From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
To: linux-ide@vger.kernel.org
Cc: linuxppc-dev@ozlabs.org,
Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>,
Benjamin Herrenschmidt <benh@kernel.crashing.org>,
linux-kernel@vger.kernel.org
Subject: [PATCH 09/11] ppc: remove ppc_ide_md
Date: Thu, 14 Feb 2008 01:37:29 +0100 [thread overview]
Message-ID: <20080214003729.12879.2159.sendpatchset@localhost.localdomain> (raw)
In-Reply-To: <20080214003621.12879.33868.sendpatchset@localhost.localdomain>
* Add special cases for pplus and prep to ide_default_{irq,io_base}()
(+ FIXMEs about the need to use IDE platform host driver instead).
* Remove no longer needed ppc_ide_md and struct ide_machdep_calls.
* Then remove <linux/ide.h> include from:
- arch/powerpc/kernel/setup_32.c
- arch/ppc/kernel/ppc_ksyms.c
- arch/ppc/kernel/setup.c
- arch/ppc/platforms/pplus.c
- arch/ppc/platforms/prep_setup.c
There should be no functional changes caused by this patch.
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
arch/powerpc/kernel/setup_32.c | 8 ------
arch/ppc/kernel/ppc_ksyms.c | 5 ----
arch/ppc/kernel/setup.c | 2 -
arch/ppc/platforms/pplus.c | 35 -----------------------------
arch/ppc/platforms/prep_setup.c | 38 --------------------------------
drivers/ide/ide.c | 4 ---
include/asm-powerpc/ide.h | 47 +++++++++++++++++++++++++++-------------
7 files changed, 32 insertions(+), 107 deletions(-)
Index: b/arch/powerpc/kernel/setup_32.c
===================================================================
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -10,9 +10,6 @@
#include <linux/reboot.h>
#include <linux/delay.h>
#include <linux/initrd.h>
-#if defined(CONFIG_IDE) || defined(CONFIG_IDE_MODULE)
-#include <linux/ide.h>
-#endif
#include <linux/tty.h>
#include <linux/bootmem.h>
#include <linux/seq_file.h>
@@ -51,11 +48,6 @@
extern void bootx_init(unsigned long r4, unsigned long phys);
-#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
-struct ide_machdep_calls ppc_ide_md;
-EXPORT_SYMBOL(ppc_ide_md);
-#endif
-
int boot_cpuid;
EXPORT_SYMBOL_GPL(boot_cpuid);
int boot_cpuid_phys;
Index: b/arch/ppc/kernel/ppc_ksyms.c
===================================================================
--- a/arch/ppc/kernel/ppc_ksyms.c
+++ b/arch/ppc/kernel/ppc_ksyms.c
@@ -12,7 +12,6 @@
#include <linux/irq.h>
#include <linux/pci.h>
#include <linux/delay.h>
-#include <linux/ide.h>
#include <linux/pm.h>
#include <linux/bitops.h>
@@ -124,10 +123,6 @@ EXPORT_SYMBOL(__ioremap);
EXPORT_SYMBOL(iounmap);
EXPORT_SYMBOL(ioremap_bot); /* aka VMALLOC_END */
-#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
-EXPORT_SYMBOL(ppc_ide_md);
-#endif
-
#ifdef CONFIG_PCI
EXPORT_SYMBOL(isa_io_base);
EXPORT_SYMBOL(isa_mem_base);
Index: b/arch/ppc/kernel/setup.c
===================================================================
--- a/arch/ppc/kernel/setup.c
+++ b/arch/ppc/kernel/setup.c
@@ -10,7 +10,6 @@
#include <linux/reboot.h>
#include <linux/delay.h>
#include <linux/initrd.h>
-#include <linux/ide.h>
#include <linux/screen_info.h>
#include <linux/bootmem.h>
#include <linux/seq_file.h>
@@ -57,7 +56,6 @@ extern void ppc6xx_idle(void);
extern void power4_idle(void);
extern boot_infos_t *boot_infos;
-struct ide_machdep_calls ppc_ide_md;
/* Used with the BI_MEMSIZE bootinfo parameter to store the memory
size value reported by the boot loader. */
Index: b/arch/ppc/platforms/pplus.c
===================================================================
--- a/arch/ppc/platforms/pplus.c
+++ b/arch/ppc/platforms/pplus.c
@@ -19,7 +19,6 @@
#include <linux/ioport.h>
#include <linux/console.h>
#include <linux/pci.h>
-#include <linux/ide.h>
#include <linux/seq_file.h>
#include <linux/root_dev.h>
@@ -668,35 +667,6 @@ static void __init pplus_init_IRQ(void)
ppc_md.progress("init_irq: exit", 0);
}
-#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
-/*
- * IDE stuff.
- */
-static int pplus_ide_default_irq(unsigned long base)
-{
- switch (base) {
- case 0x1f0:
- return 14;
- case 0x170:
- return 15;
- default:
- return 0;
- }
-}
-
-static unsigned long pplus_ide_default_io_base(int index)
-{
- switch (index) {
- case 0:
- return 0x1f0;
- case 1:
- return 0x170;
- default:
- return 0;
- }
-}
-#endif
-
#ifdef CONFIG_SMP
/* PowerPlus (MTX) support */
static int __init smp_pplus_probe(void)
@@ -862,11 +832,6 @@ platform_init(unsigned long r3, unsigned
ppc_md.find_end_of_memory = pplus_find_end_of_memory;
ppc_md.setup_io_mappings = pplus_map_io;
-#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
- ppc_ide_md.default_irq = pplus_ide_default_irq;
- ppc_ide_md.default_io_base = pplus_ide_default_io_base;
-#endif
-
#ifdef CONFIG_SERIAL_TEXT_DEBUG
ppc_md.progress = gen550_progress;
#endif /* CONFIG_SERIAL_TEXT_DEBUG */
Index: b/arch/ppc/platforms/prep_setup.c
===================================================================
--- a/arch/ppc/platforms/prep_setup.c
+++ b/arch/ppc/platforms/prep_setup.c
@@ -33,7 +33,6 @@
#include <linux/console.h>
#include <linux/timex.h>
#include <linux/pci.h>
-#include <linux/ide.h>
#include <linux/seq_file.h>
#include <linux/root_dev.h>
@@ -894,38 +893,6 @@ prep_init_IRQ(void)
i8259_init(MPC10X_MAPA_PCI_INTACK_ADDR, 0);
}
-#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
-/*
- * IDE stuff.
- */
-static int
-prep_ide_default_irq(unsigned long base)
-{
- switch (base) {
- case 0x1f0: return 13;
- case 0x170: return 13;
- case 0x1e8: return 11;
- case 0x168: return 10;
- case 0xfff0: return 14; /* MCP(N)750 ide0 */
- case 0xffe0: return 15; /* MCP(N)750 ide1 */
- default: return 0;
- }
-}
-
-static unsigned long
-prep_ide_default_io_base(int index)
-{
- switch (index) {
- case 0: return 0x1f0;
- case 1: return 0x170;
- case 2: return 0x1e8;
- case 3: return 0x168;
- default:
- return 0;
- }
-}
-#endif
-
#ifdef CONFIG_SMP
/* PReP (MTX) support */
static int __init
@@ -1070,11 +1037,6 @@ prep_init(unsigned long r3, unsigned lon
ppc_md.setup_io_mappings = prep_map_io;
-#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
- ppc_ide_md.default_irq = prep_ide_default_irq;
- ppc_ide_md.default_io_base = prep_ide_default_io_base;
-#endif
-
#ifdef CONFIG_SMP
smp_ops = &prep_smp_ops;
#endif /* CONFIG_SMP */
Index: b/drivers/ide/ide.c
===================================================================
--- a/drivers/ide/ide.c
+++ b/drivers/ide/ide.c
@@ -207,10 +207,6 @@ static void __init init_ide_data (void)
#ifdef CONFIG_IDE_ARCH_OBSOLETE_INIT
memset(&hw, 0, sizeof(hw));
ide_std_init_ports(&hw, io_addr, ctl_addr);
-# ifdef CONFIG_PPC32
- if (ppc_ide_md.ide_init_hwif)
- ppc_ide_md.ide_init_hwif(&hw, io_addr, 0, &hwif->irq);
-# endif
memcpy(hwif->io_ports, hw.io_ports, sizeof(hw.io_ports));
#endif
hwif->noprobe = !hwif->io_ports[IDE_DATA_OFFSET];
Index: b/include/asm-powerpc/ide.h
===================================================================
--- a/include/asm-powerpc/ide.h
+++ b/include/asm-powerpc/ide.h
@@ -31,30 +31,47 @@
#include <linux/hdreg.h>
#include <linux/ioport.h>
-struct ide_machdep_calls {
- int (*default_irq)(unsigned long base);
- unsigned long (*default_io_base)(int index);
- void (*ide_init_hwif)(hw_regs_t *hw,
- unsigned long data_port,
- unsigned long ctrl_port,
- int *irq);
-};
-
-extern struct ide_machdep_calls ppc_ide_md;
-
#define IDE_ARCH_OBSOLETE_DEFAULTS
+/* FIXME: use ide_platform host driver */
static __inline__ int ide_default_irq(unsigned long base)
{
- if (ppc_ide_md.default_irq)
- return ppc_ide_md.default_irq(base);
+#ifdef CONFIG_PPLUS
+ switch (base) {
+ case 0x1f0: return 14;
+ case 0x170: return 15;
+ }
+#endif
+#ifdef CONFIG_PPC_PREP
+ switch (base) {
+ case 0x1f0: return 13;
+ case 0x170: return 13;
+ case 0x1e8: return 11;
+ case 0x168: return 10;
+ case 0xfff0: return 14; /* MCP(N)750 ide0 */
+ case 0xffe0: return 15; /* MCP(N)750 ide1 */
+ }
+#endif
return 0;
}
+/* FIXME: use ide_platform host driver */
static __inline__ unsigned long ide_default_io_base(int index)
{
- if (ppc_ide_md.default_io_base)
- return ppc_ide_md.default_io_base(index);
+#ifdef CONFIG_PPLUS
+ switch (index) {
+ case 0: return 0x1f0;
+ case 1: return 0x170;
+ }
+#endif
+#ifdef CONFIG_PPC_PREP
+ switch (index) {
+ case 0: return 0x1f0;
+ case 1: return 0x170;
+ case 2: return 0x1e8;
+ case 3: return 0x168;
+ }
+#endif
return 0;
}
WARNING: multiple messages have this Message-ID (diff)
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
To: linux-ide@vger.kernel.org
Cc: linuxppc-dev@ozlabs.org, linux-kernel@vger.kernel.org,
Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Subject: [PATCH 09/11] ppc: remove ppc_ide_md
Date: Thu, 14 Feb 2008 01:37:29 +0100 [thread overview]
Message-ID: <20080214003729.12879.2159.sendpatchset@localhost.localdomain> (raw)
In-Reply-To: <20080214003621.12879.33868.sendpatchset@localhost.localdomain>
* Add special cases for pplus and prep to ide_default_{irq,io_base}()
(+ FIXMEs about the need to use IDE platform host driver instead).
* Remove no longer needed ppc_ide_md and struct ide_machdep_calls.
* Then remove <linux/ide.h> include from:
- arch/powerpc/kernel/setup_32.c
- arch/ppc/kernel/ppc_ksyms.c
- arch/ppc/kernel/setup.c
- arch/ppc/platforms/pplus.c
- arch/ppc/platforms/prep_setup.c
There should be no functional changes caused by this patch.
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
arch/powerpc/kernel/setup_32.c | 8 ------
arch/ppc/kernel/ppc_ksyms.c | 5 ----
arch/ppc/kernel/setup.c | 2 -
arch/ppc/platforms/pplus.c | 35 -----------------------------
arch/ppc/platforms/prep_setup.c | 38 --------------------------------
drivers/ide/ide.c | 4 ---
include/asm-powerpc/ide.h | 47 +++++++++++++++++++++++++++-------------
7 files changed, 32 insertions(+), 107 deletions(-)
Index: b/arch/powerpc/kernel/setup_32.c
===================================================================
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -10,9 +10,6 @@
#include <linux/reboot.h>
#include <linux/delay.h>
#include <linux/initrd.h>
-#if defined(CONFIG_IDE) || defined(CONFIG_IDE_MODULE)
-#include <linux/ide.h>
-#endif
#include <linux/tty.h>
#include <linux/bootmem.h>
#include <linux/seq_file.h>
@@ -51,11 +48,6 @@
extern void bootx_init(unsigned long r4, unsigned long phys);
-#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
-struct ide_machdep_calls ppc_ide_md;
-EXPORT_SYMBOL(ppc_ide_md);
-#endif
-
int boot_cpuid;
EXPORT_SYMBOL_GPL(boot_cpuid);
int boot_cpuid_phys;
Index: b/arch/ppc/kernel/ppc_ksyms.c
===================================================================
--- a/arch/ppc/kernel/ppc_ksyms.c
+++ b/arch/ppc/kernel/ppc_ksyms.c
@@ -12,7 +12,6 @@
#include <linux/irq.h>
#include <linux/pci.h>
#include <linux/delay.h>
-#include <linux/ide.h>
#include <linux/pm.h>
#include <linux/bitops.h>
@@ -124,10 +123,6 @@ EXPORT_SYMBOL(__ioremap);
EXPORT_SYMBOL(iounmap);
EXPORT_SYMBOL(ioremap_bot); /* aka VMALLOC_END */
-#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
-EXPORT_SYMBOL(ppc_ide_md);
-#endif
-
#ifdef CONFIG_PCI
EXPORT_SYMBOL(isa_io_base);
EXPORT_SYMBOL(isa_mem_base);
Index: b/arch/ppc/kernel/setup.c
===================================================================
--- a/arch/ppc/kernel/setup.c
+++ b/arch/ppc/kernel/setup.c
@@ -10,7 +10,6 @@
#include <linux/reboot.h>
#include <linux/delay.h>
#include <linux/initrd.h>
-#include <linux/ide.h>
#include <linux/screen_info.h>
#include <linux/bootmem.h>
#include <linux/seq_file.h>
@@ -57,7 +56,6 @@ extern void ppc6xx_idle(void);
extern void power4_idle(void);
extern boot_infos_t *boot_infos;
-struct ide_machdep_calls ppc_ide_md;
/* Used with the BI_MEMSIZE bootinfo parameter to store the memory
size value reported by the boot loader. */
Index: b/arch/ppc/platforms/pplus.c
===================================================================
--- a/arch/ppc/platforms/pplus.c
+++ b/arch/ppc/platforms/pplus.c
@@ -19,7 +19,6 @@
#include <linux/ioport.h>
#include <linux/console.h>
#include <linux/pci.h>
-#include <linux/ide.h>
#include <linux/seq_file.h>
#include <linux/root_dev.h>
@@ -668,35 +667,6 @@ static void __init pplus_init_IRQ(void)
ppc_md.progress("init_irq: exit", 0);
}
-#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
-/*
- * IDE stuff.
- */
-static int pplus_ide_default_irq(unsigned long base)
-{
- switch (base) {
- case 0x1f0:
- return 14;
- case 0x170:
- return 15;
- default:
- return 0;
- }
-}
-
-static unsigned long pplus_ide_default_io_base(int index)
-{
- switch (index) {
- case 0:
- return 0x1f0;
- case 1:
- return 0x170;
- default:
- return 0;
- }
-}
-#endif
-
#ifdef CONFIG_SMP
/* PowerPlus (MTX) support */
static int __init smp_pplus_probe(void)
@@ -862,11 +832,6 @@ platform_init(unsigned long r3, unsigned
ppc_md.find_end_of_memory = pplus_find_end_of_memory;
ppc_md.setup_io_mappings = pplus_map_io;
-#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
- ppc_ide_md.default_irq = pplus_ide_default_irq;
- ppc_ide_md.default_io_base = pplus_ide_default_io_base;
-#endif
-
#ifdef CONFIG_SERIAL_TEXT_DEBUG
ppc_md.progress = gen550_progress;
#endif /* CONFIG_SERIAL_TEXT_DEBUG */
Index: b/arch/ppc/platforms/prep_setup.c
===================================================================
--- a/arch/ppc/platforms/prep_setup.c
+++ b/arch/ppc/platforms/prep_setup.c
@@ -33,7 +33,6 @@
#include <linux/console.h>
#include <linux/timex.h>
#include <linux/pci.h>
-#include <linux/ide.h>
#include <linux/seq_file.h>
#include <linux/root_dev.h>
@@ -894,38 +893,6 @@ prep_init_IRQ(void)
i8259_init(MPC10X_MAPA_PCI_INTACK_ADDR, 0);
}
-#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
-/*
- * IDE stuff.
- */
-static int
-prep_ide_default_irq(unsigned long base)
-{
- switch (base) {
- case 0x1f0: return 13;
- case 0x170: return 13;
- case 0x1e8: return 11;
- case 0x168: return 10;
- case 0xfff0: return 14; /* MCP(N)750 ide0 */
- case 0xffe0: return 15; /* MCP(N)750 ide1 */
- default: return 0;
- }
-}
-
-static unsigned long
-prep_ide_default_io_base(int index)
-{
- switch (index) {
- case 0: return 0x1f0;
- case 1: return 0x170;
- case 2: return 0x1e8;
- case 3: return 0x168;
- default:
- return 0;
- }
-}
-#endif
-
#ifdef CONFIG_SMP
/* PReP (MTX) support */
static int __init
@@ -1070,11 +1037,6 @@ prep_init(unsigned long r3, unsigned lon
ppc_md.setup_io_mappings = prep_map_io;
-#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
- ppc_ide_md.default_irq = prep_ide_default_irq;
- ppc_ide_md.default_io_base = prep_ide_default_io_base;
-#endif
-
#ifdef CONFIG_SMP
smp_ops = &prep_smp_ops;
#endif /* CONFIG_SMP */
Index: b/drivers/ide/ide.c
===================================================================
--- a/drivers/ide/ide.c
+++ b/drivers/ide/ide.c
@@ -207,10 +207,6 @@ static void __init init_ide_data (void)
#ifdef CONFIG_IDE_ARCH_OBSOLETE_INIT
memset(&hw, 0, sizeof(hw));
ide_std_init_ports(&hw, io_addr, ctl_addr);
-# ifdef CONFIG_PPC32
- if (ppc_ide_md.ide_init_hwif)
- ppc_ide_md.ide_init_hwif(&hw, io_addr, 0, &hwif->irq);
-# endif
memcpy(hwif->io_ports, hw.io_ports, sizeof(hw.io_ports));
#endif
hwif->noprobe = !hwif->io_ports[IDE_DATA_OFFSET];
Index: b/include/asm-powerpc/ide.h
===================================================================
--- a/include/asm-powerpc/ide.h
+++ b/include/asm-powerpc/ide.h
@@ -31,30 +31,47 @@
#include <linux/hdreg.h>
#include <linux/ioport.h>
-struct ide_machdep_calls {
- int (*default_irq)(unsigned long base);
- unsigned long (*default_io_base)(int index);
- void (*ide_init_hwif)(hw_regs_t *hw,
- unsigned long data_port,
- unsigned long ctrl_port,
- int *irq);
-};
-
-extern struct ide_machdep_calls ppc_ide_md;
-
#define IDE_ARCH_OBSOLETE_DEFAULTS
+/* FIXME: use ide_platform host driver */
static __inline__ int ide_default_irq(unsigned long base)
{
- if (ppc_ide_md.default_irq)
- return ppc_ide_md.default_irq(base);
+#ifdef CONFIG_PPLUS
+ switch (base) {
+ case 0x1f0: return 14;
+ case 0x170: return 15;
+ }
+#endif
+#ifdef CONFIG_PPC_PREP
+ switch (base) {
+ case 0x1f0: return 13;
+ case 0x170: return 13;
+ case 0x1e8: return 11;
+ case 0x168: return 10;
+ case 0xfff0: return 14; /* MCP(N)750 ide0 */
+ case 0xffe0: return 15; /* MCP(N)750 ide1 */
+ }
+#endif
return 0;
}
+/* FIXME: use ide_platform host driver */
static __inline__ unsigned long ide_default_io_base(int index)
{
- if (ppc_ide_md.default_io_base)
- return ppc_ide_md.default_io_base(index);
+#ifdef CONFIG_PPLUS
+ switch (index) {
+ case 0: return 0x1f0;
+ case 1: return 0x170;
+ }
+#endif
+#ifdef CONFIG_PPC_PREP
+ switch (index) {
+ case 0: return 0x1f0;
+ case 1: return 0x170;
+ case 2: return 0x1e8;
+ case 3: return 0x168;
+ }
+#endif
return 0;
}
next prev parent reply other threads:[~2008-02-14 0:23 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-02-14 0:36 [PATCH 00/11] ide/ppc: remove PPC specific IDE hacks Bartlomiej Zolnierkiewicz
2008-02-14 0:36 ` Bartlomiej Zolnierkiewicz
2008-02-14 0:36 ` [PATCH 01/11] ide-pmac: remove dead code Bartlomiej Zolnierkiewicz
2008-02-14 0:36 ` Bartlomiej Zolnierkiewicz
2008-02-14 0:36 ` [PATCH 02/11] ppc/hdpu: remove dead IDE code Bartlomiej Zolnierkiewicz
2008-02-14 0:36 ` Bartlomiej Zolnierkiewicz
2008-02-14 0:36 ` [PATCH 03/11] ppc/ppc4xx: remove ppc_ide_md hooks Bartlomiej Zolnierkiewicz
2008-02-14 0:36 ` Bartlomiej Zolnierkiewicz
2008-02-14 0:36 ` [PATCH 04/11] ppc/pmac: " Bartlomiej Zolnierkiewicz
2008-02-14 0:36 ` Bartlomiej Zolnierkiewicz
2008-02-14 0:36 ` [PATCH 05/11] ppc/mpc8xx: " Bartlomiej Zolnierkiewicz
2008-02-14 0:36 ` Bartlomiej Zolnierkiewicz
2008-02-14 20:46 ` Vitaly Bordug
2008-02-14 20:46 ` Vitaly Bordug
2008-02-14 20:46 ` Vitaly Bordug
2008-02-14 0:37 ` [PATCH 06/11] ppc/lopec: " Bartlomiej Zolnierkiewicz
2008-02-14 0:37 ` Bartlomiej Zolnierkiewicz
2008-02-14 0:37 ` [PATCH 07/11] ppc/sandpoint: " Bartlomiej Zolnierkiewicz
2008-02-14 0:37 ` Bartlomiej Zolnierkiewicz
2008-02-14 0:37 ` [PATCH 08/11] ppc/pplus: remove ppc_ide_md.ide_init_hwif hook Bartlomiej Zolnierkiewicz
2008-02-14 0:37 ` Bartlomiej Zolnierkiewicz
2008-02-14 0:37 ` Bartlomiej Zolnierkiewicz [this message]
2008-02-14 0:37 ` [PATCH 09/11] ppc: remove ppc_ide_md Bartlomiej Zolnierkiewicz
2008-02-14 0:37 ` [PATCH 10/11] ppc: don't include <linux/ide.h> Bartlomiej Zolnierkiewicz
2008-02-14 0:37 ` Bartlomiej Zolnierkiewicz
2008-02-14 0:37 ` [PATCH 11/11] ppc/pmac: remove no longer needed IDE quirk Bartlomiej Zolnierkiewicz
2008-02-14 0:37 ` Bartlomiej Zolnierkiewicz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080214003729.12879.2159.sendpatchset@localhost.localdomain \
--to=bzolnier@gmail.com \
--cc=benh@kernel.crashing.org \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.