From: Anton Vorontsov <avorontsov-hkdhdckH98+B+jHODAdFcQ@public.gmane.org>
To: Chen Gong <G.Chen-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
Cc: David Brownell
<dbrownell-Rn4VEauK+AKRv+LV9MX5uipxlwaOVQ5f@public.gmane.org>,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linuxppc-dev-mnsaURCQ41sdnm+yROfE0A@public.gmane.org,
spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org,
Tabi Timur <timur-KZfg59tc24xl57MIdRCFDg@public.gmane.org>,
Pierre Ossman
<drzeus-mmc-p3sGCRWkH8CeZLLa646FqQ@public.gmane.org>
Subject: Re: [PATCH 3/4] [MMC] mmc_spi: add polling support for the carddetectline
Date: Mon, 26 May 2008 19:37:47 +0400 [thread overview]
Message-ID: <20080526153747.GA31663@polina.dev.rtsoft.ru> (raw)
In-Reply-To: <58A20A281BAF1047B4EAE68DE5C0BDC2F176EF-bKEhWGtIRULiD3AT8lUqWFjVikpgYyvb5NbjCUgZEJk@public.gmane.org>
On Thu, May 22, 2008 at 09:44:57PM +0800, Chen Gong wrote:
[...]
> > > I want to know whether every card working well ? Because
> > I'm working
> > > For 83xx MMC-over-SPI support, the presented concrete
> > methods I used
> > > as you do, but only 256M card seems good, 512M or 1G/2G
> > card all have
> > > some problems
> >
> > So far I don't have cards larger than 256M. Will try to get
> > one though.
> >
> Thanks, if you have any new test report pls contact me.
Just tested with Apacer 1GB MicroSD (connected through dumb adapter),
it works quite well here. I've successfully wrote 10 mb file onto ext2
formatted partition...
> BTW, a fews days ago Joakim Tjernlund made a heavy fix for
> spi_mpc83xx.c to resolve clock glitch. But it looks no any impact
> for me, but maybe it has positive effect for you.
Yup, I use it.
Btw, which mmc driver are you using? The one from MPC8610HPCD
BSP or mainline's mmc_spi?
--
Anton Vorontsov
email: cbouatmailru-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org
irc://irc.freenode.net/bd2
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
WARNING: multiple messages have this Message-ID (diff)
From: Anton Vorontsov <avorontsov@ru.mvista.com>
To: Chen Gong <G.Chen@freescale.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>,
linux-kernel@vger.kernel.org, linuxppc-dev@ozlabs.org,
spi-devel-general@lists.sourceforge.net,
Tabi Timur <timur@freescale.com>,
Pierre Ossman <drzeus-mmc@drzeus.cx>
Subject: Re: [PATCH 3/4] [MMC] mmc_spi: add polling support for the carddetectline
Date: Mon, 26 May 2008 19:37:47 +0400 [thread overview]
Message-ID: <20080526153747.GA31663@polina.dev.rtsoft.ru> (raw)
In-Reply-To: <58A20A281BAF1047B4EAE68DE5C0BDC2F176EF@zch01exm21.fsl.freescale.net>
On Thu, May 22, 2008 at 09:44:57PM +0800, Chen Gong wrote:
[...]
> > > I want to know whether every card working well ? Because
> > I'm working
> > > For 83xx MMC-over-SPI support, the presented concrete
> > methods I used
> > > as you do, but only 256M card seems good, 512M or 1G/2G
> > card all have
> > > some problems
> >
> > So far I don't have cards larger than 256M. Will try to get
> > one though.
> >
> Thanks, if you have any new test report pls contact me.
Just tested with Apacer 1GB MicroSD (connected through dumb adapter),
it works quite well here. I've successfully wrote 10 mb file onto ext2
formatted partition...
> BTW, a fews days ago Joakim Tjernlund made a heavy fix for
> spi_mpc83xx.c to resolve clock glitch. But it looks no any impact
> for me, but maybe it has positive effect for you.
Yup, I use it.
Btw, which mmc driver are you using? The one from MPC8610HPCD
BSP or mainline's mmc_spi?
--
Anton Vorontsov
email: cbouatmailru@gmail.com
irc://irc.freenode.net/bd2
WARNING: multiple messages have this Message-ID (diff)
From: Anton Vorontsov <avorontsov@ru.mvista.com>
To: Chen Gong <G.Chen@freescale.com>
Cc: Kumar Gala <galak@kernel.crashing.org>,
David Brownell <dbrownell@users.sourceforge.net>,
Pierre Ossman <drzeus-mmc@drzeus.cx>,
linuxppc-dev@ozlabs.org, spi-devel-general@lists.sourceforge.net,
linux-kernel@vger.kernel.org, Tabi Timur <timur@freescale.com>
Subject: Re: [PATCH 3/4] [MMC] mmc_spi: add polling support for the carddetectline
Date: Mon, 26 May 2008 19:37:47 +0400 [thread overview]
Message-ID: <20080526153747.GA31663@polina.dev.rtsoft.ru> (raw)
In-Reply-To: <58A20A281BAF1047B4EAE68DE5C0BDC2F176EF@zch01exm21.fsl.freescale.net>
On Thu, May 22, 2008 at 09:44:57PM +0800, Chen Gong wrote:
[...]
> > > I want to know whether every card working well ? Because
> > I'm working
> > > For 83xx MMC-over-SPI support, the presented concrete
> > methods I used
> > > as you do, but only 256M card seems good, 512M or 1G/2G
> > card all have
> > > some problems
> >
> > So far I don't have cards larger than 256M. Will try to get
> > one though.
> >
> Thanks, if you have any new test report pls contact me.
Just tested with Apacer 1GB MicroSD (connected through dumb adapter),
it works quite well here. I've successfully wrote 10 mb file onto ext2
formatted partition...
> BTW, a fews days ago Joakim Tjernlund made a heavy fix for
> spi_mpc83xx.c to resolve clock glitch. But it looks no any impact
> for me, but maybe it has positive effect for you.
Yup, I use it.
Btw, which mmc driver are you using? The one from MPC8610HPCD
BSP or mainline's mmc_spi?
--
Anton Vorontsov
email: cbouatmailru@gmail.com
irc://irc.freenode.net/bd2
next prev parent reply other threads:[~2008-05-26 15:37 UTC|newest]
Thread overview: 72+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-05-16 16:50 [PATCH 3/4] [MMC] mmc_spi: add polling support for the card detect line Anton Vorontsov
2008-05-16 16:50 ` Anton Vorontsov
[not found] ` <20080516165057.GC24196-PHTr8nzUCjejyJ0x5qLZdcN33GVbZNy3@public.gmane.org>
2008-05-17 11:36 ` Pierre Ossman
2008-05-17 11:36 ` Pierre Ossman
2008-05-17 11:36 ` Pierre Ossman
[not found] ` <20080517133633.5aa26938-OhHrUh4vRMSnewYJFaQfwJ5kstrrjoWp@public.gmane.org>
2008-05-21 18:47 ` Anton Vorontsov
2008-05-21 18:47 ` Anton Vorontsov
2008-05-21 18:47 ` Anton Vorontsov
[not found] ` <20080521184713.GA30284-PHTr8nzUCjejyJ0x5qLZdcN33GVbZNy3@public.gmane.org>
2008-05-21 18:47 ` [PATCH 1/2] mmc: add support for card-detection polling Anton Vorontsov
2008-05-21 18:47 ` Anton Vorontsov
2008-05-21 18:47 ` Anton Vorontsov
2008-05-21 18:47 ` [PATCH 2/2] mmc_spi: " Anton Vorontsov
2008-05-21 18:47 ` Anton Vorontsov
2008-05-21 18:47 ` Anton Vorontsov
2008-05-21 19:28 ` [PATCH 3/4] [MMC] mmc_spi: add polling support for the card detect line Pierre Ossman
2008-05-21 19:28 ` Pierre Ossman
2008-05-22 18:17 ` Anton Vorontsov
2008-05-22 18:17 ` Anton Vorontsov
[not found] ` <20080522181713.GA26918-PHTr8nzUCjejyJ0x5qLZdcN33GVbZNy3@public.gmane.org>
2008-05-22 18:18 ` [PATCH 1/3] mmc: add support for card-detection polling Anton Vorontsov
2008-05-22 18:18 ` Anton Vorontsov
2008-05-22 18:18 ` Anton Vorontsov
2008-05-22 18:18 ` [PATCH 2/3] mmc_spi: " Anton Vorontsov
2008-05-22 18:18 ` Anton Vorontsov
2008-05-22 18:18 ` Anton Vorontsov
2008-05-22 19:34 ` [PATCH 3/4] [MMC] mmc_spi: add polling support for the card detect line Pierre Ossman
2008-05-22 19:34 ` Pierre Ossman
2008-05-23 15:42 ` Anton Vorontsov
2008-05-23 15:42 ` Anton Vorontsov
2008-05-23 15:43 ` [PATCH 1/3] mmc: add support for card-detection polling Anton Vorontsov
2008-05-23 15:43 ` Anton Vorontsov
[not found] ` <20080523154340.GA24862-PHTr8nzUCjejyJ0x5qLZdcN33GVbZNy3@public.gmane.org>
2008-06-01 10:23 ` Pierre Ossman
2008-06-01 10:23 ` Pierre Ossman
[not found] ` <20080523154204.GA19803-PHTr8nzUCjejyJ0x5qLZdcN33GVbZNy3@public.gmane.org>
2008-05-23 15:43 ` [PATCH 2/3] mmc_spi: " Anton Vorontsov
2008-05-23 15:43 ` Anton Vorontsov
2008-05-23 15:43 ` Anton Vorontsov
2008-05-23 15:43 ` [PATCH 3/3] mmc: change .get_ro() callback semantics Anton Vorontsov
2008-05-23 15:43 ` Anton Vorontsov
2008-05-23 15:43 ` Anton Vorontsov
[not found] ` <20080523154347.GC24862-PHTr8nzUCjejyJ0x5qLZdcN33GVbZNy3@public.gmane.org>
2008-06-03 10:07 ` Marc Pignat
2008-06-03 10:07 ` Marc Pignat
2008-06-03 10:07 ` Marc Pignat
2008-06-05 14:43 ` Anton Vorontsov
2008-06-05 14:43 ` Anton Vorontsov
[not found] ` <20080605144310.GA31596-PHTr8nzUCjejyJ0x5qLZdcN33GVbZNy3@public.gmane.org>
2008-06-05 15:58 ` Marc Pignat
2008-06-05 15:58 ` Marc Pignat
2008-06-05 15:58 ` Marc Pignat
2008-06-05 17:10 ` [PATCH] mmc: toughen get_ro() and get_cd() return values Anton Vorontsov
2008-06-05 17:10 ` Anton Vorontsov
[not found] ` <20080605171013.GA10513-PHTr8nzUCjejyJ0x5qLZdcN33GVbZNy3@public.gmane.org>
2008-06-14 14:36 ` Pierre Ossman
2008-06-14 14:36 ` Pierre Ossman
2008-06-17 14:16 ` Anton Vorontsov
2008-06-17 14:17 ` [PATCH 1/3] mmc: add support for card-detection polling Anton Vorontsov
2008-06-17 14:17 ` [PATCH 2/3] mmc_spi: " Anton Vorontsov
2008-06-17 14:17 ` [PATCH 3/3] mmc: change .get_ro() callback semantics Anton Vorontsov
2008-06-20 15:40 ` [PATCH] mmc: toughen get_ro() and get_cd() return values Pierre Ossman
2008-05-22 18:18 ` [PATCH 3/3] mmc: change .get_ro() callback semantics Anton Vorontsov
2008-05-22 18:18 ` Anton Vorontsov
2008-05-19 3:02 ` [PATCH 3/4] [MMC] mmc_spi: add polling support for the card detectline Chen Gong
2008-05-19 3:02 ` Chen Gong
2008-05-19 3:02 ` Chen Gong
[not found] ` <58A20A281BAF1047B4EAE68DE5C0BDC2F16E6A-bKEhWGtIRULiD3AT8lUqWFjVikpgYyvb5NbjCUgZEJk@public.gmane.org>
2008-05-22 12:38 ` Anton Vorontsov
2008-05-22 12:38 ` Anton Vorontsov
2008-05-22 12:38 ` Anton Vorontsov
[not found] ` <20080522123838.GA27149-PHTr8nzUCjejyJ0x5qLZdcN33GVbZNy3@public.gmane.org>
2008-05-22 13:44 ` [PATCH 3/4] [MMC] mmc_spi: add polling support for the carddetectline Chen Gong
2008-05-22 13:44 ` Chen Gong
2008-05-22 13:44 ` Chen Gong
[not found] ` <58A20A281BAF1047B4EAE68DE5C0BDC2F176EF-bKEhWGtIRULiD3AT8lUqWFjVikpgYyvb5NbjCUgZEJk@public.gmane.org>
2008-05-26 15:37 ` Anton Vorontsov [this message]
2008-05-26 15:37 ` Anton Vorontsov
2008-05-26 15:37 ` Anton Vorontsov
[not found] ` <20080526153747.GA31663-PHTr8nzUCjejyJ0x5qLZdcN33GVbZNy3@public.gmane.org>
2008-05-27 2:11 ` [PATCH 3/4] [MMC] mmc_spi: add polling support for thecarddetectline Chen Gong
2008-05-27 2:11 ` Chen Gong
2008-05-27 2:11 ` Chen Gong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080526153747.GA31663@polina.dev.rtsoft.ru \
--to=avorontsov-hkdhdckh98+b+jhodadfcq@public.gmane.org \
--cc=G.Chen-KZfg59tc24xl57MIdRCFDg@public.gmane.org \
--cc=dbrownell-Rn4VEauK+AKRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \
--cc=drzeus-mmc-p3sGCRWkH8CeZLLa646FqQ@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linuxppc-dev-mnsaURCQ41sdnm+yROfE0A@public.gmane.org \
--cc=spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \
--cc=timur-KZfg59tc24xl57MIdRCFDg@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.