All of lore.kernel.org
 help / color / mirror / Atom feed
From: Chris Clayton <chris2553@googlemail.com>
To: Stefan Richter <stefanr@s5r6.in-berlin.de>
Cc: James Bottomley <James.Bottomley@hansenpartnership.com>,
	SCSI development list <linux-scsi@vger.kernel.org>,
	USB list <linux-usb@vger.kernel.org>,
	LKML <linux-kernel@vger.kernel.org>,
	"Rafael J. Wysocki" <rjw@sisk.pl>,
	Alan Stern <stern@rowland.harvard.edu>,
	Hannes Reinecke <hare@suse.de>,
	Andrew Morton <akpm@linux-foundation.org>,
	linux1394-devel@lists.sourceforge.net
Subject: Re: 2,6.26-rc4-git2 - long pause during boot
Date: Tue, 10 Jun 2008 19:00:43 +0000	[thread overview]
Message-ID: <200806101900.43572.chris2553@googlemail.com> (raw)
In-Reply-To: <484D8019.3090900@s5r6.in-berlin.de>

On Monday 09 June 2008, Stefan Richter wrote:
> Alan Stern wrote:
> > In fact the log shows that the 30-second delay occurs in the middle of
> > ohci1394 (Firewire) initialization, not USB initialization:
> >
> > Jun  8 05:26:35 upstairs kernel: ohci1394: fw-host0: OHCI-1394 1.1 (PCI):
> > IRQ=[22]  MMIO=[fbfff000-fbfff7ff]  Max Packet=[2048]  IR/IT
> > contexts=[4/8] Jun  8 05:26:35 upstairs kernel: ohci_hcd 0000:02:0a.0:
> > urb f71cb680 path 2 ep1in 5e160000 cc 5 --> status -62 Jun  8 05:26:35
> > upstairs kernel: hub 1-2:1.0: transfer --> -62
> > Jun  8 05:27:08 upstairs kernel: driver: '0000:02:0b.0': driver_bound:
> > bound to device 'ohci1394' Jun  8 05:27:08 upstairs kernel: bus: 'pci':
> > really_probe: bound device 0000:02:0b.0 to driver ohci1394
>
> The log at http://lkml.org/lkml/2008/6/6/317 shows two pauses.  One in
> the middle of USB related messages with no FireWire stuff around
> (17:25:19 to 17:25:44).  The other with parport, ieee1394, USB messages
> around it (17:25:44 to 17:26:31).
>
>  From there, the last 17:25:44 message is strange:  The device
> 00110666000013cc which is the controller is reported as being removed.
> Chris, did you do something at this point?

Ah sorry, that's a legacy of when I had considerably less ram than 2GB. I only 
use firewire on the rare occasion that I want to grab some video from my camera 
and I use the parallel port even less frequently. So one of the last things 
that happens in my rc.local init script is that I unload the related drivers.

>
> Also, in http://lkml.org/lkml/2008/6/1/2 you reported a patch which
> changes the SCSI core's interaction with the driver core as first bad
> commit.  Did you check that going before this commit removes _all_ the
> pauses, even those around USB or FireWire messages?  Or did you only
> check whether disk drives appear quickly?

When I was bisecting, I assessed good or bad based on whether I experienced the 
long pause during boot up. You may have seen my reply to James a short while 
ago that I have bisected again and arrived at the same patch.

Thanks,

Chris



-- 
Beauty is in the eye of the beerholder.

-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php

WARNING: multiple messages have this Message-ID (diff)
From: Chris Clayton <chris2553@googlemail.com>
To: Stefan Richter <stefanr@s5r6.in-berlin.de>
Cc: Alan Stern <stern@rowland.harvard.edu>,
	"Rafael J. Wysocki" <rjw@sisk.pl>,
	SCSI development list <linux-scsi@vger.kernel.org>,
	USB list <linux-usb@vger.kernel.org>,
	LKML <linux-kernel@vger.kernel.org>,
	James Bottomley <James.Bottomley@hansenpartnership.com>,
	Hannes Reinecke <hare@suse.de>,
	Andrew Morton <akpm@linux-foundation.org>,
	linux1394-devel@lists.sourceforge.net
Subject: Re: 2,6.26-rc4-git2 - long pause during boot
Date: Tue, 10 Jun 2008 19:00:43 +0000	[thread overview]
Message-ID: <200806101900.43572.chris2553@googlemail.com> (raw)
In-Reply-To: <484D8019.3090900@s5r6.in-berlin.de>

On Monday 09 June 2008, Stefan Richter wrote:
> Alan Stern wrote:
> > In fact the log shows that the 30-second delay occurs in the middle of
> > ohci1394 (Firewire) initialization, not USB initialization:
> >
> > Jun  8 05:26:35 upstairs kernel: ohci1394: fw-host0: OHCI-1394 1.1 (PCI):
> > IRQ=[22]  MMIO=[fbfff000-fbfff7ff]  Max Packet=[2048]  IR/IT
> > contexts=[4/8] Jun  8 05:26:35 upstairs kernel: ohci_hcd 0000:02:0a.0:
> > urb f71cb680 path 2 ep1in 5e160000 cc 5 --> status -62 Jun  8 05:26:35
> > upstairs kernel: hub 1-2:1.0: transfer --> -62
> > Jun  8 05:27:08 upstairs kernel: driver: '0000:02:0b.0': driver_bound:
> > bound to device 'ohci1394' Jun  8 05:27:08 upstairs kernel: bus: 'pci':
> > really_probe: bound device 0000:02:0b.0 to driver ohci1394
>
> The log at http://lkml.org/lkml/2008/6/6/317 shows two pauses.  One in
> the middle of USB related messages with no FireWire stuff around
> (17:25:19 to 17:25:44).  The other with parport, ieee1394, USB messages
> around it (17:25:44 to 17:26:31).
>
>  From there, the last 17:25:44 message is strange:  The device
> 00110666000013cc which is the controller is reported as being removed.
> Chris, did you do something at this point?

Ah sorry, that's a legacy of when I had considerably less ram than 2GB. I only 
use firewire on the rare occasion that I want to grab some video from my camera 
and I use the parallel port even less frequently. So one of the last things 
that happens in my rc.local init script is that I unload the related drivers.

>
> Also, in http://lkml.org/lkml/2008/6/1/2 you reported a patch which
> changes the SCSI core's interaction with the driver core as first bad
> commit.  Did you check that going before this commit removes _all_ the
> pauses, even those around USB or FireWire messages?  Or did you only
> check whether disk drives appear quickly?

When I was bisecting, I assessed good or bad based on whether I experienced the 
long pause during boot up. You may have seen my reply to James a short while 
ago that I have bisected again and arrived at the same patch.

Thanks,

Chris



-- 
Beauty is in the eye of the beerholder.

  parent reply	other threads:[~2008-06-10 19:00 UTC|newest]

Thread overview: 56+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-06-01  4:15 2,6.26-rc4-git2 - long pause during boot Chris Clayton
2008-06-06  5:17 ` Andrew Morton
2008-06-06  6:07   ` Chris Clayton
2008-06-06  6:21     ` Andrew Morton
2008-06-06  6:25       ` Andrew Morton
2008-06-06 15:22         ` James Bottomley
2008-06-06 18:03           ` Andrew Morton
2008-06-06 18:40             ` James Bottomley
2008-06-06 18:40               ` James Bottomley
2008-06-07  5:16               ` Chris Clayton
     [not found]               ` <1212777612.16182.21.camel-bi+AKbBUZKY6gyzm1THtWbp2dZbC/Bob@public.gmane.org>
2008-06-08  6:19                 ` Chris Clayton
2008-06-08  6:19                   ` Chris Clayton
     [not found]                   ` <200806080619.17531.chris2553-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>
2008-06-08 18:37                     ` James Bottomley
2008-06-08 18:37                       ` James Bottomley
2008-06-09 23:07                       ` Greg KH
     [not found]                         ` <20080609230747.GD23391-U8xfFu+wG4EAvxtiuMwx3w@public.gmane.org>
2008-06-10 18:49                           ` Chris Clayton
2008-06-10 18:49                             ` Chris Clayton
     [not found]                       ` <1212950276.3574.7.camel-bi+AKbBUZKY6gyzm1THtWbp2dZbC/Bob@public.gmane.org>
2008-06-10 22:06                         ` Chris Clayton
2008-06-10 22:06                           ` Chris Clayton
2008-06-10 22:19                           ` Alan Stern
2008-06-10 22:19                             ` Alan Stern
2008-06-11 18:58                           ` Chris Clayton
2008-06-11 19:15                             ` Greg KH
2008-06-11 19:24                               ` James Bottomley
2008-06-11 19:29                                 ` Stefan Richter
2008-06-11 19:36                                   ` James Bottomley
     [not found]                                     ` <1213212965.3461.12.camel-bi+AKbBUZKY6gyzm1THtWbp2dZbC/Bob@public.gmane.org>
2008-06-13  6:56                                       ` Chris Clayton
2008-06-13  6:56                                         ` Chris Clayton
2008-06-13 14:12                                         ` James Bottomley
2008-06-11 19:33                                 ` Greg KH
2008-06-11 19:51                               ` Chris Clayton
2008-06-11 21:04                                 ` Stefan Richter
2008-06-11 21:46                                 ` Stefan Richter
     [not found]                                   ` <485047C1.3020200-MtYdepGKPcBMYopoZt5u/LNAH6kLmebB@public.gmane.org>
2008-06-11 22:03                                     ` Stefan Richter
2008-06-11 22:03                                       ` Stefan Richter
     [not found]                                       ` <48504B94.9050100-MtYdepGKPcBMYopoZt5u/LNAH6kLmebB@public.gmane.org>
2008-06-14  6:03                                         ` Chris Clayton
2008-06-14  6:03                                           ` Chris Clayton
2008-06-09 14:46                     ` Alan Stern
2008-06-09 14:46                       ` Alan Stern
2008-06-09 19:10                       ` Stefan Richter
2008-06-09 19:10                         ` Stefan Richter
2008-06-09 19:40                         ` Alan Stern
2008-06-09 19:40                           ` Alan Stern
2008-06-09 21:35                           ` Chris Clayton
2008-06-09 21:35                             ` Chris Clayton
2008-06-10 19:00                         ` Chris Clayton [this message]
2008-06-10 19:00                           ` Chris Clayton
2008-06-10 19:38                           ` Stefan Richter
2008-06-10 19:38                             ` Stefan Richter
2008-06-06 14:11     ` James Bottomley
2008-06-06 14:42       ` Rafael J. Wysocki
2008-06-06 17:42         ` Chris Clayton
2008-06-06 17:35       ` Chris Clayton
2008-06-09  4:51         ` Grant Grundler
2008-06-10 18:46           ` Chris Clayton
2008-06-06 10:45   ` Rafael J. Wysocki

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200806101900.43572.chris2553@googlemail.com \
    --to=chris2553@googlemail.com \
    --cc=James.Bottomley@hansenpartnership.com \
    --cc=akpm@linux-foundation.org \
    --cc=hare@suse.de \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=linux1394-devel@lists.sourceforge.net \
    --cc=rjw@sisk.pl \
    --cc=stefanr@s5r6.in-berlin.de \
    --cc=stern@rowland.harvard.edu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.