From: Jordan Crouse <jordan.crouse@amd.com>
To: Andres Salomon <dilinger@queued.net>
Cc: linux-fbdev-devel@lists.sourceforge.net,
linux-geode@bombadil.infradead.org,
Jens Rottmann <JRottmann@LiPPERT-AT.de>,
linux-kernel@vger.kernel.org,
Andrew Morton <akpm@linux-foundation.org>,
Linus Torvalds <torvalds@linux-foundation.org>
Subject: Re: lxfb driver regression
Date: Tue, 13 May 2008 14:05:58 -0600 [thread overview]
Message-ID: <20080513200558.GK28172@cosmic.amd.com> (raw)
In-Reply-To: <20080513135015.4452fb8f@ephemeral>
On 13/05/08 13:50 -0400, Andres Salomon wrote:
> On Tue, 13 May 2008 09:35:54 -0700
> Andrew Morton <akpm@linux-foundation.org> wrote:
>
> > On Tue, 13 May 2008 08:48:02 -0700 (PDT) Linus Torvalds
> > <torvalds@linux-foundation.org> wrote:
> >
> > >
> > >
> > > On Mon, 12 May 2008, Andres Salomon wrote:
> > > >
> > > > Sorry for the delay, I got around to testing this today. It works
> > > > much better on an XO, so I've ack'd it.
> > >
> > > If people expect me to apply that patch, I hope they'll re-send
> > > (with acks etc). Otherwise I just expect I'll get it through the
> > > normal fbdev queues (which is often Andrew, but shouldn't be).
> > >
> >
> > It got confusing. Turns out that I had a speculative revert patch,
> > followed by a new patch with an identical changelog to the first one.
> >
> > I folded them together and below is what I presently have against
> > mainline, but I have no changelog describing what it fixes.
> >
> > Can someone send some text please?
> >
>
> How's this? Jordan and Jens, please correct me if I'm off.
Acked-by: Jordan Crouse <jordan.crouse@amd.com>
> [PATCH] lxfb: fix regression on OLPC caused by PLL table updates
>
> The following patch caused a regression with OLPC panels:
>
> commit 3888d4639e78802c4ec1086127124e890461b9e4
> lxfb: extend PLL table to support dotclocks below 25 MHz
>
> Extends the PLL frequency table of the AMD Geode-LX frame buffer driver to
> make use of the DIV4 bit, thus adding support for dotclocks between 6 and 25
> MHz. These are needed for small LCDs (e.g. 320x240). Also inserts some
> intermediate steps between pre-existing frequencies.
>
> The problem was the insertion of intermediate steps into the frequency
> table; they would cause the wrong frequency to be matched. This patch
> drops those intermediate frequencies while keeping the sub-25MHz
> frequencies.
>
> Signed-off-by: Andres Salomon <dilinger@debian.org>
>
>
> > ---
> > a/drivers/video/geode/lxfb_ops.c~fix-lxfb-extend-pll-table-to-support-dotclocks-below-25-mhz
> > +++ a/drivers/video/geode/lxfb_ops.c @@ -63,54 +63,32 @@ static const
> > struct { { 0x00014284, 19688 },
> > { 0x00011104, 20400 },
> > { 0x00016363, 23625 },
> > - { 0x00015303, 24380 },
> > { 0x000031AC, 24923 },
> > { 0x0000215D, 25175 },
> > { 0x00001087, 27000 },
> > { 0x0000216C, 28322 },
> > { 0x0000218D, 28560 },
> > - { 0x00010041, 29913 },
> > { 0x000010C9, 31200 },
> > { 0x00003147, 31500 },
> > - { 0x000141A1, 32400 },
> > { 0x000010A7, 33032 },
> > - { 0x00012182, 33375 },
> > - { 0x000141B1, 33750 },
> > { 0x00002159, 35112 },
> > { 0x00004249, 35500 },
> > { 0x00000057, 36000 },
> > - { 0x000141E1, 37125 },
> > { 0x0000219A, 37889 },
> > { 0x00002158, 39168 },
> > { 0x00000045, 40000 },
> > - { 0x000131A1, 40500 },
> > - { 0x00010061, 42301 },
> > { 0x00000089, 43163 },
> > - { 0x00012151, 43875 },
> > { 0x000010E7, 44900 },
> > { 0x00002136, 45720 },
> > - { 0x000152E1, 47250 },
> > - { 0x00010071, 48000 },
> > { 0x00003207, 49500 },
> > { 0x00002187, 50000 },
> > - { 0x00014291, 50625 },
> > - { 0x00011101, 51188 },
> > - { 0x00017481, 54563 },
> > { 0x00004286, 56250 },
> > - { 0x00014170, 57375 },
> > - { 0x00016210, 58500 },
> > { 0x000010E5, 60065 },
> > - { 0x00013140, 62796 },
> > { 0x00004214, 65000 },
> > - { 0x00016250, 65250 },
> > { 0x00001105, 68179 },
> > - { 0x000141C0, 69600 },
> > - { 0x00015220, 70160 },
> > - { 0x00010050, 72000 },
> > { 0x000031E4, 74250 },
> > { 0x00003183, 75000 },
> > { 0x00004284, 78750 },
> > - { 0x00012130, 80052 },
> > { 0x00001104, 81600 },
> > { 0x00006363, 94500 },
> > { 0x00005303, 97520 },
> > _
> >
>
--
Jordan Crouse
Systems Software Development Engineer
Advanced Micro Devices, Inc.
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
WARNING: multiple messages have this Message-ID (diff)
From: Jordan Crouse <jordan.crouse@amd.com>
To: Andres Salomon <dilinger@queued.net>
Cc: Andrew Morton <akpm@linux-foundation.org>,
Linus Torvalds <torvalds@linux-foundation.org>,
Jens Rottmann <JRottmann@LiPPERT-AT.de>,
linux-kernel@vger.kernel.org, linux-geode@bombadil.infradead.org,
linux-fbdev-devel@lists.sourceforge.net
Subject: Re: lxfb driver regression
Date: Tue, 13 May 2008 14:05:58 -0600 [thread overview]
Message-ID: <20080513200558.GK28172@cosmic.amd.com> (raw)
In-Reply-To: <20080513135015.4452fb8f@ephemeral>
On 13/05/08 13:50 -0400, Andres Salomon wrote:
> On Tue, 13 May 2008 09:35:54 -0700
> Andrew Morton <akpm@linux-foundation.org> wrote:
>
> > On Tue, 13 May 2008 08:48:02 -0700 (PDT) Linus Torvalds
> > <torvalds@linux-foundation.org> wrote:
> >
> > >
> > >
> > > On Mon, 12 May 2008, Andres Salomon wrote:
> > > >
> > > > Sorry for the delay, I got around to testing this today. It works
> > > > much better on an XO, so I've ack'd it.
> > >
> > > If people expect me to apply that patch, I hope they'll re-send
> > > (with acks etc). Otherwise I just expect I'll get it through the
> > > normal fbdev queues (which is often Andrew, but shouldn't be).
> > >
> >
> > It got confusing. Turns out that I had a speculative revert patch,
> > followed by a new patch with an identical changelog to the first one.
> >
> > I folded them together and below is what I presently have against
> > mainline, but I have no changelog describing what it fixes.
> >
> > Can someone send some text please?
> >
>
> How's this? Jordan and Jens, please correct me if I'm off.
Acked-by: Jordan Crouse <jordan.crouse@amd.com>
> [PATCH] lxfb: fix regression on OLPC caused by PLL table updates
>
> The following patch caused a regression with OLPC panels:
>
> commit 3888d4639e78802c4ec1086127124e890461b9e4
> lxfb: extend PLL table to support dotclocks below 25 MHz
>
> Extends the PLL frequency table of the AMD Geode-LX frame buffer driver to
> make use of the DIV4 bit, thus adding support for dotclocks between 6 and 25
> MHz. These are needed for small LCDs (e.g. 320x240). Also inserts some
> intermediate steps between pre-existing frequencies.
>
> The problem was the insertion of intermediate steps into the frequency
> table; they would cause the wrong frequency to be matched. This patch
> drops those intermediate frequencies while keeping the sub-25MHz
> frequencies.
>
> Signed-off-by: Andres Salomon <dilinger@debian.org>
>
>
> > ---
> > a/drivers/video/geode/lxfb_ops.c~fix-lxfb-extend-pll-table-to-support-dotclocks-below-25-mhz
> > +++ a/drivers/video/geode/lxfb_ops.c @@ -63,54 +63,32 @@ static const
> > struct { { 0x00014284, 19688 },
> > { 0x00011104, 20400 },
> > { 0x00016363, 23625 },
> > - { 0x00015303, 24380 },
> > { 0x000031AC, 24923 },
> > { 0x0000215D, 25175 },
> > { 0x00001087, 27000 },
> > { 0x0000216C, 28322 },
> > { 0x0000218D, 28560 },
> > - { 0x00010041, 29913 },
> > { 0x000010C9, 31200 },
> > { 0x00003147, 31500 },
> > - { 0x000141A1, 32400 },
> > { 0x000010A7, 33032 },
> > - { 0x00012182, 33375 },
> > - { 0x000141B1, 33750 },
> > { 0x00002159, 35112 },
> > { 0x00004249, 35500 },
> > { 0x00000057, 36000 },
> > - { 0x000141E1, 37125 },
> > { 0x0000219A, 37889 },
> > { 0x00002158, 39168 },
> > { 0x00000045, 40000 },
> > - { 0x000131A1, 40500 },
> > - { 0x00010061, 42301 },
> > { 0x00000089, 43163 },
> > - { 0x00012151, 43875 },
> > { 0x000010E7, 44900 },
> > { 0x00002136, 45720 },
> > - { 0x000152E1, 47250 },
> > - { 0x00010071, 48000 },
> > { 0x00003207, 49500 },
> > { 0x00002187, 50000 },
> > - { 0x00014291, 50625 },
> > - { 0x00011101, 51188 },
> > - { 0x00017481, 54563 },
> > { 0x00004286, 56250 },
> > - { 0x00014170, 57375 },
> > - { 0x00016210, 58500 },
> > { 0x000010E5, 60065 },
> > - { 0x00013140, 62796 },
> > { 0x00004214, 65000 },
> > - { 0x00016250, 65250 },
> > { 0x00001105, 68179 },
> > - { 0x000141C0, 69600 },
> > - { 0x00015220, 70160 },
> > - { 0x00010050, 72000 },
> > { 0x000031E4, 74250 },
> > { 0x00003183, 75000 },
> > { 0x00004284, 78750 },
> > - { 0x00012130, 80052 },
> > { 0x00001104, 81600 },
> > { 0x00006363, 94500 },
> > { 0x00005303, 97520 },
> > _
> >
>
--
Jordan Crouse
Systems Software Development Engineer
Advanced Micro Devices, Inc.
next prev parent reply other threads:[~2008-05-13 20:06 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-05-08 1:08 lxfb driver regression Andres Salomon
2008-05-08 1:08 ` Andres Salomon
2008-05-08 1:11 ` Andrew Morton
2008-05-08 1:11 ` Andrew Morton
2008-05-08 13:56 ` Jens Rottmann
2008-05-08 13:56 ` Jens Rottmann
2008-05-08 14:48 ` Andres Salomon
2008-05-09 10:33 ` Jens Rottmann
2008-05-09 10:33 ` Jens Rottmann
2008-05-08 15:06 ` Jordan Crouse
2008-05-12 22:51 ` Andres Salomon
2008-05-12 22:51 ` Andres Salomon
2008-05-13 10:29 ` Jens Rottmann
2008-05-13 10:29 ` Jens Rottmann
2008-05-13 15:48 ` Linus Torvalds
2008-05-13 16:35 ` Andrew Morton
2008-05-13 17:50 ` Andres Salomon
2008-05-13 17:50 ` Andres Salomon
2008-05-13 17:55 ` Andres Salomon
2008-05-13 17:55 ` Andres Salomon
2008-05-13 20:05 ` Jordan Crouse [this message]
2008-05-13 20:05 ` Jordan Crouse
2008-05-14 12:44 ` Jens Rottmann
2008-05-14 12:44 ` Jens Rottmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080513200558.GK28172@cosmic.amd.com \
--to=jordan.crouse@amd.com \
--cc=JRottmann@LiPPERT-AT.de \
--cc=akpm@linux-foundation.org \
--cc=dilinger@queued.net \
--cc=linux-fbdev-devel@lists.sourceforge.net \
--cc=linux-geode@bombadil.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.