From: Paul Mundt <lethal@linux-sh.org>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-sh@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [GIT PULL] sh updates for 2.6.26-rc1
Date: Sat, 19 Apr 2008 13:25:49 +0000 [thread overview]
Message-ID: <20080419132548.GA23092@linux-sh.org> (raw)
Please pull from:
master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6.git
Which contains:
Angelo Castello (1):
rtc: rtc-sh: Add support for periodic IRQs.
Magnus Damm (13):
sh: SuperH KEYSC platform driver
sh: SuperH KEYSC keypad data for MigoR
sh: SuperH KEYSC keypad data for Solution Engine 7722
Fix sh_keysc double free
sh: Add MigoR header file
sh: Use physical addresses for sh7722 USBF resources
sh: Use phyical addresses for MigoR smc91x resources
sh: MigoR NOR flash support using physmap-flash
sh: MigoR NAND flash support using gen_flash
sh: Add I2C platform data to sh7722
sh: Add I2C support to MigoR
sh: Add rs5c732b RTC support to MigoR
sh: Add migor_ts support to MigoR
Masayuki Hosokawa (1):
sh: Hook up remaining IRQ sources for R7780MP FPGA.
Paul Mundt (11):
sh: Create an sh debugfs root.
sh: Initial support for the MX-G CPU.
sh: Hook up the rest of the SH7770 serial ports.
sh: Allow optimized clear/copy page routines to be used on SH-2.
sh: Fix up __access_ok() check for nommu.
sh: r7780rp: Hook up the I2C and SMBus platform devices.
sh: Fix up mach-types formatting from merge damage.
sh: Fix up SH7763 build.
sh: Add support for SH7723 CPU subtype.
sh: Fix up SH-4A part probe.
sh: Fix up L2 cache probe.
Yoshihiro Shimoda (1):
sh: Add support for Solution Engine SH7721 board
arch/sh/Kconfig | 30 +-
arch/sh/Kconfig.debug | 13 +-
arch/sh/Makefile | 1 +
arch/sh/boards/renesas/migor/setup.c | 197 +++++-
arch/sh/boards/renesas/r7780rp/irq-r7780mp.c | 39 +-
arch/sh/boards/renesas/r7780rp/setup.c | 42 +-
arch/sh/boards/se/7721/Makefile | 1 +
arch/sh/boards/se/7721/irq.c | 45 ++
arch/sh/boards/se/7721/setup.c | 99 +++
arch/sh/boards/se/7722/setup.c | 41 +
arch/sh/configs/se7721_defconfig | 1085 ++++++++++++++++++++++++++
arch/sh/kernel/cf-enabler.c | 15 +-
arch/sh/kernel/cpu/sh2a/Makefile | 7 +-
arch/sh/kernel/cpu/sh2a/probe.c | 3 +
arch/sh/kernel/cpu/sh2a/setup-mxg.c | 168 ++++
arch/sh/kernel/cpu/sh4/probe.c | 33 +-
arch/sh/kernel/cpu/sh4a/Makefile | 2 +
arch/sh/kernel/cpu/sh4a/setup-sh7722.c | 28 +-
arch/sh/kernel/cpu/sh4a/setup-sh7723.c | 300 +++++++
arch/sh/kernel/cpu/sh4a/setup-sh7763.c | 10 +-
arch/sh/kernel/cpu/sh4a/setup-sh7770.c | 37 +-
arch/sh/kernel/setup.c | 15 +
arch/sh/lib/clear_page.S | 6 +-
arch/sh/lib/copy_page.S | 6 +-
arch/sh/mm/cache-debugfs.c | 4 +-
arch/sh/mm/pmb.c | 2 +-
arch/sh/tools/mach-types | 5 +-
drivers/input/keyboard/Kconfig | 9 +
drivers/input/keyboard/Makefile | 1 +
drivers/input/keyboard/sh_keysc.c | 280 +++++++
drivers/rtc/rtc-sh.c | 296 +++++---
drivers/serial/sh-sci.c | 7 +-
drivers/serial/sh-sci.h | 60 ++-
include/asm-sh/bugs.h | 2 +-
include/asm-sh/cpu-sh4/freq.h | 6 +-
include/asm-sh/cpu-sh4/rtc.h | 5 +
include/asm-sh/migor.h | 58 ++
include/asm-sh/processor.h | 5 +-
include/asm-sh/r7780rp.h | 22 +-
include/asm-sh/se7721.h | 70 ++
include/asm-sh/se7722.h | 2 +
include/asm-sh/sh_keysc.h | 13 +
include/asm-sh/system.h | 2 +
include/asm-sh/uaccess_32.h | 5 +-
44 files changed, 2858 insertions(+), 219 deletions(-)
create mode 100644 arch/sh/boards/se/7721/Makefile
create mode 100644 arch/sh/boards/se/7721/irq.c
create mode 100644 arch/sh/boards/se/7721/setup.c
create mode 100644 arch/sh/configs/se7721_defconfig
create mode 100644 arch/sh/kernel/cpu/sh2a/setup-mxg.c
create mode 100644 arch/sh/kernel/cpu/sh4a/setup-sh7723.c
create mode 100644 drivers/input/keyboard/sh_keysc.c
create mode 100644 include/asm-sh/migor.h
create mode 100644 include/asm-sh/se7721.h
create mode 100644 include/asm-sh/sh_keysc.h
WARNING: multiple messages have this Message-ID (diff)
From: Paul Mundt <lethal@linux-sh.org>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-sh@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [GIT PULL] sh updates for 2.6.26-rc1
Date: Sat, 19 Apr 2008 22:25:49 +0900 [thread overview]
Message-ID: <20080419132548.GA23092@linux-sh.org> (raw)
Please pull from:
master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6.git
Which contains:
Angelo Castello (1):
rtc: rtc-sh: Add support for periodic IRQs.
Magnus Damm (13):
sh: SuperH KEYSC platform driver
sh: SuperH KEYSC keypad data for MigoR
sh: SuperH KEYSC keypad data for Solution Engine 7722
Fix sh_keysc double free
sh: Add MigoR header file
sh: Use physical addresses for sh7722 USBF resources
sh: Use phyical addresses for MigoR smc91x resources
sh: MigoR NOR flash support using physmap-flash
sh: MigoR NAND flash support using gen_flash
sh: Add I2C platform data to sh7722
sh: Add I2C support to MigoR
sh: Add rs5c732b RTC support to MigoR
sh: Add migor_ts support to MigoR
Masayuki Hosokawa (1):
sh: Hook up remaining IRQ sources for R7780MP FPGA.
Paul Mundt (11):
sh: Create an sh debugfs root.
sh: Initial support for the MX-G CPU.
sh: Hook up the rest of the SH7770 serial ports.
sh: Allow optimized clear/copy page routines to be used on SH-2.
sh: Fix up __access_ok() check for nommu.
sh: r7780rp: Hook up the I2C and SMBus platform devices.
sh: Fix up mach-types formatting from merge damage.
sh: Fix up SH7763 build.
sh: Add support for SH7723 CPU subtype.
sh: Fix up SH-4A part probe.
sh: Fix up L2 cache probe.
Yoshihiro Shimoda (1):
sh: Add support for Solution Engine SH7721 board
arch/sh/Kconfig | 30 +-
arch/sh/Kconfig.debug | 13 +-
arch/sh/Makefile | 1 +
arch/sh/boards/renesas/migor/setup.c | 197 +++++-
arch/sh/boards/renesas/r7780rp/irq-r7780mp.c | 39 +-
arch/sh/boards/renesas/r7780rp/setup.c | 42 +-
arch/sh/boards/se/7721/Makefile | 1 +
arch/sh/boards/se/7721/irq.c | 45 ++
arch/sh/boards/se/7721/setup.c | 99 +++
arch/sh/boards/se/7722/setup.c | 41 +
arch/sh/configs/se7721_defconfig | 1085 ++++++++++++++++++++++++++
arch/sh/kernel/cf-enabler.c | 15 +-
arch/sh/kernel/cpu/sh2a/Makefile | 7 +-
arch/sh/kernel/cpu/sh2a/probe.c | 3 +
arch/sh/kernel/cpu/sh2a/setup-mxg.c | 168 ++++
arch/sh/kernel/cpu/sh4/probe.c | 33 +-
arch/sh/kernel/cpu/sh4a/Makefile | 2 +
arch/sh/kernel/cpu/sh4a/setup-sh7722.c | 28 +-
arch/sh/kernel/cpu/sh4a/setup-sh7723.c | 300 +++++++
arch/sh/kernel/cpu/sh4a/setup-sh7763.c | 10 +-
arch/sh/kernel/cpu/sh4a/setup-sh7770.c | 37 +-
arch/sh/kernel/setup.c | 15 +
arch/sh/lib/clear_page.S | 6 +-
arch/sh/lib/copy_page.S | 6 +-
arch/sh/mm/cache-debugfs.c | 4 +-
arch/sh/mm/pmb.c | 2 +-
arch/sh/tools/mach-types | 5 +-
drivers/input/keyboard/Kconfig | 9 +
drivers/input/keyboard/Makefile | 1 +
drivers/input/keyboard/sh_keysc.c | 280 +++++++
drivers/rtc/rtc-sh.c | 296 +++++---
drivers/serial/sh-sci.c | 7 +-
drivers/serial/sh-sci.h | 60 ++-
include/asm-sh/bugs.h | 2 +-
include/asm-sh/cpu-sh4/freq.h | 6 +-
include/asm-sh/cpu-sh4/rtc.h | 5 +
include/asm-sh/migor.h | 58 ++
include/asm-sh/processor.h | 5 +-
include/asm-sh/r7780rp.h | 22 +-
include/asm-sh/se7721.h | 70 ++
include/asm-sh/se7722.h | 2 +
include/asm-sh/sh_keysc.h | 13 +
include/asm-sh/system.h | 2 +
include/asm-sh/uaccess_32.h | 5 +-
44 files changed, 2858 insertions(+), 219 deletions(-)
create mode 100644 arch/sh/boards/se/7721/Makefile
create mode 100644 arch/sh/boards/se/7721/irq.c
create mode 100644 arch/sh/boards/se/7721/setup.c
create mode 100644 arch/sh/configs/se7721_defconfig
create mode 100644 arch/sh/kernel/cpu/sh2a/setup-mxg.c
create mode 100644 arch/sh/kernel/cpu/sh4a/setup-sh7723.c
create mode 100644 drivers/input/keyboard/sh_keysc.c
create mode 100644 include/asm-sh/migor.h
create mode 100644 include/asm-sh/se7721.h
create mode 100644 include/asm-sh/sh_keysc.h
next reply other threads:[~2008-04-19 13:25 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-04-19 13:25 Paul Mundt [this message]
2008-04-19 13:25 ` [GIT PULL] sh updates for 2.6.26-rc1 Paul Mundt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080419132548.GA23092@linux-sh.org \
--to=lethal@linux-sh.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sh@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.