From: Tony Lindgren <tony@atomide.com>
To: "Kamat, Nishant" <nskamat@ti.com>
Cc: linux-omap@vger.kernel.org
Subject: Re: [RESENDING PATCH 4/4] ARM: OMAP: Add ethernet support for OMAPLDP
Date: Wed, 21 May 2008 08:51:56 -0700 [thread overview]
Message-ID: <20080521155155.GA23002@atomide.com> (raw)
In-Reply-To: <6E3DC4E6E09EF440B55B7AD683608D6D03C1A96E@dlee13.ent.ti.com>
* Kamat, Nishant <nskamat@ti.com> [080519 02:50]:
> Tony,
>
> > From: Tony Lindgren [mailto:tony@atomide.com]
> >
> > * Nishant Kamat <nskamat@ti.com> [080515 07:45]:
> >
> > > +#define DEBUG_BASE 0x08000000
> > > +
> > > +#define OMAP34XX_ETHR_START DEBUG_BASE
> > > +#define LDP_SMC911X_CS 1
> > > +#define LDP_SMC911X_GPIO 152
> > > +
> >
> > These redefines will conflict when compiling in support for multiple
> > boards. They should be passed in the platform_data.
> >
>
> If I understand correctly, the problem is about using the same #define
> names as 3430 SDP, right? How about this patch:
Yeah that's the problem. Can you please send the defconfig changes in
a separate patch?
Tony
> ------------------------------------
> From: Nishant Kamat <nskamat@ti.com>
>
> This patch adds ethernet support (smc911x) for OMAP LDP platform.
>
> Signed-off-by: Nishant Kamat <nskamat@ti.com>
> ---
> arch/arm/configs/omap_ldp_defconfig | 164
> ++++++++++++++++++++++++++++++++-
> arch/arm/mach-omap2/board-ldp.c | 51 ++++++++++
> include/asm-arm/arch-omap/board-ldp.h | 4 +
> 3 files changed, 216 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm/configs/omap_ldp_defconfig
> b/arch/arm/configs/omap_ldp_defconfig
> index 9a90975..fb2880b 100644
> --- a/arch/arm/configs/omap_ldp_defconfig
> +++ b/arch/arm/configs/omap_ldp_defconfig
> @@ -1,7 +1,7 @@
> #
> # Automatically generated make config: don't edit
> # Linux kernel version: 2.6.26-rc2-omap1
> -# Thu May 15 19:08:39 2008
> +# Thu May 15 19:09:22 2008
> #
> CONFIG_ARM=y
> CONFIG_SYS_SUPPORTS_APM_EMULATION=y
> @@ -37,8 +37,11 @@ CONFIG_LOCALVERSION_AUTO=y
> CONFIG_SWAP=y
> CONFIG_SYSVIPC=y
> CONFIG_SYSVIPC_SYSCTL=y
> +# CONFIG_POSIX_MQUEUE is not set
> CONFIG_BSD_PROCESS_ACCT=y
> # CONFIG_BSD_PROCESS_ACCT_V3 is not set
> +# CONFIG_TASKSTATS is not set
> +# CONFIG_AUDIT is not set
> # CONFIG_IKCONFIG is not set
> CONFIG_LOG_BUF_SHIFT=14
> # CONFIG_CGROUPS is not set
> @@ -319,7 +322,86 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y
> #
> # Networking
> #
> -# CONFIG_NET is not set
> +CONFIG_NET=y
> +
> +#
> +# Networking options
> +#
> +CONFIG_PACKET=y
> +# CONFIG_PACKET_MMAP is not set
> +CONFIG_UNIX=y
> +CONFIG_XFRM=y
> +# CONFIG_XFRM_USER is not set
> +# CONFIG_XFRM_SUB_POLICY is not set
> +# CONFIG_XFRM_MIGRATE is not set
> +# CONFIG_XFRM_STATISTICS is not set
> +CONFIG_NET_KEY=y
> +# CONFIG_NET_KEY_MIGRATE is not set
> +CONFIG_INET=y
> +# CONFIG_IP_MULTICAST is not set
> +# CONFIG_IP_ADVANCED_ROUTER is not set
> +CONFIG_IP_FIB_HASH=y
> +CONFIG_IP_PNP=y
> +CONFIG_IP_PNP_DHCP=y
> +CONFIG_IP_PNP_BOOTP=y
> +CONFIG_IP_PNP_RARP=y
> +# CONFIG_NET_IPIP is not set
> +# CONFIG_NET_IPGRE is not set
> +# CONFIG_ARPD is not set
> +# CONFIG_SYN_COOKIES is not set
> +# CONFIG_INET_AH is not set
> +# CONFIG_INET_ESP is not set
> +# CONFIG_INET_IPCOMP is not set
> +# CONFIG_INET_XFRM_TUNNEL is not set
> +# CONFIG_INET_TUNNEL is not set
> +CONFIG_INET_XFRM_MODE_TRANSPORT=y
> +CONFIG_INET_XFRM_MODE_TUNNEL=y
> +CONFIG_INET_XFRM_MODE_BEET=y
> +# CONFIG_INET_LRO is not set
> +CONFIG_INET_DIAG=y
> +CONFIG_INET_TCP_DIAG=y
> +# CONFIG_TCP_CONG_ADVANCED is not set
> +CONFIG_TCP_CONG_CUBIC=y
> +CONFIG_DEFAULT_TCP_CONG="cubic"
> +# CONFIG_TCP_MD5SIG is not set
> +# CONFIG_IPV6 is not set
> +# CONFIG_NETWORK_SECMARK is not set
> +# CONFIG_NETFILTER is not set
> +# CONFIG_IP_DCCP is not set
> +# CONFIG_IP_SCTP is not set
> +# CONFIG_TIPC is not set
> +# CONFIG_ATM is not set
> +# CONFIG_BRIDGE is not set
> +# CONFIG_VLAN_8021Q is not set
> +# CONFIG_DECNET is not set
> +# CONFIG_LLC2 is not set
> +# CONFIG_IPX is not set
> +# CONFIG_ATALK is not set
> +# CONFIG_X25 is not set
> +# CONFIG_LAPB is not set
> +# CONFIG_ECONET is not set
> +# CONFIG_WAN_ROUTER is not set
> +# CONFIG_NET_SCHED is not set
> +
> +#
> +# Network testing
> +#
> +# CONFIG_NET_PKTGEN is not set
> +# CONFIG_HAMRADIO is not set
> +# CONFIG_CAN is not set
> +# CONFIG_IRDA is not set
> +# CONFIG_BT is not set
> +# CONFIG_AF_RXRPC is not set
> +
> +#
> +# Wireless
> +#
> +# CONFIG_CFG80211 is not set
> +# CONFIG_WIRELESS_EXT is not set
> +# CONFIG_MAC80211 is not set
> +# CONFIG_IEEE80211 is not set
> +# CONFIG_RFKILL is not set
> +# CONFIG_NET_9P is not set
>
> #
> # Device Drivers
> @@ -335,18 +417,21 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
> # CONFIG_DEBUG_DRIVER is not set
> # CONFIG_DEBUG_DEVRES is not set
> # CONFIG_SYS_HYPERVISOR is not set
> +# CONFIG_CONNECTOR is not set
> # CONFIG_MTD is not set
> # CONFIG_PARPORT is not set
> CONFIG_BLK_DEV=y
> # CONFIG_BLK_DEV_COW_COMMON is not set
> CONFIG_BLK_DEV_LOOP=y
> # CONFIG_BLK_DEV_CRYPTOLOOP is not set
> +# CONFIG_BLK_DEV_NBD is not set
> # CONFIG_BLK_DEV_UB is not set
> CONFIG_BLK_DEV_RAM=y
> CONFIG_BLK_DEV_RAM_COUNT=16
> CONFIG_BLK_DEV_RAM_SIZE=16384
> # CONFIG_BLK_DEV_XIP is not set
> # CONFIG_CDROM_PKTCDVD is not set
> +# CONFIG_ATA_OVER_ETH is not set
> CONFIG_MISC_DEVICES=y
> # CONFIG_EEPROM_93CX6 is not set
> # CONFIG_OMAP_STI is not set
> @@ -388,12 +473,61 @@ CONFIG_SCSI_WAIT_SCAN=m
> #
> # CONFIG_SCSI_SPI_ATTRS is not set
> # CONFIG_SCSI_FC_ATTRS is not set
> +# CONFIG_SCSI_ISCSI_ATTRS is not set
> # CONFIG_SCSI_SAS_LIBSAS is not set
> # CONFIG_SCSI_SRP_ATTRS is not set
> CONFIG_SCSI_LOWLEVEL=y
> +# CONFIG_ISCSI_TCP is not set
> # CONFIG_SCSI_DEBUG is not set
> # CONFIG_ATA is not set
> # CONFIG_MD is not set
> +CONFIG_NETDEVICES=y
> +# CONFIG_NETDEVICES_MULTIQUEUE is not set
> +# CONFIG_DUMMY is not set
> +# CONFIG_BONDING is not set
> +# CONFIG_MACVLAN is not set
> +# CONFIG_EQUALIZER is not set
> +# CONFIG_TUN is not set
> +# CONFIG_VETH is not set
> +# CONFIG_PHYLIB is not set
> +CONFIG_NET_ETHERNET=y
> +CONFIG_MII=y
> +# CONFIG_AX88796 is not set
> +# CONFIG_SMC91X is not set
> +# CONFIG_DM9000 is not set
> +# CONFIG_ENC28J60 is not set
> +CONFIG_SMC911X=y
> +# CONFIG_IBM_NEW_EMAC_ZMII is not set
> +# CONFIG_IBM_NEW_EMAC_RGMII is not set
> +# CONFIG_IBM_NEW_EMAC_TAH is not set
> +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
> +# CONFIG_B44 is not set
> +CONFIG_NETDEV_1000=y
> +# CONFIG_E1000E_ENABLED is not set
> +CONFIG_NETDEV_10000=y
> +
> +#
> +# Wireless LAN
> +#
> +# CONFIG_WLAN_PRE80211 is not set
> +# CONFIG_WLAN_80211 is not set
> +# CONFIG_IWLWIFI_LEDS is not set
> +
> +#
> +# USB Network Adapters
> +#
> +# CONFIG_USB_CATC is not set
> +# CONFIG_USB_KAWETH is not set
> +# CONFIG_USB_PEGASUS is not set
> +# CONFIG_USB_RTL8150 is not set
> +# CONFIG_USB_USBNET is not set
> +# CONFIG_WAN is not set
> +# CONFIG_PPP is not set
> +# CONFIG_SLIP is not set
> +# CONFIG_NETCONSOLE is not set
> +# CONFIG_NETPOLL is not set
> +# CONFIG_NET_POLL_CONTROLLER is not set
> +# CONFIG_ISDN is not set
>
> #
> # Input device support
> @@ -615,6 +749,7 @@ CONFIG_SSB_POSSIBLE=y
> # Multimedia core support
> #
> # CONFIG_VIDEO_DEV is not set
> +# CONFIG_DVB_CORE is not set
>
> #
> # Multimedia drivers
> @@ -926,12 +1061,14 @@ CONFIG_EXT3_FS=y
> CONFIG_JBD=y
> # CONFIG_REISERFS_FS is not set
> # CONFIG_JFS_FS is not set
> -# CONFIG_FS_POSIX_ACL is not set
> +CONFIG_FS_POSIX_ACL=y
> # CONFIG_XFS_FS is not set
> +# CONFIG_OCFS2_FS is not set
> CONFIG_DNOTIFY=y
> CONFIG_INOTIFY=y
> CONFIG_INOTIFY_USER=y
> CONFIG_QUOTA=y
> +# CONFIG_QUOTA_NETLINK_INTERFACE is not set
> CONFIG_PRINT_QUOTA_WARNING=y
> # CONFIG_QFMT_V1 is not set
> CONFIG_QFMT_V2=y
> @@ -985,6 +1122,26 @@ CONFIG_TMPFS=y
> # CONFIG_ROMFS_FS is not set
> # CONFIG_SYSV_FS is not set
> # CONFIG_UFS_FS is not set
> +CONFIG_NETWORK_FILESYSTEMS=y
> +CONFIG_NFS_FS=y
> +CONFIG_NFS_V3=y
> +CONFIG_NFS_V3_ACL=y
> +# CONFIG_NFS_V4 is not set
> +# CONFIG_NFSD is not set
> +CONFIG_ROOT_NFS=y
> +CONFIG_LOCKD=y
> +CONFIG_LOCKD_V4=y
> +CONFIG_NFS_ACL_SUPPORT=y
> +CONFIG_NFS_COMMON=y
> +CONFIG_SUNRPC=y
> +# CONFIG_SUNRPC_BIND34 is not set
> +# CONFIG_RPCSEC_GSS_KRB5 is not set
> +# CONFIG_RPCSEC_GSS_SPKM3 is not set
> +# CONFIG_SMB_FS is not set
> +# CONFIG_CIFS is not set
> +# CONFIG_NCP_FS is not set
> +# CONFIG_CODA_FS is not set
> +# CONFIG_AFS_FS is not set
>
> #
> # Partition Types
> @@ -1047,6 +1204,7 @@ CONFIG_NLS_ISO8859_1=y
> # CONFIG_NLS_KOI8_R is not set
> # CONFIG_NLS_KOI8_U is not set
> # CONFIG_NLS_UTF8 is not set
> +# CONFIG_DLM is not set
>
> #
> # Kernel hacking
> diff --git a/arch/arm/mach-omap2/board-ldp.c
> b/arch/arm/mach-omap2/board-ldp.c
> index 2ac4c9b..f29c62d 100644
> --- a/arch/arm/mach-omap2/board-ldp.c
> +++ b/arch/arm/mach-omap2/board-ldp.c
> @@ -46,6 +46,26 @@
>
> #define TWL4030_MSECURE_GPIO 22
>
> +static struct resource ldp_smc911x_resources[] = {
> + [0] = {
> + .start = LDP_ETHR_START,
> + .end = LDP_ETHR_START + SZ_4K,
> + .flags = IORESOURCE_MEM,
> + },
> + [1] = {
> + .start = 0,
> + .end = 0,
> + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
> + },
> +};
> +
> +static struct platform_device ldp_smc911x_device = {
> + .name = "smc911x",
> + .id = -1,
> + .num_resources = ARRAY_SIZE(ldp_smc911x_resources),
> + .resource = ldp_smc911x_resources,
> +};
> +
> static int ts_gpio;
>
> #ifdef CONFIG_RTC_DRV_TWL4030
> @@ -184,16 +204,47 @@ static struct spi_board_info ldp_spi_board_info[]
> __initdata = {
> };
>
> static struct platform_device *ldp_devices[] __initdata = {
> + &ldp_smc911x_device,
> #ifdef CONFIG_RTC_DRV_TWL4030
> &ldp_twl4030rtc_device,
> #endif
> };
>
> +static inline void __init ldp_init_smc911x(void)
> +{
> + int eth_cs;
> + unsigned long cs_mem_base;
> + int eth_gpio = 0;
> +
> + eth_cs = LDP_SMC911X_CS;
> +
> + if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) {
> + printk(KERN_ERR "Failed to request GPMC mem for
> smc911x\n");
> + return;
> + }
> +
> + ldp_smc911x_resources[0].start = cs_mem_base + 0x0;
> + ldp_smc911x_resources[0].end = cs_mem_base + 0xf;
> + udelay(100);
> +
> + eth_gpio = LDP_SMC911X_GPIO;
> +
> + ldp_smc911x_resources[1].start = OMAP_GPIO_IRQ(eth_gpio);
> +
> + if (omap_request_gpio(eth_gpio) < 0) {
> + printk(KERN_ERR "Failed to request GPIO%d for smc911x
> IRQ\n",
> + eth_gpio);
> + return;
> + }
> + omap_set_gpio_direction(eth_gpio, 1);
> +}
> +
> static void __init omap_ldp_init_irq(void)
> {
> omap2_init_common_hw();
> omap_init_irq();
> omap_gpio_init();
> + ldp_init_smc911x();
> }
>
> static struct omap_uart_config ldp_uart_config __initdata = {
> diff --git a/include/asm-arm/arch-omap/board-ldp.h
> b/include/asm-arm/arch-omap/board-ldp.h
> index b227561..b6197b0 100644
> --- a/include/asm-arm/arch-omap/board-ldp.h
> +++ b/include/asm-arm/arch-omap/board-ldp.h
> @@ -29,6 +29,10 @@
> #ifndef __ASM_ARCH_OMAP_LDP_H
> #define __ASM_ARCH_OMAP_LDP_H
>
> +#define LDP_ETHR_START 0x08000000
> +#define LDP_SMC911X_CS 1
> +#define LDP_SMC911X_GPIO 152
> +
> #define TWL4030_IRQNUM INT_34XX_SYS_NIRQ
>
> #endif /* __ASM_ARCH_OMAP_LDP_H */
> --
> 1.5.3.2
next prev parent reply other threads:[~2008-05-21 15:51 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-05-15 14:42 [RESENDING PATCH 1/4] ARM: OMAP: Add register defines for TWL4030 vaux1 Nishant Kamat
2008-05-15 14:42 ` [RESENDING PATCH 2/4] ARM: OMAP: Add basic board support for OMAP LDP Nishant Kamat
2008-05-15 14:42 ` [RESENDING PATCH 3/4] ARM: OMAP: Add default kernel config " Nishant Kamat
2008-05-15 14:42 ` [RESENDING PATCH 4/4] ARM: OMAP: Add ethernet support " Nishant Kamat
2008-05-16 17:55 ` Tony Lindgren
2008-05-19 9:50 ` [RESENDING PATCH 4/4] ARM: OMAP: Add ethernet support for OMAPLDP Kamat, Nishant
2008-05-21 15:51 ` Tony Lindgren [this message]
2008-05-16 17:54 ` [RESENDING PATCH 3/4] ARM: OMAP: Add default kernel config for OMAP LDP Tony Lindgren
2008-05-16 17:53 ` [RESENDING PATCH 2/4] ARM: OMAP: Add basic board support " Tony Lindgren
2008-05-16 17:52 ` [RESENDING PATCH 1/4] ARM: OMAP: Add register defines for TWL4030 vaux1 Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080521155155.GA23002@atomide.com \
--to=tony@atomide.com \
--cc=linux-omap@vger.kernel.org \
--cc=nskamat@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.