From: Chris Clayton <chris2553@googlemail.com>
To: James Bottomley <James.Bottomley@hansenpartnership.com>
Cc: Andrew Morton <akpm@linux-foundation.org>,
LKML <linux-kernel@vger.kernel.org>,
linux-scsi@vger.kernel.org, Hannes Reinecke <hare@suse.de>,
"Rafael J. Wysocki" <rjw@sisk.pl>
Subject: Re: 2,6.26-rc4-git2 - long pause during boot
Date: Fri, 6 Jun 2008 17:35:35 +0000 [thread overview]
Message-ID: <200806061735.35268.chris2553@googlemail.com> (raw)
In-Reply-To: <1212761485.3466.6.camel@localhost.localdomain>
[-- Attachment #1: Type: text/plain, Size: 3364 bytes --]
On Friday 06 June 2008, James Bottomley wrote:
> On Fri, 2008-06-06 at 06:07 +0000, Chris Clayton wrote:
> > On Friday 06 June 2008, Andrew Morton wrote:
> > > On Sun, 1 Jun 2008 04:15:05 +0000 Chris Clayton
> > > <chris2553@googlemail.com>
> >
> > wrote:
> > > > Hi,
> > > >
> > > > I've just started testing 2.6.26 on my desktop machine and have found
> > > > that I get a long pause (20 seconds or so) as the system boots. By
> > > > pause I mean that the boot messages that normally scroll by stop
> > > > doing so for, as I say, about 20 seconds.
> > > >
> > > > I've done a bisect and arrived at:
> > > >
> > > > b0ed43360fdca227048d88a08290365cb681c1a8 is first bad commit
> > > > commit b0ed43360fdca227048d88a08290365cb681c1a8
> > > > Author: Hannes Reinecke <hare@suse.de>
> > > > Date: Tue Mar 18 14:32:28 2008 +0100
> > > >
> > > > [SCSI] add scsi_host and scsi_target to scsi_bus
> > > >
> > > > This patch implements scsi_host and scsi_target device types
> > > > and adds both to the scsi_bus.
> > > >
> > > > Signed-off-by: Hannes Reinecke <hare@suse.de>
> > > > Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
> > > > Signed-off-by: James Bottomley
> > > > <James.Bottomley@HansenPartnership.com>
> > > >
> > > > :040000 040000 4e3140909966b4c9aa987d34ee4078d283fe0351
> > > >
> > > > 46e4fd28cc537ba700eb4f5652abf043fed4d76d M drivers
> > > >
> > > > The config file for that kernel is attached as are the kernel log for
> > > > booting that kernel and the bisect log.
> > > >
> > > > I've also noticed that it takes much longer for icons to appear on my
> > > > desktop when I plug a usb storage device in. (The icons are
> > > > shown/hidden by a simple sctript that is run via udev when the device
> > > > is
> > > > attached/detached.)
> > >
> > > Do you believe that this is the same period? 20 seconds?
> >
> > Thanks for the reply, Andrew. I was beginning to think that I'd committed
> > an LKML sin :-)
> >
> > Yes, it is about the same. On 2.6.25.4 (and earlier), the icons appear
> > within a second or two, but with 2.6.26-rc2 or later, it takes about 20
> > seconds. I've now built and installed -rc5 and am seeing the same
> > behaviour.
> >
> > I've also built -rc5 on my laptop. On that my kernel uses the older IDE
> > drivers rather than libata. The boot proceeds with no pause, but I do see
> > the same delay in the desktop icons appearing when I attach a usb-storage
> > device.
> >
> > > > Let me know of any way I can help solve this.
> > > >
> > > > Please cc me to any reply as I'm not subscribed.
> > >
> > > cc's added.
> > >
> > > Rafael, we might need to track this as a post-2.6.26 regression.
>
> It already is ... as I asked in the actual bug (but no-one seems to have
> noticed, so I assume the bug entry isn't set up correctly). Does this
> still persist with 2.6.26-rc5? The reason for asking is that it looks
> very much like a silent manifestation of our scsi_bus_uevent() problem
> that got fixed in 2.6.26-rc5.
>
Yes, I still get the boot pause and the delay in desktop icons appearing when a
usb-storage device is plugged in with -rc5. A boot log is attached. Is there
some sort of verbose scsi boot messaging that I can switch on? I've looked but
I'm damned if I can find anything in 'make menuconfig'.
Chris
> James
--
Beauty is in the eye of the beerholder.
[-- Attachment #2: kernel.log --]
[-- Type: text/x-log, Size: 46618 bytes --]
Jun 6 17:25:18 upstairs kernel: klogd 1.3-3, log source = /proc/kmsg started.
Jun 6 17:25:18 upstairs kernel: Inspecting /boot/System.map-2.6.26-rc5
Jun 6 17:25:19 upstairs kernel: Loaded 26357 symbols from /boot/System.map-2.6.26-rc5.
Jun 6 17:25:19 upstairs kernel: Symbols match kernel version 2.6.26.
Jun 6 17:25:19 upstairs kernel: No module symbols loaded - kernel modules not enabled.
Jun 6 17:25:19 upstairs kernel: 1cf8 flags 0x1
Jun 6 17:25:19 upstairs kernel: pnp 00:05: dma bitmask 0xe flags 0x0
Jun 6 17:25:19 upstairs kernel: pnp 00:05: io min 0x370 max 0x370 align 1 size 6 flags 0x1
Jun 6 17:25:19 upstairs kernel: pnp 00:05: io min 0x377 max 0x377 align 1 size 1 flags 0x1
Jun 6 17:25:19 upstairs kernel: pnp 00:05: end dependent options
Jun 6 17:25:19 upstairs kernel: pnp 00:05: Plug and Play ACPI device, IDs PNP0700 (active)
Jun 6 17:25:19 upstairs kernel: pnp 00:06: parse allocated resources
Jun 6 17:25:19 upstairs kernel: pnp 00:06: add io 0x378-0x37f flags 0x1
Jun 6 17:25:19 upstairs kernel: pnp 00:06: add io 0x778-0x77b flags 0x1
Jun 6 17:25:19 upstairs kernel: pnp 00:06: add irq 7 flags 0x1
Jun 6 17:25:19 upstairs kernel: pnp 00:06: add dma 3 flags 0x0
Jun 6 17:25:19 upstairs kernel: pnp 00:06: parse resource options
Jun 6 17:25:19 upstairs kernel: pnp 00:06: new independent option
Jun 6 17:25:19 upstairs kernel: pnp 00:06: new dependent option (priority 0x0)
Jun 6 17:25:19 upstairs kernel: pnp 00:06: io min 0x378 max 0x378 align 1 size 8 flags 0x1
Jun 6 17:25:19 upstairs kernel: pnp 00:06: io min 0x778 max 0x778 align 1 size 4 flags 0x1
Jun 6 17:25:19 upstairs kernel: pnp 00:06: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000080 flags 0x1
Jun 6 17:25:19 upstairs kernel: pnp 00:06: dma bitmask 0x8 flags 0x0
Jun 6 17:25:19 upstairs kernel: pnp 00:06: new dependent option (priority 0x1)
Jun 6 17:25:19 upstairs kernel: pnp 00:06: io min 0x378 max 0x378 align 1 size 8 flags 0x1
Jun 6 17:25:19 upstairs kernel: pnp 00:06: io min 0x778 max 0x778 align 1 size 4 flags 0x1
Jun 6 17:25:19 upstairs kernel: pnp 00:06: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001cf8 flags 0x1
Jun 6 17:25:19 upstairs kernel: pnp 00:06: dma bitmask 0xb flags 0x0
Jun 6 17:25:19 upstairs kernel: pnp 00:06: new dependent option (priority 0x1)
Jun 6 17:25:19 upstairs kernel: pnp 00:06: io min 0x278 max 0x278 align 1 size 8 flags 0x1
Jun 6 17:25:19 upstairs kernel: pnp 00:06: io min 0x678 max 0x678 align 1 size 4 flags 0x1
Jun 6 17:25:19 upstairs kernel: pnp 00:06: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001cf8 flags 0x1
Jun 6 17:25:19 upstairs kernel: pnp 00:06: dma bitmask 0xb flags 0x0
Jun 6 17:25:19 upstairs kernel: pnp 00:06: new dependent option (priority 0x1)
Jun 6 17:25:19 upstairs kernel: pnp 00:06: io min 0x3bc max 0x3bc align 1 size 4 flags 0x1
Jun 6 17:25:19 upstairs kernel: pnp 00:06: io min 0x7bc max 0x7bc align 1 size 4 flags 0x1
Jun 6 17:25:19 upstairs kernel: pnp 00:06: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001cf8 flags 0x1
Jun 6 17:25:19 upstairs kernel: pnp 00:06: dma bitmask 0xb flags 0x0
Jun 6 17:25:19 upstairs kernel: pnp 00:06: end dependent options
Jun 6 17:25:19 upstairs kernel: pnp 00:06: Plug and Play ACPI device, IDs PNP0401 (active)
Jun 6 17:25:19 upstairs kernel: pnp 00:07: parse allocated resources
Jun 6 17:25:19 upstairs kernel: pnp 00:07: add io 0x0-0xffffffff flags 0x10000001
Jun 6 17:25:19 upstairs kernel: pnp 00:07: add io 0x0-0xffffffff flags 0x10000001
Jun 6 17:25:19 upstairs kernel: pnp 00:07: add io 0x290-0x297 flags 0x1
Jun 6 17:25:19 upstairs kernel: pnp 00:07: PNP0c02: calling quirk_system_pci_resources+0x0/0x1c1
Jun 6 17:25:19 upstairs kernel: pnp 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
Jun 6 17:25:19 upstairs kernel: pnp 00:08: parse allocated resources
Jun 6 17:25:19 upstairs kernel: pnp 00:08: add io 0x10-0x1f flags 0x1
Jun 6 17:25:19 upstairs kernel: pnp 00:08: add io 0x22-0x3f flags 0x1
Jun 6 17:25:19 upstairs kernel: pnp 00:08: add io 0x44-0x5f flags 0x1
Jun 6 17:25:19 upstairs kernel: pnp 00:08: add io 0x62-0x63 flags 0x1
Jun 6 17:25:19 upstairs kernel: pnp 00:08: add io 0x65-0x6f flags 0x1
Jun 6 17:25:19 upstairs kernel: pnp 00:08: add io 0x72-0x7f flags 0x1
Jun 6 17:25:19 upstairs kernel: pnp 00:08: add io 0x80-0x80 flags 0x1
Jun 6 17:25:19 upstairs kernel: pnp 00:08: add io 0x84-0x86 flags 0x1
Jun 6 17:25:19 upstairs kernel: pnp 00:08: add io 0x88-0x88 flags 0x1
Jun 6 17:25:19 upstairs kernel: pnp 00:08: add io 0x8c-0x8e flags 0x1
Jun 6 17:25:19 upstairs kernel: pnp 00:08: add io 0x90-0x9f flags 0x1
Jun 6 17:25:19 upstairs kernel: pnp 00:08: add io 0xa2-0xbf flags 0x1
Jun 6 17:25:19 upstairs kernel: pnp 00:08: add io 0xe0-0xef flags 0x1
Jun 6 17:25:19 upstairs kernel: pnp 00:08: add io 0x4d0-0x4d1 flags 0x1
Jun 6 17:25:19 upstairs kernel: pnp 00:08: add io 0x800-0x87f flags 0x1
Jun 6 17:25:19 upstairs kernel: pnp 00:08: add io 0x400-0x41f flags 0x1
Jun 6 17:25:19 upstairs kernel: pnp 00:08: add io 0x480-0x4bf flags 0x1
Jun 6 17:25:19 upstairs kernel: pnp 00:08: add mem 0xfed20000-0xfed8ffff flags 0x1
Jun 6 17:25:19 upstairs kernel: pnp 00:08: add mem 0xffb00000-0xffbfffff flags 0x1
Jun 6 17:25:19 upstairs kernel: pnp 00:08: PNP0c02: calling quirk_system_pci_resources+0x0/0x1c1
Jun 6 17:25:19 upstairs kernel: pnp 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
Jun 6 17:25:19 upstairs kernel: pnp 00:09: parse allocated resources
Jun 6 17:25:19 upstairs kernel: pnp 00:09: add mem 0xfec00000-0xfec00fff flags 0x0
Jun 6 17:25:19 upstairs kernel: pnp 00:09: add mem 0xfee00000-0xfee00fff flags 0x0
Jun 6 17:25:19 upstairs kernel: pnp 00:09: PNP0c02: calling quirk_system_pci_resources+0x0/0x1c1
Jun 6 17:25:19 upstairs kernel: pnp 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
Jun 6 17:25:19 upstairs kernel: pnp 00:0a: parse allocated resources
Jun 6 17:25:19 upstairs kernel: pnp 00:0a: add io 0x60-0x60 flags 0x1
Jun 6 17:25:19 upstairs kernel: pnp 00:0a: add io 0x64-0x64 flags 0x1
Jun 6 17:25:19 upstairs kernel: pnp 00:0a: add irq 1 flags 0x1
Jun 6 17:25:19 upstairs kernel: pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
Jun 6 17:25:19 upstairs kernel: pnp 00:0b: parse allocated resources
Jun 6 17:25:19 upstairs kernel: pnp 00:0b: add io 0x3f8-0x3ff flags 0x1
Jun 6 17:25:19 upstairs kernel: pnp 00:0b: add irq 4 flags 0x1
Jun 6 17:25:19 upstairs kernel: pnp 00:0b: parse resource options
Jun 6 17:25:19 upstairs kernel: pnp 00:0b: new independent option
Jun 6 17:25:19 upstairs kernel: pnp 00:0b: new dependent option (priority 0x0)
Jun 6 17:25:19 upstairs kernel: pnp 00:0b: io min 0x3f8 max 0x3f8 align 4 size 8 flags 0x1
Jun 6 17:25:19 upstairs kernel: pnp 00:0b: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000010 flags 0x1
Jun 6 17:25:19 upstairs kernel: pnp 00:0b: new dependent option (priority 0x1)
Jun 6 17:25:19 upstairs kernel: pnp 00:0b: io min 0x3f8 max 0x3f8 align 1 size 8 flags 0x1
Jun 6 17:25:19 upstairs kernel: pnp 00:0b: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001cf8 flags 0x1
Jun 6 17:25:19 upstairs kernel: pnp 00:0b: new dependent option (priority 0x1)
Jun 6 17:25:19 upstairs kernel: pnp 00:0b: io min 0x2f8 max 0x2f8 align 1 size 8 flags 0x1
Jun 6 17:25:19 upstairs kernel: pnp 00:0b: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001cf8 flags 0x1
Jun 6 17:25:19 upstairs kernel: pnp 00:0b: new dependent option (priority 0x1)
Jun 6 17:25:19 upstairs kernel: pnp 00:0b: io min 0x3e8 max 0x3e8 align 1 size 8 flags 0x1
Jun 6 17:25:19 upstairs kernel: pnp 00:0b: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001cf8 flags 0x1
Jun 6 17:25:19 upstairs kernel: pnp 00:0b: new dependent option (priority 0x1)
Jun 6 17:25:19 upstairs kernel: pnp 00:0b: io min 0x2e8 max 0x2e8 align 1 size 8 flags 0x1
Jun 6 17:25:19 upstairs kernel: pnp 00:0b: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001cf8 flags 0x1
Jun 6 17:25:19 upstairs kernel: pnp 00:0b: end dependent options
Jun 6 17:25:19 upstairs kernel: pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
Jun 6 17:25:19 upstairs kernel: pnp 00:0c: parse allocated resources
Jun 6 17:25:19 upstairs kernel: pnp 00:0c: add mem 0x0-0x9ffff flags 0x1
Jun 6 17:25:19 upstairs kernel: pnp 00:0c: add mem 0xc0000-0xdffff flags 0x0
Jun 6 17:25:19 upstairs kernel: pnp 00:0c: add mem 0xe0000-0xfffff flags 0x0
Jun 6 17:25:19 upstairs kernel: pnp 00:0c: add mem 0x100000-0x7ffeffff flags 0x1
Jun 6 17:25:19 upstairs kernel: pnp 00:0c: add mem 0xfff00000-0xffffffff flags 0x0
Jun 6 17:25:19 upstairs kernel: pnp 00:0c: PNP0c01: calling quirk_system_pci_resources+0x0/0x1c1
Jun 6 17:25:19 upstairs kernel: pnp 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
Jun 6 17:25:19 upstairs kernel: pnp: PnP ACPI: found 13 devices
Jun 6 17:25:19 upstairs kernel: ACPI: ACPI bus type pnp unregistered
Jun 6 17:25:19 upstairs kernel: SCSI subsystem initialized
Jun 6 17:25:19 upstairs kernel: libata version 3.00 loaded.
Jun 6 17:25:19 upstairs kernel: usbcore: registered new interface driver usbfs
Jun 6 17:25:19 upstairs kernel: usbcore: registered new interface driver hub
Jun 6 17:25:19 upstairs kernel: usbcore: registered new device driver usb
Jun 6 17:25:19 upstairs kernel: PCI: Using ACPI for IRQ routing
Jun 6 17:25:19 upstairs kernel: pnp: the driver 'system' has been registered
Jun 6 17:25:19 upstairs kernel: system 00:07: ioport range 0x290-0x297 has been reserved
Jun 6 17:25:19 upstairs kernel: system 00:07: iomem range 0x0-0x0 could not be reserved
Jun 6 17:25:19 upstairs last message repeated 23 times
Jun 6 17:25:19 upstairs kernel: system 00:07: driver attached
Jun 6 17:25:19 upstairs kernel: system 00:08: ioport range 0x4d0-0x4d1 has been reserved
Jun 6 17:25:19 upstairs kernel: system 00:08: ioport range 0x800-0x87f has been reserved
Jun 6 17:25:19 upstairs kernel: system 00:08: ioport range 0x400-0x41f has been reserved
Jun 6 17:25:19 upstairs kernel: system 00:08: ioport range 0x480-0x4bf has been reserved
Jun 6 17:25:19 upstairs kernel: system 00:08: iomem range 0xfed20000-0xfed8ffff has been reserved
Jun 6 17:25:19 upstairs kernel: system 00:08: iomem range 0xffb00000-0xffbfffff could not be reserved
Jun 6 17:25:19 upstairs kernel: system 00:08: iomem range 0x0-0x0 could not be reserved
Jun 6 17:25:19 upstairs last message repeated 21 times
Jun 6 17:25:19 upstairs kernel: system 00:08: driver attached
Jun 6 17:25:19 upstairs kernel: system 00:09: iomem range 0xfec00000-0xfec00fff has been reserved
Jun 6 17:25:19 upstairs kernel: system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
Jun 6 17:25:19 upstairs kernel: system 00:09: iomem range 0x0-0x0 could not be reserved
Jun 6 17:25:19 upstairs last message repeated 21 times
Jun 6 17:25:19 upstairs kernel: system 00:09: driver attached
Jun 6 17:25:19 upstairs kernel: system 00:0c: iomem range 0x0-0x9ffff could not be reserved
Jun 6 17:25:19 upstairs kernel: system 00:0c: iomem range 0xc0000-0xdffff could not be reserved
Jun 6 17:25:19 upstairs kernel: system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
Jun 6 17:25:19 upstairs kernel: system 00:0c: iomem range 0x100000-0x7ffeffff could not be reserved
Jun 6 17:25:19 upstairs kernel: system 00:0c: iomem range 0xfff00000-0xffffffff could not be reserved
Jun 6 17:25:19 upstairs kernel: system 00:0c: iomem range 0x0-0x0 could not be reserved
Jun 6 17:25:19 upstairs last message repeated 18 times
Jun 6 17:25:19 upstairs kernel: system 00:0c: driver attached
Jun 6 17:25:19 upstairs kernel: PCI: Bridge: 0000:00:01.0
Jun 6 17:25:19 upstairs kernel: IO window: c000-cfff
Jun 6 17:25:19 upstairs kernel: MEM window: 0xfa000000-0xfbefffff
Jun 6 17:25:19 upstairs kernel: PREFETCH window: 0x00000000f0000000-0x00000000f8ffffff
Jun 6 17:25:19 upstairs kernel: PCI: Bridge: 0000:00:1e.0
Jun 6 17:25:19 upstairs kernel: IO window: d000-efff
Jun 6 17:25:19 upstairs kernel: MEM window: 0xfbf00000-0xfbffffff
Jun 6 17:25:19 upstairs kernel: PREFETCH window: disabled.
Jun 6 17:25:19 upstairs kernel: PCI: Setting latency timer of device 0000:00:1e.0 to 64
Jun 6 17:25:19 upstairs kernel: NET: Registered protocol family 2
Jun 6 17:25:19 upstairs kernel: IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Jun 6 17:25:19 upstairs kernel: TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Jun 6 17:25:19 upstairs kernel: TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
Jun 6 17:25:19 upstairs kernel: TCP: Hash tables configured (established 131072 bind 65536)
Jun 6 17:25:19 upstairs kernel: TCP reno registered
Jun 6 17:25:19 upstairs kernel: NET: Registered protocol family 1
Jun 6 17:25:19 upstairs kernel: highmem bounce pool size: 64 pages
Jun 6 17:25:19 upstairs kernel: msgmni has been set to 1750 for ipc namespace c03dea00
Jun 6 17:25:19 upstairs kernel: io scheduler noop registered
Jun 6 17:25:19 upstairs kernel: io scheduler cfq registered (default)
Jun 6 17:25:19 upstairs kernel: pci 0000:01:00.0: Boot video device
Jun 6 17:25:19 upstairs kernel: input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
Jun 6 17:25:19 upstairs kernel: ACPI: Power Button (FF) [PWRF]
Jun 6 17:25:19 upstairs kernel: input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
Jun 6 17:25:19 upstairs kernel: ACPI: Power Button (CM) [PWRB]
Jun 6 17:25:19 upstairs kernel: ACPI: ACPI0007:00 is registered as cooling_device0
Jun 6 17:25:19 upstairs kernel: ACPI: Processor [CPU1] (supports 8 throttling states)
Jun 6 17:25:19 upstairs kernel: ACPI: ACPI0007:01 is registered as cooling_device1
Jun 6 17:25:19 upstairs kernel: Real Time Clock Driver v1.12ac
Jun 6 17:25:19 upstairs kernel: Linux agpgart interface v0.103
Jun 6 17:25:19 upstairs kernel: agpgart: Detected an Intel 865 Chipset.
Jun 6 17:25:19 upstairs kernel: agpgart: AGP aperture is 64M @ 0xec000000
Jun 6 17:25:19 upstairs kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
Jun 6 17:25:19 upstairs kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Jun 6 17:25:19 upstairs kernel: pnp: the driver 'serial' has been registered
Jun 6 17:25:19 upstairs kernel: 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Jun 6 17:25:19 upstairs kernel: serial 00:0b: driver attached
Jun 6 17:25:19 upstairs kernel: 8139too Fast Ethernet driver 0.9.28
Jun 6 17:25:19 upstairs kernel: ACPI: PCI Interrupt 0000:02:0d.0[A] -> GSI 23 (level, low) -> IRQ 23
Jun 6 17:25:19 upstairs kernel: eth0: RealTek RTL8139 at 0xf8816c00, 00:17:31:a9:1d:48, IRQ 23
Jun 6 17:25:19 upstairs kernel: eth0: Identified 8139 chip type 'RTL-8100B/8139D'
Jun 6 17:25:19 upstairs kernel: Driver 'sd' needs updating - please use bus_type methods
Jun 6 17:25:19 upstairs kernel: Driver 'sr' needs updating - please use bus_type methods
Jun 6 17:25:19 upstairs kernel: ata_piix 0000:00:1f.1: version 2.12
Jun 6 17:25:19 upstairs kernel: ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
Jun 6 17:25:19 upstairs kernel: ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
Jun 6 17:25:19 upstairs kernel: PCI: Setting latency timer of device 0000:00:1f.1 to 64
Jun 6 17:25:19 upstairs kernel: scsi0 : ata_piix
Jun 6 17:25:19 upstairs kernel: scsi1 : ata_piix
Jun 6 17:25:19 upstairs kernel: ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
Jun 6 17:25:19 upstairs kernel: ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
Jun 6 17:25:19 upstairs kernel: ata1.00: ATA-7: MAXTOR STM3250820A, 3.AAE, max UDMA/100
Jun 6 17:25:19 upstairs kernel: ata1.00: 488397168 sectors, multi 16: LBA48
Jun 6 17:25:19 upstairs kernel: ata1.01: ATA-7: Maxtor 6L160P0, BAJ41G20, max UDMA/133
Jun 6 17:25:19 upstairs kernel: ata1.01: 320173056 sectors, multi 16: LBA48
Jun 6 17:25:19 upstairs kernel: ata1.00: configured for UDMA/100
Jun 6 17:25:19 upstairs kernel: ata1.01: configured for UDMA/100
Jun 6 17:25:19 upstairs kernel: Switched to NOHz mode on CPU #1
Jun 6 17:25:19 upstairs kernel: Switched to NOHz mode on CPU #0
Jun 6 17:25:19 upstairs kernel: ata2.00: ATAPI: SONY DVD RW DW-G120A, MYS2, max UDMA/66
Jun 6 17:25:19 upstairs kernel: ata2.01: ATAPI: PHILIPS DVDR1628P1, Q2.2, max UDMA/33
Jun 6 17:25:19 upstairs kernel: ata2.00: configured for UDMA/66
Jun 6 17:25:19 upstairs kernel: ata2.01: configured for UDMA/33
Jun 6 17:25:19 upstairs kernel: scsi 0:0:0:0: Direct-Access ATA MAXTOR STM325082 3.AA PQ: 0 ANSI: 5
Jun 6 17:25:19 upstairs kernel: sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
Jun 6 17:25:19 upstairs kernel: sd 0:0:0:0: [sda] Write Protect is off
Jun 6 17:25:19 upstairs kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Jun 6 17:25:19 upstairs kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jun 6 17:25:19 upstairs kernel: sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
Jun 6 17:25:19 upstairs kernel: sd 0:0:0:0: [sda] Write Protect is off
Jun 6 17:25:19 upstairs kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Jun 6 17:25:19 upstairs kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jun 6 17:25:19 upstairs kernel: sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
Jun 6 17:25:19 upstairs kernel: sd 0:0:0:0: [sda] Attached SCSI disk
Jun 6 17:25:19 upstairs kernel: scsi 0:0:1:0: Direct-Access ATA Maxtor 6L160P0 BAJ4 PQ: 0 ANSI: 5
Jun 6 17:25:19 upstairs kernel: sd 0:0:1:0: [sdb] 320173056 512-byte hardware sectors (163929 MB)
Jun 6 17:25:19 upstairs kernel: sd 0:0:1:0: [sdb] Write Protect is off
Jun 6 17:25:19 upstairs kernel: sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
Jun 6 17:25:19 upstairs kernel: sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jun 6 17:25:19 upstairs kernel: sd 0:0:1:0: [sdb] 320173056 512-byte hardware sectors (163929 MB)
Jun 6 17:25:19 upstairs kernel: sd 0:0:1:0: [sdb] Write Protect is off
Jun 6 17:25:19 upstairs kernel: sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
Jun 6 17:25:19 upstairs kernel: sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jun 6 17:25:19 upstairs kernel: sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 sdb7 sdb8 >
Jun 6 17:25:19 upstairs kernel: sdb2: <bsd: sdb9 sdb10 sdb11 sdb12 sdb13 >
Jun 6 17:25:19 upstairs kernel: sd 0:0:1:0: [sdb] Attached SCSI disk
Jun 6 17:25:19 upstairs kernel: scsi 1:0:0:0: CD-ROM SONY DVD RW DW-G120A MYS2 PQ: 0 ANSI: 5
Jun 6 17:25:19 upstairs kernel: sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Jun 6 17:25:19 upstairs kernel: Uniform CD-ROM driver Revision: 3.20
Jun 6 17:25:19 upstairs kernel: sr 1:0:0:0: Attached scsi CD-ROM sr0
Jun 6 17:25:19 upstairs kernel: scsi 1:0:1:0: CD-ROM PHILIPS DVDR1628P1 Q2.2 PQ: 0 ANSI: 5
Jun 6 17:25:19 upstairs kernel: sr1: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
Jun 6 17:25:19 upstairs kernel: sr 1:0:1:0: Attached scsi CD-ROM sr1
Jun 6 17:25:19 upstairs kernel: ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 18
Jun 6 17:25:19 upstairs kernel: ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
Jun 6 17:25:19 upstairs kernel: PCI: Setting latency timer of device 0000:00:1f.2 to 64
Jun 6 17:25:19 upstairs kernel: scsi2 : ata_piix
Jun 6 17:25:19 upstairs kernel: scsi3 : ata_piix
Jun 6 17:25:19 upstairs kernel: ata3: SATA max UDMA/133 cmd 0x9800 ctl 0x9400 bmdma 0x8400 irq 18
Jun 6 17:25:19 upstairs kernel: ata4: SATA max UDMA/133 cmd 0x9000 ctl 0x8800 bmdma 0x8408 irq 18
Jun 6 17:25:19 upstairs kernel: ata3.00: ATA-7: Hitachi HDS721616PLA380, P22OA70A, max UDMA/133
Jun 6 17:25:19 upstairs kernel: ata3.00: 321672960 sectors, multi 16: LBA48 NCQ (depth 0/32)
Jun 6 17:25:19 upstairs kernel: ata3.00: configured for UDMA/133
Jun 6 17:25:19 upstairs kernel: scsi 2:0:0:0: Direct-Access ATA Hitachi HDS72161 P22O PQ: 0 ANSI: 5
Jun 6 17:25:19 upstairs kernel: sd 2:0:0:0: [sdc] 321672960 512-byte hardware sectors (164697 MB)
Jun 6 17:25:19 upstairs kernel: sd 2:0:0:0: [sdc] Write Protect is off
Jun 6 17:25:19 upstairs kernel: sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
Jun 6 17:25:19 upstairs kernel: sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jun 6 17:25:19 upstairs kernel: sd 2:0:0:0: [sdc] 321672960 512-byte hardware sectors (164697 MB)
Jun 6 17:25:19 upstairs kernel: sd 2:0:0:0: [sdc] Write Protect is off
Jun 6 17:25:19 upstairs kernel: sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
Jun 6 17:25:19 upstairs kernel: sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jun 6 17:25:19 upstairs kernel: sdc: sdc1 sdc2
Jun 6 17:25:19 upstairs kernel: sd 2:0:0:0: [sdc] Attached SCSI disk
Jun 6 17:25:19 upstairs kernel: pnp: the driver 'i8042 kbd' has been registered
Jun 6 17:25:19 upstairs kernel: i8042 kbd 00:0a: driver attached
Jun 6 17:25:19 upstairs kernel: pnp: the driver 'i8042 aux' has been registered
Jun 6 17:25:19 upstairs kernel: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
Jun 6 17:25:19 upstairs kernel: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
Jun 6 17:25:19 upstairs kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Jun 6 17:25:19 upstairs kernel: mice: PS/2 mouse device common for all mice
Jun 6 17:25:19 upstairs kernel: Advanced Linux Sound Architecture Driver Version 1.0.16.
Jun 6 17:25:19 upstairs kernel: ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 17
Jun 6 17:25:19 upstairs kernel: PCI: Setting latency timer of device 0000:00:1f.5 to 64
Jun 6 17:25:19 upstairs kernel: intel8x0_measure_ac97_clock: measured 50838 usecs
Jun 6 17:25:19 upstairs kernel: intel8x0: clocking to 48000
Jun 6 17:25:19 upstairs kernel: ALSA device list:
Jun 6 17:25:19 upstairs kernel: #0: Intel ICH5 with ALC655 at irq 17
Jun 6 17:25:19 upstairs kernel: TCP cubic registered
Jun 6 17:25:19 upstairs kernel: NET: Registered protocol family 15
Jun 6 17:25:19 upstairs kernel: p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
Jun 6 17:25:19 upstairs kernel: Starting balanced_irq
Jun 6 17:25:19 upstairs kernel: Using IPI No-Shortcut mode
Jun 6 17:25:19 upstairs kernel: kjournald starting. Commit interval 5 seconds
Jun 6 17:25:19 upstairs kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jun 6 17:25:19 upstairs kernel: VFS: Mounted root (ext3 filesystem) readonly.
Jun 6 17:25:19 upstairs kernel: Freeing unused kernel memory: 200k freed
Jun 6 17:25:19 upstairs kernel: EXT3 FS on sdc1, internal journal
Jun 6 17:25:19 upstairs kernel: USB Universal Host Controller Interface driver v3.0
Jun 6 17:25:19 upstairs kernel: ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
Jun 6 17:25:19 upstairs kernel: PCI: Setting latency timer of device 0000:00:1d.0 to 64
Jun 6 17:25:19 upstairs kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller
Jun 6 17:25:19 upstairs kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
Jun 6 17:25:19 upstairs kernel: uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000a800
Jun 6 17:25:19 upstairs kernel: usb usb1: configuration #1 chosen from 1 choice
Jun 6 17:25:19 upstairs kernel: hub 1-0:1.0: USB hub found
Jun 6 17:25:19 upstairs kernel: hub 1-0:1.0: 2 ports detected
Jun 6 17:25:44 upstairs kernel: ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
Jun 6 17:25:44 upstairs kernel: usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
Jun 6 17:25:44 upstairs kernel: usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jun 6 17:25:44 upstairs kernel: usb usb1: Product: UHCI Host Controller
Jun 6 17:25:44 upstairs kernel: usb usb1: Manufacturer: Linux 2.6.26-rc5 uhci_hcd
Jun 6 17:25:44 upstairs kernel: usb usb1: SerialNumber: 0000:00:1d.0
Jun 6 17:25:44 upstairs kernel: ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
Jun 6 17:25:44 upstairs kernel: PCI: Setting latency timer of device 0000:00:1d.1 to 64
Jun 6 17:25:44 upstairs kernel: uhci_hcd 0000:00:1d.1: UHCI Host Controller
Jun 6 17:25:44 upstairs kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
Jun 6 17:25:44 upstairs kernel: uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b000
Jun 6 17:25:44 upstairs kernel: usb usb2: configuration #1 chosen from 1 choice
Jun 6 17:25:44 upstairs kernel: hub 2-0:1.0: USB hub found
Jun 6 17:25:44 upstairs kernel: hub 2-0:1.0: 2 ports detected
Jun 6 17:25:44 upstairs kernel: pnp: the driver 'parport_pc' has been registered
Jun 6 17:25:44 upstairs kernel: parport_pc 00:06: reported by Plug and Play ACPI
Jun 6 17:25:44 upstairs kernel: parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP(,...)]
Jun 6 17:25:44 upstairs kernel: parport_pc 00:06: driver attached
Jun 6 17:25:44 upstairs kernel: usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
Jun 6 17:25:44 upstairs kernel: usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jun 6 17:25:44 upstairs kernel: usb usb2: Product: UHCI Host Controller
Jun 6 17:25:44 upstairs kernel: usb usb2: Manufacturer: Linux 2.6.26-rc5 uhci_hcd
Jun 6 17:25:44 upstairs kernel: usb usb2: SerialNumber: 0000:00:1d.1
Jun 6 17:25:44 upstairs kernel: ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
Jun 6 17:25:44 upstairs kernel: PCI: Setting latency timer of device 0000:00:1d.2 to 64
Jun 6 17:25:44 upstairs kernel: uhci_hcd 0000:00:1d.2: UHCI Host Controller
Jun 6 17:25:44 upstairs kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
Jun 6 17:25:44 upstairs kernel: uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b400
Jun 6 17:25:44 upstairs kernel: usb usb3: configuration #1 chosen from 1 choice
Jun 6 17:25:44 upstairs kernel: hub 3-0:1.0: USB hub found
Jun 6 17:25:44 upstairs kernel: hub 3-0:1.0: 2 ports detected
Jun 6 17:25:44 upstairs kernel: usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
Jun 6 17:25:44 upstairs kernel: usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jun 6 17:25:44 upstairs kernel: usb usb3: Product: UHCI Host Controller
Jun 6 17:25:44 upstairs kernel: usb usb3: Manufacturer: Linux 2.6.26-rc5 uhci_hcd
Jun 6 17:25:44 upstairs kernel: usb usb3: SerialNumber: 0000:00:1d.2
Jun 6 17:25:44 upstairs kernel: ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 16
Jun 6 17:25:44 upstairs kernel: PCI: Setting latency timer of device 0000:00:1d.3 to 64
Jun 6 17:25:44 upstairs kernel: uhci_hcd 0000:00:1d.3: UHCI Host Controller
Jun 6 17:25:44 upstairs kernel: uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
Jun 6 17:25:44 upstairs kernel: uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000b800
Jun 6 17:25:44 upstairs kernel: usb usb4: configuration #1 chosen from 1 choice
Jun 6 17:25:44 upstairs kernel: hub 4-0:1.0: USB hub found
Jun 6 17:25:44 upstairs kernel: hub 4-0:1.0: 2 ports detected
Jun 6 17:25:44 upstairs kernel: usb 1-2: new full speed USB device using uhci_hcd and address 2
Jun 6 17:25:44 upstairs kernel: usb 1-2: configuration #1 chosen from 1 choice
Jun 6 17:25:44 upstairs kernel: usb 1-2: New USB device found, idVendor=06bd, idProduct=2061
Jun 6 17:25:44 upstairs kernel: usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Jun 6 17:25:44 upstairs kernel: usb 1-2: Product: SNAPSCAN
Jun 6 17:25:44 upstairs kernel: usb 1-2: Manufacturer: AGFA
Jun 6 17:25:44 upstairs kernel: usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
Jun 6 17:25:44 upstairs kernel: usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jun 6 17:25:44 upstairs kernel: usb usb4: Product: UHCI Host Controller
Jun 6 17:25:44 upstairs kernel: usb usb4: Manufacturer: Linux 2.6.26-rc5 uhci_hcd
Jun 6 17:25:44 upstairs kernel: usb usb4: SerialNumber: 0000:00:1d.3
Jun 6 17:25:44 upstairs kernel: ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23
Jun 6 17:25:44 upstairs kernel: PCI: Setting latency timer of device 0000:00:1d.7 to 64
Jun 6 17:25:44 upstairs kernel: ehci_hcd 0000:00:1d.7: EHCI Host Controller
Jun 6 17:25:44 upstairs kernel: ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
Jun 6 17:25:44 upstairs kernel: ehci_hcd 0000:00:1d.7: debug port 1
Jun 6 17:25:44 upstairs kernel: PCI: cache line size of 128 is not supported by device 0000:00:1d.7
Jun 6 17:25:44 upstairs kernel: ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9fffc00
Jun 6 17:25:44 upstairs kernel: ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Jun 6 17:25:44 upstairs kernel: usb usb5: configuration #1 chosen from 1 choice
Jun 6 17:25:44 upstairs kernel: hub 5-0:1.0: USB hub found
Jun 6 17:25:44 upstairs kernel: hub 5-0:1.0: 8 ports detected
Jun 6 17:25:44 upstairs kernel: usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
Jun 6 17:25:44 upstairs kernel: usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jun 6 17:25:44 upstairs kernel: usb usb5: Product: EHCI Host Controller
Jun 6 17:25:44 upstairs kernel: usb usb5: Manufacturer: Linux 2.6.26-rc5 ehci_hcd
Jun 6 17:25:44 upstairs kernel: usb usb5: SerialNumber: 0000:00:1d.7
Jun 6 17:25:44 upstairs kernel: ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 17 (level, low) -> IRQ 17
Jun 6 17:25:44 upstairs kernel: uhci_hcd 0000:02:09.0: UHCI Host Controller
Jun 6 17:25:44 upstairs kernel: uhci_hcd 0000:02:09.0: new USB bus registered, assigned bus number 6
Jun 6 17:25:44 upstairs kernel: uhci_hcd 0000:02:09.0: irq 17, io base 0x0000e400
Jun 6 17:25:44 upstairs kernel: usb usb6: configuration #1 chosen from 1 choice
Jun 6 17:25:44 upstairs kernel: hub 6-0:1.0: USB hub found
Jun 6 17:25:44 upstairs kernel: hub 6-0:1.0: 2 ports detected
Jun 6 17:25:44 upstairs kernel: usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
Jun 6 17:25:44 upstairs kernel: usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jun 6 17:25:44 upstairs kernel: usb usb6: Product: UHCI Host Controller
Jun 6 17:25:44 upstairs kernel: usb usb6: Manufacturer: Linux 2.6.26-rc5 uhci_hcd
Jun 6 17:25:44 upstairs kernel: usb usb6: SerialNumber: 0000:02:09.0
Jun 6 17:25:44 upstairs kernel: ACPI: PCI Interrupt 0000:02:09.1[B] -> GSI 18 (level, low) -> IRQ 18
Jun 6 17:25:44 upstairs kernel: uhci_hcd 0000:02:09.1: UHCI Host Controller
Jun 6 17:25:44 upstairs kernel: uhci_hcd 0000:02:09.1: new USB bus registered, assigned bus number 7
Jun 6 17:25:44 upstairs kernel: uhci_hcd 0000:02:09.1: irq 18, io base 0x0000e800
Jun 6 17:25:44 upstairs kernel: usb usb7: configuration #1 chosen from 1 choice
Jun 6 17:25:44 upstairs kernel: hub 7-0:1.0: USB hub found
Jun 6 17:25:44 upstairs kernel: hub 7-0:1.0: 2 ports detected
Jun 6 17:25:44 upstairs kernel: usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
Jun 6 17:25:44 upstairs kernel: usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jun 6 17:25:44 upstairs kernel: usb usb7: Product: UHCI Host Controller
Jun 6 17:25:44 upstairs kernel: usb usb7: Manufacturer: Linux 2.6.26-rc5 uhci_hcd
Jun 6 17:25:44 upstairs kernel: usb usb7: SerialNumber: 0000:02:09.1
Jun 6 17:25:44 upstairs kernel: ACPI: PCI Interrupt 0000:02:09.2[C] -> GSI 19 (level, low) -> IRQ 19
Jun 6 17:25:44 upstairs kernel: ehci_hcd 0000:02:09.2: EHCI Host Controller
Jun 6 17:25:44 upstairs kernel: ehci_hcd 0000:02:09.2: new USB bus registered, assigned bus number 8
Jun 6 17:25:44 upstairs kernel: ehci_hcd 0000:02:09.2: irq 19, io mem 0xfbfffc00
Jun 6 17:25:44 upstairs kernel: ehci_hcd 0000:02:09.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Jun 6 17:25:44 upstairs kernel: usb usb8: configuration #1 chosen from 1 choice
Jun 6 17:25:44 upstairs kernel: hub 8-0:1.0: USB hub found
Jun 6 17:25:44 upstairs kernel: hub 8-0:1.0: 4 ports detected
Jun 6 17:25:44 upstairs kernel: usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
Jun 6 17:25:44 upstairs kernel: usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jun 6 17:25:44 upstairs kernel: usb usb8: Product: EHCI Host Controller
Jun 6 17:25:44 upstairs kernel: usb usb8: Manufacturer: Linux 2.6.26-rc5 ehci_hcd
Jun 6 17:25:44 upstairs kernel: usb usb8: SerialNumber: 0000:02:09.2
Jun 6 17:25:44 upstairs kernel: ACPI: PCI Interrupt 0000:02:0a.0[A] -> GSI 21 (level, low) -> IRQ 21
Jun 6 17:25:44 upstairs kernel: ohci_hcd 0000:02:0a.0: OHCI Host Controller
Jun 6 17:25:44 upstairs kernel: ohci_hcd 0000:02:0a.0: new USB bus registered, assigned bus number 9
Jun 6 17:25:44 upstairs kernel: ohci_hcd 0000:02:0a.0: irq 21, io mem 0xfbffd000
Jun 6 17:25:44 upstairs kernel: usb 1-2: USB disconnect, address 2
Jun 6 17:25:44 upstairs kernel: usb usb9: configuration #1 chosen from 1 choice
Jun 6 17:25:44 upstairs kernel: hub 9-0:1.0: USB hub found
Jun 6 17:25:44 upstairs kernel: hub 9-0:1.0: 3 ports detected
Jun 6 17:25:44 upstairs kernel: usb 1-2: new full speed USB device using uhci_hcd and address 3
Jun 6 17:25:44 upstairs kernel: usb 1-2: configuration #1 chosen from 1 choice
Jun 6 17:25:44 upstairs kernel: usb 1-2: New USB device found, idVendor=06bd, idProduct=2061
Jun 6 17:25:44 upstairs kernel: usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Jun 6 17:25:44 upstairs kernel: usb 1-2: Product: SNAPSCAN
Jun 6 17:25:44 upstairs kernel: usb 1-2: Manufacturer: AGFA
Jun 6 17:25:44 upstairs kernel: usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
Jun 6 17:25:44 upstairs kernel: usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jun 6 17:25:44 upstairs kernel: usb usb9: Product: OHCI Host Controller
Jun 6 17:25:44 upstairs kernel: usb usb9: Manufacturer: Linux 2.6.26-rc5 ohci_hcd
Jun 6 17:25:44 upstairs kernel: usb usb9: SerialNumber: 0000:02:0a.0
Jun 6 17:25:44 upstairs kernel: ACPI: PCI Interrupt 0000:02:0a.1[B] -> GSI 22 (level, low) -> IRQ 22
Jun 6 17:25:44 upstairs kernel: ohci_hcd 0000:02:0a.1: OHCI Host Controller
Jun 6 17:25:44 upstairs kernel: ohci_hcd 0000:02:0a.1: new USB bus registered, assigned bus number 10
Jun 6 17:25:44 upstairs kernel: ohci_hcd 0000:02:0a.1: irq 22, io mem 0xfbffe000
Jun 6 17:25:44 upstairs kernel: usb 8-1: new high speed USB device using ehci_hcd and address 2
Jun 6 17:25:44 upstairs kernel: usb 8-1: configuration #1 chosen from 1 choice
Jun 6 17:25:44 upstairs kernel: usb 8-1: New USB device found, idVendor=2040, idProduct=9950
Jun 6 17:25:44 upstairs kernel: usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Jun 6 17:25:44 upstairs kernel: usb 8-1: Product: WinTV Nova-DT
Jun 6 17:25:44 upstairs kernel: usb 8-1: Manufacturer: Hauppauge
Jun 6 17:25:44 upstairs kernel: usb 8-1: SerialNumber: 4030248054
Jun 6 17:25:44 upstairs kernel: usb 2-1: new full speed USB device using uhci_hcd and address 2
Jun 6 17:25:44 upstairs kernel: usb 2-1: configuration #1 chosen from 1 choice
Jun 6 17:25:44 upstairs kernel: usb 2-1: New USB device found, idVendor=04b8, idProduct=0005
Jun 6 17:25:44 upstairs kernel: usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Jun 6 17:25:44 upstairs kernel: usb 2-1: Product: USB Printer
Jun 6 17:25:44 upstairs kernel: usb 2-1: Manufacturer: EPSON
Jun 6 17:25:44 upstairs kernel: usb 2-1: SerialNumber: L80020307150840450
Jun 6 17:25:44 upstairs kernel: usb usb10: configuration #1 chosen from 1 choice
Jun 6 17:25:44 upstairs kernel: hub 10-0:1.0: USB hub found
Jun 6 17:25:44 upstairs kernel: hub 10-0:1.0: 2 ports detected
Jun 6 17:25:44 upstairs kernel: usb 2-2: new low speed USB device using uhci_hcd and address 3
Jun 6 17:25:44 upstairs kernel: usb 2-2: configuration #1 chosen from 1 choice
Jun 6 17:25:44 upstairs kernel: usb 2-2: New USB device found, idVendor=045e, idProduct=00f1
Jun 6 17:25:44 upstairs kernel: usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Jun 6 17:25:44 upstairs kernel: usb 2-2: Product: Microsoft Wireless Desktop Receiver 3.1A
Jun 6 17:25:44 upstairs kernel: usb 2-2: Manufacturer: Microsft
Jun 6 17:25:44 upstairs kernel: usb 9-2: new full speed USB device using ohci_hcd and address 2
Jun 6 17:25:44 upstairs kernel: usb 9-2: not running at top speed; connect to a high speed hub
Jun 6 17:25:44 upstairs kernel: usb 9-2: configuration #1 chosen from 1 choice
Jun 6 17:25:44 upstairs kernel: hub 9-2:1.0: USB hub found
Jun 6 17:25:44 upstairs kernel: hub 9-2:1.0: 4 ports detected
Jun 6 17:25:44 upstairs kernel: usb usb10: New USB device found, idVendor=1d6b, idProduct=0001
Jun 6 17:25:44 upstairs kernel: usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jun 6 17:25:44 upstairs kernel: usb usb10: Product: OHCI Host Controller
Jun 6 17:25:44 upstairs kernel: usb usb10: Manufacturer: Linux 2.6.26-rc5 ohci_hcd
Jun 6 17:25:44 upstairs kernel: usb usb10: SerialNumber: 0000:02:0a.1
Jun 6 17:25:44 upstairs kernel: ACPI: PCI Interrupt 0000:02:0a.2[C] -> GSI 23 (level, low) -> IRQ 23
Jun 6 17:25:44 upstairs kernel: ehci_hcd 0000:02:0a.2: EHCI Host Controller
Jun 6 17:25:44 upstairs kernel: ehci_hcd 0000:02:0a.2: new USB bus registered, assigned bus number 11
Jun 6 17:25:44 upstairs kernel: ehci_hcd 0000:02:0a.2: irq 23, io mem 0xfbfff800
Jun 6 17:25:44 upstairs kernel: ehci_hcd 0000:02:0a.2: USB 2.0 started, EHCI 0.95, driver 10 Dec 2004
Jun 6 17:25:44 upstairs kernel: usb usb11: configuration #1 chosen from 1 choice
Jun 6 17:25:44 upstairs kernel: hub 11-0:1.0: USB hub found
Jun 6 17:25:44 upstairs kernel: hub 11-0:1.0: 5 ports detected
Jun 6 17:25:44 upstairs kernel: usb 9-2: New USB device found, idVendor=0409, idProduct=0059
Jun 6 17:25:44 upstairs kernel: usb 9-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Jun 6 17:25:44 upstairs kernel: usb 9-2: USB disconnect, address 2
Jun 6 17:25:44 upstairs kernel: usb usb11: New USB device found, idVendor=1d6b, idProduct=0002
Jun 6 17:25:44 upstairs kernel: usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jun 6 17:25:44 upstairs kernel: usb usb11: Product: EHCI Host Controller
Jun 6 17:25:44 upstairs kernel: usb usb11: Manufacturer: Linux 2.6.26-rc5 ehci_hcd
Jun 6 17:25:44 upstairs kernel: usb usb11: SerialNumber: 0000:02:0a.2
Jun 6 17:25:44 upstairs kernel: ACPI: PCI Interrupt 0000:02:0b.0[A] -> GSI 22 (level, low) -> IRQ 22
Jun 6 17:25:44 upstairs kernel: ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22] MMIO=[fbfff000-fbfff7ff] Max Packet=[2048] IR/IT contexts=[4/8]
Jun 6 17:25:44 upstairs kernel: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0005
Jun 6 17:25:44 upstairs kernel: input: Microsft Microsoft Wireless Desktop Receiver 3.1A as /devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2:1.0/input/input2
Jun 6 17:25:44 upstairs kernel: input: USB HID v1.11 Keyboard [Microsft Microsoft Wireless Desktop Receiver 3.1A] on usb-0000:00:1d.1-2
Jun 6 17:25:44 upstairs kernel: usb 11-3: new high speed USB device using ehci_hcd and address 2
Jun 6 17:25:44 upstairs kernel: dib0700: loaded with support for 7 different device-types
Jun 6 17:25:44 upstairs kernel: dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in warm state.
Jun 6 17:25:44 upstairs kernel: dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
Jun 6 17:25:44 upstairs kernel: DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T)
Jun 6 17:25:44 upstairs kernel: usb 11-3: configuration #1 chosen from 1 choice
Jun 6 17:25:44 upstairs kernel: hub 11-3:1.0: USB hub found
Jun 6 17:25:44 upstairs kernel: hub 11-3:1.0: 4 ports detected
Jun 6 17:25:44 upstairs kernel: input: Microsft Microsoft Wireless Desktop Receiver 3.1A as /devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2:1.1/input/input3
Jun 6 17:25:44 upstairs kernel: input: USB HID v1.11 Mouse [Microsft Microsoft Wireless Desktop Receiver 3.1A] on usb-0000:00:1d.1-2
Jun 6 17:25:44 upstairs kernel: DVB: registering frontend 0 (DiBcom 3000MC/P)...
Jun 6 17:25:44 upstairs kernel: usb 11-3: New USB device found, idVendor=0409, idProduct=0059
Jun 6 17:25:44 upstairs kernel: usb 11-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Jun 6 17:25:44 upstairs kernel: usbcore: registered new interface driver usblp
Jun 6 17:25:44 upstairs kernel: usbcore: registered new interface driver usbhid
Jun 6 17:25:44 upstairs kernel: usbhid: v2.6:USB HID core driver
Jun 6 17:25:44 upstairs kernel: MT2060: successfully identified (IF1 = 1230)
Jun 6 17:25:44 upstairs kernel: dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
Jun 6 17:25:44 upstairs kernel: DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T)
Jun 6 17:25:44 upstairs kernel: DVB: registering frontend 1 (DiBcom 3000MC/P)...
Jun 6 17:25:44 upstairs kernel: MT2060: successfully identified (IF1 = 1234)
Jun 6 17:25:44 upstairs kernel: ieee1394: Host added: ID:BUS[0-00:1023] GUID[00110666000013cc]
Jun 6 17:25:44 upstairs kernel: input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1e.0/0000:02:09.2/usb8/8-1/input/input4
Jun 6 17:25:44 upstairs kernel: dvb-usb: schedule remote query interval to 150 msecs.
Jun 6 17:25:44 upstairs kernel: dvb-usb: Hauppauge Nova-T 500 Dual DVB-T successfully initialized and connected.
Jun 6 17:25:44 upstairs kernel: usbcore: registered new interface driver dvb_usb_dib0700
Jun 6 17:25:44 upstairs kernel: fuse init (API version 7.9)
Jun 6 17:25:44 upstairs kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Jun 6 17:25:44 upstairs kernel: kjournald starting. Commit interval 5 seconds
Jun 6 17:25:44 upstairs kernel: EXT3 FS on sdb6, internal journal
Jun 6 17:25:44 upstairs kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jun 6 17:25:44 upstairs kernel: kjournald starting. Commit interval 5 seconds
Jun 6 17:25:44 upstairs kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Jun 6 17:25:44 upstairs kernel: EXT3 FS on sda6, internal journal
Jun 6 17:25:44 upstairs kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jun 6 17:25:44 upstairs kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Jun 6 17:25:44 upstairs kernel: kjournald starting. Commit interval 5 seconds
Jun 6 17:25:44 upstairs kernel: EXT3 FS on sda7, internal journal
Jun 6 17:25:44 upstairs kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jun 6 17:25:44 upstairs kernel: kjournald starting. Commit interval 5 seconds
Jun 6 17:25:44 upstairs kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Jun 6 17:25:44 upstairs kernel: EXT3 FS on sdc2, internal journal
Jun 6 17:25:44 upstairs kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jun 6 17:25:44 upstairs kernel: Adding 4096532k swap on /dev/sda5. Priority:-1 extents:1 across:4096532k
Jun 6 17:25:44 upstairs kernel: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Jun 6 17:25:44 upstairs kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
Jun 6 17:25:44 upstairs kernel: nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
Jun 6 17:25:44 upstairs kernel: parport_pc 00:06: disabled
Jun 6 17:25:44 upstairs kernel: pnp: the driver 'parport_pc' has been unregistered
Jun 6 17:25:44 upstairs kernel: ieee1394: Node removed: ID:BUS[0-00:1023] GUID[00110666000013cc]
Jun 6 17:26:31 upstairs kernel: usb 11-2: new high speed USB device using ehci_hcd and address 3
Jun 6 17:26:31 upstairs kernel: usb 11-2: configuration #1 chosen from 1 choice
Jun 6 17:26:31 upstairs kernel: usb 11-2: New USB device found, idVendor=0930, idProduct=6545
Jun 6 17:26:31 upstairs kernel: usb 11-2: New USB device strings: Mfr=0, Product=2, SerialNumber=3
Jun 6 17:26:31 upstairs kernel: usb 11-2: Product: USB Flash Memory
Jun 6 17:26:31 upstairs kernel: usb 11-2: SerialNumber: 0EC065712361A91E
Jun 6 17:26:31 upstairs kernel: Initializing USB Mass Storage driver...
Jun 6 17:26:31 upstairs kernel: scsi4 : SCSI emulation for USB Mass Storage devices
Jun 6 17:26:31 upstairs kernel: usbcore: registered new interface driver usb-storage
Jun 6 17:26:31 upstairs kernel: USB Mass Storage support registered.
Jun 6 17:26:31 upstairs kernel: usb-storage: device found at 3
Jun 6 17:26:31 upstairs kernel: usb-storage: waiting for device to settle before scanning
Jun 6 17:26:36 upstairs kernel: scsi 4:0:0:0: Direct-Access USB Flash Memory 5.00 PQ: 0 ANSI: 0 CCS
Jun 6 17:26:37 upstairs kernel: sd 4:0:0:0: [sdd] 2013184 512-byte hardware sectors (1031 MB)
Jun 6 17:26:37 upstairs kernel: sd 4:0:0:0: [sdd] Write Protect is off
Jun 6 17:26:37 upstairs kernel: sd 4:0:0:0: [sdd] Mode Sense: 23 00 00 00
Jun 6 17:26:37 upstairs kernel: sd 4:0:0:0: [sdd] Assuming drive cache: write through
Jun 6 17:26:38 upstairs kernel: sd 4:0:0:0: [sdd] 2013184 512-byte hardware sectors (1031 MB)
Jun 6 17:26:38 upstairs kernel: sd 4:0:0:0: [sdd] Write Protect is off
Jun 6 17:26:38 upstairs kernel: sd 4:0:0:0: [sdd] Mode Sense: 23 00 00 00
Jun 6 17:26:38 upstairs kernel: sd 4:0:0:0: [sdd] Assuming drive cache: write through
Jun 6 17:26:38 upstairs kernel: sdd: sdd1
Jun 6 17:26:38 upstairs kernel: sd 4:0:0:0: [sdd] Attached SCSI removable disk
Jun 6 17:26:38 upstairs kernel: usb-storage: device scan complete
next prev parent reply other threads:[~2008-06-06 17:38 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-06-01 4:15 2,6.26-rc4-git2 - long pause during boot Chris Clayton
2008-06-06 5:17 ` Andrew Morton
2008-06-06 6:07 ` Chris Clayton
2008-06-06 6:21 ` Andrew Morton
2008-06-06 6:25 ` Andrew Morton
2008-06-06 15:22 ` James Bottomley
2008-06-06 18:03 ` Andrew Morton
2008-06-06 18:40 ` James Bottomley
2008-06-06 18:40 ` James Bottomley
2008-06-07 5:16 ` Chris Clayton
[not found] ` <1212777612.16182.21.camel-bi+AKbBUZKY6gyzm1THtWbp2dZbC/Bob@public.gmane.org>
2008-06-08 6:19 ` Chris Clayton
2008-06-08 6:19 ` Chris Clayton
[not found] ` <200806080619.17531.chris2553-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>
2008-06-08 18:37 ` James Bottomley
2008-06-08 18:37 ` James Bottomley
2008-06-09 23:07 ` Greg KH
[not found] ` <20080609230747.GD23391-U8xfFu+wG4EAvxtiuMwx3w@public.gmane.org>
2008-06-10 18:49 ` Chris Clayton
2008-06-10 18:49 ` Chris Clayton
[not found] ` <1212950276.3574.7.camel-bi+AKbBUZKY6gyzm1THtWbp2dZbC/Bob@public.gmane.org>
2008-06-10 22:06 ` Chris Clayton
2008-06-10 22:06 ` Chris Clayton
2008-06-10 22:19 ` Alan Stern
2008-06-10 22:19 ` Alan Stern
2008-06-11 18:58 ` Chris Clayton
2008-06-11 19:15 ` Greg KH
2008-06-11 19:24 ` James Bottomley
2008-06-11 19:29 ` Stefan Richter
2008-06-11 19:36 ` James Bottomley
[not found] ` <1213212965.3461.12.camel-bi+AKbBUZKY6gyzm1THtWbp2dZbC/Bob@public.gmane.org>
2008-06-13 6:56 ` Chris Clayton
2008-06-13 6:56 ` Chris Clayton
2008-06-13 14:12 ` James Bottomley
2008-06-11 19:33 ` Greg KH
2008-06-11 19:51 ` Chris Clayton
2008-06-11 21:04 ` Stefan Richter
2008-06-11 21:46 ` Stefan Richter
[not found] ` <485047C1.3020200-MtYdepGKPcBMYopoZt5u/LNAH6kLmebB@public.gmane.org>
2008-06-11 22:03 ` Stefan Richter
2008-06-11 22:03 ` Stefan Richter
[not found] ` <48504B94.9050100-MtYdepGKPcBMYopoZt5u/LNAH6kLmebB@public.gmane.org>
2008-06-14 6:03 ` Chris Clayton
2008-06-14 6:03 ` Chris Clayton
2008-06-09 14:46 ` Alan Stern
2008-06-09 14:46 ` Alan Stern
2008-06-09 19:10 ` Stefan Richter
2008-06-09 19:10 ` Stefan Richter
2008-06-09 19:40 ` Alan Stern
2008-06-09 19:40 ` Alan Stern
2008-06-09 21:35 ` Chris Clayton
2008-06-09 21:35 ` Chris Clayton
2008-06-10 19:00 ` Chris Clayton
2008-06-10 19:00 ` Chris Clayton
2008-06-10 19:38 ` Stefan Richter
2008-06-10 19:38 ` Stefan Richter
2008-06-06 14:11 ` James Bottomley
2008-06-06 14:42 ` Rafael J. Wysocki
2008-06-06 17:42 ` Chris Clayton
2008-06-06 17:35 ` Chris Clayton [this message]
2008-06-09 4:51 ` Grant Grundler
2008-06-10 18:46 ` Chris Clayton
2008-06-06 10:45 ` Rafael J. Wysocki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200806061735.35268.chris2553@googlemail.com \
--to=chris2553@googlemail.com \
--cc=James.Bottomley@hansenpartnership.com \
--cc=akpm@linux-foundation.org \
--cc=hare@suse.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=rjw@sisk.pl \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.