From: Bruno Randolf <bruno@thinktube.com>
To: ath5k-devel@lists.ath5k.org
Cc: mcgrof@gmail.com, jirislaby@gmail.com, mickflemm@gmail.com,
linux-wireless@vger.kernel.org, linville@tuxdriver.com,
johannes@sipsolutions.net, flamingice@sourmilk.net,
jbenc@suse.cz
Subject: [PATCH 1/2] mac80211: move function ieee80211_sta_join_ibss()
Date: Tue, 05 Feb 2008 19:49:28 +0900 [thread overview]
Message-ID: <20080205104928.9379.23568.stgit@one> (raw)
In-Reply-To: <20080205104543.9379.47253.stgit@one>
this moves ieee80211_sta_join_ibss() up for the next patch (ibss merge).
Signed-off-by: Bruno Randolf <bruno@thinktube.com>
---
net/mac80211/ieee80211_sta.c | 317 +++++++++++++++++++++---------------------
1 files changed, 159 insertions(+), 158 deletions(-)
diff --git a/net/mac80211/ieee80211_sta.c b/net/mac80211/ieee80211_sta.c
index 7be1e73..08f89fa 100644
--- a/net/mac80211/ieee80211_sta.c
+++ b/net/mac80211/ieee80211_sta.c
@@ -2030,6 +2030,165 @@ void ieee80211_rx_bss_list_deinit(struct net_device *dev)
}
+static int ieee80211_sta_join_ibss(struct net_device *dev,
+ struct ieee80211_if_sta *ifsta,
+ struct ieee80211_sta_bss *bss)
+{
+ struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+ int res, rates, i, j;
+ struct sk_buff *skb;
+ struct ieee80211_mgmt *mgmt;
+ struct ieee80211_tx_control control;
+ struct rate_selection ratesel;
+ u8 *pos;
+ struct ieee80211_sub_if_data *sdata;
+ struct ieee80211_supported_band *sband;
+
+ sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
+
+ /* Remove possible STA entries from other IBSS networks. */
+ sta_info_flush(local, NULL);
+
+ if (local->ops->reset_tsf) {
+ /* Reset own TSF to allow time synchronization work. */
+ local->ops->reset_tsf(local_to_hw(local));
+ }
+ memcpy(ifsta->bssid, bss->bssid, ETH_ALEN);
+ res = ieee80211_if_config(dev);
+ if (res)
+ return res;
+
+ local->hw.conf.beacon_int = bss->beacon_int >= 10 ? bss->beacon_int : 10;
+
+ sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+ sdata->drop_unencrypted = bss->capability &
+ WLAN_CAPABILITY_PRIVACY ? 1 : 0;
+
+ res = ieee80211_set_freq(local, bss->freq);
+
+ if (local->oper_channel->flags & IEEE80211_CHAN_NO_IBSS) {
+ printk(KERN_DEBUG "%s: IBSS not allowed on frequency "
+ "%d MHz\n", dev->name, local->oper_channel->center_freq);
+ return -1;
+ }
+
+ /* Set beacon template */
+ skb = dev_alloc_skb(local->hw.extra_tx_headroom + 400);
+ do {
+ if (!skb)
+ break;
+
+ skb_reserve(skb, local->hw.extra_tx_headroom);
+
+ mgmt = (struct ieee80211_mgmt *)
+ skb_put(skb, 24 + sizeof(mgmt->u.beacon));
+ memset(mgmt, 0, 24 + sizeof(mgmt->u.beacon));
+ mgmt->frame_control = IEEE80211_FC(IEEE80211_FTYPE_MGMT,
+ IEEE80211_STYPE_BEACON);
+ memset(mgmt->da, 0xff, ETH_ALEN);
+ memcpy(mgmt->sa, dev->dev_addr, ETH_ALEN);
+ memcpy(mgmt->bssid, ifsta->bssid, ETH_ALEN);
+ mgmt->u.beacon.beacon_int =
+ cpu_to_le16(local->hw.conf.beacon_int);
+ mgmt->u.beacon.capab_info = cpu_to_le16(bss->capability);
+
+ pos = skb_put(skb, 2 + ifsta->ssid_len);
+ *pos++ = WLAN_EID_SSID;
+ *pos++ = ifsta->ssid_len;
+ memcpy(pos, ifsta->ssid, ifsta->ssid_len);
+
+ rates = bss->supp_rates_len;
+ if (rates > 8)
+ rates = 8;
+ pos = skb_put(skb, 2 + rates);
+ *pos++ = WLAN_EID_SUPP_RATES;
+ *pos++ = rates;
+ memcpy(pos, bss->supp_rates, rates);
+
+ if (bss->band == IEEE80211_BAND_2GHZ) {
+ pos = skb_put(skb, 2 + 1);
+ *pos++ = WLAN_EID_DS_PARAMS;
+ *pos++ = 1;
+ *pos++ = ieee80211_frequency_to_channel(bss->freq);
+ }
+
+ pos = skb_put(skb, 2 + 2);
+ *pos++ = WLAN_EID_IBSS_PARAMS;
+ *pos++ = 2;
+ /* FIX: set ATIM window based on scan results */
+ *pos++ = 0;
+ *pos++ = 0;
+
+ if (bss->supp_rates_len > 8) {
+ rates = bss->supp_rates_len - 8;
+ pos = skb_put(skb, 2 + rates);
+ *pos++ = WLAN_EID_EXT_SUPP_RATES;
+ *pos++ = rates;
+ memcpy(pos, &bss->supp_rates[8], rates);
+ }
+
+ memset(&control, 0, sizeof(control));
+ rate_control_get_rate(dev, sband, skb, &ratesel);
+ if (!ratesel.rate) {
+ printk(KERN_DEBUG "%s: Failed to determine TX rate "
+ "for IBSS beacon\n", dev->name);
+ break;
+ }
+ control.vif = &sdata->vif;
+ control.tx_rate = ratesel.rate;
+ if (sdata->bss_conf.use_short_preamble &&
+ ratesel.rate->flags & IEEE80211_RATE_SHORT_PREAMBLE)
+ control.flags |= IEEE80211_TXCTL_SHORT_PREAMBLE;
+ control.antenna_sel_tx = local->hw.conf.antenna_sel_tx;
+ control.flags |= IEEE80211_TXCTL_NO_ACK;
+ control.retry_limit = 1;
+
+ ifsta->probe_resp = skb_copy(skb, GFP_ATOMIC);
+ if (ifsta->probe_resp) {
+ mgmt = (struct ieee80211_mgmt *)
+ ifsta->probe_resp->data;
+ mgmt->frame_control =
+ IEEE80211_FC(IEEE80211_FTYPE_MGMT,
+ IEEE80211_STYPE_PROBE_RESP);
+ } else {
+ printk(KERN_DEBUG "%s: Could not allocate ProbeResp "
+ "template for IBSS\n", dev->name);
+ }
+
+ if (local->ops->beacon_update &&
+ local->ops->beacon_update(local_to_hw(local),
+ skb, &control) == 0) {
+ printk(KERN_DEBUG "%s: Configured IBSS beacon "
+ "template\n", dev->name);
+ skb = NULL;
+ }
+
+ rates = 0;
+ sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
+ for (i = 0; i < bss->supp_rates_len; i++) {
+ int bitrate = (bss->supp_rates[i] & 0x7f) * 5;
+ for (j = 0; j < sband->n_bitrates; j++)
+ if (sband->bitrates[j].bitrate == bitrate)
+ rates |= BIT(j);
+ }
+ ifsta->supp_rates_bits[local->hw.conf.channel->band] = rates;
+ } while (0);
+
+ if (skb) {
+ printk(KERN_DEBUG "%s: Failed to configure IBSS beacon "
+ "template\n", dev->name);
+ dev_kfree_skb(skb);
+ }
+
+ ifsta->state = IEEE80211_IBSS_JOINED;
+ mod_timer(&ifsta->timer, jiffies + IEEE80211_IBSS_MERGE_INTERVAL);
+
+ ieee80211_rx_bss_put(dev, bss);
+
+ return res;
+}
+
+
static void ieee80211_rx_bss_info(struct net_device *dev,
struct ieee80211_mgmt *mgmt,
size_t len,
@@ -2894,164 +3053,6 @@ static int ieee80211_sta_config_auth(struct net_device *dev,
return -1;
}
-static int ieee80211_sta_join_ibss(struct net_device *dev,
- struct ieee80211_if_sta *ifsta,
- struct ieee80211_sta_bss *bss)
-{
- struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
- int res, rates, i, j;
- struct sk_buff *skb;
- struct ieee80211_mgmt *mgmt;
- struct ieee80211_tx_control control;
- struct rate_selection ratesel;
- u8 *pos;
- struct ieee80211_sub_if_data *sdata;
- struct ieee80211_supported_band *sband;
-
- sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
-
- /* Remove possible STA entries from other IBSS networks. */
- sta_info_flush(local, NULL);
-
- if (local->ops->reset_tsf) {
- /* Reset own TSF to allow time synchronization work. */
- local->ops->reset_tsf(local_to_hw(local));
- }
- memcpy(ifsta->bssid, bss->bssid, ETH_ALEN);
- res = ieee80211_if_config(dev);
- if (res)
- return res;
-
- local->hw.conf.beacon_int = bss->beacon_int >= 10 ? bss->beacon_int : 10;
-
- sdata = IEEE80211_DEV_TO_SUB_IF(dev);
- sdata->drop_unencrypted = bss->capability &
- WLAN_CAPABILITY_PRIVACY ? 1 : 0;
-
- res = ieee80211_set_freq(local, bss->freq);
-
- if (local->oper_channel->flags & IEEE80211_CHAN_NO_IBSS) {
- printk(KERN_DEBUG "%s: IBSS not allowed on frequency "
- "%d MHz\n", dev->name, local->oper_channel->center_freq);
- return -1;
- }
-
- /* Set beacon template based on scan results */
- skb = dev_alloc_skb(local->hw.extra_tx_headroom + 400);
- do {
- if (!skb)
- break;
-
- skb_reserve(skb, local->hw.extra_tx_headroom);
-
- mgmt = (struct ieee80211_mgmt *)
- skb_put(skb, 24 + sizeof(mgmt->u.beacon));
- memset(mgmt, 0, 24 + sizeof(mgmt->u.beacon));
- mgmt->frame_control = IEEE80211_FC(IEEE80211_FTYPE_MGMT,
- IEEE80211_STYPE_BEACON);
- memset(mgmt->da, 0xff, ETH_ALEN);
- memcpy(mgmt->sa, dev->dev_addr, ETH_ALEN);
- memcpy(mgmt->bssid, ifsta->bssid, ETH_ALEN);
- mgmt->u.beacon.beacon_int =
- cpu_to_le16(local->hw.conf.beacon_int);
- mgmt->u.beacon.capab_info = cpu_to_le16(bss->capability);
-
- pos = skb_put(skb, 2 + ifsta->ssid_len);
- *pos++ = WLAN_EID_SSID;
- *pos++ = ifsta->ssid_len;
- memcpy(pos, ifsta->ssid, ifsta->ssid_len);
-
- rates = bss->supp_rates_len;
- if (rates > 8)
- rates = 8;
- pos = skb_put(skb, 2 + rates);
- *pos++ = WLAN_EID_SUPP_RATES;
- *pos++ = rates;
- memcpy(pos, bss->supp_rates, rates);
-
- if (bss->band == IEEE80211_BAND_2GHZ) {
- pos = skb_put(skb, 2 + 1);
- *pos++ = WLAN_EID_DS_PARAMS;
- *pos++ = 1;
- *pos++ = ieee80211_frequency_to_channel(bss->freq);
- }
-
- pos = skb_put(skb, 2 + 2);
- *pos++ = WLAN_EID_IBSS_PARAMS;
- *pos++ = 2;
- /* FIX: set ATIM window based on scan results */
- *pos++ = 0;
- *pos++ = 0;
-
- if (bss->supp_rates_len > 8) {
- rates = bss->supp_rates_len - 8;
- pos = skb_put(skb, 2 + rates);
- *pos++ = WLAN_EID_EXT_SUPP_RATES;
- *pos++ = rates;
- memcpy(pos, &bss->supp_rates[8], rates);
- }
-
- memset(&control, 0, sizeof(control));
- rate_control_get_rate(dev, sband, skb, &ratesel);
- if (!ratesel.rate) {
- printk(KERN_DEBUG "%s: Failed to determine TX rate "
- "for IBSS beacon\n", dev->name);
- break;
- }
- control.vif = &sdata->vif;
- control.tx_rate = ratesel.rate;
- if (sdata->bss_conf.use_short_preamble &&
- ratesel.rate->flags & IEEE80211_RATE_SHORT_PREAMBLE)
- control.flags |= IEEE80211_TXCTL_SHORT_PREAMBLE;
- control.antenna_sel_tx = local->hw.conf.antenna_sel_tx;
- control.flags |= IEEE80211_TXCTL_NO_ACK;
- control.retry_limit = 1;
-
- ifsta->probe_resp = skb_copy(skb, GFP_ATOMIC);
- if (ifsta->probe_resp) {
- mgmt = (struct ieee80211_mgmt *)
- ifsta->probe_resp->data;
- mgmt->frame_control =
- IEEE80211_FC(IEEE80211_FTYPE_MGMT,
- IEEE80211_STYPE_PROBE_RESP);
- } else {
- printk(KERN_DEBUG "%s: Could not allocate ProbeResp "
- "template for IBSS\n", dev->name);
- }
-
- if (local->ops->beacon_update &&
- local->ops->beacon_update(local_to_hw(local),
- skb, &control) == 0) {
- printk(KERN_DEBUG "%s: Configured IBSS beacon "
- "template based on scan results\n", dev->name);
- skb = NULL;
- }
-
- rates = 0;
- sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
- for (i = 0; i < bss->supp_rates_len; i++) {
- int bitrate = (bss->supp_rates[i] & 0x7f) * 5;
- for (j = 0; j < sband->n_bitrates; j++)
- if (sband->bitrates[j].bitrate == bitrate)
- rates |= BIT(j);
- }
- ifsta->supp_rates_bits[local->hw.conf.channel->band] = rates;
- } while (0);
-
- if (skb) {
- printk(KERN_DEBUG "%s: Failed to configure IBSS beacon "
- "template\n", dev->name);
- dev_kfree_skb(skb);
- }
-
- ifsta->state = IEEE80211_IBSS_JOINED;
- mod_timer(&ifsta->timer, jiffies + IEEE80211_IBSS_MERGE_INTERVAL);
-
- ieee80211_rx_bss_put(dev, bss);
-
- return res;
-}
-
static int ieee80211_sta_create_ibss(struct net_device *dev,
struct ieee80211_if_sta *ifsta)
next prev parent reply other threads:[~2008-02-05 10:49 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-02-05 10:49 [PATCH 0/2] ibss merge resend Bruno Randolf
2008-02-05 10:49 ` Bruno Randolf [this message]
2008-02-05 10:49 ` [PATCH 2/2] mac80211: enable IBSS merging Bruno Randolf
2008-02-05 11:08 ` Johannes Berg
2008-02-06 2:46 ` [PATCH] addressing johannes latest comments and adding a channel check Bruno Randolf
2008-02-06 2:59 ` [ath5k-devel] " bruno randolf
2008-02-06 2:49 ` [PATCH] mac80211: enable IBSS merging Bruno Randolf
2008-02-06 23:52 ` Johannes Berg
2008-02-08 9:25 ` Luis R. Rodriguez
2008-02-12 3:25 ` bruno randolf
2008-02-12 9:50 ` Johannes Berg
2008-02-14 6:19 ` bruno randolf
2008-02-14 14:12 ` Johannes Berg
2008-02-12 9:52 ` Johannes Berg
2008-02-14 10:19 ` bruno randolf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080205104928.9379.23568.stgit@one \
--to=bruno@thinktube.com \
--cc=ath5k-devel@lists.ath5k.org \
--cc=flamingice@sourmilk.net \
--cc=jbenc@suse.cz \
--cc=jirislaby@gmail.com \
--cc=johannes@sipsolutions.net \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=mcgrof@gmail.com \
--cc=mickflemm@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.