[U-Boot-Users] [PATCH] I2C Monitor Chip ADT7460 support

[Stefan Roese <sr@denx.de>]

On Friday 11 July 2008, Ricardo Ribalda Delgado wrote:
> Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>

Please find some comments below (mostly nitpicking).

>  drivers/hwmon/Makefile  |    1 +
>  drivers/hwmon/adt7460.c |   81
> +++++++++++++++++++++++++++++++++++++++++++++++ drivers/hwmon/adt7460.h |  
> 49 ++++++++++++++++++++++++++++
>  include/dtt.h           |    3 +-
>  4 files changed, 133 insertions(+), 1 deletions(-)
>  create mode 100644 drivers/hwmon/adt7460.c
>  create mode 100644 drivers/hwmon/adt7460.h
>
> diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
> index 065433a..e301eaa 100644
> --- a/drivers/hwmon/Makefile
> +++ b/drivers/hwmon/Makefile
> @@ -37,6 +37,7 @@ COBJS-y += ds1775.o
>  COBJS-$(CONFIG_DTT_LM73) += lm73.o
>  COBJS-y += lm75.o
>  COBJS-y += lm81.o
> +COBJS-$(CONFIG_DTT_ADT7460) += adt7460.o
>
>  COBJS	:= $(COBJS-y)
>  SRCS	:= $(COBJS:.o=.c)
> diff --git a/drivers/hwmon/adt7460.c b/drivers/hwmon/adt7460.c
> new file mode 100644
> index 0000000..3fbd6fa
> --- /dev/null
> +++ b/drivers/hwmon/adt7460.c
> @@ -0,0 +1,81 @@
> +/*
> +    (C) Copyright 2008
> +    Ricado Ribalda-Universidad Autonoma de Madrid, ricardo.ribalda at uam.es
> +    This work has been supported by: Q-Technology  http://qtec.com/
> +
> +    This program is free software: you can redistribute it and/or modify
> +    it under the terms of the GNU General Public License as published by
> +    the Free Software Foundation, either version 2 of the License, or
> +    (at your option) any later version.
> +
> +    This program is distributed in the hope that it will be useful,
> +    but WITHOUT ANY WARRANTY; without even the implied warranty of
> +    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> +    GNU General Public License for more details.
> +
> +    You should have received a copy of the GNU General Public License
> +    along with this program.  If not, see <http://www.gnu.org/licenses/>.
> +*/
> +
> +#include <common.h>
> +
> +#include <i2c.h>
> +#include <dtt.h>
> +#include "adt7460.h"
> +
> +#define ADT7460_ADDRESS 0x2c
> +int dtt_read(int sensor, int reg)
> +{
> +	u8 dir=reg;

Codingstyle:

	u8 dir = reg;

> +	u8 data;
> +
> +	if (i2c_read(ADT7460_ADDRESS,dir,1,&data,1)==-1)

Spaces are sometimes nice too:

	if (i2c_read(ADT7460_ADDRESS, dir, 1, &data, 1) == -1)

> +		return -1;
> +
> +	if (data==ADT7460_INVALID)

Again spaces missing:

	if (data == ADT7460_INVALID)

I'll stop here with it. Please fix all this codingstyle issues in this file.

<snip>

> diff --git a/drivers/hwmon/adt7460.h b/drivers/hwmon/adt7460.h
> new file mode 100644
> index 0000000..d915d1b
> --- /dev/null
> +++ b/drivers/hwmon/adt7460.h
> @@ -0,0 +1,49 @@
> +/*
> +    (C) Copyright 2008
> +    Ricado Ribalda-Universidad Autonoma de Madrid, ricardo.ribalda at uam.es
> +    This work has been supported by: Q-Technology  http://qtec.com/
> +
> +    This program is free software: you can redistribute it and/or modify
> +    it under the terms of the GNU General Public License as published by
> +    the Free Software Foundation, either version 2 of the License, or
> +    (at your option) any later version.
> +
> +    This program is distributed in the hope that it will be useful,
> +    but WITHOUT ANY WARRANTY; without even the implied warranty of
> +    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> +    GNU General Public License for more details.
> +
> +    You should have received a copy of the GNU General Public License
> +    along with this program.  If not, see <http://www.gnu.org/licenses/>.
> +*/
> +#ifndef ADT7460
> +#define ADT7460
> +
> +
> +#define ADT7460_INVALID 128
> +
> +#define ADT7460_2_5V		0x20
> +#define ADT7460_VCCP		0x21
> +#define ADT7460_VCC		0x22
> +#define ADT7460_V5		0x23
> +#define ADT7460_V12		0x24
> +#define ADT7460_REM1_TEMP	0x25
> +#define ADT7460_LOCAL_TEMP	0x26
> +#define ADT7460_REM2_TEMP	0x27
> +#define ADT7460_TACH1L		0x28
> +#define ADT7460_TACH1H		0x29
> +#define ADT7460_TACH2L		0x2a
> +#define ADT7460_TACH2H		0x2b
> +#define ADT7460_TACH3L		0x2c
> +#define ADT7460_TACH3H		0x2d
> +#define ADT7460_TACH4L		0x2e
> +#define ADT7460_TACH4H		0x2f
> +#define ADT7460_TACH5L		0xa9
> +#define ADT7460_TACH5H		0xaa
> +#define ADT7460_TACH6L		0xab
> +#define ADT7460_TACH6H		0xac
> +#define ADT7460_REVISION	0x3f
> +#define ADT7460_CONFIG		0x40
> +
> +
> +#endif

Do you really think this header is necessary? I would prefer to move those 
defines into the C file instead and drop the header completely.

Thanks.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================