From: Alan Cox <alan@lxorguk.ukuu.org.uk>
To: akpm@osdl.org, linux-kernel@vger.kernel.org, wim@iguana.be
Subject: [PATCH 35/57] s3c2410: watchdog cleanup and switch to unlocked_ioctl
Date: Mon, 19 May 2008 14:08:00 +0100 [thread overview]
Message-ID: <20080519130759.31722.36146.stgit@core> (raw)
In-Reply-To: <20080519124659.31722.51847.stgit@core>
From: Alan Cox <alan@redhat.com>
---
drivers/watchdog/s3c2410_wdt.c | 148 ++++++++++++++++++++++------------------
1 files changed, 80 insertions(+), 68 deletions(-)
diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c
index 98532c0..97b4a2e 100644
--- a/drivers/watchdog/s3c2410_wdt.c
+++ b/drivers/watchdog/s3c2410_wdt.c
@@ -46,9 +46,8 @@
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/clk.h>
-
-#include <asm/uaccess.h>
-#include <asm/io.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
#include <asm/arch/map.h>
@@ -65,8 +64,8 @@
static int nowayout = WATCHDOG_NOWAYOUT;
static int tmr_margin = CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME;
static int tmr_atboot = CONFIG_S3C2410_WATCHDOG_ATBOOT;
-static int soft_noboot = 0;
-static int debug = 0;
+static int soft_noboot;
+static int debug;
module_param(tmr_margin, int, 0);
module_param(tmr_atboot, int, 0);
@@ -74,24 +73,23 @@ module_param(nowayout, int, 0);
module_param(soft_noboot, int, 0);
module_param(debug, int, 0);
-MODULE_PARM_DESC(tmr_margin, "Watchdog tmr_margin in seconds. default=" __MODULE_STRING(CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME) ")");
-
-MODULE_PARM_DESC(tmr_atboot, "Watchdog is started at boot time if set to 1, default=" __MODULE_STRING(CONFIG_S3C2410_WATCHDOG_ATBOOT));
-
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
-
+MODULE_PARM_DESC(tmr_margin, "Watchdog tmr_margin in seconds. default="
+ __MODULE_STRING(CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME) ")");
+MODULE_PARM_DESC(tmr_atboot,
+ "Watchdog is started at boot time if set to 1, default="
+ __MODULE_STRING(CONFIG_S3C2410_WATCHDOG_ATBOOT));
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
+ __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
MODULE_PARM_DESC(soft_noboot, "Watchdog action, set to 1 to ignore reboots, 0 to reboot (default depends on ONLY_TESTING)");
-
MODULE_PARM_DESC(debug, "Watchdog debug, set to >1 for debug, (default 0)");
typedef enum close_state {
CLOSE_STATE_NOT,
- CLOSE_STATE_ALLOW=0x4021
+ CLOSE_STATE_ALLOW = 0x4021
} close_state_t;
-static DECLARE_MUTEX(open_lock);
-
+static unsigned long open_lock;
static struct device *wdt_dev; /* platform device attached to */
static struct resource *wdt_mem;
static struct resource *wdt_irq;
@@ -99,38 +97,58 @@ static struct clk *wdt_clock;
static void __iomem *wdt_base;
static unsigned int wdt_count;
static close_state_t allow_close;
+static DEFINE_SPINLOCK(wdt_lock);
/* watchdog control routines */
#define DBG(msg...) do { \
if (debug) \
printk(KERN_INFO msg); \
- } while(0)
+ } while (0)
/* functions */
-static int s3c2410wdt_keepalive(void)
+static void s3c2410wdt_keepalive(void)
{
+ spin_lock(&wdt_lock);
writel(wdt_count, wdt_base + S3C2410_WTCNT);
- return 0;
+ spin_unlock(&wdt_lock);
}
-static int s3c2410wdt_stop(void)
+static void __s3c2410wdt_stop(void)
{
unsigned long wtcon;
+ spin_lock(&wdt_lock);
wtcon = readl(wdt_base + S3C2410_WTCON);
wtcon &= ~(S3C2410_WTCON_ENABLE | S3C2410_WTCON_RSTEN);
writel(wtcon, wdt_base + S3C2410_WTCON);
+ spin_unlock(&wdt_lock);
+}
- return 0;
+static void __s3c2410wdt_stop(void)
+{
+ unsigned long wtcon;
+
+ wtcon = readl(wdt_base + S3C2410_WTCON);
+ wtcon &= ~(S3C2410_WTCON_ENABLE | S3C2410_WTCON_RSTEN);
+ writel(wtcon, wdt_base + S3C2410_WTCON);
+}
+
+static void s3c2410wdt_stop(void)
+{
+ spin_lock(&wdt_lock);
+ __s3c2410wdt_stop();
+ spin_unlock(&wdt_lock);
}
-static int s3c2410wdt_start(void)
+static void s3c2410wdt_start(void)
{
unsigned long wtcon;
- s3c2410wdt_stop();
+ spin_lock(&wdt_lock);
+
+ __s3c2410wdt_stop();
wtcon = readl(wdt_base + S3C2410_WTCON);
wtcon |= S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128;
@@ -149,6 +167,7 @@ static int s3c2410wdt_start(void)
writel(wdt_count, wdt_base + S3C2410_WTDAT);
writel(wdt_count, wdt_base + S3C2410_WTCNT);
writel(wtcon, wdt_base + S3C2410_WTCON);
+ spin_unlock(&wdt_lock);
return 0;
}
@@ -211,7 +230,7 @@ static int s3c2410wdt_set_heartbeat(int timeout)
static int s3c2410wdt_open(struct inode *inode, struct file *file)
{
- if(down_trylock(&open_lock))
+ if (test_and_set_bit(0, &open_lock))
return -EBUSY;
if (nowayout)
@@ -231,15 +250,14 @@ static int s3c2410wdt_release(struct inode *inode, struct file *file)
* Lock it in if it's a module and we set nowayout
*/
- if (allow_close == CLOSE_STATE_ALLOW) {
+ if (allow_close == CLOSE_STATE_ALLOW)
s3c2410wdt_stop();
- } else {
+ else {
dev_err(wdt_dev, "Unexpected close, not stopping watchdog\n");
s3c2410wdt_keepalive();
}
-
allow_close = CLOSE_STATE_NOT;
- up(&open_lock);
+ clear_bit(0, &open_lock);
return 0;
}
@@ -249,7 +267,7 @@ static ssize_t s3c2410wdt_write(struct file *file, const char __user *data,
/*
* Refresh the timer.
*/
- if(len) {
+ if (len) {
if (!nowayout) {
size_t i;
@@ -265,7 +283,6 @@ static ssize_t s3c2410wdt_write(struct file *file, const char __user *data,
allow_close = CLOSE_STATE_ALLOW;
}
}
-
s3c2410wdt_keepalive();
}
return len;
@@ -273,48 +290,41 @@ static ssize_t s3c2410wdt_write(struct file *file, const char __user *data,
#define OPTIONS WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE
-static struct watchdog_info s3c2410_wdt_ident = {
+static const struct watchdog_info s3c2410_wdt_ident = {
.options = OPTIONS,
.firmware_version = 0,
.identity = "S3C2410 Watchdog",
};
-static int s3c2410wdt_ioctl(struct inode *inode, struct file *file,
- unsigned int cmd, unsigned long arg)
+static long s3c2410wdt_ioctl(struct file *file, unsigned int cmd,
+ unsigned long arg)
{
void __user *argp = (void __user *)arg;
int __user *p = argp;
int new_margin;
switch (cmd) {
- default:
- return -ENOTTY;
-
- case WDIOC_GETSUPPORT:
- return copy_to_user(argp, &s3c2410_wdt_ident,
- sizeof(s3c2410_wdt_ident)) ? -EFAULT : 0;
-
- case WDIOC_GETSTATUS:
- case WDIOC_GETBOOTSTATUS:
- return put_user(0, p);
-
- case WDIOC_KEEPALIVE:
- s3c2410wdt_keepalive();
- return 0;
-
- case WDIOC_SETTIMEOUT:
- if (get_user(new_margin, p))
- return -EFAULT;
-
- if (s3c2410wdt_set_heartbeat(new_margin))
- return -EINVAL;
-
- s3c2410wdt_keepalive();
- return put_user(tmr_margin, p);
-
- case WDIOC_GETTIMEOUT:
- return put_user(tmr_margin, p);
+ default:
+ return -ENOTTY;
+ case WDIOC_GETSUPPORT:
+ return copy_to_user(argp, &s3c2410_wdt_ident,
+ sizeof(s3c2410_wdt_ident)) ? -EFAULT : 0;
+ case WDIOC_GETSTATUS:
+ case WDIOC_GETBOOTSTATUS:
+ return put_user(0, p);
+ case WDIOC_KEEPALIVE:
+ s3c2410wdt_keepalive();
+ return 0;
+ case WDIOC_SETTIMEOUT:
+ if (get_user(new_margin, p))
+ return -EFAULT;
+ if (s3c2410wdt_set_heartbeat(new_margin))
+ return -EINVAL;
+ s3c2410wdt_keepalive();
+ return put_user(tmr_margin, p);
+ case WDIOC_GETTIMEOUT:
+ return put_user(tmr_margin, p);
}
}
@@ -324,7 +334,7 @@ static const struct file_operations s3c2410wdt_fops = {
.owner = THIS_MODULE,
.llseek = no_llseek,
.write = s3c2410wdt_write,
- .ioctl = s3c2410wdt_ioctl,
+ .unlocked_ioctl = s3c2410wdt_ioctl,
.open = s3c2410wdt_open,
.release = s3c2410wdt_release,
};
@@ -411,14 +421,15 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
* not, try the default value */
if (s3c2410wdt_set_heartbeat(tmr_margin)) {
- started = s3c2410wdt_set_heartbeat(CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME);
+ started = s3c2410wdt_set_heartbeat(
+ CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME);
- if (started == 0) {
- dev_info(dev,"tmr_margin value out of range, default %d used\n",
+ if (started == 0)
+ dev_info(dev,
+ "tmr_margin value out of range, default %d used\n",
CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME);
- } else {
+ else
dev_info(dev, "default timer value is out of range, cannot start\n");
- }
}
ret = misc_register(&s3c2410wdt_miscdev);
@@ -447,7 +458,7 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
(wtcon & S3C2410_WTCON_ENABLE) ? "" : "in",
(wtcon & S3C2410_WTCON_RSTEN) ? "" : "dis",
(wtcon & S3C2410_WTCON_INTEN) ? "" : "en");
-
+
return 0;
err_clk:
@@ -487,7 +498,7 @@ static int s3c2410wdt_remove(struct platform_device *dev)
static void s3c2410wdt_shutdown(struct platform_device *dev)
{
- s3c2410wdt_stop();
+ s3c2410wdt_stop();
}
#ifdef CONFIG_PM
@@ -540,7 +551,8 @@ static struct platform_driver s3c2410wdt_driver = {
};
-static char banner[] __initdata = KERN_INFO "S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics\n";
+static char banner[] __initdata =
+ KERN_INFO "S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics\n";
static int __init watchdog_init(void)
{
next prev parent reply other threads:[~2008-05-19 13:30 UTC|newest]
Thread overview: 72+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-05-19 13:04 [PATCH 00/57] watchdog: Giant scrub Alan Cox
2008-05-19 13:04 ` [PATCH 01/57] Clean acquirewdt and check for BKL dependancies Alan Cox
2008-05-19 13:04 ` [PATCH 02/57] clean up and check advantech watchdog Alan Cox
2008-05-19 13:04 ` [PATCH 03/57] ali: watchdog locking and style Alan Cox
2008-05-19 13:05 ` [PATCH 04/57] AR7 watchdog Alan Cox
2008-05-19 13:05 ` [PATCH 05/57] atp watchdog Alan Cox
2008-05-19 13:05 ` [PATCH 06/57] at91: watchdog to unlocked_ioctl Alan Cox
2008-05-19 13:05 ` [PATCH 07/57] cpu5_wdt: switch " Alan Cox
2008-05-19 13:05 ` [PATCH 08/57] davinci_wdt: unlocked_ioctl and check locking Alan Cox
2008-05-19 13:05 ` [PATCH 09/57] ep93xx_wdt: unlocked_ioctl Alan Cox
2008-05-19 13:05 ` [PATCH 10/57] eurotechwdt: unlocked_ioctl, code lock check and tidy Alan Cox
2008-05-19 13:05 ` [PATCH 11/57] hpwdt: couple of include cleanups Alan Cox
2008-05-19 13:05 ` [PATCH 12/57] ib700wdt: clean up and switch to unlocked_ioctl Alan Cox
2008-05-19 13:05 ` [PATCH 13/57] i6300esb: Style, unlocked_ioctl, cleanup Alan Cox
2008-05-19 13:06 ` [PATCH 14/57] ibmasr: coding style, locking verify Alan Cox
2008-05-20 5:52 ` Andrey Panin
2008-05-19 13:06 ` [PATCH 15/57] indydog: Clean up and tidy Alan Cox
2008-05-19 13:06 ` [PATCH 16/57] iop: watchdog switch to unlocked_ioctl Alan Cox
2008-05-19 13:06 ` [PATCH 17/57] it8712f: unlocked_ioctl Alan Cox
2008-05-19 13:06 ` [PATCH 18/57] iTCO: unlocked_ioctl, coding style and cleanup Alan Cox
2008-05-20 8:26 ` Andrew Morton
2008-05-21 4:26 ` Rusty Russell
2008-05-21 4:36 ` Andrew Morton
2008-05-21 4:58 ` Rusty Russell
2008-05-21 9:29 ` Alan Cox
2008-05-22 5:56 ` Rusty Russell
2008-05-22 6:15 ` Andrew Morton
2008-05-19 13:06 ` [PATCH 19/57] bfin: watchdog cleanup and unlocked_ioctl Alan Cox
2008-05-19 13:06 ` [PATCH 20/57] booke watchdog: clean up " Alan Cox
2008-05-19 13:06 ` [PATCH 21/57] ixp2000_wdt: " Alan Cox
2008-05-19 13:06 ` [PATCH 22/57] ixp4xx_wdt: unlocked_ioctl Alan Cox
2008-05-19 13:06 ` [PATCH 23/57] ks8695_wdt: clean up, coding style, unlocked_ioctl Alan Cox
2008-05-19 13:06 ` [PATCH 24/57] machzwd: " Alan Cox
2008-05-19 13:07 ` [PATCH 25/57] mixcomwd: coding style locking, unlocked_ioctl Alan Cox
2008-05-19 13:07 ` [PATCH 26/57] mpc watchdog: clean up and locking Alan Cox
2008-05-19 13:07 ` [PATCH 27/57] mpcore watchdog: unlocked_ioctl and BKl work Alan Cox
2008-05-19 13:07 ` [PATCH 28/57] mtx-1_wdt: clean up, coding style, unlocked ioctl Alan Cox
2008-05-20 15:08 ` Florian Fainelli
2008-05-19 13:07 ` [PATCH 29/57] mv64x60_wdt: clean up and locking checks Alan Cox
2008-05-19 13:07 ` [PATCH 30/57] omap_wdt: locking, unlocked_ioctl, tidy Alan Cox
2008-05-19 13:07 ` [PATCH 31/57] pc87413_wdt: clean up, coding style, unlocked_ioctl Alan Cox
2008-05-19 13:07 ` [PATCH 32/57] pcwd: clean up, unlocked_ioctl usage Alan Cox
2008-05-19 13:07 ` [PATCH 33/57] pnx4008_wdt: unlocked_ioctl setup Alan Cox
2008-05-19 13:07 ` [PATCH 34/57] rm9k_wdt: clean up Alan Cox
2008-05-19 13:08 ` Alan Cox [this message]
2008-05-19 13:08 ` [PATCH 36/57] sa1100_wdt: Switch to unlocked_ioctl Alan Cox
2008-05-19 13:08 ` [PATCH 37/57] sbc60xxwdt: clean up and switch " Alan Cox
2008-05-19 13:08 ` [PATCH 38/57] stg7240_wdt: unlocked_ioctl Alan Cox
2008-05-19 13:08 ` [PATCH 39/57] sbc8360: clean up Alan Cox
2008-05-19 13:08 ` [PATCH 40/57] sbc_epx_c3_wdt: switch to unlocked_ioctl Alan Cox
2008-05-19 13:08 ` [PATCH 41/57] sb_wdog: Clean up and " Alan Cox
2008-05-19 13:08 ` [PATCH 42/57] sc1200_wdt: clean up, fix locking and use unlocked_ioctl Alan Cox
2008-05-19 13:08 ` [PATCH 43/57] sc520_wdt: Clean up and switch to unlocked_ioctl Alan Cox
2008-05-19 13:08 ` [PATCH 44/57] scx200_wdt: clean " Alan Cox
2008-05-19 13:08 ` [PATCH 45/57] shwdt: coding style, cleanup, " Alan Cox
2008-05-19 13:09 ` [PATCH 46/57] smsc37b787_wdt: coding style, " Alan Cox
2008-05-19 13:09 ` [PATCH 47/57] softdog: clean up, coding style and " Alan Cox
2008-05-19 13:09 ` [PATCH 48/57] txx9: Fix locking, " Alan Cox
2008-05-19 13:09 ` [PATCH 49/57] w83627hf: coding style, clean up and " Alan Cox
2008-05-19 13:09 ` [PATCH 50/57] w83697hf_wdt: cleanup, coding style " Alan Cox
2008-05-19 13:09 ` [PATCH 51/57] w83877f_wdt: clean up code, coding style, " Alan Cox
2008-05-19 13:09 ` [PATCH 52/57] w83977f_wdt: clean up, coding style and " Alan Cox
2008-05-19 13:09 ` [PATCH 53/57] wafer5823wdt: Clean up, coding style, " Alan Cox
2008-05-19 13:09 ` [PATCH 54/57] wdrtas: clean " Alan Cox
2008-05-19 13:09 ` [PATCH 55/57] wdt285: switch to unlocked_ioctl and tidy up oddments of coding style Alan Cox
2008-05-19 13:09 ` [PATCH 56/57] wdt977: clean up, coding style and switch to unlocked_ioctl Alan Cox
2008-05-19 13:10 ` [PATCH 57/57] wdt501/pci: Clean " Alan Cox
2008-05-19 18:21 ` [PATCH 00/57] watchdog: Giant scrub Andrew Morton
2008-05-19 19:51 ` Alan Cox
2008-05-20 8:01 ` Wim Van Sebroeck
2008-05-20 8:37 ` Andrew Morton
2008-05-20 15:34 ` Wim Van Sebroeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080519130759.31722.36146.stgit@core \
--to=alan@lxorguk.ukuu.org.uk \
--cc=akpm@osdl.org \
--cc=linux-kernel@vger.kernel.org \
--cc=wim@iguana.be \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.