All of lore.kernel.org
 help / color / mirror / Atom feed
From: "John W. Linville" <linville@tuxdriver.com>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org, linux-wireless@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: pull request: wireless-2.6 2008-05-16
Date: Fri, 16 May 2008 17:31:37 -0400	[thread overview]
Message-ID: <20080516213137.GA16638@tuxdriver.com> (raw)
In-Reply-To: <20080515195341.GB25905@tuxdriver.com>

David,

Another quick round of fixes intended for 2.6.26 (including the
corrected version of the "11n hidden ssid" patch)...

Thanks!

John

---

Individual patches are available here:

        http://www.kernel.org/pub/linux/kernel/people/linville/wireless-2.6/

---

The following changes since commit 066b2118976e6e7cc50eed39e2747c75343a23c4:
  Marcin Slusarz (1):
        isdn/capi: Return proper errnos on module init.

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6.git master

Abhijeet Kolekar (1):
      mac80211 : Association with 11n hidden ssid ap.

Brian Cavagnolo (1):
      libertas: fix command timeout after firmware failure

Ivo van Doorn (1):
      mac80211: Add RTNL version of ieee80211_iterate_active_interfaces

Masakazu Mokuno (1):
      wireless: Create 'device' symlink in sysfs

Mathieu Chouquet-Stringer (1):
      hostap: fix "registers" registration in procfs

Roel Kluin (1):
      wireless, airo: waitbusy() won't delay

 drivers/net/wireless/airo.c             |    3 +-
 drivers/net/wireless/hostap/hostap_hw.c |    9 +++----
 drivers/net/wireless/ipw2200.c          |    1 +
 drivers/net/wireless/libertas/main.c    |    2 +
 include/net/mac80211.h                  |   25 +++++++++++++++++++-
 net/mac80211/mlme.c                     |   14 ++++-------
 net/mac80211/util.c                     |   37 ++++++++++++++++++++++++++++++-
 7 files changed, 73 insertions(+), 18 deletions(-)

diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c
index 45f47c1..4e1c690 100644
--- a/drivers/net/wireless/airo.c
+++ b/drivers/net/wireless/airo.c
@@ -2668,6 +2668,7 @@ static struct net_device *init_wifidev(struct airo_info *ai,
 	dev->irq = ethdev->irq;
 	dev->base_addr = ethdev->base_addr;
 	dev->wireless_data = ethdev->wireless_data;
+	SET_NETDEV_DEV(dev, ethdev->dev.parent);
 	memcpy(dev->dev_addr, ethdev->dev_addr, dev->addr_len);
 	err = register_netdev(dev);
 	if (err<0) {
@@ -2904,7 +2905,7 @@ EXPORT_SYMBOL(init_airo_card);
 
 static int waitbusy (struct airo_info *ai) {
 	int delay = 0;
-	while ((IN4500 (ai, COMMAND) & COMMAND_BUSY) & (delay < 10000)) {
+	while ((IN4500 (ai, COMMAND) & COMMAND_BUSY) && (delay < 10000)) {
 		udelay (10);
 		if ((++delay % 20) == 0)
 			OUT4500(ai, EVACK, EV_CLEARCOMMANDBUSY);
diff --git a/drivers/net/wireless/hostap/hostap_hw.c b/drivers/net/wireless/hostap/hostap_hw.c
index 7be68db..cdf90c4 100644
--- a/drivers/net/wireless/hostap/hostap_hw.c
+++ b/drivers/net/wireless/hostap/hostap_hw.c
@@ -3276,11 +3276,6 @@ while (0)
 	}
 	printk(KERN_INFO "%s: Registered netdevice %s\n", dev_info, dev->name);
 
-#ifndef PRISM2_NO_PROCFS_DEBUG
-	create_proc_read_entry("registers", 0, local->proc,
-			       prism2_registers_proc_read, local);
-#endif /* PRISM2_NO_PROCFS_DEBUG */
-
 	hostap_init_data(local);
 	return dev;
 
@@ -3307,6 +3302,10 @@ static int hostap_hw_ready(struct net_device *dev)
 			netif_carrier_off(local->ddev);
 		}
 		hostap_init_proc(local);
+#ifndef PRISM2_NO_PROCFS_DEBUG
+		create_proc_read_entry("registers", 0, local->proc,
+				       prism2_registers_proc_read, local);
+#endif /* PRISM2_NO_PROCFS_DEBUG */
 		hostap_init_ap_proc(local);
 		return 0;
 	}
diff --git a/drivers/net/wireless/ipw2200.c b/drivers/net/wireless/ipw2200.c
index fa87c5c..d74c061 100644
--- a/drivers/net/wireless/ipw2200.c
+++ b/drivers/net/wireless/ipw2200.c
@@ -11584,6 +11584,7 @@ static int ipw_prom_alloc(struct ipw_priv *priv)
 	priv->prom_net_dev->hard_start_xmit = ipw_prom_hard_start_xmit;
 
 	priv->prom_priv->ieee->iw_mode = IW_MODE_MONITOR;
+	SET_NETDEV_DEV(priv->prom_net_dev, &priv->pci_dev->dev);
 
 	rc = register_netdev(priv->prom_net_dev);
 	if (rc) {
diff --git a/drivers/net/wireless/libertas/main.c b/drivers/net/wireless/libertas/main.c
index 406f54d..e1f0660 100644
--- a/drivers/net/wireless/libertas/main.c
+++ b/drivers/net/wireless/libertas/main.c
@@ -756,6 +756,7 @@ static int lbs_thread(void *data)
 				priv->nr_retries = 0;
 			} else {
 				priv->cur_cmd = NULL;
+				priv->dnld_sent = DNLD_RES_RECEIVED;
 				lbs_pr_info("requeueing command %x due to timeout (#%d)\n",
 					    le16_to_cpu(cmdnode->cmdbuf->command), priv->nr_retries);
 
@@ -1564,6 +1565,7 @@ static int lbs_add_rtap(struct lbs_private *priv)
 	rtap_dev->hard_start_xmit = lbs_rtap_hard_start_xmit;
 	rtap_dev->set_multicast_list = lbs_set_multicast_list;
 	rtap_dev->priv = priv;
+	SET_NETDEV_DEV(rtap_dev, priv->dev->dev.parent);
 
 	ret = register_netdev(rtap_dev);
 	if (ret) {
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 4a80d74..dae3f9e 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -1594,13 +1594,16 @@ void ieee80211_wake_queues(struct ieee80211_hw *hw);
 void ieee80211_scan_completed(struct ieee80211_hw *hw);
 
 /**
- * ieee80211_iterate_active_interfaces - iterate active interfaces
+ * ieee80211_iterate_active_interfaces- iterate active interfaces
  *
  * This function iterates over the interfaces associated with a given
  * hardware that are currently active and calls the callback for them.
+ * This function allows the iterator function to sleep, when the iterator
+ * function is atomic @ieee80211_iterate_active_interfaces_atomic can
+ * be used.
  *
  * @hw: the hardware struct of which the interfaces should be iterated over
- * @iterator: the iterator function to call, cannot sleep
+ * @iterator: the iterator function to call
  * @data: first argument of the iterator function
  */
 void ieee80211_iterate_active_interfaces(struct ieee80211_hw *hw,
@@ -1609,6 +1612,24 @@ void ieee80211_iterate_active_interfaces(struct ieee80211_hw *hw,
 					 void *data);
 
 /**
+ * ieee80211_iterate_active_interfaces_atomic - iterate active interfaces
+ *
+ * This function iterates over the interfaces associated with a given
+ * hardware that are currently active and calls the callback for them.
+ * This function requires the iterator callback function to be atomic,
+ * if that is not desired, use @ieee80211_iterate_active_interfaces instead.
+ *
+ * @hw: the hardware struct of which the interfaces should be iterated over
+ * @iterator: the iterator function to call, cannot sleep
+ * @data: first argument of the iterator function
+ */
+void ieee80211_iterate_active_interfaces_atomic(struct ieee80211_hw *hw,
+						void (*iterator)(void *data,
+						    u8 *mac,
+						    struct ieee80211_vif *vif),
+						void *data);
+
+/**
  * ieee80211_start_tx_ba_session - Start a tx Block Ack session.
  * @hw: pointer as obtained from ieee80211_alloc_hw().
  * @ra: receiver address of the BA session recipient
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 4adba09..e470bf1 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -3446,21 +3446,17 @@ static int ieee80211_sta_config_auth(struct net_device *dev,
 	struct ieee80211_sta_bss *bss, *selected = NULL;
 	int top_rssi = 0, freq;
 
-	if (!(ifsta->flags & (IEEE80211_STA_AUTO_SSID_SEL |
-	    IEEE80211_STA_AUTO_BSSID_SEL | IEEE80211_STA_AUTO_CHANNEL_SEL))) {
-		ifsta->state = IEEE80211_AUTHENTICATE;
-		ieee80211_sta_reset_auth(dev, ifsta);
-		return 0;
-	}
-
 	spin_lock_bh(&local->sta_bss_lock);
 	freq = local->oper_channel->center_freq;
 	list_for_each_entry(bss, &local->sta_bss_list, list) {
 		if (!(bss->capability & WLAN_CAPABILITY_ESS))
 			continue;
 
-		if (!!(bss->capability & WLAN_CAPABILITY_PRIVACY) ^
-		    !!sdata->default_key)
+		if ((ifsta->flags & (IEEE80211_STA_AUTO_SSID_SEL |
+			IEEE80211_STA_AUTO_BSSID_SEL |
+			IEEE80211_STA_AUTO_CHANNEL_SEL)) &&
+		    (!!(bss->capability & WLAN_CAPABILITY_PRIVACY) ^
+		     !!sdata->default_key))
 			continue;
 
 		if (!(ifsta->flags & IEEE80211_STA_AUTO_CHANNEL_SEL) &&
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index 24a465c..131e9e6 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -389,6 +389,41 @@ void ieee80211_iterate_active_interfaces(
 	struct ieee80211_local *local = hw_to_local(hw);
 	struct ieee80211_sub_if_data *sdata;
 
+	rtnl_lock();
+
+	list_for_each_entry(sdata, &local->interfaces, list) {
+		switch (sdata->vif.type) {
+		case IEEE80211_IF_TYPE_INVALID:
+		case IEEE80211_IF_TYPE_MNTR:
+		case IEEE80211_IF_TYPE_VLAN:
+			continue;
+		case IEEE80211_IF_TYPE_AP:
+		case IEEE80211_IF_TYPE_STA:
+		case IEEE80211_IF_TYPE_IBSS:
+		case IEEE80211_IF_TYPE_WDS:
+		case IEEE80211_IF_TYPE_MESH_POINT:
+			break;
+		}
+		if (sdata->dev == local->mdev)
+			continue;
+		if (netif_running(sdata->dev))
+			iterator(data, sdata->dev->dev_addr,
+				 &sdata->vif);
+	}
+
+	rtnl_unlock();
+}
+EXPORT_SYMBOL_GPL(ieee80211_iterate_active_interfaces);
+
+void ieee80211_iterate_active_interfaces_atomic(
+	struct ieee80211_hw *hw,
+	void (*iterator)(void *data, u8 *mac,
+			 struct ieee80211_vif *vif),
+	void *data)
+{
+	struct ieee80211_local *local = hw_to_local(hw);
+	struct ieee80211_sub_if_data *sdata;
+
 	rcu_read_lock();
 
 	list_for_each_entry_rcu(sdata, &local->interfaces, list) {
@@ -413,4 +448,4 @@ void ieee80211_iterate_active_interfaces(
 
 	rcu_read_unlock();
 }
-EXPORT_SYMBOL_GPL(ieee80211_iterate_active_interfaces);
+EXPORT_SYMBOL_GPL(ieee80211_iterate_active_interfaces_atomic);
-- 
John W. Linville
linville@tuxdriver.com

WARNING: multiple messages have this Message-ID (diff)
From: "John W. Linville" <linville-2XuSBdqkA4R54TAoqtyWWQ@public.gmane.org>
To: davem-fT/PcQaiUtIeIZ0/mPfg9Q@public.gmane.org
Cc: netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-wireless-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: pull request: wireless-2.6 2008-05-16
Date: Fri, 16 May 2008 17:31:37 -0400	[thread overview]
Message-ID: <20080516213137.GA16638@tuxdriver.com> (raw)
In-Reply-To: <20080515195341.GB25905-2XuSBdqkA4R54TAoqtyWWQ@public.gmane.org>

David,

Another quick round of fixes intended for 2.6.26 (including the
corrected version of the "11n hidden ssid" patch)...

Thanks!

John

---

Individual patches are available here:

        http://www.kernel.org/pub/linux/kernel/people/linville/wireless-2.6/

---

The following changes since commit 066b2118976e6e7cc50eed39e2747c75343a23c4:
  Marcin Slusarz (1):
        isdn/capi: Return proper errnos on module init.

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6.git master

Abhijeet Kolekar (1):
      mac80211 : Association with 11n hidden ssid ap.

Brian Cavagnolo (1):
      libertas: fix command timeout after firmware failure

Ivo van Doorn (1):
      mac80211: Add RTNL version of ieee80211_iterate_active_interfaces

Masakazu Mokuno (1):
      wireless: Create 'device' symlink in sysfs

Mathieu Chouquet-Stringer (1):
      hostap: fix "registers" registration in procfs

Roel Kluin (1):
      wireless, airo: waitbusy() won't delay

 drivers/net/wireless/airo.c             |    3 +-
 drivers/net/wireless/hostap/hostap_hw.c |    9 +++----
 drivers/net/wireless/ipw2200.c          |    1 +
 drivers/net/wireless/libertas/main.c    |    2 +
 include/net/mac80211.h                  |   25 +++++++++++++++++++-
 net/mac80211/mlme.c                     |   14 ++++-------
 net/mac80211/util.c                     |   37 ++++++++++++++++++++++++++++++-
 7 files changed, 73 insertions(+), 18 deletions(-)

diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c
index 45f47c1..4e1c690 100644
--- a/drivers/net/wireless/airo.c
+++ b/drivers/net/wireless/airo.c
@@ -2668,6 +2668,7 @@ static struct net_device *init_wifidev(struct airo_info *ai,
 	dev->irq = ethdev->irq;
 	dev->base_addr = ethdev->base_addr;
 	dev->wireless_data = ethdev->wireless_data;
+	SET_NETDEV_DEV(dev, ethdev->dev.parent);
 	memcpy(dev->dev_addr, ethdev->dev_addr, dev->addr_len);
 	err = register_netdev(dev);
 	if (err<0) {
@@ -2904,7 +2905,7 @@ EXPORT_SYMBOL(init_airo_card);
 
 static int waitbusy (struct airo_info *ai) {
 	int delay = 0;
-	while ((IN4500 (ai, COMMAND) & COMMAND_BUSY) & (delay < 10000)) {
+	while ((IN4500 (ai, COMMAND) & COMMAND_BUSY) && (delay < 10000)) {
 		udelay (10);
 		if ((++delay % 20) == 0)
 			OUT4500(ai, EVACK, EV_CLEARCOMMANDBUSY);
diff --git a/drivers/net/wireless/hostap/hostap_hw.c b/drivers/net/wireless/hostap/hostap_hw.c
index 7be68db..cdf90c4 100644
--- a/drivers/net/wireless/hostap/hostap_hw.c
+++ b/drivers/net/wireless/hostap/hostap_hw.c
@@ -3276,11 +3276,6 @@ while (0)
 	}
 	printk(KERN_INFO "%s: Registered netdevice %s\n", dev_info, dev->name);
 
-#ifndef PRISM2_NO_PROCFS_DEBUG
-	create_proc_read_entry("registers", 0, local->proc,
-			       prism2_registers_proc_read, local);
-#endif /* PRISM2_NO_PROCFS_DEBUG */
-
 	hostap_init_data(local);
 	return dev;
 
@@ -3307,6 +3302,10 @@ static int hostap_hw_ready(struct net_device *dev)
 			netif_carrier_off(local->ddev);
 		}
 		hostap_init_proc(local);
+#ifndef PRISM2_NO_PROCFS_DEBUG
+		create_proc_read_entry("registers", 0, local->proc,
+				       prism2_registers_proc_read, local);
+#endif /* PRISM2_NO_PROCFS_DEBUG */
 		hostap_init_ap_proc(local);
 		return 0;
 	}
diff --git a/drivers/net/wireless/ipw2200.c b/drivers/net/wireless/ipw2200.c
index fa87c5c..d74c061 100644
--- a/drivers/net/wireless/ipw2200.c
+++ b/drivers/net/wireless/ipw2200.c
@@ -11584,6 +11584,7 @@ static int ipw_prom_alloc(struct ipw_priv *priv)
 	priv->prom_net_dev->hard_start_xmit = ipw_prom_hard_start_xmit;
 
 	priv->prom_priv->ieee->iw_mode = IW_MODE_MONITOR;
+	SET_NETDEV_DEV(priv->prom_net_dev, &priv->pci_dev->dev);
 
 	rc = register_netdev(priv->prom_net_dev);
 	if (rc) {
diff --git a/drivers/net/wireless/libertas/main.c b/drivers/net/wireless/libertas/main.c
index 406f54d..e1f0660 100644
--- a/drivers/net/wireless/libertas/main.c
+++ b/drivers/net/wireless/libertas/main.c
@@ -756,6 +756,7 @@ static int lbs_thread(void *data)
 				priv->nr_retries = 0;
 			} else {
 				priv->cur_cmd = NULL;
+				priv->dnld_sent = DNLD_RES_RECEIVED;
 				lbs_pr_info("requeueing command %x due to timeout (#%d)\n",
 					    le16_to_cpu(cmdnode->cmdbuf->command), priv->nr_retries);
 
@@ -1564,6 +1565,7 @@ static int lbs_add_rtap(struct lbs_private *priv)
 	rtap_dev->hard_start_xmit = lbs_rtap_hard_start_xmit;
 	rtap_dev->set_multicast_list = lbs_set_multicast_list;
 	rtap_dev->priv = priv;
+	SET_NETDEV_DEV(rtap_dev, priv->dev->dev.parent);
 
 	ret = register_netdev(rtap_dev);
 	if (ret) {
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 4a80d74..dae3f9e 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -1594,13 +1594,16 @@ void ieee80211_wake_queues(struct ieee80211_hw *hw);
 void ieee80211_scan_completed(struct ieee80211_hw *hw);
 
 /**
- * ieee80211_iterate_active_interfaces - iterate active interfaces
+ * ieee80211_iterate_active_interfaces- iterate active interfaces
  *
  * This function iterates over the interfaces associated with a given
  * hardware that are currently active and calls the callback for them.
+ * This function allows the iterator function to sleep, when the iterator
+ * function is atomic @ieee80211_iterate_active_interfaces_atomic can
+ * be used.
  *
  * @hw: the hardware struct of which the interfaces should be iterated over
- * @iterator: the iterator function to call, cannot sleep
+ * @iterator: the iterator function to call
  * @data: first argument of the iterator function
  */
 void ieee80211_iterate_active_interfaces(struct ieee80211_hw *hw,
@@ -1609,6 +1612,24 @@ void ieee80211_iterate_active_interfaces(struct ieee80211_hw *hw,
 					 void *data);
 
 /**
+ * ieee80211_iterate_active_interfaces_atomic - iterate active interfaces
+ *
+ * This function iterates over the interfaces associated with a given
+ * hardware that are currently active and calls the callback for them.
+ * This function requires the iterator callback function to be atomic,
+ * if that is not desired, use @ieee80211_iterate_active_interfaces instead.
+ *
+ * @hw: the hardware struct of which the interfaces should be iterated over
+ * @iterator: the iterator function to call, cannot sleep
+ * @data: first argument of the iterator function
+ */
+void ieee80211_iterate_active_interfaces_atomic(struct ieee80211_hw *hw,
+						void (*iterator)(void *data,
+						    u8 *mac,
+						    struct ieee80211_vif *vif),
+						void *data);
+
+/**
  * ieee80211_start_tx_ba_session - Start a tx Block Ack session.
  * @hw: pointer as obtained from ieee80211_alloc_hw().
  * @ra: receiver address of the BA session recipient
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 4adba09..e470bf1 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -3446,21 +3446,17 @@ static int ieee80211_sta_config_auth(struct net_device *dev,
 	struct ieee80211_sta_bss *bss, *selected = NULL;
 	int top_rssi = 0, freq;
 
-	if (!(ifsta->flags & (IEEE80211_STA_AUTO_SSID_SEL |
-	    IEEE80211_STA_AUTO_BSSID_SEL | IEEE80211_STA_AUTO_CHANNEL_SEL))) {
-		ifsta->state = IEEE80211_AUTHENTICATE;
-		ieee80211_sta_reset_auth(dev, ifsta);
-		return 0;
-	}
-
 	spin_lock_bh(&local->sta_bss_lock);
 	freq = local->oper_channel->center_freq;
 	list_for_each_entry(bss, &local->sta_bss_list, list) {
 		if (!(bss->capability & WLAN_CAPABILITY_ESS))
 			continue;
 
-		if (!!(bss->capability & WLAN_CAPABILITY_PRIVACY) ^
-		    !!sdata->default_key)
+		if ((ifsta->flags & (IEEE80211_STA_AUTO_SSID_SEL |
+			IEEE80211_STA_AUTO_BSSID_SEL |
+			IEEE80211_STA_AUTO_CHANNEL_SEL)) &&
+		    (!!(bss->capability & WLAN_CAPABILITY_PRIVACY) ^
+		     !!sdata->default_key))
 			continue;
 
 		if (!(ifsta->flags & IEEE80211_STA_AUTO_CHANNEL_SEL) &&
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index 24a465c..131e9e6 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -389,6 +389,41 @@ void ieee80211_iterate_active_interfaces(
 	struct ieee80211_local *local = hw_to_local(hw);
 	struct ieee80211_sub_if_data *sdata;
 
+	rtnl_lock();
+
+	list_for_each_entry(sdata, &local->interfaces, list) {
+		switch (sdata->vif.type) {
+		case IEEE80211_IF_TYPE_INVALID:
+		case IEEE80211_IF_TYPE_MNTR:
+		case IEEE80211_IF_TYPE_VLAN:
+			continue;
+		case IEEE80211_IF_TYPE_AP:
+		case IEEE80211_IF_TYPE_STA:
+		case IEEE80211_IF_TYPE_IBSS:
+		case IEEE80211_IF_TYPE_WDS:
+		case IEEE80211_IF_TYPE_MESH_POINT:
+			break;
+		}
+		if (sdata->dev == local->mdev)
+			continue;
+		if (netif_running(sdata->dev))
+			iterator(data, sdata->dev->dev_addr,
+				 &sdata->vif);
+	}
+
+	rtnl_unlock();
+}
+EXPORT_SYMBOL_GPL(ieee80211_iterate_active_interfaces);
+
+void ieee80211_iterate_active_interfaces_atomic(
+	struct ieee80211_hw *hw,
+	void (*iterator)(void *data, u8 *mac,
+			 struct ieee80211_vif *vif),
+	void *data)
+{
+	struct ieee80211_local *local = hw_to_local(hw);
+	struct ieee80211_sub_if_data *sdata;
+
 	rcu_read_lock();
 
 	list_for_each_entry_rcu(sdata, &local->interfaces, list) {
@@ -413,4 +448,4 @@ void ieee80211_iterate_active_interfaces(
 
 	rcu_read_unlock();
 }
-EXPORT_SYMBOL_GPL(ieee80211_iterate_active_interfaces);
+EXPORT_SYMBOL_GPL(ieee80211_iterate_active_interfaces_atomic);
-- 
John W. Linville
linville-2XuSBdqkA4R54TAoqtyWWQ@public.gmane.org
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  parent reply	other threads:[~2008-05-19 13:01 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-05-15 19:53 pull request: wireless-2.6 2008-05-15 John W. Linville
2008-05-16 13:21 ` John W. Linville
2008-05-16 19:56   ` David Miller
2008-05-16 21:31 ` John W. Linville [this message]
2008-05-16 21:31   ` pull request: wireless-2.6 2008-05-16 John W. Linville
2008-05-19 23:32   ` David Miller
2008-05-19 23:32     ` David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20080516213137.GA16638@tuxdriver.com \
    --to=linville@tuxdriver.com \
    --cc=davem@davemloft.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.