From: Johannes Berg <johannes@sipsolutions.net>
To: John Linville <linville@tuxdriver.com>
Cc: linux-wireless@vger.kernel.org, Luis Carlos Cobo <luisca@cozybit.com>
Subject: [PATCH 06/18] mac80211: support functions for mesh
Date: Sat, 23 Feb 2008 15:17:09 +0100 [thread overview]
Message-ID: <20080223142010.953902000@sipsolutions.net> (raw)
In-Reply-To: 20080223141703.194775000@sipsolutions.net
From: Luis Carlos Cobo <luisca@cozybit.com>
The two important features coded in mesh.c are:
Recently Multicast Cache: in on-demand HWMP, multicast traffic is retransmitted
by every receiving node. Even though a mesh TTL counter avoids infinite loops,
it is also necessary to avoid traffic explosion by keeping a cache of multicast
mesh frame that have been received recently. With this feature, maximum number
of retransmissions of a multicast frame for the case of N nodes within the range
of each other would be N. Without it, the maximum number of retransmissions
would be in the order of N^(MESH_TTL - 1).
Code to support mesh tables.
Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
---
net/mac80211/mesh.c | 383 ++++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 383 insertions(+)
create mode 100644 net/mac80211/mesh.c
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ everything/net/mac80211/mesh.c 2008-02-23 14:51:39.000000000 +0100
@@ -0,0 +1,383 @@
+/*
+ * Copyright (c) 2008 open80211s Ltd.
+ * Authors: Luis Carlos Cobo <luisca@cozybit.com>
+ * Javier Cardona <javier@cozybit.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "ieee80211_i.h"
+#include "mesh.h"
+
+#define PP_OFFSET 1 /* Path Selection Protocol */
+#define PM_OFFSET 5 /* Path Selection Metric */
+#define CC_OFFSET 9 /* Congestion Control Mode */
+#define CAPAB_OFFSET 17
+#define ACCEPT_PLINKS 0x80
+
+int mesh_allocated;
+static struct kmem_cache *rm_cache;
+
+void ieee80211s_init(void)
+{
+ mesh_pathtbl_init();
+ mesh_allocated = 1;
+ rm_cache = kmem_cache_create("mesh_rmc", sizeof(struct rmc_entry),
+ 0, 0, NULL);
+}
+
+void ieee80211s_stop(void)
+{
+ mesh_pathtbl_unregister();
+ kmem_cache_destroy(rm_cache);
+}
+
+/**
+ * mesh_matches_local - check if the config of a mesh point matches ours
+ *
+ * @ie: information elements of a management frame from the mesh peer
+ * @dev: local mesh interface
+ *
+ * This function checks if the mesh configuration of a mesh point matches the
+ * local mesh configuration, i.e. if both nodes belong to the same mesh network.
+ */
+bool mesh_matches_local(struct ieee802_11_elems *ie, struct net_device *dev)
+{
+ struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+ struct ieee80211_if_sta *sta = &sdata->u.sta;
+
+ if (sta->mesh_id_len == ie->mesh_id_len &&
+ memcmp(sta->mesh_id, ie->mesh_id, ie->mesh_id_len) == 0 &&
+ memcmp(sta->mesh_pp_id, ie->mesh_config + PP_OFFSET, 4) == 0 &&
+ memcmp(sta->mesh_pm_id, ie->mesh_config + PM_OFFSET, 4) == 0 &&
+ memcmp(sta->mesh_cc_id, ie->mesh_config + CC_OFFSET, 4) == 0)
+ /*
+ * As support for each feature is added, check for matching
+ * - On mesh config capabilities
+ * - Power Save Support En
+ * - Sync support enabled
+ * - Sync support active
+ * - Sync support required from peer
+ * - MDA enabled
+ * - Power management control on fc
+ */
+ return true;
+
+ return false;
+}
+
+/**
+ * mesh_peer_accepts_plinks - check if an mp is willing to establish peer links
+ *
+ * @ie: information elements of a management frame from the mesh peer
+ * @dev: local mesh interface
+ */
+bool mesh_peer_accepts_plinks(struct ieee802_11_elems *ie,
+ struct net_device *dev)
+{
+ return (*(ie->mesh_config + CAPAB_OFFSET) & ACCEPT_PLINKS) != 0;
+}
+
+/**
+ * mesh_accept_plinks_update: update accepting_plink in local mesh beacons
+ *
+ * @dev: mesh interface in which mesh beacons are going to be updated
+ */
+void mesh_accept_plinks_update(struct net_device *dev)
+{
+ struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+ bool free_plinks;
+
+ /* In case mesh_plink_free_count > 0 and mesh_plinktbl_capacity == 0,
+ * the mesh interface might be able to establish plinks with peers that
+ * are already on the table but are not on ESTAB state. However, in
+ * general the mesh interface is not accepting peer link requests from
+ * new peers, and that must be reflected in the beacon
+ */
+ free_plinks = mesh_plink_availables(sdata);
+
+ if (free_plinks != sdata->u.sta.accepting_plinks)
+ ieee80211_sta_timer((unsigned long) sdata);
+}
+
+void mesh_ids_set_default(struct ieee80211_if_sta *sta)
+{
+ u8 def_id[4] = {0x00, 0x0F, 0xAC, 0xff};
+
+ memcpy(sta->mesh_pp_id, def_id, 4);
+ memcpy(sta->mesh_pm_id, def_id, 4);
+ memcpy(sta->mesh_cc_id, def_id, 4);
+}
+
+int mesh_rmc_init(struct net_device *dev)
+{
+ struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+ int i;
+
+ sdata->u.sta.rmc = kmalloc(sizeof(struct mesh_rmc), GFP_KERNEL);
+ if (!sdata->u.sta.rmc)
+ return -ENOMEM;
+ sdata->u.sta.rmc->idx_mask = RMC_BUCKETS - 1;
+ for (i = 0; i < RMC_BUCKETS; i++)
+ INIT_LIST_HEAD(&sdata->u.sta.rmc->bucket[i].list);
+ return 0;
+}
+
+void mesh_rmc_free(struct net_device *dev)
+{
+ struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+ struct mesh_rmc *rmc = sdata->u.sta.rmc;
+ struct rmc_entry *p, *n;
+ int i;
+
+ if (!sdata->u.sta.rmc)
+ return;
+
+ for (i = 0; i < RMC_BUCKETS; i++)
+ list_for_each_entry_safe(p, n, &rmc->bucket[i].list, list) {
+ list_del(&p->list);
+ kmem_cache_free(rm_cache, p);
+ }
+
+ kfree(rmc);
+ sdata->u.sta.rmc = NULL;
+}
+
+/**
+ * mesh_rmc_check - Check frame in recent multicast cache and add if absent.
+ *
+ * @sa: source address
+ * @mesh_hdr: mesh_header
+ *
+ * Returns: 0 if the frame is not in the cache, nonzero otherwise.
+ *
+ * Checks using the source address and the mesh sequence number if we have
+ * received this frame lately. If the frame is not in the cache, it is added to
+ * it.
+ */
+int mesh_rmc_check(u8 *sa, struct ieee80211s_hdr *mesh_hdr,
+ struct net_device *dev)
+{
+ struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+ struct mesh_rmc *rmc = sdata->u.sta.rmc;
+ u32 seqnum = 0;
+ int entries = 0;
+ u8 idx;
+ struct rmc_entry *p, *n;
+
+ /* Don't care about endianness since only match matters */
+ memcpy(&seqnum, mesh_hdr->seqnum, sizeof(mesh_hdr->seqnum));
+ idx = mesh_hdr->seqnum[0] & rmc->idx_mask;
+ list_for_each_entry_safe(p, n, &rmc->bucket[idx].list, list) {
+ ++entries;
+ if (time_after(jiffies, p->exp_time) ||
+ (entries == RMC_QUEUE_MAX_LEN)) {
+ list_del(&p->list);
+ kmem_cache_free(rm_cache, p);
+ --entries;
+ } else if ((seqnum == p->seqnum)
+ && (memcmp(sa, p->sa, ETH_ALEN) == 0))
+ return -1;
+ }
+
+ p = kmem_cache_alloc(rm_cache, GFP_ATOMIC);
+ if (!p) {
+ printk(KERN_DEBUG "o11s: could not allocate RMC entry\n");
+ return 0;
+ }
+ p->seqnum = seqnum;
+ p->exp_time = jiffies + RMC_TIMEOUT;
+ memcpy(p->sa, sa, ETH_ALEN);
+ list_add(&p->list, &rmc->bucket[idx].list);
+ return 0;
+}
+
+void mesh_mgmt_ies_add(struct sk_buff *skb, struct net_device *dev)
+{
+ struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+ struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+ struct ieee80211_supported_band *sband;
+ u8 *pos;
+ int len, i, rate;
+
+ sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
+ len = sband->n_bitrates;
+ if (len > 8)
+ len = 8;
+ pos = skb_put(skb, len + 2);
+ *pos++ = WLAN_EID_SUPP_RATES;
+ *pos++ = len;
+ for (i = 0; i < len; i++) {
+ rate = sband->bitrates[i].bitrate;
+ *pos++ = (u8) (rate / 5);
+ }
+
+ if (sband->n_bitrates > len) {
+ pos = skb_put(skb, sband->n_bitrates - len + 2);
+ *pos++ = WLAN_EID_EXT_SUPP_RATES;
+ *pos++ = sband->n_bitrates - len;
+ for (i = len; i < sband->n_bitrates; i++) {
+ rate = sband->bitrates[i].bitrate;
+ *pos++ = (u8) (rate / 5);
+ }
+ }
+
+ pos = skb_put(skb, 2 + sdata->u.sta.mesh_id_len);
+ *pos++ = WLAN_EID_MESH_ID;
+ *pos++ = sdata->u.sta.mesh_id_len;
+ if (sdata->u.sta.mesh_id_len)
+ memcpy(pos, sdata->u.sta.mesh_id, sdata->u.sta.mesh_id_len);
+
+ pos = skb_put(skb, 21);
+ *pos++ = WLAN_EID_MESH_CONFIG;
+ *pos++ = MESH_CFG_LEN;
+ /* Version */
+ *pos++ = 1;
+
+ /* Active path selection protocol ID */
+ memcpy(pos, sdata->u.sta.mesh_pp_id, 4);
+ pos += 4;
+
+ /* Active path selection metric ID */
+ memcpy(pos, sdata->u.sta.mesh_pm_id, 4);
+ pos += 4;
+
+ /* Congestion control mode identifier */
+ memcpy(pos, sdata->u.sta.mesh_cc_id, 4);
+ pos += 4;
+
+ /* Channel precedence:
+ * Not running simple channel unification protocol
+ */
+ memset(pos, 0x00, 4);
+ pos += 4;
+
+ /* Mesh capability */
+ sdata->u.sta.accepting_plinks = mesh_plink_availables(sdata);
+ *pos++ = sdata->u.sta.accepting_plinks ? ACCEPT_PLINKS : 0x00;
+ *pos++ = 0x00;
+
+ return;
+}
+
+u32 mesh_table_hash(u8 *addr, struct net_device *dev, struct mesh_table *tbl)
+{
+ /* Use last four bytes of hw addr and interface index as hash index */
+ return jhash_2words(*(u32 *)(addr+2), dev->ifindex, tbl->hash_rnd)
+ & tbl->hash_mask;
+}
+
+u8 mesh_id_hash(u8 *mesh_id, int mesh_id_len)
+{
+ if (!mesh_id_len)
+ return 1;
+ else if (mesh_id_len == 1)
+ return (u8) mesh_id[0];
+ else
+ return (u8) (mesh_id[0] + 2 * mesh_id[1]);
+}
+
+struct mesh_table *mesh_table_alloc(int size_order)
+{
+ int i;
+ struct mesh_table *newtbl;
+
+ newtbl = kmalloc(sizeof(struct mesh_table), GFP_KERNEL);
+ if (!newtbl)
+ return NULL;
+
+ newtbl->hash_buckets = kzalloc(sizeof(struct hlist_head) *
+ (1 << size_order), GFP_KERNEL);
+
+ if (!newtbl->hash_buckets) {
+ kfree(newtbl);
+ return NULL;
+ }
+
+ newtbl->hashwlock = kmalloc(sizeof(spinlock_t) *
+ (1 << size_order), GFP_KERNEL);
+ if (!newtbl->hashwlock) {
+ kfree(newtbl->hash_buckets);
+ kfree(newtbl);
+ return NULL;
+ }
+
+ newtbl->size_order = size_order;
+ newtbl->hash_mask = (1 << size_order) - 1;
+ atomic_set(&newtbl->entries, 0);
+ get_random_bytes(&newtbl->hash_rnd,
+ sizeof(newtbl->hash_rnd));
+ for (i = 0; i <= newtbl->hash_mask; i++)
+ spin_lock_init(&newtbl->hashwlock[i]);
+
+ return newtbl;
+}
+
+void mesh_table_free(struct mesh_table *tbl, bool free_leafs)
+{
+ struct hlist_head *mesh_hash;
+ struct hlist_node *p, *q;
+ int i;
+
+ mesh_hash = tbl->hash_buckets;
+ for (i = 0; i <= tbl->hash_mask; i++) {
+ spin_lock(&tbl->hashwlock[i]);
+ hlist_for_each_safe(p, q, &mesh_hash[i]) {
+ tbl->free_node(p, free_leafs);
+ atomic_dec(&tbl->entries);
+ }
+ spin_unlock(&tbl->hashwlock[i]);
+ }
+ kfree(tbl->hash_buckets);
+ kfree(tbl->hashwlock);
+ kfree(tbl);
+}
+
+static void ieee80211_mesh_path_timer(unsigned long data)
+{
+ struct ieee80211_sub_if_data *sdata =
+ (struct ieee80211_sub_if_data *) data;
+ struct ieee80211_if_sta *ifsta = &sdata->u.sta;
+ struct ieee80211_local *local = wdev_priv(&sdata->wdev);
+
+ queue_work(local->hw.workqueue, &ifsta->work);
+}
+
+struct mesh_table *mesh_table_grow(struct mesh_table *tbl)
+{
+ struct mesh_table *newtbl;
+ struct hlist_head *oldhash;
+ struct hlist_node *p;
+ int err = 0;
+ int i;
+
+ if (atomic_read(&tbl->entries)
+ < tbl->mean_chain_len * (tbl->hash_mask + 1)) {
+ err = -EPERM;
+ goto endgrow;
+ }
+
+ newtbl = mesh_table_alloc(tbl->size_order + 1);
+ if (!newtbl) {
+ err = -ENOMEM;
+ goto endgrow;
+ }
+
+ newtbl->free_node = tbl->free_node;
+ newtbl->mean_chain_len = tbl->mean_chain_len;
+ newtbl->copy_node = tbl->copy_node;
+ atomic_set(&newtbl->entries, atomic_read(&tbl->entries));
+
+ oldhash = tbl->hash_buckets;
+ for (i = 0; i <= tbl->hash_mask; i++)
+ hlist_for_each(p, &oldhash[i])
+ tbl->copy_node(p, newtbl);
+
+endgrow:
+ if (err)
+ return NULL;
+ else
+ return newtbl;
+}
--
next prev parent reply other threads:[~2008-02-23 14:21 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-02-23 14:17 [PATCH 00/18] mac80211 802.11s networking code Johannes Berg
2008-02-23 14:17 ` [PATCH 01/18] wireless: various definitions for mesh networking Johannes Berg
2008-02-23 14:17 ` [PATCH 02/18] WEXT: add mesh interface type Johannes Berg
2008-02-23 14:17 ` [PATCH 03/18] nl80211/cfg80211: support for mesh, sta dumping Johannes Berg
2008-02-23 14:17 ` [PATCH 04/18] mac80211: add mesh interface type Johannes Berg
2008-02-23 14:17 ` [PATCH 05/18] mac80211: mesh function and data structures definitions Johannes Berg
2008-02-23 14:17 ` Johannes Berg [this message]
2008-02-23 14:17 ` [PATCH 07/18] mac80211: support for mesh interfaces in mac80211 data path Johannes Berg
2008-02-23 14:17 ` [PATCH 08/18] mac80211: mesh data structures and first mesh changes Johannes Berg
2008-02-23 14:17 ` [PATCH 09/18] mac80211: mesh changes to the MLME Johannes Berg
2008-02-23 14:17 ` [PATCH 10/18] mac80211: mesh peer link implementation Johannes Berg
2008-02-23 14:17 ` [PATCH 11/18] mac80211: mesh path table implementation Johannes Berg
2008-02-23 14:17 ` [PATCH 12/18] mac80211: code for on-demand Hybrid Wireless Mesh Protocol Johannes Berg
2008-02-23 14:17 ` [PATCH 13/18] mac80211: mesh statistics and config through debugfs Johannes Berg
2008-03-28 6:16 ` Andrew Morton
2008-03-31 21:55 ` Luis Carlos Cobo
2008-03-28 6:38 ` Andrew Morton
2008-03-31 21:48 ` Luis Carlos Cobo
2008-02-23 14:17 ` [PATCH 14/18] mac80211: mesh path and mesh peer configuration Johannes Berg
2008-02-23 14:17 ` [PATCH 15/18] mac80211: complete the mesh (interface handling) code Johannes Berg
2008-02-23 14:17 ` [PATCH 16/18] mac80211: clean up mesh code Johannes Berg
2008-02-23 14:17 ` [PATCH 17/18] mac80211: mesh hwmp locking fixes Johannes Berg
2008-02-25 19:09 ` Luis Carlos Cobo
2008-02-25 19:09 ` Johannes Berg
2008-02-25 19:41 ` Luis Carlos Cobo
2008-02-23 14:17 ` [PATCH 18/18] mac80211: enable mesh in Kconfig Johannes Berg
2008-02-25 20:58 ` Luis Carlos Cobo
2008-02-25 21:24 ` Johannes Berg
2008-02-25 23:27 ` Luis Carlos Cobo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080223142010.953902000@sipsolutions.net \
--to=johannes@sipsolutions.net \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=luisca@cozybit.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.