* dmidecode output for ubuntu
@ 2007-11-01 23:09 Dan Barnes
2008-01-19 5:03 ` dmidecode output for ubuntu - Acer Ferrari 5000 Len Brown
0 siblings, 1 reply; 2+ messages in thread
From: Dan Barnes @ 2007-11-01 23:09 UTC (permalink / raw)
To: linux-acpi
[-- Attachment #1: Type: text/plain, Size: 460 bytes --]
Information found in the dmesg output suggested
sending the dmidecode output to you.
This is from kernel:
Linux ubuntu 2.6.22-8-generic #1 SMP Thu Jul 12
15:59:45 GMT 2007 i686 GNU/Linux
If you do not want this info, please let me know.
Also what problem are you trying to solve?
Thanks
Dan Barnes
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
[-- Attachment #2: 1755569284-dmidecode1.out --]
[-- Type: application/octet-stream, Size: 9793 bytes --]
# dmidecode 2.9
SMBIOS 2.4 present.
35 structures occupying 1106 bytes.
Table at 0x000F01B0.
Handle 0x0000, DMI type 0, 24 bytes
BIOS Information
Vendor: Acer
Version: v1.3225
Release Date: 01/11/07
Address: 0xE4A80
Runtime Size: 112000 bytes
ROM Size: 1024 kB
Characteristics:
ISA is supported
PCI is supported
PC Card (PCMCIA) is supported
PNP is supported
BIOS is upgradeable
BIOS shadowing is allowed
ESCD support is available
Boot from CD is supported
ACPI is supported
USB legacy is supported
BIOS boot specification is supported
Targeted content distribution is supported
Handle 0x0001, DMI type 1, 27 bytes
System Information
Manufacturer: Acer, inc.
Product Name: Ferrari 5000
Version: Not Applicable
Serial Number: LXFR50U059709101362500
UUID: A02BAF22-2158-D811-8B16-001636A65708
Wake-up Type: Power Switch
SKU Number: Not Specified
Family: Not Specified
Handle 0x0002, DMI type 2, 8 bytes
Base Board Information
Manufacturer: Acer, Inc.
Product Name: Ferrari5
Version: Not Applicable
Serial Number: LXFR50U059709101362500
Handle 0x0003, DMI type 3, 17 bytes
Chassis Information
Manufacturer: Acer, Inc.
Type: Other
Lock: Not Present
Version: N/A
Serial Number: None
Asset Tag:
Boot-up State: Safe
Power Supply State: Safe
Thermal State: Safe
Security Status: None
OEM Information: 0x00001234
Handle 0x0004, DMI type 4, 35 bytes
Processor Information
Socket Designation: Socket M2/S1G1
Type: Central Processor
Family: Opteron
Manufacturer: AMD
ID: 82 0F 04 00 FF FB 8B 17
Signature: Family 15, Model 72, Stepping 2
Flags:
FPU (Floating-point unit on-chip)
VME (Virtual mode extension)
DE (Debugging extension)
PSE (Page size extension)
TSC (Time stamp counter)
MSR (Model specific registers)
PAE (Physical address extension)
MCE (Machine check exception)
CX8 (CMPXCHG8 instruction supported)
APIC (On-chip APIC hardware supported)
SEP (Fast system call)
MTRR (Memory type range registers)
PGE (Page global enable)
MCA (Machine check architecture)
CMOV (Conditional move instruction supported)
PAT (Page attribute table)
PSE-36 (36-bit page size extension)
CLFSH (CLFLUSH instruction supported)
MMX (MMX technology supported)
FXSR (Fast floating-point save and restore)
SSE (Streaming SIMD extensions)
SSE2 (Streaming SIMD extensions 2)
HTT (Hyper-threading technology)
Version: Engineering Sample
Voltage: 1.4 V
External Clock: 133 MHz
Max Speed: 2000 MHz
Current Speed: 2000 MHz
Status: Populated, Enabled
Upgrade: Other
L1 Cache Handle: Not Provided
L2 Cache Handle: 0x0005
L3 Cache Handle: Not Provided
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Handle 0x0005, DMI type 7, 19 bytes
Cache Information
Socket Designation: L2 Cache
Configuration: Enabled, Socketed, Level 2
Operational Mode: Write Back
Location: Internal
Installed Size: 1024 KB
Maximum Size: 1024 KB
Supported SRAM Types:
Burst
Pipeline Burst
Installed SRAM Type: Synchronous
Speed: Unknown
Error Correction Type: Unknown
System Type: Unknown
Associativity: Unknown
Handle 0x0006, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J28
Internal Connector Type: None
External Reference Designator: COM A
External Connector Type: DB-9 male
Port Type: Serial Port 16550A Compatible
Handle 0x0007, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J28
Internal Connector Type: None
External Reference Designator: Parallel
External Connector Type: DB-25 female
Port Type: Parallel Port ECP/EPP
Handle 0x0008, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J28
Internal Connector Type: None
External Reference Designator: Video
External Connector Type: DB-15 female
Port Type: Video Port
Handle 0x0009, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J33
Internal Connector Type: None
External Reference Designator: Keyboard
External Connector Type: Circular DIN-8 male
Port Type: Keyboard Port
Handle 0x000A, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J33
Internal Connector Type: None
External Reference Designator: PS/2 Mouse
External Connector Type: Circular DIN-8 male
Port Type: Keyboard Port
Handle 0x000B, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J31
Internal Connector Type: None
External Reference Designator: USB 1
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x000C, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J32
Internal Connector Type: None
External Reference Designator: USB 2
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x000D, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J32
Internal Connector Type: None
External Reference Designator: USB 3
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x000E, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J31
Internal Connector Type: None
External Reference Designator: USB 4
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x000F, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J30
Internal Connector Type: None
External Reference Designator: Microphone In
External Connector Type: Mini Jack (headphones)
Port Type: Audio Port
Handle 0x0010, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J30
Internal Connector Type: None
External Reference Designator: Line In
External Connector Type: Mini Jack (headphones)
Port Type: Audio Port
Handle 0x0011, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J30
Internal Connector Type: None
External Reference Designator: Speaker Out
External Connector Type: Mini Jack (headphones)
Port Type: Audio Port
Handle 0x0012, DMI type 9, 13 bytes
System Slot Information
Designation: PCI1
Type: 32-bit PCI
Current Usage: Unknown
Length: Long
ID: 0
Characteristics:
5.0 V is provided
3.3 V is provided
PME signal is supported
Handle 0x0013, DMI type 9, 13 bytes
System Slot Information
Designation: PCI2
Type: 32-bit PCI
Current Usage: Unknown
Length: Long
ID: 0
Characteristics:
5.0 V is provided
3.3 V is provided
PME signal is supported
Handle 0x0014, DMI type 9, 13 bytes
System Slot Information
Designation: PCI3
Type: 32-bit PCI
Current Usage: Unknown
Length: Long
ID: 0
Characteristics:
5.0 V is provided
3.3 V is provided
PME signal is supported
Handle 0x0015, DMI type 10, 6 bytes
On Board Device Information
Type: Video
Status: Disabled
Description: ATI RS400M
Handle 0x0016, DMI type 10, 6 bytes
On Board Device Information
Type: Sound
Status: Disabled
Description: ESS 1869
Handle 0x0017, DMI type 11, 5 bytes
OEM Strings
String 1: AMD New Processor Technology
String 2: www.amd.com
String 3: Have a nice day :)
Handle 0x0018, DMI type 12, 5 bytes
System Configuration Options
Option 1: J13 1-2 Normal Operation, 2-3 Clear CMOS
Handle 0x0019, DMI type 13, 22 bytes
BIOS Language Information
Installable Languages: 1
enUS
Currently Installed Language: enUS
Handle 0x001A, DMI type 15, 29 bytes
System Event Log
Area Length: 16 bytes
Header Start Offset: 0x0000
Header Length: 16 bytes
Data Start Offset: 0x0010
Access Method: General-purpose non-volatile data functions
Access Address: 0x0000
Status: Valid, Not Full
Change Token: 0x00000095
Header Format: Type 1
Supported Log Type Descriptors: 3
Descriptor 1: POST error
Data Format 1: POST results bitmap
Descriptor 2: Single-bit ECC memory error
Data Format 2: Multiple-event
Descriptor 3: Multi-bit ECC memory error
Data Format 3: Multiple-event
Handle 0x001B, DMI type 16, 15 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 4 GB
Error Information Handle: Not Provided
Number Of Devices: 2
Handle 0x001C, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x001B
Error Information Handle: No Error
Total Width: 128 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: 1
Locator: S1
Bank Locator: DIMM1
Type: DDR2
Type Detail: Synchronous
Speed: Unknown
Manufacturer: Not Specified
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Handle 0x001D, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x001B
Error Information Handle: No Error
Total Width: 128 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: 2
Locator: S2
Bank Locator: DIMM2
Type: DDR2
Type Detail: Synchronous
Speed: Unknown
Manufacturer: Not Specified
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Handle 0x001E, DMI type 18, 23 bytes
32-bit Memory Error Information
Type: OK
Granularity: Unknown
Operation: Unknown
Vendor Syndrome: Unknown
Memory Array Address: Unknown
Device Address: Unknown
Resolution: Unknown
Handle 0x001F, DMI type 19, 15 bytes
Memory Array Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0007FFFFFFF
Range Size: 2 GB
Physical Array Handle: 0x001B
Partition Width: 0
Handle 0x0020, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0003FFFFFFF
Range Size: 1 GB
Physical Device Handle: 0x001C
Memory Array Mapped Address Handle: 0x001F
Partition Row Position: 2
Interleave Position: 1
Interleaved Data Depth: 6
Handle 0x0021, DMI type 32, 20 bytes
System Boot Information
Status: <OUT OF SPEC>
Handle 0x0022, DMI type 127, 4 bytes
End Of Table
[-- Attachment #3: 1335351943-dmesg1.out --]
[-- Type: application/octet-stream, Size: 34135 bytes --]
[ 0.000000] Linux version 2.6.22-8-generic (buildd@palmer) (gcc version 4.1.3 20070629 (prerelease) (Ubuntu 4.1.2-13ubuntu2)) #1 SMP Thu Jul 12 15:59:45 GMT 2007
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fe90000 (usable)
[ 0.000000] BIOS-e820: 000000007fe90000 - 000000007fe99000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007fe99000 - 000000007ff00000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007ff00000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] 1150MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f78b0
[ 0.000000] Entering add_active_range(0, 0, 523920) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 523920
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 523920
[ 0.000000] On node 0 totalpages: 523920
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2301 pages used for memmap
[ 0.000000] HighMem zone: 292243 pages, LIFO batch:31
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP 000F7880, 0014 (r0 PTLTD )
[ 0.000000] ACPI: RSDT 7FE90C69, 003C (r1 ACRSYS ACRPRDCT 6040000 LTP 0)
[ 0.000000] ACPI: FACP 7FE98B58, 0074 (r1 ATI Bowfin 6040000 ATI F4240)
[ 0.000000] ACPI: DSDT 7FE90CA5, 7EB3 (r1 ATI SB460 6040000 MSFT 2000002)
[ 0.000000] ACPI: FACS 7FE99FC0, 0040
[ 0.000000] ACPI: SSDT 7FE98BCC, 0206 (r1 PTLTD POWERNOW 6040000 LTP 1)
[ 0.000000] ACPI: APIC 7FE98DD2, 0054 (r1 PTLTD APIC 6040000 LTP 0)
[ 0.000000] ACPI: MCFG 7FE98E26, 003C (r1 PTLTD MCFG 6040000 LTP 0)
[ 0.000000] ACPI: BOOT 7FE98E62, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
[ 0.000000] ACPI: SLIC 7FE98E8A, 0176 (r1 ACRSYS ACRPRDCT 6040000 acer 0)
[ 0.000000] ATI board detected. Disabling timer routing over 8254.
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:8 APIC version 16
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 15:8 APIC version 16
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
[ 0.000000] Built 1 zonelists. Total pages: 519827
[ 0.000000] Kernel command line: file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz quiet splash -- BOOT_IMAGE=/casper/vmlinuz
[ 0.000000] mapped APIC to ffffd000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffc000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 2000.344 MHz processor.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 2066348k/2095680k available (2009k kernel code, 28120k reserved, 918k data, 364k init, 1178176k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 0.000000] .init : 0xc03e1000 - 0xc043c000 ( 364 kB)
[ 0.000000] .data : 0xc02f6606 - 0xc03dbe64 ( 918 kB)
[ 0.000000] .text : 0xc0100000 - 0xc02f6606 (2009 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 0.000000] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[ 0.084000] Calibrating delay using timer specific routine.. 4004.18 BogoMIPS (lpj=8008371)
[ 0.084000] Security Framework v1.0.0 initialized
[ 0.084000] SELinux: Disabled at boot.
[ 0.084000] Mount-cache hash table entries: 512
[ 0.084000] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f
[ 0.084000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.084000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.084000] CPU 0(2) -> Core 0
[ 0.084000] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f
[ 0.084000] Compat vDSO mapped to ffffe000.
[ 0.084000] Checking 'hlt' instruction... OK.
[ 0.100000] SMP alternatives: switching to UP code
[ 0.100000] ACPI: Core revision 20070126
[ 0.104000] CPU0: AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping 02
[ 0.104000] SMP alternatives: switching to SMP code
[ 0.104000] Booting processor 1/1 eip 3000
[ 0.116000] Initializing CPU#1
[ 0.196000] Calibrating delay using timer specific routine.. 4000.42 BogoMIPS (lpj=8000849)
[ 0.196000] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f
[ 0.196000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.196000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.196000] CPU 1(2) -> Core 1
[ 0.196000] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00004410 00002001 00000000 0000001f
[ 0.196000] CPU1: AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping 02
[ 0.196000] Total of 2 processors activated (8004.61 BogoMIPS).
[ 0.196000] ENABLING IO-APIC IRQs
[ 0.196000] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.236000] Brought up 2 CPUs
[ 0.272000] migration_cost=4000
[ 0.272000] Booting paravirtualized kernel on bare hardware
[ 0.272000] Time: 15:23:03 Date: 10/01/107
[ 0.272000] NET: Registered protocol family 16
[ 0.272000] EISA bus registered
[ 0.272000] ACPI: bus type pci registered
[ 0.272000] PCI: Using MMCONFIG
[ 0.272000] PCI: No mmconfig possible on device 00:18
[ 0.272000] Setting up standard PCI resources
[ 0.272000] mtrr: your CPUs had inconsistent fixed MTRR settings
[ 0.272000] mtrr: probably your BIOS does not setup all CPUs.
[ 0.272000] mtrr: corrected configuration.
[ 0.272000] ACPI: EC: Look up EC in DSDT
[ 0.276000] ACPI: EC: GPE=0x14, ports=0x66, 0x62
[ 0.292000] ACPI: System BIOS is requesting _OSI(Linux)
[ 0.292000] ACPI: Please test with "acpi_osi=!Linux"
[ 0.292000] Please send dmidecode to linux-acpi@vger.kernel.org
[ 0.292000] ACPI: Interpreter enabled
[ 0.292000] ACPI: (supports S0 S3 S4 S5)
[ 0.292000] ACPI: Using IOAPIC for interrupt routing
[ 0.296000] ACPI: EC: GPE=0x14, ports=0x66, 0x62
[ 0.296000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.296000] PCI: Probing PCI hardware (bus 00)
[ 0.300000] PCI: Transparent bridge - 0000:00:14.4
[ 0.300000] PCI: Bus #09 (-#0c) is hidden behind transparent bridge #08 (-#09) (try 'pci=assign-busses')
[ 0.300000] Please report the result to linux-kernel to fix this permanently
[ 0.300000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.300000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB2_._PRT]
[ 0.300000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT]
[ 0.300000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT]
[ 0.300000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB7_._PRT]
[ 0.300000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.304000] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
[ 0.304000] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
[ 0.304000] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
[ 0.304000] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
[ 0.304000] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
[ 0.304000] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
[ 0.304000] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
[ 0.304000] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
[ 0.304000] ACPI: PCI Interrupt Link [LNKU] (IRQs 3 4 5 7) *0, disabled.
[ 0.304000] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.304000] pnp: PnP ACPI init
[ 0.304000] ACPI: bus type pnp registered
[ 0.308000] pnp: PnP ACPI: found 13 devices
[ 0.308000] ACPI: ACPI bus type pnp unregistered
[ 0.308000] PnPBIOS: Disabled by ACPI PNP
[ 0.308000] PCI: Using ACPI for IRQ routing
[ 0.308000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 0.308000] PCI: Cannot allocate resource region 7 of bridge 0000:00:04.0
[ 0.308000] PCI: Cannot allocate resource region 8 of bridge 0000:00:04.0
[ 0.308000] PCI: Cannot allocate resource region 7 of bridge 0000:00:05.0
[ 0.308000] PCI: Cannot allocate resource region 8 of bridge 0000:00:05.0
[ 0.308000] PCI: Cannot allocate resource region 9 of bridge 0000:00:05.0
[ 0.308000] PCI: Cannot allocate resource region 7 of bridge 0000:00:06.0
[ 0.308000] PCI: Cannot allocate resource region 8 of bridge 0000:00:06.0
[ 0.308000] NET: Registered protocol family 8
[ 0.308000] NET: Registered protocol family 20
[ 0.308000] pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
[ 0.308000] pnp: 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.308000] pnp: 00:01: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 0.308000] pnp: 00:08: ioport range 0x1080-0x1080 has been reserved
[ 0.308000] pnp: 00:08: ioport range 0x220-0x22f has been reserved
[ 0.308000] pnp: 00:09: iomem range 0xe0000-0xfffff could not be reserved
[ 0.308000] pnp: 00:09: iomem range 0xfff00000-0xffffffff could not be reserved
[ 0.308000] pnp: 00:09: iomem range 0x0-0xfff could not be reserved
[ 0.340000] PCI: Bridge: 0000:00:02.0
[ 0.340000] IO window: 9000-9fff
[ 0.340000] MEM window: b0100000-b01fffff
[ 0.340000] PREFETCH window: c0000000-cfffffff
[ 0.340000] PCI: Bridge: 0000:00:04.0
[ 0.340000] IO window: disabled.
[ 0.340000] MEM window: disabled.
[ 0.340000] PREFETCH window: disabled.
[ 0.340000] PCI: Bridge: 0000:00:05.0
[ 0.340000] IO window: disabled.
[ 0.340000] MEM window: disabled.
[ 0.340000] PREFETCH window: disabled.
[ 0.340000] PCI: Bridge: 0000:00:06.0
[ 0.340000] IO window: disabled.
[ 0.340000] MEM window: disabled.
[ 0.340000] PREFETCH window: disabled.
[ 0.340000] PCI: Bridge: 0000:00:07.0
[ 0.340000] IO window: disabled.
[ 0.340000] MEM window: b0200000-b02fffff
[ 0.340000] PREFETCH window: disabled.
[ 0.340000] PCI: Bus 9, cardbus bridge: 0000:08:09.0
[ 0.340000] IO window: 00002000-000020ff
[ 0.340000] IO window: 00002400-000024ff
[ 0.340000] PREFETCH window: 88000000-8bffffff
[ 0.340000] MEM window: 90000000-93ffffff
[ 0.340000] PCI: Bridge: 0000:00:14.4
[ 0.340000] IO window: 2000-2fff
[ 0.340000] MEM window: b0300000-b03fffff
[ 0.340000] PREFETCH window: 88000000-8bffffff
[ 0.340000] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 0.340000] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 0.340000] PCI: Setting latency timer of device 0000:00:05.0 to 64
[ 0.340000] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 0.340000] PCI: Setting latency timer of device 0000:00:07.0 to 64
[ 0.340000] PCI: Enabling device 0000:08:09.0 (0000 -> 0003)
[ 0.340000] ACPI: PCI Interrupt 0000:08:09.0[A] -> GSI 20 (level, low) -> IRQ 16
[ 0.340000] NET: Registered protocol family 2
[ 0.344000] Time: acpi_pm clocksource has been installed.
[ 0.344000] Switched to high resolution mode on CPU 0
[ 0.348000] Switched to high resolution mode on CPU 1
[ 0.380000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.380000] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[ 0.380000] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.380000] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.380000] TCP reno registered
[ 0.392000] checking if image is initramfs... it is
[ 0.956000] Freeing initrd memory: 7007k freed
[ 0.956000] Simple Boot Flag at 0x36 set to 0x1
[ 0.956000] audit: initializing netlink socket (disabled)
[ 0.956000] audit(1193930582.844:1): initialized
[ 0.956000] highmem bounce pool size: 64 pages
[ 0.956000] VFS: Disk quotas dquot_6.5.1
[ 0.956000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.956000] io scheduler noop registered
[ 0.956000] io scheduler anticipatory registered
[ 0.956000] io scheduler deadline registered
[ 0.956000] io scheduler cfq registered (default)
[ 0.956000] PCI: MSI quirk detected. MSI deactivated.
[ 0.956000] Boot video device is 0000:01:00.0
[ 0.956000] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 0.956000] assign_interrupt_mode Found MSI capability
[ 0.956000] Allocate Port Service[0000:00:02.0:pcie00]
[ 0.956000] Allocate Port Service[0000:00:02.0:pcie01]
[ 0.956000] Allocate Port Service[0000:00:02.0:pcie03]
[ 0.956000] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 0.956000] assign_interrupt_mode Found MSI capability
[ 0.956000] Allocate Port Service[0000:00:04.0:pcie00]
[ 0.956000] Allocate Port Service[0000:00:04.0:pcie01]
[ 0.956000] Allocate Port Service[0000:00:04.0:pcie02]
[ 0.956000] Allocate Port Service[0000:00:04.0:pcie03]
[ 0.956000] PCI: Setting latency timer of device 0000:00:05.0 to 64
[ 0.956000] assign_interrupt_mode Found MSI capability
[ 0.956000] Allocate Port Service[0000:00:05.0:pcie00]
[ 0.956000] Allocate Port Service[0000:00:05.0:pcie01]
[ 0.956000] Allocate Port Service[0000:00:05.0:pcie02]
[ 0.956000] Allocate Port Service[0000:00:05.0:pcie03]
[ 0.956000] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 0.956000] assign_interrupt_mode Found MSI capability
[ 0.956000] Allocate Port Service[0000:00:06.0:pcie00]
[ 0.956000] Allocate Port Service[0000:00:06.0:pcie01]
[ 0.956000] Allocate Port Service[0000:00:06.0:pcie02]
[ 0.956000] Allocate Port Service[0000:00:06.0:pcie03]
[ 0.956000] PCI: Setting latency timer of device 0000:00:07.0 to 64
[ 0.956000] assign_interrupt_mode Found MSI capability
[ 0.956000] Allocate Port Service[0000:00:07.0:pcie00]
[ 0.956000] Allocate Port Service[0000:00:07.0:pcie01]
[ 0.956000] Allocate Port Service[0000:00:07.0:pcie02]
[ 0.956000] Allocate Port Service[0000:00:07.0:pcie03]
[ 0.956000] Evaluate _OSC Set fails. Status = 0x0005
[ 0.956000] Evaluate _OSC Set fails. Status = 0x0005
[ 0.956000] aer_init: AER service init fails - Run ACPI _OSC fails
[ 0.956000] aer: probe of 0000:00:02.0:pcie01 failed with error 2
[ 0.956000] Evaluate _OSC Set fails. Status = 0x0005
[ 0.956000] Evaluate _OSC Set fails. Status = 0x0005
[ 0.956000] aer_init: AER service init fails - Run ACPI _OSC fails
[ 0.956000] aer: probe of 0000:00:04.0:pcie01 failed with error 2
[ 0.956000] Evaluate _OSC Set fails. Status = 0x0005
[ 0.956000] Evaluate _OSC Set fails. Status = 0x0005
[ 0.956000] aer_init: AER service init fails - Run ACPI _OSC fails
[ 0.956000] aer: probe of 0000:00:05.0:pcie01 failed with error 2
[ 0.956000] Evaluate _OSC Set fails. Status = 0x0005
[ 0.956000] Evaluate _OSC Set fails. Status = 0x0005
[ 0.956000] aer_init: AER service init fails - Run ACPI _OSC fails
[ 0.956000] aer: probe of 0000:00:06.0:pcie01 failed with error 2
[ 0.956000] Evaluate _OSC Set fails. Status = 0x0005
[ 0.956000] Evaluate _OSC Set fails. Status = 0x0005
[ 0.956000] aer_init: AER service init fails - Run ACPI _OSC fails
[ 0.956000] aer: probe of 0000:00:07.0:pcie01 failed with error 2
[ 0.956000] isapnp: Scanning for PnP cards...
[ 1.316000] isapnp: No Plug & Play device found
[ 1.340000] Real Time Clock Driver v1.12ac
[ 1.340000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 1.340000] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.340000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 1.340000] input: Macintosh mouse button emulation as /class/input/input0
[ 1.340000] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 1.344000] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 1.344000] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.344000] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.344000] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.344000] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.344000] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.344000] mice: PS/2 mouse device common for all mice
[ 1.344000] EISA: Probing bus 0 at eisa.0
[ 1.344000] Cannot allocate resource for EISA slot 1
[ 1.344000] Cannot allocate resource for EISA slot 2
[ 1.344000] Cannot allocate resource for EISA slot 8
[ 1.344000] EISA: Detected 0 cards.
[ 1.344000] TCP cubic registered
[ 1.344000] NET: Registered protocol family 1
[ 1.344000] Using IPI No-Shortcut mode
[ 1.344000] Magic number: 15:517:385
[ 1.344000] Freeing unused kernel memory: 364k freed
[ 1.468000] input: AT Translated Set 2 keyboard as /class/input/input1
[ 2.560000] Capability LSM initialized
[ 2.572000] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 2.572000] ACPI: Thermal Zone [THRM] (65 C)
[ 3.088000] SCSI subsystem initialized
[ 3.092000] libata version 2.21 loaded.
[ 3.096000] sata_sil 0000:00:12.0: version 2.2
[ 3.096000] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 17
[ 3.096000] scsi0 : sata_sil
[ 3.096000] scsi1 : sata_sil
[ 3.096000] ata1: SATA max UDMA/100 cmd 0xf8830080 ctl 0xf883008a bmdma 0xf8830000 irq 17
[ 3.096000] ata2: SATA max UDMA/100 cmd 0xf88300c0 ctl 0xf88300ca bmdma 0xf8830008 irq 17
[ 3.128000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 3.128000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 3.144000] usbcore: registered new interface driver usbfs
[ 3.144000] usbcore: registered new interface driver hub
[ 3.144000] usbcore: registered new device driver usb
[ 3.244000] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.564000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 3.572000] ata1.00: ATA-7: Hitachi HTS541616J9SA00, SB4OC70P, max UDMA/100
[ 3.572000] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (not used)
[ 3.588000] ata1.00: configured for UDMA/100
[ 3.900000] ata2: SATA link down (SStatus 0 SControl 310)
[ 3.900000] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54161 SB4O PQ: 0 ANSI: 5
[ 3.900000] ATIIXP: IDE controller at PCI slot 0000:00:14.1
[ 3.900000] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 18
[ 3.900000] ATIIXP: chipset revision 128
[ 3.900000] ATIIXP: not 100% native mode: will probe irqs later
[ 3.900000] ide0: BM-DMA at 0x8460-0x8467, BIOS settings: hda:DMA, hdb:pio
[ 3.900000] ATIIXP: simplex device: DMA disabled
[ 3.900000] ide1: ATIIXP Bus-Master DMA disabled (BIOS)
[ 3.900000] Probing IDE interface ide0...
[ 3.908000] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 3.908000] sd 0:0:0:0: [sda] Write Protect is off
[ 3.908000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.908000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.908000] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 3.908000] sd 0:0:0:0: [sda] Write Protect is off
[ 3.908000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.908000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.908000] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
[ 4.380000] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.384000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.640000] hda: TOSHIBA DVDW/HD TS-L802A, ATAPI CD/DVD-ROM drive
[ 4.976000] hda: selected mode 0x42
[ 4.976000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 4.976000] Probing IDE interface ide1...
[ 5.288000] kjournald starting. Commit interval 5 seconds
[ 5.288000] EXT3-fs: mounted filesystem with ordered data mode.
[ 5.344000] kjournald starting. Commit interval 5 seconds
[ 5.344000] EXT3-fs: mounted filesystem with ordered data mode.
[ 5.540000] ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 19
[ 5.540000] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 5.540000] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
[ 5.540000] ehci_hcd 0000:00:13.2: irq 19, io mem 0xb0007000
[ 5.540000] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 5.540000] usb usb1: configuration #1 chosen from 1 choice
[ 5.540000] hub 1-0:1.0: USB hub found
[ 5.540000] hub 1-0:1.0: 8 ports detected
[ 5.548000] hda: ATAPI 63X DVD-ROM DVD-R-RAM CD-R/RW drive, 8192kB Cache, UDMA(33)
[ 5.548000] Uniform CD-ROM driver Revision: 3.20
[ 5.644000] tg3.c:v3.77 (May 31, 2007)
[ 5.644000] ACPI: PCI Interrupt 0000:08:04.0[A] -> GSI 22 (level, low) -> IRQ 17
[ 5.720000] eth0: Tigon3 [partno(BCM95788) rev 3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000Base-T Ethernet 00:16:36:a6:57:08
[ 5.720000] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1]
[ 5.720000] eth0: dma_rwctrl[763f0000] dma_mask[32-bit]
[ 5.720000] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 19
[ 5.720000] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 5.720000] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
[ 5.720000] ohci_hcd 0000:00:13.0: irq 19, io mem 0xb0005000
[ 5.776000] usb usb2: configuration #1 chosen from 1 choice
[ 5.776000] hub 2-0:1.0: USB hub found
[ 5.776000] hub 2-0:1.0: 4 ports detected
[ 5.880000] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 19
[ 5.880000] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 5.880000] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
[ 5.880000] ohci_hcd 0000:00:13.1: irq 19, io mem 0xb0006000
[ 5.884000] usb 1-8: new high speed USB device using ehci_hcd and address 2
[ 5.936000] usb usb3: configuration #1 chosen from 1 choice
[ 5.936000] hub 3-0:1.0: USB hub found
[ 5.936000] hub 3-0:1.0: 4 ports detected
[ 6.040000] ACPI: PCI Interrupt 0000:08:09.1[A] -> GSI 20 (level, low) -> IRQ 16
[ 6.056000] usb 1-8: configuration #1 chosen from 1 choice
[ 6.088000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[b0315000-b03157ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 6.720000] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 6.752000] ISO 9660 Extensions: RRIP_1991A
[ 6.760000] Registering unionfs 1.4
[ 6.760000] unionfs: debugging is not enabled
[ 6.768000] loop: module loaded
[ 6.956000] squashfs: version 3.2-UBUNTU (2007/04/10) Phillip Lougher
[ 47.088000] Clocksource tsc unstable (delta = 23431143006 ns)
[ 59.916000] PM: Writing back config space on device 0000:08:04.0 at offset c (was ff690000, writing 0)
[ 59.916000] PM: Writing back config space on device 0000:08:04.0 at offset b (was 3ed173b, writing 10a1025)
[ 59.916000] PM: Writing back config space on device 0000:08:04.0 at offset 3 (was 0, writing 4008)
[ 59.916000] PM: Writing back config space on device 0000:08:04.0 at offset 2 (was 2000000, writing 2000003)
[ 59.916000] PM: Writing back config space on device 0000:08:04.0 at offset 1 (was 2b00000, writing 2b00006)
[ 59.916000] PM: Writing back config space on device 0000:08:04.0 at offset 0 (was 3ed173b, writing 169c14e4)
[ 60.976000] Linux agpgart interface v0.102 (c) Dave Jones
[ 61.372000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 61.556000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 61.800000] tg3: eth0: Link is up at 100 Mbps, full duplex.
[ 61.800000] tg3: eth0: Flow control is off for TX and off for RX.
[ 62.692000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x12a0b1, caps: 0xa04713/0x204000
[ 62.716000] irda_init()
[ 62.716000] NET: Registered protocol family 23
[ 62.720000] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
[ 62.736000] input: SynPS/2 Synaptics TouchPad as /class/input/input2
[ 62.772000] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 1.
[ 62.772000] nsc-ircc, chip->init
[ 62.772000] nsc-ircc, Found chip at base=0x02e
[ 62.772000] nsc-ircc, driver loaded (Dag Brattli)
[ 62.772000] IrDA: Registered device irda0
[ 62.772000] nsc-ircc, Found dongle: Supports SIR Mode only
[ 62.772000] nsc-ircc, chip->init
[ 62.772000] nsc-ircc, Found chip at base=0x02e
[ 62.772000] nsc-ircc, driver loaded (Dag Brattli)
[ 62.772000] nsc_ircc_open(), can't get iobase of 0x2f8
[ 62.772000] input: PC Speaker as /class/input/input3
[ 62.776000] ath_hal: module license 'Proprietary' taints kernel.
[ 62.776000] ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
[ 62.992000] wlan: 0.8.4.2 (0.9.3)
[ 62.996000] parport_pc 00:0c: reported by Plug and Play ACPI
[ 62.996000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 63.148000] ath_pci: 0.9.4.5 (0.9.3)
[ 63.148000] ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 19 (level, low) -> IRQ 19
[ 63.148000] PCI: Setting latency timer of device 0000:07:00.0 to 64
[ 63.712000] ath_rate_sample: 1.2 (0.9.3)
[ 64.032000] Linux video capture interface: v2.00
[ 64.036000] wifi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[ 64.036000] wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
[ 64.036000] wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[ 64.036000] wifi0: H/W encryption support: WEP AES AES_CCM TKIP
[ 64.036000] wifi0: mac 10.3 phy 6.1 radio 10.2
[ 64.036000] wifi0: Use hw queue 1 for WME_AC_BE traffic
[ 64.036000] wifi0: Use hw queue 0 for WME_AC_BK traffic
[ 64.036000] wifi0: Use hw queue 2 for WME_AC_VI traffic
[ 64.036000] wifi0: Use hw queue 3 for WME_AC_VO traffic
[ 64.036000] wifi0: Use hw queue 8 for CAB traffic
[ 64.036000] wifi0: Use hw queue 9 for beacons
[ 64.108000] NET: Registered protocol family 17
[ 64.488000] sdhci: Secure Digital Host Controller Interface driver
[ 64.488000] sdhci: Copyright(c) Pierre Ossman
[ 64.504000] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/gspcav1/gspca_core.c: USB SPCA5XX camera found.(VC0321)
[ 64.588000] wifi0: Atheros 5424/2424: mem=0xb0200000, irq=19
[ 64.588000] Yenta: CardBus bridge found at 0000:08:09.0 [1025:010a]
[ 64.588000] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 64.588000] Yenta: Routing CardBus interrupts to PCI
[ 64.588000] Yenta TI: socket 0000:08:09.0, mfunc 0x01321b22, devctl 0x66
[ 64.716000] usb 1-8: USB disconnect, address 2
[ 64.716000] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/gspcav1/gspca_core.c: Failed to configure camera
[ 64.716000] gspca: probe of 1-8:1.0 failed with error -5
[ 64.820000] Yenta: ISA IRQ mask 0x0c70, PCI irq 16
[ 64.820000] Socket status: 30000006
[ 64.820000] Yenta: Raising subordinate bus# of parent bus (#08) from #09 to #0c
[ 64.820000] pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
[ 64.820000] cs: IO port probe 0x2000-0x2fff: clean.
[ 64.820000] pcmcia: parent PCI bridge Memory window: 0xb0300000 - 0xb03fffff
[ 64.820000] pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8bffffff
[ 64.832000] sdhci: SDHCI controller found at 0000:08:09.3 [104c:803c] (rev 0)
[ 64.832000] ACPI: PCI Interrupt 0000:08:09.3[A] -> GSI 20 (level, low) -> IRQ 16
[ 64.832000] mmc0: SDHCI at 0xb0315800 irq 16 DMA
[ 64.832000] ACPI: PCI Interrupt 0000:08:09.2[A] -> GSI 20 (level, low) -> IRQ 16
[ 65.028000] ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 18
[ 65.092000] usb 1-8: new high speed USB device using ehci_hcd and address 3
[ 65.268000] usb 1-8: configuration #1 chosen from 1 choice
[ 65.268000] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/gspcav1/gspca_core.c: USB SPCA5XX camera found.(VC0321)
[ 65.500000] usb 1-8: USB disconnect, address 3
[ 65.500000] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/gspcav1/gspca_core.c: Failed to configure camera
[ 65.500000] gspca: probe of 1-8:1.0 failed with error -5
[ 65.844000] usb 1-8: new high speed USB device using ehci_hcd and address 4
[ 66.044000] cs: IO port probe 0x100-0x3af: clean.
[ 66.048000] cs: IO port probe 0x3e0-0x4ff: excluding 0x408-0x40f 0x4d0-0x4d7
[ 66.048000] cs: IO port probe 0x820-0x8ff: clean.
[ 66.048000] cs: IO port probe 0xc00-0xcf7: excluding 0xc00-0xc07 0xc10-0xc17 0xc50-0xc57 0xc68-0xc6f 0xcd0-0xcdf
[ 66.048000] cs: IO port probe 0xa00-0xaff: clean.
[ 66.060000] NET: Registered protocol family 10
[ 66.060000] lo: Disabled Privacy Extensions
[ 66.080000] usb 1-8: configuration #1 chosen from 1 choice
[ 66.080000] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/gspcav1/gspca_core.c: USB SPCA5XX camera found.(VC0321)
[ 66.332000] usb 1-8: USB disconnect, address 4
[ 66.332000] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/gspcav1/gspca_core.c: Failed to configure camera
[ 66.332000] gspca: probe of 1-8:1.0 failed with error -5
[ 67.308000] usb 1-8: new high speed USB device using ehci_hcd and address 5
[ 69.684000] hda_intel: azx_get_response timeout, switching to polling mode...
[ 72.172000] hda_intel: azx_get_response timeout, switching to single_cmd mode...
[ 72.232000] usb 1-8: configuration #1 chosen from 1 choice
[ 72.236000] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/gspcav1/gspca_core.c: USB SPCA5XX camera found.(VC0321)
[ 73.836000] usbcore: registered new interface driver gspca
[ 73.836000] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/gspcav1/gspca_core.c: gspca driver 01.00.12 registered
[ 78.956000] eth0: no IPv6 routers present
[ 78.956000] ath0: no IPv6 routers present
[ 82.084000] fuse init (API version 7.8)
[ 84.784000] Adding 3145720k swap on /dev/sda7. Priority:-1 extents:1 across:3145720k
[ 108.864000] ACPI: AC Adapter [ACAD] (on-line)
[ 109.076000] ACPI: Battery Slot [BAT1] (battery present)
[ 109.096000] ACPI: ACPI Dock Station Driver
[ 109.096000] ACPI: \_SB_.PCI0.IDE_.PRID.PBAY: found ejectable bay
[ 109.096000] ACPI: \_SB_.PCI0.IDE_.PRID.PBAY: Adding notify handler
[ 109.096000] ACPI: Bay [\_SB_.PCI0.IDE_.PRID.PBAY] Added
[ 109.116000] input: Power Button (FF) as /class/input/input4
[ 109.116000] ACPI: Power Button (FF) [PWRF]
[ 109.120000] input: Power Button (CM) as /class/input/input5
[ 109.120000] ACPI: Power Button (CM) [PWRB]
[ 109.124000] input: Lid Switch as /class/input/input6
[ 109.124000] ACPI: Lid Switch [LID]
[ 109.124000] input: Sleep Button (CM) as /class/input/input7
[ 109.124000] ACPI: Sleep Button (CM) [SLPB]
[ 109.244000] toshiba_acpi: Unknown parameter `hotkeys_over_acpi'
[ 109.828000] powernow-k8: Found 2 AMD Turion(tm) 64 X2 Mobile Technology TL-60 processors (version 2.00.00)
[ 109.828000] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x13
[ 109.828000] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x15
[ 109.828000] powernow-k8: 2 : fid 0x8 (1600 MHz), vid 0x17
[ 109.828000] powernow-k8: 3 : fid 0x0 (800 MHz), vid 0x1e
[ 118.240000] lp0: using parport0 (interrupt-driven).
[ 118.392000] ppdev: user-space parallel port driver
[ 125.696000] apm: BIOS not found.
[ 132.244000] hda-intel: Invalid position buffer, using LPIB read method instead.
[ 137.752000] cdrom: This disc doesn't have any tracks I recognize!
[ 138.284000] Bluetooth: Core ver 2.11
[ 138.284000] NET: Registered protocol family 31
[ 138.284000] Bluetooth: HCI device and connection manager initialized
[ 138.284000] Bluetooth: HCI socket layer initialized
[ 139.008000] Bluetooth: L2CAP ver 2.8
[ 139.008000] Bluetooth: L2CAP socket layer initialized
[ 139.464000] Bluetooth: RFCOMM socket layer initialized
[ 139.468000] Bluetooth: RFCOMM TTY layer initialized
[ 139.468000] Bluetooth: RFCOMM ver 1.8
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: dmidecode output for ubuntu - Acer Ferrari 5000
2007-11-01 23:09 dmidecode output for ubuntu Dan Barnes
@ 2008-01-19 5:03 ` Len Brown
0 siblings, 0 replies; 2+ messages in thread
From: Len Brown @ 2008-01-19 5:03 UTC (permalink / raw)
To: Dan Barnes; +Cc: linux-acpi
On Thursday 01 November 2007 19:09, Dan Barnes wrote:
> Information found in the dmesg output suggested
> sending the dmidecode output to you.
>
> This is from kernel:
>
> Linux ubuntu 2.6.22-8-generic #1 SMP Thu Jul 12
> 15:59:45 GMT 2007 i686 GNU/Linux
>
> If you do not want this info, please let me know.
>
> Also what problem are you trying to solve?
We're trying to limit Linux exposure to BIOS bugs
by disabling OSI(Linux) by default. However, to
do so, we need to survey the systems that use it
to see if any actually need it.
Thanks for the dmidecode output.
Do you notice any functional difference when booting with...
"acpi_osi=Linux" (default for 2.6.22 and earlier)
vs.
"acpi_osi=!Linux" (default for 2.6.23 and later)
...in particular, please check sound and wifi.
Also, please send me the output from acpidump.
thanks,
-Len
ps
If you don't have acpidump, you can get it from pmtools here:
http://www.lesswatts.org/projects/acpi/utilities.php
System Information
Manufacturer: Acer, inc.
Product Name: Ferrari 5000
Version: Not Applicable
Serial Number: LXFR50U059709101362500
UUID: A02BAF22-2158-D811-8B16-001636A65708
Wake-up Type: Power Switch
SKU Number: Not Specified
Family: Not Specified
Handle 0x0002, DMI type 2, 8 bytes
Base Board Information
Manufacturer: Acer, Inc.
Product Name: Ferrari5
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2008-01-19 5:03 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-11-01 23:09 dmidecode output for ubuntu Dan Barnes
2008-01-19 5:03 ` dmidecode output for ubuntu - Acer Ferrari 5000 Len Brown
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.