From: Olaf Hering <olaf@aepfle.de>
To: Alexey Dobriyan <adobriyan@gmail.com>
Cc: linuxppc-dev@ozlabs.org, linux-kernel@vger.kernel.org
Subject: Re: pci_proc_init: proc_dir_entry '00' already registered
Date: Thu, 28 Feb 2008 20:30:53 +0100 [thread overview]
Message-ID: <20080228193053.GA9537@aepfle.de> (raw)
In-Reply-To: <20080210180003.GC1754@martell.zuzino.mipt.ru>
On Sun, Feb 10, Alexey Dobriyan wrote:
> On Sun, Feb 10, 2008 at 11:07:57AM +0100, Olaf Hering wrote:
> > Current Linus tree gives this new warning during bootup:
> >
> > +proc_dir_entry '00' already registered
> > +Call Trace:
> > +[c00000007b0dfba0] [c00000000000e4b0] .show_stack+0x70/0x1bc (unreliable)
> > +[c00000007b0dfc50] [c0000000000f2714] .proc_register+0x130/0x210
> > +[c00000007b0dfd00] [c0000000000f299c] .proc_mkdir_mode+0x40/0x70
> > +[c00000007b0dfd80] [c000000000276ed8] .pci_proc_attach_device+0xac/0x144
> > +[c00000007b0dfe20] [c0000000005bdb3c] .pci_proc_init+0x74/0xac
> > +[c00000007b0dfea0] [c0000000005a27ac] .kernel_init+0x1d0/0x394
> > +[c00000007b0dff90] [c00000000001e258] .kernel_thread+0x4c/0x68
>
> Can you insert dump_stack() when '00' is registered, not just second
> time?
Its pci_bus_add_device(). Full dmesg attached:
diff --git a/drivers/pci/bus.c b/drivers/pci/bus.c
index ef5a6a2..3c6fcd9 100644
--- a/drivers/pci/bus.c
+++ b/drivers/pci/bus.c
@@ -16,6 +16,8 @@ #include <linux/proc_fs.h>
#include <linux/init.h>
#include "pci.h"
+#define olh(fmt,args ...) \
+ printk(KERN_DEBUG "%s(%u) %s(%u):c%u,j%lu " fmt "\n",__FUNCTION__,__LINE__,current->comm,current->pid,smp_processor_id(),jiffies,##args)
/**
* pci_bus_alloc_resource - allocate a resource from a parent bus
@@ -80,6 +82,7 @@ pci_bus_alloc_resource(struct pci_bus *b
int pci_bus_add_device(struct pci_dev *dev)
{
int retval;
+ olh("%s",dev->dev.bus_id);
retval = device_add(&dev->dev);
if (retval)
return retval;
diff --git a/drivers/pci/proc.c b/drivers/pci/proc.c
index ef18fcd..1a9ef7c 100644
--- a/drivers/pci/proc.c
+++ b/drivers/pci/proc.c
@@ -6,6 +6,8 @@
* Copyright (c) 1997--1999 Martin Mares <mj@ucw.cz>
*/
+#define olh(fmt,args ...) \
+ printk(KERN_DEBUG "%s(%u) %s(%u):c%u,j%lu " fmt "\n",__FUNCTION__,__LINE__,current->comm,current->pid,smp_processor_id(),jiffies,##args)
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/module.h>
@@ -390,6 +392,7 @@ int pci_proc_attach_device(struct pci_de
struct proc_dir_entry *e;
char name[16];
+ olh("%d: %p - %s",proc_initialized,dev,dev->dev.bus_id);
if (!proc_initialized)
return -EACCES;
@@ -478,6 +481,7 @@ static int __init pci_proc_init(void)
entry->proc_fops = &proc_bus_pci_dev_operations;
proc_initialized = 1;
while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
+ olh("%s",dev->dev.bus_id);
pci_proc_attach_device(dev);
}
return 0;
DART table allocated at: c00000007f000000
Using PowerMac machine description
Page orders: linear mapping = 24, virtual = 12, io = 12
Found initrd at 0xc000000001300000:0xc000000001559c00
Found U4 memory controller & host bridge @ 0xf8000000 revision: 0x42
Mapped at 0xd000080080000000
Found a Shasta mac-io controller, rev: 0, mapped at 0xd000080080041000
PowerMac motherboard: PowerMac G5 Dual Core
DART IOMMU initialized for U4 type chipset
console [udbg0] enabled
CPU maps initialized for 1 thread per core
(thread shift is 0)
Starting Linux PPC64 #231 SMP Thu Feb 28 19:53:21 CET 2008
-----------------------------------------------------
ppc64_pft_size = 0x0
physicalMemorySize = 0x80000000
htab_address = 0xc00000007c000000
htab_hash_mask = 0x3ffff
-----------------------------------------------------
Linux version 2.6.25-rc3-g5-dirty (olaf@g5) (gcc version 4.1.0 (SUSE Linux)) #231 SMP Thu Feb 28 19:53:21 CET 2008
[boot]0012 Setup Arch
Entering add_active_range(0, 0, 524288) 0 entries of 256 used
Found U4-PCIE PCI host bridge. Firmware bus number: 0->255
PCI host bridge /pci@0,f0000000 ranges:
MEM 0x00000000f1000000..0x00000000f1ffffff -> 0x00000000f1000000
IO 0x00000000f0000000..0x00000000f07fffff -> 0x0000000000000000
MEM 0x0000000090000000..0x00000000afffffff -> 0x0000000090000000
Can't get bus-range for /ht@0,f2000000, assume bus 0
Found U3-HT PCI host bridge. Firmware bus number: 0->239
PCI host bridge /ht@0,f2000000 (primary) ranges:
SMU: Driver 0.7 (c) 2005 Benjamin Herrenschmidt, IBM Corp.
nvram: Checking bank 0...
nvram: gen0=210, gen1=211
nvram: Active bank is: 1
nvram: OF partition at 0x410
nvram: XP partition at 0x1020
nvram: NR partition at 0x1120
Top of RAM: 0x80000000, Total RAM: 0x80000000
Memory hole size: 0MB
Zone PFN ranges:
DMA 0 -> 524288
Normal 524288 -> 524288
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 524288
On node 0 totalpages: 524288
DMA zone: 7168 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 517120 pages, LIFO batch:31
Normal zone: 0 pages used for memmap
Movable zone: 0 pages used for memmap
[boot]0015 Setup Done
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517120
Kernel command line: root=UUID=a77c3a2a-dd4a-4cf6-8c74-287c49897b10 sysrq=1 quiet video=nvidiafb:1024x768@85,bpp:16 panic=12
mpic: Setting up MPIC " MPIC 1 " version 1.2 at f8040000, max 4 CPUs
mpic: ISU size: 124, shift: 7, mask: 7f
mpic: Initializing for 124 sources
mpic: Setting up HT PICs workarounds for U3/U4
mpic: - HT:07.0 [0x90] vendor 106b device 0053 has 86 irqs
PID hash table entries: 4096 (order: 12, 32768 bytes)
time_init: decrementer frequency = 33.333333 MHz
time_init: processor frequency = 2300.000000 MHz
clocksource: timebase mult[7800001] shift[22] registered
clockevent: decrementer mult[888] shift[16] cpu[0]
Console: colour dummy device 80x25
console handover: boot [udbg0] -> real [tty0]
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Memory: 2004604k/2097152k available (6632k kernel code, 91864k reserved, 940k data, 489k bss, 248k init)
Calibrating delay loop... 66.56 BogoMIPS (lpj=332800)
Mount-cache hash table entries: 256
device-tree: Duplicate name in /ht@0,f2000000/pci@8/mac-io@7/i2c@18000, renamed to "i2c-bus@0#1"
PowerMac SMP probe found 2 cpus
KeyWest i2c @0xf8001003 irq 16 /u4@0,f8000000/i2c@f8001000
channel 1 bus /u4@0,f8000000/i2c@f8001000/i2c-bus@1
KeyWest i2c @0x80018000 irq 27 /ht@0,f2000000/pci@8/mac-io@7/i2c@18000
channel 0 bus /ht@0,f2000000/pci@8/mac-io@7/i2c@18000/i2c-bus@0
channel 0 bus /ht@0,f2000000/pci@8/mac-io@7/i2c@18000/i2c-bus@0
SMU i2c /smu@0,0/smu-i2c-control@0
channel b bus /smu@0,0/smu-i2c-control@0/i2c-bus@b
channel e bus /smu@0,0/smu-i2c-control@0/i2c-bus@e
Processor timebase sync using platform function
mpic: requesting IPIs ...
Processor 1 found.
clockevent: decrementer mult[888] shift[16] cpu[1]
Brought up 2 CPUs
net_namespace: 304 bytes
NET: Registered protocol family 16
PCI: Probing PCI hardware
IOMMU table initialized, virtual merging enabled
PCI: Closing bogus Apple Firmware region 2 on bus 0x0a
pci_bus_add_device(85) swapper(1):c0,j4294937324 0000:00:0b.0
pci_proc_attach_device(395) swapper(1):c0,j4294937324 0: c00000007b113800 - 0000:00:0b.0
pci_bus_add_device(85) swapper(1):c0,j4294937324 0000:0a:00.0
pci_proc_attach_device(395) swapper(1):c0,j4294937324 0: c00000007b113000 - 0000:0a:00.0
PCI: Closing bogus Apple Firmware region 2 on bus 0x02
PCI: Closing bogus Apple Firmware region 2 on bus 0x01
PCI: Closing bogus Apple Firmware region 2 on bus 0x03
pci_bus_add_device(85) swapper(1):c0,j4294937324 0001:00:00.0
pci_proc_attach_device(395) swapper(1):c0,j4294937324 0: c00000007b149800 - 0001:00:00.0
pci_bus_add_device(85) swapper(1):c0,j4294937324 0001:00:01.0
pci_proc_attach_device(395) swapper(1):c0,j4294937324 0: c00000007b149000 - 0001:00:01.0
pci_bus_add_device(85) swapper(1):c0,j4294937324 0001:00:02.0
pci_proc_attach_device(395) swapper(1):c0,j4294937324 0: c00000007b1a4800 - 0001:00:02.0
pci_bus_add_device(85) swapper(1):c0,j4294937324 0001:00:03.0
pci_proc_attach_device(395) swapper(1):c0,j4294937324 0: c00000007b1a4000 - 0001:00:03.0
pci_bus_add_device(85) swapper(1):c0,j4294937324 0001:00:04.0
pci_proc_attach_device(395) swapper(1):c0,j4294937324 0: c00000007b1a5800 - 0001:00:04.0
pci_bus_add_device(85) swapper(1):c0,j4294937324 0001:00:05.0
pci_proc_attach_device(395) swapper(1):c0,j4294937324 0: c00000007b1a5000 - 0001:00:05.0
pci_bus_add_device(85) swapper(1):c0,j4294937324 0001:00:06.0
pci_proc_attach_device(395) swapper(1):c0,j4294937324 0: c00000007b1a6800 - 0001:00:06.0
pci_bus_add_device(85) swapper(1):c0,j4294937324 0001:00:07.0
pci_proc_attach_device(395) swapper(1):c0,j4294937324 0: c00000007b1a6000 - 0001:00:07.0
pci_bus_add_device(85) swapper(1):c0,j4294937324 0001:00:08.0
pci_proc_attach_device(395) swapper(1):c0,j4294937324 0: c00000007b1a7800 - 0001:00:08.0
pci_bus_add_device(85) swapper(1):c0,j4294937324 0001:00:09.0
pci_proc_attach_device(395) swapper(1):c0,j4294937324 0: c00000007b1a7000 - 0001:00:09.0
pci_bus_add_device(85) swapper(1):c0,j4294937324 0001:05:04.0
pci_proc_attach_device(395) swapper(1):c0,j4294937324 0: c00000007b1a9800 - 0001:05:04.0
pci_bus_add_device(85) swapper(1):c0,j4294937324 0001:05:04.1
pci_proc_attach_device(395) swapper(1):c0,j4294937324 0: c00000007b1a9000 - 0001:05:04.1
pci_bus_add_device(85) swapper(1):c0,j4294937324 0001:01:07.0
pci_proc_attach_device(395) swapper(1):c0,j4294937324 0: c00000007b1ab800 - 0001:01:07.0
pci_bus_add_device(85) swapper(1):c0,j4294937324 0001:01:0b.0
pci_proc_attach_device(395) swapper(1):c0,j4294937324 0: c00000007b1ab000 - 0001:01:0b.0
pci_bus_add_device(85) swapper(1):c0,j4294937324 0001:01:0b.1
pci_proc_attach_device(395) swapper(1):c0,j4294937324 0: c00000007b1ac800 - 0001:01:0b.1
pci_bus_add_device(85) swapper(1):c0,j4294937324 0001:01:0b.2
pci_proc_attach_device(395) swapper(1):c0,j4294937324 0: c00000007b1ac000 - 0001:01:0b.2
pci_bus_add_device(85) swapper(1):c0,j4294937324 0001:03:0c.0
pci_proc_attach_device(395) swapper(1):c0,j4294937324 0: c00000007b1ae800 - 0001:03:0c.0
pci_bus_add_device(85) swapper(1):c0,j4294937324 0001:03:0d.0
pci_proc_attach_device(395) swapper(1):c0,j4294937324 0: c00000007b1ae000 - 0001:03:0d.0
pci_bus_add_device(85) swapper(1):c0,j4294937324 0001:03:0e.0
pci_proc_attach_device(395) swapper(1):c0,j4294937324 0: c00000007b1af800 - 0001:03:0e.0
PCI: Cannot allocate resource region 0 of device 0000:0a:00.0, will remap
PCI: Cannot allocate resource region 1 of device 0000:0a:00.0, will remap
PCI: Cannot allocate resource region 3 of device 0000:0a:00.0, will remap
PCI: Bridge: 0000:00:0b.0
IO window: 0000-ffff
MEM window: 0xa8000000-0xa9ffffff
PREFETCH window: 0x0000000090000000-0x00000000a7ffffff
PCI: Bridge: 0001:00:01.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0001:00:02.0
IO window: disabled.
MEM window: 0xfa500000-0xfa5fffff
PREFETCH window: disabled.
PCI: Bridge: 0001:00:03.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0001:00:04.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0001:00:05.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0001:00:06.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0001:00:07.0
IO window: disabled.
MEM window: 0xfa000000-0xfa3fffff
PREFETCH window: disabled.
PCI: Bridge: 0001:00:08.0
IO window: disabled.
MEM window: 0x80000000-0x800fffff
PREFETCH window: disabled.
PCI: Bridge: 0001:00:09.0
IO window: disabled.
MEM window: 0xfa400000-0xfa4fffff
PREFETCH window: disabled.
PCI: Probing PCI hardware done
Registering pmac pic with sysfs...
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
NET: Registered protocol family 2
Time: timebase clocksource has been installed.
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 1
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
Unpacking initramfs... done
Freeing initrd memory: 2407k freed
nvram_init: Could not find nvram partition for nvram buffered error logging.
Registering G5 CPU frequency driver
Frequency method: SCOM, Voltage method: GPIO
Low: 1150 Mhz, High: 2300 Mhz, Cur: 2300 MHz
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
SGI XFS with large block/inode numbers, no debug enabled
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_proc_init(484) swapper(1):c0,j4294937353 0000:00:0b.0
pci_proc_attach_device(395) swapper(1):c0,j4294937353 1: c00000007b113800 - 0000:00:0b.0
pci_proc_init(484) swapper(1):c0,j4294937353 0000:0a:00.0
pci_proc_attach_device(395) swapper(1):c0,j4294937353 1: c00000007b113000 - 0000:0a:00.0
pci_proc_init(484) swapper(1):c0,j4294937353 0001:00:00.0
pci_proc_attach_device(395) swapper(1):c0,j4294937353 1: c00000007b149800 - 0001:00:00.0
proc_dir_entry '00' already registered
Call Trace:
[c00000007b0dfb60] [c00000000000f4ec] .show_stack+0x5c/0x1f0 (unreliable)
[c00000007b0dfc10] [c000000000112e40] .proc_register+0x190/0x250
[c00000007b0dfcd0] [c000000000113130] .proc_mkdir_mode+0x40/0x80
[c00000007b0dfd50] [c0000000002c7548] .pci_proc_attach_device+0x158/0x190
[c00000007b0dfe00] [c00000000065c3f8] .pci_proc_init+0xb8/0x100
[c00000007b0dfe90] [c00000000063c8a8] .kernel_init+0x1d8/0x420
[c00000007b0dff90] [c000000000021dac] .kernel_thread+0x4c/0x68
pci_proc_init(484) swapper(1):c0,j4294937353 0001:00:01.0
pci_proc_attach_device(395) swapper(1):c0,j4294937353 1: c00000007b149000 - 0001:00:01.0
pci_proc_init(484) swapper(1):c0,j4294937353 0001:00:02.0
pci_proc_attach_device(395) swapper(1):c0,j4294937353 1: c00000007b1a4800 - 0001:00:02.0
pci_proc_init(484) swapper(1):c0,j4294937353 0001:00:03.0
pci_proc_attach_device(395) swapper(1):c0,j4294937353 1: c00000007b1a4000 - 0001:00:03.0
pci_proc_init(484) swapper(1):c0,j4294937353 0001:00:04.0
pci_proc_attach_device(395) swapper(1):c0,j4294937353 1: c00000007b1a5800 - 0001:00:04.0
pci_proc_init(484) swapper(1):c0,j4294937353 0001:00:05.0
pci_proc_attach_device(395) swapper(1):c0,j4294937353 1: c00000007b1a5000 - 0001:00:05.0
pci_proc_init(484) swapper(1):c0,j4294937353 0001:00:06.0
pci_proc_attach_device(395) swapper(1):c0,j4294937353 1: c00000007b1a6800 - 0001:00:06.0
pci_proc_init(484) swapper(1):c0,j4294937353 0001:00:07.0
pci_proc_attach_device(395) swapper(1):c0,j4294937353 1: c00000007b1a6000 - 0001:00:07.0
pci_proc_init(484) swapper(1):c0,j4294937353 0001:00:08.0
pci_proc_attach_device(395) swapper(1):c0,j4294937353 1: c00000007b1a7800 - 0001:00:08.0
pci_proc_init(484) swapper(1):c0,j4294937353 0001:00:09.0
pci_proc_attach_device(395) swapper(1):c0,j4294937353 1: c00000007b1a7000 - 0001:00:09.0
pci_proc_init(484) swapper(1):c0,j4294937353 0001:05:04.0
pci_proc_attach_device(395) swapper(1):c0,j4294937353 1: c00000007b1a9800 - 0001:05:04.0
pci_proc_init(484) swapper(1):c0,j4294937353 0001:05:04.1
pci_proc_attach_device(395) swapper(1):c0,j4294937353 1: c00000007b1a9000 - 0001:05:04.1
pci_proc_init(484) swapper(1):c0,j4294937353 0001:01:07.0
pci_proc_attach_device(395) swapper(1):c0,j4294937353 1: c00000007b1ab800 - 0001:01:07.0
pci_proc_init(484) swapper(1):c0,j4294937353 0001:01:0b.0
pci_proc_attach_device(395) swapper(1):c0,j4294937353 1: c00000007b1ab000 - 0001:01:0b.0
pci_proc_init(484) swapper(1):c0,j4294937353 0001:01:0b.1
pci_proc_attach_device(395) swapper(1):c0,j4294937353 1: c00000007b1ac800 - 0001:01:0b.1
pci_proc_init(484) swapper(1):c0,j4294937353 0001:01:0b.2
pci_proc_attach_device(395) swapper(1):c0,j4294937353 1: c00000007b1ac000 - 0001:01:0b.2
pci_proc_init(484) swapper(1):c0,j4294937353 0001:03:0c.0
pci_proc_attach_device(395) swapper(1):c0,j4294937353 1: c00000007b1ae800 - 0001:03:0c.0
pci_proc_init(484) swapper(1):c0,j4294937353 0001:03:0d.0
pci_proc_attach_device(395) swapper(1):c0,j4294937353 1: c00000007b1ae000 - 0001:03:0d.0
pci_proc_init(484) swapper(1):c0,j4294937353 0001:03:0e.0
pci_proc_attach_device(395) swapper(1):c0,j4294937353 1: c00000007b1af800 - 0001:03:0e.0
nvidiafb: Device ID: 10de0141
nvidiafb: CRTC0 analog found
nvidiafb: CRTC1 analog found
i2c-adapter i2c-0: unable to read EDID block.
i2c-adapter i2c-0: unable to read EDID block.
i2c-adapter i2c-0: unable to read EDID block.
nvidiafb: Found OF EDID for head 1
nvidiafb: EDID found from BUS1
nvidiafb: EDID found from BUS2
nvidiafb: CRTC 0 appears to have a CRT attached
nvidiafb: Using CRT on CRTC 0
Console: switching to colour frame buffer device 128x48
nvidiafb: PCI nVidia NV14 framebuffer (64MB @ 0x90000000)
Generic RTC Driver v1.07
...
WARNING: multiple messages have this Message-ID (diff)
From: Olaf Hering <olaf@aepfle.de>
To: Alexey Dobriyan <adobriyan@gmail.com>
Cc: linux-kernel@vger.kernel.org, linuxppc-dev@ozlabs.org
Subject: Re: pci_proc_init: proc_dir_entry '00' already registered
Date: Thu, 28 Feb 2008 20:30:53 +0100 [thread overview]
Message-ID: <20080228193053.GA9537@aepfle.de> (raw)
In-Reply-To: <20080210180003.GC1754@martell.zuzino.mipt.ru>
On Sun, Feb 10, Alexey Dobriyan wrote:
> On Sun, Feb 10, 2008 at 11:07:57AM +0100, Olaf Hering wrote:
> > Current Linus tree gives this new warning during bootup:
> >
> > +proc_dir_entry '00' already registered
> > +Call Trace:
> > +[c00000007b0dfba0] [c00000000000e4b0] .show_stack+0x70/0x1bc (unreliable)
> > +[c00000007b0dfc50] [c0000000000f2714] .proc_register+0x130/0x210
> > +[c00000007b0dfd00] [c0000000000f299c] .proc_mkdir_mode+0x40/0x70
> > +[c00000007b0dfd80] [c000000000276ed8] .pci_proc_attach_device+0xac/0x144
> > +[c00000007b0dfe20] [c0000000005bdb3c] .pci_proc_init+0x74/0xac
> > +[c00000007b0dfea0] [c0000000005a27ac] .kernel_init+0x1d0/0x394
> > +[c00000007b0dff90] [c00000000001e258] .kernel_thread+0x4c/0x68
>
> Can you insert dump_stack() when '00' is registered, not just second
> time?
Its pci_bus_add_device(). Full dmesg attached:
diff --git a/drivers/pci/bus.c b/drivers/pci/bus.c
index ef5a6a2..3c6fcd9 100644
--- a/drivers/pci/bus.c
+++ b/drivers/pci/bus.c
@@ -16,6 +16,8 @@ #include <linux/proc_fs.h>
#include <linux/init.h>
#include "pci.h"
+#define olh(fmt,args ...) \
+ printk(KERN_DEBUG "%s(%u) %s(%u):c%u,j%lu " fmt "\n",__FUNCTION__,__LINE__,current->comm,current->pid,smp_processor_id(),jiffies,##args)
/**
* pci_bus_alloc_resource - allocate a resource from a parent bus
@@ -80,6 +82,7 @@ pci_bus_alloc_resource(struct pci_bus *b
int pci_bus_add_device(struct pci_dev *dev)
{
int retval;
+ olh("%s",dev->dev.bus_id);
retval = device_add(&dev->dev);
if (retval)
return retval;
diff --git a/drivers/pci/proc.c b/drivers/pci/proc.c
index ef18fcd..1a9ef7c 100644
--- a/drivers/pci/proc.c
+++ b/drivers/pci/proc.c
@@ -6,6 +6,8 @@
* Copyright (c) 1997--1999 Martin Mares <mj@ucw.cz>
*/
+#define olh(fmt,args ...) \
+ printk(KERN_DEBUG "%s(%u) %s(%u):c%u,j%lu " fmt "\n",__FUNCTION__,__LINE__,current->comm,current->pid,smp_processor_id(),jiffies,##args)
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/module.h>
@@ -390,6 +392,7 @@ int pci_proc_attach_device(struct pci_de
struct proc_dir_entry *e;
char name[16];
+ olh("%d: %p - %s",proc_initialized,dev,dev->dev.bus_id);
if (!proc_initialized)
return -EACCES;
@@ -478,6 +481,7 @@ static int __init pci_proc_init(void)
entry->proc_fops = &proc_bus_pci_dev_operations;
proc_initialized = 1;
while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
+ olh("%s",dev->dev.bus_id);
pci_proc_attach_device(dev);
}
return 0;
DART table allocated at: c00000007f000000
Using PowerMac machine description
Page orders: linear mapping = 24, virtual = 12, io = 12
Found initrd at 0xc000000001300000:0xc000000001559c00
Found U4 memory controller & host bridge @ 0xf8000000 revision: 0x42
Mapped at 0xd000080080000000
Found a Shasta mac-io controller, rev: 0, mapped at 0xd000080080041000
PowerMac motherboard: PowerMac G5 Dual Core
DART IOMMU initialized for U4 type chipset
console [udbg0] enabled
CPU maps initialized for 1 thread per core
(thread shift is 0)
Starting Linux PPC64 #231 SMP Thu Feb 28 19:53:21 CET 2008
-----------------------------------------------------
ppc64_pft_size = 0x0
physicalMemorySize = 0x80000000
htab_address = 0xc00000007c000000
htab_hash_mask = 0x3ffff
-----------------------------------------------------
Linux version 2.6.25-rc3-g5-dirty (olaf@g5) (gcc version 4.1.0 (SUSE Linux)) #231 SMP Thu Feb 28 19:53:21 CET 2008
[boot]0012 Setup Arch
Entering add_active_range(0, 0, 524288) 0 entries of 256 used
Found U4-PCIE PCI host bridge. Firmware bus number: 0->255
PCI host bridge /pci@0,f0000000 ranges:
MEM 0x00000000f1000000..0x00000000f1ffffff -> 0x00000000f1000000
IO 0x00000000f0000000..0x00000000f07fffff -> 0x0000000000000000
MEM 0x0000000090000000..0x00000000afffffff -> 0x0000000090000000
Can't get bus-range for /ht@0,f2000000, assume bus 0
Found U3-HT PCI host bridge. Firmware bus number: 0->239
PCI host bridge /ht@0,f2000000 (primary) ranges:
SMU: Driver 0.7 (c) 2005 Benjamin Herrenschmidt, IBM Corp.
nvram: Checking bank 0...
nvram: gen0=210, gen1=211
nvram: Active bank is: 1
nvram: OF partition at 0x410
nvram: XP partition at 0x1020
nvram: NR partition at 0x1120
Top of RAM: 0x80000000, Total RAM: 0x80000000
Memory hole size: 0MB
Zone PFN ranges:
DMA 0 -> 524288
Normal 524288 -> 524288
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 524288
On node 0 totalpages: 524288
DMA zone: 7168 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 517120 pages, LIFO batch:31
Normal zone: 0 pages used for memmap
Movable zone: 0 pages used for memmap
[boot]0015 Setup Done
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517120
Kernel command line: root=UUID=a77c3a2a-dd4a-4cf6-8c74-287c49897b10 sysrq=1 quiet video=nvidiafb:1024x768@85,bpp:16 panic=12
mpic: Setting up MPIC " MPIC 1 " version 1.2 at f8040000, max 4 CPUs
mpic: ISU size: 124, shift: 7, mask: 7f
mpic: Initializing for 124 sources
mpic: Setting up HT PICs workarounds for U3/U4
mpic: - HT:07.0 [0x90] vendor 106b device 0053 has 86 irqs
PID hash table entries: 4096 (order: 12, 32768 bytes)
time_init: decrementer frequency = 33.333333 MHz
time_init: processor frequency = 2300.000000 MHz
clocksource: timebase mult[7800001] shift[22] registered
clockevent: decrementer mult[888] shift[16] cpu[0]
Console: colour dummy device 80x25
console handover: boot [udbg0] -> real [tty0]
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Memory: 2004604k/2097152k available (6632k kernel code, 91864k reserved, 940k data, 489k bss, 248k init)
Calibrating delay loop... 66.56 BogoMIPS (lpj=332800)
Mount-cache hash table entries: 256
device-tree: Duplicate name in /ht@0,f2000000/pci@8/mac-io@7/i2c@18000, renamed to "i2c-bus@0#1"
PowerMac SMP probe found 2 cpus
KeyWest i2c @0xf8001003 irq 16 /u4@0,f8000000/i2c@f8001000
channel 1 bus /u4@0,f8000000/i2c@f8001000/i2c-bus@1
KeyWest i2c @0x80018000 irq 27 /ht@0,f2000000/pci@8/mac-io@7/i2c@18000
channel 0 bus /ht@0,f2000000/pci@8/mac-io@7/i2c@18000/i2c-bus@0
channel 0 bus /ht@0,f2000000/pci@8/mac-io@7/i2c@18000/i2c-bus@0
SMU i2c /smu@0,0/smu-i2c-control@0
channel b bus /smu@0,0/smu-i2c-control@0/i2c-bus@b
channel e bus /smu@0,0/smu-i2c-control@0/i2c-bus@e
Processor timebase sync using platform function
mpic: requesting IPIs ...
Processor 1 found.
clockevent: decrementer mult[888] shift[16] cpu[1]
Brought up 2 CPUs
net_namespace: 304 bytes
NET: Registered protocol family 16
PCI: Probing PCI hardware
IOMMU table initialized, virtual merging enabled
PCI: Closing bogus Apple Firmware region 2 on bus 0x0a
pci_bus_add_device(85) swapper(1):c0,j4294937324 0000:00:0b.0
pci_proc_attach_device(395) swapper(1):c0,j4294937324 0: c00000007b113800 - 0000:00:0b.0
pci_bus_add_device(85) swapper(1):c0,j4294937324 0000:0a:00.0
pci_proc_attach_device(395) swapper(1):c0,j4294937324 0: c00000007b113000 - 0000:0a:00.0
PCI: Closing bogus Apple Firmware region 2 on bus 0x02
PCI: Closing bogus Apple Firmware region 2 on bus 0x01
PCI: Closing bogus Apple Firmware region 2 on bus 0x03
pci_bus_add_device(85) swapper(1):c0,j4294937324 0001:00:00.0
pci_proc_attach_device(395) swapper(1):c0,j4294937324 0: c00000007b149800 - 0001:00:00.0
pci_bus_add_device(85) swapper(1):c0,j4294937324 0001:00:01.0
pci_proc_attach_device(395) swapper(1):c0,j4294937324 0: c00000007b149000 - 0001:00:01.0
pci_bus_add_device(85) swapper(1):c0,j4294937324 0001:00:02.0
pci_proc_attach_device(395) swapper(1):c0,j4294937324 0: c00000007b1a4800 - 0001:00:02.0
pci_bus_add_device(85) swapper(1):c0,j4294937324 0001:00:03.0
pci_proc_attach_device(395) swapper(1):c0,j4294937324 0: c00000007b1a4000 - 0001:00:03.0
pci_bus_add_device(85) swapper(1):c0,j4294937324 0001:00:04.0
pci_proc_attach_device(395) swapper(1):c0,j4294937324 0: c00000007b1a5800 - 0001:00:04.0
pci_bus_add_device(85) swapper(1):c0,j4294937324 0001:00:05.0
pci_proc_attach_device(395) swapper(1):c0,j4294937324 0: c00000007b1a5000 - 0001:00:05.0
pci_bus_add_device(85) swapper(1):c0,j4294937324 0001:00:06.0
pci_proc_attach_device(395) swapper(1):c0,j4294937324 0: c00000007b1a6800 - 0001:00:06.0
pci_bus_add_device(85) swapper(1):c0,j4294937324 0001:00:07.0
pci_proc_attach_device(395) swapper(1):c0,j4294937324 0: c00000007b1a6000 - 0001:00:07.0
pci_bus_add_device(85) swapper(1):c0,j4294937324 0001:00:08.0
pci_proc_attach_device(395) swapper(1):c0,j4294937324 0: c00000007b1a7800 - 0001:00:08.0
pci_bus_add_device(85) swapper(1):c0,j4294937324 0001:00:09.0
pci_proc_attach_device(395) swapper(1):c0,j4294937324 0: c00000007b1a7000 - 0001:00:09.0
pci_bus_add_device(85) swapper(1):c0,j4294937324 0001:05:04.0
pci_proc_attach_device(395) swapper(1):c0,j4294937324 0: c00000007b1a9800 - 0001:05:04.0
pci_bus_add_device(85) swapper(1):c0,j4294937324 0001:05:04.1
pci_proc_attach_device(395) swapper(1):c0,j4294937324 0: c00000007b1a9000 - 0001:05:04.1
pci_bus_add_device(85) swapper(1):c0,j4294937324 0001:01:07.0
pci_proc_attach_device(395) swapper(1):c0,j4294937324 0: c00000007b1ab800 - 0001:01:07.0
pci_bus_add_device(85) swapper(1):c0,j4294937324 0001:01:0b.0
pci_proc_attach_device(395) swapper(1):c0,j4294937324 0: c00000007b1ab000 - 0001:01:0b.0
pci_bus_add_device(85) swapper(1):c0,j4294937324 0001:01:0b.1
pci_proc_attach_device(395) swapper(1):c0,j4294937324 0: c00000007b1ac800 - 0001:01:0b.1
pci_bus_add_device(85) swapper(1):c0,j4294937324 0001:01:0b.2
pci_proc_attach_device(395) swapper(1):c0,j4294937324 0: c00000007b1ac000 - 0001:01:0b.2
pci_bus_add_device(85) swapper(1):c0,j4294937324 0001:03:0c.0
pci_proc_attach_device(395) swapper(1):c0,j4294937324 0: c00000007b1ae800 - 0001:03:0c.0
pci_bus_add_device(85) swapper(1):c0,j4294937324 0001:03:0d.0
pci_proc_attach_device(395) swapper(1):c0,j4294937324 0: c00000007b1ae000 - 0001:03:0d.0
pci_bus_add_device(85) swapper(1):c0,j4294937324 0001:03:0e.0
pci_proc_attach_device(395) swapper(1):c0,j4294937324 0: c00000007b1af800 - 0001:03:0e.0
PCI: Cannot allocate resource region 0 of device 0000:0a:00.0, will remap
PCI: Cannot allocate resource region 1 of device 0000:0a:00.0, will remap
PCI: Cannot allocate resource region 3 of device 0000:0a:00.0, will remap
PCI: Bridge: 0000:00:0b.0
IO window: 0000-ffff
MEM window: 0xa8000000-0xa9ffffff
PREFETCH window: 0x0000000090000000-0x00000000a7ffffff
PCI: Bridge: 0001:00:01.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0001:00:02.0
IO window: disabled.
MEM window: 0xfa500000-0xfa5fffff
PREFETCH window: disabled.
PCI: Bridge: 0001:00:03.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0001:00:04.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0001:00:05.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0001:00:06.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0001:00:07.0
IO window: disabled.
MEM window: 0xfa000000-0xfa3fffff
PREFETCH window: disabled.
PCI: Bridge: 0001:00:08.0
IO window: disabled.
MEM window: 0x80000000-0x800fffff
PREFETCH window: disabled.
PCI: Bridge: 0001:00:09.0
IO window: disabled.
MEM window: 0xfa400000-0xfa4fffff
PREFETCH window: disabled.
PCI: Probing PCI hardware done
Registering pmac pic with sysfs...
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
NET: Registered protocol family 2
Time: timebase clocksource has been installed.
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 1
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
Unpacking initramfs... done
Freeing initrd memory: 2407k freed
nvram_init: Could not find nvram partition for nvram buffered error logging.
Registering G5 CPU frequency driver
Frequency method: SCOM, Voltage method: GPIO
Low: 1150 Mhz, High: 2300 Mhz, Cur: 2300 MHz
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
SGI XFS with large block/inode numbers, no debug enabled
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_proc_init(484) swapper(1):c0,j4294937353 0000:00:0b.0
pci_proc_attach_device(395) swapper(1):c0,j4294937353 1: c00000007b113800 - 0000:00:0b.0
pci_proc_init(484) swapper(1):c0,j4294937353 0000:0a:00.0
pci_proc_attach_device(395) swapper(1):c0,j4294937353 1: c00000007b113000 - 0000:0a:00.0
pci_proc_init(484) swapper(1):c0,j4294937353 0001:00:00.0
pci_proc_attach_device(395) swapper(1):c0,j4294937353 1: c00000007b149800 - 0001:00:00.0
proc_dir_entry '00' already registered
Call Trace:
[c00000007b0dfb60] [c00000000000f4ec] .show_stack+0x5c/0x1f0 (unreliable)
[c00000007b0dfc10] [c000000000112e40] .proc_register+0x190/0x250
[c00000007b0dfcd0] [c000000000113130] .proc_mkdir_mode+0x40/0x80
[c00000007b0dfd50] [c0000000002c7548] .pci_proc_attach_device+0x158/0x190
[c00000007b0dfe00] [c00000000065c3f8] .pci_proc_init+0xb8/0x100
[c00000007b0dfe90] [c00000000063c8a8] .kernel_init+0x1d8/0x420
[c00000007b0dff90] [c000000000021dac] .kernel_thread+0x4c/0x68
pci_proc_init(484) swapper(1):c0,j4294937353 0001:00:01.0
pci_proc_attach_device(395) swapper(1):c0,j4294937353 1: c00000007b149000 - 0001:00:01.0
pci_proc_init(484) swapper(1):c0,j4294937353 0001:00:02.0
pci_proc_attach_device(395) swapper(1):c0,j4294937353 1: c00000007b1a4800 - 0001:00:02.0
pci_proc_init(484) swapper(1):c0,j4294937353 0001:00:03.0
pci_proc_attach_device(395) swapper(1):c0,j4294937353 1: c00000007b1a4000 - 0001:00:03.0
pci_proc_init(484) swapper(1):c0,j4294937353 0001:00:04.0
pci_proc_attach_device(395) swapper(1):c0,j4294937353 1: c00000007b1a5800 - 0001:00:04.0
pci_proc_init(484) swapper(1):c0,j4294937353 0001:00:05.0
pci_proc_attach_device(395) swapper(1):c0,j4294937353 1: c00000007b1a5000 - 0001:00:05.0
pci_proc_init(484) swapper(1):c0,j4294937353 0001:00:06.0
pci_proc_attach_device(395) swapper(1):c0,j4294937353 1: c00000007b1a6800 - 0001:00:06.0
pci_proc_init(484) swapper(1):c0,j4294937353 0001:00:07.0
pci_proc_attach_device(395) swapper(1):c0,j4294937353 1: c00000007b1a6000 - 0001:00:07.0
pci_proc_init(484) swapper(1):c0,j4294937353 0001:00:08.0
pci_proc_attach_device(395) swapper(1):c0,j4294937353 1: c00000007b1a7800 - 0001:00:08.0
pci_proc_init(484) swapper(1):c0,j4294937353 0001:00:09.0
pci_proc_attach_device(395) swapper(1):c0,j4294937353 1: c00000007b1a7000 - 0001:00:09.0
pci_proc_init(484) swapper(1):c0,j4294937353 0001:05:04.0
pci_proc_attach_device(395) swapper(1):c0,j4294937353 1: c00000007b1a9800 - 0001:05:04.0
pci_proc_init(484) swapper(1):c0,j4294937353 0001:05:04.1
pci_proc_attach_device(395) swapper(1):c0,j4294937353 1: c00000007b1a9000 - 0001:05:04.1
pci_proc_init(484) swapper(1):c0,j4294937353 0001:01:07.0
pci_proc_attach_device(395) swapper(1):c0,j4294937353 1: c00000007b1ab800 - 0001:01:07.0
pci_proc_init(484) swapper(1):c0,j4294937353 0001:01:0b.0
pci_proc_attach_device(395) swapper(1):c0,j4294937353 1: c00000007b1ab000 - 0001:01:0b.0
pci_proc_init(484) swapper(1):c0,j4294937353 0001:01:0b.1
pci_proc_attach_device(395) swapper(1):c0,j4294937353 1: c00000007b1ac800 - 0001:01:0b.1
pci_proc_init(484) swapper(1):c0,j4294937353 0001:01:0b.2
pci_proc_attach_device(395) swapper(1):c0,j4294937353 1: c00000007b1ac000 - 0001:01:0b.2
pci_proc_init(484) swapper(1):c0,j4294937353 0001:03:0c.0
pci_proc_attach_device(395) swapper(1):c0,j4294937353 1: c00000007b1ae800 - 0001:03:0c.0
pci_proc_init(484) swapper(1):c0,j4294937353 0001:03:0d.0
pci_proc_attach_device(395) swapper(1):c0,j4294937353 1: c00000007b1ae000 - 0001:03:0d.0
pci_proc_init(484) swapper(1):c0,j4294937353 0001:03:0e.0
pci_proc_attach_device(395) swapper(1):c0,j4294937353 1: c00000007b1af800 - 0001:03:0e.0
nvidiafb: Device ID: 10de0141
nvidiafb: CRTC0 analog found
nvidiafb: CRTC1 analog found
i2c-adapter i2c-0: unable to read EDID block.
i2c-adapter i2c-0: unable to read EDID block.
i2c-adapter i2c-0: unable to read EDID block.
nvidiafb: Found OF EDID for head 1
nvidiafb: EDID found from BUS1
nvidiafb: EDID found from BUS2
nvidiafb: CRTC 0 appears to have a CRT attached
nvidiafb: Using CRT on CRTC 0
Console: switching to colour frame buffer device 128x48
nvidiafb: PCI nVidia NV14 framebuffer (64MB @ 0x90000000)
Generic RTC Driver v1.07
...
next prev parent reply other threads:[~2008-02-28 19:31 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-02-10 10:07 pci_proc_init: proc_dir_entry '00' already registered Olaf Hering
2008-02-10 18:00 ` Alexey Dobriyan
2008-02-10 18:00 ` Alexey Dobriyan
2008-02-28 19:30 ` Olaf Hering [this message]
2008-02-28 19:30 ` Olaf Hering
-- strict thread matches above, loose matches on Subject: below --
2008-04-28 21:07 Alexey Dobriyan
2008-04-28 21:07 ` Alexey Dobriyan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080228193053.GA9537@aepfle.de \
--to=olaf@aepfle.de \
--cc=adobriyan@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.