From: Pavel Roskin <proski@gnu.org>
To: Jouni Malinen <j@w1.fi>, John W Linville <linville@tuxdriver.com>,
linux-wireless@vger.kernel.org
Subject: [PATCH 2/5] hostap: fix sparse warnings
Date: Fri, 27 Jun 2008 16:19:58 -0400 [thread overview]
Message-ID: <20080627201958.18603.74186.stgit@dv.roinet.com> (raw)
In-Reply-To: <20080627201952.18603.98308.stgit@dv.roinet.com>
Rewrite AID calculation in handle_pspoll() to avoid truncating bits.
Make hostap_80211_header_parse() static, don't export it. Avoid
shadowing variables.
Signed-off-by: Pavel Roskin <proski@gnu.org>
---
drivers/net/wireless/hostap/hostap_80211_rx.c | 6 +++---
drivers/net/wireless/hostap/hostap_ap.c | 2 +-
drivers/net/wireless/hostap/hostap_cs.c | 8 ++++----
drivers/net/wireless/hostap/hostap_hw.c | 10 +++++-----
drivers/net/wireless/hostap/hostap_main.c | 5 ++---
5 files changed, 15 insertions(+), 16 deletions(-)
diff --git a/drivers/net/wireless/hostap/hostap_80211_rx.c b/drivers/net/wireless/hostap/hostap_80211_rx.c
index 47884c3..020f450 100644
--- a/drivers/net/wireless/hostap/hostap_80211_rx.c
+++ b/drivers/net/wireless/hostap/hostap_80211_rx.c
@@ -64,7 +64,7 @@ int prism2_rx_80211(struct net_device *dev, struct sk_buff *skb,
int hdrlen, phdrlen, head_need, tail_need;
u16 fc;
int prism_header, ret;
- struct ieee80211_hdr_4addr *hdr;
+ struct ieee80211_hdr_4addr *fhdr;
iface = netdev_priv(dev);
local = iface->local;
@@ -83,8 +83,8 @@ int prism2_rx_80211(struct net_device *dev, struct sk_buff *skb,
phdrlen = 0;
}
- hdr = (struct ieee80211_hdr_4addr *) skb->data;
- fc = le16_to_cpu(hdr->frame_ctl);
+ fhdr = (struct ieee80211_hdr_4addr *) skb->data;
+ fc = le16_to_cpu(fhdr->frame_ctl);
if (type == PRISM2_RX_MGMT && (fc & IEEE80211_FCTL_VERS)) {
printk(KERN_DEBUG "%s: dropped management frame with header "
diff --git a/drivers/net/wireless/hostap/hostap_ap.c b/drivers/net/wireless/hostap/hostap_ap.c
index 06b23df..af3d4ef 100644
--- a/drivers/net/wireless/hostap/hostap_ap.c
+++ b/drivers/net/wireless/hostap/hostap_ap.c
@@ -1930,7 +1930,7 @@ static void handle_pspoll(local_info_t *local,
PDEBUG(DEBUG_PS, " PSPOLL and AID[15:14] not set\n");
return;
}
- aid &= ~BIT(15) & ~BIT(14);
+ aid &= ~(BIT(15) | BIT(14));
if (aid == 0 || aid > MAX_AID_TABLE_SIZE) {
PDEBUG(DEBUG_PS, " invalid aid=%d\n", aid);
return;
diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c
index ed4317a..80039a0 100644
--- a/drivers/net/wireless/hostap/hostap_cs.c
+++ b/drivers/net/wireless/hostap/hostap_cs.c
@@ -533,10 +533,10 @@ static void prism2_detach(struct pcmcia_device *link)
do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
#define CFG_CHECK2(fn, retf) \
-do { int ret = (retf); \
-if (ret != 0) { \
- PDEBUG(DEBUG_EXTRA, "CardServices(" #fn ") returned %d\n", ret); \
- cs_error(link, fn, ret); \
+do { int _ret = (retf); \
+if (_ret != 0) { \
+ PDEBUG(DEBUG_EXTRA, "CardServices(" #fn ") returned %d\n", _ret); \
+ cs_error(link, fn, _ret); \
goto next_entry; \
} \
} while (0)
diff --git a/drivers/net/wireless/hostap/hostap_hw.c b/drivers/net/wireless/hostap/hostap_hw.c
index cdf90c4..936f52e 100644
--- a/drivers/net/wireless/hostap/hostap_hw.c
+++ b/drivers/net/wireless/hostap/hostap_hw.c
@@ -2835,7 +2835,7 @@ static void hostap_passive_scan(unsigned long data)
{
local_info_t *local = (local_info_t *) data;
struct net_device *dev = local->dev;
- u16 channel;
+ u16 chan;
if (local->passive_scan_interval <= 0)
return;
@@ -2872,11 +2872,11 @@ static void hostap_passive_scan(unsigned long data)
printk(KERN_DEBUG "%s: passive scan channel %d\n",
dev->name, local->passive_scan_channel);
- channel = local->passive_scan_channel;
+ chan = local->passive_scan_channel;
local->passive_scan_state = PASSIVE_SCAN_WAIT;
local->passive_scan_timer.expires = jiffies + HZ / 10;
} else {
- channel = local->channel;
+ chan = local->channel;
local->passive_scan_state = PASSIVE_SCAN_LISTEN;
local->passive_scan_timer.expires = jiffies +
local->passive_scan_interval * HZ;
@@ -2884,9 +2884,9 @@ static void hostap_passive_scan(unsigned long data)
if (hfa384x_cmd_callback(dev, HFA384X_CMDCODE_TEST |
(HFA384X_TEST_CHANGE_CHANNEL << 8),
- channel, NULL, 0))
+ chan, NULL, 0))
printk(KERN_ERR "%s: passive scan channel set %d "
- "failed\n", dev->name, channel);
+ "failed\n", dev->name, chan);
add_timer(&local->passive_scan_timer);
}
diff --git a/drivers/net/wireless/hostap/hostap_main.c b/drivers/net/wireless/hostap/hostap_main.c
index f7aec93..a38e85f 100644
--- a/drivers/net/wireless/hostap/hostap_main.c
+++ b/drivers/net/wireless/hostap/hostap_main.c
@@ -594,7 +594,8 @@ void hostap_dump_tx_header(const char *name, const struct hfa384x_tx_frame *tx)
}
-int hostap_80211_header_parse(const struct sk_buff *skb, unsigned char *haddr)
+static int hostap_80211_header_parse(const struct sk_buff *skb,
+ unsigned char *haddr)
{
struct hostap_interface *iface = netdev_priv(skb->dev);
local_info_t *local = iface->local;
@@ -857,7 +858,6 @@ const struct header_ops hostap_80211_ops = {
.rebuild = eth_rebuild_header,
.cache = eth_header_cache,
.cache_update = eth_header_cache_update,
-
.parse = hostap_80211_header_parse,
};
EXPORT_SYMBOL(hostap_80211_ops);
@@ -1150,7 +1150,6 @@ EXPORT_SYMBOL(hostap_set_roaming);
EXPORT_SYMBOL(hostap_set_auth_algs);
EXPORT_SYMBOL(hostap_dump_rx_header);
EXPORT_SYMBOL(hostap_dump_tx_header);
-EXPORT_SYMBOL(hostap_80211_header_parse);
EXPORT_SYMBOL(hostap_80211_get_hdrlen);
EXPORT_SYMBOL(hostap_get_stats);
EXPORT_SYMBOL(hostap_setup_dev);
next prev parent reply other threads:[~2008-06-27 20:20 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-06-27 20:19 [PATCH 1/5] hostap: don't report useless WDS frames by default Pavel Roskin
2008-06-27 20:19 ` Pavel Roskin [this message]
2008-06-27 20:20 ` [PATCH 3/5] hostap: don't skip any headers in hostap_80211_header_parse() Pavel Roskin
2008-06-27 20:20 ` [PATCH 4/5] hostap: add radiotap support in monitor mode Pavel Roskin
2008-06-27 20:20 ` [PATCH 5/5] hostap: use radiotap headers by default Pavel Roskin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080627201958.18603.74186.stgit@dv.roinet.com \
--to=proski@gnu.org \
--cc=j@w1.fi \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.