From: Joshua Hoblitt <josh@hoblitt.com>
To: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>,
bugme-daemon@bugzilla.kernel.org, linux-kernel@vger.kernel.org,
j_kernel@hoblitt.com
Subject: Re: [Bug 11388] New: 2.6.27-rc3 warns about MTRR range; only 3 of 16gb of memory is usable
Date: Thu, 21 Aug 2008 10:55:58 -1000 [thread overview]
Message-ID: <20080821205558.GC23377@hoblitt.com> (raw)
In-Reply-To: <86802c440808201849k6665c395x5a5b871eca55addd@mail.gmail.com>
[-- Attachment #1: Type: text/plain, Size: 6844 bytes --]
Both hunks in the patch applied with an offset of -36 but the show_msr
flag doesn't seem to have any effect. The dmesg is still the same
number of lines accord to wc.
I'm attaching the new dmesg anyways.
$ cat /proc/cmdline
root=/dev/ram0 real_root=/dev/sda3 init=/linuxrc show_msr=1 console=tty0
console=ttyS0,115200n8
-J
--
On Wed, Aug 20, 2008 at 06:49:11PM -0700, Yinghai Lu wrote:
> On Wed, Aug 20, 2008 at 6:20 PM, Yinghai Lu <yhlu.kernel@gmail.com> wrote:
> > On Wed, Aug 20, 2008 at 6:04 PM, Andrew Morton
> > <akpm@linux-foundation.org> wrote:
> >>
> >> (switched to email. Please respond via emailed reply-to-all, not via the
> >> bugzilla web interface).
> >>
> >> On Wed, 20 Aug 2008 17:38:59 -0700 (PDT)
> >> bugme-daemon@bugzilla.kernel.org wrote:
> >>
> >>> http://bugzilla.kernel.org/show_bug.cgi?id=11388
> >>>
> >>> Summary: 2.6.27-rc3 warns about MTRR range; only 3 of 16gb of
> >>> memory is usable
> >>> Product: Memory Management
> >>> Version: 2.5
> >>> KernelVersion: 2.6.27-rc3
> >>> Platform: All
> >>> OS/Version: Linux
> >>> Tree: Mainline
> >>> Status: NEW
> >>> Severity: normal
> >>> Priority: P1
> >>> Component: MTTR
> >>> AssignedTo: akpm@osdl.org
> >>> ReportedBy: j_kernel@hoblitt.com
> >>>
> >>>
> >>> Latest working kernel version: 2.4.24.2 (possibly later)
> >>> Earliest failing kernel version: 2.6.27-rc3-21328-ga7f5aaf (from netdev-2.6)
> >>> Distribution: Gentoo
> >>> Hardware Environment: 2x Intel X5482
> >>> Software Environment:
> >>> Problem Description:
> >>>
> >>> [ 0.000000] WARNING: BIOS bug: CPU MTRRs don't cover all of memory, losing
> >>> 13056MB of RAM.
> >>> [ 0.000000] ------------[ cut here ]------------
> >>> [ 0.000000] WARNING: at arch/x86/kernel/cpu/mtrr/main.c:1561
> >>> mtrr_trim_uncached_memory+0x508/0x550()
> >>> [ 0.000000] Modules linked in:
> >>> [ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.27-rc3-21328-ga7f5aaf #8
> >>> [ 0.000000]
> >>> [ 0.000000] Call Trace:
> >>> [ 0.000000] [<ffffffff80234c3e>] warn_on_slowpath+0x51/0x77
> >>> [ 0.000000] [<ffffffff8023570a>] printk+0x4e/0x56
> >>> [ 0.000000] [<ffffffff803add02>] sort+0xfa/0x18c
> >>> [ 0.000000] [<ffffffff808283d3>] cmp_range+0x0/0x6
> >>> [ 0.000000] [<ffffffff80828a47>] mtrr_trim_uncached_memory+0x508/0x550
> >>> [ 0.000000] [<ffffffff802178e1>] post_set+0x20/0x3d
> >>> [ 0.000000] [<ffffffff80824f99>] setup_arch+0x39d/0x6be
> >>> [ 0.000000] [<ffffffff8081e962>] start_kernel+0x74/0x341
> >>> [ 0.000000] [<ffffffff8081e394>] x86_64_start_kernel+0xe3/0xe7
> >>> [ 0.000000]
> >>> [ 0.000000] ---[ end trace 4eaa2a86a8e2da22 ]---
> >>>
> >>>
> >>> Steps to reproduce:
> >>>
> >>> This warning isn't present under 2.6.24.2 and the full range of physical memory
> >>> is usable.
> >>
> >> Looks like a post-2.6.26 regression caused by
> >> 12031a624af7816ec7660b82be648aa3703b4ebe.
> > reg00: base=0xd0000000 (3328MB), size=196864MB: uncachable, count=1
> > reg01: base=0xe0000000 (3584MB), size=197120MB: uncachable, count=1
> > reg02: base=0x00000000 ( 0MB), size=212992MB: write-back, count=1
> > reg03: base=0x400000000 (16384MB), size=197120MB: write-back, count=1
> > reg04: base=0x420000000 (16896MB), size=196864MB: write-back, count=1
> >
> > the size mtrr looks crazy.
>
> please apply attached patch and boot with show_msr=1 to dump the msr
> (including mtrr)
>
> YH
> [PATCH] x86_64: printout msr
>
> commandline show_msr=1 for bsp, show_msr=32 for all 32 cpus.
>
> Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
>
> ---
> arch/x86/kernel/cpu/common_64.c | 46 ++++++++++++++++++++++++++++++++++++++++
> include/asm-x86/msr.h | 23 ++++++++++++++++++++
> 2 files changed, 69 insertions(+)
>
> Index: linux-2.6/arch/x86/kernel/cpu/common_64.c
> ===================================================================
> --- linux-2.6.orig/arch/x86/kernel/cpu/common_64.c
> +++ linux-2.6/arch/x86/kernel/cpu/common_64.c
> @@ -430,6 +430,49 @@ static __init int setup_noclflush(char *
> }
> __setup("noclflush", setup_noclflush);
>
> +struct msr_range {
> + unsigned min;
> + unsigned max;
> +};
> +
> +static struct msr_range msr_range_array[] __cpuinitdata = {
> + { 0x00000000, 0x00000418},
> + { 0xc0000000, 0xc000040b},
> + { 0xc0010000, 0xc0010142},
> + { 0xc0011000, 0xc001103b},
> +};
> +
> +static void __cpuinit print_cpu_msr(void)
> +{
> + unsigned index;
> + u64 val;
> + int i;
> + unsigned index_min, index_max;
> +
> + for (i = 0; i < ARRAY_SIZE(msr_range_array); i++) {
> + index_min = msr_range_array[i].min;
> + index_max = msr_range_array[i].max;
> + for (index = index_min; index < index_max; index++) {
> + if (rdmsrl_amd_safe(index, &val))
> + continue;
> + printk(KERN_INFO " MSR%08x: %016llx\n", index, val);
> + }
> + }
> +}
> +
> +static int show_msr __cpuinitdata;
> +static __init int setup_show_msr(char *arg)
> +{
> + int num;
> +
> + get_option(&arg, &num);
> +
> + if (num > 0)
> + show_msr = num;
> + return 1;
> +}
> +__setup("show_msr=", setup_show_msr);
> +
> void __cpuinit print_cpu_info(struct cpuinfo_x86 *c)
> {
> if (c->x86_model_id[0])
> @@ -439,6 +482,9 @@ void __cpuinit print_cpu_info(struct cpu
> printk(KERN_CONT " stepping %02x\n", c->x86_mask);
> else
> printk(KERN_CONT "\n");
> +
> + if (c->cpu_index < show_msr)
> + print_cpu_msr();
> }
>
> static __init int setup_disablecpuid(char *arg)
> Index: linux-2.6/include/asm-x86/msr.h
> ===================================================================
> --- linux-2.6.orig/include/asm-x86/msr.h
> +++ linux-2.6/include/asm-x86/msr.h
> @@ -63,6 +63,22 @@ static inline unsigned long long native_
> return EAX_EDX_VAL(val, low, high);
> }
>
> +static inline unsigned long long native_read_msr_amd_safe(unsigned int msr,
> + int *err)
> +{
> + DECLARE_ARGS(val, low, high);
> +
> + asm volatile("2: rdmsr ; xor %0,%0\n"
> + "1:\n\t"
> + ".section .fixup,\"ax\"\n\t"
> + "3: mov %3,%0 ; jmp 1b\n\t"
> + ".previous\n\t"
> + _ASM_EXTABLE(2b, 3b)
> + : "=r" (*err), EAX_EDX_RET(val, low, high)
> + : "c" (msr), "D" (0x9c5a203a), "i" (-EFAULT));
> + return EAX_EDX_VAL(val, low, high);
> +}
> +
> static inline void native_write_msr(unsigned int msr,
> unsigned low, unsigned high)
> {
> @@ -158,6 +174,13 @@ static inline int rdmsrl_safe(unsigned m
> *p = native_read_msr_safe(msr, &err);
> return err;
> }
> +static inline int rdmsrl_amd_safe(unsigned msr, unsigned long long *p)
> +{
> + int err;
> +
> + *p = native_read_msr_amd_safe(msr, &err);
> + return err;
> +}
>
> #define rdtscl(low) \
> ((low) = (u32)native_read_tsc())
[-- Attachment #2: 2.6.27-r3.dmesg2 --]
[-- Type: text/plain, Size: 43144 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Linux version 2.6.27-rc3-21328-ga7f5aaf (root@ipp000) (gcc version 4.1.2 (Gentoo 4.1.2 p1.1)) #8 SMP Wed Aug 20 14:17:51 HST 2008
[ 0.000000] Command line: root=/dev/ram0 real_root=/dev/sda3 init=/linuxrc show_msr=1 console=tty0 console=ttyS0,115200n8
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e400 (usable)
[ 0.000000] BIOS-e820: 000000000009e400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000ca000 - 00000000000cc000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cff00000 (usable)
[ 0.000000] BIOS-e820: 00000000cff00000 - 00000000cff0a000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cff0a000 - 00000000cff0b000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cff0b000 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000430000000 (usable)
[ 0.000000] last_pfn = 0x430000 max_arch_pfn = 0x3ffffffff
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] WARNING: BIOS bug: CPU MTRRs don't cover all of memory, losing 13056MB of RAM.
[ 0.000000] ------------[ cut here ]------------
[ 0.000000] WARNING: at arch/x86/kernel/cpu/mtrr/main.c:1561 mtrr_trim_uncached_memory+0x508/0x550()
[ 0.000000] Modules linked in:
[ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.27-rc3-21328-ga7f5aaf #8
[ 0.000000]
[ 0.000000] Call Trace:
[ 0.000000] [<ffffffff80234c3e>] warn_on_slowpath+0x51/0x77
[ 0.000000] [<ffffffff8023570a>] printk+0x4e/0x56
[ 0.000000] [<ffffffff803add02>] sort+0xfa/0x18c
[ 0.000000] [<ffffffff808283d3>] cmp_range+0x0/0x6
[ 0.000000] [<ffffffff80828a47>] mtrr_trim_uncached_memory+0x508/0x550
[ 0.000000] [<ffffffff802178e1>] post_set+0x20/0x3d
[ 0.000000] [<ffffffff80824f99>] setup_arch+0x39d/0x6be
[ 0.000000] [<ffffffff8081e962>] start_kernel+0x74/0x341
[ 0.000000] [<ffffffff8081e394>] x86_64_start_kernel+0xe3/0xe7
[ 0.000000]
[ 0.000000] ---[ end trace 4eaa2a86a8e2da22 ]---
[ 0.000000] update e820 for mtrr
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 000000000009e400 (usable)
[ 0.000000] modified: 000000000009e400 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000ca000 - 00000000000cc000 (reserved)
[ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000cff00000 (usable)
[ 0.000000] modified: 00000000cff00000 - 00000000cff0a000 (ACPI data)
[ 0.000000] modified: 00000000cff0a000 - 00000000cff0b000 (ACPI NVS)
[ 0.000000] modified: 00000000cff0b000 - 00000000d0000000 (reserved)
[ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000ff000000 - 0000000430000000 (reserved)
[ 0.000000] last_pfn = 0xcff00 max_arch_pfn = 0x3ffffffff
[ 0.000000] init_memory_mapping
[ 0.000000] 0000000000 - 00cfe00000 page 2M
[ 0.000000] 00cfe00000 - 00cff00000 page 4k
[ 0.000000] kernel direct mapping tables up to cff00000 @ 8000-e000
[ 0.000000] last_map_addr: cff00000 end: cff00000
[ 0.000000] RAMDISK: 37e11000 - 37feff22
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP 000F7020, 0024 (r2 PTLTD )
[ 0.000000] ACPI: XSDT CFF0395D, 005C (r1 PTLTD XSDT 6040000 LTP 0)
[ 0.000000] ACPI: FACP CFF09D60, 00F4 (r3 INTEL TUMWATER 6040000 PTL 3)
[ 0.000000] ACPI: DSDT CFF0599D, 434F (r1 Intel SEABURG 6040000 MSFT 3000000)
[ 0.000000] ACPI: FACS CFF0AFC0, 0040
[ 0.000000] ACPI: _MAR CFF09E54, 0030 (r1 Intel OEMDMAR 6040000 LOHR 1)
[ 0.000000] ACPI: APIC CFF09E84, 00C8 (r1 PTLTD APIC 6040000 LTP 0)
[ 0.000000] ACPI: MCFG CFF09F4C, 003C (r1 PTLTD MCFG 6040000 LTP 0)
[ 0.000000] ACPI: BOOT CFF09F88, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
[ 0.000000] ACPI: SPCR CFF09FB0, 0050 (r1 PTLTD $UCRTBL$ 6040000 PTL 1)
[ 0.000000] ACPI: SSDT CFF039B9, 1405 (r1 PmRef CpuPm 3000 INTL 20050228)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-00000000cff00000
[ 0.000000] Bootmem setup node 0 0000000000000000-00000000cff00000
[ 0.000000] NODE_DATA [000000000000c000 - 0000000000016fff]
[ 0.000000] bootmap [0000000000017000 - 0000000000030fdf] pages 1a
[ 0.000000] (6 early reservations) ==> bootmem [0000000000 - 00cff00000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0000200000 - 00009eff70] TEXT DATA BSS ==> [0000200000 - 00009eff70]
[ 0.000000] #3 [0037e11000 - 0037feff22] RAMDISK ==> [0037e11000 - 0037feff22]
[ 0.000000] #4 [000009e400 - 0000100000] BIOS reserved ==> [000009e400 - 0000100000]
[ 0.000000] #5 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000]
[ 0.000000] found SMP MP-table at [ffff8800000f7050] 000f7050
[ 0.000000] [ffffe20000000000-ffffe200033fffff] PMD -> [ffff880001200000-ffff8800045fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x000cff00
[ 0.000000] On node 0 totalpages: 851614
[ 0.000000] DMA zone: 1797 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 834372 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec88000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 9, version 0, address 0xfec88000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000ca000
[ 0.000000] PM: Registered nosave memory: 00000000000ca000 - 00000000000cc000
[ 0.000000] PM: Registered nosave memory: 00000000000cc000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at d1000000 (gap: d0000000:10000000)
[ 0.000000] PERCPU: Allocating 51624 bytes of per cpu data
[ 0.000000] NR_CPUS: 32, nr_cpu_ids: 8, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 836169
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=/dev/ram0 real_root=/dev/sda3 init=/linuxrc show_msr=1 console=tty0 console=ttyS0,115200n8
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] TSC calibrated against PM_TIMER
[ 0.000000] Detected 3192.011 MHz processor.
[ 0.003333] Console: colour VGA+ 80x25
[ 0.003333] console [tty0] enabled
[ 0.003333] console [ttyS0] enabled
[ 0.003333] Checking aperture...
[ 0.003333] No AGP bridge found
[ 0.003333] Memory: 3342244k/3406848k available (3799k kernel code, 64212k reserved, 2164k data, 672k init)
[ 0.003333] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.003333] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.006666] Calibrating delay loop (skipped), value calculated using timer frequency.. 6386.02 BogoMIPS (lpj=10640036)
[ 0.013085] Security Framework initialized
[ 0.016665] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.021467] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.026664] Mount-cache hash table entries: 256
[ 0.029998] Initializing cgroup subsys ns
[ 0.033331] Initializing cgroup subsys cpuacct
[ 0.036664] Initializing cgroup subsys memory
[ 0.039997] Initializing cgroup subsys devices
[ 0.043330] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.048288] CPU: L2 cache: 6144K
[ 0.051710] CPU 0/0 -> Node 0
[ 0.054867] CPU: Physical Processor ID: 0
[ 0.059061] CPU: Processor Core ID: 0
[ 0.062918] CPU0: Thermal monitoring enabled (TM2)
[ 0.066662] using mwait in idle threads.
[ 0.069995] ACPI: Core revision 20080609
[ 0.082860] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.119582] CPU0: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06
[ 0.124747] Using local APIC timer interrupts.
[ 0.133324] APIC timer calibration result 24937571
[ 0.133324] Detected 24.937 MHz APIC timer.
[ 0.136657] Booting processor 1/4 ip 6000
[ 0.149990] Initializing CPU#1
[ 0.149990] Calibrating delay using timer specific routine.. 6386.11 BogoMIPS (lpj=10640186)
[ 0.149990] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.149990] CPU: L2 cache: 6144K
[ 0.149990] CPU 1/4 -> Node 0
[ 0.149990] CPU: Physical Processor ID: 1
[ 0.149990] CPU: Processor Core ID: 0
[ 0.149990] CPU1: Thermal monitoring enabled (TM2)
[ 0.149990] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.233318] CPU1: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06
[ 0.239984] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.243317] Booting processor 2/1 ip 6000
[ 0.256649] Initializing CPU#2
[ 0.256649] Calibrating delay using timer specific routine.. 6386.10 BogoMIPS (lpj=10640161)
[ 0.256649] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.256649] CPU: L2 cache: 6144K
[ 0.256649] CPU 2/1 -> Node 0
[ 0.256649] CPU: Physical Processor ID: 0
[ 0.256649] CPU: Processor Core ID: 1
[ 0.256649] CPU2: Thermal monitoring enabled (TM2)
[ 0.256649] x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
[ 0.339977] CPU2: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06
[ 0.348077] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.353310] Booting processor 3/5 ip 6000
[ 0.366642] Initializing CPU#3
[ 0.366642] Calibrating delay using timer specific routine.. 6386.11 BogoMIPS (lpj=10640183)
[ 0.366642] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.366642] CPU: L2 cache: 6144K
[ 0.366642] CPU 3/5 -> Node 0
[ 0.366642] CPU: Physical Processor ID: 1
[ 0.366642] CPU: Processor Core ID: 1
[ 0.366642] CPU3: Thermal monitoring enabled (TM2)
[ 0.366642] x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106
[ 0.449857] CPU3: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06
[ 0.456636] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 0.459970] Booting processor 4/2 ip 6000
[ 0.473302] Initializing CPU#4
[ 0.473302] Calibrating delay using timer specific routine.. 6386.08 BogoMIPS (lpj=10640133)
[ 0.473302] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.473302] CPU: L2 cache: 6144K
[ 0.473302] CPU 4/2 -> Node 0
[ 0.473302] CPU: Physical Processor ID: 0
[ 0.473302] CPU: Processor Core ID: 2
[ 0.473302] CPU4: Thermal monitoring enabled (TM2)
[ 0.473302] x86 PAT enabled: cpu 4, old 0x7040600070406, new 0x7010600070106
[ 0.556633] CPU4: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06
[ 0.563300] checking TSC synchronization [CPU#0 -> CPU#4]: passed.
[ 0.566633] Booting processor 5/6 ip 6000
[ 0.579962] Initializing CPU#5
[ 0.579962] Calibrating delay using timer specific routine.. 6386.09 BogoMIPS (lpj=10640155)
[ 0.579962] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.579962] CPU: L2 cache: 6144K
[ 0.579962] CPU 5/6 -> Node 0
[ 0.579962] CPU: Physical Processor ID: 1
[ 0.579962] CPU: Processor Core ID: 2
[ 0.579962] CPU5: Thermal monitoring enabled (TM2)
[ 0.579962] x86 PAT enabled: cpu 5, old 0x7040600070406, new 0x7010600070106
[ 0.663300] CPU5: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06
[ 0.669967] checking TSC synchronization [CPU#0 -> CPU#5]: passed.
[ 0.673300] Booting processor 6/3 ip 6000
[ 0.686621] Initializing CPU#6
[ 0.686621] Calibrating delay using timer specific routine.. 6386.08 BogoMIPS (lpj=10640131)
[ 0.686621] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.686621] CPU: L2 cache: 6144K
[ 0.686621] CPU 6/3 -> Node 0
[ 0.686621] CPU: Physical Processor ID: 0
[ 0.686621] CPU: Processor Core ID: 3
[ 0.686621] CPU6: Thermal monitoring enabled (TM2)
[ 0.686621] x86 PAT enabled: cpu 6, old 0x7040600070406, new 0x7010600070106
[ 0.769967] CPU6: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06
[ 0.776633] checking TSC synchronization [CPU#0 -> CPU#6]: passed.
[ 0.779967] Booting processor 7/7 ip 6000
[ 0.793281] Initializing CPU#7
[ 0.793281] Calibrating delay using timer specific routine.. 6386.11 BogoMIPS (lpj=10640183)
[ 0.793281] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.793281] CPU: L2 cache: 6144K
[ 0.793281] CPU 7/7 -> Node 0
[ 0.793281] CPU: Physical Processor ID: 1
[ 0.793281] CPU: Processor Core ID: 3
[ 0.793281] CPU7: Thermal monitoring enabled (TM2)
[ 0.793281] x86 PAT enabled: cpu 7, old 0x7040600070406, new 0x7010600070106
[ 0.876633] CPU7: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06
[ 0.883300] checking TSC synchronization [CPU#0 -> CPU#7]: passed.
[ 0.886633] Brought up 8 CPUs
[ 0.889809] Total of 8 processors activated (51093.73 BogoMIPS).
[ 0.893300] net_namespace: 864 bytes
[ 0.896633] xor: automatically using best checksumming function: generic_sse
[ 0.916224] generic_sse: 11872.800 MB/sec
[ 0.919967] xor: using function: generic_sse (11872.800 MB/sec)
[ 0.923300] NET: Registered protocol family 16
[ 0.926633] No dock devices found.
[ 0.929967] ACPI: bus type pci registered
[ 0.933300] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 8
[ 0.936633] PCI: MCFG area at e0000000 reserved in E820
[ 0.939967] PCI: Using MMCONFIG at e0000000 - e08fffff
[ 0.943300] PCI: Using configuration type 1 for base access
[ 0.949967] ACPI: EC: Look up EC in DSDT
[ 0.953300] ACPI: Interpreter enabled
[ 0.956633] ACPI: (supports S0 S3 S4 S5)
[ 0.959967] ACPI: Using IOAPIC for interrupt routing
[ 0.966633] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.969967] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 0.973300] pci 0000:00:00.0: PME# disabled
[ 0.976633] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.979967] pci 0000:00:01.0: PME# disabled
[ 0.983300] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 0.986633] pci 0000:00:05.0: PME# disabled
[ 0.989967] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 0.993300] pci 0000:00:09.0: PME# disabled
[ 0.996633] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.999967] pci 0000:00:1b.0: PME# disabled
[ 1.003300] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.006633] pci 0000:00:1c.0: PME# disabled
[ 1.009967] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 1.013300] pci 0000:00:1d.7: PME# disabled
[ 1.016633] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 1.016633] pci 0000:01:00.0: supports D1
[ 1.016633] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 1.019967] pci 0000:03:00.0: PME# disabled
[ 1.023300] pci 0000:03:00.3: PME# supported from D0 D3hot D3cold
[ 1.026633] pci 0000:03:00.3: PME# disabled
[ 1.029967] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[ 1.033300] pci 0000:04:00.0: PME# disabled
[ 1.036633] pci 0000:04:02.0: PME# supported from D0 D3hot D3cold
[ 1.039967] pci 0000:04:02.0: PME# disabled
[ 1.043300] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
[ 1.046633] pci 0000:06:00.0: PME# disabled
[ 1.049967] pci 0000:06:00.1: PME# supported from D0 D3hot D3cold
[ 1.053300] pci 0000:06:00.1: PME# disabled
[ 1.056633] pci 0000:09:05.0: supports D1
[ 1.056633] pci 0000:09:05.0: supports D2
[ 1.056633] pci 0000:09:06.0: supports D2
[ 1.056633] pci 0000:09:06.0: PME# supported from D2 D3hot D3cold
[ 1.059967] pci 0000:09:06.0: PME# disabled
[ 1.063300] pci 0000:00:1e.0: transparent bridge
[ 1.066633] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.067095] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 1.067267] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[ 1.067520] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 1.067855] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9.BMD0._PRT]
[ 1.068362] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9.BMD0.BPD0._PRT]
[ 1.068952] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9.BMD0.BPD2._PRT]
[ 1.069622] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9.BMF3._PRT]
[ 1.069967] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 1.069967] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 1.079967] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 14 15)
[ 1.086417] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 14 15)
[ 1.093100] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 14 15)
[ 1.096633] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 14 15)
[ 1.103092] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 14 15)
[ 1.109748] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 *11 14 15)
[ 1.116209] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 14 15)
[ 1.123091] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 10 11 14 15) *9
[ 1.129967] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 1.133300] pnp: PnP ACPI init
[ 1.136606] ACPI: bus type pnp registered
[ 1.143300] pnp: PnP ACPI: found 11 devices
[ 1.146633] ACPI: ACPI bus type pnp unregistered
[ 1.149967] SCSI subsystem initialized
[ 1.153300] libata version 3.00 loaded.
[ 1.153300] usbcore: registered new interface driver usbfs
[ 1.156633] usbcore: registered new interface driver hub
[ 1.159967] usbcore: registered new device driver usb
[ 1.163300] PCI: Using ACPI for IRQ routing
[ 1.182453] PCI-GART: No AMD northbridge found.
[ 1.186633] hpet clockevent registered
[ 1.186633] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 1.191225] hpet0: 3 64-bit timers, 14318180 Hz
[ 1.196633] ACPI: RTC can wake from S4
[ 1.206787] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 1.210124] system 00:01: ioport range 0x800-0x80f has been reserved
[ 1.216660] system 00:01: ioport range 0x1000-0x107f has been reserved
[ 1.223304] system 00:01: ioport range 0x1180-0x11bf has been reserved
[ 1.230025] system 00:01: ioport range 0xfe00-0xfe00 has been reserved
[ 1.236751] system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
[ 1.244580] system 00:01: iomem range 0xfee00000-0xfee0ffff could not be reserved
[ 1.252406] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 1.260230] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 1.267562] system 00:01: iomem range 0xfec88000-0xfec88fff has been reserved
[ 1.274894] system 00:01: iomem range 0xfe000000-0xfe01ffff has been reserved
[ 1.282225] system 00:01: iomem range 0xfe600000-0xfe6fffff has been reserved
[ 1.294506] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 1.296791] pci 0000:00:01.0: IO window: disabled
[ 1.301858] pci 0000:00:01.0: MEM window: 0xdc100000-0xdc1fffff
[ 1.308140] pci 0000:00:01.0: PREFETCH window: 0x000000d1000000-0x000000d10fffff
[ 1.316064] pci 0000:00:05.0: PCI bridge, secondary bus 0000:02
[ 1.322185] pci 0000:00:05.0: IO window: disabled
[ 1.327259] pci 0000:00:05.0: MEM window: disabled
[ 1.332419] pci 0000:00:05.0: PREFETCH window: disabled
[ 1.338019] pci 0000:04:00.0: PCI bridge, secondary bus 0000:05
[ 1.344139] pci 0000:04:00.0: IO window: disabled
[ 1.349215] pci 0000:04:00.0: MEM window: disabled
[ 1.354382] pci 0000:04:00.0: PREFETCH window: disabled
[ 1.359982] pci 0000:04:02.0: PCI bridge, secondary bus 0000:06
[ 1.366655] pci 0000:04:02.0: IO window: 0x2000-0x2fff
[ 1.372163] pci 0000:04:02.0: MEM window: 0xdc200000-0xdc2fffff
[ 1.378460] pci 0000:04:02.0: PREFETCH window: 0x000000d1100000-0x000000d11fffff
[ 1.386390] pci 0000:03:00.0: PCI bridge, secondary bus 0000:04
[ 1.392505] pci 0000:03:00.0: IO window: 0x2000-0x2fff
[ 1.398019] pci 0000:03:00.0: MEM window: 0xdc200000-0xdc2fffff
[ 1.404312] pci 0000:03:00.0: PREFETCH window: 0x000000d1100000-0x000000d11fffff
[ 1.412230] pci 0000:03:00.3: PCI bridge, secondary bus 0000:07
[ 1.418350] pci 0000:03:00.3: IO window: disabled
[ 1.423427] pci 0000:03:00.3: MEM window: disabled
[ 1.428588] pci 0000:03:00.3: PREFETCH window: disabled
[ 1.434184] pci 0000:00:09.0: PCI bridge, secondary bus 0000:03
[ 1.440304] pci 0000:00:09.0: IO window: 0x2000-0x2fff
[ 1.445813] pci 0000:00:09.0: MEM window: 0xdc200000-0xdc3fffff
[ 1.456277] pci 0000:00:09.0: PREFETCH window: 0x000000d1100000-0x000000d11fffff
[ 1.464201] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:08
[ 1.470313] pci 0000:00:1c.0: IO window: disabled
[ 1.475395] pci 0000:00:1c.0: MEM window: disabled
[ 1.480557] pci 0000:00:1c.0: PREFETCH window: disabled
[ 1.486173] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:09
[ 1.492293] pci 0000:00:1e.0: IO window: 0x3000-0x3fff
[ 1.497803] pci 0000:00:1e.0: MEM window: 0xdc000000-0xdc0fffff
[ 1.504090] pci 0000:00:1e.0: PREFETCH window: 0x000000d8000000-0x000000dbffffff
[ 1.512011] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.518911] pci 0000:00:01.0: setting latency timer to 64
[ 1.518917] pci 0000:00:05.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.525809] pci 0000:00:05.0: setting latency timer to 64
[ 1.525815] pci 0000:00:09.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.532718] pci 0000:00:09.0: setting latency timer to 64
[ 1.532725] pci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.539636] pci 0000:03:00.0: setting latency timer to 64
[ 1.539643] pci 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.546542] pci 0000:04:00.0: setting latency timer to 64
[ 1.546551] pci 0000:04:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.553447] pci 0000:04:02.0: setting latency timer to 64
[ 1.553455] pci 0000:03:00.3: setting latency timer to 64
[ 1.556782] pci 0000:00:1c.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 1.560356] pci 0000:00:1c.0: setting latency timer to 64
[ 1.560363] pci 0000:00:1e.0: setting latency timer to 64
[ 1.560380] NET: Registered protocol family 2
[ 1.598362] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.605434] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 1.616791] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.623135] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.630426] TCP reno registered
[ 1.643899] NET: Registered protocol family 1
[ 1.648674] checking if image is initramfs... it is
[ 1.749046] Freeing initrd memory: 1915k freed
[ 1.756055] Simple Boot Flag at 0x40 set to 0x80
[ 1.766066] audit: initializing netlink socket (disabled)
[ 1.766526] type=2000 audit(1219350940.763:1): initialized
[ 1.779499] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.789241] VFS: Disk quotas dquot_6.5.1
[ 1.796059] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.802377] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 1.809394] msgmni has been set to 6531
[ 1.812727] async_tx: api initialized (async)
[ 1.817410] io scheduler noop registered
[ 1.820520] io scheduler anticipatory registered
[ 1.824640] io scheduler deadline registered
[ 1.832001] io scheduler cfq registered (default)
[ 1.834045] pci 0000:09:05.0: Boot video device
[ 1.836062] pcieport-driver 0000:00:01.0: setting latency timer to 64
[ 1.836062] pcieport-driver 0000:00:01.0: found MSI capability
[ 1.842343] pci_express 0000:00:01.0:pcie00: allocate port service
[ 1.842729] pci_express 0000:00:01.0:pcie01: allocate port service
[ 1.842729] pcieport-driver 0000:00:05.0: setting latency timer to 64
[ 1.842729] pcieport-driver 0000:00:05.0: found MSI capability
[ 1.848664] pci_express 0000:00:05.0:pcie00: allocate port service
[ 1.849397] pci_express 0000:00:05.0:pcie01: allocate port service
[ 1.849397] pcieport-driver 0000:00:09.0: setting latency timer to 64
[ 1.849397] pcieport-driver 0000:00:09.0: found MSI capability
[ 1.854900] pci_express 0000:00:09.0:pcie00: allocate port service
[ 1.856064] pci_express 0000:00:09.0:pcie01: allocate port service
[ 1.856064] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 1.856064] pcieport-driver 0000:00:1c.0: found MSI capability
[ 1.861124] pci_express 0000:00:1c.0:pcie00: allocate port service
[ 1.862731] pci_express 0000:00:1c.0:pcie02: allocate port service
[ 1.862731] pci_express 0000:00:1c.0:pcie03: allocate port service
[ 1.862731] pcieport-driver 0000:03:00.0: setting latency timer to 64
[ 1.862731] pci_express 0000:03:00.0:pcie11: allocate port service
[ 1.862731] pcieport-driver 0000:04:00.0: setting latency timer to 64
[ 1.862731] pcieport-driver 0000:04:00.0: found MSI capability
[ 1.867353] Switched to high resolution mode on CPU 7
[ 1.867353] pci_express 0000:04:00.0:pcie21: allocate port service
[ 1.867070] Switched to high resolution mode on CPU 2
[ 1.869398] pcieport-driver 0000:04:02.0: setting latency timer to 64
[ 1.869398] pcieport-driver 0000:04:02.0: found MSI capability
[ 1.869398] Switched to high resolution mode on CPU 3
[ 1.866687] Switched to high resolution mode on CPU 1
[ 1.869398] Switched to high resolution mode on CPU 6
[ 1.869336] Switched to high resolution mode on CPU 4
[ 1.869764] Switched to high resolution mode on CPU 5
[ 1.869987] Switched to high resolution mode on CPU 0
[ 1.870468] pci_express 0000:04:02.0:pcie21: allocate port service
[ 2.057905] aer 0000:00:01.0:pcie01: AER service couldn't init device: no _OSC support
[ 2.057905] aer 0000:00:05.0:pcie01: AER service couldn't init device: no _OSC support
[ 2.057905] aer 0000:00:09.0:pcie01: AER service couldn't init device: no _OSC support
[ 2.057905] input: Power Button (FF) as /class/input/input0
[ 2.057905] ACPI: Power Button (FF) [PWRF]
[ 2.057905] input: Power Button (CM) as /class/input/input1
[ 2.057905] ACPI: Power Button (CM) [PWRB]
[ 2.057905] ACPI: SSDT CFF04DBE, 01DD (r1 PmRef Cpu0Ist 3000 INTL 20050228)
[ 2.057905] processor ACPI0007:00: registered as cooling_device0
[ 2.057905] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 2.057905] ACPI: SSDT CFF04F9B, 016E (r1 PmRef Cpu1Ist 3000 INTL 20050228)
[ 2.057905] processor ACPI0007:01: registered as cooling_device1
[ 2.057905] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 2.057905] ACPI: SSDT CFF05109, 016E (r1 PmRef Cpu2Ist 3000 INTL 20050228)
[ 2.057905] processor ACPI0007:02: registered as cooling_device2
[ 2.057905] ACPI: Processor [CPU2] (supports 8 throttling states)
[ 2.057905] ACPI: SSDT CFF05277, 016E (r1 PmRef Cpu3Ist 3000 INTL 20050228)
[ 2.057905] processor ACPI0007:03: registered as cooling_device3
[ 2.057905] ACPI: Processor [CPU3] (supports 8 throttling states)
[ 2.057905] ACPI: SSDT CFF053E5, 016E (r1 PmRef CPU4Ist 3000 INTL 20050228)
[ 2.057906] processor ACPI0007:04: registered as cooling_device4
[ 2.057906] ACPI: Processor [CPU4] (supports 8 throttling states)
[ 2.057906] ACPI: SSDT CFF05553, 016E (r1 PmRef CPU5Ist 3000 INTL 20050228)
[ 2.057906] processor ACPI0007:05: registered as cooling_device5
[ 2.057906] ACPI: Processor [CPU5] (supports 8 throttling states)
[ 2.057906] ACPI: SSDT CFF056C1, 016E (r1 PmRef Cpu6Ist 3000 INTL 20050228)
[ 2.057906] processor ACPI0007:06: registered as cooling_device6
[ 2.057906] ACPI: Processor [CPU6] (supports 8 throttling states)
[ 2.057906] ACPI: SSDT CFF0582F, 016E (r1 PmRef Cpu7Ist 3000 INTL 20050228)
[ 2.057906] processor ACPI0007:07: registered as cooling_device7
[ 2.059010] ACPI: Processor [CPU7] (supports 8 throttling states)
[ 2.127920] Non-volatile memory driver v1.2
[ 2.137073] intel_rng: FWH not detected
[ 2.137655] Linux agpgart interface v0.103
[ 2.142568] Serial: 8250/16550 driver4 ports, IRQ sharing disabled
[ 2.149464] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.155797] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 2.162133] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.168478] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 2.190625] FDC 0 is a post-1991 82077
[ 2.196818] brd: module loaded
[ 2.200798] loop: module loaded
[ 2.203969] tun: Universal TUN/TAP device driver, 1.6
[ 2.207954] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 2.216078] console [netcon0] enabled
[ 2.220046] netconsole: network logging started
[ 2.223557] Uniform Multi-Platform E-IDE driver
[ 2.229458] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
[ 2.239618] Probing IDE interface ide0...
[ 2.938159] hda: Optiarc DVD RW AD-7590A, ATAPI CD/DVD-ROM drive
[ 3.584497] Probing IDE interface ide1...
[ 4.117883] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 4.120417] ide1 at 0x170-0x177,0x376 on irq 15
[ 4.127680] hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 974kB Cache
[ 4.135328] Uniform CD-ROM driver Revision: 3.20
[ 6.730957] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[ 6.739681] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[ 6.748200] megasas: 00.00.03.20-rc1 Mon. March 10 11:02:31 PDT 2008
[ 6.755287] Driver 'sd' needs updating - please use bus_type methods
[ 6.761939] Driver 'sr' needs updating - please use bus_type methods
[ 6.768535] ata_piix 0000:00:1f.1: version 2.12
[ 6.768535] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 6.775217] ata_piix 0000:00:1f.1: BAR 0: can't reserve I/O region [0x1f0-0x1f7]
[ 6.782752] ata_piix 0000:00:1f.1: failed to request/iomap BARs for port 0 (errno=-16)
[ 6.790999] ata_piix 0000:00:1f.1: BAR 2: can't reserve I/O region [0x170-0x177]
[ 6.798722] ata_piix 0000:00:1f.1: failed to request/iomap BARs for port 1 (errno=-16)
[ 6.806962] ata_piix 0000:00:1f.1: no available native port
[ 6.814584] Fusion MPT base driver 3.04.07
[ 6.817295] Copyright (c) 1999-2008 LSI Corporation
[ 6.821978] Fusion MPT SPI Host driver 3.04.07
[ 6.828279] Fusion MPT SAS Host driver 3.04.07
[ 6.834584] ohci1394 0000:09:06.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 6.890635] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[dc040000-dc0407ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 6.913818] ieee1394: raw1394: /dev/raw1394 device initialized
[ 6.917291] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 6.923965] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 6.923974] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 6.930097] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 6.940624] ehci_hcd 0000:00:1d.7: debug port 1
[ 6.943963] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 6.943975] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xdc608000
[ 6.963958] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 6.971250] usb usb1: configuration #1 chosen from 1 choice
[ 6.974979] hub 1-0:1.0: USB hub found
[ 6.978985] hub 1-0:1.0: 8 ports detected
[ 7.087911] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 7.087911] USB Universal Host Controller Interface driver v3.0
[ 7.090032] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 7.099763] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 7.099770] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 7.105905] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 7.113756] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001800
[ 7.119781] usb usb2: configuration #1 chosen from 1 choice
[ 7.127916] hub 2-0:1.0: USB hub found
[ 7.128922] hub 2-0:1.0: 2 ports detected
[ 7.237910] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 7.243340] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 7.243347] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 7.249619] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 7.257487] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00001820
[ 7.264583] usb usb3: configuration #1 chosen from 1 choice
[ 7.268605] hub 3-0:1.0: USB hub found
[ 7.272675] hub 3-0:1.0: 2 ports detected
[ 7.381244] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 7.386677] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 7.386687] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 7.392948] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 7.400814] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00001840
[ 7.409047] usb usb4: configuration #1 chosen from 1 choice
[ 7.411620] hub 4-0:1.0: USB hub found
[ 7.416665] hub 4-0:1.0: 2 ports detected
[ 7.524577] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 7.530006] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 7.530013] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 7.536277] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 7.544152] uhci_hcd 0000:00:1d.3: irq 23, io base 0x00001860
[ 7.552385] usb usb5: configuration #1 chosen from 1 choice
[ 7.555258] hub 5-0:1.0: USB hub found
[ 7.559263] hub 5-0:1.0: 2 ports detected
[ 7.667910] usbcore: registered new interface driver usblp
[ 7.670009] Initializing USB Mass Storage driver...
[ 7.679164] usbcore: registered new interface driver usb-storage
[ 7.684364] USB Mass Storage support registered.
[ 7.688774] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 7.706666] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 7.707299] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 7.713958] mice: PS/2 mouse device common for all mice
[ 8.083323] md: linear personality registered for level -1
[ 8.083327] md: raid0 personality registered for level 0
[ 8.089095] md: raid1 personality registered for level 1
[ 8.094588] md: raid10 personality registered for level 10
[ 8.156666] raid6: int64x1 2955 MB/s
[ 8.190623] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e08100002824f8]
[ 8.217233] raid6: int64x2 3537 MB/s
[ 8.276666] raid6: int64x4 3438 MB/s
[ 8.336666] raid6: int64x8 2310 MB/s
[ 8.396667] raid6: sse2x1 3699 MB/s
[ 8.456666] raid6: sse2x2 7339 MB/s
[ 8.516666] raid6: sse2x4 8744 MB/s
[ 8.520001] raid6: using algorithm sse2x4 (8744 MB/s)
[ 8.524573] md: raid6 personality registered for level 6
[ 8.530066] md: raid5 personality registered for level 5
[ 8.535567] md: raid4 personality registered for level 4
[ 8.540833] md: multipath personality registered for level -4
[ 8.550392] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 8.558945] cpuidle: using governor ladder
[ 8.561311] cpuidle: using governor menu
[ 8.565682] usbcore: registered new interface driver usbhid
[ 8.571516] usbhid: v2.6:USB HID core driver
[ 8.580208] oprofile: using NMI interrupt.
[ 8.580421] TCP cubic registered
[ 8.586874] NET: Registered protocol family 10
[ 8.588544] IPv6 over IPv4 tunneling driver
[ 8.596875] NET: Registered protocol family 17
[ 8.600208] RPC: Registered udp transport module.
[ 8.605577] RPC: Registered tcp transport module.
[ 8.611255] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 8.617963] Freeing unused kernel memory: 672k freed
[ 8.621765] Write protecting the kernel read-only data: 5536k
[ 8.863538] arcmsr 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8.863538] arcmsr 0000:01:00.0: setting latency timer to 64
[ 8.876862] ARECA RAID ADAPTER0: FIRMWARE VERSION V1.44 2008-1-31
[ 8.890209] scsi0 : Areca SATA Host Adapter RAID Controller( RAID6 capable)
[ 8.890209] Driver Version 1.20.00.15 2008/02/27
[ 8.891249] scsi 0:0:0:0: Direct-Access Areca ARC-1280-VOL#00 R001 PQ: 0 ANSI: 5
[ 8.891041] sd 0:0:0:0: [sda] Very big device. Trying to use READ CAPACITY(16).
[ 8.890625] sd 0:0:0:0: [sda] 42968747008 512-byte hardware sectors (21999998 MB)
[ 8.891458] sd 0:0:0:0: [sda] Write Protect is off
[ 8.891458] sd 0:0:0:0: [sda] Mode Sense: cb 00 00 08
[ 8.890833] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.893749] sd 0:0:0:0: [sda] Very big device. Trying to use READ CAPACITY(16).
[ 8.893749] sd 0:0:0:0: [sda] 42968747008 512-byte hardware sectors (21999998 MB)
[ 8.891041] sd 0:0:0:0: [sda] Write Protect is off
[ 8.891041] sd 0:0:0:0: [sda] Mode Sense: cb 00 00 08
[ 8.891458] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.891458] sda: sda1 sda2 sda3 sda4
[ 9.288125] sd 0:0:0:0: [sda] Attached SCSI disk
[ 9.288125] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 9.288125] scsi 0:0:16:0: Processor Areca RAID controller R001 PQ: 0 ANSI: 0
[ 9.288125] scsi 0:0:16:0: Attached scsi generic sg1 type 3
[ 9.357920] 3ware Storage Controller device driver for Linux v1.26.02.002.
[ 9.369999] 3ware 9000 Storage Controller device driver for Linux v2.26.02.011.
[ 9.384166] Adaptec aacraid driver 1.1-5[2456]-ms
[ 9.491458] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
[ 9.491459] SGI XFS Quota Management subsystem
[ 9.507917] Intel(R) PRO/1000 Network Driver - version 7.3.20-k3-NAPI
[ 9.507917] Copyright (c) 1999-2006 Intel Corporation.
[ 13.719989] kjournald starting. Commit interval 5 seconds
[ 13.719989] EXT3-fs: mounted filesystem with ordered data mode.
[ 22.084790] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
[ 22.084790] iTCO_wdt: Found a 631xESB/632xESB TCO device (Version=2, TCOBASE=0x1060)
[ 22.084790] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 22.088581] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k2
[ 22.088581] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 22.088581] e1000e 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 22.088581] e1000e 0000:06:00.0: setting latency timer to 64
[ 22.104790] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 22.163954] 0000:06:00.0: eth0: (PCI Express:2.5GB/s:Width x4) 00:e0:81:b0:84:14
[ 22.163954] 0000:06:00.0: eth0: Intel(R) PRO/1000 Network Connection
[ 22.163954] 0000:06:00.0: eth0: MAC: 3, PHY: 5, PBA No: ffffff-0ff
[ 22.163954] e1000e 0000:06:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 22.163954] e1000e 0000:06:00.1: setting latency timer to 64
[ 22.240623] 0000:06:00.1: eth1: (PCI Express:2.5GB/s:Width x4) 00:e0:81:b0:84:15
[ 22.240623] 0000:06:00.1: eth1: Intel(R) PRO/1000 Network Connection
[ 22.240623] 0000:06:00.1: eth1: MAC: 3, PHY: 5, PBA No: ffffff-0ff
[ 116.458114] EXT3 FS on sda3, internal journal
[ 116.601448] SMsC 37B787 watchdog component driver 1.1 initialising...
[ 116.601448] smsc37b787_wdt: Unable to register miscdev on minor 130
[ 117.221031] XFS mounting filesystem sda4
[ 117.301234] Ending clean XFS mount for filesystem: sda4
[ 117.421000] Adding 31999992k swap on /dev/sda2. Priority:-1 extents:1 across:31999992k
[ 120.787905] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 123.537072] 0000:06:00.0: eth0: Link is Up 1000 Mbps Full Duplex, Flow Control: None
[ 123.540197] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 134.356662] eth0: no IPv6 routers present
[ 155.953259] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 155.953944] NFSD: starting 90-second grace period
next prev parent reply other threads:[~2008-08-21 20:56 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <bug-11388-27@http.bugzilla.kernel.org/>
2008-08-21 1:04 ` [Bug 11388] New: 2.6.27-rc3 warns about MTRR range; only 3 of 16gb of memory is usable Andrew Morton
2008-08-21 1:20 ` Yinghai Lu
2008-08-21 1:49 ` Yinghai Lu
2008-08-21 11:44 ` Ingo Molnar
2008-08-21 11:56 ` Ingo Molnar
2008-08-21 15:39 ` Yinghai Lu
2008-08-22 3:51 ` Ingo Molnar
2008-08-22 4:45 ` Yinghai Lu
2008-08-21 20:55 ` Joshua Hoblitt [this message]
2008-08-21 21:51 ` Yinghai Lu
2008-08-21 23:33 ` Joshua Hoblitt
2008-08-22 0:10 ` Joshua Hoblitt
2008-08-22 0:28 ` Yinghai Lu
2008-08-22 0:29 ` Joshua Hoblitt
2008-08-22 1:00 ` Joshua Hoblitt
2008-08-22 1:10 ` Joshua Hoblitt
2008-08-22 1:55 ` Yinghai Lu
2008-08-22 2:15 ` Joshua Hoblitt
2008-08-22 2:26 ` Yinghai Lu
2008-08-22 3:24 ` Yinghai Lu
2008-08-22 3:50 ` Ingo Molnar
2008-08-22 3:56 ` Ingo Molnar
2008-08-22 4:48 ` Yinghai Lu
2008-08-23 0:22 ` Joshua Hoblitt
2008-08-23 5:52 ` Yinghai Lu
2008-08-23 10:43 ` Ingo Molnar
2008-08-26 8:35 ` Joshua Hoblitt
2008-08-26 8:42 ` Ingo Molnar
2008-08-25 21:43 ` Joshua Hoblitt
2008-08-22 6:16 ` Yinghai Lu
2008-08-22 6:24 ` Ingo Molnar
2008-08-23 23:53 ` Arjan van de Ven
2008-08-25 9:17 ` Ingo Molnar
2008-08-22 3:26 ` Joshua Hoblitt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080821205558.GC23377@hoblitt.com \
--to=josh@hoblitt.com \
--cc=akpm@linux-foundation.org \
--cc=bugme-daemon@bugzilla.kernel.org \
--cc=j_kernel@hoblitt.com \
--cc=linux-kernel@vger.kernel.org \
--cc=yhlu.kernel@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.