From: Jean Delvare <khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org>
To: Riku Voipio <riku.voipio-WgUW+8SLYMv1KXRcyAk9cg@public.gmane.org>
Cc: David Brownell <david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org>,
Linux I2C <i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org>
Subject: Re: [PATCH 3/4] i2c: Use i2c_listener in driver f75375s
Date: Thu, 5 Jun 2008 11:06:59 +0200 [thread overview]
Message-ID: <20080605110659.3456fbe4@hyperion.delvare> (raw)
In-Reply-To: <4847A4E2.9040406-WgUW+8SLYMv1KXRcyAk9cg@public.gmane.org>
On Thu, 05 Jun 2008 11:33:38 +0300, Riku Voipio wrote:
> Jean Delvare wrote:
> > Replace the legacy f75375s i2c_driver by an i2c_listener.
> >
> > Signed-off-by: Jean Delvare <khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org>
> > ---
> > Riku, any chance you could test this one? Thanks.
> >
> I can test that the new style driver still works after these tests,
> but I don't have testing if the driver still works in
> cases were f75375_legacy driver used to work (which I guess is what
> you are interested in) is tricker. I do however like the concept.
I have already tested the latter, using i2c-stub + a dump of a F75375S
chip. So if you can test the former (new-style) we cover the whole set
of possibilities and that's alright :)
Thanks,
--
Jean Delvare
_______________________________________________
i2c mailing list
i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org
http://lists.lm-sensors.org/mailman/listinfo/i2c
next prev parent reply other threads:[~2008-06-05 9:06 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-06-04 18:13 [PATCH 0/4] i2c: Introduce i2c listeners Jean Delvare
[not found] ` <20080604201334.19636f30-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
2008-06-04 18:18 ` [PATCH 1/4] " Jean Delvare
2008-06-04 18:31 ` [PATCH 2/4] i2c: Convert the lm90 driver to a new-style i2c driver Jean Delvare
2008-06-04 18:33 ` [PATCH 3/4] i2c: Use i2c_listener in driver f75375s Jean Delvare
[not found] ` <20080604203322.472f8653-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
2008-06-05 8:33 ` Riku Voipio
[not found] ` <4847A4E2.9040406-WgUW+8SLYMv1KXRcyAk9cg@public.gmane.org>
2008-06-05 9:06 ` Jean Delvare [this message]
[not found] ` <20080605110659.3456fbe4-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
2008-06-06 10:21 ` Riku Voipio
[not found] ` <48490FA3.8020702-WgUW+8SLYMv1KXRcyAk9cg@public.gmane.org>
2008-06-06 11:38 ` Jean Delvare
2008-06-04 18:35 ` [PATCH 4/4] i2c: Use i2c_listener in driver lm75 Jean Delvare
2008-06-04 18:55 ` [PATCH 0/4] i2c: Introduce i2c listeners Jon Smirl
[not found] ` <9e4733910806041155n7551ac74lf29c8a32163ec09a-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2008-06-04 19:28 ` Jon Smirl
[not found] ` <9e4733910806041228i330e145q439d3ee43494f4c4-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2008-06-04 21:33 ` Jean Delvare
[not found] ` <20080604233335.13459512-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
2008-06-04 23:11 ` Jon Smirl
[not found] ` <9e4733910806041611l41832e07p4f55424be0ef5ea0-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2008-06-05 0:10 ` David Brownell
[not found] ` <200806041710.59338.david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org>
2008-06-05 0:42 ` Jon Smirl
[not found] ` <9e4733910806041742va67401en608c8c4b8c4c11b9-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2008-06-05 2:21 ` David Brownell
[not found] ` <200806041921.26293.david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org>
2008-06-05 4:04 ` Jon Smirl
[not found] ` <9e4733910806042104l70cf8a30sc6329b1c3016c879-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2008-06-05 8:18 ` David Brownell
[not found] ` <200806050118.23706.david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org>
2008-06-05 14:55 ` Jon Smirl
[not found] ` <9e4733910806050755n3835d20xfc4d018c2222d5d3-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2008-06-05 17:00 ` Jean Delvare
[not found] ` <20080605190034.16f06604-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
2008-06-05 17:34 ` Jon Smirl
[not found] ` <9e4733910806051034k2e40082focaaa03b124fcd4ad-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2008-06-05 18:29 ` Jean Delvare
2008-06-05 8:49 ` Jean Delvare
[not found] ` <20080605104914.2dd622b2-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
2008-06-05 14:30 ` Jon Smirl
2008-06-05 8:38 ` Jean Delvare
2008-06-05 9:05 ` Jean Delvare
[not found] ` <20080605110502.76f0f606-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
2008-06-05 14:59 ` Jon Smirl
2008-06-05 0:03 ` Trent Piepho
[not found] ` <Pine.LNX.4.58.0806041638080.10290-13q4cmjDBaTP3RPoUHIrnuTW4wlIGRCZ@public.gmane.org>
2008-06-05 0:27 ` David Brownell
[not found] ` <200806041727.51746.david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org>
2008-06-05 0:40 ` Trent Piepho
[not found] ` <Pine.LNX.4.58.0806041731250.10290-13q4cmjDBaTP3RPoUHIrnuTW4wlIGRCZ@public.gmane.org>
2008-06-05 2:14 ` David Brownell
[not found] ` <200806041914.27291.david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org>
2008-06-05 7:08 ` Trent Piepho
[not found] ` <Pine.LNX.4.58.0806042349251.10290-13q4cmjDBaTP3RPoUHIrnuTW4wlIGRCZ@public.gmane.org>
2008-06-05 8:15 ` David Brownell
2008-06-05 8:16 ` Jean Delvare
2008-06-05 0:45 ` Jon Smirl
2008-06-04 21:12 ` Jean Delvare
2008-06-06 2:47 ` David Brownell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080605110659.3456fbe4@hyperion.delvare \
--to=khali-puyad+kwke1g9huczpvpmw@public.gmane.org \
--cc=david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org \
--cc=i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org \
--cc=riku.voipio-WgUW+8SLYMv1KXRcyAk9cg@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.