From: Alan Cox <alan@lxorguk.ukuu.org.uk>
To: akpm@osdl.org, linux-kernel@vger.kernel.org, wim@iguana.be
Subject: [PATCH 49/57] w83627hf: coding style, clean up and switch to unlocked_ioctl
Date: Mon, 19 May 2008 14:09:18 +0100 [thread overview]
Message-ID: <20080519130918.31722.90335.stgit@core> (raw)
In-Reply-To: <20080519124659.31722.51847.stgit@core>
From: Alan Cox <alan@redhat.com>
---
drivers/watchdog/w83627hf_wdt.c | 175 ++++++++++++++++++---------------------
1 files changed, 83 insertions(+), 92 deletions(-)
diff --git a/drivers/watchdog/w83627hf_wdt.c b/drivers/watchdog/w83627hf_wdt.c
index 3864928..70c843f 100644
--- a/drivers/watchdog/w83627hf_wdt.c
+++ b/drivers/watchdog/w83627hf_wdt.c
@@ -37,9 +37,9 @@
#include <linux/reboot.h>
#include <linux/init.h>
#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
-#include <asm/io.h>
-#include <asm/uaccess.h>
#include <asm/system.h>
#define WATCHDOG_NAME "w83627hf/thf/hg WDT"
@@ -57,22 +57,26 @@ MODULE_PARM_DESC(wdt_io, "w83627hf/thf WDT io port (default 0x2E)");
static int timeout = WATCHDOG_TIMEOUT; /* in seconds */
module_param(timeout, int, 0);
-MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. 1<= timeout <=255, default=" __MODULE_STRING(WATCHDOG_TIMEOUT) ".");
+MODULE_PARM_DESC(timeout,
+ "Watchdog timeout in seconds. 1 <= timeout <= 255, default="
+ __MODULE_STRING(WATCHDOG_TIMEOUT) ".");
static int nowayout = WATCHDOG_NOWAYOUT;
module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+MODULE_PARM_DESC(nowayout,
+ "Watchdog cannot be stopped once started (default="
+ __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
/*
* Kernel methods.
*/
#define WDT_EFER (wdt_io+0) /* Extended Function Enable Registers */
-#define WDT_EFIR (wdt_io+0) /* Extended Function Index Register (same as EFER) */
+#define WDT_EFIR (wdt_io+0) /* Extended Function Index Register
+ (same as EFER) */
#define WDT_EFDR (WDT_EFIR+1) /* Extended Function Data Register */
-static void
-w83627hf_select_wd_register(void)
+static void w83627hf_select_wd_register(void)
{
unsigned char c;
outb_p(0x87, WDT_EFER); /* Enter extended function mode */
@@ -93,43 +97,45 @@ w83627hf_select_wd_register(void)
outb_p(0x01, WDT_EFDR); /* set bit 0 to activate GPIO2 */
}
-static void
-w83627hf_unselect_wd_register(void)
+static void w83627hf_unselect_wd_register(void)
{
outb_p(0xAA, WDT_EFER); /* Leave extended function mode */
}
/* tyan motherboards seem to set F5 to 0x4C ?
* So explicitly init to appropriate value. */
-static void
-w83627hf_init(void)
+
+static void w83627hf_init(void)
{
unsigned char t;
w83627hf_select_wd_register();
outb_p(0xF6, WDT_EFER); /* Select CRF6 */
- t=inb_p(WDT_EFDR); /* read CRF6 */
+ t = inb_p(WDT_EFDR); /* read CRF6 */
if (t != 0) {
- printk (KERN_INFO PFX "Watchdog already running. Resetting timeout to %d sec\n", timeout);
+ printk(KERN_INFO PFX
+ "Watchdog already running. Resetting timeout to %d sec\n",
+ timeout);
outb_p(timeout, WDT_EFDR); /* Write back to CRF6 */
}
outb_p(0xF5, WDT_EFER); /* Select CRF5 */
- t=inb_p(WDT_EFDR); /* read CRF5 */
- t&=~0x0C; /* set second mode & disable keyboard turning off watchdog */
+ t = inb_p(WDT_EFDR); /* read CRF5 */
+ t &= ~0x0C; /* set second mode & disable keyboard
+ turning off watchdog */
outb_p(t, WDT_EFDR); /* Write back to CRF5 */
outb_p(0xF7, WDT_EFER); /* Select CRF7 */
- t=inb_p(WDT_EFDR); /* read CRF7 */
- t&=~0xC0; /* disable keyboard & mouse turning off watchdog */
+ t = inb_p(WDT_EFDR); /* read CRF7 */
+ t &= ~0xC0; /* disable keyboard & mouse turning off
+ watchdog */
outb_p(t, WDT_EFDR); /* Write back to CRF7 */
w83627hf_unselect_wd_register();
}
-static void
-wdt_ctrl(int timeout)
+static void wdt_ctrl(int timeout)
{
spin_lock(&io_lock);
@@ -143,32 +149,28 @@ wdt_ctrl(int timeout)
spin_unlock(&io_lock);
}
-static int
-wdt_ping(void)
+static int wdt_ping(void)
{
wdt_ctrl(timeout);
return 0;
}
-static int
-wdt_disable(void)
+static int wdt_disable(void)
{
wdt_ctrl(0);
return 0;
}
-static int
-wdt_set_heartbeat(int t)
+static int wdt_set_heartbeat(int t)
{
- if ((t < 1) || (t > 255))
+ if (t < 1 || t > 255)
return -EINVAL;
-
timeout = t;
return 0;
}
-static ssize_t
-wdt_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos)
+static ssize_t wdt_write(struct file *file, const char __user *buf,
+ size_t count, loff_t *ppos)
{
if (count) {
if (!nowayout) {
@@ -189,72 +191,61 @@ wdt_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos)
return count;
}
-static int
-wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
- unsigned long arg)
+static long wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
void __user *argp = (void __user *)arg;
int __user *p = argp;
int new_timeout;
static struct watchdog_info ident = {
- .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE,
+ .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT |
+ WDIOF_MAGICCLOSE,
.firmware_version = 1,
.identity = "W83627HF WDT",
};
switch (cmd) {
case WDIOC_GETSUPPORT:
- if (copy_to_user(argp, &ident, sizeof(ident)))
- return -EFAULT;
- break;
-
+ if (copy_to_user(argp, &ident, sizeof(ident)))
+ return -EFAULT;
+ break;
case WDIOC_GETSTATUS:
case WDIOC_GETBOOTSTATUS:
- return put_user(0, p);
-
+ return put_user(0, p);
case WDIOC_KEEPALIVE:
- wdt_ping();
- break;
-
+ wdt_ping();
+ break;
case WDIOC_SETTIMEOUT:
- if (get_user(new_timeout, p))
- return -EFAULT;
- if (wdt_set_heartbeat(new_timeout))
- return -EINVAL;
- wdt_ping();
- /* Fall */
-
+ if (get_user(new_timeout, p))
+ return -EFAULT;
+ if (wdt_set_heartbeat(new_timeout))
+ return -EINVAL;
+ wdt_ping();
+ /* Fall */
case WDIOC_GETTIMEOUT:
- return put_user(timeout, p);
-
+ return put_user(timeout, p);
case WDIOC_SETOPTIONS:
{
- int options, retval = -EINVAL;
-
- if (get_user(options, p))
- return -EFAULT;
-
- if (options & WDIOS_DISABLECARD) {
- wdt_disable();
- retval = 0;
- }
-
- if (options & WDIOS_ENABLECARD) {
- wdt_ping();
- retval = 0;
- }
+ int options, retval = -EINVAL;
- return retval;
+ if (get_user(options, p))
+ return -EFAULT;
+ if (options & WDIOS_DISABLECARD) {
+ wdt_disable();
+ retval = 0;
+ }
+ if (options & WDIOS_ENABLECARD) {
+ wdt_ping();
+ retval = 0;
+ }
+ return retval;
}
-
default:
- return -ENOTTY;
+ return -ENOTTY;
}
return 0;
}
-static int
-wdt_open(struct inode *inode, struct file *file)
+static int wdt_open(struct inode *inode, struct file *file)
{
if (test_and_set_bit(0, &wdt_is_open))
return -EBUSY;
@@ -266,13 +257,13 @@ wdt_open(struct inode *inode, struct file *file)
return nonseekable_open(inode, file);
}
-static int
-wdt_close(struct inode *inode, struct file *file)
+static int wdt_close(struct inode *inode, struct file *file)
{
- if (expect_close == 42) {
+ if (expect_close == 42)
wdt_disable();
- } else {
- printk(KERN_CRIT PFX "Unexpected close, not stopping watchdog!\n");
+ else {
+ printk(KERN_CRIT PFX
+ "Unexpected close, not stopping watchdog!\n");
wdt_ping();
}
expect_close = 0;
@@ -284,8 +275,7 @@ wdt_close(struct inode *inode, struct file *file)
* Notifier for system down
*/
-static int
-wdt_notify_sys(struct notifier_block *this, unsigned long code,
+static int wdt_notify_sys(struct notifier_block *this, unsigned long code,
void *unused)
{
if (code == SYS_DOWN || code == SYS_HALT) {
@@ -303,7 +293,7 @@ static const struct file_operations wdt_fops = {
.owner = THIS_MODULE,
.llseek = no_llseek,
.write = wdt_write,
- .ioctl = wdt_ioctl,
+ .unlocked_ioctl = wdt_ioctl,
.open = wdt_open,
.release = wdt_close,
};
@@ -323,8 +313,7 @@ static struct notifier_block wdt_notifier = {
.notifier_call = wdt_notify_sys,
};
-static int __init
-wdt_init(void)
+static int __init wdt_init(void)
{
int ret;
@@ -332,12 +321,13 @@ wdt_init(void)
if (wdt_set_heartbeat(timeout)) {
wdt_set_heartbeat(WATCHDOG_TIMEOUT);
- printk (KERN_INFO PFX "timeout value must be 1<=timeout<=255, using %d\n",
- WATCHDOG_TIMEOUT);
+ printk(KERN_INFO PFX
+ "timeout value must be 1 <= timeout <= 255, using %d\n",
+ WATCHDOG_TIMEOUT);
}
if (!request_region(wdt_io, 1, WATCHDOG_NAME)) {
- printk (KERN_ERR PFX "I/O address 0x%04x already in use\n",
+ printk(KERN_ERR PFX "I/O address 0x%04x already in use\n",
wdt_io);
ret = -EIO;
goto out;
@@ -347,20 +337,22 @@ wdt_init(void)
ret = register_reboot_notifier(&wdt_notifier);
if (ret != 0) {
- printk (KERN_ERR PFX "cannot register reboot notifier (err=%d)\n",
- ret);
+ printk(KERN_ERR PFX
+ "cannot register reboot notifier (err=%d)\n", ret);
goto unreg_regions;
}
ret = misc_register(&wdt_miscdev);
if (ret != 0) {
- printk (KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
- WATCHDOG_MINOR, ret);
+ printk(KERN_ERR PFX
+ "cannot register miscdev on minor=%d (err=%d)\n",
+ WATCHDOG_MINOR, ret);
goto unreg_reboot;
}
- printk (KERN_INFO PFX "initialized. timeout=%d sec (nowayout=%d)\n",
- timeout, nowayout);
+ printk(KERN_INFO PFX
+ "initialized. timeout=%d sec (nowayout=%d)\n",
+ timeout, nowayout);
out:
return ret;
@@ -371,12 +363,11 @@ unreg_regions:
goto out;
}
-static void __exit
-wdt_exit(void)
+static void __exit wdt_exit(void)
{
misc_deregister(&wdt_miscdev);
unregister_reboot_notifier(&wdt_notifier);
- release_region(wdt_io,1);
+ release_region(wdt_io, 1);
}
module_init(wdt_init);
next prev parent reply other threads:[~2008-05-19 13:35 UTC|newest]
Thread overview: 72+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-05-19 13:04 [PATCH 00/57] watchdog: Giant scrub Alan Cox
2008-05-19 13:04 ` [PATCH 01/57] Clean acquirewdt and check for BKL dependancies Alan Cox
2008-05-19 13:04 ` [PATCH 02/57] clean up and check advantech watchdog Alan Cox
2008-05-19 13:04 ` [PATCH 03/57] ali: watchdog locking and style Alan Cox
2008-05-19 13:05 ` [PATCH 04/57] AR7 watchdog Alan Cox
2008-05-19 13:05 ` [PATCH 05/57] atp watchdog Alan Cox
2008-05-19 13:05 ` [PATCH 06/57] at91: watchdog to unlocked_ioctl Alan Cox
2008-05-19 13:05 ` [PATCH 07/57] cpu5_wdt: switch " Alan Cox
2008-05-19 13:05 ` [PATCH 08/57] davinci_wdt: unlocked_ioctl and check locking Alan Cox
2008-05-19 13:05 ` [PATCH 09/57] ep93xx_wdt: unlocked_ioctl Alan Cox
2008-05-19 13:05 ` [PATCH 10/57] eurotechwdt: unlocked_ioctl, code lock check and tidy Alan Cox
2008-05-19 13:05 ` [PATCH 11/57] hpwdt: couple of include cleanups Alan Cox
2008-05-19 13:05 ` [PATCH 12/57] ib700wdt: clean up and switch to unlocked_ioctl Alan Cox
2008-05-19 13:05 ` [PATCH 13/57] i6300esb: Style, unlocked_ioctl, cleanup Alan Cox
2008-05-19 13:06 ` [PATCH 14/57] ibmasr: coding style, locking verify Alan Cox
2008-05-20 5:52 ` Andrey Panin
2008-05-19 13:06 ` [PATCH 15/57] indydog: Clean up and tidy Alan Cox
2008-05-19 13:06 ` [PATCH 16/57] iop: watchdog switch to unlocked_ioctl Alan Cox
2008-05-19 13:06 ` [PATCH 17/57] it8712f: unlocked_ioctl Alan Cox
2008-05-19 13:06 ` [PATCH 18/57] iTCO: unlocked_ioctl, coding style and cleanup Alan Cox
2008-05-20 8:26 ` Andrew Morton
2008-05-21 4:26 ` Rusty Russell
2008-05-21 4:36 ` Andrew Morton
2008-05-21 4:58 ` Rusty Russell
2008-05-21 9:29 ` Alan Cox
2008-05-22 5:56 ` Rusty Russell
2008-05-22 6:15 ` Andrew Morton
2008-05-19 13:06 ` [PATCH 19/57] bfin: watchdog cleanup and unlocked_ioctl Alan Cox
2008-05-19 13:06 ` [PATCH 20/57] booke watchdog: clean up " Alan Cox
2008-05-19 13:06 ` [PATCH 21/57] ixp2000_wdt: " Alan Cox
2008-05-19 13:06 ` [PATCH 22/57] ixp4xx_wdt: unlocked_ioctl Alan Cox
2008-05-19 13:06 ` [PATCH 23/57] ks8695_wdt: clean up, coding style, unlocked_ioctl Alan Cox
2008-05-19 13:06 ` [PATCH 24/57] machzwd: " Alan Cox
2008-05-19 13:07 ` [PATCH 25/57] mixcomwd: coding style locking, unlocked_ioctl Alan Cox
2008-05-19 13:07 ` [PATCH 26/57] mpc watchdog: clean up and locking Alan Cox
2008-05-19 13:07 ` [PATCH 27/57] mpcore watchdog: unlocked_ioctl and BKl work Alan Cox
2008-05-19 13:07 ` [PATCH 28/57] mtx-1_wdt: clean up, coding style, unlocked ioctl Alan Cox
2008-05-20 15:08 ` Florian Fainelli
2008-05-19 13:07 ` [PATCH 29/57] mv64x60_wdt: clean up and locking checks Alan Cox
2008-05-19 13:07 ` [PATCH 30/57] omap_wdt: locking, unlocked_ioctl, tidy Alan Cox
2008-05-19 13:07 ` [PATCH 31/57] pc87413_wdt: clean up, coding style, unlocked_ioctl Alan Cox
2008-05-19 13:07 ` [PATCH 32/57] pcwd: clean up, unlocked_ioctl usage Alan Cox
2008-05-19 13:07 ` [PATCH 33/57] pnx4008_wdt: unlocked_ioctl setup Alan Cox
2008-05-19 13:07 ` [PATCH 34/57] rm9k_wdt: clean up Alan Cox
2008-05-19 13:08 ` [PATCH 35/57] s3c2410: watchdog cleanup and switch to unlocked_ioctl Alan Cox
2008-05-19 13:08 ` [PATCH 36/57] sa1100_wdt: Switch " Alan Cox
2008-05-19 13:08 ` [PATCH 37/57] sbc60xxwdt: clean up and switch " Alan Cox
2008-05-19 13:08 ` [PATCH 38/57] stg7240_wdt: unlocked_ioctl Alan Cox
2008-05-19 13:08 ` [PATCH 39/57] sbc8360: clean up Alan Cox
2008-05-19 13:08 ` [PATCH 40/57] sbc_epx_c3_wdt: switch to unlocked_ioctl Alan Cox
2008-05-19 13:08 ` [PATCH 41/57] sb_wdog: Clean up and " Alan Cox
2008-05-19 13:08 ` [PATCH 42/57] sc1200_wdt: clean up, fix locking and use unlocked_ioctl Alan Cox
2008-05-19 13:08 ` [PATCH 43/57] sc520_wdt: Clean up and switch to unlocked_ioctl Alan Cox
2008-05-19 13:08 ` [PATCH 44/57] scx200_wdt: clean " Alan Cox
2008-05-19 13:08 ` [PATCH 45/57] shwdt: coding style, cleanup, " Alan Cox
2008-05-19 13:09 ` [PATCH 46/57] smsc37b787_wdt: coding style, " Alan Cox
2008-05-19 13:09 ` [PATCH 47/57] softdog: clean up, coding style and " Alan Cox
2008-05-19 13:09 ` [PATCH 48/57] txx9: Fix locking, " Alan Cox
2008-05-19 13:09 ` Alan Cox [this message]
2008-05-19 13:09 ` [PATCH 50/57] w83697hf_wdt: cleanup, coding style and " Alan Cox
2008-05-19 13:09 ` [PATCH 51/57] w83877f_wdt: clean up code, coding style, " Alan Cox
2008-05-19 13:09 ` [PATCH 52/57] w83977f_wdt: clean up, coding style and " Alan Cox
2008-05-19 13:09 ` [PATCH 53/57] wafer5823wdt: Clean up, coding style, " Alan Cox
2008-05-19 13:09 ` [PATCH 54/57] wdrtas: clean " Alan Cox
2008-05-19 13:09 ` [PATCH 55/57] wdt285: switch to unlocked_ioctl and tidy up oddments of coding style Alan Cox
2008-05-19 13:09 ` [PATCH 56/57] wdt977: clean up, coding style and switch to unlocked_ioctl Alan Cox
2008-05-19 13:10 ` [PATCH 57/57] wdt501/pci: Clean " Alan Cox
2008-05-19 18:21 ` [PATCH 00/57] watchdog: Giant scrub Andrew Morton
2008-05-19 19:51 ` Alan Cox
2008-05-20 8:01 ` Wim Van Sebroeck
2008-05-20 8:37 ` Andrew Morton
2008-05-20 15:34 ` Wim Van Sebroeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080519130918.31722.90335.stgit@core \
--to=alan@lxorguk.ukuu.org.uk \
--cc=akpm@osdl.org \
--cc=linux-kernel@vger.kernel.org \
--cc=wim@iguana.be \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.