* FWIW: is this right
@ 2008-07-08 19:18 Justin Mattock
2008-07-09 17:52 ` Takashi Iwai
0 siblings, 1 reply; 5+ messages in thread
From: Justin Mattock @ 2008-07-08 19:18 UTC (permalink / raw)
To: alsa-devel
[-- Attachment #1: Type: text/plain, Size: 455 bytes --]
Hello; FWIW I think this is the right area for this question:
basically I have a bug filed:http://bugzilla.kernel.org/show_bug.cgi?id=10954
and am trying to fix it or find a work around.
what I'm seeing in dmesg is:
hda_intel: azx_get_response timeout, switching to polling mode: last
cmd=0x010f1c00
I can't seem to reproduce this issue, only seems to appear every 100 +/- boots.
any ideas.(attached is dmesg of the bug).
regards;
--
Justin P. Mattock
[-- Attachment #2: azx --]
[-- Type: application/octet-stream, Size: 39258 bytes --]
[ 0.000000] Linux version 2.6.26-rc8-00238-gaa1c3b2 (root@unix) (gcc version 4.2.3 (Debian 4.2.3-3)) #19 SMP Mon Jul 7 20:11:46 UTC 2008
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f0ea000 (usable)
[ 0.000000] BIOS-e820: 000000003f0ea000 - 000000003f2eb000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003f2eb000 - 000000003febe000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003febe000 - 000000003feef000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003feef000 - 000000003ff00000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] 112MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 258282) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 258282
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 258282
[ 0.000000] On node 0 totalpages: 258282
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 226 pages used for memmap
[ 0.000000] HighMem zone: 28680 pages, LIFO batch:7
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.4 present.
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: RSDP 000FE020, 0024 (r2 APPLE )
[ 0.000000] ACPI: XSDT 3FEFD1C0, 0074 (r1 APPLE Apple00 A5 1000013)
[ 0.000000] ACPI: FACP 3FEFB000, 00F4 (r3 APPLE Apple00 A5 Loki 5F)
[ 0.000000] ACPI: DSDT 3FEF0000, 48D1 (r1 APPLE MacBookP 20002 INTL 20050309)
[ 0.000000] ACPI: FACS 3FEC0000, 0040
[ 0.000000] ACPI: HPET 3FEFA000, 0038 (r1 APPLE Apple00 1 Loki 5F)
[ 0.000000] ACPI: APIC 3FEF9000, 0068 (r1 APPLE Apple00 1 Loki 5F)
[ 0.000000] ACPI: MCFG 3FEF8000, 003C (r1 APPLE Apple00 1 Loki 5F)
[ 0.000000] ACPI: ASF! 3FEF7000, 00A0 (r32 APPLE Apple00 1 Loki 5F)
[ 0.000000] ACPI: SBST 3FEF6000, 0030 (r1 APPLE Apple00 1 Loki 5F)
[ 0.000000] ACPI: ECDT 3FEF5000, 0053 (r1 APPLE Apple00 1 Loki 5F)
[ 0.000000] ACPI: SSDT 3FEEF000, 04DC (r1 APPLE CpuPm 3000 INTL 20050309)
[ 0.000000] ACPI: SSDT 3FEBD000, 064F (r1 SataRe SataPri 1000 INTL 20050309)
[ 0.000000] ACPI: SSDT 3FEBC000, 069C (r1 SataRe SataSec 1000 INTL 20050309)
[ 0.000000] ACPI: DMI detected: Apple
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:b0000000)
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 46760 bytes of per cpu data
[ 0.000000] NR_CPUS: 2, nr_cpu_ids: 2
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 256264
[ 0.000000] Kernel command line: root=/dev/sda1 ro quiet splash vga=773 selinux=1 audit=1 enforcing=1 debug pnpacpi=off pci=routeirq usbcore.autosuspend=1 nmi_watchdog=0 acpi_osi=Darwin
[ 0.000000] audit: enabled (after initialization)
[ 0.000000] ACPI: Added _OSI(Darwin)
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Detected 2161.309 MHz processor.
[ 0.010000] Console: colour dummy device 80x25
[ 0.010000] console [tty0] enabled
[ 0.010000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.010000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.010000] Memory: 1018556k/1033128k available (2631k kernel code, 13956k reserved, 1360k data, 332k init, 115624k highmem)
[ 0.010000] virtual kernel memory layout:
[ 0.010000] fixmap : 0xfff7e000 - 0xfffff000 ( 516 kB)
[ 0.010000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.010000] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 0.010000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 0.010000] .init : 0xc04eb000 - 0xc053e000 ( 332 kB)
[ 0.010000] .data : 0xc0391d49 - 0xc04e5dac (1360 kB)
[ 0.010000] .text : 0xc0100000 - 0xc0391d49 (2631 kB)
[ 0.010000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.010000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.010000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.010000] hpet clockevent registered
[ 0.159749] Calibrating delay using timer specific routine.. 4326.69 BogoMIPS (lpj=21633497)
[ 0.159798] Security Framework initialized
[ 0.159804] SELinux: Initializing.
[ 0.159817] SELinux: Starting in enforcing mode
[ 0.159823] selinux_register_security: Registering secondary module capability
[ 0.159828] Capability LSM initialized as secondary
[ 0.159852] Mount-cache hash table entries: 512
[ 0.160000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.160000] CPU: L2 cache: 4096K
[ 0.160000] CPU: Physical Processor ID: 0
[ 0.160000] CPU: Processor Core ID: 0
[ 0.160000] Intel machine check architecture supported.
[ 0.160000] Intel machine check reporting enabled on CPU#0.
[ 0.160000] using mwait in idle threads.
[ 0.160000] Checking 'hlt' instruction... OK.
[ 0.200000] ACPI: Core revision 20080321
[ 0.210000] Parsing all Control Methods:
[ 0.210000] Table [DSDT](id 0001) - 691 Objects with 79 Devices 157 Methods 29 Regions
[ 0.210000] Parsing all Control Methods:
[ 0.210000] Table [SSDT](id 0002) - 13 Objects with 0 Devices 4 Methods 0 Regions
[ 0.210000] Parsing all Control Methods:
[ 0.210000] Table [SSDT](id 0003) - 10 Objects with 3 Devices 4 Methods 0 Regions
[ 0.210000] Parsing all Control Methods:
[ 0.210000] Table [SSDT](id 0004) - 11 Objects with 3 Devices 5 Methods 0 Regions
[ 0.210000] tbxface-0598 [02] tb_load_namespace : ACPI Tables successfully acquired
[ 0.210000] evxfevnt-0091 [02] enable : Transition to ACPI mode successful
[ 0.210000] ENABLING IO-APIC IRQs
[ 0.210000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.309939] CPU0: Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz stepping 06
[ 0.310000] Booting processor 1/1 ip 6000
[ 0.320000] Initializing CPU#1
[ 0.320000] Calibrating delay using timer specific routine.. 4322.52 BogoMIPS (lpj=21612611)
[ 0.320000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.320000] CPU: L2 cache: 4096K
[ 0.320000] CPU: Physical Processor ID: 0
[ 0.320000] CPU: Processor Core ID: 1
[ 0.320000] Intel machine check architecture supported.
[ 0.320000] Intel machine check reporting enabled on CPU#1.
[ 0.470000] CPU1: Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz stepping 06
[ 0.470000] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.480000] Brought up 2 CPUs
[ 0.480000] Total of 2 processors activated (8649.22 BogoMIPS).
[ 0.480000] CPU0 attaching sched-domain:
[ 0.480000] domain 0: span 0-1
[ 0.480000] groups: 0 1
[ 0.480000] CPU1 attaching sched-domain:
[ 0.480000] domain 0: span 0-1
[ 0.480000] groups: 1 0
[ 0.480000] net_namespace: 516 bytes
[ 0.480000] Booting paravirtualized kernel on bare hardware
[ 0.480000] NET: Registered protocol family 16
[ 0.480000] No dock devices found.
[ 0.480000] EISA bus registered
[ 0.480000] ACPI: bus type pci registered
[ 0.480000] PCI: Using configuration type 1 for base access
[ 0.480000] Setting up standard PCI resources
[ 0.480000] evgpeblk-0956 [04] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9
[ 0.480000] ACPI: EC: EC description table is found, configuring boot EC
[ 0.480000] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.494242] Completing Region/Field/Buffer/Package initialization:...................................................................
[ 0.498100] Initialized 27/29 Regions 0/0 Fields 21/21 Buffers 19/19 Packages (734 nodes)
[ 0.498109] Initializing Device/Processor/Thermal objects by executing _INI methods:..
[ 0.499099] Executed 2 _INI methods requiring 0 _STA executions (examined 89 objects)
[ 0.499562] evgpeblk-1052 [03] ev_initialize_gpe_bloc: Found 7 Wake, Enabled 6 Runtime GPEs in this block
[ 0.499614] ACPI: Interpreter enabled
[ 0.499618] ACPI: (supports S0 S3 S4 S5)
[ 0.499685] ACPI: Using IOAPIC for interrupt routing
[ 0.520000] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.520000] ACPI: EC: driver started in interrupt mode
[ 0.520000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.520000] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
[ 0.520000] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
[ 0.520000] PCI: Transparent bridge - 0000:00:1e.0
[ 0.520000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.520000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[ 0.520000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.520572] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.526958] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.527550] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.555818] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.555819] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.555819] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.555819] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.555819] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.555819] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.555819] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.555819] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.555819] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.555819] pnp: PnP ACPI: disabled
[ 0.555819] SCSI subsystem initialized
[ 0.555819] libata version 3.00 loaded.
[ 0.555819] usbcore: registered new interface driver usbfs
[ 0.555819] usbcore: registered new interface driver hub
[ 0.555819] usbcore: registered new device driver usb
[ 0.555819] PCI: Using ACPI for IRQ routing
[ 0.555819] PCI: Routing PCI interrupts for all devices because "pci=routeirq" specified
[ 0.555819] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.555819] ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.555819] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 0.555819] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 0.555819] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
[ 0.555819] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 0.555819] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
[ 0.555819] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 0.555819] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 0.555819] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[ 0.555819] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
[ 0.555819] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[ 0.555819] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
[ 0.555819] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19
[ 0.555819] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.555819] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.555819] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 0.555819] ACPI: PCI Interrupt 0000:0c:03.0[A] -> GSI 19 (level, low) -> IRQ 19
[ 0.585698] NetLabel: Initializing
[ 0.585702] NetLabel: domain hash size = 128
[ 0.585706] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.585773] NetLabel: unlabeled traffic allowed by default
[ 0.585784] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.585791] hpet0: 3 64-bit timers, 14318180 Hz
[ 0.594623] Switched to high resolution mode on CPU 0
[ 0.596525] Switched to high resolution mode on CPU 1
[ 0.629533] PCI: Bridge: 0000:00:01.0
[ 0.629538] IO window: 3000-3fff
[ 0.629544] MEM window: 0x50300000-0x503fffff
[ 0.629549] PREFETCH window: 0x0000000040000000-0x0000000047ffffff
[ 0.629557] PCI: Bridge: 0000:00:1c.0
[ 0.629562] IO window: 2000-2fff
[ 0.629570] MEM window: 0x50200000-0x502fffff
[ 0.629577] PREFETCH window: 0x0000000050500000-0x00000000505fffff
[ 0.629587] PCI: Bridge: 0000:00:1c.1
[ 0.629590] IO window: disabled.
[ 0.629598] MEM window: 0x50100000-0x501fffff
[ 0.629604] PREFETCH window: disabled.
[ 0.629613] PCI: Bridge: 0000:00:1c.2
[ 0.629618] IO window: 1000-1fff
[ 0.629625] MEM window: 0x4c100000-0x500fffff
[ 0.629632] PREFETCH window: 0x0000000048000000-0x000000004bffffff
[ 0.629642] PCI: Bridge: 0000:00:1e.0
[ 0.629646] IO window: disabled.
[ 0.629653] MEM window: 0x4c000000-0x4c0fffff
[ 0.629660] PREFETCH window: disabled.
[ 0.629680] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.629689] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 0.629716] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 0.629726] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 0.629754] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
[ 0.629764] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 0.629792] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 0.629801] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 0.629818] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 0.629833] NET: Registered protocol family 2
[ 0.658340] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.658619] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.659046] TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
[ 0.659602] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.659608] TCP reno registered
[ 0.668406] NET: Registered protocol family 1
[ 0.678278] IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
[ 0.688275] Initializing RT-Tester: OK
[ 0.688275] audit: initializing netlink socket (enabled)
[ 0.688275] type=2000 audit(1215531398.660:1): initialized
[ 0.688275] highmem bounce pool size: 64 pages
[ 0.688275] Total HugeTLB memory allocated, 0
[ 0.708275] fuse init (API version 7.9)
[ 0.708275] msgmni has been set to 1763
[ 0.708275] SELinux: Registering netfilter hooks
[ 0.708275] io scheduler noop registered
[ 0.708275] io scheduler cfq registered (default)
[ 0.708275] pci 0000:01:00.0: Boot video device
[ 0.708275] vesafb: framebuffer at 0x40000000, mapped to 0xf8880000, using 1536k, total 16384k
[ 0.708275] vesafb: mode is 1024x768x8, linelength=1024, pages=18
[ 0.708275] vesafb: protected mode interface info at c000:ad0c
[ 0.708275] vesafb: pmi: set display start = c00cad94, set palette = c00cae50
[ 0.708275] vesafb: scrolling: redraw
[ 0.708275] vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
[ 0.718275] Console: switching to colour frame buffer device 128x48
[ 0.728275] fb0: VESA VGA frame buffer device
[ 0.738280] hpet_resources: 0xfed00000 is busy
[ 0.738280] loop: module loaded
[ 0.738280] Linux video capture interface: v2.00
[ 0.748279] input: Macintosh mouse button emulation as /class/input/input0
[ 0.748279] Driver 'sd' needs updating - please use bus_type methods
[ 0.748279] Driver 'sr' needs updating - please use bus_type methods
[ 0.748279] ata_piix 0000:00:1f.1: version 2.12
[ 0.748279] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[ 0.748279] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 0.748279] scsi0 : ata_piix
[ 0.748279] scsi1 : ata_piix
[ 0.748279] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x40b0 irq 14
[ 0.748279] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x40b8 irq 15
[ 0.921246] ata1.00: ATAPI: MATSHITADVD-R UJ-857D, KCV9, max UDMA/66
[ 0.961117] ata1.00: configured for UDMA/66
[ 1.169132] scsi 0:0:0:0: CD-ROM MATSHITA DVD-R UJ-857D KCV9 PQ: 0 ANSI: 5
[ 1.169132] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 1.173478] Uniform CD-ROM driver Revision: 3.20
[ 1.183938] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.191987] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 1.192019] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
[ 1.196307] ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ]
[ 1.363773] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 1.373024] scsi2 : ata_piix
[ 1.373024] scsi3 : ata_piix
[ 1.381665] ata3: SATA max UDMA/133 cmd 0x40c8 ctl 0x40e4 bmdma 0x40a0 irq 19
[ 1.385939] ata4: SATA max UDMA/133 cmd 0x40c0 ctl 0x40e0 bmdma 0x40a8 irq 19
[ 1.574777] ata3.01: ATA-8: FUJITSU MHW2120BH, 00810013, max UDMA/100
[ 1.579055] ata3.01: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.614244] ata3.01: configured for UDMA/100
[ 1.789050] scsi 2:0:1:0: Direct-Access ATA FUJITSU MHW2120B 0081 PQ: 0 ANSI: 5
[ 1.793973] sd 2:0:1:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[ 1.798515] sd 2:0:1:0: [sda] Write Protect is off
[ 1.803700] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 1.808174] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.813105] sd 2:0:1:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[ 1.817622] sd 2:0:1:0: [sda] Write Protect is off
[ 1.822096] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 1.826545] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.831082] sda: sda1 sda2 < sda5 >
[ 1.837000] sd 2:0:1:0: [sda] Attached SCSI disk
[ 1.849245] sd 2:0:1:0: Attached scsi generic sg1 type 0
[ 1.849245] usbcore: registered new interface driver usblcd
[ 1.858570] usbcore: registered new interface driver usbled
[ 1.858570] PNP: No PS/2 controller found. Probing ports directly.
[ 1.859442] i8042.c: No controller found.
[ 1.893879] mice: PS/2 mouse device common for all mice
[ 1.893879] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
[ 1.893879] EDAC MC: Ver: 2.1.0 Jul 4 2008
[ 1.921026] cpuidle: using governor ladder
[ 1.921026] cpuidle: using governor menu
[ 1.928407] usbcore: registered new interface driver hiddev
[ 1.930395] usbcore: registered new interface driver usbhid
[ 1.934851] usbhid: v2.6:USB HID core driver
[ 1.939489] Advanced Linux Sound Architecture Driver Version 1.0.16.
[ 1.939490] ALSA device list:
[ 1.948634] No soundcards found.
[ 1.957533] oprofile: using NMI interrupt.
[ 1.957533] IPVS: Registered protocols (TCP, AH, ESP)
[ 1.966955] IPVS: Connection hash table configured (size=4096, memory=32Kbytes)
[ 1.966955] IPVS: ipvs loaded.
[ 1.966955] Initializing XFRM netlink socket
[ 1.977541] NET: Registered protocol family 17
[ 1.981889] NET: Registered protocol family 15
[ 1.986122] Using IPI No-Shortcut mode
[ 1.997530] kjournald starting. Commit interval 5 seconds
[ 1.997530] EXT3-fs: mounted filesystem with ordered data mode.
[ 1.997530] VFS: Mounted root (ext3 filesystem) readonly.
[ 1.997530] Freeing unused kernel memory: 332k freed
[ 2.655042] SELinux: 8192 avtab hash slots, 240215 rules.
[ 2.805031] SELinux: 8192 avtab hash slots, 240215 rules.
[ 2.987230] SELinux: 7 users, 9 roles, 3113 types, 96 bools
[ 2.995030] SELinux: 73 classes, 240215 rules
[ 3.005533] SELinux: Completing initialization.
[ 3.005793] SELinux: Setting up existing superblocks.
[ 3.043205] SELinux: initialized (dev sda1, type ext3), uses xattr
[ 3.043205] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
[ 3.043205] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
[ 3.166651] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
[ 3.170727] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
[ 3.174768] SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
[ 3.178772] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 3.182764] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
[ 3.188772] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
[ 3.197229] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
[ 3.201401] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
[ 3.207212] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[ 3.207221] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
[ 3.207226] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
[ 3.207235] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[ 3.258009] SELinux: policy loaded with handle_unknown=deny
[ 3.261120] type=1403 audit(1215531401.130:2): policy loaded auid=4294967295 ses=4294967295
[ 4.403174] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 4.415258] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 10.688358] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 12.160201] power_supply ADP1: uevent
[ 12.168818] power_supply ADP1: No power supply yet
[ 12.173102] power_supply ADP1: power_supply_changed
[ 12.177386] ACPI: AC Adapter [ADP1] (on-line)
[ 12.181989] power_supply ADP1: power_supply_changed_work
[ 12.186298] power_supply ADP1: power_supply_update_gen_leds 1
[ 12.190524] power_supply ADP1: uevent
[ 12.194696] power_supply ADP1: POWER_SUPPLY_NAME=ADP1
[ 12.198912] power_supply ADP1: Static prop TYPE=Mains
[ 12.200588] power_supply ADP1: 1 dynamic props
[ 12.207215] power_supply ADP1: prop ONLINE=1
[ 12.232737] ACPI: SSDT 3FEB8C10, 02AE (r1 APPLE Cpu0Ist 3000 INTL 20050309)
[ 12.237161] Parsing all Control Methods:
[ 12.237451] Table [SSDT](id 001A) - 5 Objects with 0 Devices 3 Methods 0 Regions
[ 12.244448] ACPI: SSDT 3FEB8910, 02A0 (r1 APPLE Cpu0Cst 3001 INTL 20050309)
[ 12.248936] Parsing all Control Methods:
[ 12.249226] Table [SSDT](id 001B) - 1 Objects with 0 Devices 1 Methods 0 Regions
[ 12.263321] Monitor-Mwait will be used to enter C-1 state
[ 12.266634] Monitor-Mwait will be used to enter C-2 state
[ 12.271014] Monitor-Mwait will be used to enter C-3 state
[ 12.275454] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 12.279822] ACPI: ACPI0007:00 is registered as cooling_device0
[ 12.284123] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 12.289872] ACPI: SSDT 3FEB8F10, 0087 (r1 APPLE Cpu1Ist 3000 INTL 20050309)
[ 12.293551] Parsing all Control Methods:
[ 12.293551] Table [SSDT](id 0020) - 3 Objects with 0 Devices 3 Methods 0 Regions
[ 12.302823] ACPI: SSDT 3FEB7F10, 0085 (r1 APPLE Cpu1Cst 3000 INTL 20050309)
[ 12.308547] Parsing all Control Methods:
[ 12.308830] Table [SSDT](id 0021) - 1 Objects with 0 Devices 1 Methods 0 Regions
[ 12.339870] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 12.344638] ACPI: ACPI0007:01 is registered as cooling_device1
[ 12.349213] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 12.360601] input: Power Button (FF) as /class/input/input1
[ 12.412614] ACPI: Power Button (FF) [PWRF]
[ 12.419245] input: Lid Switch as /class/input/input2
[ 12.432549] ACPI: Lid Switch [LID0]
[ 12.434098] input: Power Button (CM) as /class/input/input3
[ 12.434098] Marking TSC unstable due to: TSC halts in idle.
[ 12.492415] ACPI: Power Button (CM) [PWRB]
[ 12.497036] input: Sleep Button (CM) as /class/input/input4
[ 12.553716] ACPI: Sleep Button (CM) [SLPB]
[ 12.556671] input: Video Bus as /class/input/input5
[ 12.616294] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 12.710513] USB Universal Host Controller Interface driver v3.0
[ 12.715278] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
[ 12.719994] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 12.724909] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 12.729905] SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
[ 12.734863] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 12.740604] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00004080
[ 12.745719] usb usb1: configuration #1 chosen from 1 choice
[ 12.750821] hub 1-0:1.0: USB hub found
[ 12.755807] hub 1-0:1.0: 2 ports detected
[ 12.871297] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 12.871297] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 12.876434] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 12.881565] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 12.886604] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004060
[ 12.891679] usb usb2: configuration #1 chosen from 1 choice
[ 12.896692] hub 2-0:1.0: USB hub found
[ 12.901572] hub 2-0:1.0: 2 ports detected
[ 13.026362] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 13.026362] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 13.036529] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 13.040349] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 13.050420] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004040
[ 13.053946] usb usb3: configuration #1 chosen from 1 choice
[ 13.064035] hub 3-0:1.0: USB hub found
[ 13.064148] hub 3-0:1.0: 2 ports detected
[ 13.074148] ath_hal: module license 'Proprietary' taints kernel.
[ 13.110283] ath_hal: 0.9.30.13 (AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133)
[ 13.175834] usb 1-2: new full speed USB device using uhci_hcd and address 2
[ 13.213316] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[ 13.215587] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 13.225678] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 13.229468] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 13.234489] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00004020
[ 13.239556] usb usb4: configuration #1 chosen from 1 choice
[ 13.244590] hub 4-0:1.0: USB hub found
[ 13.249466] hub 4-0:1.0: 2 ports detected
[ 13.367594] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 13.416496] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 13.484309] usb 1-2: configuration #1 chosen from 1 choice
[ 13.501130] input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input6
[ 13.545072] wlan: svn r3359
[ 13.589548] hda_codec: STAC922x, Apple subsys_id=106b1e00
[ 13.645047] ath_pci: svn r3359
[ 13.671146] input: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2
[ 13.680053] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
[ 13.681985] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 13.685455] input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input7
[ 13.701941] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 13.707361] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 13.728049] ehci_hcd 0000:00:1d.7: debug port 1
[ 13.730053] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 13.735470] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x50405400
[ 13.769575] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 13.777550] usb usb5: configuration #1 chosen from 1 choice
[ 13.787613] hub 5-0:1.0: USB hub found
[ 13.793025] hub 5-0:1.0: 8 ports detected
[ 13.880162] input: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2
[ 13.908637] ACPI: PCI Interrupt 0000:0c:03.0[A] -> GSI 19 (level, low) -> IRQ 19
[ 13.967514] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[4c004000-4c0047ff] Max Packet=[4096] IR/IT contexts=[4/8]
[ 14.014354] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 14.018100] PCI: Setting latency timer of device 0000:03:00.0 to 64
[ 14.163636] MadWifi: ath_attach: Switching rfkill capability off
[ 14.219968] ath_rate_sample: 1.2 (svn r3359)
[ 14.363325] usb 1-2: USB disconnect, address 2
[ 14.414399] MadWifi: ath_attach: Switching per-packet transmit power control off
[ 14.427667] wifi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[ 14.433955] wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
[ 14.433959] wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[ 14.440696] wifi0: turboA rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[ 14.446745] wifi0: turboG rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[ 14.448799] wifi0: H/W encryption support: WEP AES AES_CCM TKIP
[ 14.458797] wifi0: ath_announce: Use hw queue 1 for WME_AC_BE traffic
[ 14.460538] wifi0: ath_announce: Use hw queue 0 for WME_AC_BK traffic
[ 14.470537] wifi0: ath_announce: Use hw queue 2 for WME_AC_VI traffic
[ 14.476235] wifi0: ath_announce: Use hw queue 3 for WME_AC_VO traffic
[ 14.481778] wifi0: ath_announce: Use hw queue 8 for CAB traffic
[ 14.487317] wifi0: ath_announce: Use hw queue 9 for beacons
[ 14.619170] ath_pci: wifi0: Atheros 5418: mem=0x50100000, irq=17
[ 14.669122] usbcore: registered new interface driver appletouch
[ 15.102076] Clocksource tsc unstable (delta = -172771726 ns)
[ 15.340788] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0019e3fffe2ad87e]
[ 15.383891] usb 5-4: new high speed USB device using ehci_hcd and address 3
[ 15.538461] usb 5-4: configuration #1 chosen from 1 choice
[ 16.376908] usb 1-2: new full speed USB device using uhci_hcd and address 3
[ 16.567555] usb 1-2: configuration #1 chosen from 1 choice
[ 16.585792] input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input8
[ 16.608726] input: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2
[ 16.619413] appletouch: Geyser mode initialized.
[ 16.619413] input: appletouch as /class/input/input9
[ 16.658672] input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input10
[ 16.674441] input: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2
[ 16.955709] usb 3-2: new full speed USB device using uhci_hcd and address 2
[ 17.136445] usb 3-2: configuration #1 chosen from 1 choice
[ 17.156995] hiddev0: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.2-2
[ 17.436069] usb 4-1: new full speed USB device using uhci_hcd and address 2
[ 17.631688] usb 4-1: configuration #1 chosen from 1 choice
[ 17.663605] input: HID 05ac:1000 as /class/input/input11
[ 17.684368] input: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1d.3-1
[ 17.707937] input: HID 05ac:1000 as /class/input/input12
[ 17.726537] input: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1d.3-1
[ 17.736598] firmware: requesting isight.fw
[ 17.805604] usbcore: registered new interface driver isight_firmware
[ 18.163183] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 18.188272] usb 5-4: USB disconnect, address 3
[ 18.253003] applesmc: Apple MacBook Pro detected:
[ 18.257889] applesmc: - Model with accelerometer
[ 18.267141] applesmc: - Model with light sensors and backlight
[ 18.272314] applesmc: - Model with 12 temperature sensors
[ 18.334362] applesmc: device successfully initialized (0xe0, 0x00).
[ 18.339431] applesmc: device successfully initialized.
[ 18.345013] applesmc: 2 fans found.
[ 18.350828] input: applesmc as /class/input/input13
[ 18.382837] Registered led device: smc::kbd_backlight
[ 18.382837] applesmc: driver successfully loaded.
[ 18.451668] Linux agpgart interface v0.103
[ 18.546203] Symbol init_mm is marked as UNUSED, however this module is using it.
[ 18.551565] This symbol will go away in the future.
[ 18.560888] Please evalute if this is the right api to use and if it really is, submit a report the linux kernel mailinglist together with submitting your code for inclusion.
[ 18.593107] [fglrx] Maximum main memory to use for locked dma buffers: 913 MBytes.
[ 18.600842] [fglrx] ASYNCIO init succeed!
[ 18.609586] [fglrx] PAT is enabled successfully!
[ 18.615429] [fglrx] module loaded - fglrx 8.47.3 [Mar 29 2008] on minor 0
[ 18.853671] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 18.952393] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 19.012302] arp_tables: (C) 2002 David S. Miller
[ 19.089492] ieee80211_crypt: registered algorithm 'NULL'
[ 19.117700] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 19.117700] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[ 19.163629] ieee80211_crypt: registered algorithm 'TKIP'
[ 19.282145] usbcore: registered new interface driver uvcvideo
[ 19.286239] USB Video Class driver (SVN r212)
[ 19.337105] ipmi message handler version 39.2
[ 19.348757] IPMI Watchdog: driver initialized
[ 19.483082] Adding 2988048k swap on /dev/disk/by-uuid/c58cdc7c-b94b-4116-9cca-bf154269e4d8. Priority:-1 extents:1 across:2988048k
[ 19.596879] EXT3 FS on sda1, internal journal
[ 20.030292] usb 5-4: new high speed USB device using ehci_hcd and address 6
[ 20.194416] usb 5-4: configuration #1 chosen from 1 choice
[ 20.194978] uvcvideo: Found UVC 1.00 device Built-in iSight (05ac:8501)
[ 20.199004] uvcvideo: Failed to query (135) UVC control 1 (unit 0) : -32 (exp. 26).
[ 20.202928] input: Built-in iSight as /class/input/input14
[ 22.802684] appletouch: incomplete data package (first byte: 2, length: 4).
[ 24.322205] input: Pommed beeper device as /class/input/input15
[ 24.617515] Bluetooth: Core ver 2.11
[ 24.622198] NET: Registered protocol family 31
[ 24.622198] Bluetooth: HCI device and connection manager initialized
[ 24.622198] Bluetooth: HCI socket layer initialized
[ 24.683332] Bluetooth: L2CAP ver 2.9
[ 24.683332] Bluetooth: L2CAP socket layer initialized
[ 24.719659] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 24.742961] usb 4-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -84
[ 24.808727] Bluetooth: RFCOMM socket layer initialized
[ 24.808727] Bluetooth: RFCOMM TTY layer initialized
[ 24.808727] Bluetooth: RFCOMM ver 1.8
[ 25.056278] usb 4-1: USB disconnect, address 2
[ 25.363484] usb 4-1: new full speed USB device using uhci_hcd and address 3
[ 25.566060] usb 4-1: configuration #1 chosen from 1 choice
[ 25.638038] Bluetooth: HCI USB driver ver 2.9
[ 25.639694] usbcore: registered new interface driver hci_usb
[ 32.437797] CPA self-test:
[ 32.437849] 4k 0 large 224 gb 0 x 224[c0000000-f7c00000] miss 0
[ 32.453203] 4k 199680 large 29 gb 0 x 199709[c0000000-f7fff000] miss 0
[ 32.473168] 4k 199680 large 29 gb 0 x 199709[c0000000-f7fff000] miss 0
[ 32.473168] ok.
[ 36.490200] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 39.437809] [fglrx] Reserve Block - 0 offset = 0X7ffb000 length = 0X5000
[ 39.437809] [fglrx] Reserve Block - 1 offset = 0X0 length = 0X1000000
[ 39.437809] [fglrx] Reserve Block - 2 offset = 0X7fbb000 length = 0X40000
[ 39.584489] [fglrx] interrupt source 20008000 successfully enabled
[ 39.584489] [fglrx] enable ID = 0x00000008
[ 39.584489] [fglrx] Receive enable interrupt message with irqEnableMask: 20008000
[ 39.584489] [fglrx] interrupt source 10000000 successfully enabled
[ 39.584489] [fglrx] enable ID = 0x00000009
[ 39.584489] [fglrx] Receive enable interrupt message with irqEnableMask: 10000000
[ 44.883551] input: Apple Computer, Inc. Mighty Mouse as /class/input/input16
[ 127.945654] hda_intel: azx_get_response timeout, switching to polling mode: last cmd=0x010f1c00
[ 5958.190283] input: Apple Computer, Inc. Mighty Mouse as /class/input/input17
[12295.050031] input: Apple Computer, Inc. Mighty Mouse as /class/input/input18
[-- Attachment #3: Type: text/plain, Size: 160 bytes --]
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: FWIW: is this right
2008-07-08 19:18 FWIW: is this right Justin Mattock
@ 2008-07-09 17:52 ` Takashi Iwai
2008-07-09 14:31 ` Ville Syrjälä
0 siblings, 1 reply; 5+ messages in thread
From: Takashi Iwai @ 2008-07-09 17:52 UTC (permalink / raw)
To: Justin Mattock; +Cc: alsa-devel
At Tue, 8 Jul 2008 19:18:21 +0000,
Justin Mattock wrote:
>
> Hello; FWIW I think this is the right area for this question:
> basically I have a bug filed:http://bugzilla.kernel.org/show_bug.cgi?id=10954
> and am trying to fix it or find a work around.
> what I'm seeing in dmesg is:
> hda_intel: azx_get_response timeout, switching to polling mode: last
> cmd=0x010f1c00
> I can't seem to reproduce this issue, only seems to appear every 100 +/- boots.
> any ideas.(attached is dmesg of the bug).
> regards;
This is no fatal error and you can mostly ignore it...
Takashi
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: FWIW: is this right
2008-07-09 17:52 ` Takashi Iwai
@ 2008-07-09 14:31 ` Ville Syrjälä
2008-07-09 18:54 ` Takashi Iwai
0 siblings, 1 reply; 5+ messages in thread
From: Ville Syrjälä @ 2008-07-09 14:31 UTC (permalink / raw)
To: Takashi Iwai; +Cc: alsa-devel, Justin Mattock
On Wed, Jul 09, 2008 at 07:52:03PM +0200, Takashi Iwai wrote:
> At Tue, 8 Jul 2008 19:18:21 +0000,
> Justin Mattock wrote:
> >
> > Hello; FWIW I think this is the right area for this question:
> > basically I have a bug filed:http://bugzilla.kernel.org/show_bug.cgi?id=10954
> > and am trying to fix it or find a work around.
> > what I'm seeing in dmesg is:
> > hda_intel: azx_get_response timeout, switching to polling mode: last
> > cmd=0x010f1c00
> > I can't seem to reproduce this issue, only seems to appear every 100 +/- boots.
> > any ideas.(attached is dmesg of the bug).
> > regards;
>
> This is no fatal error and you can mostly ignore it...
It is fatal at least in my case. PCM playback doesn't work after getting
the error until you close all applications using the device.
--
Ville Syrjälä
syrjala@sci.fi
http://www.sci.fi/~syrjala/
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: FWIW: is this right
2008-07-09 14:31 ` Ville Syrjälä
@ 2008-07-09 18:54 ` Takashi Iwai
2008-07-09 16:59 ` Justin Mattock
0 siblings, 1 reply; 5+ messages in thread
From: Takashi Iwai @ 2008-07-09 18:54 UTC (permalink / raw)
To: Ville Syrjälä; +Cc: alsa-devel, Justin Mattock
At Wed, 9 Jul 2008 17:31:01 +0300,
Ville Syrjälä wrote:
>
> On Wed, Jul 09, 2008 at 07:52:03PM +0200, Takashi Iwai wrote:
> > At Tue, 8 Jul 2008 19:18:21 +0000,
> > Justin Mattock wrote:
> > >
> > > Hello; FWIW I think this is the right area for this question:
> > > basically I have a bug filed:http://bugzilla.kernel.org/show_bug.cgi?id=10954
> > > and am trying to fix it or find a work around.
> > > what I'm seeing in dmesg is:
> > > hda_intel: azx_get_response timeout, switching to polling mode: last
> > > cmd=0x010f1c00
> > > I can't seem to reproduce this issue, only seems to appear every 100 +/- boots.
> > > any ideas.(attached is dmesg of the bug).
> > > regards;
> >
> > This is no fatal error and you can mostly ignore it...
>
> It is fatal at least in my case. PCM playback doesn't work after getting
> the error until you close all applications using the device.
It alone can't be a fatal error. Either you must have more error
messages or a different error is hidden behind.
Takashi
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: FWIW: is this right
2008-07-09 18:54 ` Takashi Iwai
@ 2008-07-09 16:59 ` Justin Mattock
0 siblings, 0 replies; 5+ messages in thread
From: Justin Mattock @ 2008-07-09 16:59 UTC (permalink / raw)
To: Takashi Iwai; +Cc: alsa-devel
On Wed, Jul 9, 2008 at 6:54 PM, Takashi Iwai <tiwai@suse.de> wrote:
> At Wed, 9 Jul 2008 17:31:01 +0300,
> Ville Syrjälä wrote:
>>
>> On Wed, Jul 09, 2008 at 07:52:03PM +0200, Takashi Iwai wrote:
>> > At Tue, 8 Jul 2008 19:18:21 +0000,
>> > Justin Mattock wrote:
>> > >
>> > > Hello; FWIW I think this is the right area for this question:
>> > > basically I have a bug filed:http://bugzilla.kernel.org/show_bug.cgi?id=10954
>> > > and am trying to fix it or find a work around.
>> > > what I'm seeing in dmesg is:
>> > > hda_intel: azx_get_response timeout, switching to polling mode: last
>> > > cmd=0x010f1c00
>> > > I can't seem to reproduce this issue, only seems to appear every 100 +/- boots.
>> > > any ideas.(attached is dmesg of the bug).
>> > > regards;
>> >
>> > This is no fatal error and you can mostly ignore it...
>>
>> It is fatal at least in my case. PCM playback doesn't work after getting
>> the error until you close all applications using the device.
>
> It alone can't be a fatal error. Either you must have more error
> messages or a different error is hidden behind.
>
>
> Takashi
>
This is interesting after removing:options snd-hda-intel position_fix=1
from /etc/modprobe.d/alsa-base I have not seen this after recompiling
my kernel loads of times
keep in mind I'm using a macbook pro: the above option was used to
help with the crackling
noise in the headphones. I'm going to watch this and see if I see this
message appears.
regards;
--
Justin P. Mattock
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2008-07-09 16:59 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-07-08 19:18 FWIW: is this right Justin Mattock
2008-07-09 17:52 ` Takashi Iwai
2008-07-09 14:31 ` Ville Syrjälä
2008-07-09 18:54 ` Takashi Iwai
2008-07-09 16:59 ` Justin Mattock
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.