* [PATCH] mpt fusion: Enable MSI by default for SAS controllers
@ 2008-03-07 10:23 Prakash, Sathya
0 siblings, 0 replies; only message in thread
From: Prakash, Sathya @ 2008-03-07 10:23 UTC (permalink / raw)
To: linux-scsi; +Cc: eric.moore, djwong
This patch modifies the driver to enable MSI by default for all SAS chips.
Signed-off-by: Sathya Prakash <sathya.prakash@lsi.com>
---
diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c
index 6b6df86..7587413 100644
--- a/drivers/message/fusion/mptbase.c
+++ b/drivers/message/fusion/mptbase.c
@@ -79,7 +79,7 @@ MODULE_VERSION(my_VERSION);
/*
* cmd line parameters
*/
-static int mpt_msi_enable;
+static int mpt_msi_enable = -1;
module_param(mpt_msi_enable, int, 0);
MODULE_PARM_DESC(mpt_msi_enable, " MSI Support Enable (default=0)");
@@ -1660,6 +1660,11 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
ioc->bus_type = SAS;
}
+ if (ioc->bus_type == SAS && mpt_msi_enable == -1)
+ ioc->msi_enable = 1;
+ else
+ ioc->msi_enable = mpt_msi_enable;
+
if (ioc->errata_flag_1064)
pci_disable_io_access(pdev);
@@ -2021,15 +2026,17 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP)) {
ioc->pci_irq = -1;
if (ioc->pcidev->irq) {
- if (mpt_msi_enable && !pci_enable_msi(ioc->pcidev))
+ if (ioc->msi_enable && !pci_enable_msi(ioc->pcidev))
printk(MYIOC_s_INFO_FMT "PCI-MSI enabled\n",
ioc->name);
+ else
+ ioc->msi_enable = 0;
rc = request_irq(ioc->pcidev->irq, mpt_interrupt,
IRQF_SHARED, ioc->name, ioc);
if (rc < 0) {
printk(MYIOC_s_ERR_FMT "Unable to allocate "
"interrupt %d!\n", ioc->name, ioc->pcidev->irq);
- if (mpt_msi_enable)
+ if (ioc->msi_enable)
pci_disable_msi(ioc->pcidev);
return -EBUSY;
}
@@ -2225,7 +2232,7 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
out:
if ((ret != 0) && irq_allocated) {
free_irq(ioc->pci_irq, ioc);
- if (mpt_msi_enable)
+ if (ioc->msi_enable)
pci_disable_msi(ioc->pcidev);
}
return ret;
@@ -2407,7 +2414,7 @@ mpt_adapter_dispose(MPT_ADAPTER *ioc)
if (ioc->pci_irq != -1) {
free_irq(ioc->pci_irq, ioc);
- if (mpt_msi_enable)
+ if (ioc->msi_enable)
pci_disable_msi(ioc->pcidev);
ioc->pci_irq = -1;
}
diff --git a/drivers/message/fusion/mptbase.h b/drivers/message/fusion/mptbase.h
index caadc68..50c0c17 100644
--- a/drivers/message/fusion/mptbase.h
+++ b/drivers/message/fusion/mptbase.h
@@ -630,6 +630,7 @@ typedef struct _MPT_ADAPTER
int mtrr_reg;
struct pci_dev *pcidev; /* struct pci_dev pointer */
int bars; /* bitmask of BAR's that must be configured */
+ int msi_enable;
u8 __iomem *memmap; /* mmap address */
struct Scsi_Host *sh; /* Scsi Host pointer */
SpiCfgData spi_data; /* Scsi config. data */
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2008-03-07 10:31 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-03-07 10:23 [PATCH] mpt fusion: Enable MSI by default for SAS controllers Prakash, Sathya
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.