From: Paul Gortmaker <paul.gortmaker@windriver.com>
To: Adrian Bunk <bunk@kernel.org>
Cc: linuxppc-dev@ozlabs.org, Paul Mackerras <paulus@samba.org>,
linux-kernel@vger.kernel.org
Subject: Re: powerpc: cuImage.* creation error
Date: Mon, 17 Mar 2008 16:07:55 -0400 [thread overview]
Message-ID: <20080317200754.GA7383@windriver.com> (raw)
In-Reply-To: <20080317193652.GA9550@cs181133002.pp.htv.fi>
In message: powerpc: cuImage.* creation error
on 17/03/2008 Adrian Bunk wrote:
> When building all powerpc defconfigs in 2.6.25-rc6 exactly three of
> them fail to build, and all with similar problems:
>
> <-- snip -->
>
>
> sbc8548_defconfig:
>
> <-- snip -->
>
> ...
> Entry Point: 0x00000000
> make[2]: *** No rule to make target `arch/powerpc/boot/cuImage.tqm8548', needed by `arch/powerpc/boot/zImage'. Stop.
>
Untested, but I'll guess that this is at least part of the problem for
the sbc one...
Thanks,
Paul.
---
Author: Paul Gortmaker <paul.gortmaker@windriver.com>
Date: Mon Mar 17 15:47:03 2008 -0400
cuimage: fix board names in Makefile
Fix the copy and paste error from 25431333813686654907ab987fb5de10c10a16db
for the sbc8548 and sbc8560
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index 4974d9e..1aded8f 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -253,8 +253,8 @@ image-$(CONFIG_TQM8540) += cuImage.tqm8540
image-$(CONFIG_TQM8541) += cuImage.tqm8541
image-$(CONFIG_TQM8555) += cuImage.tqm8555
image-$(CONFIG_TQM8560) += cuImage.tqm8560
-image-$(CONFIG_SBC8548) += cuImage.tqm8548
-image-$(CONFIG_SBC8560) += cuImage.tqm8560
+image-$(CONFIG_SBC8548) += cuImage.sbc8548
+image-$(CONFIG_SBC8560) += cuImage.sbc8560
# Board ports in arch/powerpc/platform/embedded6xx/Kconfig
image-$(CONFIG_STORCENTER) += cuImage.storcenter
WARNING: multiple messages have this Message-ID (diff)
From: Paul Gortmaker <paul.gortmaker@windriver.com>
To: Adrian Bunk <bunk@kernel.org>
Cc: Kumar Gala <galak@kernel.crashing.org>,
Grant Likely <grant.likely@secretlab.ca>,
Paul Mackerras <paulus@samba.org>,
linuxppc-dev@ozlabs.org, linux-kernel@vger.kernel.org
Subject: Re: powerpc: cuImage.* creation error
Date: Mon, 17 Mar 2008 16:07:55 -0400 [thread overview]
Message-ID: <20080317200754.GA7383@windriver.com> (raw)
In-Reply-To: <20080317193652.GA9550@cs181133002.pp.htv.fi>
In message: powerpc: cuImage.* creation error
on 17/03/2008 Adrian Bunk wrote:
> When building all powerpc defconfigs in 2.6.25-rc6 exactly three of
> them fail to build, and all with similar problems:
>
> <-- snip -->
>
>
> sbc8548_defconfig:
>
> <-- snip -->
>
> ...
> Entry Point: 0x00000000
> make[2]: *** No rule to make target `arch/powerpc/boot/cuImage.tqm8548', needed by `arch/powerpc/boot/zImage'. Stop.
>
Untested, but I'll guess that this is at least part of the problem for
the sbc one...
Thanks,
Paul.
---
Author: Paul Gortmaker <paul.gortmaker@windriver.com>
Date: Mon Mar 17 15:47:03 2008 -0400
cuimage: fix board names in Makefile
Fix the copy and paste error from 25431333813686654907ab987fb5de10c10a16db
for the sbc8548 and sbc8560
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index 4974d9e..1aded8f 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -253,8 +253,8 @@ image-$(CONFIG_TQM8540) += cuImage.tqm8540
image-$(CONFIG_TQM8541) += cuImage.tqm8541
image-$(CONFIG_TQM8555) += cuImage.tqm8555
image-$(CONFIG_TQM8560) += cuImage.tqm8560
-image-$(CONFIG_SBC8548) += cuImage.tqm8548
-image-$(CONFIG_SBC8560) += cuImage.tqm8560
+image-$(CONFIG_SBC8548) += cuImage.sbc8548
+image-$(CONFIG_SBC8560) += cuImage.sbc8560
# Board ports in arch/powerpc/platform/embedded6xx/Kconfig
image-$(CONFIG_STORCENTER) += cuImage.storcenter
next prev parent reply other threads:[~2008-03-17 20:18 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-03-17 19:36 powerpc: cuImage.* creation error Adrian Bunk
2008-03-17 19:39 ` Grant Likely
2008-03-17 19:39 ` Grant Likely
2008-03-17 20:07 ` Paul Gortmaker [this message]
2008-03-17 20:07 ` Paul Gortmaker
2008-03-17 22:23 ` Adrian Bunk
2008-03-17 22:23 ` Adrian Bunk
2008-03-17 22:41 ` Grant Likely
2008-03-17 22:41 ` Grant Likely
2008-03-17 22:46 ` Paul Gortmaker
2008-03-17 22:46 ` Paul Gortmaker
2008-03-17 23:22 ` Grant Likely
2008-03-17 23:22 ` Grant Likely
2008-03-18 5:10 ` Grant Likely
2008-03-18 5:10 ` Grant Likely
2008-03-17 22:39 ` Grant Likely
2008-03-17 22:39 ` Grant Likely
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080317200754.GA7383@windriver.com \
--to=paul.gortmaker@windriver.com \
--cc=bunk@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@ozlabs.org \
--cc=paulus@samba.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.