From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
To: linux-ide@vger.kernel.org
Cc: linuxppc-dev@ozlabs.org,
Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>,
Benjamin Herrenschmidt <benh@kernel.crashing.org>,
linux-kernel@vger.kernel.org
Subject: [PATCH 6/7] ide-pmac: add ->init_dev method
Date: Fri, 13 Jun 2008 01:13:09 +0200 [thread overview]
Message-ID: <20080612231309.18335.27624.sendpatchset@localhost.localdomain> (raw)
In-Reply-To: <20080612231224.18335.91182.sendpatchset@localhost.localdomain>
There should be no functional changes caused by this patch.
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
drivers/ide/ppc/pmac.c | 27 ++++++++++++++++++---------
1 file changed, 18 insertions(+), 9 deletions(-)
Index: b/drivers/ide/ppc/pmac.c
===================================================================
--- a/drivers/ide/ppc/pmac.c
+++ b/drivers/ide/ppc/pmac.c
@@ -941,7 +941,23 @@ static u8 pmac_ide_cable_detect(ide_hwif
return ATA_CBL_PATA40;
}
+static void pmac_ide_init_dev(ide_drive_t *drive)
+{
+ ide_hwif_t *hwif = drive->hwif;
+ pmac_ide_hwif_t *pmif =
+ (pmac_ide_hwif_t *)drv_get_drvdata(hwif->gendev.parent);
+
+ if (pmif->mediabay) {
+#ifdef CONFIG_PMAC_MEDIABAY
+ if (check_media_bay(np->parent, MB_CD) == -ENODEV)
+ return;
+#endif
+ drive->noprobe = 1;
+ }
+}
+
static const struct ide_port_ops pmac_ide_ata6_port_ops = {
+ .init_dev = pmac_ide_init_dev,
.set_pio_mode = pmac_ide_set_pio_mode,
.set_dma_mode = pmac_ide_set_dma_mode,
.selectproc = pmac_ide_kauai_selectproc,
@@ -949,6 +965,7 @@ static const struct ide_port_ops pmac_id
};
static const struct ide_port_ops pmac_ide_ata4_port_ops = {
+ .init_dev = pmac_ide_init_dev,
.set_pio_mode = pmac_ide_set_pio_mode,
.set_dma_mode = pmac_ide_set_dma_mode,
.selectproc = pmac_ide_selectproc,
@@ -956,6 +973,7 @@ static const struct ide_port_ops pmac_id
};
static const struct ide_port_ops pmac_ide_port_ops = {
+ .init_dev = pmac_ide_init_dev,
.set_pio_mode = pmac_ide_set_pio_mode,
.set_dma_mode = pmac_ide_set_dma_mode,
.selectproc = pmac_ide_selectproc,
@@ -1065,15 +1083,6 @@ pmac_ide_setup_device(pmac_ide_hwif_t *p
hwif->index, model_name[pmif->kind], pmif->aapl_bus_id,
pmif->mediabay ? " (mediabay)" : "", hwif->irq);
- if (pmif->mediabay) {
-#ifdef CONFIG_PMAC_MEDIABAY
- if (check_media_bay(np->parent, MB_CD) == -ENODEV)
- break;
-#endif
- hwif->drives[0].noprobe = 1;
- hwif->drives[1].noprobe = 1;
- }
-
idx[0] = hwif->index;
ide_device_add(idx, &d);
WARNING: multiple messages have this Message-ID (diff)
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
To: linux-ide@vger.kernel.org
Cc: linuxppc-dev@ozlabs.org, linux-kernel@vger.kernel.org,
Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Subject: [PATCH 6/7] ide-pmac: add ->init_dev method
Date: Fri, 13 Jun 2008 01:13:09 +0200 [thread overview]
Message-ID: <20080612231309.18335.27624.sendpatchset@localhost.localdomain> (raw)
In-Reply-To: <20080612231224.18335.91182.sendpatchset@localhost.localdomain>
There should be no functional changes caused by this patch.
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
drivers/ide/ppc/pmac.c | 27 ++++++++++++++++++---------
1 file changed, 18 insertions(+), 9 deletions(-)
Index: b/drivers/ide/ppc/pmac.c
===================================================================
--- a/drivers/ide/ppc/pmac.c
+++ b/drivers/ide/ppc/pmac.c
@@ -941,7 +941,23 @@ static u8 pmac_ide_cable_detect(ide_hwif
return ATA_CBL_PATA40;
}
+static void pmac_ide_init_dev(ide_drive_t *drive)
+{
+ ide_hwif_t *hwif = drive->hwif;
+ pmac_ide_hwif_t *pmif =
+ (pmac_ide_hwif_t *)drv_get_drvdata(hwif->gendev.parent);
+
+ if (pmif->mediabay) {
+#ifdef CONFIG_PMAC_MEDIABAY
+ if (check_media_bay(np->parent, MB_CD) == -ENODEV)
+ return;
+#endif
+ drive->noprobe = 1;
+ }
+}
+
static const struct ide_port_ops pmac_ide_ata6_port_ops = {
+ .init_dev = pmac_ide_init_dev,
.set_pio_mode = pmac_ide_set_pio_mode,
.set_dma_mode = pmac_ide_set_dma_mode,
.selectproc = pmac_ide_kauai_selectproc,
@@ -949,6 +965,7 @@ static const struct ide_port_ops pmac_id
};
static const struct ide_port_ops pmac_ide_ata4_port_ops = {
+ .init_dev = pmac_ide_init_dev,
.set_pio_mode = pmac_ide_set_pio_mode,
.set_dma_mode = pmac_ide_set_dma_mode,
.selectproc = pmac_ide_selectproc,
@@ -956,6 +973,7 @@ static const struct ide_port_ops pmac_id
};
static const struct ide_port_ops pmac_ide_port_ops = {
+ .init_dev = pmac_ide_init_dev,
.set_pio_mode = pmac_ide_set_pio_mode,
.set_dma_mode = pmac_ide_set_dma_mode,
.selectproc = pmac_ide_selectproc,
@@ -1065,15 +1083,6 @@ pmac_ide_setup_device(pmac_ide_hwif_t *p
hwif->index, model_name[pmif->kind], pmif->aapl_bus_id,
pmif->mediabay ? " (mediabay)" : "", hwif->irq);
- if (pmif->mediabay) {
-#ifdef CONFIG_PMAC_MEDIABAY
- if (check_media_bay(np->parent, MB_CD) == -ENODEV)
- break;
-#endif
- hwif->drives[0].noprobe = 1;
- hwif->drives[1].noprobe = 1;
- }
-
idx[0] = hwif->index;
ide_device_add(idx, &d);
next prev parent reply other threads:[~2008-06-12 23:11 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-06-12 23:12 [PATCH 1/7] ide-pmac: bugfix for media-bay support rework Bartlomiej Zolnierkiewicz
2008-06-12 23:12 ` Bartlomiej Zolnierkiewicz
2008-06-12 23:12 ` [PATCH 2/7] ide-pmac: add ->cable_detect method Bartlomiej Zolnierkiewicz
2008-06-12 23:12 ` Bartlomiej Zolnierkiewicz
2008-06-12 23:12 ` [PATCH 3/7] ide-pmac: remove bogus comment about pmac_ide_setup_device() Bartlomiej Zolnierkiewicz
2008-06-12 23:12 ` Bartlomiej Zolnierkiewicz
2008-06-12 23:12 ` [PATCH 4/7] ide-pmac: media-bay support fixes Bartlomiej Zolnierkiewicz
2008-06-12 23:12 ` Bartlomiej Zolnierkiewicz
2008-06-12 23:13 ` [PATCH 5/7] ide-pmac: store pmif instead of hwif in ->driver_data Bartlomiej Zolnierkiewicz
2008-06-12 23:13 ` Bartlomiej Zolnierkiewicz
2008-06-12 23:13 ` Bartlomiej Zolnierkiewicz [this message]
2008-06-12 23:13 ` [PATCH 6/7] ide-pmac: add ->init_dev method Bartlomiej Zolnierkiewicz
2008-06-12 23:13 ` [PATCH 7/7] ide-pmac: move ide_find_port() call to pmac_ide_setup_device() Bartlomiej Zolnierkiewicz
2008-06-12 23:13 ` Bartlomiej Zolnierkiewicz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080612231309.18335.27624.sendpatchset@localhost.localdomain \
--to=bzolnier@gmail.com \
--cc=benh@kernel.crashing.org \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.