From: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
To: linux-kernel@vger.kernel.org
Cc: linux-ide@vger.kernel.org, linuxppc-dev@ozlabs.org,
sfr@canb.auug.org.au, apw@shadowen.org
Subject: [PATCH] next-20080218 build failure at pmac_ide_macio_attach ()
Date: Mon, 18 Feb 2008 19:31:59 +0530 [thread overview]
Message-ID: <20080218140159.GA31310@linux.vnet.ibm.com> (raw)
Hi,
The next-20080218 kernel build fails on the powerpc(s)
drivers/ide/ppc/pmac.c: In function ‘pmac_ide_macio_attach’:
drivers/ide/ppc/pmac.c:1094: error: conversion to non-scalar type requested
drivers/ide/ppc/pmac.c: In function ‘pmac_ide_pci_attach’:
drivers/ide/ppc/pmac.c:1232: error: conversion to non-scalar type requested
make[3]: *** [drivers/ide/ppc/pmac.o] Error 1
make[2]: *** [drivers/ide/ppc] Error 2
make[1]: *** [drivers/ide] Error 2
make: *** [drivers] Error 2
I Have tested this patch for build failure only.
Signed-off-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
---
--- linux-2.6.25-rc1/drivers/ide/ppc/pmac.c 2008-02-18 18:41:48.000000000 +0530
+++ linux-2.6.25-rc1/drivers/ide/ppc/~pmac.c 2008-02-18 19:20:37.000000000 +0530
@@ -1091,7 +1091,7 @@ pmac_ide_macio_attach(struct macio_dev *
int irq, rc;
hw_regs_t hw;
- pmif = (struct pmac_ide_hwif)kzalloc(sizeof(*pmif), GFP_KERNEL);
+ pmif = (struct pmac_ide_hwif*)kzalloc(sizeof(*pmif), GFP_KERNEL);
if (pmif == NULL)
return -ENOMEM;
@@ -1229,7 +1229,7 @@ pmac_ide_pci_attach(struct pci_dev *pdev
return -ENODEV;
}
- pmif = (struct pmac_ide_hwif)kzalloc(sizeof(*pmif), GFP_KERNEL);
+ pmif = (struct pmac_ide_hwif*)kzalloc(sizeof(*pmif), GFP_KERNEL);
if (pmif == NULL)
return -ENOMEM;
--
Thanks & Regards,
Kamalesh Babulal,
Linux Technology Center,
IBM, ISTL.
WARNING: multiple messages have this Message-ID (diff)
From: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
To: linux-kernel@vger.kernel.org
Cc: linux-ide@vger.kernel.org, sfr@canb.auug.org.au, linuxppc-dev@ozlabs.org
Subject: [PATCH] next-20080218 build failure at pmac_ide_macio_attach ()
Date: Mon, 18 Feb 2008 19:31:59 +0530 [thread overview]
Message-ID: <20080218140159.GA31310@linux.vnet.ibm.com> (raw)
Hi,
The next-20080218 kernel build fails on the powerpc(s)
drivers/ide/ppc/pmac.c: In function ‘pmac_ide_macio_attach’:
drivers/ide/ppc/pmac.c:1094: error: conversion to non-scalar type requested
drivers/ide/ppc/pmac.c: In function ‘pmac_ide_pci_attach’:
drivers/ide/ppc/pmac.c:1232: error: conversion to non-scalar type requested
make[3]: *** [drivers/ide/ppc/pmac.o] Error 1
make[2]: *** [drivers/ide/ppc] Error 2
make[1]: *** [drivers/ide] Error 2
make: *** [drivers] Error 2
I Have tested this patch for build failure only.
Signed-off-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
---
--- linux-2.6.25-rc1/drivers/ide/ppc/pmac.c 2008-02-18 18:41:48.000000000 +0530
+++ linux-2.6.25-rc1/drivers/ide/ppc/~pmac.c 2008-02-18 19:20:37.000000000 +0530
@@ -1091,7 +1091,7 @@ pmac_ide_macio_attach(struct macio_dev *
int irq, rc;
hw_regs_t hw;
- pmif = (struct pmac_ide_hwif)kzalloc(sizeof(*pmif), GFP_KERNEL);
+ pmif = (struct pmac_ide_hwif*)kzalloc(sizeof(*pmif), GFP_KERNEL);
if (pmif == NULL)
return -ENOMEM;
@@ -1229,7 +1229,7 @@ pmac_ide_pci_attach(struct pci_dev *pdev
return -ENODEV;
}
- pmif = (struct pmac_ide_hwif)kzalloc(sizeof(*pmif), GFP_KERNEL);
+ pmif = (struct pmac_ide_hwif*)kzalloc(sizeof(*pmif), GFP_KERNEL);
if (pmif == NULL)
return -ENOMEM;
--
Thanks & Regards,
Kamalesh Babulal,
Linux Technology Center,
IBM, ISTL.
next reply other threads:[~2008-02-18 14:01 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-02-18 14:01 Kamalesh Babulal [this message]
2008-02-18 14:01 ` [PATCH] next-20080218 build failure at pmac_ide_macio_attach () Kamalesh Babulal
2008-02-18 14:17 ` Andreas Schwab
2008-02-18 14:17 ` Andreas Schwab
2008-02-18 17:06 ` [PATCH-RESEND] " Kamalesh Babulal
2008-02-18 17:06 ` Kamalesh Babulal
2008-02-19 0:04 ` [PATCH] " Bartlomiej Zolnierkiewicz
2008-02-19 0:04 ` Bartlomiej Zolnierkiewicz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080218140159.GA31310@linux.vnet.ibm.com \
--to=kamalesh@linux.vnet.ibm.com \
--cc=apw@shadowen.org \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@ozlabs.org \
--cc=sfr@canb.auug.org.au \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.