[PATCH 1/2] sky2: restore multicast addresses after recovery

[PATCH 1/2] sky2: restore multicast addresses after recovery

[Stephen Hemminger]

If the sky2 deadman timer forces a recovery, the multicast hash
list is lost. Move the call to sky2_set_multicast to the end
of sky2_up() so all paths that bring device up will restore multicast.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>

---
Please apply for 2.6.24

--- a/drivers/net/sky2.c	2008-01-23 16:00:34.000000000 -0800
+++ b/drivers/net/sky2.c	2008-01-23 16:04:20.000000000 -0800
@@ -1412,6 +1412,7 @@ static int sky2_up(struct net_device *de
 	imask |= portirq_msk[port];
 	sky2_write32(hw, B0_IMSK, imask);
 
+	sky2_set_multicast(dev);
 	return 0;
 
 err_out:
@@ -3533,8 +3534,6 @@ static int sky2_set_ringparam(struct net
 		err = sky2_up(dev);
 		if (err)
 			dev_close(dev);
-		else
-			sky2_set_multicast(dev);
 	}
 
 	return err;
@@ -4368,8 +4367,6 @@ static int sky2_resume(struct pci_dev *p
 				dev_close(dev);
 				goto out;
 			}
-
-			sky2_set_multicast(dev);
 		}
 	}
 

[PATCH 2/2] sky2: fix Wake On Lan interaction with BIOS

[Stephen Hemminger]

This patch disables config mode access after clearing PCI settings.
Some BIOS's seem to not do WOL if config bit still set.

Fixes: http://bugzilla.kernel.org/show_bug.cgi?id=9721

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>

---
Please get this into 2.6.24.

--- a/drivers/net/sky2.c	2008-01-23 16:31:13.000000000 -0800
+++ b/drivers/net/sky2.c	2008-01-23 16:31:16.000000000 -0800
@@ -621,6 +621,7 @@ static void sky2_phy_power(struct sky2_h
 	static const u32 phy_power[] = { PCI_Y2_PHY1_POWD, PCI_Y2_PHY2_POWD };
 	static const u32 coma_mode[] = { PCI_Y2_PHY1_COMA, PCI_Y2_PHY2_COMA };
 
+	sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
 	reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
 	/* Turn on/off phy power saving */
 	if (onoff)
@@ -632,7 +633,8 @@ static void sky2_phy_power(struct sky2_h
 		reg1 |= coma_mode[port];
 
 	sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
-	reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
+	sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
+	sky2_pci_read32(hw, PCI_DEV_REG1);
 
 	udelay(100);
 }
@@ -2427,6 +2429,7 @@ static void sky2_hw_intr(struct sky2_hw 
 	if (status & (Y2_IS_MST_ERR | Y2_IS_IRQ_STAT)) {
 		u16 pci_err;
 
+		sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
 		pci_err = sky2_pci_read16(hw, PCI_STATUS);
 		if (net_ratelimit())
 			dev_err(&pdev->dev, "PCI hardware error (0x%x)\n",
@@ -2434,12 +2437,14 @@ static void sky2_hw_intr(struct sky2_hw 
 
 		sky2_pci_write16(hw, PCI_STATUS,
 				      pci_err | PCI_STATUS_ERROR_BITS);
+		sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
 	}
 
 	if (status & Y2_IS_PCI_EXP) {
 		/* PCI-Express uncorrectable Error occurred */
 		u32 err;
 
+		sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
 		err = sky2_read32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS);
 		sky2_write32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS,
 			     0xfffffffful);
@@ -2447,6 +2452,7 @@ static void sky2_hw_intr(struct sky2_hw 
 			dev_err(&pdev->dev, "PCI Express error (0x%x)\n", err);
 
 		sky2_read32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS);
+		sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
 	}
 
 	if (status & Y2_HWE_L1_MASK)
@@ -2812,6 +2818,7 @@ static void sky2_reset(struct sky2_hw *h
 	}
 
 	sky2_power_on(hw);
+	sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
 
 	for (i = 0; i < hw->ports; i++) {
 		sky2_write8(hw, SK_REG(i, GMAC_LINK_CTRL), GMLC_RST_SET);

Re: [PATCH 1/2] sky2: restore multicast addresses after recovery

[Jeff Garzik]

Stephen Hemminger wrote:
> If the sky2 deadman timer forces a recovery, the multicast hash
> list is lost. Move the call to sky2_set_multicast to the end
> of sky2_up() so all paths that bring device up will restore multicast.
> 
> Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
> 
> ---
> Please apply for 2.6.24

applied 1-2

You'll want to send this to stable@kernel.org, since by the time I read 
your mail, 2.6.24 had been released, just around 24 hours thereafter.