From: Marek Vasut <marek.vasut@gmail.com>
To: Russell King - ARM Linux <linux@arm.linux.org.uk>
Cc: linux-arm-kernel@lists.arm.linux.org.uk,
Eric Miao <eric.y.miao@gmail.com>,
linux-ide@vger.kernel.org, bzolnier@gmail.com
Subject: Re: [PATCH 4/6] PalmLD IDE
Date: Sat, 16 Aug 2008 16:30:09 +0200 [thread overview]
Message-ID: <200808161630.09508.marek.vasut@gmail.com> (raw)
In-Reply-To: <20080816090803.GI5946@flint.arm.linux.org.uk>
[-- Attachment #1: Type: text/plain, Size: 728 bytes --]
Dne Saturday 16 of August 2008 11:08:03 Russell King - ARM Linux napsal(a):
> On Wed, Aug 13, 2008 at 10:52:23PM +0200, Marek Vasut wrote:
> > This patch adds palmld ide channel support, same as previous patch, I
> > think this can be merged since it wont break anything.
>
> I think this one also needs review by the Linux ATA folk. Mention to
> them that it's part of a patchset for ARM and that you'd prefer it
> to be merged into the ARM tree.
>
> > +static const char drvname[] = "pata_palmld";
> > +MODULE_ALIAS("platform: "drvname);
>
> Have you tried building this as a module? Also, IIRC, there isn't
> supposed to be a space after the colon...
Ok, I fixed the issues and CCed linux-ide and the maintainer.
Thanks
[-- Attachment #2: 0004-PalmLD-IDE-support.patch --]
[-- Type: text/x-diff, Size: 5500 bytes --]
From 8881f9cbf66a3050de328f6c020f864ca04c1e9b Mon Sep 17 00:00:00 2001
From: Marek <marek.vasut@gmail.com>
Date: Sat, 16 Aug 2008 16:25:34 +0200
Subject: [PATCH] PalmLD: IDE support
Support for Palm LifeDrive's internal harddrive
---
drivers/ata/Kconfig | 9 +++
drivers/ata/Makefile | 1 +
drivers/ata/pata_palmld.c | 145 +++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 155 insertions(+), 0 deletions(-)
create mode 100644 drivers/ata/pata_palmld.c
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index ae84949..8e43d11 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -533,6 +533,15 @@ config PATA_OPTIDMA
If unsure, say N.
+config PATA_PALMLD
+ tristate "Palm LifeDrive PATA support"
+ depends on MACH_PALMLD
+ help
+ This option enables support for Palm LifeDrive's internal ATA
+ port via the new ATA layer.
+
+ If unsure, say N.
+
config PATA_PCMCIA
tristate "PCMCIA PATA support"
depends on PCMCIA
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index 674965f..2b393c9 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -50,6 +50,7 @@ obj-$(CONFIG_PATA_MPC52xx) += pata_mpc52xx.o
obj-$(CONFIG_PATA_MARVELL) += pata_marvell.o
obj-$(CONFIG_PATA_MPIIX) += pata_mpiix.o
obj-$(CONFIG_PATA_OLDPIIX) += pata_oldpiix.o
+obj-$(CONFIG_PATA_PALMLD) += pata_palmld.o
obj-$(CONFIG_PATA_PCMCIA) += pata_pcmcia.o
obj-$(CONFIG_PATA_PDC2027X) += pata_pdc2027x.o
obj-$(CONFIG_PATA_PDC_OLD) += pata_pdc202xx_old.o
diff --git a/drivers/ata/pata_palmld.c b/drivers/ata/pata_palmld.c
new file mode 100644
index 0000000..f0693f8
--- /dev/null
+++ b/drivers/ata/pata_palmld.c
@@ -0,0 +1,145 @@
+/*
+ * drivers/ata/pata_palmld.c
+ *
+ * Driver for IDE channel in Palm LifeDrive
+ *
+ * Based on research of:
+ * Alex Osborne <ato@meshy.org>
+ *
+ * Rewrite for mainline:
+ * Marek Vasut <marek.vasut@gmail.com>
+ *
+ * Rewritten version based on pata_ixp4xx_cf.c:
+ * ixp4xx PATA/Compact Flash driver
+ * Copyright (C) 2006-07 Tower Technologies
+ * Author: Alessandro Zummo <a.zummo@towertech.it>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/libata.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+
+#include <scsi/scsi_host.h>
+#include <mach/palmld.h>
+
+#define DRV_NAME "pata_palmld"
+
+static struct scsi_host_template palmld_sht = {
+ ATA_PIO_SHT(DRV_NAME),
+};
+
+static struct ata_port_operations palmld_port_ops = {
+ .inherits = &ata_sff_port_ops,
+ .sff_data_xfer = ata_sff_data_xfer_noirq,
+ .cable_detect = ata_cable_40wire,
+};
+
+static __devinit int palmld_pata_probe(struct platform_device *pdev)
+{
+ struct ata_host *host;
+ struct ata_port *ap;
+ void __iomem *mem;
+ int ret;
+
+ /* allocate host */
+ host = ata_host_alloc(&pdev->dev, 1);
+ if (!host)
+ return -ENOMEM;
+
+ /* remap drive's physical memory address */
+ mem = devm_ioremap(&pdev->dev, PALMLD_IDE_PHYS, 0x1000);
+ if (!mem)
+ return -ENOMEM;
+
+ /* request and activate power GPIO, IRQ GPIO */
+ ret = gpio_request(GPIO_NR_PALMLD_IDE_PWEN, "HDD PWR");
+ if (ret)
+ goto err1;
+ ret = gpio_direction_output(GPIO_NR_PALMLD_IDE_PWEN, 1);
+ if (ret)
+ goto err2;
+
+ ret = gpio_request(GPIO_NR_PALMLD_IDE_IRQ, "HDD IRQ");
+ if (ret)
+ goto err2;
+ ret = gpio_direction_input(GPIO_NR_PALMLD_IDE_IRQ);
+ if (ret)
+ goto err3;
+
+ /* we'd better wait for drive's ready signal here
+ (if we knew where it will come from) */
+ msleep(300);
+
+ /* setup the ata port */
+ ap = host->ports[0];
+ ap->ops = &palmld_port_ops;
+ ap->pio_mask = ATA_PIO4;
+ ap->flags |= ATA_FLAG_MMIO | ATA_FLAG_NO_LEGACY | ATA_FLAG_NO_ATAPI;
+
+ /* memory mapping voodoo */
+ ap->ioaddr.cmd_addr = mem + 0x10;
+ ap->ioaddr.altstatus_addr = mem + 0xe;
+ ap->ioaddr.ctl_addr = mem + 0xe;
+
+ /* start the port */
+ ata_sff_std_ports(&ap->ioaddr);
+
+ /* activate host */
+ return ata_host_activate(host, gpio_to_irq(GPIO_NR_PALMLD_IDE_IRQ),
+ ata_sff_interrupt, IRQF_TRIGGER_RISING,
+ &palmld_sht);
+err3:
+ gpio_free(GPIO_NR_PALMLD_IDE_IRQ);
+err2:
+ gpio_free(GPIO_NR_PALMLD_IDE_PWEN);
+err1:
+ return ret;
+}
+
+static __devexit int palmld_pata_remove(struct platform_device *dev)
+{
+ struct ata_host *host = platform_get_drvdata(dev);
+
+ ata_host_detach(host);
+
+ gpio_free(GPIO_NR_PALMLD_IDE_PWEN);
+ gpio_free(GPIO_NR_PALMLD_IDE_IRQ);
+
+ return 0;
+}
+
+static struct platform_driver palmld_pata_platform_driver = {
+ .driver = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ },
+ .probe = palmld_pata_probe,
+ .remove = __devexit_p(palmld_pata_remove),
+};
+
+static int __init palmld_pata_init(void)
+{
+ return platform_driver_register(&palmld_pata_platform_driver);
+}
+
+static void __exit palmld_pata_exit(void)
+{
+ platform_driver_unregister(&palmld_pata_platform_driver);
+}
+
+MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>");
+MODULE_DESCRIPTION("PalmLD PATA driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRV_NAME);
+
+module_init(palmld_pata_init);
+module_exit(palmld_pata_exit);
--
1.5.6
next parent reply other threads:[~2008-08-16 14:26 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <200808132252.23732.marek.vasut@gmail.com>
[not found] ` <20080816090803.GI5946@flint.arm.linux.org.uk>
2008-08-16 14:30 ` Marek Vasut [this message]
2009-03-22 21:23 [PATCH 4/6] PalmLD IDE Marek Vasut
2009-04-19 16:14 ` Marek Vasut
2009-04-20 20:38 ` Bartlomiej Zolnierkiewicz
2009-04-20 20:53 ` Marek Vasut
2009-04-20 21:01 ` Bartlomiej Zolnierkiewicz
2009-04-20 21:17 ` Alan Cox
2009-04-21 4:02 ` Eric Miao
2009-04-21 14:01 ` Marek Vasut
-- strict thread matches above, loose matches on Subject: below --
2009-04-21 0:05 Marek Vasut
2009-04-21 14:27 ` Alan Cox
2009-04-21 14:52 ` Marek Vasut
2009-04-21 15:19 ` Alan Cox
2009-04-21 17:44 ` Marek Vasut
2009-04-21 19:35 ` Alan Cox
2009-04-21 19:38 ` Jeff Garzik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200808161630.09508.marek.vasut@gmail.com \
--to=marek.vasut@gmail.com \
--cc=bzolnier@gmail.com \
--cc=eric.y.miao@gmail.com \
--cc=linux-arm-kernel@lists.arm.linux.org.uk \
--cc=linux-ide@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.