All of lore.kernel.org
 help / color / mirror / Atom feed
* How do i make reiser4 filesystem available via /etc/fstab ?
@ 2008-08-16  8:19 doiggl
  2008-08-16  8:23 ` Volker Armin Hemmann
  0 siblings, 1 reply; 6+ messages in thread
From: doiggl @ 2008-08-16  8:19 UTC (permalink / raw)
  To: reiserfs-devel

hello,

Question.
How do I make reiser4 a permanent fixture via /etc/fstab (after reboots)?.
I am using opensuse 11.

Manual commands I have used in the past to access the filesystem:
# mkfs.reiser4 -o create=ccreg40,compress=lzo1 /dev/sda -fy
# fsck.reiser4 --fix /dev/sda -y
# mkdir /reiser4
# mount -t reiser4 /dev/sda /reiser4

Access looks like: /dev/sda on /reiser4 type reiser4 (rw)

My fstab looks like this at the moment:

# cat /etc/fstab
/dev/disk/by-id/scsi-SATA_WDC_WD800BB-00J_WD-WCAM9L615149-part1 swap      
          swap       defaults              0 0
/dev/disk/by-id/scsi-SATA_WDC_WD800BB-00J_WD-WCAM9L615149-part2 /         
          reiserfs   acl,user_xattr        1 1
/dev/disk/by-id/scsi-SATA_WDC_WD800BB-00J_WD-WCAM9L615149-part3 /home     
          reiserfs   defaults              1 2
proc                 /proc                proc       defaults             
0 0
sysfs                /sys                 sysfs      noauto               
0 0
debugfs              /sys/kernel/debug    debugfs    noauto               
0 0
usbfs                /proc/bus/usb        usbfs      noauto               
0 0
devpts               /dev/pts             devpts     mode=0620,gid=5      
0 0


^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: How do i make reiser4 filesystem available via /etc/fstab ?
  2008-08-16  8:19 How do i make reiser4 filesystem available via /etc/fstab ? doiggl
@ 2008-08-16  8:23 ` Volker Armin Hemmann
  2008-08-16 10:44   ` doiggl
  0 siblings, 1 reply; 6+ messages in thread
From: Volker Armin Hemmann @ 2008-08-16  8:23 UTC (permalink / raw)
  To: reiserfs-devel

On Samstag, 16. August 2008, doiggl@velocitynet.com.au wrote:
> hello,
>
> Question.
> How do I make reiser4 a permanent fixture via /etc/fstab (after reboots)?.
> I am using opensuse 11.
>
> Manual commands I have used in the past to access the filesystem:
> # mkfs.reiser4 -o create=ccreg40,compress=lzo1 /dev/sda -fy
> # fsck.reiser4 --fix /dev/sda -y
> # mkdir /reiser4
> # mount -t reiser4 /dev/sda /reiser4
>
> Access looks like: /dev/sda on /reiser4 type reiser4 (rw)
>
> My fstab looks like this at the moment:
>
> # cat /etc/fstab
> /dev/disk/by-id/scsi-SATA_WDC_WD800BB-00J_WD-WCAM9L615149-part1 swap
>           swap       defaults              0 0
> /dev/disk/by-id/scsi-SATA_WDC_WD800BB-00J_WD-WCAM9L615149-part2 /
>           reiserfs   acl,user_xattr        1 1
> /dev/disk/by-id/scsi-SATA_WDC_WD800BB-00J_WD-WCAM9L615149-part3 /home
>           reiserfs   defaults              1 2
> proc                 /proc                proc       defaults
> 0 0
> sysfs                /sys                 sysfs      noauto
> 0 0
> debugfs              /sys/kernel/debug    debugfs    noauto
> 0 0
> usbfs                /proc/bus/usb        usbfs      noauto
> 0 0
> devpts               /dev/pts             devpts     mode=0620,gid=5
> 0 0
>
> --
> To unsubscribe from this list: send the line "unsubscribe reiserfs-devel"
> in the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

you don't mkfs whole disks, only partitions.

And then have a look.
First path to device (like /dev/sdaX) then path to mount point, then fs type, 
additional options, 0 0 


^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: How do i make reiser4 filesystem available via /etc/fstab ?
  2008-08-16  8:23 ` Volker Armin Hemmann
@ 2008-08-16 10:44   ` doiggl
  2008-08-16 11:47     ` Volker Armin Hemmann
  2008-08-16 16:06     ` Sascha Lucas
  0 siblings, 2 replies; 6+ messages in thread
From: doiggl @ 2008-08-16 10:44 UTC (permalink / raw)
  To: reiserfs-devel

Hello,
I tried the following in /etc/fstab, and restarted, no luck,
/dev/sda  /reiser4 reiser4 0 0

By the way, this whole disk(separate to the o/s) was intended to be reiser4.
Glenn

> Volker Armin Hemmann wrote :
> you don't mkfs whole disks, only partitions.
>
> And then have a look.
> First path to device (like /dev/sdaX) then path to mount point, then fs
> type,
> additional options, 0 0

>> Hello,
>>
>> Question.
>> How do I make reiser4 a permanent fixture via /etc/fstab (after
>> reboots)?.
>> I am using opensuse 11.
>>
>> Manual commands I have used in the past to access the filesystem:
>> # mkfs.reiser4 -o create=ccreg40,compress=lzo1 /dev/sda -fy
>> # fsck.reiser4 --fix /dev/sda -y
>> # mkdir /reiser4
>> # mount -t reiser4 /dev/sda /reiser4



^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: How do i make reiser4 filesystem available via /etc/fstab ?
  2008-08-16 10:44   ` doiggl
@ 2008-08-16 11:47     ` Volker Armin Hemmann
  2008-08-16 16:14       ` Sascha Lucas
  2008-08-16 16:06     ` Sascha Lucas
  1 sibling, 1 reply; 6+ messages in thread
From: Volker Armin Hemmann @ 2008-08-16 11:47 UTC (permalink / raw)
  To: reiserfs-devel

On Samstag, 16. August 2008, doiggl@velocitynet.com.au wrote:
> Hello,
> I tried the following in /etc/fstab, and restarted, no luck,
> /dev/sda  /reiser4 reiser4 0 0
>
> By the way, this whole disk(separate to the o/s) was intended to be
> reiser4. Glenn

then create one big partition.



^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: How do i make reiser4 filesystem available via /etc/fstab ?
  2008-08-16 10:44   ` doiggl
  2008-08-16 11:47     ` Volker Armin Hemmann
@ 2008-08-16 16:06     ` Sascha Lucas
  1 sibling, 0 replies; 6+ messages in thread
From: Sascha Lucas @ 2008-08-16 16:06 UTC (permalink / raw)
  To: reiserfs-devel

Am Samstag, 16. August 2008 12:44:38 schrieb doiggl@velocitynet.com.au:
> I tried the following in /etc/fstab, and restarted, no luck,
> /dev/sda  /reiser4 reiser4 0 0

the options column is missing: i.e. "noatime" or just "defaults"

/dev/sda /reiser4 reiser4 noatime 0 0

see MOUNT(8) and FSTAB(5)

Sascha.

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: How do i make reiser4 filesystem available via /etc/fstab ?
  2008-08-16 11:47     ` Volker Armin Hemmann
@ 2008-08-16 16:14       ` Sascha Lucas
  0 siblings, 0 replies; 6+ messages in thread
From: Sascha Lucas @ 2008-08-16 16:14 UTC (permalink / raw)
  To: reiserfs-devel

Am Samstag, 16. August 2008 13:47:15 schrieb Volker Armin Hemmann:
> > By the way, this whole disk(separate to the o/s) was intended to be
> > reiser4. Glenn
>
> then create one big partition.

Just want say that this is not necessary. filesystems can use the whole disk 
without partitions. It's a common way to bypass DOS partion limitations. 
Don't know the limit atm, but I remember to do so with >20TB :-).

Sascha.

^ permalink raw reply	[flat|nested] 6+ messages in thread

end of thread, other threads:[~2008-08-16 16:14 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-08-16  8:19 How do i make reiser4 filesystem available via /etc/fstab ? doiggl
2008-08-16  8:23 ` Volker Armin Hemmann
2008-08-16 10:44   ` doiggl
2008-08-16 11:47     ` Volker Armin Hemmann
2008-08-16 16:14       ` Sascha Lucas
2008-08-16 16:06     ` Sascha Lucas

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.