From: Pavel Roskin <proski@gnu.org>
To: Jouni Malinen <j@w1.fi>, John W Linville <linville@tuxdriver.com>,
linux-wireless@vger.kernel.org
Subject: [PATCH 4/5] hostap: add radiotap support in monitor mode
Date: Fri, 27 Jun 2008 16:20:10 -0400 [thread overview]
Message-ID: <20080627202010.18603.9323.stgit@dv.roinet.com> (raw)
In-Reply-To: <20080627201952.18603.98308.stgit@dv.roinet.com>
Provide MAC time, rate, channel, signal and noise.
Signed-off-by: Pavel Roskin <proski@gnu.org>
---
drivers/net/wireless/hostap/hostap_80211_rx.c | 21 +++++++++++++++++++++
drivers/net/wireless/hostap/hostap_ioctl.c | 5 ++++-
drivers/net/wireless/hostap/hostap_wlan.h | 14 +++++++++++++-
3 files changed, 38 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/hostap/hostap_80211_rx.c b/drivers/net/wireless/hostap/hostap_80211_rx.c
index 020f450..f106bc1 100644
--- a/drivers/net/wireless/hostap/hostap_80211_rx.c
+++ b/drivers/net/wireless/hostap/hostap_80211_rx.c
@@ -78,6 +78,9 @@ int prism2_rx_80211(struct net_device *dev, struct sk_buff *skb,
prism_header = 2;
phdrlen = sizeof(struct linux_wlan_ng_cap_hdr);
}
+ } else if (dev->type == ARPHRD_IEEE80211_RADIOTAP) {
+ prism_header = 3;
+ phdrlen = sizeof(struct hostap_radiotap_rx);
} else {
prism_header = 0;
phdrlen = 0;
@@ -165,6 +168,24 @@ hdr->f.status = s; hdr->f.len = l; hdr->f.data = d
hdr->ssi_noise = htonl(rx_stats->noise);
hdr->preamble = htonl(0); /* unknown */
hdr->encoding = htonl(1); /* cck */
+ } else if (prism_header == 3) {
+ struct hostap_radiotap_rx *hdr;
+ hdr = (struct hostap_radiotap_rx *)skb_push(skb, phdrlen);
+ memset(hdr, 0, phdrlen);
+ hdr->hdr.it_len = cpu_to_le16(phdrlen);
+ hdr->hdr.it_present =
+ cpu_to_le32((1 << IEEE80211_RADIOTAP_TSFT) |
+ (1 << IEEE80211_RADIOTAP_CHANNEL) |
+ (1 << IEEE80211_RADIOTAP_RATE) |
+ (1 << IEEE80211_RADIOTAP_DBM_ANTSIGNAL) |
+ (1 << IEEE80211_RADIOTAP_DBM_ANTNOISE));
+ hdr->tsft = cpu_to_le64(rx_stats->mac_time);
+ hdr->chan_freq = cpu_to_le16(freq_list[local->channel - 1]);
+ hdr->chan_flags = cpu_to_le16(IEEE80211_CHAN_CCK |
+ IEEE80211_CHAN_2GHZ);
+ hdr->rate = rx_stats->rate / 5;
+ hdr->dbm_antsignal = rx_stats->signal;
+ hdr->dbm_antnoise = rx_stats->noise;
}
ret = skb->len - phdrlen;
diff --git a/drivers/net/wireless/hostap/hostap_ioctl.c b/drivers/net/wireless/hostap/hostap_ioctl.c
index ed52d98..3f8b1d7 100644
--- a/drivers/net/wireless/hostap/hostap_ioctl.c
+++ b/drivers/net/wireless/hostap/hostap_ioctl.c
@@ -897,6 +897,8 @@ static void hostap_monitor_set_type(local_info_t *local)
if (local->monitor_type == PRISM2_MONITOR_PRISM ||
local->monitor_type == PRISM2_MONITOR_CAPHDR) {
dev->type = ARPHRD_IEEE80211_PRISM;
+ } else if (local->monitor_type == PRISM2_MONITOR_RADIOTAP) {
+ dev->type = ARPHRD_IEEE80211_RADIOTAP;
} else {
dev->type = ARPHRD_IEEE80211;
}
@@ -2520,7 +2522,8 @@ static int prism2_ioctl_priv_prism2_param(struct net_device *dev,
case PRISM2_PARAM_MONITOR_TYPE:
if (value != PRISM2_MONITOR_80211 &&
value != PRISM2_MONITOR_CAPHDR &&
- value != PRISM2_MONITOR_PRISM) {
+ value != PRISM2_MONITOR_PRISM &&
+ value != PRISM2_MONITOR_RADIOTAP) {
ret = -EINVAL;
break;
}
diff --git a/drivers/net/wireless/hostap/hostap_wlan.h b/drivers/net/wireless/hostap/hostap_wlan.h
index 15445bc..ffdf487 100644
--- a/drivers/net/wireless/hostap/hostap_wlan.h
+++ b/drivers/net/wireless/hostap/hostap_wlan.h
@@ -5,6 +5,7 @@
#include <linux/netdevice.h>
#include <linux/mutex.h>
#include <net/iw_handler.h>
+#include <net/ieee80211_radiotap.h>
#include "hostap_config.h"
#include "hostap_common.h"
@@ -55,6 +56,17 @@ struct linux_wlan_ng_cap_hdr {
__be32 encoding;
} __attribute__ ((packed));
+struct hostap_radiotap_rx {
+ struct ieee80211_radiotap_header hdr;
+ __le64 tsft;
+ u8 rate;
+ u8 padding;
+ __le16 chan_freq;
+ __le16 chan_flags;
+ s8 dbm_antsignal;
+ s8 dbm_antnoise;
+} __attribute__ ((packed));
+
#define LWNG_CAP_DID_BASE (4 | (1 << 6)) /* section 4, group 1 */
#define LWNG_CAPHDR_VERSION 0x80211001
@@ -734,7 +746,7 @@ struct local_info {
unsigned long scan_timestamp; /* Time started to scan */
enum {
PRISM2_MONITOR_80211 = 0, PRISM2_MONITOR_PRISM = 1,
- PRISM2_MONITOR_CAPHDR = 2
+ PRISM2_MONITOR_CAPHDR = 2, PRISM2_MONITOR_RADIOTAP = 3
} monitor_type;
int monitor_allow_fcserr;
next prev parent reply other threads:[~2008-06-27 20:20 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-06-27 20:19 [PATCH 1/5] hostap: don't report useless WDS frames by default Pavel Roskin
2008-06-27 20:19 ` [PATCH 2/5] hostap: fix sparse warnings Pavel Roskin
2008-06-27 20:20 ` [PATCH 3/5] hostap: don't skip any headers in hostap_80211_header_parse() Pavel Roskin
2008-06-27 20:20 ` Pavel Roskin [this message]
2008-06-27 20:20 ` [PATCH 5/5] hostap: use radiotap headers by default Pavel Roskin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080627202010.18603.9323.stgit@dv.roinet.com \
--to=proski@gnu.org \
--cc=j@w1.fi \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.