From: Len Brown <lenb@kernel.org>
To: linux-acpi@vger.kernel.org, "Moore,
Robert" <robert.moore@intel.com>,
Alexey Starikovskiy <astarikovskiy@suse.de>
Subject: Re: ACPICA branch - first try Core revision 20080321
Date: Sat, 12 Apr 2008 00:41:31 -0400 [thread overview]
Message-ID: <200804120041.31583.lenb@kernel.org> (raw)
In-Reply-To: <1207974356-30687-1-git-send-email-lenb@kernel.org>
[-- Attachment #1: Type: text/plain, Size: 8446 bytes --]
The acpica branch is based on 2.6.25-rc9.
Below is a dmesg diff of an HP nx6325 booting that baseline
vs. booting the acpica branch.
Two things jump out:
1. ACPI: Expecting a [Reference] package element, found type 14
2. memory coorruption:
slab error in verify_redzone_free(): cache `size-1024': memory outside object was overwritten
-Len
1c1
< Linux version 2.6.25-rc9 (lenb@t61) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #50 SMP Fri Apr 11 22:46:39 EDT 2008
---
> Linux version 2.6.25-rc9-00073-g8b56e6a (lenb@t61) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #33 SMP Sat Apr 12 00:07:51 EDT 2008
40c40
< early res: 2 [200000-8d9707] TEXT DATA BSS
---
> early res: 2 [200000-8d9747] TEXT DATA BSS
95a96
> spurious 8259A interrupt: IRQ7.
102c103
< Memory: 442500k/458560k available (3629k kernel code, 15672k reserved, 2023k data, 364k init)
---
> Memory: 442500k/458560k available (3632k kernel code, 15672k reserved, 2020k data, 364k init)
104c105
< Calibrating delay using timer specific routine.. 3194.17 BogoMIPS (lpj=1597086)
---
> Calibrating delay using timer specific routine.. 3194.25 BogoMIPS (lpj=1597129)
113c114
< ACPI: Core revision 20070126
---
> ACPI: Core revision 20080321
126c127
< Calibrating delay using timer specific routine.. 3191.63 BogoMIPS (lpj=1595818)
---
> Calibrating delay using timer specific routine.. 3191.59 BogoMIPS (lpj=1595798)
154,155c155,156
< Completing Region/Field/Buffer/Package initialization:................................................................................................................................................................
< Initialized 29/33 Regions 0/0 Fields 63/64 Buffers 68/78 Packages (1172 nodes)
---
> Completing Region/Field/Buffer/Package initialization:...............................................................................................................................................................
> Initialized 29/33 Regions 0/0 Fields 63/64 Buffers 67/78 Packages (1172 nodes)
160a162,168
> ACPI: Expecting a [Reference] package element, found type 14
> ACPI: Expecting a [Reference] package element, found type 14
> ACPI: Expecting a [Reference] package element, found type 14
> ACPI: Expecting a [Reference] package element, found type 14
> ACPI: Expecting a [Reference] package element, found type 14
> ACPI: Expecting a [Reference] package element, found type 14
> ACPI: Expecting a [Reference] package element, found type 14
228d235
< PCI: Bridge: 0000:00:05.0
232a240
> PCI: Bridge: 0000:00:05.0
381c389
< usb usb1: Manufacturer: Linux 2.6.25-rc9 ehci_hcd
---
> usb usb1: Manufacturer: Linux 2.6.25-rc9-00073-g8b56e6a ehci_hcd
394c402
< usb usb2: Manufacturer: Linux 2.6.25-rc9 ohci_hcd
---
> usb usb2: Manufacturer: Linux 2.6.25-rc9-00073-g8b56e6a ohci_hcd
406c414
< usb usb3: Manufacturer: Linux 2.6.25-rc9 ohci_hcd
---
> usb usb3: Manufacturer: Linux 2.6.25-rc9-00073-g8b56e6a ohci_hcd
448a457,463
> ACPI: Expecting a [Reference] package element, found type 14
> ACPI: Expecting a [Reference] package element, found type 14
> ACPI: LNXTHERM:01 is registered as thermal_zone0
> ACPI: Thermal Zone [TZ1] (67 C)
> ACPI: Expecting a [Reference] package element, found type 14
> ACPI: LNXTHERM:02 is registered as thermal_zone1
> ACPI: Thermal Zone [TZ2] (54 C)
452d466
< ACPI: AC Adapter [C1BD] (on-line)
459a474,477
> ACPI: AC Adapter [C1BD] (on-line)
> ACPI: Expecting a [Reference] package element, found type 14
> ACPI: LNXTHERM:03 is registered as thermal_zone2
> ACPI: Thermal Zone [TZ3] (29 C)
461a480,487
> ACPI: PNP0C0B:00 is registered as cooling_device2
> ACPI: Fan [C34F] (off)
> ACPI: PNP0C0B:01 is registered as cooling_device3
> ACPI: Fan [C350] (off)
> ACPI: PNP0C0B:02 is registered as cooling_device4
> ACPI: Fan [C351] (off)
> ACPI: PNP0C0B:03 is registered as cooling_device5
> ACPI: Fan [C352] (off)
471a498
> ACPI: WMI: Mapper loaded
481c508
< power_supply C1BF: prop VOLTAGE_NOW=12617000
---
> power_supply C1BF: prop VOLTAGE_NOW=12616000
490,507d516
< ACPI: WMI: Mapper loaded
< ACPI: LNXTHERM:01 is registered as thermal_zone0
< ACPI: Thermal Zone [TZ1] (54 C)
< ACPI: LNXTHERM:02 is registered as thermal_zone1
< ACPI: Thermal Zone [TZ2] (46 C)
< ACPI: LNXTHERM:03 is registered as thermal_zone2
< ACPI: Thermal Zone [TZ3] (28 C)
< ACPI: Transitioning device [C34F] to D3
< ACPI: PNP0C0B:00 is registered as cooling_device2
< ACPI: Fan [C34F] (off)
< ACPI: Transitioning device [C350] to D3
< ACPI: PNP0C0B:01 is registered as cooling_device3
< ACPI: Fan [C350] (off)
< ACPI: Transitioning device [C351] to D3
< ACPI: PNP0C0B:02 is registered as cooling_device4
< ACPI: Fan [C351] (off)
< ACPI: PNP0C0B:03 is registered as cooling_device5
< ACPI: Fan [C352] (on)
524c533
< Clocksource tsc unstable (delta = -245722066 ns)
---
> Clocksource tsc unstable (delta = -249928054 ns)
527a537,600
> ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 17 (level, low) -> IRQ 17
> slab error in verify_redzone_free(): cache `size-1024': memory outside object was overwritten
> Pid: 96, comm: kacpi_notify Not tainted 2.6.25-rc9-00073-g8b56e6a #33
>
> Call Trace:
> [<ffffffff8027f57b>] __slab_error+0x24/0x26
> [<ffffffff8027fb72>] cache_free_debugcheck+0x136/0x207
> [<ffffffff8037f2bc>] ? acpi_ev_asynch_enable_gpe+0x2b/0x2f
> [<ffffffff80281afb>] kfree+0x9c/0x216
> [<ffffffff80375e86>] ? acpi_os_execute_deferred+0x0/0x39
> [<ffffffff8037f2bc>] acpi_ev_asynch_enable_gpe+0x2b/0x2f
> [<ffffffff80375eb2>] acpi_os_execute_deferred+0x2c/0x39
> [<ffffffff8023f480>] run_workqueue+0x7d/0x106
> [<ffffffff8023fe41>] worker_thread+0xd8/0xe5
> [<ffffffff80242913>] ? autoremove_wake_function+0x0/0x38
> [<ffffffff8023fd69>] ? worker_thread+0x0/0xe5
> [<ffffffff802427d4>] kthread+0x49/0x79
> [<ffffffff8020bef8>] child_rip+0xa/0x12
> [<ffffffff8024278b>] ? kthread+0x0/0x79
> [<ffffffff8020beee>] ? child_rip+0x0/0x12
>
> ffff81001b028e70: redzone 1:0x800, redzone 2:0x5a5a5a5a5a5a5a5a.
> ------------[ cut here ]------------
> kernel BUG at mm/slab.c:2906!
> invalid opcode: 0000 [1] SMP
> CPU 0
> Modules linked in: powernow_k8 pcmcia snd_hda_intel snd_seq_device snd_pcm_oss snd_mixer_oss snd_pcm snd_timer yenta_socket rsrc_nonstatic snd_page_alloc wmi battery fan video backlight ac thermal
> Pid: 96, comm: kacpi_notify Not tainted 2.6.25-rc9-00073-g8b56e6a #33
> RIP: 0010:[<ffffffff8027fc0c>] [<ffffffff8027fc0c>] cache_free_debugcheck+0x1d0/0x207
> RSP: 0018:ffff81001b037df0 EFLAGS: 00010016
> RAX: ffff81001b028d98 RBX: ffff81001b804ac0 RCX: ffff81001b028150
> RDX: 0000000000000003 RSI: ffff81001b028e70 RDI: ffff81001b804ac0
> RBP: ffff81001b037e20 R08: 09f911029d74e35b R09: 00000000ffffff20
> R10: 0000000000000010 R11: 0000000000000000 R12: 0000000000000800
> R13: ffff81001b028e70 R14: 5a5a5a5a5a5a5a5a R15: ffff81001b028100
> FS: 00000000409b4950(0000) GS:ffffffff80786000(0000) knlGS:0000000000000000
> CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
> CR2: 00000030ed8c6d80 CR3: 0000000019c38000 CR4: 00000000000006e0
> DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
> Process kacpi_notify (pid: 96, threadinfo ffff81001b036000, task ffff81001bb06740)
> Stack: ffffffff8037f2bc ffff81001b80b5e8 ffff81001b804ac0 ffff81001b028e78
> ffffffff807f3bc0 0000000000000282 ffff81001b037e70 ffffffff80281afb
> ffffffff807f3bc0 0000000000008025 ffff81001b028e78 ffff81001b028e78
> Call Trace:
> [<ffffffff8037f2bc>] ? acpi_ev_asynch_enable_gpe+0x2b/0x2f
> [<ffffffff80281afb>] kfree+0x9c/0x216
> [<ffffffff80375e86>] ? acpi_os_execute_deferred+0x0/0x39
> [<ffffffff8037f2bc>] acpi_ev_asynch_enable_gpe+0x2b/0x2f
> [<ffffffff80375eb2>] acpi_os_execute_deferred+0x2c/0x39
> [<ffffffff8023f480>] run_workqueue+0x7d/0x106
> [<ffffffff8023fe41>] worker_thread+0xd8/0xe5
> [<ffffffff80242913>] ? autoremove_wake_function+0x0/0x38
> [<ffffffff8023fd69>] ? worker_thread+0x0/0xe5
> [<ffffffff802427d4>] kthread+0x49/0x79
> [<ffffffff8020bef8>] child_rip+0xa/0x12
> [<ffffffff8024278b>] ? kthread+0x0/0x79
> [<ffffffff8020beee>] ? child_rip+0x0/0x12
>
>
> Code: 29 c8 48 0f af c2 48 89 c2 48 c1 ea 20 3b 93 18 01 00 00 72 04 0f 0b eb fe 89 d0 0f af 83 0c 01 00 00 48 8d 04 01 49 39 c5 74 04 <0f> 0b eb fe 89 d0 41 c7 44 87 30 fe ff ff ff f6 83 15 01 00 00
> RIP [<ffffffff8027fc0c>] cache_free_debugcheck+0x1d0/0x207
> RSP <ffff81001b037df0>
> ---[ end trace b34da6ee0b4cc39e ]---
[-- Attachment #2: dmesg-2.6.25-rc9-00073-g8b56e6a --]
[-- Type: text/plain, Size: 29060 bytes --]
Linux version 2.6.25-rc9-00073-g8b56e6a (lenb@t61) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #33 SMP Sat Apr 12 00:07:51 EDT 2008
Command line: root=/dev/sda3 debug
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001bfd0000 (usable)
BIOS-e820: 000000001bfd0000 - 000000001bfe5600 (reserved)
BIOS-e820: 000000001bfe5600 - 000000001bff8000 (ACPI NVS)
BIOS-e820: 000000001bff8000 - 0000000020000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec02000 (reserved)
BIOS-e820: 00000000ffbc0000 - 00000000ffcc0000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
Entering add_active_range(0, 0, 159) 0 entries of 3200 used
Entering add_active_range(0, 256, 114640) 1 entries of 3200 used
end_pfn_map = 1048576
DMI 2.4 present.
ACPI: RSDP 000F7D30, 0024 (r2 HP )
ACPI: XSDT 1BFE57B4, 0054 (r1 HP 0944 6070620 HP 1)
ACPI: FACP 1BFE5684, 00F4 (r4 HP 0944 3 HP 1)
ACPI: DSDT 1BFE58DC, EE7A (r1 HP SB400 10000 MSFT 100000E)
ACPI: FACS 1BFF7E80, 0040
ACPI: APIC 1BFE5808, 0062 (r1 HP 0944 1 HP 1)
ACPI: MCFG 1BFE586C, 003C (r1 HP 0944 1 HP 1)
ACPI: TCPA 1BFE58A8, 0032 (r2 HP 0944 1 HP 1)
ACPI: SSDT 1BFF4756, 0059 (r1 HP HPQNLP 1 MSFT 100000E)
ACPI: SSDT 1BFF47AF, 0182 (r1 HP PSSTBLID 1 HP 1)
ACPI: DMI detected: Hewlett-Packard
Scanning NUMA topology in Northbridge 24
No NUMA configuration found
Faking a node at 0000000000000000-000000001bfd0000
Entering add_active_range(0, 0, 159) 0 entries of 3200 used
Entering add_active_range(0, 256, 114640) 1 entries of 3200 used
Bootmem setup node 0 0000000000000000-000000001bfd0000
NODE_DATA [000000000000b000 - 0000000000011fff]
bootmap [0000000000012000 - 00000000000157ff] pages 4
early res: 0 [0-fff] BIOS data page
early res: 1 [6000-7fff] SMP_TRAMPOLINE
early res: 2 [200000-8d9747] TEXT DATA BSS
early res: 3 [9fc00-a0bff] EBDA
early res: 4 [8000-afff] PGTABLE
No mptable found.
[ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0
[ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0
[ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0
[ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0
Zone PFN ranges:
DMA 0 -> 4096
DMA32 4096 -> 1048576
Normal 1048576 -> 1048576
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0 -> 159
0: 256 -> 114640
On node 0 totalpages: 114543
DMA zone: 56 pages used for memmap
DMA zone: 1760 pages reserved
DMA zone: 2183 pages, LIFO batch:0
DMA32 zone: 1511 pages used for memmap
DMA32 zone: 109033 pages, LIFO batch:31
Normal zone: 0 pages used for memmap
Movable zone: 0 pages used for memmap
ATI board detected. Disabling timer routing over 8254.
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x8008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
Setting APIC routing to flat
Using ACPI (MADT) for SMP configuration information
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at 30000000 (gap: 20000000:c0000000)
SMP: Allowing 2 CPUs, 0 hotplug CPUs
PERCPU: Allocating 35648 bytes of per cpu data
Built 1 zonelists in Node order, mobility grouping on. Total pages: 111216
Policy zone: DMA32
Kernel command line: root=/dev/sda3 debug
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 16384 bytes)
Extended CMOS year: 2000
TSC calibrated against PM_TIMER
Marking TSC unstable due to TSCs unsynchronized
time.c: Detected 1595.999 MHz processor.
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
Checking aperture...
Node 0: aperture @ 9494000000 size 32 MB
Aperture beyond 4GB. Ignoring.
No AGP bridge found
Memory: 442500k/458560k available (3632k kernel code, 15672k reserved, 2020k data, 364k init)
CPA: page pool initialized 1 of 1 pages preallocated
Calibrating delay using timer specific routine.. 3194.25 BogoMIPS (lpj=1597129)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU 0/0 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ACPI: Core revision 20080321
Parsing all Control Methods:
Table [DSDT](id 0001) - 1153 Objects with 113 Devices 337 Methods 33 Regions
Parsing all Control Methods:
Table [SSDT](id 0002) - 2 Objects with 0 Devices 2 Methods 0 Regions
Parsing all Control Methods:
Table [SSDT](id 0003) - 8 Objects with 0 Devices 0 Methods 0 Regions
tbxface-0598 [00] tb_load_namespace : ACPI Tables successfully acquired
evxfevnt-0091 [00] enable : Transition to ACPI mode successful
..MP-BIOS bug: 8254 timer not connected to IO-APIC
Disabling APIC timer
Booting processor 1/2 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 3191.59 BogoMIPS (lpj=1595798)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU 1/1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
AMD Turion(tm) 64 X2 Mobile Technology TL-50 stepping 02
Brought up 2 CPUs
CPU0 attaching sched-domain:
domain 0: span 00000003
groups: 00000001 00000002
domain 1: span 00000003
groups: 00000003
CPU1 attaching sched-domain:
domain 0: span 00000003
groups: 00000002 00000001
domain 1: span 00000003
groups: 00000003
net_namespace: 296 bytes
NET: Registered protocol family 16
No dock devices found.
ACPI: bus type pci registered
PCI: Using MMCONFIG at e0000000 - efffffff
PCI: Using configuration type 1
evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x15
evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 3 Wake, Enabled 11 Runtime GPEs in this block
ACPI: EC: Look up EC in DSDT
ACPI: EC: non-query interrupt received, switching to interrupt mode
Completing Region/Field/Buffer/Package initialization:...............................................................................................................................................................
Initialized 29/33 Regions 0/0 Fields 63/64 Buffers 67/78 Packages (1172 nodes)
Initializing Device/Processor/Thermal objects by executing _INI methods:.......
Executed 7 _INI methods requiring 2 _STA executions (examined 120 objects)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: Expecting a [Reference] package element, found type 14
ACPI: Expecting a [Reference] package element, found type 14
ACPI: Expecting a [Reference] package element, found type 14
ACPI: Expecting a [Reference] package element, found type 14
ACPI: Expecting a [Reference] package element, found type 14
ACPI: Expecting a [Reference] package element, found type 14
ACPI: Expecting a [Reference] package element, found type 14
ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: PCI Root Bridge [C074] (0000:00)
PCI: Transparent bridge - 0000:00:14.4
ACPI: PCI Interrupt Routing Table [\_SB_.C074._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C074.C075._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C074.C0DF._PRT]
ACPI: PCI Interrupt Link [C125] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [C126] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [C127] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [C128] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [C129] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [C12A] (IRQs 9) *0, disabled.
ACPI: PCI Interrupt Link [C12B] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [C12C] (IRQs *10 11)
ACPI: Power Resource [C223] (off)
ACPI: Power Resource [C1FE] (off)
ACPI: Power Resource [C217] (on)
ACPI: Power Resource [C34B] (off)
ACPI: Power Resource [C34C] (off)
ACPI: Power Resource [C34D] (off)
ACPI: Power Resource [C34E] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Cannot allocate resource region 0 of device 0000:00:14.2
DMAR:parse DMAR table failure.
system 00:00: iomem range 0x0-0x9ffff could not be reserved
system 00:00: iomem range 0xe0000-0xfffff could not be reserved
system 00:00: iomem range 0x100000-0x1bffffff could not be reserved
system 00:0a: ioport range 0x40b-0x40b has been reserved
system 00:0a: ioport range 0x4d0-0x4d1 has been reserved
system 00:0a: ioport range 0x4d6-0x4d6 has been reserved
system 00:0a: ioport range 0x500-0x51f has been reserved
system 00:0a: ioport range 0xc00-0xc01 has been reserved
system 00:0a: ioport range 0xc14-0xc14 has been reserved
system 00:0a: ioport range 0xc50-0xc51 has been reserved
system 00:0a: ioport range 0xc52-0xc52 has been reserved
system 00:0a: ioport range 0xc6c-0xc6c has been reserved
system 00:0a: ioport range 0xc6f-0xc6f has been reserved
system 00:0a: ioport range 0xcd4-0xcdf has been reserved
system 00:0a: iomem range 0xffb00000-0xffbfffff could not be reserved
system 00:0a: iomem range 0xfff00000-0xffffffff could not be reserved
system 00:0b: ioport range 0x8000-0x802f has been reserved
system 00:0b: ioport range 0x8100-0x811f has been reserved
system 00:0b: iomem range 0xe0000000-0xefffffff could not be reserved
system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:0c: iomem range 0xcf000-0xcffff has been reserved
system 00:0c: iomem range 0x1c000000-0x1fffffff could not be reserved
system 00:0c: iomem range 0xfee00000-0xfee00fff could not be reserved
PCI: Bridge: 0000:00:01.0
IO window: 6000-6fff
MEM window: 0xd0300000-0xd03fffff
PREFETCH window: 0x00000000c0000000-0x00000000c3ffffff
PCI: Bridge: 0000:00:04.0
IO window: 4000-5fff
MEM window: 0xcc000000-0xcfffffff
PREFETCH window: disabled.
Clockevents: could not switch to one-shot mode: lapic is not functional.
Could not switch to high resolution mode on CPU 0
Clockevents: could not switch to one-shot mode: lapic is not functional.
Could not switch to high resolution mode on CPU 1
PCI: Bridge: 0000:00:05.0
IO window: 2000-3fff
MEM window: 0xc8000000-0xcbffffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:06.0
IO window: disabled.
MEM window: 0xc4000000-0xc40fffff
PREFETCH window: disabled.
PCI: Bus 3, cardbus bridge: 0000:02:04.0
IO window: 0x00001000-0x000010ff
IO window: 0x00001400-0x000014ff
PREFETCH window: 0x30000000-0x33ffffff
MEM window: 0x38000000-0x3bffffff
PCI: Bridge: 0000:00:14.4
IO window: 1000-1fff
MEM window: 0xd0000000-0xd02fffff
PREFETCH window: 0x0000000030000000-0x0000000033ffffff
PCI: Setting latency timer of device 0000:00:04.0 to 64
PCI: Setting latency timer of device 0000:00:05.0 to 64
PCI: Setting latency timer of device 0000:00:06.0 to 64
ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 20 (level, low) -> IRQ 20
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 3, 32768 bytes)
TCP established hash table entries: 16384 (order: 6, 262144 bytes)
TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
Total HugeTLB memory allocated, 0
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:00.0: MSI quirk detected; MSI disabled
pci 0000:01:05.0: Boot video device
PCI: Setting latency timer of device 0000:00:04.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:04.0:pcie00]
Allocate Port Service[0000:00:04.0:pcie01]
Allocate Port Service[0000:00:04.0:pcie03]
PCI: Setting latency timer of device 0000:00:05.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:05.0:pcie00]
Allocate Port Service[0000:00:05.0:pcie01]
Allocate Port Service[0000:00:05.0:pcie03]
PCI: Setting latency timer of device 0000:00:06.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:06.0:pcie00]
Allocate Port Service[0000:00:06.0:pcie01]
Allocate Port Service[0000:00:06.0:pcie03]
AER service couldn't init device 0000:00:04.0:pcie01 - no _OSC support
AER service couldn't init device 0000:00:05.0:pcie01 - no _OSC support
AER service couldn't init device 0000:00:06.0:pcie01 - no _OSC support
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Sleep Button (CM) as /class/input/input1
ACPI: Sleep Button (CM) [C25A]
input: Lid Switch as /class/input/input2
ACPI: Lid Switch [C25B]
ACPI: ACPI0007:00 is registered as cooling_device0
ACPI: Processor [C000] (supports 8 throttling states)
ACPI: ACPI0007:01 is registered as cooling_device1
ACPI: Processor [C001] (supports 8 throttling states)
Real Time Clock Driver v1.12ac
Linux agpgart interface v0.103
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
Floppy drive(s): fd0 is 1.44M
Clockevents: could not switch to one-shot mode:<6>Clockevents: could not switch to one-shot mode: lapic is not functional.
Could not switch to high resolution mode on CPU 1
lapic is not functional.
Could not switch to high resolution mode on CPU 0
floppy0: no floppy controllers found
brd: module loaded
loop: module loaded
Intel(R) PRO/1000 Network Driver - version 7.3.20-k2
Copyright (c) 1999-2006 Intel Corporation.
e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
tg3.c:v3.89 (April 03, 2008)
ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 23 (level, low) -> IRQ 23
eth0: Tigon3 [partno(BCM95788A50) rev 3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000Base-T Ethernet 00:17:08:30:e4:ee
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1]
eth0: dma_rwctrl[763f0000] dma_mask[32-bit]
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
console [netcon0] enabled
netconsole: network logging started
Uniform Multi-Platform E-IDE driver
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ATIIXP: IDE controller (0x1002:0x4376 rev 0x80) at PCI slot 0000:00:14.1
ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16
ATIIXP: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x7040-0x7047, BIOS settings: hda:DMA, hdb:PIO
ATIIXP: simplex device: DMA disabled
ide1: ATIIXP Bus-Master DMA disabled (BIOS)
Probing IDE interface ide0...
hda: TSSTcorpCDW/DVD TS-L462C, ATAPI CD/DVD-ROM drive
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: MWDMA2 mode selected
Probing IDE interface ide1...
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hda: ATAPI 24X DVD-ROM CD-R/RW drive, 1536kB Cache
Uniform CD-ROM driver Revision: 3.20
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.03.16-rc1 Thu. Nov. 07 10:09:32 PDT 2007
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
sata_sil 0000:00:12.0: version 2.3
ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 16 (level, low) -> IRQ 16
scsi0 : sata_sil
scsi1 : sata_sil
ata1: SATA max UDMA/100 mmio m512@0xd0409000 tf 0xd0409080 irq 16
ata2: SATA max UDMA/100 mmio m512@0xd0409000 tf 0xd04090c0 irq 16
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-7: FUJITSU MHT2040BH, 0000104A, max UDMA/100
ata1.00: 78140160 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/100
ata2: SATA link down (SStatus 0 SControl 300)
scsi 0:0:0:0: Direct-Access ATA FUJITSU MHT2040B 0000 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors (40008 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors (40008 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
Fusion MPT base driver 3.04.06
Copyright (c) 1999-2007 LSI Corporation
Fusion MPT SPI Host driver 3.04.06
Fusion MPT SAS Host driver 3.04.06
ACPI: PCI Interrupt 0000:02:04.1[A] -> GSI 20 (level, low) -> IRQ 20
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[d0011000-d00117ff] Max Packet=[2048] IR/IT contexts=[4/8]
ieee1394: raw1394: /dev/raw1394 device initialized
ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:13.2: irq 19, io mem 0xd0403000
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.25-rc9-00073-g8b56e6a ehci_hcd
usb usb1: SerialNumber: 0000:00:13.2
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 19
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:13.0: irq 19, io mem 0xd0401000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.25-rc9-00073-g8b56e6a ohci_hcd
usb usb2: SerialNumber: 0000:00:13.0
ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 19
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:13.1: irq 19, io mem 0xd0402000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.25-rc9-00073-g8b56e6a ohci_hcd
usb usb3: SerialNumber: 0000:00:13.1
USB Universal Host Controller Interface driver v3.0
usb 3-1: new full speed USB device using ohci_hcd and address 2
usb 3-1: configuration #1 chosen from 1 choice
usb 3-1: New USB device found, idVendor=08ff, idProduct=2580
usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 3-1: Product: Fingerprint Sensor
usbcore: registered new interface driver usblp
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
PNP: PS/2 Controller [PNP0303:C214,PNP0f13:C215] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input3
device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
Advanced Linux Sound Architecture Driver Version 1.0.16rc2 (Thu Jan 31 16:40:16 2008 UTC).
ALSA device list:
No soundcards found.
oprofile: using NMI interrupt.
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04793/0x300000
serio: Synaptics pass-through port at isa0060/serio4/input0
input: SynPS/2 Synaptics TouchPad as /class/input/input4
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 364k freed
ACPI: Expecting a [Reference] package element, found type 14
ACPI: Expecting a [Reference] package element, found type 14
ACPI: LNXTHERM:01 is registered as thermal_zone0
ACPI: Thermal Zone [TZ1] (67 C)
ACPI: Expecting a [Reference] package element, found type 14
ACPI: LNXTHERM:02 is registered as thermal_zone1
ACPI: Thermal Zone [TZ2] (54 C)
power_supply C1BD: uevent
power_supply C1BD: No power supply yet
power_supply C1BD: power_supply_changed
power_supply C1BD: power_supply_changed_work
power_supply C1BD: power_supply_update_gen_leds 1
power_supply C1BD: uevent
power_supply C1BD: POWER_SUPPLY_NAME=C1BD
power_supply C1BD: Static prop TYPE=Mains
power_supply C1BD: 1 dynamic props
power_supply C1BD: prop ONLINE=1
ACPI: AC Adapter [C1BD] (on-line)
ACPI: Expecting a [Reference] package element, found type 14
ACPI: LNXTHERM:03 is registered as thermal_zone2
ACPI: Thermal Zone [TZ3] (29 C)
input: Video Bus as /class/input/input5
ACPI: Video Device [C076] (multi-head: yes rom: no post: no)
ACPI: PNP0C0B:00 is registered as cooling_device2
ACPI: Fan [C34F] (off)
ACPI: PNP0C0B:01 is registered as cooling_device3
ACPI: Fan [C350] (off)
ACPI: PNP0C0B:02 is registered as cooling_device4
ACPI: Fan [C351] (off)
ACPI: PNP0C0B:03 is registered as cooling_device5
ACPI: Fan [C352] (off)
power_supply C1BF: uevent
power_supply C1BF: No power supply yet
power_supply C1BF: power_supply_changed
power_supply C1BF: power_supply_changed_work
Yenta: CardBus bridge found at 0000:02:04.0 [103c:30b0]
Yenta: Enabling burst memory read transactions
Yenta: Using INTVAL to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:02:04.0, mfunc 0x01a11002, devctl 0x64
ACPI: Battery Slot [C1BF] (battery present)
ACPI: WMI: Mapper loaded
power_supply C1BF: power_supply_update_bat_leds 4
power_supply C1BF: uevent
power_supply C1BF: POWER_SUPPLY_NAME=C1BF
power_supply C1BF: Static prop TYPE=Battery
power_supply C1BF: 12 dynamic props
power_supply C1BF: prop STATUS=Full
power_supply C1BF: prop PRESENT=1
power_supply C1BF: prop TECHNOLOGY=Li-ion
power_supply C1BF: prop VOLTAGE_MIN_DESIGN=10800000
power_supply C1BF: prop VOLTAGE_NOW=12616000
power_supply C1BF: prop CURRENT_NOW=0
power_supply C1BF: prop CHARGE_FULL_DESIGN=4679000
power_supply C1BF: prop CHARGE_FULL=4679000
power_supply C1BF: prop CHARGE_NOW=4679000
power_supply C1BF: prop MODEL_NAME=Primary
power_supply C1BF: prop MANUFACTURER=Hewlett-Packard
power_supply C1BF: prop SERIAL_NUMBER=39279 2006/08/07
ACPI: Battery Slot [C1BE] (battery absent)
ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16
Yenta: ISA IRQ mask 0x0ef8, PCI irq 20
Socket status: 30000006
Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06
pcmcia: parent PCI bridge I/O window: 0x1000 - 0x1fff
pcmcia: parent PCI bridge Memory window: 0xd0000000 - 0xd02fffff
pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x33ffffff
EXT3 FS on sda3, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 2096472k swap on /dev/sda2. Priority:-1 extents:1 across:2096472k
warning: process `kudzu' used the deprecated sysctl system call with 1.23.
powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-50 processors (2 cpu cores) (version 2.20.00)
powernow-k8: 0 : fid 0x8 (1600 MHz), vid 0x13
powernow-k8: 1 : fid 0x0 (800 MHz), vid 0x1e
Clocksource tsc unstable (delta = -249928054 ns)
tg3: eth1: Link is up at 1000 Mbps, full duplex.
tg3: eth1: Flow control is on for TX and on for RX.
warning: `dbus-daemon' uses 32-bit capabilities (legacy support in use)
ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 17 (level, low) -> IRQ 17
slab error in verify_redzone_free(): cache `size-1024': memory outside object was overwritten
Pid: 96, comm: kacpi_notify Not tainted 2.6.25-rc9-00073-g8b56e6a #33
Call Trace:
[<ffffffff8027f57b>] __slab_error+0x24/0x26
[<ffffffff8027fb72>] cache_free_debugcheck+0x136/0x207
[<ffffffff8037f2bc>] ? acpi_ev_asynch_enable_gpe+0x2b/0x2f
[<ffffffff80281afb>] kfree+0x9c/0x216
[<ffffffff80375e86>] ? acpi_os_execute_deferred+0x0/0x39
[<ffffffff8037f2bc>] acpi_ev_asynch_enable_gpe+0x2b/0x2f
[<ffffffff80375eb2>] acpi_os_execute_deferred+0x2c/0x39
[<ffffffff8023f480>] run_workqueue+0x7d/0x106
[<ffffffff8023fe41>] worker_thread+0xd8/0xe5
[<ffffffff80242913>] ? autoremove_wake_function+0x0/0x38
[<ffffffff8023fd69>] ? worker_thread+0x0/0xe5
[<ffffffff802427d4>] kthread+0x49/0x79
[<ffffffff8020bef8>] child_rip+0xa/0x12
[<ffffffff8024278b>] ? kthread+0x0/0x79
[<ffffffff8020beee>] ? child_rip+0x0/0x12
ffff81001b028e70: redzone 1:0x800, redzone 2:0x5a5a5a5a5a5a5a5a.
------------[ cut here ]------------
kernel BUG at mm/slab.c:2906!
invalid opcode: 0000 [1] SMP
CPU 0
Modules linked in: powernow_k8 pcmcia snd_hda_intel snd_seq_device snd_pcm_oss snd_mixer_oss snd_pcm snd_timer yenta_socket rsrc_nonstatic snd_page_alloc wmi battery fan video backlight ac thermal
Pid: 96, comm: kacpi_notify Not tainted 2.6.25-rc9-00073-g8b56e6a #33
RIP: 0010:[<ffffffff8027fc0c>] [<ffffffff8027fc0c>] cache_free_debugcheck+0x1d0/0x207
RSP: 0018:ffff81001b037df0 EFLAGS: 00010016
RAX: ffff81001b028d98 RBX: ffff81001b804ac0 RCX: ffff81001b028150
RDX: 0000000000000003 RSI: ffff81001b028e70 RDI: ffff81001b804ac0
RBP: ffff81001b037e20 R08: 09f911029d74e35b R09: 00000000ffffff20
R10: 0000000000000010 R11: 0000000000000000 R12: 0000000000000800
R13: ffff81001b028e70 R14: 5a5a5a5a5a5a5a5a R15: ffff81001b028100
FS: 00000000409b4950(0000) GS:ffffffff80786000(0000) knlGS:0000000000000000
CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
CR2: 00000030ed8c6d80 CR3: 0000000019c38000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process kacpi_notify (pid: 96, threadinfo ffff81001b036000, task ffff81001bb06740)
Stack: ffffffff8037f2bc ffff81001b80b5e8 ffff81001b804ac0 ffff81001b028e78
ffffffff807f3bc0 0000000000000282 ffff81001b037e70 ffffffff80281afb
ffffffff807f3bc0 0000000000008025 ffff81001b028e78 ffff81001b028e78
Call Trace:
[<ffffffff8037f2bc>] ? acpi_ev_asynch_enable_gpe+0x2b/0x2f
[<ffffffff80281afb>] kfree+0x9c/0x216
[<ffffffff80375e86>] ? acpi_os_execute_deferred+0x0/0x39
[<ffffffff8037f2bc>] acpi_ev_asynch_enable_gpe+0x2b/0x2f
[<ffffffff80375eb2>] acpi_os_execute_deferred+0x2c/0x39
[<ffffffff8023f480>] run_workqueue+0x7d/0x106
[<ffffffff8023fe41>] worker_thread+0xd8/0xe5
[<ffffffff80242913>] ? autoremove_wake_function+0x0/0x38
[<ffffffff8023fd69>] ? worker_thread+0x0/0xe5
[<ffffffff802427d4>] kthread+0x49/0x79
[<ffffffff8020bef8>] child_rip+0xa/0x12
[<ffffffff8024278b>] ? kthread+0x0/0x79
[<ffffffff8020beee>] ? child_rip+0x0/0x12
Code: 29 c8 48 0f af c2 48 89 c2 48 c1 ea 20 3b 93 18 01 00 00 72 04 0f 0b eb fe 89 d0 0f af 83 0c 01 00 00 48 8d 04 01 49 39 c5 74 04 <0f> 0b eb fe 89 d0 41 c7 44 87 30 fe ff ff ff f6 83 15 01 00 00
RIP [<ffffffff8027fc0c>] cache_free_debugcheck+0x1d0/0x207
RSP <ffff81001b037df0>
---[ end trace b34da6ee0b4cc39e ]---
next prev parent reply other threads:[~2008-04-12 4:41 UTC|newest]
Thread overview: 123+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-04-12 4:24 ACPICA branch Len Brown
2008-04-12 4:24 ` [PATCH 01/73] ACPICA: Several fixes for internal method result stack Len Brown
2008-04-12 4:24 ` [PATCH 02/73] ACPICA: Removed unused code Len Brown
2008-04-12 4:24 ` [PATCH 03/73] ACPICA: Update for mutiple global lock acquisitions by same thread Len Brown
2008-04-12 4:24 ` [PATCH 04/73] ACPICA: changed order of interpretation of operand objects Len Brown
2008-04-12 4:24 ` [PATCH 05/73] ACPICA: Avoid use of invalid pointers in returned object field Len Brown
2008-04-12 4:24 ` [PATCH 06/73] ACPICA: Fixed a couple compiler warnings for extra extern statements Len Brown
2008-04-12 4:24 ` [PATCH 07/73] ACPICA: Update comments for acquire/release mutex interfaces Len Brown
2008-04-12 4:24 ` [PATCH 08/73] ACPICA: Removed extraneous code Len Brown
2008-04-12 4:24 ` [PATCH 09/73] ACPICA: Removed obsolete ACPI_NO_INTEGER64_SUPPORT define Len Brown
2008-04-12 4:24 ` [PATCH 10/73] ACPICA: Misc fixes for recent global lock code update Len Brown
2008-04-12 4:24 ` [PATCH 11/73] ACPICA: Increase maximum buffer size dumped to screen in buffer object dump Len Brown
2008-04-12 4:24 ` [PATCH 12/73] ACPICA: Fix for package reference counts Len Brown
2008-04-12 4:24 ` [PATCH 13/73] ACPICA: Update version to 20070320 Len Brown
2008-04-12 4:24 ` [PATCH 14/73] ACPICA: Fix for update of the Global Lock Handle Len Brown
2008-04-12 4:24 ` [PATCH 15/73] ACPICA: Update version to 20070508 Len Brown
2008-04-12 4:24 ` [PATCH 16/73] ACPICA: Updated error message for dynamic method serialization Len Brown
2008-04-12 4:25 ` [PATCH 17/73] ACPICA: Support for iASL - multiple files and wildcards Len Brown
2008-04-12 4:25 ` [PATCH 18/73] ACPICA: Add minimal disassembly support for the SLIC table Len Brown
2008-04-12 4:25 ` [PATCH 19/73] ACPICA: New interfaces for table event handlers Len Brown
2008-04-12 4:25 ` [PATCH 20/73] ACPICA: Fix for namespace lookup problem Len Brown
2008-04-12 4:25 ` [PATCH 21/73] ACPICA: update version number to 20070919 Len Brown
2008-04-12 4:25 ` [PATCH 22/73] ACPICA: Fix for Alias operator to see target child objects Len Brown
2008-04-12 4:25 ` [PATCH 23/73] ACPICA: Fix for fault if Load() fails Len Brown
2008-04-12 4:25 ` [PATCH 24/73] ACPICA: Fix a fault when storing DdbHandle to Debug object Len Brown
2008-04-12 4:25 ` [PATCH 25/73] ACPICA: Fix for memory leak related to DdbHandle objects Len Brown
2008-04-12 4:25 ` [PATCH 26/73] ACPICA: Add a table checksum verify for Load operator Len Brown
2008-04-12 4:25 ` [PATCH 27/73] ACPICA: Add error checks to prevent faults Len Brown
2008-04-12 4:25 ` [PATCH 28/73] ACPICA: Fix for Load/LoadTable to specify load location Len Brown
2008-04-12 4:25 ` [PATCH 29/73] ACPICA: Fixed a memory leak when Device or Thermal objects referenced in packages Len Brown
2008-04-12 4:25 ` [PATCH 30/73] ACPICA: Fix for Increment/Decrement operator, incorrect type change Len Brown
2008-04-12 4:25 ` [PATCH 31/73] ACPICA: Added additional parameter validation for LoadTable Len Brown
2008-04-12 4:25 ` [PATCH 32/73] ACPICA: Update version to 20071019 Len Brown
2008-04-12 4:25 ` [PATCH 33/73] ACPICA: Cosmetic changes only, no functional changes Len Brown
2008-04-12 4:25 ` [PATCH 34/73] " Len Brown
2008-04-12 4:25 ` [PATCH 35/73] ACPICA: Cleanup of debug output Len Brown
2008-04-12 4:25 ` [PATCH 36/73] ACPICA: Fixes a problem with control method references within packages Len Brown
2008-04-12 4:25 ` [PATCH 37/73] ACPICA: Fixed a problem with FromBCD and ToBCD with some compilers Len Brown
2008-04-12 4:25 ` [PATCH 38/73] ACPICA: Fixed a problem with Index references passed as method arguments Len Brown
2008-04-12 4:25 ` [PATCH 39/73] ACPICA: Fixed a problem with CopyObject used in conjunction with the Index operator Len Brown
2008-04-12 4:25 ` [PATCH 40/73] ACPICA: Update version to 20071114 Len Brown
2008-04-12 4:25 ` [PATCH 41/73] ACPICA: Fixed a problem with AcpiGetDevices where the search of a branch of the device tree could be terminated prematurely Len Brown
2008-04-12 4:25 ` [PATCH 42/73] ACPICA: Fixed a problem with Index Fields where the Index register was incorrectly limited to a maximum of 32 bits Len Brown
2008-04-12 4:25 ` [PATCH 43/73] ACPICA: Implemented full support for deferred execution for the TermArg string arguments for DataTableRegion Len Brown
2008-04-12 4:25 ` [PATCH 44/73] ACPICA: Undo accidental checkin of not-fully-tested mutex changes Len Brown
2008-04-12 4:25 ` [PATCH 45/73] ACPICA: Implemented full argument resolution support for the BankValue argument to BankField Len Brown
2008-04-12 4:25 ` [PATCH 46/73] ACPICA: Fixed a couple memory leaks associated with "implicit return" objects when the AML Interpreter slack mode is enabled Len Brown
2008-04-22 18:24 ` Len Brown
2008-04-12 4:25 ` [PATCH 47/73] ACPICA: Update version to 20071219 Len Brown
2008-04-12 4:25 ` [PATCH 48/73] ACPICA: Fix for SizeOf when used with Buffers and Packages Len Brown
2008-04-12 4:25 ` [PATCH 49/73] ACPICA: Methods now implicitly return 0 in slack mode Len Brown
2008-04-12 4:25 ` [PATCH 50/73] ACPICA: Fix for Load operator Len Brown
2008-04-12 4:25 ` [PATCH 51/73] ACPICA: Fix for LoadTable operator, input strings Len Brown
2008-04-12 4:25 ` [PATCH 52/73] ACPICA: Include file support for new ACPI tables Len Brown
2008-04-12 4:25 ` [PATCH 53/73] ACPICA: Bulletproof disassembler for bad " Len Brown
2008-04-12 4:25 ` [PATCH 54/73] ACPICA: Fixes for Unload and DDBHandles Len Brown
2008-04-12 4:25 ` [PATCH 55/73] ACPICA: Update version to 20080123 Len Brown
2008-04-12 4:25 ` [PATCH 56/73] ACPICA: Add va_end statements as appropriate Len Brown
2008-04-12 4:25 ` [PATCH 57/73] ACPICA: Added new error messages Len Brown
2008-04-12 4:25 ` [PATCH 58/73] ACPICA: Fix for ACPI_HIDWORD macro Len Brown
2008-04-12 4:25 ` [PATCH 59/73] ACPICA: Disassembler support for new ACPI tables Len Brown
2008-04-12 4:25 ` [PATCH 60/73] ACPICA: Additional GPE/Notify handling change Len Brown
2008-04-12 4:25 ` [PATCH 61/73] ACPICA: Fix for resource descriptor optimization issues for _CRS/_SRC Len Brown
2008-04-12 4:25 ` [PATCH 62/73] ACPICA: Update behavior of CopyObject to match ACPI spec Len Brown
2008-04-12 4:25 ` [PATCH 63/73] ACPICA: Fix for possible error when packages/buffers are passed to methods externally Len Brown
2008-04-12 4:25 ` [PATCH 64/73] ACPICA: Update ACPICA version to 20080213 Len Brown
2008-04-12 4:25 ` [PATCH 65/73] ACPICA: Fix for extraneous debug message for packages Len Brown
2008-04-15 7:09 ` Len Brown
2008-04-15 8:36 ` Alexey Starikovskiy
2008-04-15 18:46 ` Moore, Robert
2008-04-15 18:56 ` Alexey Starikovskiy
2008-04-15 20:19 ` Moore, Robert
2008-04-15 20:39 ` Alexey Starikovskiy
2008-04-15 21:01 ` Moore, Robert
2008-04-15 21:12 ` Alexey Starikovskiy
2008-04-15 21:29 ` Moore, Robert
2008-04-15 21:51 ` Alexey Starikovskiy
2008-04-15 22:27 ` Moore, Robert
2008-04-15 22:02 ` Tomas Carnecky
2008-04-15 21:57 ` Alexey Starikovskiy
2008-04-15 22:20 ` Moore, Robert
2008-04-15 21:56 ` Tomas Carnecky
2008-04-15 21:55 ` Alexey Starikovskiy
2008-04-22 19:23 ` Len Brown
2008-04-22 22:21 ` Moore, Robert
2008-04-22 23:22 ` Len Brown
2008-04-23 1:00 ` Moore, Robert
2008-04-12 4:25 ` [PATCH 66/73] ACPICA: Fix to handle NULL package elements correctly Len Brown
2008-04-12 4:25 ` [PATCH 67/73] ACPICA: Fixes for external Reference Objects Len Brown
2008-04-22 23:15 ` Len Brown
2008-04-12 4:25 ` [PATCH 68/73] ACPICA: Updates for Debug object output Len Brown
2008-04-12 4:25 ` [PATCH 69/73] ACPICA: Fixes for size of StartDependent resource descriptor Len Brown
2008-04-12 4:25 ` [PATCH 70/73] ACPICA: Fix to disable unknown spurious GPEs Len Brown
2008-04-23 2:57 ` Len Brown
2008-04-23 5:28 ` Alexey Starikovskiy
2008-04-23 20:35 ` Moore, Robert
2008-04-25 1:40 ` Len Brown
2008-04-25 1:53 ` Zhang Rui
2008-04-25 1:57 ` Moore, Robert
2008-04-25 2:10 ` Alexey Starikovskiy
2008-04-25 2:28 ` Zhang Rui
2008-04-25 2:39 ` Alexey Starikovskiy
2008-04-25 4:18 ` Moore, Robert
2008-05-21 8:28 ` Zhang, Rui
2008-05-21 16:56 ` Zhang Rui
2008-05-22 1:35 ` Zhao Yakui
2008-05-22 16:45 ` Moore, Robert
2008-05-22 16:55 ` Alexey Starikovskiy
2008-05-22 17:22 ` Moore, Robert
2008-05-28 17:40 ` Moore, Robert
2008-05-22 1:08 ` Zhao Yakui
2008-04-12 4:25 ` [PATCH 71/73] ACPICA: Update for new Notify values Len Brown
2008-04-12 4:25 ` [PATCH 72/73] ACPICA: Update version to 20080321 Len Brown
2008-04-12 4:25 ` [PATCH 73/73] ACPICA: Fix for some local named nodes not marked temporary and to disallow duplicates Len Brown
2008-04-12 4:41 ` Len Brown [this message]
2008-04-12 20:46 ` ACPICA branch - first try Core revision 20080321 Alexey Starikovskiy
2008-04-15 7:51 ` Len Brown
2008-04-29 9:04 ` ACPICA branch (0 Objects with 0 Devices 0 Methods 0 Regions) Len Brown
2008-04-29 16:09 ` Moore, Robert
2008-04-30 11:03 ` Lin Ming
2008-05-06 6:20 ` Lin Ming
2008-05-06 17:07 ` Moore, Robert
2008-05-13 5:45 ` Lin Ming
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200804120041.31583.lenb@kernel.org \
--to=lenb@kernel.org \
--cc=astarikovskiy@suse.de \
--cc=linux-acpi@vger.kernel.org \
--cc=robert.moore@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.