* [RESENDING PATCH 1/4] ARM: OMAP: Add register defines for TWL4030 vaux1 @ 2008-05-15 14:42 Nishant Kamat 2008-05-15 14:42 ` [RESENDING PATCH 2/4] ARM: OMAP: Add basic board support for OMAP LDP Nishant Kamat 2008-05-16 17:52 ` [RESENDING PATCH 1/4] ARM: OMAP: Add register defines for TWL4030 vaux1 Tony Lindgren 0 siblings, 2 replies; 10+ messages in thread From: Nishant Kamat @ 2008-05-15 14:42 UTC (permalink / raw) To: linux-omap; +Cc: Nishant Kamat This patch adds the register defines for TWL4030 VAUX1. Signed-off-by: Nishant Kamat <nskamat@ti.com> --- include/linux/i2c/twl4030.h | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-) diff --git a/include/linux/i2c/twl4030.h b/include/linux/i2c/twl4030.h index 05d07f9..40af46e 100644 --- a/include/linux/i2c/twl4030.h +++ b/include/linux/i2c/twl4030.h @@ -77,6 +77,8 @@ /* Offsets to Power Registers */ #define TWL4030_VDAC_DEV_GRP 0x3B #define TWL4030_VDAC_DEDICATED 0x3E +#define TWL4030_VAUX1_DEV_GRP 0x17 +#define TWL4030_VAUX1_DEDICATED 0x1A #define TWL4030_VAUX2_DEV_GRP 0x1B #define TWL4030_VAUX2_DEDICATED 0x1E #define TWL4030_VAUX3_DEV_GRP 0x1F -- 1.5.3.2 ^ permalink raw reply related [flat|nested] 10+ messages in thread
* [RESENDING PATCH 2/4] ARM: OMAP: Add basic board support for OMAP LDP. 2008-05-15 14:42 [RESENDING PATCH 1/4] ARM: OMAP: Add register defines for TWL4030 vaux1 Nishant Kamat @ 2008-05-15 14:42 ` Nishant Kamat 2008-05-15 14:42 ` [RESENDING PATCH 3/4] ARM: OMAP: Add default kernel config " Nishant Kamat 2008-05-16 17:53 ` [RESENDING PATCH 2/4] ARM: OMAP: Add basic board support " Tony Lindgren 2008-05-16 17:52 ` [RESENDING PATCH 1/4] ARM: OMAP: Add register defines for TWL4030 vaux1 Tony Lindgren 1 sibling, 2 replies; 10+ messages in thread From: Nishant Kamat @ 2008-05-15 14:42 UTC (permalink / raw) To: linux-omap; +Cc: Nishant Kamat This adds basic board support for the OMAP3430 LDP development platform. It adds support for the touchscreen, RTC, UART, USB and MMC - all of which work with little or no changes w.r.t. the OMAP3430 SDP. Signed-off-by: Nishant Kamat <nskamat@ti.com> --- arch/arm/mach-omap2/Kconfig | 4 + arch/arm/mach-omap2/Makefile | 3 + arch/arm/mach-omap2/board-ldp.c | 253 +++++++++++++++++++++++++++++++++ include/asm-arm/arch-omap/board-ldp.h | 34 +++++ include/asm-arm/arch-omap/hardware.h | 4 + 5 files changed, 298 insertions(+), 0 deletions(-) create mode 100644 arch/arm/mach-omap2/board-ldp.c create mode 100644 include/asm-arm/arch-omap/board-ldp.h diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 5c229cc..d38f8ca 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -98,6 +98,10 @@ config MACH_OMAP_2430SDP bool "OMAP 2430 SDP board" depends on ARCH_OMAP2 && ARCH_OMAP2430 +config MACH_OMAP_LDP + bool "OMAP 3 LDP board" + depends on ARCH_OMAP3 && ARCH_OMAP34XX + config MACH_OMAP_2430OSK bool "OMAP 2430 OSK board" depends on ARCH_OMAP2 && ARCH_OMAP24XX diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 552664c..b6eea89 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -44,6 +44,9 @@ obj-$(CONFIG_MACH_OMAP3EVM) += board-omap3evm.o \ obj-$(CONFIG_MACH_OMAP3_BEAGLE) += board-omap3beagle.o \ usb-musb.o usb-ehci.o \ hsmmc.o +obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o \ + hsmmc.o \ + usb-musb.o obj-$(CONFIG_MACH_OMAP_APOLLON) += board-apollon.o \ board-apollon-mmc.o \ board-apollon-keys.o diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c new file mode 100644 index 0000000..2ac4c9b --- /dev/null +++ b/arch/arm/mach-omap2/board-ldp.c @@ -0,0 +1,253 @@ +/* + * linux/arch/arm/mach-omap2/board-ldp.c + * + * Copyright (C) 2008 Texas Instruments Inc. + * Nishant Kamat <nskamat@ti.com> + * + * Modified from mach-omap2/board-3430sdp.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/input.h> +#include <linux/workqueue.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/spi/spi.h> +#include <linux/spi/ads7846.h> +#include <linux/i2c/twl4030.h> +#include <linux/i2c/twl4030-rtc.h> + +#include <asm/hardware.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include <asm/arch/mcspi.h> +#include <asm/arch/gpio.h> +#include <asm/arch/board.h> +#include <asm/arch/common.h> +#include <asm/arch/gpmc.h> +#include <asm/arch/hsmmc.h> +#include <asm/arch/usb-musb.h> + +#include <asm/io.h> +#include <asm/delay.h> +#include <asm/arch/control.h> + +#define ENABLE_VAUX1_DEDICATED 0x03 +#define ENABLE_VAUX1_DEV_GRP 0x20 + +#define TWL4030_MSECURE_GPIO 22 + +static int ts_gpio; + +#ifdef CONFIG_RTC_DRV_TWL4030 +static int twl4030_rtc_init(void) +{ + int ret = 0; + + /* 3430ES2.0 doesn't have msecure/gpio-22 line connected to T2 */ + if (is_device_type_gp() && is_sil_rev_less_than(OMAP3430_REV_ES2_0)) { + u32 msecure_pad_config_reg = omap_ctrl_base_get() + 0xA3C; + int mux_mask = 0x04; + u16 tmp; + + ret = omap_request_gpio(TWL4030_MSECURE_GPIO); + if (ret < 0) { + printk(KERN_ERR "twl4030_rtc_init: can't" + "reserve GPIO:%d !\n", TWL4030_MSECURE_GPIO); + goto out; + } + /* + * TWL4030 will be in secure mode if msecure line from OMAP + * is low. Make msecure line high in order to change the + * TWL4030 RTC time and calender registers. + */ + omap_set_gpio_direction(TWL4030_MSECURE_GPIO, 0); + + tmp = omap_readw(msecure_pad_config_reg); + tmp &= 0xF8; /* To enable mux mode 03/04 = GPIO_RTC */ + tmp |= mux_mask;/* To enable mux mode 03/04 = GPIO_RTC */ + omap_writew(tmp, msecure_pad_config_reg); + + omap_set_gpio_dataout(TWL4030_MSECURE_GPIO, 1); + } +out: + return ret; +} + +static void twl4030_rtc_exit(void) +{ + omap_free_gpio(TWL4030_MSECURE_GPIO); +} + +static struct twl4030rtc_platform_data ldp_twl4030rtc_data = { + .init = &twl4030_rtc_init, + .exit = &twl4030_rtc_exit, +}; + +static struct platform_device ldp_twl4030rtc_device = { + .name = "twl4030_rtc", + .id = -1, + .dev = { + .platform_data = &ldp_twl4030rtc_data, + }, +}; +#endif + +/** + * @brief ads7846_dev_init : Requests & sets GPIO line for pen-irq + * + * @return - void. If request gpio fails then Flag KERN_ERR. + */ +static void ads7846_dev_init(void) +{ + if (omap_request_gpio(ts_gpio) < 0) { + printk(KERN_ERR "can't get ads746 pen down GPIO\n"); + return; + } + + omap_set_gpio_direction(ts_gpio, 1); + + omap_set_gpio_debounce(ts_gpio, 1); + omap_set_gpio_debounce_time(ts_gpio, 0xa); +} + +static int ads7846_get_pendown_state(void) +{ + return !omap_get_gpio_datain(ts_gpio); +} + +/* + * This enable(1)/disable(0) the voltage for TS: uses twl4030 calls + */ +static int ads7846_vaux_control(int vaux_cntrl) +{ + int ret = 0; + +#ifdef CONFIG_TWL4030_CORE + /* check for return value of ldo_use: if success it returns 0 */ + if (vaux_cntrl == VAUX_ENABLE) { + if (ret != twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, + ENABLE_VAUX1_DEDICATED, TWL4030_VAUX1_DEDICATED)) + return -EIO; + if (ret != twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, + ENABLE_VAUX1_DEV_GRP, TWL4030_VAUX1_DEV_GRP)) + return -EIO; + } else if (vaux_cntrl == VAUX_DISABLE) { + if (ret != twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, + 0x00, TWL4030_VAUX1_DEDICATED)) + return -EIO; + if (ret != twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, + 0x00, TWL4030_VAUX1_DEV_GRP)) + return -EIO; + } +#else + ret = -EIO; +#endif + return ret; +} + +static struct ads7846_platform_data tsc2046_config __initdata = { + .get_pendown_state = ads7846_get_pendown_state, + .keep_vref_on = 1, + .vaux_control = ads7846_vaux_control, +}; + + +static struct omap2_mcspi_device_config tsc2046_mcspi_config = { + .turbo_mode = 0, + .single_channel = 1, /* 0: slave, 1: master */ +}; + +static struct spi_board_info ldp_spi_board_info[] __initdata = { + [0] = { + /* + * TSC2046 operates at a max freqency of 2MHz, so + * operate slightly below at 1.5MHz + */ + .modalias = "ads7846", + .bus_num = 1, + .chip_select = 0, + .max_speed_hz = 1500000, + .controller_data = &tsc2046_mcspi_config, + .irq = 0, + .platform_data = &tsc2046_config, + }, +}; + +static struct platform_device *ldp_devices[] __initdata = { +#ifdef CONFIG_RTC_DRV_TWL4030 + &ldp_twl4030rtc_device, +#endif +}; + +static void __init omap_ldp_init_irq(void) +{ + omap2_init_common_hw(); + omap_init_irq(); + omap_gpio_init(); +} + +static struct omap_uart_config ldp_uart_config __initdata = { + .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), +}; + +static struct omap_mmc_config ldp_mmc_config __initdata = { + .mmc [0] = { + .enabled = 1, + .wire4 = 1, + }, +}; + +static struct omap_board_config_kernel ldp_config[] __initdata = { + { OMAP_TAG_UART, &ldp_uart_config }, + { OMAP_TAG_MMC, &ldp_mmc_config }, +}; + +static int __init omap_i2c_init(void) +{ + omap_register_i2c_bus(1, 2600, NULL, 0); + omap_register_i2c_bus(2, 400, NULL, 0); + omap_register_i2c_bus(3, 400, NULL, 0); + return 0; +} + +static void __init omap_ldp_init(void) +{ + platform_add_devices(ldp_devices, ARRAY_SIZE(ldp_devices)); + omap_board_config = ldp_config; + omap_board_config_size = ARRAY_SIZE(ldp_config); + ts_gpio = 54; + ldp_spi_board_info[0].irq = OMAP_GPIO_IRQ(ts_gpio); + spi_register_board_info(ldp_spi_board_info, + ARRAY_SIZE(ldp_spi_board_info)); + ads7846_dev_init(); + omap_serial_init(); + usb_musb_init(); + hsmmc_init(); +} + +static void __init omap_ldp_map_io(void) +{ + omap2_set_globals_343x(); + omap2_map_common_io(); +} +arch_initcall(omap_i2c_init); + +MACHINE_START(OMAP_LDP, "OMAP LDP board") + .phys_io = 0x48000000, + .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = omap_ldp_map_io, + .init_irq = omap_ldp_init_irq, + .init_machine = omap_ldp_init, + .timer = &omap_timer, +MACHINE_END diff --git a/include/asm-arm/arch-omap/board-ldp.h b/include/asm-arm/arch-omap/board-ldp.h new file mode 100644 index 0000000..b227561 --- /dev/null +++ b/include/asm-arm/arch-omap/board-ldp.h @@ -0,0 +1,34 @@ +/* + * linux/include/asm-arm/arch-omap/board-ldp.h + * + * Hardware definitions for TI OMAP3 LDP. + * + * Copyright (C) 2008 Texas Instruments Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ASM_ARCH_OMAP_LDP_H +#define __ASM_ARCH_OMAP_LDP_H + +#define TWL4030_IRQNUM INT_34XX_SYS_NIRQ + +#endif /* __ASM_ARCH_OMAP_LDP_H */ diff --git a/include/asm-arm/arch-omap/hardware.h b/include/asm-arm/arch-omap/hardware.h index 09f8ef8..fed9a76 100644 --- a/include/asm-arm/arch-omap/hardware.h +++ b/include/asm-arm/arch-omap/hardware.h @@ -343,6 +343,10 @@ #include "board-omap3beagle.h" #endif +#ifdef CONFIG_MACH_OMAP_LDP +#include "board-ldp.h" +#endif + #ifdef CONFIG_MACH_OMAP_APOLLON #include "board-apollon.h" #endif -- 1.5.3.2 ^ permalink raw reply related [flat|nested] 10+ messages in thread
* [RESENDING PATCH 3/4] ARM: OMAP: Add default kernel config for OMAP LDP 2008-05-15 14:42 ` [RESENDING PATCH 2/4] ARM: OMAP: Add basic board support for OMAP LDP Nishant Kamat @ 2008-05-15 14:42 ` Nishant Kamat 2008-05-15 14:42 ` [RESENDING PATCH 4/4] ARM: OMAP: Add ethernet support " Nishant Kamat 2008-05-16 17:54 ` [RESENDING PATCH 3/4] ARM: OMAP: Add default kernel config for OMAP LDP Tony Lindgren 2008-05-16 17:53 ` [RESENDING PATCH 2/4] ARM: OMAP: Add basic board support " Tony Lindgren 1 sibling, 2 replies; 10+ messages in thread From: Nishant Kamat @ 2008-05-15 14:42 UTC (permalink / raw) To: linux-omap; +Cc: Nishant Kamat This patch adds a default config for the OMAP LDP platform. It supports UART, touchscreen, RTC, Mentor USB and MMC drivers. Signed-off-by: Nishant Kamat <nskamat@ti.com> --- arch/arm/configs/omap_ldp_defconfig | 1196 +++++++++++++++++++++++++++++++++++ 1 files changed, 1196 insertions(+), 0 deletions(-) create mode 100644 arch/arm/configs/omap_ldp_defconfig diff --git a/arch/arm/configs/omap_ldp_defconfig b/arch/arm/configs/omap_ldp_defconfig new file mode 100644 index 0000000..9a90975 --- /dev/null +++ b/arch/arm/configs/omap_ldp_defconfig @@ -0,0 +1,1196 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.26-rc2-omap1 +# Thu May 15 19:08:39 2008 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ARCH_SUPPORTS_AOUT=y +CONFIG_ZONE_DMA=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +CONFIG_KALLSYMS_EXTRA_PASS=y +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +CONFIG_ARCH_OMAP=y +# CONFIG_ARCH_MSM7X00A is not set + +# +# TI OMAP Implementations +# +CONFIG_ARCH_OMAP_OTG=y +# CONFIG_ARCH_OMAP1 is not set +# CONFIG_ARCH_OMAP2 is not set +CONFIG_ARCH_OMAP3=y + +# +# OMAP Feature Selections +# +CONFIG_OMAP_DEBUG_SRAM_PATCH=y +# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set +# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set +# CONFIG_OMAP_RESET_CLOCKS is not set +CONFIG_OMAP_BOOT_TAG=y +CONFIG_OMAP_BOOT_REASON=y +# CONFIG_OMAP_COMPONENT_VERSION is not set +# CONFIG_OMAP_GPIO_SWITCH is not set +CONFIG_OMAP_MUX=y +CONFIG_OMAP_MUX_DEBUG=y +CONFIG_OMAP_MUX_WARNINGS=y +CONFIG_OMAP_MCBSP=y +# CONFIG_OMAP_MMU_FWK is not set +# CONFIG_OMAP_MBOX_FWK is not set +# CONFIG_OMAP_MPU_TIMER is not set +CONFIG_OMAP_32K_TIMER=y +CONFIG_OMAP_32K_TIMER_HZ=128 +CONFIG_OMAP_DM_TIMER=y +# CONFIG_OMAP_LL_DEBUG_UART1 is not set +# CONFIG_OMAP_LL_DEBUG_UART2 is not set +CONFIG_OMAP_LL_DEBUG_UART3=y +CONFIG_OMAP_SERIAL_WAKE=y +CONFIG_ARCH_OMAP34XX=y +CONFIG_ARCH_OMAP3430=y + +# +# OMAP Board Type +# +CONFIG_MACH_OMAP_LDP=y +# CONFIG_MACH_OMAP_3430SDP is not set +# CONFIG_MACH_OMAP3EVM is not set +# CONFIG_MACH_OMAP3_BEAGLE is not set + +# +# Boot options +# + +# +# Power management +# + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_32v6K=y +CONFIG_CPU_V7=y +CONFIG_CPU_32v7=y +CONFIG_CPU_ABRT_EV7=y +CONFIG_CPU_PABRT_IFAR=y +CONFIG_CPU_CACHE_V7=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V7=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_ARM_THUMBEE is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_HAS_TLS_REG=y +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +# CONFIG_PREEMPT is not set +CONFIG_HZ=128 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set +CONFIG_VFP=y +CONFIG_VFPv3=y +# CONFIG_NEON is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +CONFIG_BINFMT_MISC=y + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +# CONFIG_SUSPEND is not set +# CONFIG_APM_EMULATION is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y + +# +# Networking +# +# CONFIG_NET is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_MTD is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=16384 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_OMAP_STI is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_SCSI_DEBUG is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ADS7846=y +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_TSC2005 is not set +# CONFIG_TOUCHSCREEN_TSC2102 is not set +# CONFIG_TOUCHSCREEN_TSC210X is not set +# CONFIG_TOUCHSCREEN_UCB1400 is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=32 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_DETECT_IRQ=y +CONFIG_SERIAL_8250_RSA=y + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +CONFIG_I2C_OMAP=y +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set +# CONFIG_I2C_PCA_PLATFORM is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_ISP1301_OMAP is not set +# CONFIG_TPS65010 is not set +# CONFIG_SENSORS_TLV320AIC23 is not set +CONFIG_TWL4030_CORE=y +CONFIG_TWL4030_GPIO=y +CONFIG_TWL4030_MADC=y +# CONFIG_TWL4030_USB is not set +# CONFIG_TWL4030_PWRBUTTON is not set +# CONFIG_TWL4030_POWEROFF is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_LP5521 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_BITBANG is not set +CONFIG_SPI_OMAP24XX=y + +# +# SPI Protocol Masters +# +# CONFIG_SPI_AT25 is not set +# CONFIG_SPI_TSC2101 is not set +# CONFIG_SPI_TSC2102 is not set +# CONFIG_SPI_TSC210X is not set +# CONFIG_SPI_TSC2301 is not set +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set +CONFIG_HAVE_GPIO_LIB=y + +# +# GPIO Support +# +# CONFIG_DEBUG_GPIO is not set + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MCP23S08 is not set +CONFIG_W1=y + +# +# 1-wire Bus Masters +# +# CONFIG_W1_MASTER_DS2490 is not set +# CONFIG_W1_MASTER_DS2482 is not set +# CONFIG_W1_MASTER_DS1WM is not set +CONFIG_HDQ_MASTER_OMAP=y +# CONFIG_W1_MASTER_GPIO is not set + +# +# 1-wire Slaves +# +# CONFIG_W1_SLAVE_THERM is not set +# CONFIG_W1_SLAVE_SMEM is not set +# CONFIG_W1_SLAVE_DS2433 is not set +# CONFIG_W1_SLAVE_DS2760 is not set +CONFIG_W1_SLAVE_BQ27000=y +CONFIG_POWER_SUPPLY=y +# CONFIG_POWER_SUPPLY_DEBUG is not set +# CONFIG_PDA_POWER is not set +# CONFIG_BATTERY_DS2760 is not set +# CONFIG_BATTERY_BQ27x00 is not set +# CONFIG_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_OMAP_WATCHDOG=y + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set + +# +# Multimedia drivers +# +CONFIG_DAB=y +# CONFIG_USB_DABUSB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y + +# +# Sound +# +CONFIG_SOUND=y + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=y +# CONFIG_SND_SEQUENCER is not set +# CONFIG_SND_MIXER_OSS is not set +# CONFIG_SND_PCM_OSS is not set +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set + +# +# Generic devices +# +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# ALSA ARM devices +# +# CONFIG_SND_OMAP_AIC23 is not set +# CONFIG_SND_OMAP_TSC2101 is not set +# CONFIG_SND_SX1 is not set +# CONFIG_SND_OMAP_TSC2102 is not set +# CONFIG_SND_OMAP24XX_EAC is not set + +# +# SPI devices +# + +# +# USB devices +# +# CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_CAIAQ is not set + +# +# System on Chip audio support +# +# CONFIG_SND_SOC is not set + +# +# ALSA SoC audio for Freescale SOCs +# + +# +# SoC Audio for the Texas Instruments OMAP +# + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +CONFIG_USB_SUSPEND=y +CONFIG_USB_OTG=y +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_EHCI_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_OHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +CONFIG_USB_MUSB_HDRC=y +CONFIG_USB_MUSB_SOC=y + +# +# OMAP 343x high speed USB support +# +# CONFIG_USB_MUSB_HOST is not set +# CONFIG_USB_MUSB_PERIPHERAL is not set +CONFIG_USB_MUSB_OTG=y +CONFIG_USB_GADGET_MUSB_HDRC=y +CONFIG_USB_MUSB_HDRC_HCD=y +# CONFIG_MUSB_PIO_ONLY is not set +CONFIG_USB_INVENTRA_DMA=y +# CONFIG_USB_TI_CPPI_DMA is not set +CONFIG_USB_MUSB_LOGLEVEL=0 + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +# CONFIG_USB_STORAGE is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_DEBUG=y +CONFIG_USB_GADGET_DEBUG_FILES=y +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_PXA2XX is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +CONFIG_USB_GADGET_DUALSPEED=y +CONFIG_USB_ZERO=m +# CONFIG_USB_ZERO_HNPTEST is not set +# CONFIG_USB_ETH is not set +# CONFIG_USB_GADGETFS is not set +CONFIG_USB_FILE_STORAGE=m +CONFIG_USB_FILE_STORAGE_TEST=y +CONFIG_USB_G_SERIAL=m +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set + +# +# MMC/SD Host Controller Drivers +# +CONFIG_MMC_OMAP_HS=y +# CONFIG_MMC_SPI is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +CONFIG_RTC_DRV_TWL4030=y +# CONFIG_RTC_DRV_S35390A is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_UIO is not set + +# +# CBUS support +# +# CONFIG_CBUS is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +CONFIG_QUOTA=y +CONFIG_PRINT_QUOTA_WARNING=y +# CONFIG_QFMT_V1 is not set +CONFIG_QFMT_V2=y +CONFIG_QUOTACTL=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +CONFIG_FRAME_POINTER=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_STACK_USAGE is not set +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set +# CONFIG_GENERIC_FIND_NEXT_BIT is not set +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +CONFIG_LIBCRC32C=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y -- 1.5.3.2 ^ permalink raw reply related [flat|nested] 10+ messages in thread
* [RESENDING PATCH 4/4] ARM: OMAP: Add ethernet support for OMAP LDP 2008-05-15 14:42 ` [RESENDING PATCH 3/4] ARM: OMAP: Add default kernel config " Nishant Kamat @ 2008-05-15 14:42 ` Nishant Kamat 2008-05-16 17:55 ` Tony Lindgren 2008-05-16 17:54 ` [RESENDING PATCH 3/4] ARM: OMAP: Add default kernel config for OMAP LDP Tony Lindgren 1 sibling, 1 reply; 10+ messages in thread From: Nishant Kamat @ 2008-05-15 14:42 UTC (permalink / raw) To: linux-omap; +Cc: Nishant Kamat This patch adds ethernet support (smc911x) for OMAP LDP platform. Signed-off-by: Nishant Kamat <nskamat@ti.com> --- arch/arm/configs/omap_ldp_defconfig | 164 ++++++++++++++++++++++++++++++++- arch/arm/mach-omap2/board-ldp.c | 51 ++++++++++ include/asm-arm/arch-omap/board-ldp.h | 6 + 3 files changed, 218 insertions(+), 3 deletions(-) diff --git a/arch/arm/configs/omap_ldp_defconfig b/arch/arm/configs/omap_ldp_defconfig index 9a90975..fb2880b 100644 --- a/arch/arm/configs/omap_ldp_defconfig +++ b/arch/arm/configs/omap_ldp_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit # Linux kernel version: 2.6.26-rc2-omap1 -# Thu May 15 19:08:39 2008 +# Thu May 15 19:09:22 2008 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -37,8 +37,11 @@ CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set @@ -319,7 +322,86 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y # # Networking # -# CONFIG_NET is not set +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +CONFIG_NET_KEY=y +# CONFIG_NET_KEY_MIGRATE is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -335,18 +417,21 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set # CONFIG_MTD is not set # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=16384 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_OMAP_STI is not set @@ -388,12 +473,61 @@ CONFIG_SCSI_WAIT_SCAN=m # # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_ATA is not set # CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_ENC28J60 is not set +CONFIG_SMC911X=y +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +CONFIG_NETDEV_1000=y +# CONFIG_E1000E_ENABLED is not set +CONFIG_NETDEV_10000=y + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set # # Input device support @@ -615,6 +749,7 @@ CONFIG_SSB_POSSIBLE=y # Multimedia core support # # CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set # # Multimedia drivers @@ -926,12 +1061,14 @@ CONFIG_EXT3_FS=y CONFIG_JBD=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set +CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y CONFIG_QUOTA=y +# CONFIG_QUOTA_NETLINK_INTERFACE is not set CONFIG_PRINT_QUOTA_WARNING=y # CONFIG_QFMT_V1 is not set CONFIG_QFMT_V2=y @@ -985,6 +1122,26 @@ CONFIG_TMPFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +# CONFIG_NFS_V4 is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_ACL_SUPPORT=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set # # Partition Types @@ -1047,6 +1204,7 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set # # Kernel hacking diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index 2ac4c9b..47e86bf 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -46,6 +46,26 @@ #define TWL4030_MSECURE_GPIO 22 +static struct resource ldp_smc911x_resources[] = { + [0] = { + .start = OMAP34XX_ETHR_START, + .end = OMAP34XX_ETHR_START + SZ_4K, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 0, + .end = 0, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, + }, +}; + +static struct platform_device ldp_smc911x_device = { + .name = "smc911x", + .id = -1, + .num_resources = ARRAY_SIZE(ldp_smc911x_resources), + .resource = ldp_smc911x_resources, +}; + static int ts_gpio; #ifdef CONFIG_RTC_DRV_TWL4030 @@ -184,16 +204,47 @@ static struct spi_board_info ldp_spi_board_info[] __initdata = { }; static struct platform_device *ldp_devices[] __initdata = { + &ldp_smc911x_device, #ifdef CONFIG_RTC_DRV_TWL4030 &ldp_twl4030rtc_device, #endif }; +static inline void __init ldp_init_smc911x(void) +{ + int eth_cs; + unsigned long cs_mem_base; + int eth_gpio = 0; + + eth_cs = LDP_SMC911X_CS; + + if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) { + printk(KERN_ERR "Failed to request GPMC mem for smc911x\n"); + return; + } + + ldp_smc911x_resources[0].start = cs_mem_base + 0x0; + ldp_smc911x_resources[0].end = cs_mem_base + 0xf; + udelay(100); + + eth_gpio = LDP_SMC911X_GPIO; + + ldp_smc911x_resources[1].start = OMAP_GPIO_IRQ(eth_gpio); + + if (omap_request_gpio(eth_gpio) < 0) { + printk(KERN_ERR "Failed to request GPIO%d for smc911x IRQ\n", + eth_gpio); + return; + } + omap_set_gpio_direction(eth_gpio, 1); +} + static void __init omap_ldp_init_irq(void) { omap2_init_common_hw(); omap_init_irq(); omap_gpio_init(); + ldp_init_smc911x(); } static struct omap_uart_config ldp_uart_config __initdata = { diff --git a/include/asm-arm/arch-omap/board-ldp.h b/include/asm-arm/arch-omap/board-ldp.h index b227561..97c15d9 100644 --- a/include/asm-arm/arch-omap/board-ldp.h +++ b/include/asm-arm/arch-omap/board-ldp.h @@ -29,6 +29,12 @@ #ifndef __ASM_ARCH_OMAP_LDP_H #define __ASM_ARCH_OMAP_LDP_H +#define DEBUG_BASE 0x08000000 + +#define OMAP34XX_ETHR_START DEBUG_BASE +#define LDP_SMC911X_CS 1 +#define LDP_SMC911X_GPIO 152 + #define TWL4030_IRQNUM INT_34XX_SYS_NIRQ #endif /* __ASM_ARCH_OMAP_LDP_H */ -- 1.5.3.2 ^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [RESENDING PATCH 4/4] ARM: OMAP: Add ethernet support for OMAP LDP 2008-05-15 14:42 ` [RESENDING PATCH 4/4] ARM: OMAP: Add ethernet support " Nishant Kamat @ 2008-05-16 17:55 ` Tony Lindgren 2008-05-19 9:50 ` [RESENDING PATCH 4/4] ARM: OMAP: Add ethernet support for OMAPLDP Kamat, Nishant 0 siblings, 1 reply; 10+ messages in thread From: Tony Lindgren @ 2008-05-16 17:55 UTC (permalink / raw) To: Nishant Kamat; +Cc: linux-omap * Nishant Kamat <nskamat@ti.com> [080515 07:45]: > This patch adds ethernet support (smc911x) for OMAP LDP platform. > > Signed-off-by: Nishant Kamat <nskamat@ti.com> > --- > arch/arm/configs/omap_ldp_defconfig | 164 ++++++++++++++++++++++++++++++++- > arch/arm/mach-omap2/board-ldp.c | 51 ++++++++++ > include/asm-arm/arch-omap/board-ldp.h | 6 + > 3 files changed, 218 insertions(+), 3 deletions(-) > <snip> > diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c > index 2ac4c9b..47e86bf 100644 > --- a/arch/arm/mach-omap2/board-ldp.c > +++ b/arch/arm/mach-omap2/board-ldp.c > @@ -46,6 +46,26 @@ > > #define TWL4030_MSECURE_GPIO 22 > > +static struct resource ldp_smc911x_resources[] = { > + [0] = { > + .start = OMAP34XX_ETHR_START, > + .end = OMAP34XX_ETHR_START + SZ_4K, > + .flags = IORESOURCE_MEM, > + }, > + [1] = { > + .start = 0, > + .end = 0, > + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, > + }, > +}; > + > +static struct platform_device ldp_smc911x_device = { > + .name = "smc911x", > + .id = -1, > + .num_resources = ARRAY_SIZE(ldp_smc911x_resources), > + .resource = ldp_smc911x_resources, > +}; > + > static int ts_gpio; > > #ifdef CONFIG_RTC_DRV_TWL4030 > @@ -184,16 +204,47 @@ static struct spi_board_info ldp_spi_board_info[] __initdata = { > }; > > static struct platform_device *ldp_devices[] __initdata = { > + &ldp_smc911x_device, > #ifdef CONFIG_RTC_DRV_TWL4030 > &ldp_twl4030rtc_device, > #endif > }; > > +static inline void __init ldp_init_smc911x(void) > +{ > + int eth_cs; > + unsigned long cs_mem_base; > + int eth_gpio = 0; > + > + eth_cs = LDP_SMC911X_CS; > + > + if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) { > + printk(KERN_ERR "Failed to request GPMC mem for smc911x\n"); > + return; > + } > + > + ldp_smc911x_resources[0].start = cs_mem_base + 0x0; > + ldp_smc911x_resources[0].end = cs_mem_base + 0xf; > + udelay(100); > + > + eth_gpio = LDP_SMC911X_GPIO; > + > + ldp_smc911x_resources[1].start = OMAP_GPIO_IRQ(eth_gpio); > + > + if (omap_request_gpio(eth_gpio) < 0) { > + printk(KERN_ERR "Failed to request GPIO%d for smc911x IRQ\n", > + eth_gpio); > + return; > + } > + omap_set_gpio_direction(eth_gpio, 1); > +} > + > static void __init omap_ldp_init_irq(void) > { > omap2_init_common_hw(); > omap_init_irq(); > omap_gpio_init(); > + ldp_init_smc911x(); > } > > static struct omap_uart_config ldp_uart_config __initdata = { > diff --git a/include/asm-arm/arch-omap/board-ldp.h b/include/asm-arm/arch-omap/board-ldp.h > index b227561..97c15d9 100644 > --- a/include/asm-arm/arch-omap/board-ldp.h > +++ b/include/asm-arm/arch-omap/board-ldp.h > @@ -29,6 +29,12 @@ > #ifndef __ASM_ARCH_OMAP_LDP_H > #define __ASM_ARCH_OMAP_LDP_H > > +#define DEBUG_BASE 0x08000000 > + > +#define OMAP34XX_ETHR_START DEBUG_BASE > +#define LDP_SMC911X_CS 1 > +#define LDP_SMC911X_GPIO 152 > + > #define TWL4030_IRQNUM INT_34XX_SYS_NIRQ > > #endif /* __ASM_ARCH_OMAP_LDP_H */ These redefines will conflict when compiling in support for multiple boards. They should be passed in the platform_data. Tony ^ permalink raw reply [flat|nested] 10+ messages in thread
* RE: [RESENDING PATCH 4/4] ARM: OMAP: Add ethernet support for OMAPLDP 2008-05-16 17:55 ` Tony Lindgren @ 2008-05-19 9:50 ` Kamat, Nishant 2008-05-21 15:51 ` Tony Lindgren 0 siblings, 1 reply; 10+ messages in thread From: Kamat, Nishant @ 2008-05-19 9:50 UTC (permalink / raw) To: Tony Lindgren; +Cc: linux-omap Tony, > From: Tony Lindgren [mailto:tony@atomide.com] > > * Nishant Kamat <nskamat@ti.com> [080515 07:45]: > > > +#define DEBUG_BASE 0x08000000 > > + > > +#define OMAP34XX_ETHR_START DEBUG_BASE > > +#define LDP_SMC911X_CS 1 > > +#define LDP_SMC911X_GPIO 152 > > + > > These redefines will conflict when compiling in support for multiple > boards. They should be passed in the platform_data. > If I understand correctly, the problem is about using the same #define names as 3430 SDP, right? How about this patch: ------------------------------------ From: Nishant Kamat <nskamat@ti.com> This patch adds ethernet support (smc911x) for OMAP LDP platform. Signed-off-by: Nishant Kamat <nskamat@ti.com> --- arch/arm/configs/omap_ldp_defconfig | 164 ++++++++++++++++++++++++++++++++- arch/arm/mach-omap2/board-ldp.c | 51 ++++++++++ include/asm-arm/arch-omap/board-ldp.h | 4 + 3 files changed, 216 insertions(+), 3 deletions(-) diff --git a/arch/arm/configs/omap_ldp_defconfig b/arch/arm/configs/omap_ldp_defconfig index 9a90975..fb2880b 100644 --- a/arch/arm/configs/omap_ldp_defconfig +++ b/arch/arm/configs/omap_ldp_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit # Linux kernel version: 2.6.26-rc2-omap1 -# Thu May 15 19:08:39 2008 +# Thu May 15 19:09:22 2008 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -37,8 +37,11 @@ CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set @@ -319,7 +322,86 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y # # Networking # -# CONFIG_NET is not set +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +CONFIG_NET_KEY=y +# CONFIG_NET_KEY_MIGRATE is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -335,18 +417,21 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set # CONFIG_MTD is not set # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=16384 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_OMAP_STI is not set @@ -388,12 +473,61 @@ CONFIG_SCSI_WAIT_SCAN=m # # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_ATA is not set # CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_ENC28J60 is not set +CONFIG_SMC911X=y +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +CONFIG_NETDEV_1000=y +# CONFIG_E1000E_ENABLED is not set +CONFIG_NETDEV_10000=y + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set # # Input device support @@ -615,6 +749,7 @@ CONFIG_SSB_POSSIBLE=y # Multimedia core support # # CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set # # Multimedia drivers @@ -926,12 +1061,14 @@ CONFIG_EXT3_FS=y CONFIG_JBD=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set +CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y CONFIG_QUOTA=y +# CONFIG_QUOTA_NETLINK_INTERFACE is not set CONFIG_PRINT_QUOTA_WARNING=y # CONFIG_QFMT_V1 is not set CONFIG_QFMT_V2=y @@ -985,6 +1122,26 @@ CONFIG_TMPFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +# CONFIG_NFS_V4 is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_ACL_SUPPORT=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set # # Partition Types @@ -1047,6 +1204,7 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set # # Kernel hacking diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index 2ac4c9b..f29c62d 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -46,6 +46,26 @@ #define TWL4030_MSECURE_GPIO 22 +static struct resource ldp_smc911x_resources[] = { + [0] = { + .start = LDP_ETHR_START, + .end = LDP_ETHR_START + SZ_4K, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 0, + .end = 0, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, + }, +}; + +static struct platform_device ldp_smc911x_device = { + .name = "smc911x", + .id = -1, + .num_resources = ARRAY_SIZE(ldp_smc911x_resources), + .resource = ldp_smc911x_resources, +}; + static int ts_gpio; #ifdef CONFIG_RTC_DRV_TWL4030 @@ -184,16 +204,47 @@ static struct spi_board_info ldp_spi_board_info[] __initdata = { }; static struct platform_device *ldp_devices[] __initdata = { + &ldp_smc911x_device, #ifdef CONFIG_RTC_DRV_TWL4030 &ldp_twl4030rtc_device, #endif }; +static inline void __init ldp_init_smc911x(void) +{ + int eth_cs; + unsigned long cs_mem_base; + int eth_gpio = 0; + + eth_cs = LDP_SMC911X_CS; + + if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) { + printk(KERN_ERR "Failed to request GPMC mem for smc911x\n"); + return; + } + + ldp_smc911x_resources[0].start = cs_mem_base + 0x0; + ldp_smc911x_resources[0].end = cs_mem_base + 0xf; + udelay(100); + + eth_gpio = LDP_SMC911X_GPIO; + + ldp_smc911x_resources[1].start = OMAP_GPIO_IRQ(eth_gpio); + + if (omap_request_gpio(eth_gpio) < 0) { + printk(KERN_ERR "Failed to request GPIO%d for smc911x IRQ\n", + eth_gpio); + return; + } + omap_set_gpio_direction(eth_gpio, 1); +} + static void __init omap_ldp_init_irq(void) { omap2_init_common_hw(); omap_init_irq(); omap_gpio_init(); + ldp_init_smc911x(); } static struct omap_uart_config ldp_uart_config __initdata = { diff --git a/include/asm-arm/arch-omap/board-ldp.h b/include/asm-arm/arch-omap/board-ldp.h index b227561..b6197b0 100644 --- a/include/asm-arm/arch-omap/board-ldp.h +++ b/include/asm-arm/arch-omap/board-ldp.h @@ -29,6 +29,10 @@ #ifndef __ASM_ARCH_OMAP_LDP_H #define __ASM_ARCH_OMAP_LDP_H +#define LDP_ETHR_START 0x08000000 +#define LDP_SMC911X_CS 1 +#define LDP_SMC911X_GPIO 152 + #define TWL4030_IRQNUM INT_34XX_SYS_NIRQ #endif /* __ASM_ARCH_OMAP_LDP_H */ -- 1.5.3.2 ^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [RESENDING PATCH 4/4] ARM: OMAP: Add ethernet support for OMAPLDP 2008-05-19 9:50 ` [RESENDING PATCH 4/4] ARM: OMAP: Add ethernet support for OMAPLDP Kamat, Nishant @ 2008-05-21 15:51 ` Tony Lindgren 0 siblings, 0 replies; 10+ messages in thread From: Tony Lindgren @ 2008-05-21 15:51 UTC (permalink / raw) To: Kamat, Nishant; +Cc: linux-omap * Kamat, Nishant <nskamat@ti.com> [080519 02:50]: > Tony, > > > From: Tony Lindgren [mailto:tony@atomide.com] > > > > * Nishant Kamat <nskamat@ti.com> [080515 07:45]: > > > > > +#define DEBUG_BASE 0x08000000 > > > + > > > +#define OMAP34XX_ETHR_START DEBUG_BASE > > > +#define LDP_SMC911X_CS 1 > > > +#define LDP_SMC911X_GPIO 152 > > > + > > > > These redefines will conflict when compiling in support for multiple > > boards. They should be passed in the platform_data. > > > > If I understand correctly, the problem is about using the same #define > names as 3430 SDP, right? How about this patch: Yeah that's the problem. Can you please send the defconfig changes in a separate patch? Tony > ------------------------------------ > From: Nishant Kamat <nskamat@ti.com> > > This patch adds ethernet support (smc911x) for OMAP LDP platform. > > Signed-off-by: Nishant Kamat <nskamat@ti.com> > --- > arch/arm/configs/omap_ldp_defconfig | 164 > ++++++++++++++++++++++++++++++++- > arch/arm/mach-omap2/board-ldp.c | 51 ++++++++++ > include/asm-arm/arch-omap/board-ldp.h | 4 + > 3 files changed, 216 insertions(+), 3 deletions(-) > > diff --git a/arch/arm/configs/omap_ldp_defconfig > b/arch/arm/configs/omap_ldp_defconfig > index 9a90975..fb2880b 100644 > --- a/arch/arm/configs/omap_ldp_defconfig > +++ b/arch/arm/configs/omap_ldp_defconfig > @@ -1,7 +1,7 @@ > # > # Automatically generated make config: don't edit > # Linux kernel version: 2.6.26-rc2-omap1 > -# Thu May 15 19:08:39 2008 > +# Thu May 15 19:09:22 2008 > # > CONFIG_ARM=y > CONFIG_SYS_SUPPORTS_APM_EMULATION=y > @@ -37,8 +37,11 @@ CONFIG_LOCALVERSION_AUTO=y > CONFIG_SWAP=y > CONFIG_SYSVIPC=y > CONFIG_SYSVIPC_SYSCTL=y > +# CONFIG_POSIX_MQUEUE is not set > CONFIG_BSD_PROCESS_ACCT=y > # CONFIG_BSD_PROCESS_ACCT_V3 is not set > +# CONFIG_TASKSTATS is not set > +# CONFIG_AUDIT is not set > # CONFIG_IKCONFIG is not set > CONFIG_LOG_BUF_SHIFT=14 > # CONFIG_CGROUPS is not set > @@ -319,7 +322,86 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y > # > # Networking > # > -# CONFIG_NET is not set > +CONFIG_NET=y > + > +# > +# Networking options > +# > +CONFIG_PACKET=y > +# CONFIG_PACKET_MMAP is not set > +CONFIG_UNIX=y > +CONFIG_XFRM=y > +# CONFIG_XFRM_USER is not set > +# CONFIG_XFRM_SUB_POLICY is not set > +# CONFIG_XFRM_MIGRATE is not set > +# CONFIG_XFRM_STATISTICS is not set > +CONFIG_NET_KEY=y > +# CONFIG_NET_KEY_MIGRATE is not set > +CONFIG_INET=y > +# CONFIG_IP_MULTICAST is not set > +# CONFIG_IP_ADVANCED_ROUTER is not set > +CONFIG_IP_FIB_HASH=y > +CONFIG_IP_PNP=y > +CONFIG_IP_PNP_DHCP=y > +CONFIG_IP_PNP_BOOTP=y > +CONFIG_IP_PNP_RARP=y > +# CONFIG_NET_IPIP is not set > +# CONFIG_NET_IPGRE is not set > +# CONFIG_ARPD is not set > +# CONFIG_SYN_COOKIES is not set > +# CONFIG_INET_AH is not set > +# CONFIG_INET_ESP is not set > +# CONFIG_INET_IPCOMP is not set > +# CONFIG_INET_XFRM_TUNNEL is not set > +# CONFIG_INET_TUNNEL is not set > +CONFIG_INET_XFRM_MODE_TRANSPORT=y > +CONFIG_INET_XFRM_MODE_TUNNEL=y > +CONFIG_INET_XFRM_MODE_BEET=y > +# CONFIG_INET_LRO is not set > +CONFIG_INET_DIAG=y > +CONFIG_INET_TCP_DIAG=y > +# CONFIG_TCP_CONG_ADVANCED is not set > +CONFIG_TCP_CONG_CUBIC=y > +CONFIG_DEFAULT_TCP_CONG="cubic" > +# CONFIG_TCP_MD5SIG is not set > +# CONFIG_IPV6 is not set > +# CONFIG_NETWORK_SECMARK is not set > +# CONFIG_NETFILTER is not set > +# CONFIG_IP_DCCP is not set > +# CONFIG_IP_SCTP is not set > +# CONFIG_TIPC is not set > +# CONFIG_ATM is not set > +# CONFIG_BRIDGE is not set > +# CONFIG_VLAN_8021Q is not set > +# CONFIG_DECNET is not set > +# CONFIG_LLC2 is not set > +# CONFIG_IPX is not set > +# CONFIG_ATALK is not set > +# CONFIG_X25 is not set > +# CONFIG_LAPB is not set > +# CONFIG_ECONET is not set > +# CONFIG_WAN_ROUTER is not set > +# CONFIG_NET_SCHED is not set > + > +# > +# Network testing > +# > +# CONFIG_NET_PKTGEN is not set > +# CONFIG_HAMRADIO is not set > +# CONFIG_CAN is not set > +# CONFIG_IRDA is not set > +# CONFIG_BT is not set > +# CONFIG_AF_RXRPC is not set > + > +# > +# Wireless > +# > +# CONFIG_CFG80211 is not set > +# CONFIG_WIRELESS_EXT is not set > +# CONFIG_MAC80211 is not set > +# CONFIG_IEEE80211 is not set > +# CONFIG_RFKILL is not set > +# CONFIG_NET_9P is not set > > # > # Device Drivers > @@ -335,18 +417,21 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y > # CONFIG_DEBUG_DRIVER is not set > # CONFIG_DEBUG_DEVRES is not set > # CONFIG_SYS_HYPERVISOR is not set > +# CONFIG_CONNECTOR is not set > # CONFIG_MTD is not set > # CONFIG_PARPORT is not set > CONFIG_BLK_DEV=y > # CONFIG_BLK_DEV_COW_COMMON is not set > CONFIG_BLK_DEV_LOOP=y > # CONFIG_BLK_DEV_CRYPTOLOOP is not set > +# CONFIG_BLK_DEV_NBD is not set > # CONFIG_BLK_DEV_UB is not set > CONFIG_BLK_DEV_RAM=y > CONFIG_BLK_DEV_RAM_COUNT=16 > CONFIG_BLK_DEV_RAM_SIZE=16384 > # CONFIG_BLK_DEV_XIP is not set > # CONFIG_CDROM_PKTCDVD is not set > +# CONFIG_ATA_OVER_ETH is not set > CONFIG_MISC_DEVICES=y > # CONFIG_EEPROM_93CX6 is not set > # CONFIG_OMAP_STI is not set > @@ -388,12 +473,61 @@ CONFIG_SCSI_WAIT_SCAN=m > # > # CONFIG_SCSI_SPI_ATTRS is not set > # CONFIG_SCSI_FC_ATTRS is not set > +# CONFIG_SCSI_ISCSI_ATTRS is not set > # CONFIG_SCSI_SAS_LIBSAS is not set > # CONFIG_SCSI_SRP_ATTRS is not set > CONFIG_SCSI_LOWLEVEL=y > +# CONFIG_ISCSI_TCP is not set > # CONFIG_SCSI_DEBUG is not set > # CONFIG_ATA is not set > # CONFIG_MD is not set > +CONFIG_NETDEVICES=y > +# CONFIG_NETDEVICES_MULTIQUEUE is not set > +# CONFIG_DUMMY is not set > +# CONFIG_BONDING is not set > +# CONFIG_MACVLAN is not set > +# CONFIG_EQUALIZER is not set > +# CONFIG_TUN is not set > +# CONFIG_VETH is not set > +# CONFIG_PHYLIB is not set > +CONFIG_NET_ETHERNET=y > +CONFIG_MII=y > +# CONFIG_AX88796 is not set > +# CONFIG_SMC91X is not set > +# CONFIG_DM9000 is not set > +# CONFIG_ENC28J60 is not set > +CONFIG_SMC911X=y > +# CONFIG_IBM_NEW_EMAC_ZMII is not set > +# CONFIG_IBM_NEW_EMAC_RGMII is not set > +# CONFIG_IBM_NEW_EMAC_TAH is not set > +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set > +# CONFIG_B44 is not set > +CONFIG_NETDEV_1000=y > +# CONFIG_E1000E_ENABLED is not set > +CONFIG_NETDEV_10000=y > + > +# > +# Wireless LAN > +# > +# CONFIG_WLAN_PRE80211 is not set > +# CONFIG_WLAN_80211 is not set > +# CONFIG_IWLWIFI_LEDS is not set > + > +# > +# USB Network Adapters > +# > +# CONFIG_USB_CATC is not set > +# CONFIG_USB_KAWETH is not set > +# CONFIG_USB_PEGASUS is not set > +# CONFIG_USB_RTL8150 is not set > +# CONFIG_USB_USBNET is not set > +# CONFIG_WAN is not set > +# CONFIG_PPP is not set > +# CONFIG_SLIP is not set > +# CONFIG_NETCONSOLE is not set > +# CONFIG_NETPOLL is not set > +# CONFIG_NET_POLL_CONTROLLER is not set > +# CONFIG_ISDN is not set > > # > # Input device support > @@ -615,6 +749,7 @@ CONFIG_SSB_POSSIBLE=y > # Multimedia core support > # > # CONFIG_VIDEO_DEV is not set > +# CONFIG_DVB_CORE is not set > > # > # Multimedia drivers > @@ -926,12 +1061,14 @@ CONFIG_EXT3_FS=y > CONFIG_JBD=y > # CONFIG_REISERFS_FS is not set > # CONFIG_JFS_FS is not set > -# CONFIG_FS_POSIX_ACL is not set > +CONFIG_FS_POSIX_ACL=y > # CONFIG_XFS_FS is not set > +# CONFIG_OCFS2_FS is not set > CONFIG_DNOTIFY=y > CONFIG_INOTIFY=y > CONFIG_INOTIFY_USER=y > CONFIG_QUOTA=y > +# CONFIG_QUOTA_NETLINK_INTERFACE is not set > CONFIG_PRINT_QUOTA_WARNING=y > # CONFIG_QFMT_V1 is not set > CONFIG_QFMT_V2=y > @@ -985,6 +1122,26 @@ CONFIG_TMPFS=y > # CONFIG_ROMFS_FS is not set > # CONFIG_SYSV_FS is not set > # CONFIG_UFS_FS is not set > +CONFIG_NETWORK_FILESYSTEMS=y > +CONFIG_NFS_FS=y > +CONFIG_NFS_V3=y > +CONFIG_NFS_V3_ACL=y > +# CONFIG_NFS_V4 is not set > +# CONFIG_NFSD is not set > +CONFIG_ROOT_NFS=y > +CONFIG_LOCKD=y > +CONFIG_LOCKD_V4=y > +CONFIG_NFS_ACL_SUPPORT=y > +CONFIG_NFS_COMMON=y > +CONFIG_SUNRPC=y > +# CONFIG_SUNRPC_BIND34 is not set > +# CONFIG_RPCSEC_GSS_KRB5 is not set > +# CONFIG_RPCSEC_GSS_SPKM3 is not set > +# CONFIG_SMB_FS is not set > +# CONFIG_CIFS is not set > +# CONFIG_NCP_FS is not set > +# CONFIG_CODA_FS is not set > +# CONFIG_AFS_FS is not set > > # > # Partition Types > @@ -1047,6 +1204,7 @@ CONFIG_NLS_ISO8859_1=y > # CONFIG_NLS_KOI8_R is not set > # CONFIG_NLS_KOI8_U is not set > # CONFIG_NLS_UTF8 is not set > +# CONFIG_DLM is not set > > # > # Kernel hacking > diff --git a/arch/arm/mach-omap2/board-ldp.c > b/arch/arm/mach-omap2/board-ldp.c > index 2ac4c9b..f29c62d 100644 > --- a/arch/arm/mach-omap2/board-ldp.c > +++ b/arch/arm/mach-omap2/board-ldp.c > @@ -46,6 +46,26 @@ > > #define TWL4030_MSECURE_GPIO 22 > > +static struct resource ldp_smc911x_resources[] = { > + [0] = { > + .start = LDP_ETHR_START, > + .end = LDP_ETHR_START + SZ_4K, > + .flags = IORESOURCE_MEM, > + }, > + [1] = { > + .start = 0, > + .end = 0, > + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, > + }, > +}; > + > +static struct platform_device ldp_smc911x_device = { > + .name = "smc911x", > + .id = -1, > + .num_resources = ARRAY_SIZE(ldp_smc911x_resources), > + .resource = ldp_smc911x_resources, > +}; > + > static int ts_gpio; > > #ifdef CONFIG_RTC_DRV_TWL4030 > @@ -184,16 +204,47 @@ static struct spi_board_info ldp_spi_board_info[] > __initdata = { > }; > > static struct platform_device *ldp_devices[] __initdata = { > + &ldp_smc911x_device, > #ifdef CONFIG_RTC_DRV_TWL4030 > &ldp_twl4030rtc_device, > #endif > }; > > +static inline void __init ldp_init_smc911x(void) > +{ > + int eth_cs; > + unsigned long cs_mem_base; > + int eth_gpio = 0; > + > + eth_cs = LDP_SMC911X_CS; > + > + if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) { > + printk(KERN_ERR "Failed to request GPMC mem for > smc911x\n"); > + return; > + } > + > + ldp_smc911x_resources[0].start = cs_mem_base + 0x0; > + ldp_smc911x_resources[0].end = cs_mem_base + 0xf; > + udelay(100); > + > + eth_gpio = LDP_SMC911X_GPIO; > + > + ldp_smc911x_resources[1].start = OMAP_GPIO_IRQ(eth_gpio); > + > + if (omap_request_gpio(eth_gpio) < 0) { > + printk(KERN_ERR "Failed to request GPIO%d for smc911x > IRQ\n", > + eth_gpio); > + return; > + } > + omap_set_gpio_direction(eth_gpio, 1); > +} > + > static void __init omap_ldp_init_irq(void) > { > omap2_init_common_hw(); > omap_init_irq(); > omap_gpio_init(); > + ldp_init_smc911x(); > } > > static struct omap_uart_config ldp_uart_config __initdata = { > diff --git a/include/asm-arm/arch-omap/board-ldp.h > b/include/asm-arm/arch-omap/board-ldp.h > index b227561..b6197b0 100644 > --- a/include/asm-arm/arch-omap/board-ldp.h > +++ b/include/asm-arm/arch-omap/board-ldp.h > @@ -29,6 +29,10 @@ > #ifndef __ASM_ARCH_OMAP_LDP_H > #define __ASM_ARCH_OMAP_LDP_H > > +#define LDP_ETHR_START 0x08000000 > +#define LDP_SMC911X_CS 1 > +#define LDP_SMC911X_GPIO 152 > + > #define TWL4030_IRQNUM INT_34XX_SYS_NIRQ > > #endif /* __ASM_ARCH_OMAP_LDP_H */ > -- > 1.5.3.2 ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [RESENDING PATCH 3/4] ARM: OMAP: Add default kernel config for OMAP LDP 2008-05-15 14:42 ` [RESENDING PATCH 3/4] ARM: OMAP: Add default kernel config " Nishant Kamat 2008-05-15 14:42 ` [RESENDING PATCH 4/4] ARM: OMAP: Add ethernet support " Nishant Kamat @ 2008-05-16 17:54 ` Tony Lindgren 1 sibling, 0 replies; 10+ messages in thread From: Tony Lindgren @ 2008-05-16 17:54 UTC (permalink / raw) To: Nishant Kamat; +Cc: linux-omap * Nishant Kamat <nskamat@ti.com> [080515 07:45]: > This patch adds a default config for the OMAP LDP platform. It supports > UART, touchscreen, RTC, Mentor USB and MMC drivers. Pushing. Tony > > Signed-off-by: Nishant Kamat <nskamat@ti.com> > --- > arch/arm/configs/omap_ldp_defconfig | 1196 +++++++++++++++++++++++++++++++++++ > 1 files changed, 1196 insertions(+), 0 deletions(-) > create mode 100644 arch/arm/configs/omap_ldp_defconfig > > diff --git a/arch/arm/configs/omap_ldp_defconfig b/arch/arm/configs/omap_ldp_defconfig > new file mode 100644 > index 0000000..9a90975 > --- /dev/null > +++ b/arch/arm/configs/omap_ldp_defconfig > @@ -0,0 +1,1196 @@ > +# > +# Automatically generated make config: don't edit > +# Linux kernel version: 2.6.26-rc2-omap1 > +# Thu May 15 19:08:39 2008 > +# > +CONFIG_ARM=y > +CONFIG_SYS_SUPPORTS_APM_EMULATION=y > +CONFIG_GENERIC_GPIO=y > +CONFIG_GENERIC_TIME=y > +CONFIG_GENERIC_CLOCKEVENTS=y > +CONFIG_MMU=y > +# CONFIG_NO_IOPORT is not set > +CONFIG_GENERIC_HARDIRQS=y > +CONFIG_STACKTRACE_SUPPORT=y > +CONFIG_LOCKDEP_SUPPORT=y > +CONFIG_TRACE_IRQFLAGS_SUPPORT=y > +CONFIG_HARDIRQS_SW_RESEND=y > +CONFIG_GENERIC_IRQ_PROBE=y > +CONFIG_RWSEM_GENERIC_SPINLOCK=y > +# CONFIG_ARCH_HAS_ILOG2_U32 is not set > +# CONFIG_ARCH_HAS_ILOG2_U64 is not set > +CONFIG_GENERIC_HWEIGHT=y > +CONFIG_GENERIC_CALIBRATE_DELAY=y > +CONFIG_ARCH_SUPPORTS_AOUT=y > +CONFIG_ZONE_DMA=y > +CONFIG_VECTORS_BASE=0xffff0000 > +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" > + > +# > +# General setup > +# > +CONFIG_EXPERIMENTAL=y > +CONFIG_BROKEN_ON_SMP=y > +CONFIG_INIT_ENV_ARG_LIMIT=32 > +CONFIG_LOCALVERSION="" > +CONFIG_LOCALVERSION_AUTO=y > +CONFIG_SWAP=y > +CONFIG_SYSVIPC=y > +CONFIG_SYSVIPC_SYSCTL=y > +CONFIG_BSD_PROCESS_ACCT=y > +# CONFIG_BSD_PROCESS_ACCT_V3 is not set > +# CONFIG_IKCONFIG is not set > +CONFIG_LOG_BUF_SHIFT=14 > +# CONFIG_CGROUPS is not set > +CONFIG_GROUP_SCHED=y > +CONFIG_FAIR_GROUP_SCHED=y > +# CONFIG_RT_GROUP_SCHED is not set > +CONFIG_USER_SCHED=y > +# CONFIG_CGROUP_SCHED is not set > +CONFIG_SYSFS_DEPRECATED=y > +CONFIG_SYSFS_DEPRECATED_V2=y > +# CONFIG_RELAY is not set > +# CONFIG_NAMESPACES is not set > +CONFIG_BLK_DEV_INITRD=y > +CONFIG_INITRAMFS_SOURCE="" > +CONFIG_CC_OPTIMIZE_FOR_SIZE=y > +CONFIG_SYSCTL=y > +CONFIG_EMBEDDED=y > +CONFIG_UID16=y > +# CONFIG_SYSCTL_SYSCALL is not set > +CONFIG_KALLSYMS=y > +# CONFIG_KALLSYMS_ALL is not set > +CONFIG_KALLSYMS_EXTRA_PASS=y > +CONFIG_HOTPLUG=y > +CONFIG_PRINTK=y > +CONFIG_BUG=y > +CONFIG_ELF_CORE=y > +CONFIG_COMPAT_BRK=y > +CONFIG_BASE_FULL=y > +CONFIG_FUTEX=y > +CONFIG_ANON_INODES=y > +CONFIG_EPOLL=y > +CONFIG_SIGNALFD=y > +CONFIG_TIMERFD=y > +CONFIG_EVENTFD=y > +CONFIG_SHMEM=y > +CONFIG_VM_EVENT_COUNTERS=y > +CONFIG_SLAB=y > +# CONFIG_SLUB is not set > +# CONFIG_SLOB is not set > +# CONFIG_PROFILING is not set > +# CONFIG_MARKERS is not set > +CONFIG_HAVE_OPROFILE=y > +# CONFIG_KPROBES is not set > +CONFIG_HAVE_KPROBES=y > +CONFIG_HAVE_KRETPROBES=y > +# CONFIG_HAVE_DMA_ATTRS is not set > +CONFIG_PROC_PAGE_MONITOR=y > +CONFIG_SLABINFO=y > +CONFIG_RT_MUTEXES=y > +# CONFIG_TINY_SHMEM is not set > +CONFIG_BASE_SMALL=0 > +CONFIG_MODULES=y > +# CONFIG_MODULE_FORCE_LOAD is not set > +CONFIG_MODULE_UNLOAD=y > +# CONFIG_MODULE_FORCE_UNLOAD is not set > +CONFIG_MODVERSIONS=y > +CONFIG_MODULE_SRCVERSION_ALL=y > +CONFIG_KMOD=y > +CONFIG_BLOCK=y > +# CONFIG_LBD is not set > +# CONFIG_BLK_DEV_IO_TRACE is not set > +# CONFIG_LSF is not set > +# CONFIG_BLK_DEV_BSG is not set > + > +# > +# IO Schedulers > +# > +CONFIG_IOSCHED_NOOP=y > +CONFIG_IOSCHED_AS=y > +CONFIG_IOSCHED_DEADLINE=y > +CONFIG_IOSCHED_CFQ=y > +CONFIG_DEFAULT_AS=y > +# CONFIG_DEFAULT_DEADLINE is not set > +# CONFIG_DEFAULT_CFQ is not set > +# CONFIG_DEFAULT_NOOP is not set > +CONFIG_DEFAULT_IOSCHED="anticipatory" > +CONFIG_CLASSIC_RCU=y > + > +# > +# System Type > +# > +# CONFIG_ARCH_AAEC2000 is not set > +# CONFIG_ARCH_INTEGRATOR is not set > +# CONFIG_ARCH_REALVIEW is not set > +# CONFIG_ARCH_VERSATILE is not set > +# CONFIG_ARCH_AT91 is not set > +# CONFIG_ARCH_CLPS7500 is not set > +# CONFIG_ARCH_CLPS711X is not set > +# CONFIG_ARCH_CO285 is not set > +# CONFIG_ARCH_EBSA110 is not set > +# CONFIG_ARCH_EP93XX is not set > +# CONFIG_ARCH_FOOTBRIDGE is not set > +# CONFIG_ARCH_NETX is not set > +# CONFIG_ARCH_H720X is not set > +# CONFIG_ARCH_IMX is not set > +# CONFIG_ARCH_IOP13XX is not set > +# CONFIG_ARCH_IOP32X is not set > +# CONFIG_ARCH_IOP33X is not set > +# CONFIG_ARCH_IXP23XX is not set > +# CONFIG_ARCH_IXP2000 is not set > +# CONFIG_ARCH_IXP4XX is not set > +# CONFIG_ARCH_L7200 is not set > +# CONFIG_ARCH_KS8695 is not set > +# CONFIG_ARCH_NS9XXX is not set > +# CONFIG_ARCH_MXC is not set > +# CONFIG_ARCH_ORION5X is not set > +# CONFIG_ARCH_PNX4008 is not set > +# CONFIG_ARCH_PXA is not set > +# CONFIG_ARCH_RPC is not set > +# CONFIG_ARCH_SA1100 is not set > +# CONFIG_ARCH_S3C2410 is not set > +# CONFIG_ARCH_SHARK is not set > +# CONFIG_ARCH_LH7A40X is not set > +# CONFIG_ARCH_DAVINCI is not set > +CONFIG_ARCH_OMAP=y > +# CONFIG_ARCH_MSM7X00A is not set > + > +# > +# TI OMAP Implementations > +# > +CONFIG_ARCH_OMAP_OTG=y > +# CONFIG_ARCH_OMAP1 is not set > +# CONFIG_ARCH_OMAP2 is not set > +CONFIG_ARCH_OMAP3=y > + > +# > +# OMAP Feature Selections > +# > +CONFIG_OMAP_DEBUG_SRAM_PATCH=y > +# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set > +# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set > +# CONFIG_OMAP_RESET_CLOCKS is not set > +CONFIG_OMAP_BOOT_TAG=y > +CONFIG_OMAP_BOOT_REASON=y > +# CONFIG_OMAP_COMPONENT_VERSION is not set > +# CONFIG_OMAP_GPIO_SWITCH is not set > +CONFIG_OMAP_MUX=y > +CONFIG_OMAP_MUX_DEBUG=y > +CONFIG_OMAP_MUX_WARNINGS=y > +CONFIG_OMAP_MCBSP=y > +# CONFIG_OMAP_MMU_FWK is not set > +# CONFIG_OMAP_MBOX_FWK is not set > +# CONFIG_OMAP_MPU_TIMER is not set > +CONFIG_OMAP_32K_TIMER=y > +CONFIG_OMAP_32K_TIMER_HZ=128 > +CONFIG_OMAP_DM_TIMER=y > +# CONFIG_OMAP_LL_DEBUG_UART1 is not set > +# CONFIG_OMAP_LL_DEBUG_UART2 is not set > +CONFIG_OMAP_LL_DEBUG_UART3=y > +CONFIG_OMAP_SERIAL_WAKE=y > +CONFIG_ARCH_OMAP34XX=y > +CONFIG_ARCH_OMAP3430=y > + > +# > +# OMAP Board Type > +# > +CONFIG_MACH_OMAP_LDP=y > +# CONFIG_MACH_OMAP_3430SDP is not set > +# CONFIG_MACH_OMAP3EVM is not set > +# CONFIG_MACH_OMAP3_BEAGLE is not set > + > +# > +# Boot options > +# > + > +# > +# Power management > +# > + > +# > +# Processor Type > +# > +CONFIG_CPU_32=y > +CONFIG_CPU_32v6K=y > +CONFIG_CPU_V7=y > +CONFIG_CPU_32v7=y > +CONFIG_CPU_ABRT_EV7=y > +CONFIG_CPU_PABRT_IFAR=y > +CONFIG_CPU_CACHE_V7=y > +CONFIG_CPU_CACHE_VIPT=y > +CONFIG_CPU_COPY_V6=y > +CONFIG_CPU_TLB_V7=y > +CONFIG_CPU_HAS_ASID=y > +CONFIG_CPU_CP15=y > +CONFIG_CPU_CP15_MMU=y > + > +# > +# Processor Features > +# > +CONFIG_ARM_THUMB=y > +# CONFIG_ARM_THUMBEE is not set > +# CONFIG_CPU_ICACHE_DISABLE is not set > +# CONFIG_CPU_DCACHE_DISABLE is not set > +# CONFIG_CPU_BPREDICT_DISABLE is not set > +CONFIG_HAS_TLS_REG=y > +# CONFIG_OUTER_CACHE is not set > + > +# > +# Bus support > +# > +# CONFIG_PCI_SYSCALL is not set > +# CONFIG_ARCH_SUPPORTS_MSI is not set > +# CONFIG_PCCARD is not set > + > +# > +# Kernel Features > +# > +CONFIG_TICK_ONESHOT=y > +CONFIG_NO_HZ=y > +CONFIG_HIGH_RES_TIMERS=y > +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y > +# CONFIG_PREEMPT is not set > +CONFIG_HZ=128 > +CONFIG_AEABI=y > +CONFIG_OABI_COMPAT=y > +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set > +CONFIG_SELECT_MEMORY_MODEL=y > +CONFIG_FLATMEM_MANUAL=y > +# CONFIG_DISCONTIGMEM_MANUAL is not set > +# CONFIG_SPARSEMEM_MANUAL is not set > +CONFIG_FLATMEM=y > +CONFIG_FLAT_NODE_MEM_MAP=y > +# CONFIG_SPARSEMEM_STATIC is not set > +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set > +CONFIG_PAGEFLAGS_EXTENDED=y > +CONFIG_SPLIT_PTLOCK_CPUS=4 > +# CONFIG_RESOURCES_64BIT is not set > +CONFIG_ZONE_DMA_FLAG=1 > +CONFIG_BOUNCE=y > +CONFIG_VIRT_TO_BUS=y > +# CONFIG_LEDS is not set > +CONFIG_ALIGNMENT_TRAP=y > + > +# > +# Boot options > +# > +CONFIG_ZBOOT_ROM_TEXT=0x0 > +CONFIG_ZBOOT_ROM_BSS=0x0 > +CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8" > +# CONFIG_XIP_KERNEL is not set > +# CONFIG_KEXEC is not set > + > +# > +# CPU Frequency scaling > +# > +# CONFIG_CPU_FREQ is not set > + > +# > +# Floating point emulation > +# > + > +# > +# At least one emulation must be selected > +# > +CONFIG_FPE_NWFPE=y > +# CONFIG_FPE_NWFPE_XP is not set > +# CONFIG_FPE_FASTFPE is not set > +CONFIG_VFP=y > +CONFIG_VFPv3=y > +# CONFIG_NEON is not set > + > +# > +# Userspace binary formats > +# > +CONFIG_BINFMT_ELF=y > +# CONFIG_BINFMT_AOUT is not set > +CONFIG_BINFMT_MISC=y > + > +# > +# Power management options > +# > +CONFIG_PM=y > +# CONFIG_PM_DEBUG is not set > +# CONFIG_SUSPEND is not set > +# CONFIG_APM_EMULATION is not set > +CONFIG_ARCH_SUSPEND_POSSIBLE=y > + > +# > +# Networking > +# > +# CONFIG_NET is not set > + > +# > +# Device Drivers > +# > + > +# > +# Generic Driver Options > +# > +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" > +CONFIG_STANDALONE=y > +CONFIG_PREVENT_FIRMWARE_BUILD=y > +# CONFIG_FW_LOADER is not set > +# CONFIG_DEBUG_DRIVER is not set > +# CONFIG_DEBUG_DEVRES is not set > +# CONFIG_SYS_HYPERVISOR is not set > +# CONFIG_MTD is not set > +# CONFIG_PARPORT is not set > +CONFIG_BLK_DEV=y > +# CONFIG_BLK_DEV_COW_COMMON is not set > +CONFIG_BLK_DEV_LOOP=y > +# CONFIG_BLK_DEV_CRYPTOLOOP is not set > +# CONFIG_BLK_DEV_UB is not set > +CONFIG_BLK_DEV_RAM=y > +CONFIG_BLK_DEV_RAM_COUNT=16 > +CONFIG_BLK_DEV_RAM_SIZE=16384 > +# CONFIG_BLK_DEV_XIP is not set > +# CONFIG_CDROM_PKTCDVD is not set > +CONFIG_MISC_DEVICES=y > +# CONFIG_EEPROM_93CX6 is not set > +# CONFIG_OMAP_STI is not set > +# CONFIG_ENCLOSURE_SERVICES is not set > +CONFIG_HAVE_IDE=y > +# CONFIG_IDE is not set > + > +# > +# SCSI device support > +# > +# CONFIG_RAID_ATTRS is not set > +CONFIG_SCSI=y > +CONFIG_SCSI_DMA=y > +# CONFIG_SCSI_TGT is not set > +# CONFIG_SCSI_NETLINK is not set > +CONFIG_SCSI_PROC_FS=y > + > +# > +# SCSI support type (disk, tape, CD-ROM) > +# > +CONFIG_BLK_DEV_SD=y > +# CONFIG_CHR_DEV_ST is not set > +# CONFIG_CHR_DEV_OSST is not set > +# CONFIG_BLK_DEV_SR is not set > +# CONFIG_CHR_DEV_SG is not set > +# CONFIG_CHR_DEV_SCH is not set > + > +# > +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs > +# > +# CONFIG_SCSI_MULTI_LUN is not set > +# CONFIG_SCSI_CONSTANTS is not set > +# CONFIG_SCSI_LOGGING is not set > +# CONFIG_SCSI_SCAN_ASYNC is not set > +CONFIG_SCSI_WAIT_SCAN=m > + > +# > +# SCSI Transports > +# > +# CONFIG_SCSI_SPI_ATTRS is not set > +# CONFIG_SCSI_FC_ATTRS is not set > +# CONFIG_SCSI_SAS_LIBSAS is not set > +# CONFIG_SCSI_SRP_ATTRS is not set > +CONFIG_SCSI_LOWLEVEL=y > +# CONFIG_SCSI_DEBUG is not set > +# CONFIG_ATA is not set > +# CONFIG_MD is not set > + > +# > +# Input device support > +# > +CONFIG_INPUT=y > +# CONFIG_INPUT_FF_MEMLESS is not set > +# CONFIG_INPUT_POLLDEV is not set > + > +# > +# Userland interfaces > +# > +# CONFIG_INPUT_MOUSEDEV is not set > +# CONFIG_INPUT_JOYDEV is not set > +CONFIG_INPUT_EVDEV=y > +# CONFIG_INPUT_EVBUG is not set > + > +# > +# Input Device Drivers > +# > +# CONFIG_INPUT_KEYBOARD is not set > +# CONFIG_INPUT_MOUSE is not set > +# CONFIG_INPUT_JOYSTICK is not set > +# CONFIG_INPUT_TABLET is not set > +CONFIG_INPUT_TOUCHSCREEN=y > +CONFIG_TOUCHSCREEN_ADS7846=y > +# CONFIG_TOUCHSCREEN_FUJITSU is not set > +# CONFIG_TOUCHSCREEN_GUNZE is not set > +# CONFIG_TOUCHSCREEN_ELO is not set > +# CONFIG_TOUCHSCREEN_MTOUCH is not set > +# CONFIG_TOUCHSCREEN_MK712 is not set > +# CONFIG_TOUCHSCREEN_PENMOUNT is not set > +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set > +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set > +# CONFIG_TOUCHSCREEN_TSC2005 is not set > +# CONFIG_TOUCHSCREEN_TSC2102 is not set > +# CONFIG_TOUCHSCREEN_TSC210X is not set > +# CONFIG_TOUCHSCREEN_UCB1400 is not set > +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set > +# CONFIG_INPUT_MISC is not set > + > +# > +# Hardware I/O ports > +# > +# CONFIG_SERIO is not set > +# CONFIG_GAMEPORT is not set > + > +# > +# Character devices > +# > +CONFIG_VT=y > +CONFIG_VT_CONSOLE=y > +CONFIG_HW_CONSOLE=y > +# CONFIG_VT_HW_CONSOLE_BINDING is not set > +CONFIG_DEVKMEM=y > +# CONFIG_SERIAL_NONSTANDARD is not set > + > +# > +# Serial drivers > +# > +CONFIG_SERIAL_8250=y > +CONFIG_SERIAL_8250_CONSOLE=y > +CONFIG_SERIAL_8250_NR_UARTS=32 > +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 > +CONFIG_SERIAL_8250_EXTENDED=y > +CONFIG_SERIAL_8250_MANY_PORTS=y > +CONFIG_SERIAL_8250_SHARE_IRQ=y > +CONFIG_SERIAL_8250_DETECT_IRQ=y > +CONFIG_SERIAL_8250_RSA=y > + > +# > +# Non-8250 serial port support > +# > +CONFIG_SERIAL_CORE=y > +CONFIG_SERIAL_CORE_CONSOLE=y > +CONFIG_UNIX98_PTYS=y > +# CONFIG_LEGACY_PTYS is not set > +# CONFIG_IPMI_HANDLER is not set > +CONFIG_HW_RANDOM=y > +# CONFIG_NVRAM is not set > +# CONFIG_R3964 is not set > +# CONFIG_RAW_DRIVER is not set > +# CONFIG_TCG_TPM is not set > +CONFIG_I2C=y > +CONFIG_I2C_BOARDINFO=y > +CONFIG_I2C_CHARDEV=y > + > +# > +# I2C Hardware Bus support > +# > +# CONFIG_I2C_GPIO is not set > +# CONFIG_I2C_OCORES is not set > +CONFIG_I2C_OMAP=y > +# CONFIG_I2C_PARPORT_LIGHT is not set > +# CONFIG_I2C_SIMTEC is not set > +# CONFIG_I2C_TAOS_EVM is not set > +# CONFIG_I2C_STUB is not set > +# CONFIG_I2C_TINY_USB is not set > +# CONFIG_I2C_PCA_PLATFORM is not set > + > +# > +# Miscellaneous I2C Chip support > +# > +# CONFIG_DS1682 is not set > +# CONFIG_SENSORS_EEPROM is not set > +# CONFIG_SENSORS_PCF8574 is not set > +# CONFIG_PCF8575 is not set > +# CONFIG_SENSORS_PCF8591 is not set > +# CONFIG_ISP1301_OMAP is not set > +# CONFIG_TPS65010 is not set > +# CONFIG_SENSORS_TLV320AIC23 is not set > +CONFIG_TWL4030_CORE=y > +CONFIG_TWL4030_GPIO=y > +CONFIG_TWL4030_MADC=y > +# CONFIG_TWL4030_USB is not set > +# CONFIG_TWL4030_PWRBUTTON is not set > +# CONFIG_TWL4030_POWEROFF is not set > +# CONFIG_SENSORS_MAX6875 is not set > +# CONFIG_SENSORS_TSL2550 is not set > +# CONFIG_LP5521 is not set > +# CONFIG_I2C_DEBUG_CORE is not set > +# CONFIG_I2C_DEBUG_ALGO is not set > +# CONFIG_I2C_DEBUG_BUS is not set > +# CONFIG_I2C_DEBUG_CHIP is not set > +CONFIG_SPI=y > +# CONFIG_SPI_DEBUG is not set > +CONFIG_SPI_MASTER=y > + > +# > +# SPI Master Controller Drivers > +# > +# CONFIG_SPI_BITBANG is not set > +CONFIG_SPI_OMAP24XX=y > + > +# > +# SPI Protocol Masters > +# > +# CONFIG_SPI_AT25 is not set > +# CONFIG_SPI_TSC2101 is not set > +# CONFIG_SPI_TSC2102 is not set > +# CONFIG_SPI_TSC210X is not set > +# CONFIG_SPI_TSC2301 is not set > +# CONFIG_SPI_SPIDEV is not set > +# CONFIG_SPI_TLE62X0 is not set > +CONFIG_HAVE_GPIO_LIB=y > + > +# > +# GPIO Support > +# > +# CONFIG_DEBUG_GPIO is not set > + > +# > +# I2C GPIO expanders: > +# > +# CONFIG_GPIO_PCA953X is not set > +# CONFIG_GPIO_PCF857X is not set > + > +# > +# SPI GPIO expanders: > +# > +# CONFIG_GPIO_MCP23S08 is not set > +CONFIG_W1=y > + > +# > +# 1-wire Bus Masters > +# > +# CONFIG_W1_MASTER_DS2490 is not set > +# CONFIG_W1_MASTER_DS2482 is not set > +# CONFIG_W1_MASTER_DS1WM is not set > +CONFIG_HDQ_MASTER_OMAP=y > +# CONFIG_W1_MASTER_GPIO is not set > + > +# > +# 1-wire Slaves > +# > +# CONFIG_W1_SLAVE_THERM is not set > +# CONFIG_W1_SLAVE_SMEM is not set > +# CONFIG_W1_SLAVE_DS2433 is not set > +# CONFIG_W1_SLAVE_DS2760 is not set > +CONFIG_W1_SLAVE_BQ27000=y > +CONFIG_POWER_SUPPLY=y > +# CONFIG_POWER_SUPPLY_DEBUG is not set > +# CONFIG_PDA_POWER is not set > +# CONFIG_BATTERY_DS2760 is not set > +# CONFIG_BATTERY_BQ27x00 is not set > +# CONFIG_HWMON is not set > +CONFIG_WATCHDOG=y > +CONFIG_WATCHDOG_NOWAYOUT=y > + > +# > +# Watchdog Device Drivers > +# > +# CONFIG_SOFT_WATCHDOG is not set > +CONFIG_OMAP_WATCHDOG=y > + > +# > +# USB-based Watchdog Cards > +# > +# CONFIG_USBPCWATCHDOG is not set > + > +# > +# Sonics Silicon Backplane > +# > +CONFIG_SSB_POSSIBLE=y > +# CONFIG_SSB is not set > + > +# > +# Multifunction device drivers > +# > +# CONFIG_MFD_SM501 is not set > +# CONFIG_MFD_ASIC3 is not set > +# CONFIG_HTC_EGPIO is not set > +# CONFIG_HTC_PASIC3 is not set > + > +# > +# Multimedia devices > +# > + > +# > +# Multimedia core support > +# > +# CONFIG_VIDEO_DEV is not set > + > +# > +# Multimedia drivers > +# > +CONFIG_DAB=y > +# CONFIG_USB_DABUSB is not set > + > +# > +# Graphics support > +# > +# CONFIG_VGASTATE is not set > +CONFIG_VIDEO_OUTPUT_CONTROL=m > +# CONFIG_FB is not set > +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set > + > +# > +# Display device support > +# > +# CONFIG_DISPLAY_SUPPORT is not set > + > +# > +# Console display driver support > +# > +# CONFIG_VGA_CONSOLE is not set > +CONFIG_DUMMY_CONSOLE=y > + > +# > +# Sound > +# > +CONFIG_SOUND=y > + > +# > +# Advanced Linux Sound Architecture > +# > +CONFIG_SND=y > +# CONFIG_SND_SEQUENCER is not set > +# CONFIG_SND_MIXER_OSS is not set > +# CONFIG_SND_PCM_OSS is not set > +# CONFIG_SND_DYNAMIC_MINORS is not set > +CONFIG_SND_SUPPORT_OLD_API=y > +CONFIG_SND_VERBOSE_PROCFS=y > +# CONFIG_SND_VERBOSE_PRINTK is not set > +# CONFIG_SND_DEBUG is not set > + > +# > +# Generic devices > +# > +# CONFIG_SND_DUMMY is not set > +# CONFIG_SND_MTPAV is not set > +# CONFIG_SND_SERIAL_U16550 is not set > +# CONFIG_SND_MPU401 is not set > + > +# > +# ALSA ARM devices > +# > +# CONFIG_SND_OMAP_AIC23 is not set > +# CONFIG_SND_OMAP_TSC2101 is not set > +# CONFIG_SND_SX1 is not set > +# CONFIG_SND_OMAP_TSC2102 is not set > +# CONFIG_SND_OMAP24XX_EAC is not set > + > +# > +# SPI devices > +# > + > +# > +# USB devices > +# > +# CONFIG_SND_USB_AUDIO is not set > +# CONFIG_SND_USB_CAIAQ is not set > + > +# > +# System on Chip audio support > +# > +# CONFIG_SND_SOC is not set > + > +# > +# ALSA SoC audio for Freescale SOCs > +# > + > +# > +# SoC Audio for the Texas Instruments OMAP > +# > + > +# > +# Open Sound System > +# > +# CONFIG_SOUND_PRIME is not set > +CONFIG_HID_SUPPORT=y > +CONFIG_HID=y > +# CONFIG_HID_DEBUG is not set > +# CONFIG_HIDRAW is not set > + > +# > +# USB Input Devices > +# > +CONFIG_USB_HID=y > +# CONFIG_USB_HIDINPUT_POWERBOOK is not set > +# CONFIG_HID_FF is not set > +# CONFIG_USB_HIDDEV is not set > +CONFIG_USB_SUPPORT=y > +CONFIG_USB_ARCH_HAS_HCD=y > +CONFIG_USB_ARCH_HAS_OHCI=y > +CONFIG_USB_ARCH_HAS_EHCI=y > +CONFIG_USB=y > +# CONFIG_USB_DEBUG is not set > +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set > + > +# > +# Miscellaneous USB options > +# > +CONFIG_USB_DEVICEFS=y > +CONFIG_USB_DEVICE_CLASS=y > +# CONFIG_USB_DYNAMIC_MINORS is not set > +CONFIG_USB_SUSPEND=y > +CONFIG_USB_OTG=y > +# CONFIG_USB_OTG_WHITELIST is not set > +# CONFIG_USB_OTG_BLACKLIST_HUB is not set > + > +# > +# USB Host Controller Drivers > +# > +# CONFIG_USB_C67X00_HCD is not set > +# CONFIG_USB_EHCI_HCD is not set > +# CONFIG_USB_ISP116X_HCD is not set > +# CONFIG_USB_ISP1760_HCD is not set > +# CONFIG_USB_OHCI_HCD is not set > +# CONFIG_USB_SL811_HCD is not set > +# CONFIG_USB_R8A66597_HCD is not set > +CONFIG_USB_MUSB_HDRC=y > +CONFIG_USB_MUSB_SOC=y > + > +# > +# OMAP 343x high speed USB support > +# > +# CONFIG_USB_MUSB_HOST is not set > +# CONFIG_USB_MUSB_PERIPHERAL is not set > +CONFIG_USB_MUSB_OTG=y > +CONFIG_USB_GADGET_MUSB_HDRC=y > +CONFIG_USB_MUSB_HDRC_HCD=y > +# CONFIG_MUSB_PIO_ONLY is not set > +CONFIG_USB_INVENTRA_DMA=y > +# CONFIG_USB_TI_CPPI_DMA is not set > +CONFIG_USB_MUSB_LOGLEVEL=0 > + > +# > +# USB Device Class drivers > +# > +# CONFIG_USB_ACM is not set > +# CONFIG_USB_PRINTER is not set > + > +# > +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' > +# > + > +# > +# may also be needed; see USB_STORAGE Help for more information > +# > +# CONFIG_USB_STORAGE is not set > +# CONFIG_USB_LIBUSUAL is not set > + > +# > +# USB Imaging devices > +# > +# CONFIG_USB_MDC800 is not set > +# CONFIG_USB_MICROTEK is not set > +CONFIG_USB_MON=y > + > +# > +# USB port drivers > +# > +# CONFIG_USB_SERIAL is not set > + > +# > +# USB Miscellaneous drivers > +# > +# CONFIG_USB_EMI62 is not set > +# CONFIG_USB_EMI26 is not set > +# CONFIG_USB_ADUTUX is not set > +# CONFIG_USB_AUERSWALD is not set > +# CONFIG_USB_RIO500 is not set > +# CONFIG_USB_LEGOTOWER is not set > +# CONFIG_USB_LCD is not set > +# CONFIG_USB_BERRY_CHARGE is not set > +# CONFIG_USB_LED is not set > +# CONFIG_USB_CYPRESS_CY7C63 is not set > +# CONFIG_USB_CYTHERM is not set > +# CONFIG_USB_PHIDGET is not set > +# CONFIG_USB_IDMOUSE is not set > +# CONFIG_USB_FTDI_ELAN is not set > +# CONFIG_USB_APPLEDISPLAY is not set > +# CONFIG_USB_LD is not set > +# CONFIG_USB_TRANCEVIBRATOR is not set > +# CONFIG_USB_IOWARRIOR is not set > +# CONFIG_USB_TEST is not set > +CONFIG_USB_GADGET=y > +CONFIG_USB_GADGET_DEBUG=y > +CONFIG_USB_GADGET_DEBUG_FILES=y > +CONFIG_USB_GADGET_SELECTED=y > +# CONFIG_USB_GADGET_AMD5536UDC is not set > +# CONFIG_USB_GADGET_ATMEL_USBA is not set > +# CONFIG_USB_GADGET_FSL_USB2 is not set > +# CONFIG_USB_GADGET_NET2280 is not set > +# CONFIG_USB_GADGET_PXA2XX is not set > +# CONFIG_USB_GADGET_M66592 is not set > +# CONFIG_USB_GADGET_PXA27X is not set > +# CONFIG_USB_GADGET_GOKU is not set > +# CONFIG_USB_GADGET_LH7A40X is not set > +# CONFIG_USB_GADGET_OMAP is not set > +# CONFIG_USB_GADGET_S3C2410 is not set > +# CONFIG_USB_GADGET_AT91 is not set > +# CONFIG_USB_GADGET_DUMMY_HCD is not set > +CONFIG_USB_GADGET_DUALSPEED=y > +CONFIG_USB_ZERO=m > +# CONFIG_USB_ZERO_HNPTEST is not set > +# CONFIG_USB_ETH is not set > +# CONFIG_USB_GADGETFS is not set > +CONFIG_USB_FILE_STORAGE=m > +CONFIG_USB_FILE_STORAGE_TEST=y > +CONFIG_USB_G_SERIAL=m > +# CONFIG_USB_MIDI_GADGET is not set > +# CONFIG_USB_G_PRINTER is not set > +CONFIG_MMC=y > +# CONFIG_MMC_DEBUG is not set > +# CONFIG_MMC_UNSAFE_RESUME is not set > + > +# > +# MMC/SD Card Drivers > +# > +CONFIG_MMC_BLOCK=y > +CONFIG_MMC_BLOCK_BOUNCE=y > +# CONFIG_SDIO_UART is not set > + > +# > +# MMC/SD Host Controller Drivers > +# > +CONFIG_MMC_OMAP_HS=y > +# CONFIG_MMC_SPI is not set > +# CONFIG_NEW_LEDS is not set > +CONFIG_RTC_LIB=y > +CONFIG_RTC_CLASS=y > +CONFIG_RTC_HCTOSYS=y > +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" > +# CONFIG_RTC_DEBUG is not set > + > +# > +# RTC interfaces > +# > +CONFIG_RTC_INTF_SYSFS=y > +CONFIG_RTC_INTF_PROC=y > +CONFIG_RTC_INTF_DEV=y > +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set > +# CONFIG_RTC_DRV_TEST is not set > + > +# > +# I2C RTC drivers > +# > +# CONFIG_RTC_DRV_DS1307 is not set > +# CONFIG_RTC_DRV_DS1374 is not set > +# CONFIG_RTC_DRV_DS1672 is not set > +# CONFIG_RTC_DRV_MAX6900 is not set > +# CONFIG_RTC_DRV_RS5C372 is not set > +# CONFIG_RTC_DRV_ISL1208 is not set > +# CONFIG_RTC_DRV_X1205 is not set > +# CONFIG_RTC_DRV_PCF8563 is not set > +# CONFIG_RTC_DRV_PCF8583 is not set > +# CONFIG_RTC_DRV_M41T80 is not set > +CONFIG_RTC_DRV_TWL4030=y > +# CONFIG_RTC_DRV_S35390A is not set > + > +# > +# SPI RTC drivers > +# > +# CONFIG_RTC_DRV_MAX6902 is not set > +# CONFIG_RTC_DRV_R9701 is not set > +# CONFIG_RTC_DRV_RS5C348 is not set > + > +# > +# Platform RTC drivers > +# > +# CONFIG_RTC_DRV_CMOS is not set > +# CONFIG_RTC_DRV_DS1511 is not set > +# CONFIG_RTC_DRV_DS1553 is not set > +# CONFIG_RTC_DRV_DS1742 is not set > +# CONFIG_RTC_DRV_STK17TA8 is not set > +# CONFIG_RTC_DRV_M48T86 is not set > +# CONFIG_RTC_DRV_M48T59 is not set > +# CONFIG_RTC_DRV_V3020 is not set > + > +# > +# on-CPU RTC drivers > +# > +# CONFIG_UIO is not set > + > +# > +# CBUS support > +# > +# CONFIG_CBUS is not set > + > +# > +# File systems > +# > +CONFIG_EXT2_FS=y > +# CONFIG_EXT2_FS_XATTR is not set > +# CONFIG_EXT2_FS_XIP is not set > +CONFIG_EXT3_FS=y > +# CONFIG_EXT3_FS_XATTR is not set > +# CONFIG_EXT4DEV_FS is not set > +CONFIG_JBD=y > +# CONFIG_REISERFS_FS is not set > +# CONFIG_JFS_FS is not set > +# CONFIG_FS_POSIX_ACL is not set > +# CONFIG_XFS_FS is not set > +CONFIG_DNOTIFY=y > +CONFIG_INOTIFY=y > +CONFIG_INOTIFY_USER=y > +CONFIG_QUOTA=y > +CONFIG_PRINT_QUOTA_WARNING=y > +# CONFIG_QFMT_V1 is not set > +CONFIG_QFMT_V2=y > +CONFIG_QUOTACTL=y > +# CONFIG_AUTOFS_FS is not set > +# CONFIG_AUTOFS4_FS is not set > +# CONFIG_FUSE_FS is not set > + > +# > +# CD-ROM/DVD Filesystems > +# > +# CONFIG_ISO9660_FS is not set > +# CONFIG_UDF_FS is not set > + > +# > +# DOS/FAT/NT Filesystems > +# > +CONFIG_FAT_FS=y > +CONFIG_MSDOS_FS=y > +CONFIG_VFAT_FS=y > +CONFIG_FAT_DEFAULT_CODEPAGE=437 > +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" > +# CONFIG_NTFS_FS is not set > + > +# > +# Pseudo filesystems > +# > +CONFIG_PROC_FS=y > +CONFIG_PROC_SYSCTL=y > +CONFIG_SYSFS=y > +CONFIG_TMPFS=y > +# CONFIG_TMPFS_POSIX_ACL is not set > +# CONFIG_HUGETLB_PAGE is not set > +# CONFIG_CONFIGFS_FS is not set > + > +# > +# Miscellaneous filesystems > +# > +# CONFIG_ADFS_FS is not set > +# CONFIG_AFFS_FS is not set > +# CONFIG_HFS_FS is not set > +# CONFIG_HFSPLUS_FS is not set > +# CONFIG_BEFS_FS is not set > +# CONFIG_BFS_FS is not set > +# CONFIG_EFS_FS is not set > +# CONFIG_CRAMFS is not set > +# CONFIG_VXFS_FS is not set > +# CONFIG_MINIX_FS is not set > +# CONFIG_HPFS_FS is not set > +# CONFIG_QNX4FS_FS is not set > +# CONFIG_ROMFS_FS is not set > +# CONFIG_SYSV_FS is not set > +# CONFIG_UFS_FS is not set > + > +# > +# Partition Types > +# > +CONFIG_PARTITION_ADVANCED=y > +# CONFIG_ACORN_PARTITION is not set > +# CONFIG_OSF_PARTITION is not set > +# CONFIG_AMIGA_PARTITION is not set > +# CONFIG_ATARI_PARTITION is not set > +# CONFIG_MAC_PARTITION is not set > +CONFIG_MSDOS_PARTITION=y > +# CONFIG_BSD_DISKLABEL is not set > +# CONFIG_MINIX_SUBPARTITION is not set > +# CONFIG_SOLARIS_X86_PARTITION is not set > +# CONFIG_UNIXWARE_DISKLABEL is not set > +# CONFIG_LDM_PARTITION is not set > +# CONFIG_SGI_PARTITION is not set > +# CONFIG_ULTRIX_PARTITION is not set > +# CONFIG_SUN_PARTITION is not set > +# CONFIG_KARMA_PARTITION is not set > +# CONFIG_EFI_PARTITION is not set > +# CONFIG_SYSV68_PARTITION is not set > +CONFIG_NLS=y > +CONFIG_NLS_DEFAULT="iso8859-1" > +CONFIG_NLS_CODEPAGE_437=y > +# CONFIG_NLS_CODEPAGE_737 is not set > +# CONFIG_NLS_CODEPAGE_775 is not set > +# CONFIG_NLS_CODEPAGE_850 is not set > +# CONFIG_NLS_CODEPAGE_852 is not set > +# CONFIG_NLS_CODEPAGE_855 is not set > +# CONFIG_NLS_CODEPAGE_857 is not set > +# CONFIG_NLS_CODEPAGE_860 is not set > +# CONFIG_NLS_CODEPAGE_861 is not set > +# CONFIG_NLS_CODEPAGE_862 is not set > +# CONFIG_NLS_CODEPAGE_863 is not set > +# CONFIG_NLS_CODEPAGE_864 is not set > +# CONFIG_NLS_CODEPAGE_865 is not set > +# CONFIG_NLS_CODEPAGE_866 is not set > +# CONFIG_NLS_CODEPAGE_869 is not set > +# CONFIG_NLS_CODEPAGE_936 is not set > +# CONFIG_NLS_CODEPAGE_950 is not set > +# CONFIG_NLS_CODEPAGE_932 is not set > +# CONFIG_NLS_CODEPAGE_949 is not set > +# CONFIG_NLS_CODEPAGE_874 is not set > +# CONFIG_NLS_ISO8859_8 is not set > +# CONFIG_NLS_CODEPAGE_1250 is not set > +# CONFIG_NLS_CODEPAGE_1251 is not set > +# CONFIG_NLS_ASCII is not set > +CONFIG_NLS_ISO8859_1=y > +# CONFIG_NLS_ISO8859_2 is not set > +# CONFIG_NLS_ISO8859_3 is not set > +# CONFIG_NLS_ISO8859_4 is not set > +# CONFIG_NLS_ISO8859_5 is not set > +# CONFIG_NLS_ISO8859_6 is not set > +# CONFIG_NLS_ISO8859_7 is not set > +# CONFIG_NLS_ISO8859_9 is not set > +# CONFIG_NLS_ISO8859_13 is not set > +# CONFIG_NLS_ISO8859_14 is not set > +# CONFIG_NLS_ISO8859_15 is not set > +# CONFIG_NLS_KOI8_R is not set > +# CONFIG_NLS_KOI8_U is not set > +# CONFIG_NLS_UTF8 is not set > + > +# > +# Kernel hacking > +# > +# CONFIG_PRINTK_TIME is not set > +CONFIG_ENABLE_WARN_DEPRECATED=y > +CONFIG_ENABLE_MUST_CHECK=y > +CONFIG_FRAME_WARN=1024 > +CONFIG_MAGIC_SYSRQ=y > +# CONFIG_UNUSED_SYMBOLS is not set > +# CONFIG_DEBUG_FS is not set > +# CONFIG_HEADERS_CHECK is not set > +CONFIG_DEBUG_KERNEL=y > +# CONFIG_DEBUG_SHIRQ is not set > +CONFIG_DETECT_SOFTLOCKUP=y > +CONFIG_SCHED_DEBUG=y > +# CONFIG_SCHEDSTATS is not set > +# CONFIG_TIMER_STATS is not set > +# CONFIG_DEBUG_OBJECTS is not set > +# CONFIG_DEBUG_SLAB is not set > +# CONFIG_DEBUG_RT_MUTEXES is not set > +# CONFIG_RT_MUTEX_TESTER is not set > +# CONFIG_DEBUG_SPINLOCK is not set > +CONFIG_DEBUG_MUTEXES=y > +# CONFIG_DEBUG_LOCK_ALLOC is not set > +# CONFIG_PROVE_LOCKING is not set > +# CONFIG_LOCK_STAT is not set > +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set > +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set > +# CONFIG_DEBUG_KOBJECT is not set > +# CONFIG_DEBUG_BUGVERBOSE is not set > +CONFIG_DEBUG_INFO=y > +# CONFIG_DEBUG_VM is not set > +# CONFIG_DEBUG_WRITECOUNT is not set > +# CONFIG_DEBUG_LIST is not set > +# CONFIG_DEBUG_SG is not set > +CONFIG_FRAME_POINTER=y > +# CONFIG_BOOT_PRINTK_DELAY is not set > +# CONFIG_RCU_TORTURE_TEST is not set > +# CONFIG_BACKTRACE_SELF_TEST is not set > +# CONFIG_FAULT_INJECTION is not set > +# CONFIG_SAMPLES is not set > +# CONFIG_DEBUG_USER is not set > +# CONFIG_DEBUG_ERRORS is not set > +# CONFIG_DEBUG_STACK_USAGE is not set > +CONFIG_DEBUG_LL=y > +# CONFIG_DEBUG_ICEDCC is not set > + > +# > +# Security options > +# > +# CONFIG_KEYS is not set > +# CONFIG_SECURITY is not set > +# CONFIG_SECURITY_FILE_CAPABILITIES is not set > +CONFIG_CRYPTO=y > + > +# > +# Crypto core or helper > +# > +CONFIG_CRYPTO_ALGAPI=y > +CONFIG_CRYPTO_BLKCIPHER=y > +CONFIG_CRYPTO_MANAGER=y > +# CONFIG_CRYPTO_GF128MUL is not set > +# CONFIG_CRYPTO_NULL is not set > +# CONFIG_CRYPTO_CRYPTD is not set > +# CONFIG_CRYPTO_AUTHENC is not set > +# CONFIG_CRYPTO_TEST is not set > + > +# > +# Authenticated Encryption with Associated Data > +# > +# CONFIG_CRYPTO_CCM is not set > +# CONFIG_CRYPTO_GCM is not set > +# CONFIG_CRYPTO_SEQIV is not set > + > +# > +# Block modes > +# > +CONFIG_CRYPTO_CBC=y > +# CONFIG_CRYPTO_CTR is not set > +# CONFIG_CRYPTO_CTS is not set > +CONFIG_CRYPTO_ECB=m > +# CONFIG_CRYPTO_LRW is not set > +CONFIG_CRYPTO_PCBC=m > +# CONFIG_CRYPTO_XTS is not set > + > +# > +# Hash modes > +# > +# CONFIG_CRYPTO_HMAC is not set > +# CONFIG_CRYPTO_XCBC is not set > + > +# > +# Digest > +# > +# CONFIG_CRYPTO_CRC32C is not set > +# CONFIG_CRYPTO_MD4 is not set > +CONFIG_CRYPTO_MD5=y > +# CONFIG_CRYPTO_MICHAEL_MIC is not set > +# CONFIG_CRYPTO_SHA1 is not set > +# CONFIG_CRYPTO_SHA256 is not set > +# CONFIG_CRYPTO_SHA512 is not set > +# CONFIG_CRYPTO_TGR192 is not set > +# CONFIG_CRYPTO_WP512 is not set > + > +# > +# Ciphers > +# > +# CONFIG_CRYPTO_AES is not set > +# CONFIG_CRYPTO_ANUBIS is not set > +# CONFIG_CRYPTO_ARC4 is not set > +# CONFIG_CRYPTO_BLOWFISH is not set > +# CONFIG_CRYPTO_CAMELLIA is not set > +# CONFIG_CRYPTO_CAST5 is not set > +# CONFIG_CRYPTO_CAST6 is not set > +CONFIG_CRYPTO_DES=y > +# CONFIG_CRYPTO_FCRYPT is not set > +# CONFIG_CRYPTO_KHAZAD is not set > +# CONFIG_CRYPTO_SALSA20 is not set > +# CONFIG_CRYPTO_SEED is not set > +# CONFIG_CRYPTO_SERPENT is not set > +# CONFIG_CRYPTO_TEA is not set > +# CONFIG_CRYPTO_TWOFISH is not set > + > +# > +# Compression > +# > +# CONFIG_CRYPTO_DEFLATE is not set > +# CONFIG_CRYPTO_LZO is not set > +CONFIG_CRYPTO_HW=y > + > +# > +# Library routines > +# > +CONFIG_BITREVERSE=y > +# CONFIG_GENERIC_FIND_FIRST_BIT is not set > +# CONFIG_GENERIC_FIND_NEXT_BIT is not set > +CONFIG_CRC_CCITT=y > +# CONFIG_CRC16 is not set > +# CONFIG_CRC_ITU_T is not set > +CONFIG_CRC32=y > +# CONFIG_CRC7 is not set > +CONFIG_LIBCRC32C=y > +CONFIG_PLIST=y > +CONFIG_HAS_IOMEM=y > +CONFIG_HAS_IOPORT=y > +CONFIG_HAS_DMA=y > -- > 1.5.3.2 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [RESENDING PATCH 2/4] ARM: OMAP: Add basic board support for OMAP LDP. 2008-05-15 14:42 ` [RESENDING PATCH 2/4] ARM: OMAP: Add basic board support for OMAP LDP Nishant Kamat 2008-05-15 14:42 ` [RESENDING PATCH 3/4] ARM: OMAP: Add default kernel config " Nishant Kamat @ 2008-05-16 17:53 ` Tony Lindgren 1 sibling, 0 replies; 10+ messages in thread From: Tony Lindgren @ 2008-05-16 17:53 UTC (permalink / raw) To: Nishant Kamat; +Cc: linux-omap * Nishant Kamat <nskamat@ti.com> [080515 07:45]: > This adds basic board support for the OMAP3430 LDP development platform. > It adds support for the touchscreen, RTC, UART, USB and MMC - all of which > work with little or no changes w.r.t. the OMAP3430 SDP. Pushing. Tony > Signed-off-by: Nishant Kamat <nskamat@ti.com> > --- > arch/arm/mach-omap2/Kconfig | 4 + > arch/arm/mach-omap2/Makefile | 3 + > arch/arm/mach-omap2/board-ldp.c | 253 +++++++++++++++++++++++++++++++++ > include/asm-arm/arch-omap/board-ldp.h | 34 +++++ > include/asm-arm/arch-omap/hardware.h | 4 + > 5 files changed, 298 insertions(+), 0 deletions(-) > create mode 100644 arch/arm/mach-omap2/board-ldp.c > create mode 100644 include/asm-arm/arch-omap/board-ldp.h > > diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig > index 5c229cc..d38f8ca 100644 > --- a/arch/arm/mach-omap2/Kconfig > +++ b/arch/arm/mach-omap2/Kconfig > @@ -98,6 +98,10 @@ config MACH_OMAP_2430SDP > bool "OMAP 2430 SDP board" > depends on ARCH_OMAP2 && ARCH_OMAP2430 > > +config MACH_OMAP_LDP > + bool "OMAP 3 LDP board" > + depends on ARCH_OMAP3 && ARCH_OMAP34XX > + > config MACH_OMAP_2430OSK > bool "OMAP 2430 OSK board" > depends on ARCH_OMAP2 && ARCH_OMAP24XX > diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile > index 552664c..b6eea89 100644 > --- a/arch/arm/mach-omap2/Makefile > +++ b/arch/arm/mach-omap2/Makefile > @@ -44,6 +44,9 @@ obj-$(CONFIG_MACH_OMAP3EVM) += board-omap3evm.o \ > obj-$(CONFIG_MACH_OMAP3_BEAGLE) += board-omap3beagle.o \ > usb-musb.o usb-ehci.o \ > hsmmc.o > +obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o \ > + hsmmc.o \ > + usb-musb.o > obj-$(CONFIG_MACH_OMAP_APOLLON) += board-apollon.o \ > board-apollon-mmc.o \ > board-apollon-keys.o > diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c > new file mode 100644 > index 0000000..2ac4c9b > --- /dev/null > +++ b/arch/arm/mach-omap2/board-ldp.c > @@ -0,0 +1,253 @@ > +/* > + * linux/arch/arm/mach-omap2/board-ldp.c > + * > + * Copyright (C) 2008 Texas Instruments Inc. > + * Nishant Kamat <nskamat@ti.com> > + * > + * Modified from mach-omap2/board-3430sdp.c > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + */ > + > +#include <linux/kernel.h> > +#include <linux/init.h> > +#include <linux/platform_device.h> > +#include <linux/delay.h> > +#include <linux/input.h> > +#include <linux/workqueue.h> > +#include <linux/err.h> > +#include <linux/clk.h> > +#include <linux/spi/spi.h> > +#include <linux/spi/ads7846.h> > +#include <linux/i2c/twl4030.h> > +#include <linux/i2c/twl4030-rtc.h> > + > +#include <asm/hardware.h> > +#include <asm/mach-types.h> > +#include <asm/mach/arch.h> > +#include <asm/mach/map.h> > + > +#include <asm/arch/mcspi.h> > +#include <asm/arch/gpio.h> > +#include <asm/arch/board.h> > +#include <asm/arch/common.h> > +#include <asm/arch/gpmc.h> > +#include <asm/arch/hsmmc.h> > +#include <asm/arch/usb-musb.h> > + > +#include <asm/io.h> > +#include <asm/delay.h> > +#include <asm/arch/control.h> > + > +#define ENABLE_VAUX1_DEDICATED 0x03 > +#define ENABLE_VAUX1_DEV_GRP 0x20 > + > +#define TWL4030_MSECURE_GPIO 22 > + > +static int ts_gpio; > + > +#ifdef CONFIG_RTC_DRV_TWL4030 > +static int twl4030_rtc_init(void) > +{ > + int ret = 0; > + > + /* 3430ES2.0 doesn't have msecure/gpio-22 line connected to T2 */ > + if (is_device_type_gp() && is_sil_rev_less_than(OMAP3430_REV_ES2_0)) { > + u32 msecure_pad_config_reg = omap_ctrl_base_get() + 0xA3C; > + int mux_mask = 0x04; > + u16 tmp; > + > + ret = omap_request_gpio(TWL4030_MSECURE_GPIO); > + if (ret < 0) { > + printk(KERN_ERR "twl4030_rtc_init: can't" > + "reserve GPIO:%d !\n", TWL4030_MSECURE_GPIO); > + goto out; > + } > + /* > + * TWL4030 will be in secure mode if msecure line from OMAP > + * is low. Make msecure line high in order to change the > + * TWL4030 RTC time and calender registers. > + */ > + omap_set_gpio_direction(TWL4030_MSECURE_GPIO, 0); > + > + tmp = omap_readw(msecure_pad_config_reg); > + tmp &= 0xF8; /* To enable mux mode 03/04 = GPIO_RTC */ > + tmp |= mux_mask;/* To enable mux mode 03/04 = GPIO_RTC */ > + omap_writew(tmp, msecure_pad_config_reg); > + > + omap_set_gpio_dataout(TWL4030_MSECURE_GPIO, 1); > + } > +out: > + return ret; > +} > + > +static void twl4030_rtc_exit(void) > +{ > + omap_free_gpio(TWL4030_MSECURE_GPIO); > +} > + > +static struct twl4030rtc_platform_data ldp_twl4030rtc_data = { > + .init = &twl4030_rtc_init, > + .exit = &twl4030_rtc_exit, > +}; > + > +static struct platform_device ldp_twl4030rtc_device = { > + .name = "twl4030_rtc", > + .id = -1, > + .dev = { > + .platform_data = &ldp_twl4030rtc_data, > + }, > +}; > +#endif > + > +/** > + * @brief ads7846_dev_init : Requests & sets GPIO line for pen-irq > + * > + * @return - void. If request gpio fails then Flag KERN_ERR. > + */ > +static void ads7846_dev_init(void) > +{ > + if (omap_request_gpio(ts_gpio) < 0) { > + printk(KERN_ERR "can't get ads746 pen down GPIO\n"); > + return; > + } > + > + omap_set_gpio_direction(ts_gpio, 1); > + > + omap_set_gpio_debounce(ts_gpio, 1); > + omap_set_gpio_debounce_time(ts_gpio, 0xa); > +} > + > +static int ads7846_get_pendown_state(void) > +{ > + return !omap_get_gpio_datain(ts_gpio); > +} > + > +/* > + * This enable(1)/disable(0) the voltage for TS: uses twl4030 calls > + */ > +static int ads7846_vaux_control(int vaux_cntrl) > +{ > + int ret = 0; > + > +#ifdef CONFIG_TWL4030_CORE > + /* check for return value of ldo_use: if success it returns 0 */ > + if (vaux_cntrl == VAUX_ENABLE) { > + if (ret != twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, > + ENABLE_VAUX1_DEDICATED, TWL4030_VAUX1_DEDICATED)) > + return -EIO; > + if (ret != twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, > + ENABLE_VAUX1_DEV_GRP, TWL4030_VAUX1_DEV_GRP)) > + return -EIO; > + } else if (vaux_cntrl == VAUX_DISABLE) { > + if (ret != twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, > + 0x00, TWL4030_VAUX1_DEDICATED)) > + return -EIO; > + if (ret != twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, > + 0x00, TWL4030_VAUX1_DEV_GRP)) > + return -EIO; > + } > +#else > + ret = -EIO; > +#endif > + return ret; > +} > + > +static struct ads7846_platform_data tsc2046_config __initdata = { > + .get_pendown_state = ads7846_get_pendown_state, > + .keep_vref_on = 1, > + .vaux_control = ads7846_vaux_control, > +}; > + > + > +static struct omap2_mcspi_device_config tsc2046_mcspi_config = { > + .turbo_mode = 0, > + .single_channel = 1, /* 0: slave, 1: master */ > +}; > + > +static struct spi_board_info ldp_spi_board_info[] __initdata = { > + [0] = { > + /* > + * TSC2046 operates at a max freqency of 2MHz, so > + * operate slightly below at 1.5MHz > + */ > + .modalias = "ads7846", > + .bus_num = 1, > + .chip_select = 0, > + .max_speed_hz = 1500000, > + .controller_data = &tsc2046_mcspi_config, > + .irq = 0, > + .platform_data = &tsc2046_config, > + }, > +}; > + > +static struct platform_device *ldp_devices[] __initdata = { > +#ifdef CONFIG_RTC_DRV_TWL4030 > + &ldp_twl4030rtc_device, > +#endif > +}; > + > +static void __init omap_ldp_init_irq(void) > +{ > + omap2_init_common_hw(); > + omap_init_irq(); > + omap_gpio_init(); > +} > + > +static struct omap_uart_config ldp_uart_config __initdata = { > + .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), > +}; > + > +static struct omap_mmc_config ldp_mmc_config __initdata = { > + .mmc [0] = { > + .enabled = 1, > + .wire4 = 1, > + }, > +}; > + > +static struct omap_board_config_kernel ldp_config[] __initdata = { > + { OMAP_TAG_UART, &ldp_uart_config }, > + { OMAP_TAG_MMC, &ldp_mmc_config }, > +}; > + > +static int __init omap_i2c_init(void) > +{ > + omap_register_i2c_bus(1, 2600, NULL, 0); > + omap_register_i2c_bus(2, 400, NULL, 0); > + omap_register_i2c_bus(3, 400, NULL, 0); > + return 0; > +} > + > +static void __init omap_ldp_init(void) > +{ > + platform_add_devices(ldp_devices, ARRAY_SIZE(ldp_devices)); > + omap_board_config = ldp_config; > + omap_board_config_size = ARRAY_SIZE(ldp_config); > + ts_gpio = 54; > + ldp_spi_board_info[0].irq = OMAP_GPIO_IRQ(ts_gpio); > + spi_register_board_info(ldp_spi_board_info, > + ARRAY_SIZE(ldp_spi_board_info)); > + ads7846_dev_init(); > + omap_serial_init(); > + usb_musb_init(); > + hsmmc_init(); > +} > + > +static void __init omap_ldp_map_io(void) > +{ > + omap2_set_globals_343x(); > + omap2_map_common_io(); > +} > +arch_initcall(omap_i2c_init); > + > +MACHINE_START(OMAP_LDP, "OMAP LDP board") > + .phys_io = 0x48000000, > + .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, > + .boot_params = 0x80000100, > + .map_io = omap_ldp_map_io, > + .init_irq = omap_ldp_init_irq, > + .init_machine = omap_ldp_init, > + .timer = &omap_timer, > +MACHINE_END > diff --git a/include/asm-arm/arch-omap/board-ldp.h b/include/asm-arm/arch-omap/board-ldp.h > new file mode 100644 > index 0000000..b227561 > --- /dev/null > +++ b/include/asm-arm/arch-omap/board-ldp.h > @@ -0,0 +1,34 @@ > +/* > + * linux/include/asm-arm/arch-omap/board-ldp.h > + * > + * Hardware definitions for TI OMAP3 LDP. > + * > + * Copyright (C) 2008 Texas Instruments Inc. > + * > + * This program is free software; you can redistribute it and/or modify it > + * under the terms of the GNU General Public License as published by the > + * Free Software Foundation; either version 2 of the License, or (at your > + * option) any later version. > + * > + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED > + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF > + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN > + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, > + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT > + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF > + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON > + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT > + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF > + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. > + * > + * You should have received a copy of the GNU General Public License along > + * with this program; if not, write to the Free Software Foundation, Inc., > + * 675 Mass Ave, Cambridge, MA 02139, USA. > + */ > + > +#ifndef __ASM_ARCH_OMAP_LDP_H > +#define __ASM_ARCH_OMAP_LDP_H > + > +#define TWL4030_IRQNUM INT_34XX_SYS_NIRQ > + > +#endif /* __ASM_ARCH_OMAP_LDP_H */ > diff --git a/include/asm-arm/arch-omap/hardware.h b/include/asm-arm/arch-omap/hardware.h > index 09f8ef8..fed9a76 100644 > --- a/include/asm-arm/arch-omap/hardware.h > +++ b/include/asm-arm/arch-omap/hardware.h > @@ -343,6 +343,10 @@ > #include "board-omap3beagle.h" > #endif > > +#ifdef CONFIG_MACH_OMAP_LDP > +#include "board-ldp.h" > +#endif > + > #ifdef CONFIG_MACH_OMAP_APOLLON > #include "board-apollon.h" > #endif > -- > 1.5.3.2 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [RESENDING PATCH 1/4] ARM: OMAP: Add register defines for TWL4030 vaux1 2008-05-15 14:42 [RESENDING PATCH 1/4] ARM: OMAP: Add register defines for TWL4030 vaux1 Nishant Kamat 2008-05-15 14:42 ` [RESENDING PATCH 2/4] ARM: OMAP: Add basic board support for OMAP LDP Nishant Kamat @ 2008-05-16 17:52 ` Tony Lindgren 1 sibling, 0 replies; 10+ messages in thread From: Tony Lindgren @ 2008-05-16 17:52 UTC (permalink / raw) To: Nishant Kamat; +Cc: linux-omap * Nishant Kamat <nskamat@ti.com> [080515 07:45]: > This patch adds the register defines for TWL4030 VAUX1. Pushing. Tony > Signed-off-by: Nishant Kamat <nskamat@ti.com> > --- > include/linux/i2c/twl4030.h | 2 ++ > 1 files changed, 2 insertions(+), 0 deletions(-) > > diff --git a/include/linux/i2c/twl4030.h b/include/linux/i2c/twl4030.h > index 05d07f9..40af46e 100644 > --- a/include/linux/i2c/twl4030.h > +++ b/include/linux/i2c/twl4030.h > @@ -77,6 +77,8 @@ > /* Offsets to Power Registers */ > #define TWL4030_VDAC_DEV_GRP 0x3B > #define TWL4030_VDAC_DEDICATED 0x3E > +#define TWL4030_VAUX1_DEV_GRP 0x17 > +#define TWL4030_VAUX1_DEDICATED 0x1A > #define TWL4030_VAUX2_DEV_GRP 0x1B > #define TWL4030_VAUX2_DEDICATED 0x1E > #define TWL4030_VAUX3_DEV_GRP 0x1F > -- > 1.5.3.2 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2008-05-21 15:51 UTC | newest] Thread overview: 10+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2008-05-15 14:42 [RESENDING PATCH 1/4] ARM: OMAP: Add register defines for TWL4030 vaux1 Nishant Kamat 2008-05-15 14:42 ` [RESENDING PATCH 2/4] ARM: OMAP: Add basic board support for OMAP LDP Nishant Kamat 2008-05-15 14:42 ` [RESENDING PATCH 3/4] ARM: OMAP: Add default kernel config " Nishant Kamat 2008-05-15 14:42 ` [RESENDING PATCH 4/4] ARM: OMAP: Add ethernet support " Nishant Kamat 2008-05-16 17:55 ` Tony Lindgren 2008-05-19 9:50 ` [RESENDING PATCH 4/4] ARM: OMAP: Add ethernet support for OMAPLDP Kamat, Nishant 2008-05-21 15:51 ` Tony Lindgren 2008-05-16 17:54 ` [RESENDING PATCH 3/4] ARM: OMAP: Add default kernel config for OMAP LDP Tony Lindgren 2008-05-16 17:53 ` [RESENDING PATCH 2/4] ARM: OMAP: Add basic board support " Tony Lindgren 2008-05-16 17:52 ` [RESENDING PATCH 1/4] ARM: OMAP: Add register defines for TWL4030 vaux1 Tony Lindgren
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.