All of lore.kernel.org
 help / color / mirror / Atom feed
From: gorcunov@gmail.com
To: rth@twiddle.net, chris@zankel.net, jdike@addtoit.com,
	linuxppc-dev@ozlabs.org, paulus@samba.org, dhowells@redhat.com,
	zippel@linux-m68k.org, geert@linux-m68k.org,
	linux-m68k@lists.linux-m68k.org, takata@linux-m32r.org,
	linux-m32r@ml.linux-m32r.org, linux-kernel@vger.kernel.org
Cc: gorcunov@gmail.com, sam@ravnborg.org
Subject: [RFC 05/10] mn10300: vmlinux.lds.S cleanup - use PAGE_SIZE, PERCPU macroses
Date: Wed, 27 Feb 2008 23:58:36 +0300	[thread overview]
Message-ID: <20080227210003.484325295@gmail.com> (raw)
In-Reply-To: 20080227205831.150784453@gmail.com

This patch includes page.h header into liker script that
allow us to use PAGE_SIZE macro instead of numeric constant

Also PERCPU macro is used instead of explicit section definition

Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
---

WARNING: COMPLETELY UNTESTED !!!

 vmlinux.lds.S |   22 ++++++++++------------
 1 file changed, 10 insertions(+), 12 deletions(-)

Index: linux-2.6.git/arch/mn10300/kernel/vmlinux.lds.S
===================================================================
--- linux-2.6.git.orig/arch/mn10300/kernel/vmlinux.lds.S	2008-02-21 22:26:02.000000000 +0300
+++ linux-2.6.git/arch/mn10300/kernel/vmlinux.lds.S	2008-02-27 21:30:34.000000000 +0300
@@ -11,6 +11,7 @@
 #define __VMLINUX_LDS__
 #include <asm-generic/vmlinux.lds.h>
 #include <asm/thread_info.h>
+#include <asm/page.h>
 
 OUTPUT_FORMAT("elf32-am33lin", "elf32-am33lin", "elf32-am33lin")
 OUTPUT_ARCH(mn10300)
@@ -55,13 +56,13 @@ SECTIONS
 	CONSTRUCTORS
 	}
 
-  . = ALIGN(4096);
+  . = ALIGN(PAGE_SIZE);
   __nosave_begin = .;
   .data_nosave : { *(.data.nosave) }
-  . = ALIGN(4096);
+  . = ALIGN(PAGE_SIZE);
   __nosave_end = .;
 
-  . = ALIGN(4096);
+  . = ALIGN(PAGE_SIZE);
   .data.page_aligned : { *(.data.idt) }
 
   . = ALIGN(32);
@@ -78,7 +79,7 @@ SECTIONS
   .data.init_task : { *(.data.init_task) }
 
   /* might get freed after init */
-  . = ALIGN(4096);
+  . = ALIGN(PAGE_SIZE);
   .smp_locks : AT(ADDR(.smp_locks) - LOAD_OFFSET) {
   	__smp_locks = .;
 	*(.smp_locks)
@@ -86,7 +87,7 @@ SECTIONS
   }
 
   /* will be freed after init */
-  . = ALIGN(4096);		/* Init code and data */
+  . = ALIGN(PAGE_SIZE);		/* Init code and data */
   __init_begin = .;
   .init.text : {
 	_sinittext = .;
@@ -120,17 +121,14 @@ SECTIONS
   .exit.data : { *(.exit.data) }
 
 #ifdef CONFIG_BLK_DEV_INITRD
-  . = ALIGN(4096);
+  . = ALIGN(PAGE_SIZE);
   __initramfs_start = .;
   .init.ramfs : { *(.init.ramfs) }
   __initramfs_end = .;
 #endif
 
-  . = ALIGN(32);
-  __per_cpu_start = .;
-  .data.percpu  : { *(.data.percpu) }
-  __per_cpu_end = .;
-  . = ALIGN(4096);
+  PERCPU(32)
+  . = ALIGN(PAGE_SIZE);
   __init_end = .;
   /* freed after init ends here */
 
@@ -145,7 +143,7 @@ SECTIONS
   _end = . ;
 
   /* This is where the kernel creates the early boot page tables */
-  . = ALIGN(4096);
+  . = ALIGN(PAGE_SIZE);
   pg0 = .;
 
   /* Sections to be discarded */

-- 

WARNING: multiple messages have this Message-ID (diff)
From: gorcunov@gmail.com
To: rth@twiddle.net, chris@zankel.net, jdike@addtoit.com,
	linuxppc-dev@ozlabs.org, paulus@samba.org, dhowells@redhat.com,
	zippel@linux-m68k.org, geert@linux-m68k.org,
	linux-m68k@vger.kernel.org, takata@linux-m32r.org,
	linux-m32r@ml.linux-m32r.org, linux-kernel@vger.kernel.org
Cc: gorcunov@gmail.com, sam@ravnborg.org
Subject: [RFC 05/10] mn10300: vmlinux.lds.S cleanup - use PAGE_SIZE, PERCPU macroses
Date: Wed, 27 Feb 2008 23:58:36 +0300	[thread overview]
Message-ID: <20080227210003.484325295@gmail.com> (raw)
In-Reply-To: 20080227205831.150784453@gmail.com

[-- Attachment #1: mn10300-vmlinux --]
[-- Type: text/plain, Size: 2365 bytes --]

This patch includes page.h header into liker script that
allow us to use PAGE_SIZE macro instead of numeric constant

Also PERCPU macro is used instead of explicit section definition

Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
---

WARNING: COMPLETELY UNTESTED !!!

 vmlinux.lds.S |   22 ++++++++++------------
 1 file changed, 10 insertions(+), 12 deletions(-)

Index: linux-2.6.git/arch/mn10300/kernel/vmlinux.lds.S
===================================================================
--- linux-2.6.git.orig/arch/mn10300/kernel/vmlinux.lds.S	2008-02-21 22:26:02.000000000 +0300
+++ linux-2.6.git/arch/mn10300/kernel/vmlinux.lds.S	2008-02-27 21:30:34.000000000 +0300
@@ -11,6 +11,7 @@
 #define __VMLINUX_LDS__
 #include <asm-generic/vmlinux.lds.h>
 #include <asm/thread_info.h>
+#include <asm/page.h>
 
 OUTPUT_FORMAT("elf32-am33lin", "elf32-am33lin", "elf32-am33lin")
 OUTPUT_ARCH(mn10300)
@@ -55,13 +56,13 @@ SECTIONS
 	CONSTRUCTORS
 	}
 
-  . = ALIGN(4096);
+  . = ALIGN(PAGE_SIZE);
   __nosave_begin = .;
   .data_nosave : { *(.data.nosave) }
-  . = ALIGN(4096);
+  . = ALIGN(PAGE_SIZE);
   __nosave_end = .;
 
-  . = ALIGN(4096);
+  . = ALIGN(PAGE_SIZE);
   .data.page_aligned : { *(.data.idt) }
 
   . = ALIGN(32);
@@ -78,7 +79,7 @@ SECTIONS
   .data.init_task : { *(.data.init_task) }
 
   /* might get freed after init */
-  . = ALIGN(4096);
+  . = ALIGN(PAGE_SIZE);
   .smp_locks : AT(ADDR(.smp_locks) - LOAD_OFFSET) {
   	__smp_locks = .;
 	*(.smp_locks)
@@ -86,7 +87,7 @@ SECTIONS
   }
 
   /* will be freed after init */
-  . = ALIGN(4096);		/* Init code and data */
+  . = ALIGN(PAGE_SIZE);		/* Init code and data */
   __init_begin = .;
   .init.text : {
 	_sinittext = .;
@@ -120,17 +121,14 @@ SECTIONS
   .exit.data : { *(.exit.data) }
 
 #ifdef CONFIG_BLK_DEV_INITRD
-  . = ALIGN(4096);
+  . = ALIGN(PAGE_SIZE);
   __initramfs_start = .;
   .init.ramfs : { *(.init.ramfs) }
   __initramfs_end = .;
 #endif
 
-  . = ALIGN(32);
-  __per_cpu_start = .;
-  .data.percpu  : { *(.data.percpu) }
-  __per_cpu_end = .;
-  . = ALIGN(4096);
+  PERCPU(32)
+  . = ALIGN(PAGE_SIZE);
   __init_end = .;
   /* freed after init ends here */
 
@@ -145,7 +143,7 @@ SECTIONS
   _end = . ;
 
   /* This is where the kernel creates the early boot page tables */
-  . = ALIGN(4096);
+  . = ALIGN(PAGE_SIZE);
   pg0 = .;
 
   /* Sections to be discarded */

-- 

  parent reply	other threads:[~2008-02-27 21:00 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-02-27 20:58 [RFC 00/10] vmlinux.lds cleanup gorcunov
2008-02-27 20:58 ` gorcunov
2008-02-27 20:58 ` [RFC 01/10] arm: vmlinux.lds.S cleanup - use PERCPU, PAGE_SIZE macroses gorcunov
2008-02-27 20:58   ` gorcunov
2008-02-27 20:58 ` [RFC 02/10] m32r: vmlinux.lds.S cleanup - use PAGE_SIZE, THREAD_SIZE macroses gorcunov
2008-02-27 20:58   ` gorcunov
2008-02-27 20:58 ` [RFC 03/10] m68k: vmlinux-std/sun3.lds.S cleanup - use PAGE_SIZE macro gorcunov
2008-02-27 20:58   ` gorcunov
2008-02-28  8:56   ` Geert Uytterhoeven
2008-02-27 20:58 ` [RFC 04/10] m68knommu: vmlinux.lds " gorcunov
2008-02-27 20:58   ` gorcunov
2008-02-27 20:58 ` gorcunov [this message]
2008-02-27 20:58   ` [RFC 05/10] mn10300: vmlinux.lds.S cleanup - use PAGE_SIZE, PERCPU macroses gorcunov
2008-02-28 12:50   ` David Howells
2008-02-28 12:50     ` David Howells
2008-02-27 20:58 ` [RFC 06/10] powerpc: vmlinux.lds.S cleanup - use PERCPU, THREAD_SIZE macroses gorcunov
2008-02-27 20:58   ` gorcunov
2008-02-27 20:58 ` [RFC 07/10] ppc: vmlinux.lds.S cleanup - use PAGE_SIZE macro gorcunov
2008-02-27 20:58   ` gorcunov
2008-02-27 20:58 ` [RFC 08/10] um: dyn/uml.lds.S " gorcunov
2008-02-27 20:58   ` gorcunov
2008-02-29 15:43   ` Jeff Dike
2008-02-29 15:43     ` Jeff Dike
2008-03-01 15:35     ` Cyrill Gorcunov
2008-03-01 15:35       ` Cyrill Gorcunov
2008-02-27 20:58 ` [RFC 09/10] alpha: vmlinux.lds cleanup - use THREAD_SIZE macro gorcunov
2008-02-27 20:58   ` gorcunov
2008-02-27 20:58 ` [RFC 10/10] xtensa: vmlinux.lds.S - use PAGE_SIZE, THREAD_SIZE macroses gorcunov
2008-02-27 20:58   ` gorcunov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20080227210003.484325295@gmail.com \
    --to=gorcunov@gmail.com \
    --cc=chris@zankel.net \
    --cc=dhowells@redhat.com \
    --cc=geert@linux-m68k.org \
    --cc=jdike@addtoit.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-m32r@ml.linux-m32r.org \
    --cc=linux-m68k@lists.linux-m68k.org \
    --cc=linuxppc-dev@ozlabs.org \
    --cc=paulus@samba.org \
    --cc=rth@twiddle.net \
    --cc=sam@ravnborg.org \
    --cc=takata@linux-m32r.org \
    --cc=zippel@linux-m68k.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.