanese floppy for Toshiba 1.2 MB is supported (int 13h)
> Print screen service is supported (int 5h)
> 8042 keyboard services are supported (int 9h)
> Serial services are supported (int 14h)
> Printer services are supported (int 17h)
> ACPI is supported
> USB legacy is supported
> LS-120 boot is supported
> BIOS boot specification is supported
> Function key-initiated network boot is supported
>
> Handle 0x0100, DMI type 1, 25 bytes
> System Information
> Manufacturer: Dell Inc.
> Product Name: OptiPlex GX620
> Version: Not Specified
> Serial Number: JLG4Q2J
> UUID: 44454C4C-4C00-1047-8034-CAC04F51324A
> Wake-up Type: Power Switch
>
> Handle 0x0200, DMI type 2, 8 bytes
> Base Board Information
> Manufacturer: Dell Inc.
> Product Name: 0FH884
> Version:
> Serial Number: ..CN1374071302OZ.
>
> Handle 0x0300, DMI type 3, 13 bytes
> Chassis Information
> Manufacturer: Dell Inc.
> Type: Desktop
> Lock: Not Present
> Version: Not Specified
> Serial Number: JLG4Q2J
> Asset Tag:
> Boot-up State: Safe
> Power Supply State: Safe
> Thermal State: Safe
> Security Status: None
>
> Handle 0x0400, DMI type 4, 32 bytes
> Processor Information
> Socket Designation: Microprocessor
> Type: Central Processor
> Family: Pentium 4
> Manufacturer: Intel
> ID: 49 0F 00 00 FF FB EB BF
> Signature: Type 0, Family 15, Model 4, Stepping 9
> Flags:
> FPU (Floating-point unit on-chip)
> VME (Virtual mode extension)
> DE (Debugging extension)
> PSE (Page size extension)
> TSC (Time stamp counter)
> MSR (Model specific registers)
> PAE (Physical address extension)
> MCE (Machine check exception)
> CX8 (CMPXCHG8 instruction supported)
> APIC (On-chip APIC hardware supported)
> SEP (Fast system call)
> MTRR (Memory type range registers)
> PGE (Page global enable)
> MCA (Machine check architecture)
> CMOV (Conditional move instruction supported)
> PAT (Page attribute table)
> PSE-36 (36-bit page size extension)
> CLFSH (CLFLUSH instruction supported)
> DS (Debug store)
> ACPI (ACPI supported)
> MMX (MMX technology supported)
> FXSR (Fast floating-point save and restore)
> SSE (Streaming SIMD extensions)
> SSE2 (Streaming SIMD extensions 2)
> SS (Self-snoop)
> HTT (Hyper-threading technology)
> TM (Thermal monitor supported)
> PBE (Pending break enabled)
> Version: Not Specified
> Voltage: 1.4 V
> External Clock: 800 MHz
> Max Speed: 4000 MHz
> Current Speed: 2800 MHz
> Status: Populated, Enabled
> Upgrade: ZIF Socket
> L1 Cache Handle: 0x0700
> L2 Cache Handle: 0x0701
> L3 Cache Handle: Not Provided
>
> Handle 0x0700, DMI type 7, 19 bytes
> Cache Information
> Socket Designation: Not Specified
> Configuration: Enabled, Not Socketed, Level 1
> Operational Mode: Write Back
> Location: Internal
> Installed Size: 16 KB
> Maximum Size: 16 KB
> Supported SRAM Types:
> Other
> Installed SRAM Type: Other
> Speed: Unknown
> Error Correction Type: None
> System Type: Data
> Associativity: 8-way Set-associative
>
> Handle 0x0701, DMI type 7, 19 bytes
> Cache Information
> Socket Designation: Not Specified
> Configuration: Enabled, Not Socketed, Level 2
> Operational Mode: Varies With Memory Address
> Location: Internal
> Installed Size: 1024 KB
> Maximum Size: 1024 KB
> Supported SRAM Types:
> Other
> Installed SRAM Type: Other
> Speed: Unknown
> Error Correction Type: Single-bit ECC
> System Type: Unified
> Associativity: 8-way Set-associative
>
> Handle 0x0800, DMI type 8, 9 bytes
> Port Connector Information
> Internal Reference Designator: PARALLEL
> Internal Connector Type: None
> External Reference Designator: Not Specified
> External Connector Type: DB-25 female
> Port Type: Parallel Port PS/2
>
> Handle 0x0801, DMI type 8, 9 bytes
> Port Connector Information
> Internal Reference Designator: SERIAL1
> Internal Connector Type: None
> External Reference Designator: Not Specified
> External Connector Type: DB-9 male
> Port Type: Serial Port 16550A Compatible
>
> Handle 0x0802, DMI type 126, 9 bytes
> Inactive
>
> Handle 0x0803, DMI type 126, 9 bytes
> Inactive
>
> Handle 0x0804, DMI type 126, 9 bytes
> Inactive
>
> Handle 0x0805, DMI type 8, 9 bytes
> Port Connector Information
> Internal Reference Designator: USB1
> Internal Connector Type: None
> External Reference Designator: Not Specified
> External Connector Type: Access Bus (USB)
> Port Type: USB
>
> Handle 0x0806, DMI type 8, 9 bytes
> Port Connector Information
> Internal Reference Designator: USB2
> Internal Connector Type: None
> External Reference Designator: Not Specified
> External Connector Type: Access Bus (USB)
> Port Type: USB
>
> Handle 0x0807, DMI type 8, 9 bytes
> Port Connector Information
> Internal Reference Designator: USB3
> Internal Connector Type: None
> External Reference Designator: Not Specified
> External Connector Type: Access Bus (USB)
> Port Type: USB
>
> Handle 0x0808, DMI type 8, 9 bytes
> Port Connector Information
> Internal Reference Designator: USB4
> Internal Connector Type: None
> External Reference Designator: Not Specified
> External Connector Type: Access Bus (USB)
> Port Type: USB
>
> Handle 0x0809, DMI type 8, 9 bytes
> Port Connector Information
> Internal Reference Designator: USB5
> Internal Connector Type: None
> External Reference Designator: Not Specified
> External Connector Type: Access Bus (USB)
> Port Type: USB
>
> Handle 0x080A, DMI type 8, 9 bytes
> Port Connector Information
> Internal Reference Designator: USB6
> Internal Connector Type: None
> External Reference Designator: Not Specified
> External Connector Type: Access Bus (USB)
> Port Type: USB
>
> Handle 0x080B, DMI type 8, 9 bytes
> Port Connector Information
> Internal Reference Designator: USB7
> Internal Connector Type: None
> External Reference Designator: Not Specified
> External Connector Type: Access Bus (USB)
> Port Type: USB
>
> Handle 0x080C, DMI type 8, 9 bytes
> Port Connector Information
> Internal Reference Designator: USB8
> Internal Connector Type: None
> External Reference Designator: Not Specified
> External Connector Type: Access Bus (USB)
> Port Type: USB
>
> Handle 0x080D, DMI type 8, 9 bytes
> Port Connector Information
> Internal Reference Designator: ENET
> Internal Connector Type: None
> External Reference Designator: Not Specified
> External Connector Type: RJ-45
> Port Type: Network Port
>
> Handle 0x080E, DMI type 8, 9 bytes
> Port Connector Information
> Internal Reference Designator: MIC
> Internal Connector Type: None
> External Reference Designator: Not Specified
> External Connector Type: Mini Jack (headphones)
> Port Type: Audio Port
>
> Handle 0x080F, DMI type 8, 9 bytes
> Port Connector Information
> Internal Reference Designator: LINE-OUT
> Internal Connector Type: None
> External Reference Designator: Not Specified
> External Connector Type: Mini Jack (headphones)
> Port Type: Audio Port
>
> Handle 0x0810, DMI type 8, 9 bytes
> Port Connector Information
> Internal Reference Designator: LINE-IN
> Internal Connector Type: None
> External Reference Designator: Not Specified
> External Connector Type: Mini Jack (headphones)
> Port Type: Audio Port
>
> Handle 0x0811, DMI type 8, 9 bytes
> Port Connector Information
> Internal Reference Designator: HP-OUT
> Internal Connector Type: None
> External Reference Designator: Not Specified
> External Connector Type: Mini Jack (headphones)
> Port Type: Audio Port
>
> Handle 0x0812, DMI type 8, 9 bytes
> Port Connector Information
> Internal Reference Designator: MONITOR
> Internal Connector Type: None
> External Reference Designator: Not Specified
> External Connector Type: DB-15 female
> Port Type: Video Port
>
> Handle 0x090A, DMI type 9, 13 bytes
> System Slot Information
> Designation: PEG
> Type: x16 PCI Express
> Current Usage: Available
> Length: Long
> Characteristics:
> 3.3 V is provided
> PME signal is supported
>
> Handle 0x0901, DMI type 126, 13 bytes
> Inactive
>
> Handle 0x0902, DMI type 9, 13 bytes
> System Slot Information
> Designation: SLOT2
> Type: 32-bit PCI
> Current Usage: Available
> Length: Long
> ID: 2
> Characteristics:
> 5.0 V is provided
> 3.3 V is provided
> PME signal is supported
>
> Handle 0x0903, DMI type 9, 13 bytes
> System Slot Information
> Designation: SLOT3
> Type: 32-bit PCI
> Current Usage: Available
> Length: Long
> ID: 3
> Characteristics:
> 5.0 V is provided
> 3.3 V is provided
> PME signal is supported
>
> Handle 0x0904, DMI type 126, 13 bytes
> Inactive
>
> Handle 0x0905, DMI type 126, 13 bytes
> Inactive
>
> Handle 0x0906, DMI type 126, 13 bytes
> Inactive
>
> Handle 0x0A00, DMI type 10, 6 bytes
> On Board Device Information
> Type: Video
> Status: Enabled
> Description: Intel Graphics Media Accelerator 950
>
> Handle 0x0A02, DMI type 10, 6 bytes
> On Board Device Information
> Type: Ethernet
> Status: Enabled
> Description: Broadcom 5751 NetXtreme Gigabit Controller
>
> Handle 0x0A03, DMI type 10, 6 bytes
> On Board Device Information
> Type: Sound
> Status: Enabled
> Description: AC'97 Audio Controller
>
> Handle 0x0B00, DMI type 11, 5 bytes
> OEM Strings
> String 1: www.dell.com
>
> Handle 0x0D00, DMI type 13, 22 bytes
> BIOS Language Information
> Installable Languages: 1
> en|US|iso8859-1
> Currently Installed Language: en|US|iso8859-1
>
> Handle 0x0F00, DMI type 15, 29 bytes
> System Event Log
> Area Length: 2049 bytes
> Header Start Offset: 0x0000
> Header Length: 16 bytes
> Data Start Offset: 0x0010
> Access Method: Memory-mapped physical 32-bit address
> Access Address: 0xFFF81000
> Status: Valid, Not Full
> Change Token: 0x00000011
> Header Format: Type 1
> Supported Log Type Descriptors: 3
> Descriptor 1: POST error
> Data Format 1: POST results bitmap
> Descriptor 2: System limit exceeded
> Data Format 2: System management
> Descriptor 3: Log area reset/cleared
> Data Format 3: None
>
> Handle 0x1000, DMI type 16, 15 bytes
> Physical Memory Array
> Location: System Board Or Motherboard
> Use: System Memory
> Error Correction Type: None
> Maximum Capacity: 4 GB
> Error Information Handle: Not Provided
> Number Of Devices: 4
>
> Handle 0x1100, DMI type 17, 27 bytes
> Memory Device
> Array Handle: 0x1000
> Error Information Handle: Not Provided
> Total Width: 64 bits
> Data Width: 64 bits
> Size: 512 MB
> Form Factor: DIMM
> Set: None
> Locator: DIMM_1
> Bank Locator: Not Specified
> Type: DDR
> Type Detail: Synchronous
> Speed: 533 MHz (1.9 ns)
> Manufacturer: 4000000000000000
> Serial Number: 075826B0
> Asset Tag: Not Specified
> Part Number: V916764K24QAFW-E4
>
> Handle 0x1101, DMI type 17, 27 bytes
> Memory Device
> Array Handle: 0x1000
> Error Information Handle: Not Provided
> Total Width: 64 bits
> Data Width: 64 bits
> Size: No Module Installed
> Form Factor: DIMM
> Set: None
> Locator: DIMM_3
> Bank Locator: Not Specified
> Type: DDR
> Type Detail: Synchronous
> Speed: 533 MHz (1.9 ns)
> Manufacturer: FFFFFFFFFFFFFFFF
> Serial Number: FFFFFFFF
> Asset Tag: Not Specified
> Part Number:
>
> Handle 0x1102, DMI type 17, 27 bytes
> Memory Device
> Array Handle: 0x1000
> Error Information Handle: Not Provided
> Total Width: 64 bits
> Data Width: 64 bits
> Size: 512 MB
> Form Factor: DIMM
> Set: None
> Locator: DIMM_2
> Bank Locator: Not Specified
> Type: DDR
> Type Detail: Synchronous
> Speed: 533 MHz (1.9 ns)
> Manufacturer: 4000000000000000
> Serial Number: 085826B0
> Asset Tag: Not Specified
> Part Number: V916764K24QAFW-E4
>
> Handle 0x1103, DMI type 17, 27 bytes
> Memory Device
> Array Handle: 0x1000
> Error Information Handle: Not Provided
> Total Width: 64 bits
> Data Width: 64 bits
> Size: No Module Installed
> Form Factor: DIMM
> Set: None
> Locator: DIMM_4
> Bank Locator: Not Specified
> Type: DDR
> Type Detail: Synchronous
> Speed: 533 MHz (1.9 ns)
> Manufacturer: FFFFFFFFFFFFFFFF
> Serial Number: FFFFFFFF
> Asset Tag: Not Specified
> Part Number:
>
> Handle 0x1301, DMI type 19, 15 bytes
> Memory Array Mapped Address
> Starting Address: 0x00000000000
> Ending Address: 0x0003FFFFFFF
> Range Size: 1 GB
> Physical Array Handle: 0x1000
> Partition Width: 0
>
> Handle 0x1402, DMI type 20, 19 bytes
> Memory Device Mapped Address
> Starting Address: 0x00000000000
> Ending Address: 0x0001FFFFFFF
> Range Size: 512 MB
> Physical Device Handle: 0x1100
> Memory Array Mapped Address Handle: 0x1301
> Partition Row Position: 1
>
> Handle 0x1403, DMI type 126, 19 bytes
> Inactive
>
> Handle 0x1404, DMI type 20, 19 bytes
> Memory Device Mapped Address
> Starting Address: 0x00020000000
> Ending Address: 0x0003FFFFFFF
> Range Size: 512 MB
> Physical Device Handle: 0x1102
> Memory Array Mapped Address Handle: 0x1301
> Partition Row Position: 1
>
> Handle 0x1405, DMI type 126, 19 bytes
> Inactive
>
> Handle 0x1800, DMI type 24, 5 bytes
> Hardware Security
> Power-On Password Status: Enabled
> Keyboard Password Status: Not Implemented
> Administrator Password Status: Enabled
> Front Panel Reset Status: Not Implemented
>
> Handle 0x1900, DMI type 25, 9 bytes
> System Power Controls
> Next Scheduled Power-on: *-* 00:00:00
>
> Handle 0x1B10, DMI type 27, 12 bytes
> Cooling Device
> Type: Fan
> Status: OK
> OEM-specific Information: 0x0000DD00
>
> Handle 0x1B11, DMI type 126, 12 bytes
> Inactive
>
> Handle 0x1B12, DMI type 126, 12 bytes
> Inactive
>
> Handle 0x2000, DMI type 32, 11 bytes
> System Boot Information
> Status: No errors detected
>
> Handle 0x8100, DMI type 129, 8 bytes
> OEM-specific Type
> Header and Data:
> 81 08 00 81 01 01 02 01
> Strings:
> Intel_ASF
> Dell_ASF_002
>
> Handle 0x8800, DMI type 136, 6 bytes
> OEM-specific Type
> Header and Data:
> 88 06 00 88 5A 5A
>
> Handle 0xD000, DMI type 208, 10 bytes
> OEM-specific Type
> Header and Data:
> D0 0A 00 D0 01 03 FE 00 AD 01
>
> Handle 0xD100, DMI type 209, 12 bytes
> OEM-specific Type
> Header and Data:
> D1 0C 00 D1 78 03 07 03 04 0F 80 05
>
> Handle 0xD200, DMI type 210, 12 bytes
> OEM-specific Type
> Header and Data:
> D2 0C 00 D2 F8 03 04 03 06 80 04 05
>
> Handle 0xD201, DMI type 126, 12 bytes
> Inactive
>
> Handle 0xD400, DMI type 212, 252 bytes
> OEM-specific Type
> Header and Data:
> D4 FC 00 D4 70 00 71 00 00 10 2D 2E 42 00 11 FE
> 01 43 00 11 FE 00 0F 00 25 FC 00 10 00 25 FC 01
> 11 00 25 FC 02 12 00 25 FC 03 00 00 25 F3 00 00
> 00 25 F3 04 00 00 25 F3 08 00 00 25 F3 0C 07 00
> 23 8F 00 08 00 23 F3 00 09 00 23 F3 04 0A 00 23
> F3 08 0B 00 23 8F 10 0C 00 23 8F 20 0E 00 23 8F
> 30 0D 00 23 8C 40 A6 00 23 8C 41 A7 00 23 8C 42
> 05 01 22 FD 02 06 01 22 FD 00 4E 01 28 DF 00 4F
> 01 28 DF 20 8C 00 22 FE 00 8D 00 22 FE 01 9B 00
> 25 3F 40 9C 00 25 3F 00 09 01 25 3F 80 A1 00 26
> F3 00 A2 00 26 F3 08 A3 00 26 F3 04 9F 00 26 FD
> 02 A0 00 26 FD 00 9D 00 11 FB 04 9E 00 11 FB 00
> 54 01 23 7F 00 55 01 23 7F 80 5C 00 78 BF 40 5D
> 00 78 BF 00 04 80 78 F5 0A 01 A0 78 F5 00 93 00
> 7B 7F 80 94 00 7B 7F 00 8A 00 37 DF 20 8B 00 37
> DF 00 03 C0 67 00 05 FF FF 00 00 00
>
> Handle 0xD401, DMI type 212, 207 bytes
> OEM-specific Type
> Header and Data:
> D4 CF 01 D4 70 00 71 00 03 40 59 6D 2D 00 59 FC
> 02 2E 00 59 FC 00 6E 00 59 FC 01 27 01 59 FC 03
> 28 00 59 3F 00 29 00 59 3F 40 2A 00 59 3F 80 2B
> 00 5A 00 00 2C 00 5B 00 00 55 00 59 F3 00 6D 00
> 59 F3 04 8E 00 59 F3 08 8F 00 59 F3 00 1C 00 55
> FB 04 1D 00 55 FB 00 19 00 55 E7 00 1A 00 55 E7
> 08 1B 00 55 E7 10 23 00 55 7F 00 22 00 55 7F 80
> F5 00 58 BF 40 F6 00 58 BF 00 EB 00 55 FE 00 EA
> 00 55 FE 01 01 01 51 3F 00 02 01 51 3F 40 03 01
> 51 3F 80 04 01 51 3F C0 40 01 54 EF 00 41 01 54
> EF 10 42 01 54 F7 00 43 01 54 F7 08 4A 01 54 FB
> 00 4B 01 54 FB 04 4C 01 53 7F 00 4D 01 53 7F 80
> 68 01 56 BF 00 69 01 56 BF 40 FF FF 00 00 00
>
> Handle 0xD402, DMI type 212, 117 bytes
> OEM-specific Type
> Header and Data:
> D4 75 02 D4 70 00 71 00 00 10 2D 2E 2D 01 21 FE
> 01 2E 01 21 FE 00 2F 01 21 7F 00 30 01 21 7F 80
> 97 00 22 FB 00 98 00 22 FB 04 90 00 11 CF 00 91
> 00 11 CF 20 92 00 11 CF 10 E2 00 27 7F 00 E3 00
> 27 7F 80 E4 00 27 BF 00 E5 00 27 BF 40 D1 00 22
> 7F 80 D2 00 22 7F 00 3E 01 22 BF 40 3F 01 22 BF
> 00 36 01 21 F1 02 2B 01 11 7F 80 2C 01 11 7F 00
> FF FF 00 00 00
>
> Handle 0xD403, DMI type 212, 97 bytes
> OEM-specific Type
> Header and Data:
> D4 61 03 D4 70 00 71 00 03 40 59 6D 17 01 52 FE
> 00 18 01 52 FE 01 19 01 52 FB 00 1A 01 52 FB 04
> 1B 01 52 FD 00 1C 01 52 FD 02 1D 01 52 F7 00 1E
> 01 52 F7 08 09 40 52 EF 00 08 40 52 EF 10 0B 40
> 52 DF 00 0A 40 52 DF 20 0D 40 52 BF 00 0C 40 52
> BF 40 0F 40 52 7F 00 0E 40 52 7F 80 FF FF 00 00
> 00
>
> Handle 0xD800, DMI type 216, 9 bytes
> OEM-specific Type
> Header and Data:
> D8 09 00 D8 01 02 01 F0 03
> Strings:
> Intel(r)Lakeport-G PCI Accelerated SVGA BIOS
> 1215 PC Dev 03/11/2005 13:36:49
>
> Handle 0xDD00, DMI type 221, 19 bytes
> OEM-specific Type
> Header and Data:
> DD 13 00 DD 00 01 00 00 00 10 F5 00 00 00 00 00
> 00 00 00
>
> Handle 0xDD01, DMI type 221, 19 bytes
> OEM-specific Type
> Header and Data:
> DD 13 01 DD 00 01 00 00 00 11 F5 00 00 00 00 00
> 00 00 00
>
> Handle 0xDD02, DMI type 221, 19 bytes
> OEM-specific Type
> Header and Data:
> DD 13 02 DD 00 01 00 00 00 12 F5 00 00 00 00 00
> 00 00 00
>
> Handle 0xDE00, DMI type 222, 13 bytes
> OEM-specific Type
> Header and Data:
> DE 0D 00 DE C1 01 00 00 07 05 02 10 07
>
> Handle 0x7F00, DMI type 127, 4 bytes
> End Of Table
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2008-01-18 23:34 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-07-09 9:49 Dell Optiplex GX620 BIOS A11 dmidecode kernel 2.6.22 Michal Semler
2008-01-18 23:34 ` Len Brown
-- strict thread matches above, loose matches on Subject: below --
2007-07-09 11:27 Michal Semler
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.