From: Paul Mundt <lethal@linux-sh.org>
To: Manuel Lauss <mano-nEyxjcs6f3Vin2gBucwGBecsttgLyre6@public.gmane.org>
Cc: David Brownell <david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org>,
spi-devel-general-TtF/mJH4Jtrk1uMJSBkQmQ@public.gmane.org,
linux-sh-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [RFT PATCH] SuperH HSPI controller driver.
Date: Sun, 03 Aug 2008 23:52:47 +0000 [thread overview]
Message-ID: <20080803235247.GA6682@linux-sh.org> (raw)
In-Reply-To: <20080721090744.GA16714-nEyxjcs6f3Vin2gBucwGBecsttgLyre6@public.gmane.org>
On Mon, Jul 21, 2008 at 11:07:44AM +0200, Manuel Lauss wrote:
> Here is a very simple driver for the HSPI block on many SuperH processors.
> I could only subject it to limited testings, as my sole SPI device here is
> a write-only 8bit digital poti. It seems to do the right thing as far as
> I could see on an oscilloscope.
>
> The driver doesn't do DMA and pushes/pops bytes one-at-a-time from/to fifos
> (I'm going to fix that at a later time).
>
> Please test and comment!
>
> Thanks,
> Manuel Lauss
>
> ---
>
> A simple driver for the HSPI block found on many SuperH processors.
>
> Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
I have no outstanding issues with this, though I did just break it with
the header reorg. If David is fine with it and wants to Ack it, I can
take it through my tree.
WARNING: multiple messages have this Message-ID (diff)
From: Paul Mundt <lethal-M7jkjyW5wf5g9hUCZPvPmw@public.gmane.org>
To: Manuel Lauss <mano-nEyxjcs6f3Vin2gBucwGBecsttgLyre6@public.gmane.org>
Cc: David Brownell <david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org>,
spi-devel-general-TtF/mJH4Jtrk1uMJSBkQmQ@public.gmane.org,
linux-sh-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [RFT PATCH] SuperH HSPI controller driver.
Date: Mon, 4 Aug 2008 08:52:47 +0900 [thread overview]
Message-ID: <20080803235247.GA6682@linux-sh.org> (raw)
In-Reply-To: <20080721090744.GA16714-nEyxjcs6f3Vin2gBucwGBecsttgLyre6@public.gmane.org>
On Mon, Jul 21, 2008 at 11:07:44AM +0200, Manuel Lauss wrote:
> Here is a very simple driver for the HSPI block on many SuperH processors.
> I could only subject it to limited testings, as my sole SPI device here is
> a write-only 8bit digital poti. It seems to do the right thing as far as
> I could see on an oscilloscope.
>
> The driver doesn't do DMA and pushes/pops bytes one-at-a-time from/to fifos
> (I'm going to fix that at a later time).
>
> Please test and comment!
>
> Thanks,
> Manuel Lauss
>
> ---
>
> A simple driver for the HSPI block found on many SuperH processors.
>
> Signed-off-by: Manuel Lauss <mano-nEyxjcs6f3Vin2gBucwGBecsttgLyre6@public.gmane.org>
I have no outstanding issues with this, though I did just break it with
the header reorg. If David is fine with it and wants to Ack it, I can
take it through my tree.
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
next prev parent reply other threads:[~2008-08-03 23:52 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-07-21 9:07 [RFT PATCH] SuperH HSPI controller driver Manuel Lauss
2008-07-21 12:39 ` Paul Mundt
[not found] ` <20080721123925.GC19854-M7jkjyW5wf5g9hUCZPvPmw@public.gmane.org>
2008-07-21 12:46 ` Manuel Lauss
[not found] ` <20080721090744.GA16714-nEyxjcs6f3Vin2gBucwGBecsttgLyre6@public.gmane.org>
2008-07-21 12:39 ` Paul Mundt
2008-08-03 23:52 ` Paul Mundt [this message]
2008-08-03 23:52 ` Paul Mundt
[not found] ` <20080803235247.GA6682-M7jkjyW5wf5g9hUCZPvPmw@public.gmane.org>
2008-08-03 23:57 ` Paul Mundt
2008-07-21 12:46 ` Manuel Lauss
2008-08-03 23:57 ` Paul Mundt
[not found] ` <20080803235702.GB6682-M7jkjyW5wf5g9hUCZPvPmw@public.gmane.org>
2008-08-04 5:49 ` Paul Mundt
2008-08-04 5:49 ` Paul Mundt
-- strict thread matches above, loose matches on Subject: below --
2008-07-21 9:07 Manuel Lauss
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080803235247.GA6682@linux-sh.org \
--to=lethal@linux-sh.org \
--cc=david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org \
--cc=linux-sh-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mano-nEyxjcs6f3Vin2gBucwGBecsttgLyre6@public.gmane.org \
--cc=spi-devel-general-TtF/mJH4Jtrk1uMJSBkQmQ@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.