From: Andrew Morton <akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org>
To: Tony Breeds <tony-B47dsA4koDqXvyopL2yb9tBPR1lH4CV8@public.gmane.org>
Cc: Kamalesh Babulal
<kamalesh-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org>,
linuxppc-dev-mnsaURCQ41sdnm+yROfE0A@public.gmane.org,
Kernel Testers List
<kernel-testers-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
Sam Ravnborg <sam-uyr5N9Q2VtJg9hUCZPvPmw@public.gmane.org>,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Peter Oberparleiter
<peter.oberparleiter-tA70FqPdS9bQT0dZR+AlfA@public.gmane.org>
Subject: Re: [BUILD-FAILURE] 2.6.27-rc1-mm1 - allyesconfig build fails on powerpc
Date: Thu, 31 Jul 2008 23:12:06 -0700 [thread overview]
Message-ID: <20080731231206.80940fba.akpm@linux-foundation.org> (raw)
In-Reply-To: <20080801052936.GZ20457-B47dsA4koDqXvyopL2yb9tBPR1lH4CV8@public.gmane.org>
On Fri, 1 Aug 2008 15:29:36 +1000 Tony Breeds <tony-B47dsA4koDqXvyopL2yb9tBPR1lH4CV8@public.gmane.org> wrote:
> On Thu, Jul 31, 2008 at 06:13:28PM +0530, Kamalesh Babulal wrote:
> > Hi Andrew,
> >
> > make allyesconfig with 2.6.27-rc1-mm1 kernel on powerpc fails with build error
>
> <snip>
>
> Turning off GCOV "fixes" this. Not really the best solution but at
> least it narrows doen the search effort.
Thanks.
> Peter,
> Can you have a look at how this can be fixed, if at all?
>
Am not terribly happy with the state of the gcov patches. They STILL
leave thousands of dead symlinks lying around after `make mrproper' and
generally seem to muck up the kbuild system a bit, although nothing
that a bit of Sam love wouldn't fix.
Plus it breaks the build on a few architectures (branch out of range,
mainly), but that's a fairly minor thing which could even be worked
around in Kconfig (disable the offending code if gcov is enabled)
WARNING: multiple messages have this Message-ID (diff)
From: Andrew Morton <akpm@linux-foundation.org>
To: Tony Breeds <tony@bakeyournoodle.com>
Cc: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>,
linux-kernel@vger.kernel.org,
Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>,
linuxppc-dev@ozlabs.org,
Kernel Testers List <kernel-testers@vger.kernel.org>,
Sam Ravnborg <sam@ravnborg.org>
Subject: Re: [BUILD-FAILURE] 2.6.27-rc1-mm1 - allyesconfig build fails on powerpc
Date: Thu, 31 Jul 2008 23:12:06 -0700 [thread overview]
Message-ID: <20080731231206.80940fba.akpm@linux-foundation.org> (raw)
In-Reply-To: <20080801052936.GZ20457@bakeyournoodle.com>
On Fri, 1 Aug 2008 15:29:36 +1000 Tony Breeds <tony@bakeyournoodle.com> wrote:
> On Thu, Jul 31, 2008 at 06:13:28PM +0530, Kamalesh Babulal wrote:
> > Hi Andrew,
> >
> > make allyesconfig with 2.6.27-rc1-mm1 kernel on powerpc fails with build error
>
> <snip>
>
> Turning off GCOV "fixes" this. Not really the best solution but at
> least it narrows doen the search effort.
Thanks.
> Peter,
> Can you have a look at how this can be fixed, if at all?
>
Am not terribly happy with the state of the gcov patches. They STILL
leave thousands of dead symlinks lying around after `make mrproper' and
generally seem to muck up the kbuild system a bit, although nothing
that a bit of Sam love wouldn't fix.
Plus it breaks the build on a few architectures (branch out of range,
mainly), but that's a fairly minor thing which could even be worked
around in Kconfig (disable the offending code if gcov is enabled)
WARNING: multiple messages have this Message-ID (diff)
From: Andrew Morton <akpm@linux-foundation.org>
To: Tony Breeds <tony@bakeyournoodle.com>
Cc: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>,
linuxppc-dev@ozlabs.org,
Kernel Testers List <kernel-testers@vger.kernel.org>,
Sam Ravnborg <sam@ravnborg.org>,
linux-kernel@vger.kernel.org,
Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Subject: Re: [BUILD-FAILURE] 2.6.27-rc1-mm1 - allyesconfig build fails on powerpc
Date: Thu, 31 Jul 2008 23:12:06 -0700 [thread overview]
Message-ID: <20080731231206.80940fba.akpm@linux-foundation.org> (raw)
In-Reply-To: <20080801052936.GZ20457@bakeyournoodle.com>
On Fri, 1 Aug 2008 15:29:36 +1000 Tony Breeds <tony@bakeyournoodle.com> wrote:
> On Thu, Jul 31, 2008 at 06:13:28PM +0530, Kamalesh Babulal wrote:
> > Hi Andrew,
> >
> > make allyesconfig with 2.6.27-rc1-mm1 kernel on powerpc fails with build error
>
> <snip>
>
> Turning off GCOV "fixes" this. Not really the best solution but at
> least it narrows doen the search effort.
Thanks.
> Peter,
> Can you have a look at how this can be fixed, if at all?
>
Am not terribly happy with the state of the gcov patches. They STILL
leave thousands of dead symlinks lying around after `make mrproper' and
generally seem to muck up the kbuild system a bit, although nothing
that a bit of Sam love wouldn't fix.
Plus it breaks the build on a few architectures (branch out of range,
mainly), but that's a fairly minor thing which could even be worked
around in Kconfig (disable the offending code if gcov is enabled)
next prev parent reply other threads:[~2008-08-01 6:12 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-07-31 7:03 2.6.27-rc1-mm1 Andrew Morton
2008-07-31 8:10 ` 2.6.27-rc1-mm1 Balbir Singh
2008-07-31 12:23 ` 2.6.27-rc1-mm1: busyloop time-schedule Alexey Dobriyan
2008-07-31 18:20 ` 2.6.27-rc1-mm1 Randy Dunlap
[not found] ` <20080731000354.24b55d5b.akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org>
2008-07-31 12:43 ` [BUILD-FAILURE] 2.6.27-rc1-mm1 - allyesconfig build fails on powerpc Kamalesh Babulal
2008-07-31 12:43 ` Kamalesh Babulal
2008-07-31 12:43 ` Kamalesh Babulal
[not found] ` <4891B370.5040208-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org>
2008-08-01 5:29 ` Tony Breeds
2008-08-01 5:29 ` Tony Breeds
2008-08-01 5:29 ` Tony Breeds
[not found] ` <20080801052936.GZ20457-B47dsA4koDqXvyopL2yb9tBPR1lH4CV8@public.gmane.org>
2008-08-01 6:12 ` Andrew Morton [this message]
2008-08-01 6:12 ` Andrew Morton
2008-08-01 6:12 ` Andrew Morton
[not found] ` <20080731231206.80940fba.akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org>
2008-08-01 15:40 ` Peter 1 Oberparleiter
2008-08-01 15:40 ` Peter 1 Oberparleiter
2008-08-01 15:40 ` Peter 1 Oberparleiter
2008-08-01 16:45 ` Sam Ravnborg
2008-08-01 16:45 ` Sam Ravnborg
2008-08-01 16:45 ` Sam Ravnborg
2008-08-01 15:44 ` Peter 1 Oberparleiter
2008-08-01 15:44 ` Peter 1 Oberparleiter
2008-08-01 15:44 ` Peter 1 Oberparleiter
2008-08-01 16:16 ` Kamalesh Babulal
2008-08-01 16:16 ` Kamalesh Babulal
2008-08-01 16:16 ` Kamalesh Babulal
2008-08-02 9:23 ` 2.6.27-rc1-mm1: rmmod ide-cd_mod oops Mariusz Kozlowski
2008-08-02 9:23 ` Mariusz Kozlowski
[not found] ` <200808021123.57952.m.kozlowski-NWF1p15JEu3VItvQsEIGlw@public.gmane.org>
2008-08-02 16:15 ` Bartlomiej Zolnierkiewicz
2008-08-02 16:15 ` Bartlomiej Zolnierkiewicz
[not found] ` <200808021815.57573.bzolnier-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2008-08-02 23:25 ` Mariusz Kozlowski
2008-08-02 23:25 ` Mariusz Kozlowski
2008-08-03 14:41 ` Bartlomiej Zolnierkiewicz
2008-08-03 15:45 ` Mariusz Kozlowski
2008-08-02 15:17 ` 2.6.27-rc1-mm1: sparc64 BUG: using smp_processor_id() in preemptible code Mariusz Kozlowski
2008-08-02 15:17 ` Mariusz Kozlowski
2008-08-02 15:17 ` Mariusz Kozlowski
[not found] ` <200808021717.47971.m.kozlowski-NWF1p15JEu3VItvQsEIGlw@public.gmane.org>
2008-08-03 7:02 ` David Miller
2008-08-03 7:02 ` David Miller
2008-08-03 7:02 ` 2.6.27-rc1-mm1: sparc64 BUG: using smp_processor_id() in David Miller
2008-08-05 20:26 ` 2.6.27-rc1-mm1: unable to boot with gcov on x86_64 Mariusz Kozlowski
2008-08-05 20:26 ` Mariusz Kozlowski
[not found] ` <200808052226.36626.m.kozlowski-NWF1p15JEu3VItvQsEIGlw@public.gmane.org>
2008-08-05 20:29 ` Mariusz Kozlowski
2008-08-05 20:29 ` Mariusz Kozlowski
2008-08-06 7:23 ` Peter Oberparleiter
2008-08-06 7:23 ` Peter Oberparleiter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080731231206.80940fba.akpm@linux-foundation.org \
--to=akpm-de/tnxtf+jlsfhdxvbkv3wd2fqjk+8+b@public.gmane.org \
--cc=kamalesh-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org \
--cc=kernel-testers-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linuxppc-dev-mnsaURCQ41sdnm+yROfE0A@public.gmane.org \
--cc=peter.oberparleiter-tA70FqPdS9bQT0dZR+AlfA@public.gmane.org \
--cc=sam-uyr5N9Q2VtJg9hUCZPvPmw@public.gmane.org \
--cc=tony-B47dsA4koDqXvyopL2yb9tBPR1lH4CV8@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.