From: "Uwe Kleine-König" <Uwe.Kleine-Koenig@digi.com>
To: <linux-kernel@vger.kernel.org>
Subject: [PATCH] handle failure of irqchip->set_type in setup_irq
Date: Wed, 25 Jun 2008 15:11:01 +0200 [thread overview]
Message-ID: <20080625131101.GA6205@digi.com> (raw)
set_type returns an int but currently setup_irq ignores that.
To save me from undoing some changes setting the IRQ_NO_BALANCING bit in
desc->flags, setting IRQ_PER_CPU in desc->status and adding the new
action to desc is only done after set_type succeeded.
Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
---
Hello,
in my case set_type returns an error because gpio-key tries to use
IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING and my irq-chip can only do
one of these.
Best regards
Uwe
kernel/irq/manage.c | 38 ++++++++++++++++++++++++--------------
1 files changed, 24 insertions(+), 14 deletions(-)
diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c
index 46d6611..bc990a1 100644
--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -281,6 +281,7 @@ int setup_irq(unsigned int irq, struct irqaction *new)
const char *old_name = NULL;
unsigned long flags;
int shared = 0;
+ int ret;
if (irq >= NR_IRQS)
return -EINVAL;
@@ -338,26 +339,23 @@ int setup_irq(unsigned int irq, struct irqaction *new)
shared = 1;
}
- *p = new;
-
- /* Exclude IRQ from balancing */
- if (new->flags & IRQF_NOBALANCING)
- desc->status |= IRQ_NO_BALANCING;
-
if (!shared) {
irq_chip_set_defaults(desc->chip);
-#if defined(CONFIG_IRQ_PER_CPU)
- if (new->flags & IRQF_PERCPU)
- desc->status |= IRQ_PER_CPU;
-#endif
-
/* Setup the type (level, edge polarity) if configured: */
if (new->flags & IRQF_TRIGGER_MASK) {
- if (desc->chip && desc->chip->set_type)
- desc->chip->set_type(irq,
+ if (desc->chip && desc->chip->set_type) {
+ ret = desc->chip->set_type(irq,
new->flags & IRQF_TRIGGER_MASK);
- else
+ if (ret) {
+ pr_err("setting flow type for irq %u "
+ "failed\n", irq);
+ spin_unlock_irqrestore(&desc->lock,
+ flags);
+ return ret;
+ }
+
+ } else
/*
* IRQF_TRIGGER_* but the PIC does not support
* multiple flow-types?
@@ -369,6 +367,11 @@ int setup_irq(unsigned int irq, struct irqaction *new)
} else
compat_irq_chip_set_default_handler(desc);
+#if defined(CONFIG_IRQ_PER_CPU)
+ if (new->flags & IRQF_PERCPU)
+ desc->status |= IRQ_PER_CPU;
+#endif
+
desc->status &= ~(IRQ_AUTODETECT | IRQ_WAITING |
IRQ_INPROGRESS | IRQ_SPURIOUS_DISABLED);
@@ -383,6 +386,13 @@ int setup_irq(unsigned int irq, struct irqaction *new)
/* Undo nested disables: */
desc->depth = 1;
}
+
+ *p = new;
+
+ /* Exclude IRQ from balancing */
+ if (new->flags & IRQF_NOBALANCING)
+ desc->status |= IRQ_NO_BALANCING;
+
/* Reset broken irq detection when installing new handler */
desc->irq_count = 0;
desc->irqs_unhandled = 0;
--
1.5.6
--
Uwe Kleine-König, Software Engineer
Digi International GmbH Branch Breisach, Küferstrasse 8, 79206 Breisach, Germany
Tax: 315/5781/0242 / VAT: DE153662976 / Reg. Amtsgericht Dortmund HRB 13962
next reply other threads:[~2008-06-25 13:11 UTC|newest]
Thread overview: 111+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-06-25 13:11 Uwe Kleine-König [this message]
2008-07-02 9:17 ` [PATCH] handle failure of irqchip->set_type in setup_irq Uwe Kleine-König
2008-07-02 9:49 ` Andrew Morton
2008-07-02 10:09 ` Uwe Kleine-König
2008-07-04 10:46 ` [PATCH v2] " Uwe Kleine-König
2008-07-04 17:17 ` Andrew Morton
2008-07-04 18:43 ` Uwe Kleine-König
2008-07-04 19:08 ` Andrew Morton
2008-07-09 13:13 ` Uwe Kleine-König
2008-07-09 21:52 ` Andrew Morton
2008-07-10 8:23 ` Uwe Kleine-König
2008-07-10 8:28 ` Andrew Morton
[not found] ` <20080704111540.ddffd241.akpm@linux-foundation.org>
[not found] ` <alpine.LFD.1.10.0807041147450.2815@woody.linux-foundation.org>
2008-07-04 20:02 ` the printk problem Linus Torvalds
2008-07-04 20:02 ` Linus Torvalds
2008-07-04 20:27 ` Andrew Morton
2008-07-04 20:27 ` Andrew Morton
2008-07-04 20:41 ` Linus Torvalds
2008-07-04 20:41 ` Linus Torvalds
2008-07-04 20:42 ` Matthew Wilcox
2008-07-04 20:42 ` Matthew Wilcox
2008-07-04 22:01 ` Andrew Morton
2008-07-04 22:01 ` Andrew Morton
2008-07-04 22:01 ` Andrew Morton
2008-07-05 2:03 ` Matthew Wilcox
2008-07-05 2:03 ` Matthew Wilcox
2008-07-05 2:03 ` Matthew Wilcox
2008-07-22 10:05 ` [PATCH] Make u64 long long on all architectures (was: the printk problem) Andrew Morton
2008-07-22 10:05 ` Andrew Morton
2008-07-22 10:05 ` [PATCH] Make u64 long long on all architectures (was: the Andrew Morton
2008-07-22 10:36 ` [PATCH] Make u64 long long on all architectures (was: the printk problem) Michael Ellerman
2008-07-22 10:36 ` Michael Ellerman
2008-07-22 10:36 ` [PATCH] Make u64 long long on all architectures (was: the Michael Ellerman
2008-07-22 10:53 ` [PATCH] Make u64 long long on all architectures (was: the printk problem) Andrew Morton
2008-07-22 10:53 ` Andrew Morton
2008-07-22 10:53 ` [PATCH] Make u64 long long on all architectures (was: the Andrew Morton
2008-07-22 11:36 ` [PATCH] Make u64 long long on all architectures (was: the printk problem) Benjamin Herrenschmidt
2008-07-22 11:36 ` Benjamin Herrenschmidt
2008-07-22 11:36 ` [PATCH] Make u64 long long on all architectures (was: the Benjamin Herrenschmidt
2008-07-22 11:35 ` [PATCH] Make u64 long long on all architectures (was: the printk problem) Benjamin Herrenschmidt
2008-07-22 11:35 ` Benjamin Herrenschmidt
2008-07-22 11:35 ` [PATCH] Make u64 long long on all architectures (was: the Benjamin Herrenschmidt
2008-07-05 10:20 ` the printk problem Denys Vlasenko
2008-07-05 10:20 ` Denys Vlasenko
2008-07-05 10:20 ` Denys Vlasenko
2008-07-05 11:33 ` Jan Engelhardt
2008-07-05 11:33 ` Jan Engelhardt
2008-07-05 11:33 ` Jan Engelhardt
2008-07-04 22:58 ` Benjamin Herrenschmidt
2008-07-04 22:58 ` Benjamin Herrenschmidt
2008-07-04 20:36 ` Matthew Wilcox
2008-07-04 20:36 ` Matthew Wilcox
2008-07-08 1:44 ` Kyle McMartin
2008-07-08 1:44 ` Kyle McMartin
2008-07-04 23:00 ` Benjamin Herrenschmidt
2008-07-04 23:00 ` Benjamin Herrenschmidt
2008-07-04 23:25 ` Linus Torvalds
2008-07-04 23:25 ` Linus Torvalds
2008-07-05 22:32 ` Linus Torvalds
2008-07-05 22:32 ` Linus Torvalds
2008-07-05 22:57 ` Arjan van de Ven
2008-07-05 22:57 ` Arjan van de Ven
2008-07-06 5:27 ` Ingo Molnar
2008-07-06 5:27 ` Ingo Molnar
2008-07-06 5:37 ` Linus Torvalds
2008-07-06 5:37 ` Linus Torvalds
2008-07-06 5:37 ` Linus Torvalds
2008-07-06 5:53 ` Ingo Molnar
2008-07-06 5:53 ` Ingo Molnar
2008-07-06 5:53 ` Ingo Molnar
2008-07-06 6:13 ` Ingo Molnar
2008-07-06 6:13 ` Ingo Molnar
2008-07-06 6:13 ` Ingo Molnar
2008-07-07 1:14 ` Benjamin Herrenschmidt
2008-07-07 1:14 ` Benjamin Herrenschmidt
2008-07-07 3:26 ` Stephen Rothwell
2008-07-07 3:28 ` Michael Ellerman
2008-07-07 4:59 ` Stephen Rothwell
2008-07-07 3:43 ` Benjamin Herrenschmidt
2008-07-05 12:52 ` Vegard Nossum
2008-07-05 12:52 ` Vegard Nossum
2008-07-05 12:52 ` Vegard Nossum
2008-07-05 13:24 ` Jan Engelhardt
2008-07-05 13:24 ` Jan Engelhardt
2008-07-05 13:24 ` Jan Engelhardt
2008-07-05 13:50 ` Vegard Nossum
2008-07-05 13:50 ` Vegard Nossum
2008-07-05 13:50 ` Vegard Nossum
2008-07-05 14:07 ` Jan Engelhardt
2008-07-05 14:07 ` Jan Engelhardt
2008-07-05 14:07 ` Jan Engelhardt
2008-07-05 17:56 ` Linus Torvalds
2008-07-05 17:56 ` Linus Torvalds
2008-07-05 17:56 ` Linus Torvalds
2008-07-05 18:40 ` Jan Engelhardt
2008-07-05 18:40 ` Jan Engelhardt
2008-07-05 18:40 ` Jan Engelhardt
2008-07-05 18:44 ` Linus Torvalds
2008-07-05 18:44 ` Linus Torvalds
2008-07-05 18:44 ` Linus Torvalds
2008-07-05 18:41 ` Vegard Nossum
2008-07-05 18:41 ` Vegard Nossum
2008-07-05 18:41 ` Vegard Nossum
2008-07-05 18:52 ` Matthew Wilcox
2008-07-05 18:52 ` Matthew Wilcox
2008-07-05 18:52 ` Matthew Wilcox
2008-07-06 0:02 ` Pekka Enberg
2008-07-06 0:02 ` Pekka Enberg
2008-07-06 0:02 ` Pekka Enberg
2008-07-06 5:17 ` Randy Dunlap
2008-07-06 5:17 ` Randy Dunlap
2008-07-06 5:17 ` Randy Dunlap
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080625131101.GA6205@digi.com \
--to=uwe.kleine-koenig@digi.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.