From: Matteo Croce <technoboy85@gmail.com>
To: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: linux-mips@linux-mips.org, Florian Fainelli <florian@openwrt.org>,
Felix Fietkau <nbd@openwrt.org>, Nicolas Thill <nico@openwrt.org>,
linux-serial@vger.kernel.org,
Andrew Morton <akpm@linux-foundation.org>
Subject: Re: [PATCH][MIPS][5/6]: AR7: serial hack
Date: Thu, 27 Mar 2008 22:14:21 +0100 [thread overview]
Message-ID: <200803272214.21456.technoboy85@gmail.com> (raw)
In-Reply-To: <20080321015540.GA30988@alpha.franken.de>
Il Friday 21 March 2008 02:55:40 Thomas Bogendoerfer ha scritto:
> On Sun, Mar 16, 2008 at 04:45:06PM +0100, Matteo Croce wrote:
> > Tried I get teh usual broken serial output:
> >
> > IP6 oover IPv4 tuneliing driver
> > NET: eggistered protooll family 17
> > VFS: Monteed root (squahfss filesystem)reaadonly.
>
> Linux version 2.6.25-rc6-00000-g151de9e-dirty (tsbogend@solo.franken.de)
> (gcc version 3.3.3 (Debian 20040320)) #29 Fri Mar 21 02:40:21 CET 2008
> console [early0] enabled
> CPU revision is: 00018448 (MIPS 4KEc)
> TI AR7 (Unknown), ID: 0x5700, Revision: 0x00
> Determined physical RAM map:
> memory: 02000000 @ 14000000 (usable)
> Zone PFN ranges:
> Normal 81920 -> 90112
> Movable zone start PFN for each node
> early_node_map[1] active PFN ranges
> 0: 81920 -> 90112
> Built 1 zonelists in Zone order, mobility grouping on. Total pages:
> 8128
> Kernel command line: console=ttyS0,115200
> Primary instruction cache 16kB, VIPT, 4-way, linesize 16 bytes.
> Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 16 bytes
> Synthesized clear page handler (26 instructions).
> Synthesized copy page handler (46 instructions).
> PID hash table entries: 128 (order: 7, 512 bytes)
> Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
> Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
> Memory: 29700k/32768k available (2075k kernel code, 3068k reserved, 466k
> data, 136k init, 0k highmem)
> Mount-cache hash table entries: 512
> net_namespace: 152 bytes
> NET: Registered protocol family 16
> SCSI subsystem initialized
> NET: Registered protocol family 2
> Time: MIPS clocksource has been installed.
> IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
> TCP established hash table entries: 1024 (order: 1, 8192 bytes)
> TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
> TCP: Hash tables configured (established 1024 bind 1024)
> TCP reno registered
> io scheduler noop registered
> io scheduler anticipatory registered (default)
> io scheduler deadline registered
> Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing
> disabled
> serial8250: ttyS0 at MMIO 0x8610e03 (irq = 15) is a 16550A
> console handover: boot [early0] -> real [ttyS0]
> serial8250: ttyS1 at MMIO 0x8610f03 (irq = 16) is a 16550A
> loop: module loaded
> Fixed MDIO Bus: probed
> ar7_wdt: failed to unlock WDT disable reg
> ar7_wdt: failed to unlock WDT prescale reg
> ar7_wdt: failed to unlock WDT change reg
> ar7_wdt: timer margin 59 seconds (prescale 65535, change 57180, freq
> 62500000)
> TCP cubic registered
> NET: Registered protocol family 1
> NET: Registered protocol family 17
> RPC: Registered udp transport module.
> RPC: Registered tcp transport module.
> Root-NFS: No NFS server available, giving up.
> VFS: Unable to mount root fs via NFS, trying floppy.
> List of all partitions:
> No filesystem could mount root, tried:
> Kernel panic - not syncing: VFS: Unable to mount root fs on
> unknown-block(2,0)
> Rebooting in 3 seconds..
>
> I don't see any problems with using PORT_16550A. What I'm still
> wondering how your kernel could work at all, since there is a
> missing case for setting up the TLB refill handler. Something like
> the patch below.
>
> And most of the AR7 device driver code will not work for big endian.
> The log above is from a big endian AR7 system, where I needed
> to disable CPMAC to get it booting that far.
>
> Thomas.
>
>
> diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c
> index 3a93d4c..382738c 100644
> --- a/arch/mips/mm/tlbex.c
> +++ b/arch/mips/mm/tlbex.c
> @@ -307,6 +307,7 @@ static void __cpuinit build_tlb_write_entry(u32 **p, struct uasm_label **l,
> case CPU_R12000:
> case CPU_R14000:
> case CPU_4KC:
> + case CPU_4KEC:
> case CPU_SB1:
> case CPU_SB1A:
> case CPU_4KSC:
>
>
Actually we use this for 2.6.24:
Index: linux-2.6.24/arch/mips/mm/tlbex.c
===================================================================
--- linux-2.6.24/arch/mips/mm/tlbex.c 2007-10-10 04:31:38.000000000 +0800
+++ linux-2.6.24/arch/mips/mm/tlbex.c 2007-10-10 13:52:34.000000000 +0800
@@ -902,7 +902,6 @@
case CPU_R10000:
case CPU_R12000:
case CPU_R14000:
- case CPU_4KC:
case CPU_SB1:
case CPU_SB1A:
case CPU_4KSC:
@@ -933,6 +932,7 @@
tlbw(p);
break;
+ case CPU_4KC:
case CPU_4KEC:
case CPU_24K:
case CPU_34K:
next prev parent reply other threads:[~2008-03-27 21:14 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-03-12 1:21 [PATCH][MIPS][0/6]: AR7 final Matteo Croce
2008-03-12 1:25 ` [PATCH][MIPS][2/6]: AR7 mtd partition map Matteo Croce
2008-03-12 1:25 ` Matteo Croce
2008-03-12 1:26 ` [PATCH][MIPS][3/6]: AR7: VLYNQ bus Matteo Croce
2008-03-29 9:59 ` Florian Lohoff
2008-04-02 12:56 ` Matteo Croce
2008-04-02 18:31 ` Florian Lohoff
2008-04-03 0:19 ` Matteo Croce
2008-04-03 6:08 ` Florian Lohoff
2008-04-02 13:57 ` Matteo Croce
2008-04-02 14:58 ` Matteo Croce
2008-03-12 1:28 ` [PATCH][MIPS][4/6]: AR7 gpio Matteo Croce
2008-03-12 1:30 ` [PATCH][MIPS][5/6]: AR7: serial hack Matteo Croce
2008-03-12 9:31 ` Thomas Bogendoerfer
2008-03-13 0:38 ` Matteo Croce
2008-03-13 8:45 ` Thomas Bogendoerfer
2008-03-14 15:46 ` Matteo Croce
2008-03-15 10:40 ` Thomas Bogendoerfer
2008-03-16 15:45 ` Matteo Croce
2008-03-18 13:30 ` Thomas Bogendoerfer
2008-03-18 13:43 ` Sergei Shtylyov
2008-03-18 13:49 ` Sergei Shtylyov
2008-03-18 14:01 ` Alan Cox
2008-03-18 14:01 ` Alan Cox
2008-03-18 15:28 ` Thomas Bogendoerfer
2008-03-21 1:55 ` Thomas Bogendoerfer
2008-03-27 21:14 ` Matteo Croce [this message]
2008-03-27 21:17 ` Matteo Croce
2008-03-15 11:38 ` Alan Cox
2008-03-12 11:16 ` Alan Cox
2008-03-13 0:31 ` Matteo Croce
2008-03-13 9:01 ` Thomas Bogendoerfer
2008-03-16 15:27 ` Matteo Croce
2008-03-16 15:49 ` Matteo Croce
2008-03-12 1:34 ` [PATCH][MIPS][6/6]: AR7 leds Matteo Croce
2008-03-13 0:34 ` Matteo Croce
2008-03-12 18:06 ` [PATCH][MIPS][1/6]: AR7: core Matteo Croce
2008-03-12 19:33 ` Ralf Baechle
2008-03-29 10:34 ` Florian Lohoff
-- strict thread matches above, loose matches on Subject: below --
2008-03-18 15:40 [PATCH][MIPS][5/6]: AR7: serial hack Nico Coesel
2008-03-18 15:40 ` Nico Coesel
2007-12-27 18:19 [PATCH][MIPS][0/6]: AR7 refresh Matteo Croce
2007-12-27 18:27 ` [PATCH][MIPS][5/6]: AR7: serial hack Matteo Croce
2007-12-28 12:13 ` Sergei Shtylyov
2007-10-11 0:48 [PATCH][MIPS][0/6] AR7: AR7 strikes back Matteo Croce
2007-10-11 0:59 ` [PATCH][MIPS][5/6] AR7: serial hack Matteo Croce
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200803272214.21456.technoboy85@gmail.com \
--to=technoboy85@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=florian@openwrt.org \
--cc=linux-mips@linux-mips.org \
--cc=linux-serial@vger.kernel.org \
--cc=nbd@openwrt.org \
--cc=nico@openwrt.org \
--cc=tsbogend@alpha.franken.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.