From: "John W. Linville" <linville@tuxdriver.com>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org, linux-wireless@vger.kernel.org
Subject: pull request: wireless-next-2.6 2008-05-22
Date: Thu, 22 May 2008 08:40:17 -0400 [thread overview]
Message-ID: <20080522124017.GA3996@tuxdriver.com> (raw)
Dave,
Another week, another 70+ patches -- actually this pace feels a
bit slow! This batch includes updates to rt2x00, libertas, iwlwifi,
mac80211, and a smattering of other drivers.
Let me know if there are problems!
John
---
Individual patches are available here:
http://www.kernel.org/pub/linux/kernel/people/linville/wireless-next-2.6/
---
The following changes since commit 5b06c85c3b96fa8db632f1ee94f99a2bd0215f3a:
Allan Stephens (1):
tipc: Cosmetic cleanup of topology service code
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6.git master
Atsushi Nemoto (1):
zd1211rw: Use DMA-aware buffer for usb transfer
David Woodhouse (3):
libertas: Increase priority of 'unknown command' warnings
libertas: fix multicast filtering on eth and msh interfaces
libertas: Add reset_card() callback to hardware driver
Emmanuel Grumbach (2):
iwlwifi: don't switch to SGI if not supported by AP
iwlwifi: clean up and bug fix for security
Ester Kummer (1):
iwlwifi: trigger event log from debugfs
Gertjan van Wingerde (2):
rt2x00: Fix queue related oops in case of deselected mac80211 multi-queue feature.
rt2x00: Only initialize the minimum needed fields of PCI TX descriptors.
Gregory Greenman (1):
iwlwifi: get_hw_cmd_size
Harvey Harrison (6):
mac80211: michael.c use kernel-provided infrastructure
mac80211: introduce struct michael_mic_ctx and static helpers
mac80211: add const, remove unused function, make one function static
mac80211: add a struct to hold tkip context
mac80211: tkip.c use struct tkip_ctx in phase 1 key mixing
mac80211: tkip.c use struct tkip_ctx in phase 2 key mixing
Holger Schurig (1):
libertas: reduce command retry time
Ivo van Doorn (9):
rt2x00: trim skb_frame_desc to 32 bytes
rt2x00: Fix TX status reporting
rt2x00: Remove ieee80211_tx_control argument from write_tx_desc()
rt2x00: Preserve descriptor information after memmove()
rt2x00: Split rt2x00lib_write_tx_desc()
rt2x00: Remove redundant flags/dev_flags initializations
rt2x00: Merge RX and TX entry private data
rt2x00: Remove extra +
rt2x00: Release rt2x00 2.1.6
Javier Cardona (3):
libertas: Extend MESH_CONFIG command to access non-volatile configuration
libertas: sysfs interface for accessing non-volatile configuration
libertas: sysfs interface for accessing default mesh channel
Johannes Berg (8):
mac80211: fix bugs in queue handling functions
mac80211: let drivers wake but not start queues
mac80211: use rate index in TX control
mac80211: reorder some transmit handlers
mac80211: move TX info into skb->cb
mac80211: dont allow fragmentation and requeuing on A-MPDU queues
mac80211: use multi-queue master netdevice
mac80211: remove channel use statistics
Larry.Finger@lwfinger.net (1):
b43: Fix typo in firmware file name for 802.11 cores with rev 13
Michael Buesch (4):
b43: Add hooks for firmware debugging
b43: Allow running without PCM firmware
b43: Add panic reason code that doesn't trigger restart
b43: Add firmware markers support
Pavel Emelyanov (8):
mac80211: Brush up error paths in mesh_path_add.
mac80211: Fix one more call to synchronize_rcu in atomic context.
mac80211: Prepare mesh_table_grow to failing copy_node callback.
mac80211: Report allocation failure from mesh_path_node_copy.
mac80211: Fix sleeping allocation under lock in mesh_path_node_copy.
mac80211: Do not report false error from mesh_path_add.
mac80211: Merge error paths in mesh_table_grow().
mac80211: Consolidate hash kfree-ing in mesh.c.
Ron Rindjunsky (9):
iwlwifi: changing irrelevant comment
iwlwifi: remove iwl4965_nic_start function
mac80211: separate Tx and Rx MCS when configuring HT
iwlwifi: filling Tx MCS set
iwlwifi: rename and move Tx queue activation/deactivation
iwlwifi: add rx_handlers stub for iwl5000
iwlwifi: add ucode loaders for iwl5000
iwlwifi: add ucode init flow handling for iwl5000
iwlwifi: iwl5000 WiFi/WiMax coexistence
Tomas Winkler (13):
iwlwifi: rename iwl4965_queue to iwl_queue
iwlwifi: rename iwl4965_tx_info to iwl_tx_info
iwlwifi: remove 4965 from iwl4965_tx_queue_update_write_ptr
iwlwifi: remove 4965 prefix from iwl4965_frame
iwlwifi: remove 4965 from iwl4965_rate_info
iwlwifi: move iwl_bcast_addr to iwlcore
iwlwifi: move more station managment into iwl-sta.c
iwlwifi: remove 4956 form iwl4965_tx_cmd
iwlwifi: refactor ieee80211_get_qos_ctrl
iwlwifi: move TX code into iwl-tx.c
iwlwifi: remove 4965 remainings in iwl-eeprom.c file
iwlwifi: add debugfs to disable/enable run time calibration
iwlwifi: refactor pci prob flow
drivers/net/wireless/adm8211.c | 35 +-
drivers/net/wireless/adm8211.h | 1 -
drivers/net/wireless/ath5k/base.c | 74 +-
drivers/net/wireless/ath5k/base.h | 1 -
drivers/net/wireless/b43/b43.h | 28 +-
drivers/net/wireless/b43/dma.c | 46 +-
drivers/net/wireless/b43/dma.h | 3 +-
drivers/net/wireless/b43/main.c | 192 ++++-
drivers/net/wireless/b43/pio.c | 36 +-
drivers/net/wireless/b43/pio.h | 8 +-
drivers/net/wireless/b43/xmit.c | 65 +-
drivers/net/wireless/b43/xmit.h | 4 +-
drivers/net/wireless/b43legacy/dma.c | 35 +-
drivers/net/wireless/b43legacy/dma.h | 4 +-
drivers/net/wireless/b43legacy/main.c | 13 +-
drivers/net/wireless/b43legacy/pio.c | 19 +-
drivers/net/wireless/b43legacy/pio.h | 4 +-
drivers/net/wireless/b43legacy/xmit.c | 47 +-
drivers/net/wireless/b43legacy/xmit.h | 2 +-
drivers/net/wireless/iwlwifi/iwl-3945-rs.c | 16 +-
drivers/net/wireless/iwlwifi/iwl-3945.c | 25 +-
drivers/net/wireless/iwlwifi/iwl-3945.h | 3 +-
drivers/net/wireless/iwlwifi/iwl-4965-rs.c | 123 ++--
drivers/net/wireless/iwlwifi/iwl-4965-rs.h | 8 +-
drivers/net/wireless/iwlwifi/iwl-4965.c | 304 ++-------
drivers/net/wireless/iwlwifi/iwl-5000.c | 316 ++++++++-
drivers/net/wireless/iwlwifi/iwl-calib.c | 9 +
drivers/net/wireless/iwlwifi/iwl-calib.h | 4 +-
drivers/net/wireless/iwlwifi/iwl-commands.h | 86 +++-
drivers/net/wireless/iwlwifi/iwl-core.c | 210 +++++-
drivers/net/wireless/iwlwifi/iwl-core.h | 24 +-
drivers/net/wireless/iwlwifi/iwl-debug.h | 10 +-
drivers/net/wireless/iwlwifi/iwl-debugfs.c | 52 ++-
drivers/net/wireless/iwlwifi/iwl-dev.h | 90 ++-
drivers/net/wireless/iwlwifi/iwl-eeprom.c | 23 +-
drivers/net/wireless/iwlwifi/iwl-hcmd.c | 4 +-
drivers/net/wireless/iwlwifi/iwl-helpers.h | 19 +
drivers/net/wireless/iwlwifi/iwl-prph.h | 28 +
drivers/net/wireless/iwlwifi/iwl-sta.c | 294 +++++++-
drivers/net/wireless/iwlwifi/iwl-sta.h | 5 +
drivers/net/wireless/iwlwifi/iwl-tx.c | 651 ++++++++++++++++-
drivers/net/wireless/iwlwifi/iwl3945-base.c | 85 +--
drivers/net/wireless/iwlwifi/iwl4965-base.c | 1067 +++------------------------
drivers/net/wireless/libertas/Makefile | 8 +-
drivers/net/wireless/libertas/assoc.c | 6 +-
drivers/net/wireless/libertas/cmd.c | 105 ++--
drivers/net/wireless/libertas/cmd.h | 3 +
drivers/net/wireless/libertas/cmdresp.c | 5 +-
drivers/net/wireless/libertas/decl.h | 4 +
drivers/net/wireless/libertas/defs.h | 14 +-
drivers/net/wireless/libertas/dev.h | 3 +
drivers/net/wireless/libertas/host.h | 17 +
drivers/net/wireless/libertas/hostcmd.h | 2 +-
drivers/net/wireless/libertas/main.c | 205 ++++--
drivers/net/wireless/libertas/persistcfg.c | 453 ++++++++++++
drivers/net/wireless/libertas/types.h | 30 +
drivers/net/wireless/libertas/wext.c | 5 +-
drivers/net/wireless/p54/p54common.c | 93 +--
drivers/net/wireless/p54/p54common.h | 1 -
drivers/net/wireless/p54/p54pci.c | 2 +-
drivers/net/wireless/rt2x00/rt2400pci.c | 132 ++--
drivers/net/wireless/rt2x00/rt2400pci.h | 5 +
drivers/net/wireless/rt2x00/rt2500pci.c | 120 ++--
drivers/net/wireless/rt2x00/rt2500pci.h | 5 +
drivers/net/wireless/rt2x00/rt2500usb.c | 85 ++--
drivers/net/wireless/rt2x00/rt2500usb.h | 5 +
drivers/net/wireless/rt2x00/rt2x00.h | 52 +-
drivers/net/wireless/rt2x00/rt2x00debug.c | 4 +-
drivers/net/wireless/rt2x00/rt2x00dev.c | 226 +-----
drivers/net/wireless/rt2x00/rt2x00lib.h | 6 +-
drivers/net/wireless/rt2x00/rt2x00mac.c | 76 ++-
drivers/net/wireless/rt2x00/rt2x00pci.c | 103 +--
drivers/net/wireless/rt2x00/rt2x00pci.h | 28 +-
drivers/net/wireless/rt2x00/rt2x00queue.c | 167 ++++-
drivers/net/wireless/rt2x00/rt2x00queue.h | 73 ++-
drivers/net/wireless/rt2x00/rt2x00reg.h | 11 -
drivers/net/wireless/rt2x00/rt2x00usb.c | 228 +++---
drivers/net/wireless/rt2x00/rt2x00usb.h | 26 +-
drivers/net/wireless/rt2x00/rt61pci.c | 133 ++--
drivers/net/wireless/rt2x00/rt61pci.h | 5 +
drivers/net/wireless/rt2x00/rt73usb.c | 59 +-
drivers/net/wireless/rt2x00/rt73usb.h | 5 +
drivers/net/wireless/rtl8180_dev.c | 62 +-
drivers/net/wireless/rtl8187.h | 6 -
drivers/net/wireless/rtl8187_dev.c | 45 +-
drivers/net/wireless/zd1211rw/zd_mac.c | 161 ++---
drivers/net/wireless/zd1211rw/zd_mac.h | 16 -
drivers/net/wireless/zd1211rw/zd_usb.c | 29 +-
include/linux/ieee80211.h | 18 +-
include/net/mac80211.h | 348 +++++-----
net/mac80211/Kconfig | 14 +-
net/mac80211/Makefile | 2 +-
net/mac80211/cfg.c | 4 +-
net/mac80211/debugfs_key.c | 8 +-
net/mac80211/debugfs_netdev.c | 9 -
net/mac80211/debugfs_sta.c | 1 -
net/mac80211/ieee80211_i.h | 76 +--
net/mac80211/iface.c | 2 +-
net/mac80211/key.h | 17 +-
net/mac80211/main.c | 261 ++++----
net/mac80211/mesh.c | 38 +-
net/mac80211/mesh.h | 2 +-
net/mac80211/mesh_pathtbl.c | 53 +-
net/mac80211/michael.c | 106 +--
net/mac80211/michael.h | 8 +-
net/mac80211/mlme.c | 34 +-
net/mac80211/rate.c | 12 +-
net/mac80211/rate.h | 33 +-
net/mac80211/rc80211_pid.h | 4 +-
net/mac80211/rc80211_pid_algo.c | 22 +-
net/mac80211/rc80211_pid_debugfs.c | 8 +-
net/mac80211/rx.c | 72 +--
net/mac80211/sta_info.c | 8 +-
net/mac80211/sta_info.h | 6 +-
net/mac80211/tkip.c | 86 +--
net/mac80211/tkip.h | 4 -
net/mac80211/tx.c | 729 +++++++++----------
net/mac80211/util.c | 59 +-
net/mac80211/wep.c | 9 +-
net/mac80211/wme.c | 28 +-
net/mac80211/wme.h | 2 +-
net/mac80211/wpa.c | 81 +--
122 files changed, 5042 insertions(+), 4024 deletions(-)
create mode 100644 drivers/net/wireless/libertas/persistcfg.c
Omnibus patch available here:
http://www.kernel.org/pub/linux/kernel/people/linville/wireless-next-2.6-2008-05-22.patch.bz2
--
John W. Linville
linville@tuxdriver.com
WARNING: multiple messages have this Message-ID (diff)
From: "John W. Linville" <linville-2XuSBdqkA4R54TAoqtyWWQ@public.gmane.org>
To: davem-fT/PcQaiUtIeIZ0/mPfg9Q@public.gmane.org
Cc: netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-wireless-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: pull request: wireless-next-2.6 2008-05-22
Date: Thu, 22 May 2008 08:40:17 -0400 [thread overview]
Message-ID: <20080522124017.GA3996@tuxdriver.com> (raw)
Dave,
Another week, another 70+ patches -- actually this pace feels a
bit slow! This batch includes updates to rt2x00, libertas, iwlwifi,
mac80211, and a smattering of other drivers.
Let me know if there are problems!
John
---
Individual patches are available here:
http://www.kernel.org/pub/linux/kernel/people/linville/wireless-next-2.6/
---
The following changes since commit 5b06c85c3b96fa8db632f1ee94f99a2bd0215f3a:
Allan Stephens (1):
tipc: Cosmetic cleanup of topology service code
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6.git master
Atsushi Nemoto (1):
zd1211rw: Use DMA-aware buffer for usb transfer
David Woodhouse (3):
libertas: Increase priority of 'unknown command' warnings
libertas: fix multicast filtering on eth and msh interfaces
libertas: Add reset_card() callback to hardware driver
Emmanuel Grumbach (2):
iwlwifi: don't switch to SGI if not supported by AP
iwlwifi: clean up and bug fix for security
Ester Kummer (1):
iwlwifi: trigger event log from debugfs
Gertjan van Wingerde (2):
rt2x00: Fix queue related oops in case of deselected mac80211 multi-queue feature.
rt2x00: Only initialize the minimum needed fields of PCI TX descriptors.
Gregory Greenman (1):
iwlwifi: get_hw_cmd_size
Harvey Harrison (6):
mac80211: michael.c use kernel-provided infrastructure
mac80211: introduce struct michael_mic_ctx and static helpers
mac80211: add const, remove unused function, make one function static
mac80211: add a struct to hold tkip context
mac80211: tkip.c use struct tkip_ctx in phase 1 key mixing
mac80211: tkip.c use struct tkip_ctx in phase 2 key mixing
Holger Schurig (1):
libertas: reduce command retry time
Ivo van Doorn (9):
rt2x00: trim skb_frame_desc to 32 bytes
rt2x00: Fix TX status reporting
rt2x00: Remove ieee80211_tx_control argument from write_tx_desc()
rt2x00: Preserve descriptor information after memmove()
rt2x00: Split rt2x00lib_write_tx_desc()
rt2x00: Remove redundant flags/dev_flags initializations
rt2x00: Merge RX and TX entry private data
rt2x00: Remove extra +
rt2x00: Release rt2x00 2.1.6
Javier Cardona (3):
libertas: Extend MESH_CONFIG command to access non-volatile configuration
libertas: sysfs interface for accessing non-volatile configuration
libertas: sysfs interface for accessing default mesh channel
Johannes Berg (8):
mac80211: fix bugs in queue handling functions
mac80211: let drivers wake but not start queues
mac80211: use rate index in TX control
mac80211: reorder some transmit handlers
mac80211: move TX info into skb->cb
mac80211: dont allow fragmentation and requeuing on A-MPDU queues
mac80211: use multi-queue master netdevice
mac80211: remove channel use statistics
Larry.Finger-tQ5ms3gMjBLk1uMJSBkQmQ@public.gmane.org (1):
b43: Fix typo in firmware file name for 802.11 cores with rev 13
Michael Buesch (4):
b43: Add hooks for firmware debugging
b43: Allow running without PCM firmware
b43: Add panic reason code that doesn't trigger restart
b43: Add firmware markers support
Pavel Emelyanov (8):
mac80211: Brush up error paths in mesh_path_add.
mac80211: Fix one more call to synchronize_rcu in atomic context.
mac80211: Prepare mesh_table_grow to failing copy_node callback.
mac80211: Report allocation failure from mesh_path_node_copy.
mac80211: Fix sleeping allocation under lock in mesh_path_node_copy.
mac80211: Do not report false error from mesh_path_add.
mac80211: Merge error paths in mesh_table_grow().
mac80211: Consolidate hash kfree-ing in mesh.c.
Ron Rindjunsky (9):
iwlwifi: changing irrelevant comment
iwlwifi: remove iwl4965_nic_start function
mac80211: separate Tx and Rx MCS when configuring HT
iwlwifi: filling Tx MCS set
iwlwifi: rename and move Tx queue activation/deactivation
iwlwifi: add rx_handlers stub for iwl5000
iwlwifi: add ucode loaders for iwl5000
iwlwifi: add ucode init flow handling for iwl5000
iwlwifi: iwl5000 WiFi/WiMax coexistence
Tomas Winkler (13):
iwlwifi: rename iwl4965_queue to iwl_queue
iwlwifi: rename iwl4965_tx_info to iwl_tx_info
iwlwifi: remove 4965 from iwl4965_tx_queue_update_write_ptr
iwlwifi: remove 4965 prefix from iwl4965_frame
iwlwifi: remove 4965 from iwl4965_rate_info
iwlwifi: move iwl_bcast_addr to iwlcore
iwlwifi: move more station managment into iwl-sta.c
iwlwifi: remove 4956 form iwl4965_tx_cmd
iwlwifi: refactor ieee80211_get_qos_ctrl
iwlwifi: move TX code into iwl-tx.c
iwlwifi: remove 4965 remainings in iwl-eeprom.c file
iwlwifi: add debugfs to disable/enable run time calibration
iwlwifi: refactor pci prob flow
drivers/net/wireless/adm8211.c | 35 +-
drivers/net/wireless/adm8211.h | 1 -
drivers/net/wireless/ath5k/base.c | 74 +-
drivers/net/wireless/ath5k/base.h | 1 -
drivers/net/wireless/b43/b43.h | 28 +-
drivers/net/wireless/b43/dma.c | 46 +-
drivers/net/wireless/b43/dma.h | 3 +-
drivers/net/wireless/b43/main.c | 192 ++++-
drivers/net/wireless/b43/pio.c | 36 +-
drivers/net/wireless/b43/pio.h | 8 +-
drivers/net/wireless/b43/xmit.c | 65 +-
drivers/net/wireless/b43/xmit.h | 4 +-
drivers/net/wireless/b43legacy/dma.c | 35 +-
drivers/net/wireless/b43legacy/dma.h | 4 +-
drivers/net/wireless/b43legacy/main.c | 13 +-
drivers/net/wireless/b43legacy/pio.c | 19 +-
drivers/net/wireless/b43legacy/pio.h | 4 +-
drivers/net/wireless/b43legacy/xmit.c | 47 +-
drivers/net/wireless/b43legacy/xmit.h | 2 +-
drivers/net/wireless/iwlwifi/iwl-3945-rs.c | 16 +-
drivers/net/wireless/iwlwifi/iwl-3945.c | 25 +-
drivers/net/wireless/iwlwifi/iwl-3945.h | 3 +-
drivers/net/wireless/iwlwifi/iwl-4965-rs.c | 123 ++--
drivers/net/wireless/iwlwifi/iwl-4965-rs.h | 8 +-
drivers/net/wireless/iwlwifi/iwl-4965.c | 304 ++-------
drivers/net/wireless/iwlwifi/iwl-5000.c | 316 ++++++++-
drivers/net/wireless/iwlwifi/iwl-calib.c | 9 +
drivers/net/wireless/iwlwifi/iwl-calib.h | 4 +-
drivers/net/wireless/iwlwifi/iwl-commands.h | 86 +++-
drivers/net/wireless/iwlwifi/iwl-core.c | 210 +++++-
drivers/net/wireless/iwlwifi/iwl-core.h | 24 +-
drivers/net/wireless/iwlwifi/iwl-debug.h | 10 +-
drivers/net/wireless/iwlwifi/iwl-debugfs.c | 52 ++-
drivers/net/wireless/iwlwifi/iwl-dev.h | 90 ++-
drivers/net/wireless/iwlwifi/iwl-eeprom.c | 23 +-
drivers/net/wireless/iwlwifi/iwl-hcmd.c | 4 +-
drivers/net/wireless/iwlwifi/iwl-helpers.h | 19 +
drivers/net/wireless/iwlwifi/iwl-prph.h | 28 +
drivers/net/wireless/iwlwifi/iwl-sta.c | 294 +++++++-
drivers/net/wireless/iwlwifi/iwl-sta.h | 5 +
drivers/net/wireless/iwlwifi/iwl-tx.c | 651 ++++++++++++++++-
drivers/net/wireless/iwlwifi/iwl3945-base.c | 85 +--
drivers/net/wireless/iwlwifi/iwl4965-base.c | 1067 +++------------------------
drivers/net/wireless/libertas/Makefile | 8 +-
drivers/net/wireless/libertas/assoc.c | 6 +-
drivers/net/wireless/libertas/cmd.c | 105 ++--
drivers/net/wireless/libertas/cmd.h | 3 +
drivers/net/wireless/libertas/cmdresp.c | 5 +-
drivers/net/wireless/libertas/decl.h | 4 +
drivers/net/wireless/libertas/defs.h | 14 +-
drivers/net/wireless/libertas/dev.h | 3 +
drivers/net/wireless/libertas/host.h | 17 +
drivers/net/wireless/libertas/hostcmd.h | 2 +-
drivers/net/wireless/libertas/main.c | 205 ++++--
drivers/net/wireless/libertas/persistcfg.c | 453 ++++++++++++
drivers/net/wireless/libertas/types.h | 30 +
drivers/net/wireless/libertas/wext.c | 5 +-
drivers/net/wireless/p54/p54common.c | 93 +--
drivers/net/wireless/p54/p54common.h | 1 -
drivers/net/wireless/p54/p54pci.c | 2 +-
drivers/net/wireless/rt2x00/rt2400pci.c | 132 ++--
drivers/net/wireless/rt2x00/rt2400pci.h | 5 +
drivers/net/wireless/rt2x00/rt2500pci.c | 120 ++--
drivers/net/wireless/rt2x00/rt2500pci.h | 5 +
drivers/net/wireless/rt2x00/rt2500usb.c | 85 ++--
drivers/net/wireless/rt2x00/rt2500usb.h | 5 +
drivers/net/wireless/rt2x00/rt2x00.h | 52 +-
drivers/net/wireless/rt2x00/rt2x00debug.c | 4 +-
drivers/net/wireless/rt2x00/rt2x00dev.c | 226 +-----
drivers/net/wireless/rt2x00/rt2x00lib.h | 6 +-
drivers/net/wireless/rt2x00/rt2x00mac.c | 76 ++-
drivers/net/wireless/rt2x00/rt2x00pci.c | 103 +--
drivers/net/wireless/rt2x00/rt2x00pci.h | 28 +-
drivers/net/wireless/rt2x00/rt2x00queue.c | 167 ++++-
drivers/net/wireless/rt2x00/rt2x00queue.h | 73 ++-
drivers/net/wireless/rt2x00/rt2x00reg.h | 11 -
drivers/net/wireless/rt2x00/rt2x00usb.c | 228 +++---
drivers/net/wireless/rt2x00/rt2x00usb.h | 26 +-
drivers/net/wireless/rt2x00/rt61pci.c | 133 ++--
drivers/net/wireless/rt2x00/rt61pci.h | 5 +
drivers/net/wireless/rt2x00/rt73usb.c | 59 +-
drivers/net/wireless/rt2x00/rt73usb.h | 5 +
drivers/net/wireless/rtl8180_dev.c | 62 +-
drivers/net/wireless/rtl8187.h | 6 -
drivers/net/wireless/rtl8187_dev.c | 45 +-
drivers/net/wireless/zd1211rw/zd_mac.c | 161 ++---
drivers/net/wireless/zd1211rw/zd_mac.h | 16 -
drivers/net/wireless/zd1211rw/zd_usb.c | 29 +-
include/linux/ieee80211.h | 18 +-
include/net/mac80211.h | 348 +++++-----
net/mac80211/Kconfig | 14 +-
net/mac80211/Makefile | 2 +-
net/mac80211/cfg.c | 4 +-
net/mac80211/debugfs_key.c | 8 +-
net/mac80211/debugfs_netdev.c | 9 -
net/mac80211/debugfs_sta.c | 1 -
net/mac80211/ieee80211_i.h | 76 +--
net/mac80211/iface.c | 2 +-
net/mac80211/key.h | 17 +-
net/mac80211/main.c | 261 ++++----
net/mac80211/mesh.c | 38 +-
net/mac80211/mesh.h | 2 +-
net/mac80211/mesh_pathtbl.c | 53 +-
net/mac80211/michael.c | 106 +--
net/mac80211/michael.h | 8 +-
net/mac80211/mlme.c | 34 +-
net/mac80211/rate.c | 12 +-
net/mac80211/rate.h | 33 +-
net/mac80211/rc80211_pid.h | 4 +-
net/mac80211/rc80211_pid_algo.c | 22 +-
net/mac80211/rc80211_pid_debugfs.c | 8 +-
net/mac80211/rx.c | 72 +--
net/mac80211/sta_info.c | 8 +-
net/mac80211/sta_info.h | 6 +-
net/mac80211/tkip.c | 86 +--
net/mac80211/tkip.h | 4 -
net/mac80211/tx.c | 729 +++++++++----------
net/mac80211/util.c | 59 +-
net/mac80211/wep.c | 9 +-
net/mac80211/wme.c | 28 +-
net/mac80211/wme.h | 2 +-
net/mac80211/wpa.c | 81 +--
122 files changed, 5042 insertions(+), 4024 deletions(-)
create mode 100644 drivers/net/wireless/libertas/persistcfg.c
Omnibus patch available here:
http://www.kernel.org/pub/linux/kernel/people/linville/wireless-next-2.6-2008-05-22.patch.bz2
--
John W. Linville
linville-2XuSBdqkA4R54TAoqtyWWQ@public.gmane.org
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2008-05-22 12:58 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-05-22 12:40 John W. Linville [this message]
2008-05-22 12:40 ` pull request: wireless-next-2.6 2008-05-22 John W. Linville
2008-06-03 18:53 ` John W. Linville
2008-06-03 18:53 ` John W. Linville
2008-06-03 19:49 ` pull request: wireless-next-2.6 2008-06-03 John W. Linville
2008-06-03 19:49 ` John W. Linville
2008-06-09 20:42 ` John W. Linville
2008-06-09 20:42 ` John W. Linville
2008-06-09 21:07 ` pull request: wireless-next-2.6 2008-06-09 John W. Linville
2008-06-09 21:07 ` John W. Linville
2008-06-10 9:19 ` David Miller
2008-06-10 12:17 ` John W. Linville
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080522124017.GA3996@tuxdriver.com \
--to=linville@tuxdriver.com \
--cc=davem@davemloft.net \
--cc=linux-wireless@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.