From: Dale Farnsworth <dale@farnsworth.org>
To: paulus@samba.org
Cc: linuxppc-dev@ozlabs.org
Subject: Re: [PATCH 1/9] [POWERPC] mv64x60: change FDT compatible prefix to mrvl
Date: Fri, 28 Mar 2008 16:42:41 -0700 [thread overview]
Message-ID: <20080328234241.GA30214@farnsworth.org> (raw)
In-Reply-To: <20080328233954.GA29499@farnsworth.org>
From: Dale Farnsworth <dale@farnsworth.org>
Follow the convention that compatible names are prefixed by the
vendor's stock ticker symbol. For Marvell Technology Group Ltd.,
that's MRVL.
Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
Acked-by: Mark A. Greer <mgreer@mvista.com>
Index: linux-2.6/arch/powerpc/boot/dts/prpmc2800.dts
===================================================================
--- linux-2.6.orig/arch/powerpc/boot/dts/prpmc2800.dts
+++ linux-2.6/arch/powerpc/boot/dts/prpmc2800.dts
@@ -44,7 +44,7 @@
#address-cells = <1>;
#size-cells = <1>;
model = "mv64360"; /* Default */
- compatible = "marvell,mv64x60";
+ compatible = "mrvl,mv64x60";
clock-frequency = <7f28155>; /* 133.333333 MHz */
reg = <f1000000 00010000>;
virtual-reg = <f1000000>;
@@ -72,7 +72,7 @@
#address-cells = <1>;
#size-cells = <0>;
device_type = "mdio";
- compatible = "marvell,mv64x60-mdio";
+ compatible = "mrvl,mv64x60-mdio";
ethernet-phy@1 {
device_type = "ethernet-phy";
compatible = "broadcom,bcm5421";
@@ -93,7 +93,7 @@
reg = <2000 2000>;
eth0 {
device_type = "network";
- compatible = "marvell,mv64x60-eth";
+ compatible = "mrvl,mv64x60-eth";
block-index = <0>;
interrupts = <20>;
interrupt-parent = <&/mv64x60/pic>;
@@ -102,7 +102,7 @@
};
eth1 {
device_type = "network";
- compatible = "marvell,mv64x60-eth";
+ compatible = "mrvl,mv64x60-eth";
block-index = <1>;
interrupts = <21>;
interrupt-parent = <&/mv64x60/pic>;
@@ -113,7 +113,7 @@
sdma@4000 {
device_type = "dma";
- compatible = "marvell,mv64x60-sdma";
+ compatible = "mrvl,mv64x60-sdma";
reg = <4000 c18>;
virtual-reg = <f1004000>;
interrupt-base = <0>;
@@ -123,7 +123,7 @@
sdma@6000 {
device_type = "dma";
- compatible = "marvell,mv64x60-sdma";
+ compatible = "mrvl,mv64x60-sdma";
reg = <6000 c18>;
virtual-reg = <f1006000>;
interrupt-base = <0>;
@@ -132,7 +132,7 @@
};
brg@b200 {
- compatible = "marvell,mv64x60-brg";
+ compatible = "mrvl,mv64x60-brg";
reg = <b200 8>;
clock-src = <8>;
clock-frequency = <7ed6b40>;
@@ -141,7 +141,7 @@
};
brg@b208 {
- compatible = "marvell,mv64x60-brg";
+ compatible = "mrvl,mv64x60-brg";
reg = <b208 8>;
clock-src = <8>;
clock-frequency = <7ed6b40>;
@@ -164,7 +164,7 @@
mpsc@8000 {
device_type = "serial";
- compatible = "marvell,mpsc";
+ compatible = "mrvl,mpsc";
reg = <8000 38>;
virtual-reg = <f1008000>;
sdma = <&/mv64x60/sdma@4000>;
@@ -184,7 +184,7 @@
mpsc@9000 {
device_type = "serial";
- compatible = "marvell,mpsc";
+ compatible = "mrvl,mpsc";
reg = <9000 38>;
virtual-reg = <f1009000>;
sdma = <&/mv64x60/sdma@6000>;
@@ -203,14 +203,14 @@
};
wdt@b410 { /* watchdog timer */
- compatible = "marvell,mv64x60-wdt";
+ compatible = "mrvl,mv64x60-wdt";
reg = <b410 8>;
timeout = <a>; /* wdt timeout in seconds */
};
i2c@c000 {
device_type = "i2c";
- compatible = "marvell,mv64x60-i2c";
+ compatible = "mrvl,mv64x60-i2c";
reg = <c000 20>;
virtual-reg = <f100c000>;
freq_m = <8>;
@@ -224,18 +224,18 @@
pic {
#interrupt-cells = <1>;
#address-cells = <0>;
- compatible = "marvell,mv64x60-pic";
+ compatible = "mrvl,mv64x60-pic";
reg = <0000 88>;
interrupt-controller;
};
mpp@f000 {
- compatible = "marvell,mv64x60-mpp";
+ compatible = "mrvl,mv64x60-mpp";
reg = <f000 10>;
};
gpp@f100 {
- compatible = "marvell,mv64x60-gpp";
+ compatible = "mrvl,mv64x60-gpp";
reg = <f100 20>;
};
@@ -244,7 +244,7 @@
#size-cells = <2>;
#interrupt-cells = <1>;
device_type = "pci";
- compatible = "marvell,mv64x60-pci";
+ compatible = "mrvl,mv64x60-pci";
reg = <0cf8 8>;
ranges = <01000000 0 0 88000000 0 01000000
02000000 0 80000000 80000000 0 08000000>;
@@ -281,28 +281,28 @@
};
cpu-error@0070 {
- compatible = "marvell,mv64x60-cpu-error";
+ compatible = "mrvl,mv64x60-cpu-error";
reg = <0070 10 0128 28>;
interrupts = <03>;
interrupt-parent = <&/mv64x60/pic>;
};
sram-ctrl@0380 {
- compatible = "marvell,mv64x60-sram-ctrl";
+ compatible = "mrvl,mv64x60-sram-ctrl";
reg = <0380 80>;
interrupts = <0d>;
interrupt-parent = <&/mv64x60/pic>;
};
pci-error@1d40 {
- compatible = "marvell,mv64x60-pci-error";
+ compatible = "mrvl,mv64x60-pci-error";
reg = <1d40 40 0c28 4>;
interrupts = <0c>;
interrupt-parent = <&/mv64x60/pic>;
};
mem-ctrl@1400 {
- compatible = "marvell,mv64x60-mem-ctrl";
+ compatible = "mrvl,mv64x60-mem-ctrl";
reg = <1400 60>;
interrupts = <11>;
interrupt-parent = <&/mv64x60/pic>;
Index: linux-2.6/arch/powerpc/boot/serial.c
===================================================================
--- linux-2.6.orig/arch/powerpc/boot/serial.c
+++ linux-2.6/arch/powerpc/boot/serial.c
@@ -119,7 +119,7 @@ int serial_console_init(void)
if (dt_is_compatible(devp, "ns16550"))
rc = ns16550_console_init(devp, &serial_cd);
- else if (dt_is_compatible(devp, "marvell,mpsc"))
+ else if (dt_is_compatible(devp, "mrvl,mpsc"))
rc = mpsc_console_init(devp, &serial_cd);
else if (dt_is_compatible(devp, "fsl,cpm1-scc-uart") ||
dt_is_compatible(devp, "fsl,cpm1-smc-uart") ||
Index: linux-2.6/arch/powerpc/platforms/embedded6xx/prpmc2800.c
===================================================================
--- linux-2.6.orig/arch/powerpc/platforms/embedded6xx/prpmc2800.c
+++ linux-2.6/arch/powerpc/platforms/embedded6xx/prpmc2800.c
@@ -49,13 +49,13 @@ static void __init prpmc2800_setup_arch(
* ioremap mpp and gpp registers in case they are later
* needed by prpmc2800_reset_board().
*/
- np = of_find_compatible_node(NULL, NULL, "marvell,mv64x60-mpp");
+ np = of_find_compatible_node(NULL, NULL, "mrvl,mv64x60-mpp");
reg = of_get_property(np, "reg", NULL);
paddr = of_translate_address(np, reg);
of_node_put(np);
mv64x60_mpp_reg_base = ioremap(paddr, reg[1]);
- np = of_find_compatible_node(NULL, NULL, "marvell,mv64x60-gpp");
+ np = of_find_compatible_node(NULL, NULL, "mrvl,mv64x60-gpp");
reg = of_get_property(np, "reg", NULL);
paddr = of_translate_address(np, reg);
of_node_put(np);
Index: linux-2.6/arch/powerpc/sysdev/mv64x60_dev.c
===================================================================
--- linux-2.6.orig/arch/powerpc/sysdev/mv64x60_dev.c
+++ linux-2.6/arch/powerpc/sysdev/mv64x60_dev.c
@@ -446,22 +446,22 @@ static int __init mv64x60_device_setup(v
int err;
id = 0;
- for_each_compatible_node(np, "serial", "marvell,mpsc")
+ for_each_compatible_node(np, "serial", "mrvl,mpsc")
if ((err = mv64x60_mpsc_device_setup(np, id++)))
goto error;
id = 0;
- for_each_compatible_node(np, "network", "marvell,mv64x60-eth")
+ for_each_compatible_node(np, "network", "mrvl,mv64x60-eth")
if ((err = mv64x60_eth_device_setup(np, id++)))
goto error;
id = 0;
- for_each_compatible_node(np, "i2c", "marvell,mv64x60-i2c")
+ for_each_compatible_node(np, "i2c", "mrvl,mv64x60-i2c")
if ((err = mv64x60_i2c_device_setup(np, id++)))
goto error;
/* support up to one watchdog timer */
- np = of_find_compatible_node(np, NULL, "marvell,mv64x60-wdt");
+ np = of_find_compatible_node(np, NULL, "mrvl,mv64x60-wdt");
if (np) {
if ((err = mv64x60_wdt_device_setup(np, id)))
goto error;
@@ -489,7 +489,7 @@ static int __init mv64x60_add_mpsc_conso
if (!np)
goto not_mpsc;
- if (!of_device_is_compatible(np, "marvell,mpsc"))
+ if (!of_device_is_compatible(np, "mrvl,mpsc"))
goto not_mpsc;
prop = of_get_property(np, "block-index", NULL);
Index: linux-2.6/arch/powerpc/sysdev/mv64x60_pci.c
===================================================================
--- linux-2.6.orig/arch/powerpc/sysdev/mv64x60_pci.c
+++ linux-2.6/arch/powerpc/sysdev/mv64x60_pci.c
@@ -86,14 +86,14 @@ static int __init mv64x60_sysfs_init(voi
struct platform_device *pdev;
const unsigned int *prop;
- np = of_find_compatible_node(NULL, NULL, "marvell,mv64x60");
+ np = of_find_compatible_node(NULL, NULL, "mrvl,mv64x60");
if (!np)
return 0;
prop = of_get_property(np, "hs_reg_valid", NULL);
of_node_put(np);
- pdev = platform_device_register_simple("marvell,mv64x60", 0, NULL, 0);
+ pdev = platform_device_register_simple("mrvl,mv64x60", 0, NULL, 0);
if (IS_ERR(pdev))
return PTR_ERR(pdev);
@@ -166,6 +166,6 @@ void __init mv64x60_pci_init(void)
{
struct device_node *np;
- for_each_compatible_node(np, "pci", "marvell,mv64x60-pci")
+ for_each_compatible_node(np, "pci", "mrvl,mv64x60-pci")
mv64x60_add_bridge(np);
}
Index: linux-2.6/arch/powerpc/sysdev/mv64x60_pic.c
===================================================================
--- linux-2.6.orig/arch/powerpc/sysdev/mv64x60_pic.c
+++ linux-2.6/arch/powerpc/sysdev/mv64x60_pic.c
@@ -238,13 +238,13 @@ void __init mv64x60_init_irq(void)
const unsigned int *reg;
unsigned long flags;
- np = of_find_compatible_node(NULL, NULL, "marvell,mv64x60-gpp");
+ np = of_find_compatible_node(NULL, NULL, "mrvl,mv64x60-gpp");
reg = of_get_property(np, "reg", &size);
paddr = of_translate_address(np, reg);
mv64x60_gpp_reg_base = ioremap(paddr, reg[1]);
of_node_put(np);
- np = of_find_compatible_node(NULL, NULL, "marvell,mv64x60-pic");
+ np = of_find_compatible_node(NULL, NULL, "mrvl,mv64x60-pic");
reg = of_get_property(np, "reg", &size);
paddr = of_translate_address(np, reg);
mv64x60_irq_reg_base = ioremap(paddr, reg[1]);
Index: linux-2.6/arch/powerpc/sysdev/mv64x60_udbg.c
===================================================================
--- linux-2.6.orig/arch/powerpc/sysdev/mv64x60_udbg.c
+++ linux-2.6/arch/powerpc/sysdev/mv64x60_udbg.c
@@ -85,7 +85,7 @@ static void mv64x60_udbg_init(void)
if (!stdout)
return;
- for_each_compatible_node(np, "serial", "marvell,mpsc") {
+ for_each_compatible_node(np, "serial", "mrvl,mpsc") {
if (np == stdout)
break;
}
next prev parent reply other threads:[~2008-03-28 23:42 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-03-28 23:39 [PATCH 0/9] powerpc: mv64x60 and prpmc2800 DTS cleanups Dale Farnsworth
2008-03-28 23:42 ` Dale Farnsworth [this message]
2008-03-28 23:47 ` [PATCH 1/9] [POWERPC] mv64x60: change FDT compatible prefix to mrvl Grant Likely
2008-03-29 0:00 ` Dale Farnsworth
2008-03-29 0:12 ` Grant Likely
2008-03-30 23:44 ` David Gibson
2008-03-31 16:56 ` Dale Farnsworth
2008-04-01 1:53 ` David Gibson
2008-03-28 23:44 ` [PATCH 2/9] [POWERPC] prpmc2800: convert DTS to v1 and add labels Dale Farnsworth
2008-03-28 23:45 ` [PATCH 3/9] [POWERPC] prpmc2800: fix frequencies in prpmc2800.dts Dale Farnsworth
2008-03-28 23:47 ` [PATCH 4/9] [POWERPC] mv64x60: Fix FDT compatible names: mv64x60 => mv64360 Dale Farnsworth
2008-03-29 21:57 ` Olof Johansson
2008-03-30 19:20 ` Segher Boessenkool
2008-03-31 16:33 ` Dale Farnsworth
2008-03-28 23:48 ` [PATCH 5/9] [POWERPC] mv64x60: remove device tree absolute path references Dale Farnsworth
2008-03-28 23:49 ` [PATCH 6/9] [POWERPC] prpmc2800: clean up dts properties Dale Farnsworth
2008-03-29 21:59 ` Olof Johansson
2008-03-30 10:11 ` David Gibson
2008-03-31 16:43 ` Dale Farnsworth
2008-04-01 1:17 ` Segher Boessenkool
2008-04-01 2:22 ` David Gibson
2008-03-28 23:50 ` [PATCH 7/9] [POWERPC] mv643xx_eth: prepare to support multiple silicon blocks Dale Farnsworth
2008-03-28 23:51 ` [PATCH 8/9] [POWERPC] Document the mv64x60 device tree bindings Dale Farnsworth
2008-03-28 23:52 ` [PATCH 9/9] [POWERPC] prpmc2800 needs a dtbImage Dale Farnsworth
2008-03-28 23:56 ` Grant Likely
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080328234241.GA30214@farnsworth.org \
--to=dale@farnsworth.org \
--cc=linuxppc-dev@ozlabs.org \
--cc=paulus@samba.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.