2.6.26-rc2 WARNING from usb-serial, and then my gps is dead

All of lore.kernel.org
 help / color / mirror / Atom feed

* 2.6.26-rc2 WARNING from usb-serial, and then my gps is dead
@ 2008-06-22 18:22 Helge Hafting
  2008-06-22 18:42 ` Greg KH
  0 siblings, 1 reply; 7+ messages in thread
From: Helge Hafting @ 2008-06-22 18:22 UTC (permalink / raw)
  To: linux-kernel, linux-usb

This is what I got:
------------[ cut here ]------------
WARNING: at drivers/usb/serial/usb-serial.c:306 serial_write+0x62/0x89 
[usbserial]()
Modules linked in: pl2303 usbserial sbs sbshc coretemp piix pcmcia 
ata_piix iTCO_wdt ata_generic bay hci_usb intel_agp
Pid: 10, comm: events/1 Tainted: G        W 2.6.26-rc2-hh1 #1

Call Trace:
  [<ffffffff80236b54>] warn_on_slowpath+0x51/0x7a
  [<ffffffff8022c207>] __wake_up+0x38/0x4f
  [<ffffffff8024565c>] __queue_work+0x23/0x33
  [<ffffffff802456c8>] queue_work+0x37/0x40
  [<ffffffffa0045fa3>] :pl2303:pl2303_write+0xf2/0x101
  [<ffffffffa003c368>] :usbserial:serial_write+0x62/0x89
  [<ffffffff803a8e81>] tty_put_char+0x2b/0x2d
  [<ffffffff803ad3ca>] echo_char+0x47/0x60
  [<ffffffff803ade97>] n_tty_receive_buf+0x2b4/0xd76
  [<ffffffff8020a87e>] __switch_to+0xa2/0x396
  [<ffffffff8023028d>] hrtick_set+0x88/0xf6
  [<ffffffff80590b44>] thread_return+0x70/0xb4
  [<ffffffff8023f013>] lock_timer_base+0x26/0x4c
  [<ffffffff803a9abd>] flush_to_ldisc+0xf8/0x185
  [<ffffffff803a99c5>] flush_to_ldisc+0x0/0x185
  [<ffffffff8024520b>] run_workqueue+0x80/0x112
  [<ffffffff80245afe>] worker_thread+0xd9/0xe8
  [<ffffffff80248380>] autoremove_wake_function+0x0/0x2e
  [<ffffffff80245a25>] worker_thread+0x0/0xe8
  [<ffffffff80248264>] kthread+0x47/0x73
  [<ffffffff802318c1>] schedule_tail+0x28/0x5d
  [<ffffffff8020cf88>] child_rip+0xa/0x12
  [<ffffffff8024821d>] kthread+0x0/0x73
  [<ffffffff8020cf7e>] child_rip+0x0/0x12

---[ end trace 656e180042992f9e ]---
I looked at the dmesg log because I have had lots of trouble with my gps 
lately. I first suspected the cable, but then I saw this.

After this, I have to restart gpsd, and perhaps replug the cable to get
things going again. Until it happens again. This is a 64-bit dualcore 
laptop.

Helge Hafting

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: 2.6.26-rc2 WARNING from usb-serial, and then my gps is dead
  2008-06-22 18:22 2.6.26-rc2 WARNING from usb-serial, and then my gps is dead Helge Hafting
@ 2008-06-22 18:42 ` Greg KH
  2008-06-23  4:01   ` Andrew Morton
  2008-06-25 11:30   ` Helge Hafting
  0 siblings, 2 replies; 7+ messages in thread
From: Greg KH @ 2008-06-22 18:42 UTC (permalink / raw)
  To: Helge Hafting; +Cc: linux-kernel, linux-usb

On Sun, Jun 22, 2008 at 08:22:03PM +0200, Helge Hafting wrote:
> This is what I got:
> ------------[ cut here ]------------
> WARNING: at drivers/usb/serial/usb-serial.c:306 serial_write+0x62/0x89 
> [usbserial]()
> Modules linked in: pl2303 usbserial sbs sbshc coretemp piix pcmcia ata_piix 
> iTCO_wdt ata_generic bay hci_usb intel_agp
> Pid: 10, comm: events/1 Tainted: G        W 2.6.26-rc2-hh1 #1
>
> Call Trace:
>  [<ffffffff80236b54>] warn_on_slowpath+0x51/0x7a
>  [<ffffffff8022c207>] __wake_up+0x38/0x4f
>  [<ffffffff8024565c>] __queue_work+0x23/0x33
>  [<ffffffff802456c8>] queue_work+0x37/0x40
>  [<ffffffffa0045fa3>] :pl2303:pl2303_write+0xf2/0x101
>  [<ffffffffa003c368>] :usbserial:serial_write+0x62/0x89
>  [<ffffffff803a8e81>] tty_put_char+0x2b/0x2d
>  [<ffffffff803ad3ca>] echo_char+0x47/0x60
>  [<ffffffff803ade97>] n_tty_receive_buf+0x2b4/0xd76
>  [<ffffffff8020a87e>] __switch_to+0xa2/0x396
>  [<ffffffff8023028d>] hrtick_set+0x88/0xf6
>  [<ffffffff80590b44>] thread_return+0x70/0xb4
>  [<ffffffff8023f013>] lock_timer_base+0x26/0x4c
>  [<ffffffff803a9abd>] flush_to_ldisc+0xf8/0x185
>  [<ffffffff803a99c5>] flush_to_ldisc+0x0/0x185
>  [<ffffffff8024520b>] run_workqueue+0x80/0x112
>  [<ffffffff80245afe>] worker_thread+0xd9/0xe8
>  [<ffffffff80248380>] autoremove_wake_function+0x0/0x2e
>  [<ffffffff80245a25>] worker_thread+0x0/0xe8
>  [<ffffffff80248264>] kthread+0x47/0x73
>  [<ffffffff802318c1>] schedule_tail+0x28/0x5d
>  [<ffffffff8020cf88>] child_rip+0xa/0x12
>  [<ffffffff8024821d>] kthread+0x0/0x73
>  [<ffffffff8020cf7e>] child_rip+0x0/0x12
>
> ---[ end trace 656e180042992f9e ]---
> I looked at the dmesg log because I have had lots of trouble with my gps 
> lately. I first suspected the cable, but then I saw this.
>
> After this, I have to restart gpsd, and perhaps replug the cable to get
> things going again. Until it happens again. This is a 64-bit dualcore 
> laptop.

Ick, that's not nice.

Can you enable debugging for the usb-serial core:
	echo 1 > /sys/module/usbserial/parameters/debug

and then run whatever program you were running that causes this warning
and then send us the kernel log?

thanks,

greg k-h

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: 2.6.26-rc2 WARNING from usb-serial, and then my gps is dead
  2008-06-22 18:42 ` Greg KH
@ 2008-06-23  4:01   ` Andrew Morton
  2008-06-25 11:00     ` Helge Hafting
  2008-06-25 11:30   ` Helge Hafting
  1 sibling, 1 reply; 7+ messages in thread
From: Andrew Morton @ 2008-06-23  4:01 UTC (permalink / raw)
  To: Greg KH; +Cc: Helge Hafting, linux-kernel, linux-usb

On Sun, 22 Jun 2008 11:42:53 -0700 Greg KH <greg@kroah.com> wrote:

> On Sun, Jun 22, 2008 at 08:22:03PM +0200, Helge Hafting wrote:
> > This is what I got:
> > ------------[ cut here ]------------
> > WARNING: at drivers/usb/serial/usb-serial.c:306 serial_write+0x62/0x89 
> > [usbserial]()
> > Modules linked in: pl2303 usbserial sbs sbshc coretemp piix pcmcia ata_piix 
> > iTCO_wdt ata_generic bay hci_usb intel_agp
> > Pid: 10, comm: events/1 Tainted: G        W 2.6.26-rc2-hh1 #1
> >
> > Call Trace:
> >  [<ffffffff80236b54>] warn_on_slowpath+0x51/0x7a
> >  [<ffffffff8022c207>] __wake_up+0x38/0x4f
> >  [<ffffffff8024565c>] __queue_work+0x23/0x33
> >  [<ffffffff802456c8>] queue_work+0x37/0x40
> >  [<ffffffffa0045fa3>] :pl2303:pl2303_write+0xf2/0x101
> >  [<ffffffffa003c368>] :usbserial:serial_write+0x62/0x89
> >  [<ffffffff803a8e81>] tty_put_char+0x2b/0x2d
> >  [<ffffffff803ad3ca>] echo_char+0x47/0x60
> >  [<ffffffff803ade97>] n_tty_receive_buf+0x2b4/0xd76
> >  [<ffffffff8020a87e>] __switch_to+0xa2/0x396
> >  [<ffffffff8023028d>] hrtick_set+0x88/0xf6
> >  [<ffffffff80590b44>] thread_return+0x70/0xb4
> >  [<ffffffff8023f013>] lock_timer_base+0x26/0x4c
> >  [<ffffffff803a9abd>] flush_to_ldisc+0xf8/0x185
> >  [<ffffffff803a99c5>] flush_to_ldisc+0x0/0x185
> >  [<ffffffff8024520b>] run_workqueue+0x80/0x112
> >  [<ffffffff80245afe>] worker_thread+0xd9/0xe8
> >  [<ffffffff80248380>] autoremove_wake_function+0x0/0x2e
> >  [<ffffffff80245a25>] worker_thread+0x0/0xe8
> >  [<ffffffff80248264>] kthread+0x47/0x73
> >  [<ffffffff802318c1>] schedule_tail+0x28/0x5d
> >  [<ffffffff8020cf88>] child_rip+0xa/0x12
> >  [<ffffffff8024821d>] kthread+0x0/0x73
> >  [<ffffffff8020cf7e>] child_rip+0x0/0x12
> >
> > ---[ end trace 656e180042992f9e ]---
> > I looked at the dmesg log because I have had lots of trouble with my gps 
> > lately. I first suspected the cable, but then I saw this.
> >
> > After this, I have to restart gpsd, and perhaps replug the cable to get
> > things going again. Until it happens again. This is a 64-bit dualcore 
> > laptop.
> 
> Ick, that's not nice.
> 
> Can you enable debugging for the usb-serial core:
> 	echo 1 > /sys/module/usbserial/parameters/debug
> 
> and then run whatever program you were running that causes this warning
> and then send us the kernel log?
> 

Also, lots of things have been fixed since 2.6.26-rc2 - there might be
benefit in retesting 2.6.26-rc7.

And can you tell us whether this is new behaviour?  Was 2.6.25 OK?

Thanks.

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: 2.6.26-rc2 WARNING from usb-serial, and then my gps is dead
  2008-06-23  4:01   ` Andrew Morton
@ 2008-06-25 11:00     ` Helge Hafting
  2008-06-26  5:39       ` Greg KH
  0 siblings, 1 reply; 7+ messages in thread
From: Helge Hafting @ 2008-06-25 11:00 UTC (permalink / raw)
  To: Andrew Morton; +Cc: Greg KH, linux-kernel, linux-usb

Andrew Morton wrote:
> On Sun, 22 Jun 2008 11:42:53 -0700 Greg KH <greg@kroah.com> wrote:
> 
>> On Sun, Jun 22, 2008 at 08:22:03PM +0200, Helge Hafting wrote:
>>> This is what I got:
>>> ------------[ cut here ]------------
>>> WARNING: at drivers/usb/serial/usb-serial.c:306 serial_write+0x62/0x89 
>>> [usbserial]()
>>> Modules linked in: pl2303 usbserial sbs sbshc coretemp piix pcmcia ata_piix 
>>> iTCO_wdt ata_generic bay hci_usb intel_agp
>>> Pid: 10, comm: events/1 Tainted: G        W 2.6.26-rc2-hh1 #1
>>>
>>> Call Trace:
>>>  [<ffffffff80236b54>] warn_on_slowpath+0x51/0x7a
>>>  [<ffffffff8022c207>] __wake_up+0x38/0x4f
>>>  [<ffffffff8024565c>] __queue_work+0x23/0x33
>>>  [<ffffffff802456c8>] queue_work+0x37/0x40
>>>  [<ffffffffa0045fa3>] :pl2303:pl2303_write+0xf2/0x101
>>>  [<ffffffffa003c368>] :usbserial:serial_write+0x62/0x89
>>>  [<ffffffff803a8e81>] tty_put_char+0x2b/0x2d
>>>  [<ffffffff803ad3ca>] echo_char+0x47/0x60
>>>  [<ffffffff803ade97>] n_tty_receive_buf+0x2b4/0xd76
>>>  [<ffffffff8020a87e>] __switch_to+0xa2/0x396
>>>  [<ffffffff8023028d>] hrtick_set+0x88/0xf6
>>>  [<ffffffff80590b44>] thread_return+0x70/0xb4
>>>  [<ffffffff8023f013>] lock_timer_base+0x26/0x4c
>>>  [<ffffffff803a9abd>] flush_to_ldisc+0xf8/0x185
>>>  [<ffffffff803a99c5>] flush_to_ldisc+0x0/0x185
>>>  [<ffffffff8024520b>] run_workqueue+0x80/0x112
>>>  [<ffffffff80245afe>] worker_thread+0xd9/0xe8
>>>  [<ffffffff80248380>] autoremove_wake_function+0x0/0x2e
>>>  [<ffffffff80245a25>] worker_thread+0x0/0xe8
>>>  [<ffffffff80248264>] kthread+0x47/0x73
>>>  [<ffffffff802318c1>] schedule_tail+0x28/0x5d
>>>  [<ffffffff8020cf88>] child_rip+0xa/0x12
>>>  [<ffffffff8024821d>] kthread+0x0/0x73
>>>  [<ffffffff8020cf7e>] child_rip+0x0/0x12
>>>
>>> ---[ end trace 656e180042992f9e ]---
>>> I looked at the dmesg log because I have had lots of trouble with my gps 
>>> lately. I first suspected the cable, but then I saw this.
>>>
>>> After this, I have to restart gpsd, and perhaps replug the cable to get
>>> things going again. Until it happens again. This is a 64-bit dualcore 
>>> laptop.
>> Ick, that's not nice.
>>
>> Can you enable debugging for the usb-serial core:
>> 	echo 1 > /sys/module/usbserial/parameters/debug

Sorry for taking some time, I've been struggling with the init system.
I now see that the problem still is in 2.6.26-rc8, I will do that
debugging thing next.

>> and then run whatever program you were running that causes this warning
>> and then send us the kernel log?

I run "udev" that starts "gpsd" when I plug in a gps. The gps
is then connected to /dev/ttyUSB0. I then run
"gpxlogger" that simply contact gpsd and prints coordinates to stdout.
I also run "xgps" that contact gpsd in order to show some info about
the gps satellites in use. All software from debian testing.

The problem is triggered by bending the USB cable - likely a cable 
fault. Sometimes I merely get a plain USB device disconnect. (This also
aborts my gps logging as the gps tend to reconnect to /dev/ttyUSB1 
instead of /dev/ttyUSB0, but I guess that is a userland issue, not a 
kernel problem. Or is this a race condition?)


>>
> 
> Also, lots of things have been fixed since 2.6.26-rc2 - there might be
> benefit in retesting 2.6.26-rc7.
> 
> And can you tell us whether this is new behaviour?  Was 2.6.25 OK?

I did not see it with 2.6.25, although the cable may have been OK at 
that time. I can test 2.6.25 after getting some USB debug output.


2.6.26-rc8 dmesg output, if it may help. I have only one pl2303 device.
Still, it reconnects to ttyUSB1 before detaching from ttyUSB0 ???


hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0004
ehci_hcd 0000:00:1d.7: GetStatus port 2 status 001803 POWER sig=j CSC 
CONNECT
hub 2-0:1.0: port 2, status 0501, change 0001, 480 Mb/s
hub 2-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: port 2 full speed --> companion
ehci_hcd 0000:00:1d.7: GetStatus port 2 status 003801 POWER OWNER sig=j 
CONNECT
hub 2-0:1.0: port 2 not reset yet, waiting 50ms
usb usb5: wakeup_rh (auto-start)
ehci_hcd 0000:00:1d.7: GetStatus port 2 status 003002 POWER OWNER 
sig=se0 CSC
hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0004
uhci_hcd 0000:00:1d.0: port 2 portsc 0093,00
hub 5-0:1.0: port 2, status 0101, change 0001, 12 Mb/s
hub 5-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101
usb 5-2: new full speed USB device using uhci_hcd and address 2
usb 5-2: default language 0x0409
usb 5-2: uevent
usb 5-2: usb_probe_device
usb 5-2: configuration #1 chosen from 1 choice
usb 5-2: adding 5-2:1.0 (config #1, interface 0)
usb 5-2:1.0: uevent
drivers/usb/core/inode.c: creating file '002'
usb 5-2: New USB device found, idVendor=067b, idProduct=2303
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-2: Product: USB-Serial Controller
usb 5-2: Manufacturer: Prolific Technology Inc.
hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0004
usbcore: registered new interface driver usbserial
usbserial: USB Serial support registered for generic
usbserial_generic 3-2:1.2: usb_probe_interface
usbserial_generic 3-2:1.2: usb_probe_interface - got id
usbserial_generic 7-1.2:1.0: usb_probe_interface
usbserial_generic 7-1.2:1.0: usb_probe_interface - got id
usbserial_generic 5-2:1.0: usb_probe_interface
usbserial_generic 5-2:1.0: usb_probe_interface - got id
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial Driver core
usbserial: USB Serial support registered for pl2303
pl2303 5-2:1.0: usb_probe_interface
pl2303 5-2:1.0: usb_probe_interface - got id
pl2303 5-2:1.0: pl2303 converter detected
usb 5-2: pl2303 converter now attached to ttyUSB0
usbcore: registered new interface driver pl2303
pl2303: Prolific PL2303 USB to serial adaptor driver
uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 19 us
------------[ cut here ]------------
WARNING: at drivers/usb/serial/usb-serial.c:319 
serial_write_room+0x4b/0x60 [usbserial]()
Modules linked in: pl2303 usbserial pcmcia bay intel_agp hci_usb
Pid: 7, comm: events/0 Not tainted 2.6.26-rc8-hh1 #1

Call Trace:
  [<ffffffff80232789>] warn_on_slowpath+0x51/0x8c
  [<ffffffff8022b11a>] check_preempt_wakeup+0xab/0xfa
  [<ffffffff8022a526>] try_to_wake_up+0x108/0x119
  [<ffffffff8022ecce>] hrtick_set+0x8b/0x10a
  [<ffffffff80229494>] __wake_up_common+0x46/0x75
  [<ffffffff8032e741>] __next_cpu+0x19/0x26
  [<ffffffffa001a54c>] :usbserial:serial_write_room+0x4b/0x60
  [<ffffffff8039b178>] opost+0x12/0x1c5
  [<ffffffff8039c6ea>] n_tty_receive_buf+0x2d3/0xda2
  [<ffffffff80331f0c>] rb_insert_color+0x66/0xe2
  [<ffffffff802470f3>] hrtimer_start+0x100/0x122
  [<ffffffff8020a6a1>] __switch_to+0xa0/0x37a
  [<ffffffff8022ece4>] hrtick_set+0xa1/0x10a
  [<ffffffff803977e7>] flush_to_ldisc+0x10e/0x1bf
  [<ffffffff803976d9>] flush_to_ldisc+0x0/0x1bf
  [<ffffffff802411e8>] run_workqueue+0x81/0x10d
  [<ffffffff8024134c>] worker_thread+0xd8/0xe7
  [<ffffffff80244638>] autoremove_wake_function+0x0/0x2e
  [<ffffffff80241274>] worker_thread+0x0/0xe7
  [<ffffffff8024433b>] kthread+0x47/0x73
  [<ffffffff802304a7>] schedule_tail+0x27/0x5c
  [<ffffffff8020cf68>] child_rip+0xa/0x12
  [<ffffffff802442f4>] kthread+0x0/0x73
  [<ffffffff8020cf5e>] child_rip+0x0/0x12

---[ end trace 34089ea06d99be00 ]---
------------[ cut here ]------------
WARNING: at drivers/usb/serial/usb-serial.c:306 serial_write+0x6c/0x89 
[usbserial]()
Modules linked in: pl2303 usbserial pcmcia bay intel_agp hci_usb
Pid: 7, comm: events/0 Tainted: G        W 2.6.26-rc8-hh1 #1

Call Trace:
  [<ffffffff80232789>] warn_on_slowpath+0x51/0x8c
  [<ffffffff8022b11a>] check_preempt_wakeup+0xab/0xfa
  [<ffffffff8022a526>] try_to_wake_up+0x108/0x119
  [<ffffffff8022ecce>] hrtick_set+0x8b/0x10a
  [<ffffffff80229494>] __wake_up_common+0x46/0x75
  [<ffffffffa001a5cd>] :usbserial:serial_write+0x6c/0x89
  [<ffffffff80396c3f>] tty_put_char+0x2b/0x2d
  [<ffffffff8039b317>] opost+0x1b1/0x1c5
  [<ffffffff8039c6ea>] n_tty_receive_buf+0x2d3/0xda2
  [<ffffffff80331f0c>] rb_insert_color+0x66/0xe2
  [<ffffffff802470f3>] hrtimer_start+0x100/0x122
  [<ffffffff8020a6a1>] __switch_to+0xa0/0x37a
  [<ffffffff8022ece4>] hrtick_set+0xa1/0x10a
  [<ffffffff803977e7>] flush_to_ldisc+0x10e/0x1bf
  [<ffffffff803976d9>] flush_to_ldisc+0x0/0x1bf
  [<ffffffff802411e8>] run_workqueue+0x81/0x10d
  [<ffffffff8024134c>] worker_thread+0xd8/0xe7
  [<ffffffff80244638>] autoremove_wake_function+0x0/0x2e
  [<ffffffff80241274>] worker_thread+0x0/0xe7
  [<ffffffff8024433b>] kthread+0x47/0x73
  [<ffffffff802304a7>] schedule_tail+0x27/0x5c
  [<ffffffff8020cf68>] child_rip+0xa/0x12
  [<ffffffff802442f4>] kthread+0x0/0x73
  [<ffffffff8020cf5e>] child_rip+0x0/0x12

---[ end trace 34089ea06d99be00 ]---
------------[ cut here ]------------

WARNING: at drivers/usb/serial/usb-serial.c:319 
serial_write_room+0x4b/0x60 [usbserial]()
Modules linked in: pl2303 usbserial pcmcia bay intel_agp hci_usb
Pid: 7, comm: events/0 Tainted: G        W 2.6.26-rc8-hh1 #1

Call Trace:
  [<ffffffff80232789>] warn_on_slowpath+0x51/0x8c
  [<ffffffff80229b98>] __wake_up+0x38/0x4f
  [<ffffffff802417ad>] __queue_work+0x23/0x33
  [<ffffffff80241837>] queue_work+0x47/0x50
  [<ffffffffa0023699>] :pl2303:pl2303_write+0xf2/0xff
  [<ffffffffa001a54c>] :usbserial:serial_write_room+0x4b/0x60
  [<ffffffff8039b178>] opost+0x12/0x1c5
  [<ffffffff8039c6ea>] n_tty_receive_buf+0x2d3/0xda2
  [<ffffffff80331f0c>] rb_insert_color+0x66/0xe2
  [<ffffffff802470f3>] hrtimer_start+0x100/0x122
  [<ffffffff8020a6a1>] __switch_to+0xa0/0x37a
  [<ffffffff8022ece4>] hrtick_set+0xa1/0x10a
  [<ffffffff803977e7>] flush_to_ldisc+0x10e/0x1bf
  [<ffffffff803976d9>] flush_to_ldisc+0x0/0x1bf
  [<ffffffff802411e8>] run_workqueue+0x81/0x10d
  [<ffffffff8024134c>] worker_thread+0xd8/0xe7
  [<ffffffff80244638>] autoremove_wake_function+0x0/0x2e
  [<ffffffff80241274>] worker_thread+0x0/0xe7
  [<ffffffff8024433b>] kthread+0x47/0x73
  [<ffffffff802304a7>] schedule_tail+0x27/0x5c
  [<ffffffff8020cf68>] child_rip+0xa/0x12
  [<ffffffff802442f4>] kthread+0x0/0x73
  [<ffffffff8020cf5e>] child_rip+0x0/0x12

---[ end trace 34089ea06d99be00 ]---
------------[ cut here ]------------
WARNING: at drivers/usb/serial/usb-serial.c:306 serial_write+0x6c/0x89 
[usbserial]()
Modules linked in: pl2303 usbserial pcmcia bay intel_agp hci_usb
Pid: 7, comm: events/0 Tainted: G        W 2.6.26-rc8-hh1 #1

Call Trace:
  [<ffffffff80232789>] warn_on_slowpath+0x51/0x8c
  [<ffffffff80229b98>] __wake_up+0x38/0x4f
  [<ffffffff802417ad>] __queue_work+0x23/0x33
  [<ffffffff80241837>] queue_work+0x47/0x50
  [<ffffffffa0023699>] :pl2303:pl2303_write+0xf2/0xff
  [<ffffffffa001a5cd>] :usbserial:serial_write+0x6c/0x89
  [<ffffffff80396c3f>] tty_put_char+0x2b/0x2d
  [<ffffffff8039b317>] opost+0x1b1/0x1c5
  [<ffffffff8039c6ea>] n_tty_receive_buf+0x2d3/0xda2
  [<ffffffff80331f0c>] rb_insert_color+0x66/0xe2
  [<ffffffff802470f3>] hrtimer_start+0x100/0x122
  [<ffffffff8020a6a1>] __switch_to+0xa0/0x37a
  [<ffffffff8022ece4>] hrtick_set+0xa1/0x10a
  [<ffffffff803977e7>] flush_to_ldisc+0x10e/0x1bf
  [<ffffffff803976d9>] flush_to_ldisc+0x0/0x1bf
  [<ffffffff802411e8>] run_workqueue+0x81/0x10d
  [<ffffffff8024134c>] worker_thread+0xd8/0xe7
  [<ffffffff80244638>] autoremove_wake_function+0x0/0x2e
  [<ffffffff80241274>] worker_thread+0x0/0xe7
  [<ffffffff8024433b>] kthread+0x47/0x73
  [<ffffffff802304a7>] schedule_tail+0x27/0x5c
  [<ffffffff8020cf68>] child_rip+0xa/0x12
  [<ffffffff802442f4>] kthread+0x0/0x73
  [<ffffffff8020cf5e>] child_rip+0x0/0x12

---[ end trace 34089ea06d99be00 ]---
------------[ cut here ]------------
WARNING: at drivers/usb/serial/usb-serial.c:319 
serial_write_room+0x4b/0x60 [usbserial]()
Modules linked in: pl2303 usbserial pcmcia bay intel_agp hci_usb
Pid: 7, comm: events/0 Tainted: G        W 2.6.26-rc8-hh1 #1

Call Trace:
  [<ffffffff80232789>] warn_on_slowpath+0x51/0x8c
  [<ffffffffa00233eb>] :pl2303:pl2303_send+0x1b7/0x206
  [<ffffffffa0023699>] :pl2303:pl2303_write+0xf2/0xff
  [<ffffffffa001a54c>] :usbserial:serial_write_room+0x4b/0x60
  [<ffffffff8039b178>] opost+0x12/0x1c5
  [<ffffffff8039c6ea>] n_tty_receive_buf+0x2d3/0xda2
  [<ffffffff80331f0c>] rb_insert_color+0x66/0xe2
  [<ffffffff802470f3>] hrtimer_start+0x100/0x122
  [<ffffffff8020a6a1>] __switch_to+0xa0/0x37a
  [<ffffffff8022ece4>] hrtick_set+0xa1/0x10a
  [<ffffffff803977e7>] flush_to_ldisc+0x10e/0x1bf
  [<ffffffff803976d9>] flush_to_ldisc+0x0/0x1bf
  [<ffffffff802411e8>] run_workqueue+0x81/0x10d
  [<ffffffff8024134c>] worker_thread+0xd8/0xe7
  [<ffffffff80244638>] autoremove_wake_function+0x0/0x2e
  [<ffffffff80241274>] worker_thread+0x0/0xe7
  [<ffffffff8024433b>] kthread+0x47/0x73
  [<ffffffff802304a7>] schedule_tail+0x27/0x5c
  [<ffffffff8020cf68>] child_rip+0xa/0x12
  [<ffffffff802442f4>] kthread+0x0/0x73
  [<ffffffff8020cf5e>] child_rip+0x0/0x12

---[ end trace 34089ea06d99be00 ]---
------------[ cut here ]------------
WARNING: at drivers/usb/serial/usb-serial.c:306 serial_write+0x6c/0x89 
[usbserial]()
Modules linked in: pl2303 usbserial pcmcia bay intel_agp hci_usb
Pid: 7, comm: events/0 Tainted: G        W 2.6.26-rc8-hh1 #1

Call Trace:
  [<ffffffff80232789>] warn_on_slowpath+0x51/0x8c
  [<ffffffffa00233eb>] :pl2303:pl2303_send+0x1b7/0x206
  [<ffffffffa0023699>] :pl2303:pl2303_write+0xf2/0xff
  [<ffffffffa001a5cd>] :usbserial:serial_write+0x6c/0x89
  [<ffffffff80396c3f>] tty_put_char+0x2b/0x2d
  [<ffffffff8039b317>] opost+0x1b1/0x1c5
  [<ffffffff8039c6ea>] n_tty_receive_buf+0x2d3/0xda2
  [<ffffffff80331f0c>] rb_insert_color+0x66/0xe2
  [<ffffffff802470f3>] hrtimer_start+0x100/0x122
  [<ffffffff8020a6a1>] __switch_to+0xa0/0x37a
  [<ffffffff8022ece4>] hrtick_set+0xa1/0x10a
  [<ffffffff803977e7>] flush_to_ldisc+0x10e/0x1bf
  [<ffffffff803976d9>] flush_to_ldisc+0x0/0x1bf
  [<ffffffff802411e8>] run_workqueue+0x81/0x10d
  [<ffffffff8024134c>] worker_thread+0xd8/0xe7
  [<ffffffff80244638>] autoremove_wake_function+0x0/0x2e
  [<ffffffff80241274>] worker_thread+0x0/0xe7
  [<ffffffff8024433b>] kthread+0x47/0x73
  [<ffffffff802304a7>] schedule_tail+0x27/0x5c
  [<ffffffff8020cf68>] child_rip+0xa/0x12
  [<ffffffff802442f4>] kthread+0x0/0x73
  [<ffffffff8020cf5e>] child_rip+0x0/0x12

---[ end trace 34089ea06d99be00 ]---
uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 19 us
uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 19 us
wlan0: RX too short data frame payload
wlan0: RX too short data frame payload
usb 5-2: uhci_result_common: failed with status 520000
usb 5-2: uhci_result_common: failed with status 440000
usb 5-2: uhci_result_common: failed with status 440000
usb 5-2: uhci_result_common: failed with status 440000
usb 5-2: uhci_result_common: failed with status 440000
usb 5-2: uhci_result_common: failed with status 440000
usb 5-2: uhci_result_common: failed with status 440000
hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0004
uhci_hcd 0000:00:1d.0: port 2 portsc 0099,00
hub 5-0:1.0: port 2 enable change, status 00000101
hub 5-0:1.0: port 2 disabled by hub (EMI?), re-enabling...
hub 5-0:1.0: port 2, status 0101, change 0002, 12 Mb/s
usb 5-2: USB disconnect, address 2
usb 5-2: unregistering device
usb 5-2: usb_disable_device nuking all URBs
uhci_hcd 0000:00:1d.0: shutdown urb ffff81007c1579c0 ep1in-intr
uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 19 us
usb 5-2: unregistering interface 5-2:1.0
pl2303 5-2:1.0: device disconnected
usb 5-2:1.0: uevent
usb 5-2: uevent
usb 5-2: new full speed USB device using uhci_hcd and address 3
usb 5-2: default language 0x0409
usb 5-2: uevent
usb 5-2: usb_probe_device
usb 5-2: configuration #1 chosen from 1 choice
usb 5-2: adding 5-2:1.0 (config #1, interface 0)
usb 5-2:1.0: uevent
usbserial_generic 5-2:1.0: usb_probe_interface
usbserial_generic 5-2:1.0: usb_probe_interface - got id
pl2303 5-2:1.0: usb_probe_interface
pl2303 5-2:1.0: usb_probe_interface - got id
pl2303 5-2:1.0: pl2303 converter detected
usb 5-2: pl2303 converter now attached to ttyUSB1
drivers/usb/core/inode.c: creating file '003'
usb 5-2: New USB device found, idVendor=067b, idProduct=2303
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-2: Product: USB-Serial Controller
usb 5-2: Manufacturer: Prolific Technology Inc.
uhci_hcd 0000:00:1d.0: reserve dev 3 ep81-INT, period 1, phase 0, 19 us
pl2303 ttyUSB0: pl2303 converter now disconnected from ttyUSB0
------------[ cut here ]------------
WARNING: at drivers/usb/serial/usb-serial.c:319 
serial_write_room+0x4b/0x60 [usbserial]()
Modules linked in: pl2303 usbserial pcmcia bay intel_agp hci_usb
Pid: 8, comm: events/1 Tainted: G        W 2.6.26-rc8-hh1 #1

Call Trace:
  [<ffffffff80232789>] warn_on_slowpath+0x51/0x8c
  [<ffffffff8021aad2>] apic_wait_icr_idle+0x16/0x1f
  [<ffffffff8022a526>] try_to_wake_up+0x108/0x119
  [<ffffffff80229494>] __wake_up_common+0x46/0x75
  [<ffffffff8032e741>] __next_cpu+0x19/0x26
  [<ffffffffa001a54c>] :usbserial:serial_write_room+0x4b/0x60
  [<ffffffff8039b178>] opost+0x12/0x1c5
  [<ffffffff8039c6ea>] n_tty_receive_buf+0x2d3/0xda2
  [<ffffffff8020a6a1>] __switch_to+0xa0/0x37a
  [<ffffffff8022ecce>] hrtick_set+0x8b/0x10a
  [<ffffffff803977e7>] flush_to_ldisc+0x10e/0x1bf
  [<ffffffff803976d9>] flush_to_ldisc+0x0/0x1bf
  [<ffffffff802411e8>] run_workqueue+0x81/0x10d
  [<ffffffff8024134c>] worker_thread+0xd8/0xe7
  [<ffffffff80244638>] autoremove_wake_function+0x0/0x2e
  [<ffffffff80241274>] worker_thread+0x0/0xe7
  [<ffffffff8024433b>] kthread+0x47/0x73
  [<ffffffff802304a7>] schedule_tail+0x27/0x5c
  [<ffffffff8020cf68>] child_rip+0xa/0x12
  [<ffffffff802442f4>] kthread+0x0/0x73
  [<ffffffff8020cf5e>] child_rip+0x0/0x12

---[ end trace 34089ea06d99be00 ]---
------------[ cut here ]------------
WARNING: at drivers/usb/serial/usb-serial.c:306 serial_write+0x6c/0x89 
[usbserial]()
Modules linked in: pl2303 usbserial pcmcia bay intel_agp hci_usb
Pid: 8, comm: events/1 Tainted: G        W 2.6.26-rc8-hh1 #1

Call Trace:
  [<ffffffff80232789>] warn_on_slowpath+0x51/0x8c
  [<ffffffff8021aad2>] apic_wait_icr_idle+0x16/0x1f
  [<ffffffff8022a526>] try_to_wake_up+0x108/0x119
  [<ffffffff80229494>] __wake_up_common+0x46/0x75
  [<ffffffffa001a5cd>] :usbserial:serial_write+0x6c/0x89
  [<ffffffff80396c3f>] tty_put_char+0x2b/0x2d
  [<ffffffff8039b317>] opost+0x1b1/0x1c5
  [<ffffffff8039c6ea>] n_tty_receive_buf+0x2d3/0xda2
  [<ffffffff8020a6a1>] __switch_to+0xa0/0x37a
  [<ffffffff8022ecce>] hrtick_set+0x8b/0x10a
  [<ffffffff803977e7>] flush_to_ldisc+0x10e/0x1bf
  [<ffffffff803976d9>] flush_to_ldisc+0x0/0x1bf
  [<ffffffff802411e8>] run_workqueue+0x81/0x10d
  [<ffffffff8024134c>] worker_thread+0xd8/0xe7
  [<ffffffff80244638>] autoremove_wake_function+0x0/0x2e
  [<ffffffff80241274>] worker_thread+0x0/0xe7
  [<ffffffff8024433b>] kthread+0x47/0x73
  [<ffffffff802304a7>] schedule_tail+0x27/0x5c
  [<ffffffff8020cf68>] child_rip+0xa/0x12
  [<ffffffff802442f4>] kthread+0x0/0x73
  [<ffffffff8020cf5e>] child_rip+0x0/0x12

---[ end trace 34089ea06d99be00 ]---
uhci_hcd 0000:00:1d.0: release dev 3 ep81-INT, period 1, phase 0, 19 us
wlan0: RX too short data frame payload

(64-bit SMP core2duo laptop, voluntary preempt. dell latitude D830)

Helge Hafting


^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: 2.6.26-rc2 WARNING from usb-serial, and then my gps is dead
  2008-06-25 11:00     ` Helge Hafting
@ 2008-06-26  5:39       ` Greg KH
  0 siblings, 0 replies; 7+ messages in thread
From: Greg KH @ 2008-06-26  5:39 UTC (permalink / raw)
  To: Helge Hafting; +Cc: Andrew Morton, linux-kernel, linux-usb

On Wed, Jun 25, 2008 at 01:00:22PM +0200, Helge Hafting wrote:

> The problem is triggered by bending the USB cable - likely a cable fault. 
> Sometimes I merely get a plain USB device disconnect. (This also
> aborts my gps logging as the gps tend to reconnect to /dev/ttyUSB1 instead 
> of /dev/ttyUSB0, but I guess that is a userland issue, not a kernel 
> problem. Or is this a race condition?)

That is because your userspace program still has ttyUSB0 open, so it
creates the next valid device, ttyUSB1.  There is no way to connect the
new device to the old one as it has no idea it should do so.

Flaky hardware connections are not nice on drivers at times, although we
should not be crashing :)

We are probably just not handling the fact that the device is still open
properly, although I thought all of those errors were long since fixed,
perhaps the tty layer changes are now showing other inadequacies of the
usb-serial core up...

Those debug logs would be most helpful in tracking this down.

thanks,

greg k-h

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: 2.6.26-rc2 WARNING from usb-serial, and then my gps is dead
  2008-06-22 18:42 ` Greg KH
  2008-06-23  4:01   ` Andrew Morton
@ 2008-06-25 11:30   ` Helge Hafting
  2008-07-02 21:18     ` Greg KH
  1 sibling, 1 reply; 7+ messages in thread
From: Helge Hafting @ 2008-06-25 11:30 UTC (permalink / raw)
  To: Greg KH; +Cc: linux-kernel, linux-usb

Greg KH wrote:
> On Sun, Jun 22, 2008 at 08:22:03PM +0200, Helge Hafting wrote:
>> This is what I got:
>> ------------[ cut here ]------------
>> WARNING: at drivers/usb/serial/usb-serial.c:306 serial_write+0x62/0x89 
>> [usbserial]()
>> Modules linked in: pl2303 usbserial sbs sbshc coretemp piix pcmcia ata_piix 
>> iTCO_wdt ata_generic bay hci_usb intel_agp
>> Pid: 10, comm: events/1 Tainted: G        W 2.6.26-rc2-hh1 #1
>>
>> Call Trace:
>>  [<ffffffff80236b54>] warn_on_slowpath+0x51/0x7a
>>  [<ffffffff8022c207>] __wake_up+0x38/0x4f
>>  [<ffffffff8024565c>] __queue_work+0x23/0x33
>>  [<ffffffff802456c8>] queue_work+0x37/0x40
>>  [<ffffffffa0045fa3>] :pl2303:pl2303_write+0xf2/0x101
>>  [<ffffffffa003c368>] :usbserial:serial_write+0x62/0x89
>>  [<ffffffff803a8e81>] tty_put_char+0x2b/0x2d
>>  [<ffffffff803ad3ca>] echo_char+0x47/0x60
>>  [<ffffffff803ade97>] n_tty_receive_buf+0x2b4/0xd76
>>  [<ffffffff8020a87e>] __switch_to+0xa2/0x396
>>  [<ffffffff8023028d>] hrtick_set+0x88/0xf6
>>  [<ffffffff80590b44>] thread_return+0x70/0xb4
>>  [<ffffffff8023f013>] lock_timer_base+0x26/0x4c
>>  [<ffffffff803a9abd>] flush_to_ldisc+0xf8/0x185
>>  [<ffffffff803a99c5>] flush_to_ldisc+0x0/0x185
>>  [<ffffffff8024520b>] run_workqueue+0x80/0x112
>>  [<ffffffff80245afe>] worker_thread+0xd9/0xe8
>>  [<ffffffff80248380>] autoremove_wake_function+0x0/0x2e
>>  [<ffffffff80245a25>] worker_thread+0x0/0xe8
>>  [<ffffffff80248264>] kthread+0x47/0x73
>>  [<ffffffff802318c1>] schedule_tail+0x28/0x5d
>>  [<ffffffff8020cf88>] child_rip+0xa/0x12
>>  [<ffffffff8024821d>] kthread+0x0/0x73
>>  [<ffffffff8020cf7e>] child_rip+0x0/0x12
>>
>> ---[ end trace 656e180042992f9e ]---
>> I looked at the dmesg log because I have had lots of trouble with my gps 
>> lately. I first suspected the cable, but then I saw this.
>>
>> After this, I have to restart gpsd, and perhaps replug the cable to get
>> things going again. Until it happens again. This is a 64-bit dualcore 
>> laptop.
> 
> Ick, that's not nice.
> 
> Can you enable debugging for the usb-serial core:
> 	echo 1 > /sys/module/usbserial/parameters/debug
> 
> and then run whatever program you were running that causes this warning
> and then send us the kernel log?
> 

USB logging sure creates lots of data.
8.4M of log bzipped into 237kB here:
http://www.aitel.hist.no/~helgehaf/usbtrouble1.log.bz2

This contains:
* Kernel log all the way from bootup (2.6.26-rc8)
* An USB incident before I turned USB logging on
* An USB incident after I turned USB logging on

Almost all of it is these two lines repeating forewer:
drivers/usb/serial/usb-serial.c: serial_chars_in_buffer = port 0
drivers/usb/serial/usb-serial.c: serial_write_room - port 0

The port numbers change a couple of times throughout the log.

Helge Hafting

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: 2.6.26-rc2 WARNING from usb-serial, and then my gps is dead
  2008-06-25 11:30   ` Helge Hafting
@ 2008-07-02 21:18     ` Greg KH
  0 siblings, 0 replies; 7+ messages in thread
From: Greg KH @ 2008-07-02 21:18 UTC (permalink / raw)
  To: Helge Hafting; +Cc: linux-kernel, linux-usb

On Wed, Jun 25, 2008 at 01:30:38PM +0200, Helge Hafting wrote:
> Greg KH wrote:
>> On Sun, Jun 22, 2008 at 08:22:03PM +0200, Helge Hafting wrote:
>>> This is what I got:
>>> ------------[ cut here ]------------
>>> WARNING: at drivers/usb/serial/usb-serial.c:306 serial_write+0x62/0x89 
>>> [usbserial]()
>>> Modules linked in: pl2303 usbserial sbs sbshc coretemp piix pcmcia 
>>> ata_piix iTCO_wdt ata_generic bay hci_usb intel_agp
>>> Pid: 10, comm: events/1 Tainted: G        W 2.6.26-rc2-hh1 #1
>>>
>>> Call Trace:
>>>  [<ffffffff80236b54>] warn_on_slowpath+0x51/0x7a
>>>  [<ffffffff8022c207>] __wake_up+0x38/0x4f
>>>  [<ffffffff8024565c>] __queue_work+0x23/0x33
>>>  [<ffffffff802456c8>] queue_work+0x37/0x40
>>>  [<ffffffffa0045fa3>] :pl2303:pl2303_write+0xf2/0x101
>>>  [<ffffffffa003c368>] :usbserial:serial_write+0x62/0x89
>>>  [<ffffffff803a8e81>] tty_put_char+0x2b/0x2d
>>>  [<ffffffff803ad3ca>] echo_char+0x47/0x60
>>>  [<ffffffff803ade97>] n_tty_receive_buf+0x2b4/0xd76
>>>  [<ffffffff8020a87e>] __switch_to+0xa2/0x396
>>>  [<ffffffff8023028d>] hrtick_set+0x88/0xf6
>>>  [<ffffffff80590b44>] thread_return+0x70/0xb4
>>>  [<ffffffff8023f013>] lock_timer_base+0x26/0x4c
>>>  [<ffffffff803a9abd>] flush_to_ldisc+0xf8/0x185
>>>  [<ffffffff803a99c5>] flush_to_ldisc+0x0/0x185
>>>  [<ffffffff8024520b>] run_workqueue+0x80/0x112
>>>  [<ffffffff80245afe>] worker_thread+0xd9/0xe8
>>>  [<ffffffff80248380>] autoremove_wake_function+0x0/0x2e
>>>  [<ffffffff80245a25>] worker_thread+0x0/0xe8
>>>  [<ffffffff80248264>] kthread+0x47/0x73
>>>  [<ffffffff802318c1>] schedule_tail+0x28/0x5d
>>>  [<ffffffff8020cf88>] child_rip+0xa/0x12
>>>  [<ffffffff8024821d>] kthread+0x0/0x73
>>>  [<ffffffff8020cf7e>] child_rip+0x0/0x12
>>>
>>> ---[ end trace 656e180042992f9e ]---
>>> I looked at the dmesg log because I have had lots of trouble with my gps 
>>> lately. I first suspected the cable, but then I saw this.
>>>
>>> After this, I have to restart gpsd, and perhaps replug the cable to get
>>> things going again. Until it happens again. This is a 64-bit dualcore 
>>> laptop.
>> Ick, that's not nice.
>> Can you enable debugging for the usb-serial core:
>> 	echo 1 > /sys/module/usbserial/parameters/debug
>> and then run whatever program you were running that causes this warning
>> and then send us the kernel log?
>
> USB logging sure creates lots of data.
> 8.4M of log bzipped into 237kB here:
> http://www.aitel.hist.no/~helgehaf/usbtrouble1.log.bz2
>
> This contains:
> * Kernel log all the way from bootup (2.6.26-rc8)
> * An USB incident before I turned USB logging on
> * An USB incident after I turned USB logging on
>
> Almost all of it is these two lines repeating forewer:
> drivers/usb/serial/usb-serial.c: serial_chars_in_buffer = port 0
> drivers/usb/serial/usb-serial.c: serial_write_room - port 0
>
> The port numbers change a couple of times throughout the log.

Ah, sorry for the delay, got sidetracked with other bugs...

In looking at this further, it's just a warning that is triggering,
nothing to really be woried about right now.  Alan Cox has done a lot of
work in this area in the tty layer rework for 2.6.27 that should keep
this race from happening in the future (something is calling write_room
on a port that was previously closed, not very nice.)

So you can safely ignore it, it should not be causing any problems, only
showing examples of a flaky connection/hardware.

thanks for your patience,

greg k-h

^ permalink raw reply	[flat|nested] 7+ messages in thread

end of thread, other threads:[~2008-07-02 21:22 UTC | newest]

Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-06-22 18:22 2.6.26-rc2 WARNING from usb-serial, and then my gps is dead Helge Hafting
2008-06-22 18:42 ` Greg KH
2008-06-23  4:01   ` Andrew Morton
2008-06-25 11:00     ` Helge Hafting
2008-06-26  5:39       ` Greg KH
2008-06-25 11:30   ` Helge Hafting
2008-07-02 21:18     ` Greg KH

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.