* acer aspire 5315, Ubuntu 2.6.22-14-generic, kernel says send dmidecode, acpi not working correctly
@ 2008-01-28 2:42 Ibiltari
2008-01-28 10:51 ` Carlos Corbacho
` (2 more replies)
0 siblings, 3 replies; 5+ messages in thread
From: Ibiltari @ 2008-01-28 2:42 UTC (permalink / raw)
To: linux-acpi
[-- Attachment #1: Type: text/plain, Size: 186 bytes --]
Hi, cpu throtling is not aparently recognised and lots of "APIC error
on CPU0: 40(40)" messages.
Hope it helps, thanks for your work!!
Ion
Atached are dmsg and dmidcode in plain text
[-- Attachment #2: dmesg --]
[-- Type: application/octet-stream, Size: 32059 bytes --]
[ 0.000000] Linux version 2.6.22-14-generic (buildd@terranova) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Tue Dec 18 08:02:57 UTC 2007 (Ubuntu 2.6.22-14.47-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f4fe000 (usable)
[ 0.000000] BIOS-e820: 000000003f4fe000 - 000000003f509000 (reserved)
[ 0.000000] BIOS-e820: 000000003f509000 - 000000003f552000 (usable)
[ 0.000000] BIOS-e820: 000000003f552000 - 000000003f555000 (reserved)
[ 0.000000] BIOS-e820: 000000003f555000 - 000000003f5bb000 (usable)
[ 0.000000] BIOS-e820: 000000003f5bb000 - 000000003f5bf000 (reserved)
[ 0.000000] BIOS-e820: 000000003f5bf000 - 000000003f678000 (usable)
[ 0.000000] BIOS-e820: 000000003f678000 - 000000003f6bf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003f6bf000 - 000000003f700000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003f700000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] 118MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000fe1b0
[ 0.000000] Entering add_active_range(0, 0, 259704) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 259704
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 259704
[ 0.000000] On node 0 totalpages: 259704
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 236 pages used for memmap
[ 0.000000] HighMem zone: 30092 pages, LIFO batch:7
[ 0.000000] DMI 2.4 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00FE020 checksum 0
[ 0.000000] ACPI: RSDP 000FE020, 0024 (r2 ACRSYS)
[ 0.000000] ACPI: XSDT 3F6FE120, 0064 (r1 ACRSYS ACRPRDCT 1 1000013)
[ 0.000000] ACPI: FACP 3F6FD000, 00F4 (r4 ACRSYS ACRPRDCT 1 MSFT 1000013)
[ 0.000000] ACPI: DSDT 3F6F4000, 84EA (r1 ACRSYS ACRPRDCT 1 MSFT 1000013)
[ 0.000000] ACPI: FACS 3F67B000, 0040
[ 0.000000] ACPI: APIC 3F6F3000, 0068 (r2 ACRSYS ACRPRDCT 1 MSFT 1000013)
[ 0.000000] ACPI: MCFG 3F6F2000, 003C (r1 ACRSYS ACRPRDCT 1 MSFT 1000013)
[ 0.000000] ACPI: SLIC 3F6F1000, 0176 (r1 ACRSYS ACRPRDCT 1 MSFT 1000013)
[ 0.000000] ACPI: HPET 3F6F0000, 0038 (r1 ACRSYS ACRPRDCT 1 MSFT 1000013)
[ 0.000000] ACPI: SSDT 3F6EF000, 05D7 (r1 PmRef Cpu0Cst 3001 INTL 20051117)
[ 0.000000] ACPI: SSDT 3F6EE000, 04C4 (r1 PmRef CpuPm 3000 INTL 20051117)
[ 0.000000] ACPI: SSDT 3F6ED000, 0232 (r1 PmRef Cpu0Tst 3000 INTL 20051117)
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 7:6 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: Skipping IOAPIC probe due to 'noapic' option.
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI for processor (LAPIC) configuration information
[ 0.000000] Intel MultiProcessor Specification v1.4
[ 0.000000] Virtual Wire compatibility mode.
[ 0.000000] OEM ID: INSYDE Product ID: Napa CRB APIC at: 0xFEE00000
[ 0.000000] I/O APIC #32 Version 32 at 0xFEC00000.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Processors: 1
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
[ 0.000000] Built 1 zonelists. Total pages: 257676
[ 0.000000] Kernel command line: root=UUID=f7346410-b556-4356-867f-f0445d481b28 ro quiet splash noapic
[ 0.000000] mapped APIC to ffffd000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffc000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1729.081 MHz processor.
[ 17.247640] Console: colour VGA+ 80x25
[ 17.247989] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 17.248302] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 17.273714] Memory: 1018136k/1038816k available (2015k kernel code, 19856k reserved, 916k data, 364k init, 121240k highmem)
[ 17.273723] virtual kernel memory layout:
[ 17.273724] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 17.273725] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 17.273726] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 17.273727] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 17.273728] .init : 0xc03e3000 - 0xc043e000 ( 364 kB)
[ 17.273729] .data : 0xc02f7de6 - 0xc03dce84 ( 916 kB)
[ 17.273730] .text : 0xc0100000 - 0xc02f7de6 (2015 kB)
[ 17.273733] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 17.273769] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 17.273913] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 17.273918] hpet0: 3 64-bit timers, 14318180 Hz
[ 17.354906] Calibrating delay using timer specific routine.. 3462.01 BogoMIPS (lpj=6924023)
[ 17.354931] Security Framework v1.0.0 initialized
[ 17.354938] SELinux: Disabled at boot.
[ 17.354949] Mount-cache hash table entries: 512
[ 17.355085] CPU: After generic identify, caps: afebfbff 20000000 00000000 00000000 0000e31d 00000000 00000001
[ 17.355093] monitor/mwait feature present.
[ 17.355095] using mwait in idle threads.
[ 17.355099] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 17.355102] CPU: L2 cache: 1024K
[ 17.355105] CPU: After all inits, caps: afebfbff 20000000 00000000 00003940 0000e31d 00000000 00000001
[ 17.355115] Compat vDSO mapped to ffffe000.
[ 17.355129] Checking 'hlt' instruction... OK.
[ 17.371013] SMP alternatives: switching to UP code
[ 17.371216] Freeing SMP alternatives: 11k freed
[ 17.371466] Early unpacking initramfs... done
[ 17.689430] ACPI: Core revision 20070126
[ 17.689486] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 17.692951] ACPI: setting ELCR to 0200 (from 0c00)
[ 17.738814] CPU0: Intel(R) Celeron(R) CPU 530 @ 1.73GHz stepping 01
[ 17.738840] Total of 1 processors activated (3462.01 BogoMIPS).
[ 17.846733] Brought up 1 CPUs
[ 17.846829] Booting paravirtualized kernel on bare hardware
[ 17.846916] Time: 2:12:32 Date: 00/28/108
[ 17.846934] NET: Registered protocol family 16
[ 17.847005] EISA bus registered
[ 17.847010] ACPI: bus type pci registered
[ 17.847170] PCI: Using configuration type 1
[ 17.847172] Setting up standard PCI resources
[ 17.848864] ACPI: EC: Look up EC in DSDT
[ 17.849975] ACPI: EC: GPE=0x1c, ports=0x66, 0x62
[ 17.856459] ACPI: System BIOS is requesting _OSI(Linux)
[ 17.856462] ACPI: Please test with "acpi_osi=!Linux"
[ 17.856463] Please send dmidecode to linux-acpi@vger.kernel.org
[ 17.865291] ACPI: Interpreter enabled
[ 17.865295] ACPI: (supports S0 S3 S4 S5)
[ 17.865313] ACPI: Using PIC for interrupt routing
[ 17.910932] ACPI: EC: GPE=0x1c, ports=0x66, 0x62
[ 17.910983] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 17.910994] PCI: Probing PCI hardware (bus 00)
[ 17.913045] PCI: Transparent bridge - 0000:00:1e.0
[ 17.913145] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 17.913574] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
[ 17.913736] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
[ 17.913909] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
[ 17.914081] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
[ 17.921720] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[ 17.921852] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
[ 17.921981] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[ 17.922109] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[ 17.922238] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 17.922367] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12)
[ 17.922494] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
[ 17.922622] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
[ 17.922774] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 17.922783] pnp: PnP ACPI init
[ 17.922791] ACPI: bus type pnp registered
[ 17.946941] pnp: PnP ACPI: found 9 devices
[ 17.946943] ACPI: ACPI bus type pnp unregistered
[ 17.946947] PnPBIOS: Disabled by ACPI PNP
[ 17.946994] PCI: Using ACPI for IRQ routing
[ 17.946997] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 17.947182] NET: Registered protocol family 8
[ 17.947184] NET: Registered protocol family 20
[ 17.947238] pnp: 00:01: ioport range 0x164e-0x164f has been reserved
[ 17.947242] pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
[ 17.947245] pnp: 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
[ 17.947248] pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
[ 17.947251] pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
[ 17.950657] Time: tsc clocksource has been installed.
[ 17.950677] Switched to high resolution mode on CPU 0
[ 17.977513] PCI: Bridge: 0000:00:1c.0
[ 17.977517] IO window: 4000-4fff
[ 17.977523] MEM window: 57300000-582fffff
[ 17.977529] PREFETCH window: 50000000-50ffffff
[ 17.977535] PCI: Bridge: 0000:00:1c.1
[ 17.977538] IO window: 3000-3fff
[ 17.977545] MEM window: 56300000-572fffff
[ 17.977550] PREFETCH window: 51000000-51ffffff
[ 17.977556] PCI: Bridge: 0000:00:1c.2
[ 17.977559] IO window: 2000-2fff
[ 17.977565] MEM window: 55200000-562fffff
[ 17.977570] PREFETCH window: 52000000-52ffffff
[ 17.977577] PCI: Bridge: 0000:00:1c.3
[ 17.977580] IO window: 1000-1fff
[ 17.977586] MEM window: 54100000-551fffff
[ 17.977591] PREFETCH window: 53000000-53ffffff
[ 17.977598] PCI: Bridge: 0000:00:1e.0
[ 17.977599] IO window: disabled.
[ 17.977605] MEM window: disabled.
[ 17.977609] PREFETCH window: disabled.
[ 17.977846] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[ 17.977848] PCI: setting IRQ 11 as level-triggered
[ 17.977854] ACPI: PCI Interrupt 0000:00:1c.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 17.977862] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 17.978076] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[ 17.978078] ACPI: PCI Interrupt 0000:00:1c.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 17.978085] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 17.978297] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[ 17.978299] ACPI: PCI Interrupt 0000:00:1c.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 17.978306] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 17.978517] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 17.978519] ACPI: PCI Interrupt 0000:00:1c.3[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 17.978526] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 17.978542] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 17.978552] NET: Registered protocol family 2
[ 18.014637] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 18.014732] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[ 18.015697] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 18.016107] TCP: Hash tables configured (established 131072 bind 65536)
[ 18.016110] TCP reno registered
[ 18.026754] checking if image is initramfs... it is
[ 18.649697] Freeing initrd memory: 7052k freed
[ 18.650127] audit: initializing netlink socket (disabled)
[ 18.650142] audit(1201486352.024:1): initialized
[ 18.650208] highmem bounce pool size: 64 pages
[ 18.651804] VFS: Disk quotas dquot_6.5.1
[ 18.651846] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 18.651931] io scheduler noop registered
[ 18.651933] io scheduler anticipatory registered
[ 18.651935] io scheduler deadline registered
[ 18.651947] io scheduler cfq registered (default)
[ 18.651960] Boot video device is 0000:00:02.0
[ 18.652351] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 18.652415] assign_interrupt_mode Found MSI capability
[ 18.652418] Allocate Port Service[0000:00:1c.0:pcie00]
[ 18.652446] Allocate Port Service[0000:00:1c.0:pcie02]
[ 18.652547] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 18.652611] assign_interrupt_mode Found MSI capability
[ 18.652613] Allocate Port Service[0000:00:1c.1:pcie00]
[ 18.652639] Allocate Port Service[0000:00:1c.1:pcie02]
[ 18.652743] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 18.652807] assign_interrupt_mode Found MSI capability
[ 18.652809] Allocate Port Service[0000:00:1c.2:pcie00]
[ 18.652836] Allocate Port Service[0000:00:1c.2:pcie02]
[ 18.652936] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 18.652999] assign_interrupt_mode Found MSI capability
[ 18.653001] Allocate Port Service[0000:00:1c.3:pcie00]
[ 18.653026] Allocate Port Service[0000:00:1c.3:pcie02]
[ 18.653175] isapnp: Scanning for PnP cards...
[ 19.007554] isapnp: No Plug & Play device found
[ 19.025982] Real Time Clock Driver v1.12ac
[ 19.026221] hpet_resources: 0xfed00000 is busy
[ 19.026276] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 19.027308] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 19.027465] input: Macintosh mouse button emulation as /class/input/input0
[ 19.027530] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 19.061650] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 19.061656] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 19.061816] mice: PS/2 mouse device common for all mice
[ 19.064000] EISA: Probing bus 0 at eisa.0
[ 19.064008] Cannot allocate resource for EISA slot 1
[ 19.064010] Cannot allocate resource for EISA slot 2
[ 19.064012] Cannot allocate resource for EISA slot 3
[ 19.064014] Cannot allocate resource for EISA slot 4
[ 19.064016] Cannot allocate resource for EISA slot 5
[ 19.064032] EISA: Detected 0 cards.
[ 19.064116] TCP cubic registered
[ 19.064130] NET: Registered protocol family 1
[ 19.064154] Using IPI No-Shortcut mode
[ 19.064303] Magic number: 8:449:208
[ 19.064336] hash matches device ttyt6
[ 19.064398] hash matches device vcsa
[ 19.064595] Freeing unused kernel memory: 364k freed
[ 19.090209] input: AT Translated Set 2 keyboard as /class/input/input1
[ 20.257134] AppArmor: AppArmor initialized<5>audit(1201486353.524:2): type=1505 info="AppArmor initialized" pid=1257
[ 20.264564] fuse init (API version 7.8)
[ 20.269735] Failure registering capabilities with primary security module.
[ 20.285281] Monitor-Mwait will be used to enter C-1 state
[ 20.285284] Monitor-Mwait will be used to enter C-2 state
[ 20.285287] Monitor-Mwait will be used to enter C-3 state
[ 20.285291] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 20.285295] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 20.285306] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 20.294824] ACPI: Thermal Zone [TZ01] (0 C)
[ 20.745640] usbcore: registered new interface driver usbfs
[ 20.745664] usbcore: registered new interface driver hub
[ 20.745682] usbcore: registered new device driver usb
[ 20.746376] USB Universal Host Controller Interface driver v3.0
[ 20.746432] ACPI: PCI Interrupt 0000:00:1a.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 20.746445] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[ 20.746449] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 20.746579] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 20.746612] uhci_hcd 0000:00:1a.0: irq 11, io base 0x000050c0
[ 20.746720] usb usb1: configuration #1 chosen from 1 choice
[ 20.746742] hub 1-0:1.0: USB hub found
[ 20.746747] hub 1-0:1.0: 2 ports detected
[ 20.849804] ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 10
[ 20.849808] PCI: setting IRQ 10 as level-triggered
[ 20.849814] ACPI: PCI Interrupt 0000:00:1a.1[B] -> Link [LNKF] -> GSI 10 (level, low) -> IRQ 10
[ 20.849826] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[ 20.849830] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 20.849853] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[ 20.849888] uhci_hcd 0000:00:1a.1: irq 10, io base 0x000050a0
[ 20.849972] usb usb2: configuration #1 chosen from 1 choice
[ 20.849994] hub 2-0:1.0: USB hub found
[ 20.849999] hub 2-0:1.0: 2 ports detected
[ 20.905686] SCSI subsystem initialized
[ 20.910273] libata version 2.21 loaded.
[ 20.953765] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
[ 20.953769] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
[ 20.953782] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 20.953786] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 20.953809] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
[ 20.953841] uhci_hcd 0000:00:1d.0: irq 11, io base 0x00005080
[ 20.953931] usb usb3: configuration #1 chosen from 1 choice
[ 20.953953] hub 3-0:1.0: USB hub found
[ 20.953959] hub 3-0:1.0: 2 ports detected
[ 21.057451] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 21.057466] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 21.057471] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 21.057492] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
[ 21.057524] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00005060
[ 21.057612] usb usb4: configuration #1 chosen from 1 choice
[ 21.057634] hub 4-0:1.0: USB hub found
[ 21.057640] hub 4-0:1.0: 2 ports detected
[ 3.632000] Marking TSC unstable due to: possible TSC halt in C2.
[ 3.636000] Time: hpet clocksource has been installed.
[ 3.736000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 3.736000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 3.736000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.736000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
[ 3.736000] uhci_hcd 0000:00:1d.2: irq 11, io base 0x00005040
[ 3.736000] usb usb5: configuration #1 chosen from 1 choice
[ 3.736000] hub 5-0:1.0: USB hub found
[ 3.736000] hub 5-0:1.0: 2 ports detected
[ 3.840000] ACPI: PCI Interrupt 0000:00:1a.7[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 3.840000] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[ 3.840000] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 3.840000] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
[ 3.840000] ehci_hcd 0000:00:1a.7: debug port 1
[ 3.840000] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
[ 3.840000] ehci_hcd 0000:00:1a.7: irq 11, io mem 0x58304c00
[ 3.844000] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 3.844000] usb usb6: configuration #1 chosen from 1 choice
[ 3.844000] hub 6-0:1.0: USB hub found
[ 3.844000] hub 6-0:1.0: 4 ports detected
[ 3.948000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
[ 3.948000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 3.948000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.948000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
[ 3.948000] ehci_hcd 0000:00:1d.7: debug port 1
[ 3.948000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 3.948000] ehci_hcd 0000:00:1d.7: irq 11, io mem 0x58304800
[ 3.976000] usb 4-2: new full speed USB device using uhci_hcd and address 2
[ 3.976000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 3.976000] usb usb7: configuration #1 chosen from 1 choice
[ 3.976000] hub 7-0:1.0: USB hub found
[ 3.976000] hub 7-0:1.0: 6 ports detected
[ 4.000000] Clocksource tsc unstable (delta = -274907906 ns)
[ 4.080000] tg3.c:v3.77 (May 31, 2007)
[ 4.080000] ACPI: PCI Interrupt 0000:05:00.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 4.080000] PCI: Setting latency timer of device 0000:05:00.0 to 64
[ 4.320000] usb 7-4: new high speed USB device using ehci_hcd and address 2
[ 4.436000] eth0: Tigon3 [partno(BCM95906) rev c002 PHY(5906)] (PCI Express) 10/100Base-TX Ethernet 00:1b:38:67:0b:72
[ 4.436000] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1]
[ 4.436000] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 4.440000] ata_piix 0000:00:1f.1: version 2.11
[ 4.440000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 4.440000] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 4.440000] scsi0 : ata_piix
[ 4.440000] scsi1 : ata_piix
[ 4.440000] ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000150e0 irq 14
[ 4.440000] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x000150e8 irq 15
[ 4.460000] usb 7-4: configuration #1 chosen from 1 choice
[ 4.760000] ata1.00: ATAPI: PIONEER DVD-RW DVR-K17RS, 1.02, max UDMA/33
[ 4.932000] ata1.00: configured for UDMA/33
[ 5.104000] scsi 0:0:0:0: CD-ROM PIONEER DVD-RW DVR-K17RS 1.02 PQ: 0 ANSI: 5
[ 5.104000] ahci 0000:00:1f.2: version 2.2
[ 5.104000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 5.104000] ahci 0000:00:1f.2: nr_ports (3) and implemented port map (0x3) don't match
[ 5.140000] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 5.140000] Uniform CD-ROM driver Revision: 3.20
[ 5.140000] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 5.144000] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 6.108000] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x3 impl SATA mode
[ 6.108000] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[ 6.108000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 6.108000] scsi2 : ahci
[ 6.108000] scsi3 : ahci
[ 6.108000] ata3: SATA max UDMA/133 cmd 0xf882c100 ctl 0x00000000 bmdma 0x00000000 irq 11
[ 6.108000] ata4: SATA max UDMA/133 cmd 0xf882c180 ctl 0x00000000 bmdma 0x00000000 irq 11
[ 6.592000] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 6.592000] ata3.00: ATA-8: Hitachi HTS542512K9SA00, BB2OC31P, max UDMA/133
[ 6.592000] ata3.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 6.592000] ata3.00: configured for UDMA/133
[ 6.904000] ata4: SATA link down (SStatus 0 SControl 300)
[ 6.904000] scsi 2:0:0:0: Direct-Access ATA Hitachi HTS54251 BB2O PQ: 0 ANSI: 5
[ 6.904000] scsi 2:0:0:0: Attached scsi generic sg1 type 0
[ 6.908000] sd 2:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[ 6.908000] sd 2:0:0:0: [sda] Write Protect is off
[ 6.908000] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.908000] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.908000] sd 2:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[ 6.908000] sd 2:0:0:0: [sda] Write Protect is off
[ 6.908000] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.908000] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.908000] sda: sda1 sda2 < sda5 >
[ 6.952000] sd 2:0:0:0: [sda] Attached SCSI disk
[ 7.116000] Attempting manual resume
[ 7.116000] swsusp: Resume From Partition 8:5
[ 7.116000] PM: Checking swsusp image.
[ 7.116000] PM: Resume from disk failed.
[ 7.156000] kjournald starting. Commit interval 5 seconds
[ 7.156000] EXT3-fs: mounted filesystem with ordered data mode.
[ 14.504000] Linux agpgart interface v0.102 (c) Dave Jones
[ 14.520000] agpgart: Detected an Intel 965GM Chipset.
[ 14.520000] agpgart: Detected 7676K stolen memory.
[ 14.532000] agpgart: AGP aperture is 256M @ 0x40000000
[ 14.540000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 14.544000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 15.904000] ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 11
[ 15.904000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> Link [LNKG] -> GSI 11 (level, low) -> IRQ 11
[ 15.904000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 15.920000] Linux video capture interface: v2.00
[ 15.984000] uvcvideo: Found UVC 1.00 device Acer CrystalEye webcam (064e:a101)
[ 15.988000] usbcore: registered new interface driver uvcvideo
[ 15.988000] USB Video Class driver (v0.1.0)
[ 16.036000] input: PS/2 Mouse as /class/input/input2
[ 16.068000] input: AlpsPS/2 ALPS GlidePoint as /class/input/input3
[ 16.836000] ALSA /build/buildd/linux-backports-modules-2.6.22-2.6.22/debian/build/build-generic/sound/pci/hda/patch_si3054.c:238: si3054: cannot initialize. EXT MID = 0000
[ 17.088000] lp: driver loaded but no devices found
[ 17.176000] ath_hal: module license 'Proprietary' taints kernel.
[ 17.176000] ath_hal: 0.10.2.2-ATHEROS (AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133, RF2425)
[ 17.264000] wlan: 0.8.4.2 (svn r2756)
[ 17.308000] ath_pci: 0.9.4.5 (svn r2756)
[ 17.308000] ACPI: PCI Interrupt 0000:06:00.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 17.308000] PCI: Setting latency timer of device 0000:06:00.0 to 64
[ 17.800000] ath_pci: switching rfkill capability off
[ 17.828000] ath_rate_sample: 1.2 (svn r2756)
[ 17.832000] ath_pci: switching per-packet transmit power control off
[ 17.836000] wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
[ 17.836000] wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[ 17.836000] wifi0: H/W encryption support: WEP AES AES_CCM TKIP
[ 17.836000] wifi0: mac 14.2 phy 7.0 radio 10.2
[ 17.836000] wifi0: Use hw queue 1 for WME_AC_BE traffic
[ 17.836000] wifi0: Use hw queue 0 for WME_AC_BK traffic
[ 17.836000] wifi0: Use hw queue 2 for WME_AC_VI traffic
[ 17.836000] wifi0: Use hw queue 3 for WME_AC_VO traffic
[ 17.836000] wifi0: Use hw queue 8 for CAB traffic
[ 17.836000] wifi0: Use hw queue 9 for beacons
[ 17.892000] wifi0: Atheros 5424/2424: mem=0x54100000, irq=11
[ 17.948000] Adding 3004112k swap on /dev/sda5. Priority:-1 extents:1 across:3004112k
[ 18.412000] EXT3 FS on sda1, internal journal
[ 19.604000] ACPI: Battery Slot [BAT0] (battery present)
[ 19.816000] No dock devices found.
[ 19.992000] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 20.100000] ACPI: Video Device [OVGA] (multi-head: yes rom: no post: no)
[ 20.152000] ACPI: AC Adapter [AC] (off-line)
[ 20.224000] input: Power Button (FF) as /class/input/input4
[ 20.228000] ACPI: Power Button (FF) [PWRF]
[ 20.256000] input: Power Button (CM) as /class/input/input5
[ 20.260000] ACPI: Power Button (CM) [PWRB]
[ 20.288000] input: Lid Switch as /class/input/input6
[ 20.292000] ACPI: Lid Switch [LID0]
[ 20.324000] input: Sleep Button (CM) as /class/input/input7
[ 20.328000] ACPI: Sleep Button (CM) [SLPB]
[ 22.036000] PM: Writing back config space on device 0000:05:00.0 at offset c (was fbff0000, writing 0)
[ 22.180000] ppdev: user-space parallel port driver
[ 22.548000] audit(1201486373.206:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=5011 profile="/usr/sbin/cupsd"
[ 22.588000] apm: BIOS not found.
[ 22.800000] Failure registering capabilities with primary security module.
[ 23.000000] Bluetooth: Core ver 2.11
[ 23.000000] NET: Registered protocol family 31
[ 23.000000] Bluetooth: HCI device and connection manager initialized
[ 23.000000] Bluetooth: HCI socket layer initialized
[ 23.012000] Bluetooth: L2CAP ver 2.8
[ 23.012000] Bluetooth: L2CAP socket layer initialized
[ 23.116000] Bluetooth: RFCOMM socket layer initialized
[ 23.116000] Bluetooth: RFCOMM TTY layer initialized
[ 23.116000] Bluetooth: RFCOMM ver 1.8
[ 27.048000] [drm] Initialized drm 1.1.0 20060810
[ 27.052000] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 27.056000] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 72.108000] NET: Registered protocol family 17
[ 89.560000] NET: Registered protocol family 10
[ 89.560000] lo: Disabled Privacy Extensions
[ 89.560000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 99.840000] wlan2: no IPv6 routers present
[ 297.384000] APIC error on CPU0: 00(40)
[ 471.848000] APIC error on CPU0: 40(40)
[ 478.952000] APIC error on CPU0: 40(40)
[ 536.332000] atkbd.c: Unknown key pressed (translated set 2, code 0xb3 on isa0060/serio0).
[ 536.332000] atkbd.c: Use 'setkeycodes e033 <keycode>' to make it known.
[ 536.508000] atkbd.c: Unknown key released (translated set 2, code 0xb3 on isa0060/serio0).
[ 536.508000] atkbd.c: Use 'setkeycodes e033 <keycode>' to make it known.
[ 563.392000] APIC error on CPU0: 40(40)
[ 575.664000] APIC error on CPU0: 40(40)
[ 638.276000] APIC error on CPU0: 40(40)
[ 651.180000] APIC error on CPU0: 40(40)
[ 671.168000] APIC error on CPU0: 40(40)
[ 683.408000] APIC error on CPU0: 40(40)
[ 707.840000] APIC error on CPU0: 40(40)
[ 718.124000] APIC error on CPU0: 40(40)
[ 751.104000] APIC error on CPU0: 40(40)
[ 763.516000] APIC error on CPU0: 40(40)
[ 800.524000] APIC error on CPU0: 40(40)
[ 813.180000] APIC error on CPU0: 40(40)
[ 850.560000] APIC error on CPU0: 40(40)
[ 869.404000] APIC error on CPU0: 40(40)
[ 916.016000] APIC error on CPU0: 40(40)
[ 934.160000] APIC error on CPU0: 40(40)
[ 955.860000] APIC error on CPU0: 40(40)
[ 969.576000] APIC error on CPU0: 40(40)
[ 996.780000] APIC error on CPU0: 40(40)
[ 1012.016000] APIC error on CPU0: 40(40)
[ 1052.752000] APIC error on CPU0: 40(40)
[ 1069.812000] APIC error on CPU0: 40(40)
[ 1107.064000] APIC error on CPU0: 40(40)
[ 1126.792000] APIC error on CPU0: 40(40)
[ 1133.876000] APIC error on CPU0: 40(40)
[ 1146.324000] APIC error on CPU0: 40(40)
[ 1192.504000] APIC error on CPU0: 40(40)
[ 1211.208000] APIC error on CPU0: 40(40)
[ 1255.044000] APIC error on CPU0: 40(40)
[ 1272.416000] APIC error on CPU0: 40(40)
[ 1315.504000] APIC error on CPU0: 40(40)
[ 1336.352000] APIC error on CPU0: 40(40)
[ 1375.660000] APIC error on CPU0: 40(40)
[ 1396.556000] APIC error on CPU0: 40(40)
[ 1415.308000] APIC error on CPU0: 40(40)
[ 1431.152000] APIC error on CPU0: 40(40)
[ 1471.036000] APIC error on CPU0: 40(40)
[ 1494.188000] APIC error on CPU0: 40(40)
[-- Attachment #3: dmidecode --]
[-- Type: application/octet-stream, Size: 11106 bytes --]
# dmidecode 2.9
SMBIOS 2.4 present.
36 structures occupying 1423 bytes.
Table at 0x000E2B30.
Handle 0x0000, DMI type 0, 24 bytes
BIOS Information
Vendor: Acer
Version: V1.19
Release Date: 10/15/2007
ROM Size: 1024 kB
Characteristics:
PCI is supported
BIOS is upgradeable
BIOS shadowing is allowed
Boot from CD is supported
Selectable boot is supported
BIOS ROM is socketed
EDD is supported
Japanese floppy for NEC 9800 1.2 MB is supported (int 13h)
Japanese floppy for Toshiba 1.2 MB is supported (int 13h)
5.25"/360 KB floppy services are supported (int 13h)
5.25"/1.2 MB floppy services are supported (int 13h)
3.5"/720 KB floppy services are supported (int 13h)
3.5"/2.88 MB floppy services are supported (int 13h)
8042 keyboard services are supported (int 9h)
CGA/mono video services are supported (int 10h)
ACPI is supported
USB legacy is supported
Targeted content distribution is supported
Handle 0x0001, DMI type 1, 27 bytes
System Information
Manufacturer: Acer
Product Name: Aspire 5315
Version: V1.19
Serial Number: LXALE0Y0087432444A1601
UUID: 2C16999A-0750-76F3-713D-001B38670B72
Wake-up Type: Power Switch
SKU Number: None
Family: None
Handle 0x0002, DMI type 2, 16 bytes
Base Board Information
Manufacturer: Acer
Product Name: Acadia
Version: V1.19
Serial Number: Base Board Serial Number
Asset Tag: Base Board Asset Tag
Features:
Board is a hosting board
Board is replaceable
Location In Chassis: Base Board Chassis Location
Chassis Handle: 0x0003
Type: Motherboard
Contained Object Handles: 0
Handle 0x0003, DMI type 3, 22 bytes
Chassis Information
Manufacturer: Acer
Type: Other
Lock: Not Present
Version: V1.19
Serial Number: Chassis Serial Number
Asset Tag:
Boot-up State: Safe
Power Supply State: Safe
Thermal State: Safe
Security Status: None
OEM Information: 0x00000000
Height: Unspecified
Number Of Power Cords: 1
Contained Elements: 0
Handle 0x0004, DMI type 9, 13 bytes
System Slot Information
Designation: J6C1
Type: x16 PCI Express
Current Usage: Available
Length: Other
ID: 0
Characteristics:
PME signal is supported
Hot-plug devices are supported
Handle 0x0005, DMI type 9, 13 bytes
System Slot Information
Designation: J8C1
Type: x1 PCI Express
Current Usage: Available
Length: Other
ID: 0
Characteristics:
PME signal is supported
Hot-plug devices are supported
Handle 0x0006, DMI type 9, 13 bytes
System Slot Information
Designation: J7C1
Type: x1 PCI Express
Current Usage: Available
Length: Other
ID: 1
Characteristics:
PME signal is supported
Hot-plug devices are supported
Handle 0x0007, DMI type 9, 13 bytes
System Slot Information
Designation: J8D1
Type: x1 PCI Express
Current Usage: Available
Length: Other
ID: 2
Characteristics:
PME signal is supported
Hot-plug devices are supported
Handle 0x0008, DMI type 9, 13 bytes
System Slot Information
Designation: J8B1
Type: 32-bit PCI
Current Usage: Available
Length: Long
ID: 3
Characteristics:
5.0 V is provided
3.3 V is provided
Cardbus is supported
Modem ring resume is supported
PME signal is supported
SMBus signal is supported
Handle 0x0009, DMI type 9, 13 bytes
System Slot Information
Designation: J9B1
Type: 32-bit PCI
Current Usage: Available
Length: Long
ID: 4
Characteristics:
5.0 V is provided
3.3 V is provided
Cardbus is supported
Modem ring resume is supported
PME signal is supported
SMBus signal is supported
Handle 0x000A, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: PS/2
Internal Connector Type: None
External Reference Designator: Keyboard
External Connector Type: PS/2
Port Type: Keyboard Port
Handle 0x000B, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: PS/2
Internal Connector Type: None
External Reference Designator: Mouse
External Connector Type: PS/2
Port Type: Mouse Port
Handle 0x000C, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB
Internal Connector Type: None
External Reference Designator: USB 1
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x000D, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB
Internal Connector Type: None
External Reference Designator: USB 2
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x000E, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB
Internal Connector Type: None
External Reference Designator: USB 3
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x000F, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: LAN
Internal Connector Type: None
External Reference Designator: Network
External Connector Type: RJ-45
Port Type: Network Port
Handle 0x0010, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J2H2
Internal Connector Type: On Board IDE
External Reference Designator: OnBoard Primary IDE
External Connector Type: None
Port Type: Other
Handle 0x0011, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J2H1
Internal Connector Type: On Board IDE
External Reference Designator: OnBoard Secondary IDE
External Connector Type: None
Port Type: Other
Handle 0x0012, DMI type 10, 6 bytes
On Board Device Information
Type: Video
Status: Enabled
Description: Intel Video Graphics Controller
Handle 0x0013, DMI type 10, 6 bytes
On Board Device Information
Type: Ethernet
Status: Enabled
Description: Broadcom Lan Controller
Handle 0x0014, DMI type 11, 6 bytes
OEM Strings
String 1: EFI Software for Nettiling and Poyang
Handle 0x0015, DMI type 12, 5 bytes
System Configuration Options
Option 1: J1D4:1-2,5-6,9-10Default;2-3CMOS clr,6-7Pswd clr,10-11Recovery
Handle 0x0016, DMI type 21, 7 bytes
Built-in Pointing Device
Type: Touch Pad
Interface: PS/2
Buttons: 4
Handle 0x0017, DMI type 22, 26 bytes
Portable Battery
Location: Internal Battery
Manufacturer: Sony
Serial Number: Not Supported
Name: Li-ion(6cell)
Chemistry: Lithium Ion
Design Capacity: 51840 mWh
Design Voltage: 10800 mV
SBDS Version: Not Specified
Maximum Error: Unknown
SBDS Manufacture Date: 1980-00-00
OEM-specific Information: 0xFFFFFFFF
Handle 0x0018, DMI type 16, 15 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 2 GB
Error Information Handle: Not Provided
Number Of Devices: 2
Handle 0x0019, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x0018
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: None
Locator: DIMM0
Bank Locator: BANK 0
Type: DDR2
Type Detail: Synchronous
Speed: 533 MHz (1.9 ns)
Manufacturer: 0xCE00000000000000
Serial Number: 0x8605AA8C
Asset Tag: Unknown
Part Number: 0x4D342037305432393533455A332D43453620
Handle 0x001A, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: DIMM0
Bank Connections: 0 0
Current Speed: 1 ns
Type: DIMM
Installed Size: 1024 MB (Single-bank Connection)
Enabled Size: 1024 MB (Single-bank Connection)
Error Status: OK
Handle 0x001B, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0003FFFFFFF
Range Size: 1 GB
Physical Device Handle: 0x0019
Memory Array Mapped Address Handle: 0x001E
Partition Row Position: 1
Handle 0x001C, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x0018
Error Information Handle: Not Provided
Total Width: Unknown
Data Width: Unknown
Size: No Module Installed
Form Factor: DIMM
Set: None
Locator: DIMM2
Bank Locator: BANK 2
Type: DDR2
Type Detail: None
Speed: Unknown
Manufacturer: NO DIMM
Serial Number: NO DIMM
Asset Tag: NO DIMM
Part Number: NO DIMM
Handle 0x001D, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: DIMM2
Bank Connections: 0 0
Current Speed: Unknown
Type: DIMM
Installed Size: Not Installed
Enabled Size: Not Installed
Error Status: OK
Handle 0x001E, DMI type 19, 15 bytes
Memory Array Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0003FFFFFFF
Range Size: 1 GB
Physical Array Handle: 0x0018
Partition Width: 0
Handle 0x001F, DMI type 4, 35 bytes
Processor Information
Socket Designation: uPGA-478
Type: Central Processor
Family: Pentium M
Manufacturer: Intel(R) Corporation
ID: 61 06 01 00 FF FB EB AF
Signature: Type 0, Family 6, Model 22, Stepping 1
Flags:
FPU (Floating-point unit on-chip)
VME (Virtual mode extension)
DE (Debugging extension)
PSE (Page size extension)
TSC (Time stamp counter)
MSR (Model specific registers)
PAE (Physical address extension)
MCE (Machine check exception)
CX8 (CMPXCHG8 instruction supported)
APIC (On-chip APIC hardware supported)
SEP (Fast system call)
MTRR (Memory type range registers)
PGE (Page global enable)
MCA (Machine check architecture)
CMOV (Conditional move instruction supported)
PAT (Page attribute table)
PSE-36 (36-bit page size extension)
CLFSH (CLFLUSH instruction supported)
DS (Debug store)
ACPI (ACPI supported)
MMX (MMX technology supported)
FXSR (Fast floating-point save and restore)
SSE (Streaming SIMD extensions)
SSE2 (Streaming SIMD extensions 2)
SS (Self-snoop)
TM (Thermal monitor supported)
PBE (Pending break enabled)
Version: Intel(R) Celeron(R) CPU 530 @ 1.73GHz
Voltage: 1.6 V
External Clock: 133 MHz
Max Speed: 1733 MHz
Current Speed: 1733 MHz
Status: Populated, Enabled
Upgrade: Socket 478
L1 Cache Handle: 0x0022
L2 Cache Handle: 0x0020
L3 Cache Handle: Not Provided
Serial Number: NotSupport
Asset Tag: FFFF
Part Number: FFFF
Handle 0x0020, DMI type 7, 19 bytes
Cache Information
Socket Designation: L2 Cache
Configuration: Enabled, Not Socketed, Level 2
Operational Mode: Write Back
Location: Internal
Installed Size: 1024 KB
Maximum Size: 1024 KB
Supported SRAM Types:
Asynchronous
Installed SRAM Type: Asynchronous
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Unified
Associativity: 4-way Set-associative
Handle 0x0021, DMI type 7, 19 bytes
Cache Information
Socket Designation: L1 Cache
Configuration: Enabled, Not Socketed, Level 1
Operational Mode: Write Back
Location: Internal
Installed Size: 32 KB
Maximum Size: 32 KB
Supported SRAM Types:
Asynchronous
Installed SRAM Type: Asynchronous
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Instruction
Associativity: 8-way Set-associative
Handle 0x0022, DMI type 7, 19 bytes
Cache Information
Socket Designation: L1 Cache
Configuration: Enabled, Not Socketed, Level 1
Operational Mode: Write Back
Location: Internal
Installed Size: 32 KB
Maximum Size: 32 KB
Supported SRAM Types:
Asynchronous
Installed SRAM Type: Asynchronous
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Data
Associativity: 8-way Set-associative
Handle 0x0023, DMI type 127, 4 bytes
End Of Table
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: acer aspire 5315, Ubuntu 2.6.22-14-generic, kernel says send dmidecode, acpi not working correctly
2008-01-28 2:42 acer aspire 5315, Ubuntu 2.6.22-14-generic, kernel says send dmidecode, acpi not working correctly Ibiltari
@ 2008-01-28 10:51 ` Carlos Corbacho
2008-01-28 10:55 ` Carlos Corbacho
[not found] ` <200802031731.43626.lenb@kernel.org>
2 siblings, 0 replies; 5+ messages in thread
From: Carlos Corbacho @ 2008-01-28 10:51 UTC (permalink / raw)
To: Ibiltari; +Cc: linux-acpi
On Monday 28 January 2008 02:42:07 Ibiltari wrote:
> Hi, cpu throtling is not aparently recognised and lots of "APIC error
> on CPU0: 40(40)" messages.
>
> Hope it helps, thanks for your work!!
http://bugzilla.kernel.org/show_bug.cgi?id=6404
There were also a thread on LKML about this (as it happens on various
chipsets - including the ATI one in my Aspire 5020). Last I read though,
no-one really had much idea what was causing this to trigger.
-Carlos
--
E-Mail: carlos@strangeworlds.co.uk
Web: strangeworlds.co.uk
GPG Key ID: 0x23EE722D
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: acer aspire 5315, Ubuntu 2.6.22-14-generic, kernel says send dmidecode, acpi not working correctly
2008-01-28 2:42 acer aspire 5315, Ubuntu 2.6.22-14-generic, kernel says send dmidecode, acpi not working correctly Ibiltari
2008-01-28 10:51 ` Carlos Corbacho
@ 2008-01-28 10:55 ` Carlos Corbacho
[not found] ` <200802031731.43626.lenb@kernel.org>
2 siblings, 0 replies; 5+ messages in thread
From: Carlos Corbacho @ 2008-01-28 10:55 UTC (permalink / raw)
To: Ibiltari; +Cc: linux-acpi
On Monday 28 January 2008 02:42:07 Ibiltari wrote:
> Hi, cpu throtling is not aparently recognised and lots of "APIC error
> on CPU0: 40(40)" messages.
Just to make it clear from my previous e-mail - the APIC error message is
annoying, but mostly harmless and unrelated to your CPU problem.
For the CPU problem with ACPI, we will need the output of acpidump.
-Carlos
--
E-Mail: carlos@strangeworlds.co.uk
Web: strangeworlds.co.uk
GPG Key ID: 0x23EE722D
^ permalink raw reply [flat|nested] 5+ messages in thread[parent not found: <200802031731.43626.lenb@kernel.org>]
end of thread, other threads:[~2008-02-05 18:22 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-01-28 2:42 acer aspire 5315, Ubuntu 2.6.22-14-generic, kernel says send dmidecode, acpi not working correctly Ibiltari
2008-01-28 10:51 ` Carlos Corbacho
2008-01-28 10:55 ` Carlos Corbacho
[not found] ` <200802031731.43626.lenb@kernel.org>
[not found] ` <de8605510802031823h2e928a0cr29ca31eaf5768406@mail.gmail.com>
2008-02-04 5:54 ` Len Brown
[not found] ` <de8605510802040955v2b11ee4ai950f7cc3839f9148@mail.gmail.com>
2008-02-05 17:34 ` acer aspire 5315, Ubuntu 2.6.22-14-generic, ACPI Exception (processor_core-0783): AE_NOT_FOUND Len Brown
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.