From: Jean Delvare <khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org>
To: Linux I2C <i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org>
Cc: David Brownell <david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org>
Subject: [PATCH 4/4] i2c: Use i2c_listener in driver lm75
Date: Wed, 4 Jun 2008 20:35:47 +0200 [thread overview]
Message-ID: <20080604203547.2530182e@hyperion.delvare> (raw)
In-Reply-To: <20080604201334.19636f30-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
Replace the legacy lm75 i2c_driver by an i2c_listener.
Signed-off-by: Jean Delvare <khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org>
---
This goes on top of David Brownell's patches:
http://lists.lm-sensors.org/pipermail/lm-sensors/2008-April/022931.html
http://lists.lm-sensors.org/pipermail/lm-sensors/2008-May/023040.html
http://lists.lm-sensors.org/pipermail/lm-sensors/2008-May/023041.html
Also available from:
http://jdelvare.pck.nerim.net/sensors/lm75/
David, any chance you could test this one? Thanks.
drivers/hwmon/lm75.c | 64 ++++++++++----------------------------------------
1 file changed, 14 insertions(+), 50 deletions(-)
--- linux-2.6.26-rc4.orig/drivers/hwmon/lm75.c 2008-06-04 11:44:57.000000000 +0200
+++ linux-2.6.26-rc4/drivers/hwmon/lm75.c 2008-06-04 11:49:24.000000000 +0200
@@ -54,11 +54,11 @@ enum lm75_type { /* keep sorted in alph
tmp75,
};
-/* Addresses scanned by legacy style driver binding */
+/* Addresses scanned by listener */
static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, 0x4c,
0x4d, 0x4e, 0x4f, I2C_CLIENT_END };
-/* Insmod parameters (only for legacy style driver binding) */
+/* Insmod parameters (for listener) */
I2C_CLIENT_INSMOD_1(lm75);
@@ -247,16 +247,12 @@ static struct i2c_driver lm75_driver = {
/*-----------------------------------------------------------------------*/
-/* "Legacy" I2C driver binding */
-
-static struct i2c_driver lm75_legacy_driver;
-
-/* This function is called by i2c_probe */
-static int lm75_detect(struct i2c_adapter *adapter, int address, int kind)
+static int lm75_detect(struct i2c_adapter *adapter, int address, int kind,
+ struct i2c_board_info *info)
{
int i;
struct i2c_client *new_client;
- int err = 0;
+ int err = -ENODEV;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
I2C_FUNC_SMBUS_WORD_DATA))
@@ -273,8 +269,6 @@ static int lm75_detect(struct i2c_adapte
new_client->addr = address;
new_client->adapter = adapter;
- new_client->driver = &lm75_legacy_driver;
- new_client->flags = 0;
/* Now, we do the remaining detection. There is no identification-
dedicated register so we have to rely on several tricks:
@@ -313,52 +307,24 @@ static int lm75_detect(struct i2c_adapte
|| i2c_smbus_read_word_data(new_client, i + 3) != os)
goto exit_free;
}
+ err = 0; /* detection OK */
/* NOTE: we treat "force=..." and "force_lm75=..." the same.
* Only new-style driver binding distinguishes chip types.
*/
- strlcpy(new_client->name, "lm75", I2C_NAME_SIZE);
-
- /* Tell the I2C layer a new client has arrived */
- err = i2c_attach_client(new_client);
- if (err)
- goto exit_free;
-
- err = lm75_probe(new_client, NULL);
- if (err < 0)
- goto exit_detach;
+ strlcpy(info->type, "lm75", I2C_NAME_SIZE);
+ info->addr = address;
- return 0;
-
-exit_detach:
- i2c_detach_client(new_client);
exit_free:
kfree(new_client);
exit:
return err;
}
-static int lm75_attach_adapter(struct i2c_adapter *adapter)
-{
- if (!(adapter->class & I2C_CLASS_HWMON))
- return 0;
- return i2c_probe(adapter, &addr_data, lm75_detect);
-}
-
-static int lm75_detach_client(struct i2c_client *client)
-{
- lm75_remove(client);
- i2c_detach_client(client);
- kfree(client);
- return 0;
-}
-
-static struct i2c_driver lm75_legacy_driver = {
- .driver = {
- .name = "lm75_legacy",
- },
- .attach_adapter = lm75_attach_adapter,
- .detach_client = lm75_detach_client,
+static struct i2c_listener lm75_listener = {
+ .class = I2C_CLASS_HWMON,
+ .address_data = &addr_data,
+ .detect = lm75_detect,
};
/*-----------------------------------------------------------------------*/
@@ -430,16 +396,14 @@ static int __init sensors_lm75_init(void
if (status < 0)
return status;
- status = i2c_add_driver(&lm75_legacy_driver);
- if (status < 0)
- i2c_del_driver(&lm75_driver);
+ i2c_add_listener(&lm75_listener);
return status;
}
static void __exit sensors_lm75_exit(void)
{
- i2c_del_driver(&lm75_legacy_driver);
+ i2c_del_listener(&lm75_listener);
i2c_del_driver(&lm75_driver);
}
--
Jean Delvare
_______________________________________________
i2c mailing list
i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org
http://lists.lm-sensors.org/mailman/listinfo/i2c
next prev parent reply other threads:[~2008-06-04 18:35 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-06-04 18:13 [PATCH 0/4] i2c: Introduce i2c listeners Jean Delvare
[not found] ` <20080604201334.19636f30-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
2008-06-04 18:18 ` [PATCH 1/4] " Jean Delvare
2008-06-04 18:31 ` [PATCH 2/4] i2c: Convert the lm90 driver to a new-style i2c driver Jean Delvare
2008-06-04 18:33 ` [PATCH 3/4] i2c: Use i2c_listener in driver f75375s Jean Delvare
[not found] ` <20080604203322.472f8653-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
2008-06-05 8:33 ` Riku Voipio
[not found] ` <4847A4E2.9040406-WgUW+8SLYMv1KXRcyAk9cg@public.gmane.org>
2008-06-05 9:06 ` Jean Delvare
[not found] ` <20080605110659.3456fbe4-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
2008-06-06 10:21 ` Riku Voipio
[not found] ` <48490FA3.8020702-WgUW+8SLYMv1KXRcyAk9cg@public.gmane.org>
2008-06-06 11:38 ` Jean Delvare
2008-06-04 18:35 ` Jean Delvare [this message]
2008-06-04 18:55 ` [PATCH 0/4] i2c: Introduce i2c listeners Jon Smirl
[not found] ` <9e4733910806041155n7551ac74lf29c8a32163ec09a-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2008-06-04 19:28 ` Jon Smirl
[not found] ` <9e4733910806041228i330e145q439d3ee43494f4c4-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2008-06-04 21:33 ` Jean Delvare
[not found] ` <20080604233335.13459512-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
2008-06-04 23:11 ` Jon Smirl
[not found] ` <9e4733910806041611l41832e07p4f55424be0ef5ea0-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2008-06-05 0:10 ` David Brownell
[not found] ` <200806041710.59338.david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org>
2008-06-05 0:42 ` Jon Smirl
[not found] ` <9e4733910806041742va67401en608c8c4b8c4c11b9-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2008-06-05 2:21 ` David Brownell
[not found] ` <200806041921.26293.david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org>
2008-06-05 4:04 ` Jon Smirl
[not found] ` <9e4733910806042104l70cf8a30sc6329b1c3016c879-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2008-06-05 8:18 ` David Brownell
[not found] ` <200806050118.23706.david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org>
2008-06-05 14:55 ` Jon Smirl
[not found] ` <9e4733910806050755n3835d20xfc4d018c2222d5d3-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2008-06-05 17:00 ` Jean Delvare
[not found] ` <20080605190034.16f06604-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
2008-06-05 17:34 ` Jon Smirl
[not found] ` <9e4733910806051034k2e40082focaaa03b124fcd4ad-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2008-06-05 18:29 ` Jean Delvare
2008-06-05 8:49 ` Jean Delvare
[not found] ` <20080605104914.2dd622b2-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
2008-06-05 14:30 ` Jon Smirl
2008-06-05 8:38 ` Jean Delvare
2008-06-05 9:05 ` Jean Delvare
[not found] ` <20080605110502.76f0f606-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
2008-06-05 14:59 ` Jon Smirl
2008-06-05 0:03 ` Trent Piepho
[not found] ` <Pine.LNX.4.58.0806041638080.10290-13q4cmjDBaTP3RPoUHIrnuTW4wlIGRCZ@public.gmane.org>
2008-06-05 0:27 ` David Brownell
[not found] ` <200806041727.51746.david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org>
2008-06-05 0:40 ` Trent Piepho
[not found] ` <Pine.LNX.4.58.0806041731250.10290-13q4cmjDBaTP3RPoUHIrnuTW4wlIGRCZ@public.gmane.org>
2008-06-05 2:14 ` David Brownell
[not found] ` <200806041914.27291.david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org>
2008-06-05 7:08 ` Trent Piepho
[not found] ` <Pine.LNX.4.58.0806042349251.10290-13q4cmjDBaTP3RPoUHIrnuTW4wlIGRCZ@public.gmane.org>
2008-06-05 8:15 ` David Brownell
2008-06-05 8:16 ` Jean Delvare
2008-06-05 0:45 ` Jon Smirl
2008-06-04 21:12 ` Jean Delvare
2008-06-06 2:47 ` David Brownell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080604203547.2530182e@hyperion.delvare \
--to=khali-puyad+kwke1g9huczpvpmw@public.gmane.org \
--cc=david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org \
--cc=i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.