From: Stephen Hemminger <shemminger@vyatta.com>
To: Jeff Garzik <jgarzik@pobox.com>
Cc: netdev@vger.kernel.org
Subject: [PATCH 3/5] sky2: split phy power into two functions
Date: Wed, 14 May 2008 17:04:15 -0700 [thread overview]
Message-ID: <20080515000433.062985443@vyatta.com> (raw)
In-Reply-To: 20080515000412.984337700@vyatta.com
[-- Attachment #1: sky2-power-split.patch --]
[-- Type: text/plain, Size: 2961 bytes --]
Later changes add more code to PHY power changes so refactor now.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
---
This can wait for next release (#upstream) and go in -mm
--- a/drivers/net/sky2.c 2008-05-14 16:29:44.000000000 -0700
+++ b/drivers/net/sky2.c 2008-05-14 16:29:46.000000000 -0700
@@ -619,28 +619,35 @@ static void sky2_phy_init(struct sky2_hw
gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_DEF_MSK);
}
-static void sky2_phy_power(struct sky2_hw *hw, unsigned port, int onoff)
+static const u32 phy_power[] = { PCI_Y2_PHY1_POWD, PCI_Y2_PHY2_POWD };
+static const u32 coma_mode[] = { PCI_Y2_PHY1_COMA, PCI_Y2_PHY2_COMA };
+
+static void sky2_phy_power_up(struct sky2_hw *hw, unsigned port)
{
u32 reg1;
- static const u32 phy_power[] = { PCI_Y2_PHY1_POWD, PCI_Y2_PHY2_POWD };
- static const u32 coma_mode[] = { PCI_Y2_PHY1_COMA, PCI_Y2_PHY2_COMA };
sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
- /* Turn on/off phy power saving */
- if (onoff)
- reg1 &= ~phy_power[port];
- else
- reg1 |= phy_power[port];
+ reg1 &= ~phy_power[port];
- if (onoff && hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1)
+ if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1)
reg1 |= coma_mode[port];
sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
sky2_pci_read32(hw, PCI_DEV_REG1);
+}
+
+static void sky2_phy_power_down(struct sky2_hw *hw, unsigned port)
+{
+ u32 reg1;
+
+ sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
+ reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
+ reg1 |= phy_power[port];
- udelay(100);
+ sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
+ sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
}
/* Force a renegotiation */
@@ -675,8 +682,11 @@ static void sky2_wol_init(struct sky2_po
sky2->advertising &= ~(ADVERTISED_1000baseT_Half|ADVERTISED_1000baseT_Full);
sky2->flow_mode = FC_NONE;
- sky2_phy_power(hw, port, 1);
- sky2_phy_reinit(sky2);
+
+ spin_lock_bh(&sky2->phy_lock);
+ sky2_phy_power_up(hw, port);
+ sky2_phy_init(hw, port);
+ spin_unlock_bh(&sky2->phy_lock);
sky2->flow_mode = save_mode;
sky2->advertising = ctrl;
@@ -781,6 +791,7 @@ static void sky2_mac_init(struct sky2_hw
sky2_write8(hw, SK_REG(port, GMAC_IRQ_MSK), GMAC_DEF_MSK);
spin_lock_bh(&sky2->phy_lock);
+ sky2_phy_power_up(hw, port);
sky2_phy_init(hw, port);
spin_unlock_bh(&sky2->phy_lock);
@@ -1385,8 +1396,6 @@ static int sky2_up(struct net_device *de
if (!sky2->rx_ring)
goto err_out;
- sky2_phy_power(hw, port, 1);
-
sky2_mac_init(hw, port);
/* Register is number of 4K blocks on internal RAM buffer. */
@@ -1767,7 +1776,7 @@ static int sky2_down(struct net_device *
sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET);
sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_SET);
- sky2_phy_power(hw, port, 0);
+ sky2_phy_power_down(hw, port);
netif_carrier_off(dev);
--
next prev parent reply other threads:[~2008-05-15 0:08 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-05-15 0:04 [PATCH 0/5] sky2: driver update Stephen Hemminger
2008-05-15 0:04 ` [PATCH 1/5] sky2: restore vlan acceleration on reset Stephen Hemminger
2008-05-21 17:02 ` Stephen Hemminger
2008-05-21 17:12 ` Jeff Garzik
2008-05-22 10:01 ` Jeff Garzik
2008-05-15 0:04 ` [PATCH 2/5] sky2: don't warn if page allocation fails Stephen Hemminger
2008-05-22 9:57 ` Jeff Garzik
2008-05-27 18:47 ` Stephen Hemminger
2008-06-03 6:16 ` Nick Piggin
2008-05-15 0:04 ` Stephen Hemminger [this message]
2008-05-31 2:20 ` [PATCH 3/5] sky2: split phy power into two functions Jeff Garzik
2008-05-15 0:04 ` [PATCH 4/5] sky2: put PHY in sleep when down Stephen Hemminger
2008-05-15 0:04 ` [PATCH 5/5] sky2: pci power savings Stephen Hemminger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080515000433.062985443@vyatta.com \
--to=shemminger@vyatta.com \
--cc=jgarzik@pobox.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.