Re: [PATCH] powerpc: i2c-mpc: make speed registers configurable via FDT

[Grant Likely <grant.likely@secretlab.ca>]

On Thu, Jul 31, 2008 at 01:35:51PM -0500, Timur Tabi wrote:
> Grant Likely wrote:
> 
> > No it doesn't, it depends on the register interface to decide
> > compatibility.  Clock interface is part of that. 
> 
> I don't think so.  The interface for programming the clock registers is
> identical on all 8[356]xx parts.  The only thing that matters is what specific
> values to put in the FDR and DFSR registers to get a desired I2C bus speed.
> That answer is dependent on the actual clock input to the device, which is
> external to the device.  I wouldn't call the input frequency a property of the
> I2C device.

Okay, I accept that argument.  Make input frequency a property and be
done with it.

> > I suggested encoding
> > the clock divider directly in compatible (implicit in the SoC version),
> > but it doesn't have to be that way.  If clock freq is obtained from
> > another property or some other method then that is okay too.
> 
> I think we agree on that.

indeed.

> > There is nothing wrong with it (as long as we agree and it gets
> > documented).  I certainly don't have a problem with doing it this way.
> 
> I propose the property "clock-frequency", like this:
> 
> 		i2c@3000 {
> 			#address-cells = <1>;
> 			#size-cells = <0>;
> 			cell-index = <0>;
> 			compatible = "fsl-i2c";
> 			reg = <0x3000 0x100>;
> 			interrupts = <14 0x8>;
> 			interrupt-parent = <&ipic>;
> 			dfsrr;
> 			clock-frequency = <0xblablabla>;  <-- added by U-Boot
> 		};

I'm okay with this.

> Note that the dfsrr property already differentiates between 8xxx and 52xx, so
> maybe we don't need any other device tree changes.

The whole dfsrr property is a really bad idea, and it just replaces the
equally bad idea of an "mpc5200-clocking" property which is currently in
use.  This bit should definitely be determined via compatible.

g.