All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jack Steiner <steiner@sgi.com>
To: mingo@elte.hu, tglx@linutronix.de
Cc: linux-mm@kvack.org, linux-kernel@vger.kernel.org
Subject: [PATCH] - Fix stack overflow for large values of MAX_APICS
Date: Thu, 19 Jun 2008 21:51:05 -0500	[thread overview]
Message-ID: <20080620025104.GA25571@sgi.com> (raw)

physid_mask_of_physid() causes a huge stack (12k) to be created if the
number of APICS is large. Replace physid_mask_of_physid() with a
new function that does not create large stacks. This is a problem only
on large x86_64 systems.

Signed-off-by: Jack Steiner <steiner@sgi.com>

---

Ingo - the "Increase MAX_APICS patch" can now works. Do you
want me to resend???



 arch/x86/kernel/apic_32.c |    2 +-
 arch/x86/kernel/apic_64.c |    2 +-
 arch/x86/kernel/smpboot.c |    5 ++---
 include/asm-x86/mpspec.h  |    7 +++++++
 4 files changed, 11 insertions(+), 5 deletions(-)

Index: linux/arch/x86/kernel/apic_32.c
===================================================================
--- linux.orig/arch/x86/kernel/apic_32.c	2008-06-19 11:50:07.000000000 -0500
+++ linux/arch/x86/kernel/apic_32.c	2008-06-19 19:28:04.000000000 -0500
@@ -1267,7 +1267,7 @@ int __init APIC_init_uniprocessor(void)
 #ifdef CONFIG_CRASH_DUMP
 	boot_cpu_physical_apicid = GET_APIC_ID(read_apic_id());
 #endif
-	phys_cpu_present_map = physid_mask_of_physid(boot_cpu_physical_apicid);
+	physid_set_mask_of_physid(boot_cpu_physical_apicid, &phys_cpu_present_map);
 
 	setup_local_APIC();
 
Index: linux/arch/x86/kernel/apic_64.c
===================================================================
--- linux.orig/arch/x86/kernel/apic_64.c	2008-06-19 15:59:58.000000000 -0500
+++ linux/arch/x86/kernel/apic_64.c	2008-06-19 19:25:18.000000000 -0500
@@ -920,7 +920,7 @@ int __init APIC_init_uniprocessor(void)
 
 	connect_bsp_APIC();
 
-	phys_cpu_present_map = physid_mask_of_physid(boot_cpu_physical_apicid);
+	physid_set_mask_of_physid(boot_cpu_physical_apicid, &phys_cpu_present_map);
 	apic_write(APIC_ID, SET_APIC_ID(boot_cpu_physical_apicid));
 
 	setup_local_APIC();
Index: linux/arch/x86/kernel/smpboot.c
===================================================================
--- linux.orig/arch/x86/kernel/smpboot.c	2008-06-19 19:06:00.000000000 -0500
+++ linux/arch/x86/kernel/smpboot.c	2008-06-19 19:37:37.000000000 -0500
@@ -1042,10 +1042,9 @@ static __init void disable_smp(void)
 	smpboot_clear_io_apic_irqs();
 
 	if (smp_found_config)
-		phys_cpu_present_map =
-				physid_mask_of_physid(boot_cpu_physical_apicid);
+		physid_set_mask_of_physid(boot_cpu_physical_apicid, &phys_cpu_present_map);
 	else
-		phys_cpu_present_map = physid_mask_of_physid(0);
+		physid_set_mask_of_physid(0, &phys_cpu_present_map);
 	map_cpu_to_logical_apicid();
 	cpu_set(0, per_cpu(cpu_sibling_map, 0));
 	cpu_set(0, per_cpu(cpu_core_map, 0));
Index: linux/include/asm-x86/mpspec.h
===================================================================
--- linux.orig/include/asm-x86/mpspec.h	2008-06-19 11:50:09.000000000 -0500
+++ linux/include/asm-x86/mpspec.h	2008-06-19 19:39:11.000000000 -0500
@@ -122,6 +122,7 @@ typedef struct physid_mask physid_mask_t
 		__physid_mask;						\
 	})
 
+/* Note: will create very large stack frames if physid_mask_t is big */
 #define physid_mask_of_physid(physid)					\
 	({								\
 		physid_mask_t __physid_mask = PHYSID_MASK_NONE;		\
@@ -129,6 +130,12 @@ typedef struct physid_mask physid_mask_t
 		__physid_mask;						\
 	})
 
+static inline void physid_set_mask_of_physid(int physid, physid_mask_t *map)
+{
+	physids_clear(*map);
+	physid_set(physid, *map);
+}
+
 #define PHYSID_MASK_ALL		{ {[0 ... PHYSID_ARRAY_SIZE-1] = ~0UL} }
 #define PHYSID_MASK_NONE	{ {[0 ... PHYSID_ARRAY_SIZE-1] = 0UL} }
 

WARNING: multiple messages have this Message-ID (diff)
From: Jack Steiner <steiner@sgi.com>
To: mingo@elte.hu, tglx@linutronix.de
Cc: linux-mm@kvack.org, linux-kernel@vger.kernel.org
Subject: [PATCH] - Fix stack overflow for large values of MAX_APICS
Date: Thu, 19 Jun 2008 21:51:05 -0500	[thread overview]
Message-ID: <20080620025104.GA25571@sgi.com> (raw)

physid_mask_of_physid() causes a huge stack (12k) to be created if the
number of APICS is large. Replace physid_mask_of_physid() with a
new function that does not create large stacks. This is a problem only
on large x86_64 systems.

Signed-off-by: Jack Steiner <steiner@sgi.com>

---

Ingo - the "Increase MAX_APICS patch" can now works. Do you
want me to resend???



 arch/x86/kernel/apic_32.c |    2 +-
 arch/x86/kernel/apic_64.c |    2 +-
 arch/x86/kernel/smpboot.c |    5 ++---
 include/asm-x86/mpspec.h  |    7 +++++++
 4 files changed, 11 insertions(+), 5 deletions(-)

Index: linux/arch/x86/kernel/apic_32.c
===================================================================
--- linux.orig/arch/x86/kernel/apic_32.c	2008-06-19 11:50:07.000000000 -0500
+++ linux/arch/x86/kernel/apic_32.c	2008-06-19 19:28:04.000000000 -0500
@@ -1267,7 +1267,7 @@ int __init APIC_init_uniprocessor(void)
 #ifdef CONFIG_CRASH_DUMP
 	boot_cpu_physical_apicid = GET_APIC_ID(read_apic_id());
 #endif
-	phys_cpu_present_map = physid_mask_of_physid(boot_cpu_physical_apicid);
+	physid_set_mask_of_physid(boot_cpu_physical_apicid, &phys_cpu_present_map);
 
 	setup_local_APIC();
 
Index: linux/arch/x86/kernel/apic_64.c
===================================================================
--- linux.orig/arch/x86/kernel/apic_64.c	2008-06-19 15:59:58.000000000 -0500
+++ linux/arch/x86/kernel/apic_64.c	2008-06-19 19:25:18.000000000 -0500
@@ -920,7 +920,7 @@ int __init APIC_init_uniprocessor(void)
 
 	connect_bsp_APIC();
 
-	phys_cpu_present_map = physid_mask_of_physid(boot_cpu_physical_apicid);
+	physid_set_mask_of_physid(boot_cpu_physical_apicid, &phys_cpu_present_map);
 	apic_write(APIC_ID, SET_APIC_ID(boot_cpu_physical_apicid));
 
 	setup_local_APIC();
Index: linux/arch/x86/kernel/smpboot.c
===================================================================
--- linux.orig/arch/x86/kernel/smpboot.c	2008-06-19 19:06:00.000000000 -0500
+++ linux/arch/x86/kernel/smpboot.c	2008-06-19 19:37:37.000000000 -0500
@@ -1042,10 +1042,9 @@ static __init void disable_smp(void)
 	smpboot_clear_io_apic_irqs();
 
 	if (smp_found_config)
-		phys_cpu_present_map =
-				physid_mask_of_physid(boot_cpu_physical_apicid);
+		physid_set_mask_of_physid(boot_cpu_physical_apicid, &phys_cpu_present_map);
 	else
-		phys_cpu_present_map = physid_mask_of_physid(0);
+		physid_set_mask_of_physid(0, &phys_cpu_present_map);
 	map_cpu_to_logical_apicid();
 	cpu_set(0, per_cpu(cpu_sibling_map, 0));
 	cpu_set(0, per_cpu(cpu_core_map, 0));
Index: linux/include/asm-x86/mpspec.h
===================================================================
--- linux.orig/include/asm-x86/mpspec.h	2008-06-19 11:50:09.000000000 -0500
+++ linux/include/asm-x86/mpspec.h	2008-06-19 19:39:11.000000000 -0500
@@ -122,6 +122,7 @@ typedef struct physid_mask physid_mask_t
 		__physid_mask;						\
 	})
 
+/* Note: will create very large stack frames if physid_mask_t is big */
 #define physid_mask_of_physid(physid)					\
 	({								\
 		physid_mask_t __physid_mask = PHYSID_MASK_NONE;		\
@@ -129,6 +130,12 @@ typedef struct physid_mask physid_mask_t
 		__physid_mask;						\
 	})
 
+static inline void physid_set_mask_of_physid(int physid, physid_mask_t *map)
+{
+	physids_clear(*map);
+	physid_set(physid, *map);
+}
+
 #define PHYSID_MASK_ALL		{ {[0 ... PHYSID_ARRAY_SIZE-1] = ~0UL} }
 #define PHYSID_MASK_NONE	{ {[0 ... PHYSID_ARRAY_SIZE-1] = 0UL} }
 

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

             reply	other threads:[~2008-06-20  2:51 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-06-20  2:51 Jack Steiner [this message]
2008-06-20  2:51 ` [PATCH] - Fix stack overflow for large values of MAX_APICS Jack Steiner
2008-06-20 10:27 ` Ingo Molnar
2008-06-20 10:27   ` Ingo Molnar
2008-06-20 10:39 ` Ingo Molnar
2008-06-20 10:39   ` Ingo Molnar
2008-06-24 10:24   ` [bug] " Ingo Molnar
2008-06-24 10:24     ` Ingo Molnar
2008-06-24 22:03     ` Jack Steiner
2008-06-24 22:03       ` Jack Steiner
2008-06-25 20:56     ` Jack Steiner
2008-06-25 20:56       ` Jack Steiner
2008-06-26 12:32       ` Ingo Molnar
2008-06-26 12:32         ` Ingo Molnar
2008-06-26 12:41         ` Jack Steiner
2008-06-26 12:41           ` Jack Steiner
2008-06-26 22:38           ` Paul E. McKenney
2008-06-26 22:38             ` Paul E. McKenney
2008-06-26 22:58             ` Jack Steiner
2008-06-26 22:58               ` Jack Steiner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20080620025104.GA25571@sgi.com \
    --to=steiner@sgi.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=mingo@elte.hu \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.