* 2.6.27-rc3: ext4 mount problem (proc_dir_entry 'stats' already registered)
@ 2008-08-13 13:00 Ralf Hildebrandt
0 siblings, 0 replies; only message in thread
From: Ralf Hildebrandt @ 2008-08-13 13:00 UTC (permalink / raw)
To: linux-kernel
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=utf-8, Size: 33739 bytes --]
Freshly created fs using:
mkfs -E test_fs -t ext3 /dev/cciss/c0d0p8
tune2fs -O extents -E test_fs /dev/cciss/c0d0p8
then mounted via:
mount /squid-cache0
from fstab:
# <file system> <mount point> <type> <options> <dump> <pass>
/dev/cciss/c0d0p8 /squid-cache0 auto defaults,noatime,nodev,noexec,errors=panic 0 1
results in:
/dev/cciss/c0d0p8 on /squid-cache0 type ext4dev (rw,noexec,nodev,noatime,errors=panic)
in dmesg I get:
[ 5.586583] proc_dir_entry 'stats' already registered
complete dmesg:
[ 0.000000] Linux version 2.6.27-rc3 (root@proxy-cvk-1) (gcc version 4.2.4 (Debian 4.2.4-3)) #1 SMP Wed Aug 13 14:16:27 CEST 2008
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000100 - 000000000009f400 (usable)
[ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fff3000 (usable)
[ 0.000000] BIOS-e820: 000000007fff3000 - 000000007fffb000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007fffb000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
[ 0.000000] last_pfn = 0x7fff3 max_arch_pfn = 0x1000000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7010600070106, new 0x7010600070106
[ 0.000000] kernel direct mapping tables up to 38000000 @ 7000-c000
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP 000F4EE0, 0024 (r2 HP )
[ 0.000000] ACPI: XSDT 7FFF32C0, 004C (r1 HP P54 2 Ò\x04 162E)
[ 0.000000] ACPI: FACP 7FFF3340, 00F4 (r3 HP P54 2 Ò\x04 162E)
[ 0.000000] ACPI: DSDT 7FFF3440, 18CE (r1 HP DSDT 1 INTL 20030228)
[ 0.000000] ACPI: FACS 7FFF3100, 0040
[ 0.000000] ACPI: SPCR 7FFF3140, 0050 (r1 HP SPCRRBSU 1 Ò\x04 162E)
[ 0.000000] ACPI: MCFG 7FFF31C0, 003C (r1 HP ProLiant 1 0)
[ 0.000000] ACPI: APIC 7FFF3200, 00B6 (r1 HP 00000083 2 0)
[ 0.000000] ACPI: SSDT 7FFF8000, 02CD (r1 HP SSDTP 1 INTL 20030228)
[ 0.000000] 1151MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 38000000
[ 0.000000] low ram: 00000000 - 38000000
[ 0.000000] bootmap 00009000 - 00010000
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0038000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 000040a910] TEXT DATA BSS ==> [0000100000 - 000040a910]
[ 0.000000] #4 [000040b000 - 0000412000] INIT_PG_TABLE ==> [000040b000 - 0000412000]
[ 0.000000] #5 [000009f400 - 0000100000] BIOS reserved ==> [000009f400 - 0000100000]
[ 0.000000] #6 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000]
[ 0.000000] #7 [0000009000 - 0000010000] BOOTMAP ==> [0000009000 - 0000010000]
[ 0.000000] found SMP MP-table at [c00f4f60] 000f4f60
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000001 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00038000
[ 0.000000] HighMem 0x00038000 -> 0x0007fff3
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000001 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007fff3
[ 0.000000] On node 0 totalpages: 524177
[ 0.000000] free_area_init_node: node 0, pgdat c0362380, node_mem_map c1000020
[ 0.000000] DMA zone: 3966 pages, LIFO batch:0
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 292595 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x908
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec10000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 9, version 32, address 0xfec10000, GSI 24-47
[ 0.000000] ACPI: IOAPIC (id[0x0a] address[0xfec82000] gsi_base[48])
[ 0.000000] IOAPIC[2]: apic_id 10, version 32, address 0xfec82000, GSI 48-71
[ 0.000000] ACPI: IOAPIC (id[0x0b] address[0xfec82400] gsi_base[72])
[ 0.000000] IOAPIC[3]: apic_id 11, version 32, address 0xfec82400, GSI 72-95
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 4 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] mapped IOAPIC to ffff9000 (fec10000)
[ 0.000000] mapped IOAPIC to ffff8000 (fec82000)
[ 0.000000] mapped IOAPIC to ffff7000 (fec82400)
[ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000)
[ 0.000000] PERCPU: Allocating 40352 bytes of per cpu data
[ 0.000000] NR_CPUS: 4, nr_cpu_ids: 4, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520081
[ 0.000000] Kernel command line: BOOT_IMAGE=Linux ro root=6805 panic=10
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] CPU 0 irqstacks, hard=c03cd000 soft=c03c9000
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] TSC calibrated against PM_TIMER
[ 0.000000] Detected 3400.066 MHz processor.
[ 0.000999] Console: colour VGA+ 80x25
[ 0.000999] console [tty0] enabled
[ 0.000999] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000999] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000999] Memory: 2075280k/2097100k available (1827k kernel code, 20536k reserved, 737k data, 256k init, 1179596k highmem)
[ 0.000999] virtual kernel memory layout:
[ 0.000999] fixmap : 0xfff85000 - 0xfffff000 ( 488 kB)
[ 0.000999] pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
[ 0.000999] vmalloc : 0xf8800000 - 0xff9fe000 ( 113 MB)
[ 0.000999] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 0.000999] .init : 0xc0386000 - 0xc03c6000 ( 256 kB)
[ 0.000999] .data : 0xc02c8d4f - 0xc03813e8 ( 737 kB)
[ 0.000999] .text : 0xc0100000 - 0xc02c8d4f (1827 kB)
[ 0.000999] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000999] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.000999] SLUB: Genslabs=12, HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000999] Calibrating delay loop (skipped), value calculated using timer frequency.. 6800.13 BogoMIPS (lpj=3400066)
[ 0.000999] Mount-cache hash table entries: 512
[ 0.000999] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 0.000999] CPU: L2 cache: 2048K
[ 0.000999] CPU: Physical Processor ID: 0
[ 0.000999] Intel machine check architecture supported.
[ 0.000999] Intel machine check reporting enabled on CPU#0.
[ 0.000999] CPU0: Intel P4/Xeon Extended MCE MSRs (24) available
[ 0.000999] CPU0: Thermal monitoring enabled
[ 0.000999] using mwait in idle threads.
[ 0.000999] Checking 'hlt' instruction... OK.
[ 0.005999] Freeing SMP alternatives: 9k freed
[ 0.005999] ACPI: Core revision 20080609
[ 0.009998] ENABLING IO-APIC IRQs
[ 0.009998] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.020996] CPU0: Intel(R) Xeon(TM) CPU 3.40GHz stepping 03
[ 0.020996] CPU 1 irqstacks, hard=c03ce000 soft=c03ca000
[ 0.020996] Booting processor 1/6 ip 6000
[ 0.030995] Initializing CPU#1
[ 0.061990] Calibrating delay using timer specific routine.. 6799.07 BogoMIPS (lpj=3399539)
[ 0.061990] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 0.061990] CPU: L2 cache: 2048K
[ 0.061990] CPU: Physical Processor ID: 3
[ 0.061990] Intel machine check architecture supported.
[ 0.061990] Intel machine check reporting enabled on CPU#1.
[ 0.061990] CPU1: Intel P4/Xeon Extended MCE MSRs (24) available
[ 0.061990] CPU1: Thermal monitoring enabled
[ 0.061990] x86 PAT enabled: cpu 1, old 0x7010600070106, new 0x7010600070106
[ 0.091985] CPU1: Intel(R) Xeon(TM) CPU 3.40GHz stepping 03
[ 0.092985] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.093985] CPU 2 irqstacks, hard=c03cf000 soft=c03cb000
[ 0.093985] Booting processor 2/1 ip 6000
[ 0.104984] Initializing CPU#2
[ 0.104984] Calibrating delay using timer specific routine.. 6799.02 BogoMIPS (lpj=3399514)
[ 0.104984] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 0.104984] CPU: L2 cache: 2048K
[ 0.104984] CPU: Physical Processor ID: 0
[ 0.104984] Intel machine check architecture supported.
[ 0.104984] Intel machine check reporting enabled on CPU#2.
[ 0.104984] CPU2: Intel P4/Xeon Extended MCE MSRs (24) available
[ 0.104984] CPU2: Thermal monitoring enabled
[ 0.104984] x86 PAT enabled: cpu 2, old 0x7010600070106, new 0x7010600070106
[ 0.165974] CPU2: Intel(R) Xeon(TM) CPU 3.40GHz stepping 03
[ 0.166974] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.167974] CPU 3 irqstacks, hard=c03d0000 soft=c03cc000
[ 0.167974] Booting processor 3/7 ip 6000
[ 0.178972] Initializing CPU#3
[ 0.178972] Calibrating delay using timer specific routine.. 6799.09 BogoMIPS (lpj=3399547)
[ 0.178972] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 0.178972] CPU: L2 cache: 2048K
[ 0.178972] CPU: Physical Processor ID: 3
[ 0.178972] Intel machine check architecture supported.
[ 0.178972] Intel machine check reporting enabled on CPU#3.
[ 0.178972] CPU3: Intel P4/Xeon Extended MCE MSRs (24) available
[ 0.178972] CPU3: Thermal monitoring enabled
[ 0.178972] x86 PAT enabled: cpu 3, old 0x7010600070106, new 0x7010600070106
[ 0.239963] CPU3: Intel(R) Xeon(TM) CPU 3.40GHz stepping 03
[ 0.240963] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 0.241962] Brought up 4 CPUs
[ 0.241962] Total of 4 processors activated (27197.33 BogoMIPS).
[ 0.242962] net_namespace: 596 bytes
[ 0.242962] NET: Registered protocol family 16
[ 0.242962] ACPI: bus type pci registered
[ 0.243962] PCI: Found Intel Corporation E7520 Memory Controller Hub with MMCONFIG support.
[ 0.243962] PCI: Using MMCONFIG for extended config space
[ 0.243962] PCI: Using configuration type 1 for base access
[ 0.243962] PCI: HP ProLiant DL360 detected, enabling pci=bfsort.
[ 0.245962] ACPI: EC: Look up EC in DSDT
[ 0.246962] ACPI: Interpreter enabled
[ 0.246962] ACPI: (supports S0 S5)
[ 0.247962] ACPI: Using IOAPIC for interrupt routing
[ 0.250961] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.250961] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.250961] pci 0000:00:02.0: PME# disabled
[ 0.250961] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.251961] pci 0000:00:04.0: PME# disabled
[ 0.251961] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.251961] pci 0000:00:06.0: PME# disabled
[ 0.251961] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.251961] pci 0000:00:1d.7: PME# disabled
[ 0.251961] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.251961] pci 0000:00:1f.0: quirk: region 0900-097f claimed by ICH4 ACPI/GPIO/TCO
[ 0.251961] pci 0000:00:1f.0: quirk: region 0800-083f claimed by ICH4 GPIO
[ 0.252961] pci 0000:06:00.0: PXH quirk detected; SHPC device MSI disabled
[ 0.252961] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
[ 0.252961] pci 0000:06:00.0: PME# disabled
[ 0.252961] pci 0000:06:00.2: PXH quirk detected; SHPC device MSI disabled
[ 0.253961] pci 0000:06:00.2: PME# supported from D0 D3hot D3cold
[ 0.253961] pci 0000:06:00.2: PME# disabled
[ 0.254379] pci 0000:02:01.0: supports D1
[ 0.254499] pci 0000:02:02.0: PME# supported from D3hot D3cold
[ 0.254675] pci 0000:02:02.0: PME# disabled
[ 0.254960] pci 0000:02:02.1: PME# supported from D3hot D3cold
[ 0.254960] pci 0000:02:02.1: PME# disabled
[ 0.254960] pci 0000:01:03.0: supports D1
[ 0.254960] pci 0000:01:03.0: supports D2
[ 0.254960] pci 0000:01:04.2: PME# supported from D0 D3hot D3cold
[ 0.254960] pci 0000:01:04.2: PME# disabled
[ 0.254960] pci 0000:00:1e.0: transparent bridge
[ 0.254960] bus 00 -> node 0
[ 0.254960] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.255960] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IP2P._PRT]
[ 0.255960] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.ICHR._PRT]
[ 0.255960] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PTB0._PRT]
[ 0.255960] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PTB0.PCXA._PRT]
[ 0.255960] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PTB0.PCXB._PRT]
[ 0.255960] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PTA0._PRT]
[ 0.255960] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PTC0._PRT]
[ 0.258960] ACPI: PCI Interrupt Link [LNKA] (IRQs *5 7 10 11), disabled.
[ 0.258960] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 10 11) *0, disabled.
[ 0.259960] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 *7 10 11), disabled.
[ 0.259960] ACPI: PCI Interrupt Link [LNKD] (IRQs *5 7 10 11), disabled.
[ 0.260960] ACPI: PCI Interrupt Link [LNKE] (IRQs 5 7 10 11) *0, disabled.
[ 0.260960] ACPI: PCI Interrupt Link [LNKF] (IRQs *5 7 10 11), disabled.
[ 0.260960] ACPI: PCI Interrupt Link [LNKG] (IRQs *5 7 10 11), disabled.
[ 0.261959] ACPI: PCI Interrupt Link [LNKH] (IRQs *5 7 10 11), disabled.
[ 0.261959] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.261959] pnp: PnP ACPI init
[ 0.262959] ACPI: bus type pnp registered
[ 0.263959] pnp: PnP ACPI: found 9 devices
[ 0.263959] ACPI: ACPI bus type pnp unregistered
[ 0.264959] SCSI subsystem initialized
[ 0.264959] PCI: Using ACPI for IRQ routing
[ 0.268960] system 00:01: ioport range 0x408-0x40f has been reserved
[ 0.268960] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 0.268960] system 00:01: ioport range 0x700-0x71f has been reserved
[ 0.268960] system 00:01: ioport range 0x800-0x83f has been reserved
[ 0.268960] system 00:01: ioport range 0x900-0x97f has been reserved
[ 0.268960] system 00:01: ioport range 0xc80-0xc83 has been reserved
[ 0.268960] system 00:01: ioport range 0xcd4-0xcd7 has been reserved
[ 0.268960] system 00:01: ioport range 0xf50-0xf58 has been reserved
[ 0.268960] system 00:01: ioport range 0x2f8-0x2ff has been reserved
[ 0.268960] system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
[ 0.299997] pci 0000:00:02.0: PCI bridge, secondary bus 0000:0d
[ 0.299997] pci 0000:00:02.0: IO window: disabled
[ 0.299997] pci 0000:00:02.0: MEM window: disabled
[ 0.299997] pci 0000:00:02.0: PREFETCH window: disabled
[ 0.299997] pci 0000:06:00.0: PCI bridge, secondary bus 0000:07
[ 0.299997] pci 0000:06:00.0: IO window: disabled
[ 0.299997] pci 0000:06:00.0: MEM window: disabled
[ 0.299997] pci 0000:06:00.0: PREFETCH window: disabled
[ 0.299997] pci 0000:06:00.2: PCI bridge, secondary bus 0000:0a
[ 0.299997] pci 0000:06:00.2: IO window: disabled
[ 0.299997] pci 0000:06:00.2: MEM window: disabled
[ 0.299997] pci 0000:06:00.2: PREFETCH window: disabled
[ 0.299997] pci 0000:00:04.0: PCI bridge, secondary bus 0000:06
[ 0.299997] pci 0000:00:04.0: IO window: disabled
[ 0.299997] pci 0000:00:04.0: MEM window: disabled
[ 0.301001] pci 0000:00:04.0: PREFETCH window: disabled
[ 0.301037] pci 0000:00:06.0: PCI bridge, secondary bus 0000:03
[ 0.301037] pci 0000:00:06.0: IO window: disabled
[ 0.301037] pci 0000:00:06.0: MEM window: disabled
[ 0.301037] pci 0000:00:06.0: PREFETCH window: disabled
[ 0.301037] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.301037] pci 0000:00:1c.0: IO window: 0x4000-0x4fff
[ 0.301037] pci 0000:00:1c.0: MEM window: 0xfdf00000-0xfdffffff
[ 0.301037] pci 0000:00:1c.0: PREFETCH window: 0x00000088000000-0x000000880fffff
[ 0.301037] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
[ 0.301037] pci 0000:00:1e.0: IO window: 0x1000-0x3fff
[ 0.301037] pci 0000:00:1e.0: MEM window: 0xfbf00000-0xfcffffff
[ 0.301037] pci 0000:00:1e.0: PREFETCH window: 0x00000088100000-0x000000881fffff
[ 0.301037] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.301037] pci 0000:00:02.0: setting latency timer to 64
[ 0.301037] pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.301037] pci 0000:00:04.0: setting latency timer to 64
[ 0.301037] pci 0000:06:00.0: setting latency timer to 64
[ 0.301037] pci 0000:06:00.2: setting latency timer to 64
[ 0.301037] pci 0000:00:06.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.301037] pci 0000:00:06.0: setting latency timer to 64
[ 0.301996] pci 0000:00:1e.0: setting latency timer to 64
[ 0.301996] NET: Registered protocol family 2
[ 0.305000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.305000] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.305000] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.306008] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.306008] TCP reno registered
[ 0.308008] NET: Registered protocol family 1
[ 0.309936] highmem bounce pool size: 64 pages
[ 0.313515] msgmni has been set to 1751
[ 0.313684] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[ 0.314231] io scheduler noop registered
[ 0.314293] io scheduler anticipatory registered
[ 0.314324] io scheduler deadline registered
[ 0.314324] io scheduler cfq registered (default)
[ 0.314746] pcieport-driver 0000:00:02.0: setting latency timer to 64
[ 0.314746] pci_express 0000:00:02.0:pcie00: allocate port service
[ 0.315206] pci_express 0000:00:02.0:pcie01: allocate port service
[ 0.315206] pcieport-driver 0000:00:04.0: setting latency timer to 64
[ 0.315206] pci_express 0000:00:04.0:pcie00: allocate port service
[ 0.315206] pci_express 0000:00:04.0:pcie01: allocate port service
[ 0.315206] pcieport-driver 0000:00:06.0: setting latency timer to 64
[ 0.315206] pci_express 0000:00:06.0:pcie00: allocate port service
[ 0.315453] pci_express 0000:00:06.0:pcie01: allocate port service
[ 0.315453] aer 0000:00:02.0:pcie01: AER service couldn't init device: no _OSC support
[ 0.316161] aer 0000:00:04.0:pcie01: AER service couldn't init device: no _OSC support
[ 0.316161] aer 0000:00:06.0:pcie01: AER service couldn't init device: no _OSC support
[ 0.320453] Floppy drive(s): fd0 is 1.44M
[ 0.332458] FDC 0 is a National Semiconductor PC87306
[ 0.334321] Compaq SMART2 Driver (v 2.6.0)
[ 0.334321] HP CISS Driver (v 3.6.20)
[ 0.334321] cciss 0000:02:01.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
[ 0.413475] cciss0: <0x46> at PCI 0000:02:01.0 IRQ 24 using DAC
[ 0.414206] blocks= 142253280 block_size= 512
[ 0.414274] heads=255, sectors=32, cylinders=17433
[ 0.414274]
[ 0.414483] blocks= 142253280 block_size= 512
[ 0.414714] heads=255, sectors=32, cylinders=17433
[ 0.414714]
[ 0.414714] cciss/c0d0: p1 < p5 p6 p7 p8 p9 p10 >
[ 0.456955] Uniform Multi-Platform E-IDE driver
[ 0.457371] piix 0000:00:1f.1: IDE controller (0x8086:0x25a2 rev 0x02)
[ 0.457493] pci 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.457554] piix 0000:00:1f.1: not 100% native mode: will probe irqs later
[ 0.457554] ide0: BM-DMA at 0x0500-0x0507
[ 0.457554] ide1: BM-DMA at 0x0508-0x050f
[ 0.457554] Probing IDE interface ide0...
[ 0.801212] Switched to high resolution mode on CPU 3
[ 0.800307] Switched to high resolution mode on CPU 1
[ 0.801325] Switched to high resolution mode on CPU 2
[ 0.801469] Switched to high resolution mode on CPU 0
[ 1.128002] hda: DV-28E-N, ATAPI CD/DVD-ROM drive
[ 1.740311] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 1.740311] hda: UDMA/33 mode selected
[ 1.741007] Probing IDE interface ide1...
[ 2.260306] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 2.260306] ide1 at 0x170-0x177,0x376 on irq 15
[ 2.260376] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
[ 2.260376] ide_generic: I/O resource 0x1F0-0x1F7 not free.
[ 2.260376] ide_generic: I/O resource 0x170-0x177 not free.
[ 2.262974] hda: ATAPI 24X DVD-ROM drive, 256kB Cache
[ 2.262974] Uniform CD-ROM driver Revision: 3.20
[ 2.270001] Driver 'sd' needs updating - please use bus_type methods
[ 2.270001] Driver 'sr' needs updating - please use bus_type methods
[ 2.270002] PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
[ 2.272292] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.272292] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.273377] mice: PS/2 mouse device common for all mice
[ 2.273377] cpuidle: using governor ladder
[ 2.273377] cpuidle: using governor menu
[ 2.273428] TCP cubic registered
[ 2.273428] NET: Registered protocol family 17
[ 2.273428] Starting balanced_irq
[ 2.274006] Using IPI Shortcut mode
[ 2.274238] registered taskstats version 1
[ 2.325245] input: AT Translated Set 2 keyboard as /class/input/input0
[ 2.388367] kjournald starting. Commit interval 5 seconds
[ 2.388367] EXT3-fs: mounted filesystem with ordered data mode.
[ 2.388367] VFS: Mounted root (ext3 filesystem) readonly.
[ 2.388367] Freeing unused kernel memory: 256k freed
[ 2.388367] Write protecting the kernel text: 1828k
[ 2.388367] Write protecting the kernel read-only data: 592k
[ 3.427012] Real Time Clock Driver v1.12ac
[ 3.429377] Generic RTC Driver v1.07
[ 3.703006] Adding 1962456k swap on /dev/cciss/c0d0p6. Priority:-1 extents:1 across:1962456k
[ 3.723010] Adding 1962456k swap on /dev/cciss/c0d0p7. Priority:-2 extents:1 across:1962456k
[ 3.980356] EXT3 FS on cciss/c0d0p5, internal journal
[ 4.779381] tg3.c:v3.93 (May 22, 2008)
[ 4.779381] tg3 0000:02:02.0: PCI INT A -> GSI 25 (level, low) -> IRQ 25
[ 4.810377] eth0: Tigon3 [partno(349321-001) rev 2100 PHY(5704)] (PCIX:66MHz:64-bit) 10/100/1000Base-T Ethernet 00:16:35:3b:8f:8c
[ 4.810377] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] WireSpeed[1] TSOcap[0]
[ 4.810377] eth0: dma_rwctrl[769f0000] dma_mask[64-bit]
[ 4.810377] tg3 0000:02:02.1: PCI INT B -> GSI 26 (level, low) -> IRQ 26
[ 4.845131] eth1: Tigon3 [partno(349321-001) rev 2100 PHY(5704)] (PCIX:66MHz:64-bit) 10/100/1000Base-T Ethernet 00:16:35:3b:8f:8b
[ 4.845131] eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
[ 4.845131] eth1: dma_rwctrl[769f0000] dma_mask[64-bit]
[ 4.875345] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 5.559376] kjournald2 starting. Commit interval 5 seconds
[ 5.561423] EXT4 FS on cciss/c0d0p8, internal journal
[ 5.561423] EXT4-fs: mounted filesystem with ordered data mode.
[ 5.561423] EXT4-fs: delayed allocation enabled
[ 5.561423] EXT4-fs: file extents enabled
[ 5.561423] EXT4-fs: mballoc enabled
[ 5.569001] kjournald2 starting. Commit interval 5 seconds
[ 5.586583] EXT4 FS on cciss/c0d0p9, internal journal
[ 5.586583] EXT4-fs: mounted filesystem with ordered data mode.
[ 5.586583] EXT4-fs: delayed allocation enabled
[ 5.586583] EXT4-fs: file extents enabled
[ 5.586583] proc_dir_entry 'stats' already registered
[ 5.586583] Pid: 655, comm: mount Not tainted 2.6.27-rc3 #1
[ 5.587013] [<c019ea80>] proc_register+0xda/0x17d
[ 5.587115] [<c019eb85>] proc_create_data+0x62/0x9a
[ 5.587307] [<f8ad5a8f>] ext4_mb_init+0x47d/0x748 [ext4dev]
[ 5.587601] [<c0119f50>] __wake_up+0x32/0x42
[ 5.587984] [<c0123783>] printk+0x1b/0x1f
[ 5.588006] [<f8ac7d8a>] ext4_fill_super+0x1829/0x2043 [ext4dev]
[ 5.588006] [<c01de527>] snprintf+0x1f/0x23
[ 5.588006] [<c01a37bc>] disk_name+0x72/0xa6
[ 5.588006] [<c016e92f>] get_sb_bdev+0xea/0x10d
[ 5.588006] [<c0154d4c>] kstrdup+0x30/0x52
[ 5.588006] [<f8ac4690>] ext4_get_sb+0x20/0x25 [ext4dev]
[ 5.589009] [<f8ac6561>] ext4_fill_super+0x0/0x2043 [ext4dev]
[ 5.589028] [<c016e3d0>] vfs_kern_mount+0x37/0x88
[ 5.589028] [<c016e468>] do_kern_mount+0x31/0xbc
[ 5.589028] [<c0181aaa>] do_new_mount+0x69/0x8e
[ 5.589028] [<c0181c31>] do_mount+0x162/0x1aa
[ 5.589028] [<c017fb5e>] copy_mount_options+0x28/0x115
[ 5.589028] [<c01741f5>] getname+0x8c/0x9b
[ 5.589028] [<c0181cf0>] sys_mount+0x77/0xb7
[ 5.589028] [<c0103a02>] syscall_call+0x7/0xb
[ 5.589028] =======================
[ 5.589028] proc_dir_entry 'max_to_scan' already registered
[ 5.589028] Pid: 655, comm: mount Not tainted 2.6.27-rc3 #1
[ 5.589028] [<c019ea80>] proc_register+0xda/0x17d
[ 5.590032] [<c019eb85>] proc_create_data+0x62/0x9a
[ 5.590032] [<f8ad5ab7>] ext4_mb_init+0x4a5/0x748 [ext4dev]
[ 5.590032] [<c0119f50>] __wake_up+0x32/0x42
[ 5.590032] [<c0123783>] printk+0x1b/0x1f
[ 5.590032] [<f8ac7d8a>] ext4_fill_super+0x1829/0x2043 [ext4dev]
[ 5.590032] [<c01de527>] snprintf+0x1f/0x23
[ 5.590032] [<c01a37bc>] disk_name+0x72/0xa6
[ 5.590032] [<c016e92f>] get_sb_bdev+0xea/0x10d
[ 5.590032] [<c0154d4c>] kstrdup+0x30/0x52
[ 5.590032] [<f8ac4690>] ext4_get_sb+0x20/0x25 [ext4dev]
[ 5.590032] [<f8ac6561>] ext4_fill_super+0x0/0x2043 [ext4dev]
[ 5.591032] [<c016e3d0>] vfs_kern_mount+0x37/0x88
[ 5.591032] [<c016e468>] do_kern_mount+0x31/0xbc
[ 5.591032] [<c0181aaa>] do_new_mount+0x69/0x8e
[ 5.591032] [<c0181c31>] do_mount+0x162/0x1aa
[ 5.591032] [<c017fb5e>] copy_mount_options+0x28/0x115
[ 5.591032] [<c01741f5>] getname+0x8c/0x9b
[ 5.591032] [<c0181cf0>] sys_mount+0x77/0xb7
[ 5.591032] [<c0103a02>] syscall_call+0x7/0xb
[ 5.591032] =======================
[ 5.591032] proc_dir_entry 'min_to_scan' already registered
[ 5.591032] Pid: 655, comm: mount Not tainted 2.6.27-rc3 #1
[ 5.591032] [<c019ea80>] proc_register+0xda/0x17d
[ 5.592035] [<c019eb85>] proc_create_data+0x62/0x9a
[ 5.592036] [<f8ad5adf>] ext4_mb_init+0x4cd/0x748 [ext4dev]
[ 5.592036] [<c0119f50>] __wake_up+0x32/0x42
[ 5.592036] [<c0123783>] printk+0x1b/0x1f
[ 5.592036] [<f8ac7d8a>] ext4_fill_super+0x1829/0x2043 [ext4dev]
[ 5.592036] [<c01de527>] snprintf+0x1f/0x23
[ 5.592036] [<c01a37bc>] disk_name+0x72/0xa6
[ 5.592036] [<c016e92f>] get_sb_bdev+0xea/0x10d
[ 5.592036] [<c0154d4c>] kstrdup+0x30/0x52
[ 5.592036] [<f8ac4690>] ext4_get_sb+0x20/0x25 [ext4dev]
[ 5.592036] [<f8ac6561>] ext4_fill_super+0x0/0x2043 [ext4dev]
[ 5.593024] [<c016e3d0>] vfs_kern_mount+0x37/0x88
[ 5.593024] [<c016e468>] do_kern_mount+0x31/0xbc
[ 5.593024] [<c0181aaa>] do_new_mount+0x69/0x8e
[ 5.593024] [<c0181c31>] do_mount+0x162/0x1aa
[ 5.593024] [<c017fb5e>] copy_mount_options+0x28/0x115
[ 5.593024] [<c01741f5>] getname+0x8c/0x9b
[ 5.593024] [<c0181cf0>] sys_mount+0x77/0xb7
[ 5.593024] [<c0103a02>] syscall_call+0x7/0xb
[ 5.593024] =======================
[ 5.593024] proc_dir_entry 'order2_req' already registered
[ 5.593024] Pid: 655, comm: mount Not tainted 2.6.27-rc3 #1
[ 5.593024] [<c019ea80>] proc_register+0xda/0x17d
[ 5.593024] [<c019eb85>] proc_create_data+0x62/0x9a
[ 5.594007] [<f8ad5b07>] ext4_mb_init+0x4f5/0x748 [ext4dev]
[ 5.594007] [<c0119f50>] __wake_up+0x32/0x42
[ 5.594007] [<c0123783>] printk+0x1b/0x1f
[ 5.594007] [<f8ac7d8a>] ext4_fill_super+0x1829/0x2043 [ext4dev]
[ 5.594007] [<c01de527>] snprintf+0x1f/0x23
[ 5.594007] [<c01a37bc>] disk_name+0x72/0xa6
[ 5.594007] [<c016e92f>] get_sb_bdev+0xea/0x10d
[ 5.594007] [<c0154d4c>] kstrdup+0x30/0x52
[ 5.594007] [<f8ac4690>] ext4_get_sb+0x20/0x25 [ext4dev]
[ 5.594007] [<f8ac6561>] ext4_fill_super+0x0/0x2043 [ext4dev]
[ 5.594007] [<c016e3d0>] vfs_kern_mount+0x37/0x88
[ 5.595017] [<c016e468>] do_kern_mount+0x31/0xbc
[ 5.595017] [<c0181aaa>] do_new_mount+0x69/0x8e
[ 5.595017] [<c0181c31>] do_mount+0x162/0x1aa
[ 5.595017] [<c017fb5e>] copy_mount_options+0x28/0x115
[ 5.595017] [<c01741f5>] getname+0x8c/0x9b
[ 5.595017] [<c0181cf0>] sys_mount+0x77/0xb7
[ 5.595017] [<c0103a02>] syscall_call+0x7/0xb
[ 5.595017] =======================
[ 5.595017] proc_dir_entry 'stream_req' already registered
[ 5.595017] Pid: 655, comm: mount Not tainted 2.6.27-rc3 #1
[ 5.595017] [<c019ea80>] proc_register+0xda/0x17d
[ 5.595017] [<c019eb85>] proc_create_data+0x62/0x9a
[ 5.596019] [<f8ad5b2f>] ext4_mb_init+0x51d/0x748 [ext4dev]
[ 5.596020] [<c0119f50>] __wake_up+0x32/0x42
[ 5.596020] [<c0123783>] printk+0x1b/0x1f
[ 5.596020] [<f8ac7d8a>] ext4_fill_super+0x1829/0x2043 [ext4dev]
[ 5.596020] [<c01de527>] snprintf+0x1f/0x23
[ 5.596020] [<c01a37bc>] disk_name+0x72/0xa6
[ 5.596020] [<c016e92f>] get_sb_bdev+0xea/0x10d
[ 5.596020] [<c0154d4c>] kstrdup+0x30/0x52
[ 5.596020] [<f8ac4690>] ext4_get_sb+0x20/0x25 [ext4dev]
[ 5.596020] [<f8ac6561>] ext4_fill_super+0x0/0x2043 [ext4dev]
[ 5.596020] [<c016e3d0>] vfs_kern_mount+0x37/0x88
[ 5.597022] [<c016e468>] do_kern_mount+0x31/0xbc
[ 5.597025] [<c0181aaa>] do_new_mount+0x69/0x8e
[ 5.597025] [<c0181c31>] do_mount+0x162/0x1aa
[ 5.597025] [<c017fb5e>] copy_mount_options+0x28/0x115
[ 5.597025] [<c01741f5>] getname+0x8c/0x9b
[ 5.597025] [<c0181cf0>] sys_mount+0x77/0xb7
[ 5.597025] [<c0103a02>] syscall_call+0x7/0xb
[ 5.597025] =======================
[ 5.597025] proc_dir_entry 'group_prealloc' already registered
[ 5.597025] Pid: 655, comm: mount Not tainted 2.6.27-rc3 #1
[ 5.597025] [<c019ea80>] proc_register+0xda/0x17d
[ 5.597025] [<c019eb85>] proc_create_data+0x62/0x9a
[ 5.597025] [<f8ad5b57>] ext4_mb_init+0x545/0x748 [ext4dev]
[ 5.598018] [<c0119f50>] __wake_up+0x32/0x42
[ 5.598018] [<c0123783>] printk+0x1b/0x1f
[ 5.598018] [<f8ac7d8a>] ext4_fill_super+0x1829/0x2043 [ext4dev]
[ 5.598018] [<c01de527>] snprintf+0x1f/0x23
[ 5.598018] [<c01a37bc>] disk_name+0x72/0xa6
[ 5.598018] [<c016e92f>] get_sb_bdev+0xea/0x10d
[ 5.598018] [<c0154d4c>] kstrdup+0x30/0x52
[ 5.598018] [<f8ac4690>] ext4_get_sb+0x20/0x25 [ext4dev]
[ 5.598018] [<f8ac6561>] ext4_fill_super+0x0/0x2043 [ext4dev]
[ 5.598018] [<c016e3d0>] vfs_kern_mount+0x37/0x88
[ 5.598018] [<c016e468>] do_kern_mount+0x31/0xbc
[ 5.599025] [<c0181aaa>] do_new_mount+0x69/0x8e
[ 5.599025] [<c0181c31>] do_mount+0x162/0x1aa
[ 5.599025] [<c017fb5e>] copy_mount_options+0x28/0x115
[ 5.599025] [<c01741f5>] getname+0x8c/0x9b
[ 5.599025] [<c0181cf0>] sys_mount+0x77/0xb7
[ 5.599025] [<c0103a02>] syscall_call+0x7/0xb
[ 5.599025] =======================
[ 5.599025] EXT4-fs: mballoc enabled
[ 5.632375] kjournald starting. Commit interval 5 seconds
[ 5.635419] EXT3 FS on cciss/c0d0p10, internal journal
[ 5.635419] EXT3-fs: mounted filesystem with ordered data mode.
[ 8.991976] tg3: eth0: Link is up at 1000 Mbps, full duplex.
[ 8.991976] tg3: eth0: Flow control is on for TX and on for RX.
[ 10.141001] tg3: eth1: Link is up at 100 Mbps, full duplex.
[ 10.141001] tg3: eth1: Flow control is on for TX and on for RX.
[ 12.605123] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 12.605123] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plase use
[ 12.605123] nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
[ 12.605123] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 12.639002] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 35.228001] JBD: barrier-based sync failed on cciss/c0d0p8 - disabling barriers
[ 35.641007] JBD: barrier-based sync failed on cciss/c0d0p9 - disabling barriers
--
Ralf Hildebrandt (i.A. des IT-Zentrums) Ralf.Hildebrandt@charite.de
Charite - Universitätsmedizin Berlin Tel. +49 (0)30-450 570-155
Gemeinsame Einrichtung von FU- und HU-Berlin Fax. +49 (0)30-450 570-962
IT-Zentrum Standort CBF send no mail to snickebo@charite.de
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2008-08-13 13:11 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-08-13 13:00 2.6.27-rc3: ext4 mount problem (proc_dir_entry 'stats' already registered) Ralf Hildebrandt
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.