From: Joshua Hoblitt <josh@hoblitt.com>
To: Ingo Molnar <mingo@elte.hu>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>,
Andrew Morton <akpm@linux-foundation.org>,
bugme-daemon@bugzilla.kernel.org, linux-kernel@vger.kernel.org,
j_kernel@hoblitt.com
Subject: Re: [Bug 11388] New: 2.6.27-rc3 warns about MTRR range; only 3 of 16gb of memory is usable
Date: Mon, 25 Aug 2008 11:43:19 -1000 [thread overview]
Message-ID: <20080825214319.GC12156@hoblitt.com> (raw)
In-Reply-To: <20080822035609.GD30284@elte.hu>
[-- Attachment #1: Type: text/plain, Size: 881 bytes --]
I repulled/rebuilding the tip tree this morning. I can confirm that the
show_msr patch is working and mtrr masking patch is now only printing a
single warning in the dmesg. The dmesg is attached.
As per usual, the kernel folks provide the best support of any software
in history. Thanks guys!
-J
--
On Fri, Aug 22, 2008 at 05:56:09AM +0200, Ingo Molnar wrote:
>
> * Ingo Molnar <mingo@elte.hu> wrote:
>
> > i've tidied up your patch (see the commit below) and have queued it up
> > in x86/urgent. It seems fairly safe and i guess we can push it to
> > v2.6.27 if Joshua reports test success. Joshua, could you give it a go
> > please?
>
> or just try the latest tip/master - please check whether you are getting
> the right amount of RAM out of box plus this warning message:
>
> > WARN_ON("mtrr: your BIOS has set up an incorrect mask, fixing it up.\n");
>
> Ingo
[-- Attachment #2: 2.6.27-rc4-tip-00345-g8c8b7ed.dmesg --]
[-- Type: text/plain, Size: 57093 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Linux version 2.6.27-rc4-tip-00345-g8c8b7ed (root@ipp000) (gcc version 4.1.2 (Gentoo 4.1.2 p1.1)) #1 SMP Mon Aug 25 10:36:23 HST 2008
[ 0.000000] Command line: root=/dev/ram0 real_root=/dev/sda3 init=/linuxrc show_msr=1 console=tty0 console=ttyS0,115200n8
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e400 (usable)
[ 0.000000] BIOS-e820: 000000000009e400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000ca000 - 00000000000cc000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cff00000 (usable)
[ 0.000000] BIOS-e820: 00000000cff00000 - 00000000cff0a000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cff0a000 - 00000000cff0b000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cff0b000 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000430000000 (usable)
[ 0.000000] last_pfn = 0x430000 max_arch_pfn = 0x3ffffffff
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] mtrr: your BIOS has set up an incorrect mask, fixing it up.
[ 0.000000] last_pfn = 0xcff00 max_arch_pfn = 0x3ffffffff
[ 0.000000] init_memory_mapping
[ 0.000000] 0000000000 - 00cfe00000 page 2M
[ 0.000000] 00cfe00000 - 00cff00000 page 4k
[ 0.000000] kernel direct mapping tables up to cff00000 @ 8000-e000
[ 0.000000] last_map_addr: cff00000 end: cff00000
[ 0.000000] init_memory_mapping
[ 0.000000] 0100000000 - 0430000000 page 2M
[ 0.000000] kernel direct mapping tables up to 430000000 @ c000-1e000
[ 0.000000] last_map_addr: 430000000 end: 430000000
[ 0.000000] RAMDISK: 37e10000 - 37fef782
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP 000F7020, 0024 (r2 PTLTD )
[ 0.000000] ACPI: XSDT CFF0395D, 005C (r1 PTLTD XSDT 6040000 LTP 0)
[ 0.000000] ACPI: FACP CFF09D60, 00F4 (r3 INTEL TUMWATER 6040000 PTL 3)
[ 0.000000] ACPI: DSDT CFF0599D, 434F (r1 Intel SEABURG 6040000 MSFT 3000000)
[ 0.000000] ACPI: FACS CFF0AFC0, 0040
[ 0.000000] ACPI: _MAR CFF09E54, 0030 (r1 Intel OEMDMAR 6040000 LOHR 1)
[ 0.000000] ACPI: APIC CFF09E84, 00C8 (r1 PTLTD APIC 6040000 LTP 0)
[ 0.000000] ACPI: MCFG CFF09F4C, 003C (r1 PTLTD MCFG 6040000 LTP 0)
[ 0.000000] ACPI: BOOT CFF09F88, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
[ 0.000000] ACPI: SPCR CFF09FB0, 0050 (r1 PTLTD $UCRTBL$ 6040000 PTL 1)
[ 0.000000] ACPI: SSDT CFF039B9, 1405 (r1 PmRef CpuPm 3000 INTL 20050228)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000430000000
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000430000000
[ 0.000000] NODE_DATA [0000000000019000 - 0000000000023fff]
[ 0.000000] bootmap [0000000000100000 - 0000000000185fff] pages 86
[ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 0430000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0000200000 - 00009bfef0] TEXT DATA BSS ==> [0000200000 - 00009bfef0]
[ 0.000000] #3 [0037e10000 - 0037fef782] RAMDISK ==> [0037e10000 - 0037fef782]
[ 0.000000] #4 [000009e400 - 0000100000] BIOS reserved ==> [000009e400 - 0000100000]
[ 0.000000] #5 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000]
[ 0.000000] #6 [000000c000 - 0000019000] PGTABLE ==> [000000c000 - 0000019000]
[ 0.000000] found SMP MP-table at [ffff8800000f7050] 000f7050
[ 0.000000] [ffffe20000000000-ffffe200107fffff] PMD -> [ffff880028200000-ffff880037dfffff] on node 0
[ 0.000000] [ffffe20010800000-ffffe20010bfffff] PMD -> [ffff880038000000-ffff8800383fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00430000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x000cff00
[ 0.000000] 0: 0x00100000 -> 0x00430000
[ 0.000000] On node 0 totalpages: 4193950
[ 0.000000] DMA zone: 1832 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 831296 pages, LIFO batch:31
[ 0.000000] Normal zone: 3290112 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec88000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 9, version 0, address 0xfec88000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000ca000
[ 0.000000] PM: Registered nosave memory: 00000000000ca000 - 00000000000cc000
[ 0.000000] PM: Registered nosave memory: 00000000000cc000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cff00000 - 00000000cff0a000
[ 0.000000] PM: Registered nosave memory: 00000000cff0a000 - 00000000cff0b000
[ 0.000000] PM: Registered nosave memory: 00000000cff0b000 - 00000000d0000000
[ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
[ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at d1000000 (gap: d0000000:10000000)
[ 0.000000] dyn_array irq_2_pin_head+0x0/0x418 size:0x10 nr:256 align:0x1000
[ 0.000000] dyn_array irq_cfgx+0x0/0x8 size:0x30 nr:32 align:0x1000
[ 0.000000] dyn_array sparse_irqs+0x0/0x8 size:0x100 nr:32 align:0x1000
[ 0.000000] dyn_array total_size: 0x4000
[ 0.000000] dyn_array irq_2_pin_head+0x0/0x418 ==> [0x28034000 - 0x28035000]
[ 0.000000] dyn_array irq_cfgx+0x0/0x8 ==> [0x28035000 - 0x28035600]
[ 0.000000] dyn_array sparse_irqs+0x0/0x8 ==> [0x28036000 - 0x28038000]
[ 0.000000] kstat_irqs ==> [0x28038000 - 0x28038400]
[ 0.000000] PERCPU: Allocating 49152 bytes of per cpu data
[ 0.000000] per cpu data for cpu0 on node0 at 0000000028039000
[ 0.000000] per cpu data for cpu1 on node0 at 0000000028045000
[ 0.000000] per cpu data for cpu2 on node0 at 0000000028051000
[ 0.000000] per cpu data for cpu3 on node0 at 000000002805d000
[ 0.000000] per cpu data for cpu4 on node0 at 0000000028069000
[ 0.000000] per cpu data for cpu5 on node0 at 0000000028075000
[ 0.000000] per cpu data for cpu6 on node0 at 0000000028081000
[ 0.000000] per cpu data for cpu7 on node0 at 000000002808d000
[ 0.000000] NR_CPUS: 32, nr_cpu_ids: 8, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4123240
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/ram0 real_root=/dev/sda3 init=/linuxrc show_msr=1 console=tty0 console=ttyS0,115200n8
[ 0.000000] Initializing CPU#0
[ 0.000000] found new irq_desc for irq 0
[ 0.000000] found new irq_desc for irq 1
[ 0.000000] found new irq_desc for irq 2
[ 0.000000] found new irq_desc for irq 3
[ 0.000000] found new irq_desc for irq 4
[ 0.000000] found new irq_desc for irq 5
[ 0.000000] found new irq_desc for irq 6
[ 0.000000] found new irq_desc for irq 7
[ 0.000000] found new irq_desc for irq 8
[ 0.000000] found new irq_desc for irq 9
[ 0.000000] found new irq_desc for irq 10
[ 0.000000] found new irq_desc for irq 11
[ 0.000000] found new irq_desc for irq 12
[ 0.000000] found new irq_desc for irq 13
[ 0.000000] found new irq_desc for irq 14
[ 0.000000] found new irq_desc for irq 15
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] TSC calibrated against PM_TIMER
[ 0.000000] Detected 3192.010 MHz processor.
[ 0.003333] Console: colour VGA+ 80x25
[ 0.003333] console [tty0] enabled
[ 0.003333] console [ttyS0] enabled
[ 0.003333] Checking aperture...
[ 0.003333] No AGP bridge found
[ 0.003333] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.003333] Placing software IO TLB between 0x20000000 - 0x24000000
[ 0.003333] Memory: 16436776k/17563648k available (3831k kernel code, 339024k reserved, 2175k data, 676k init)
[ 0.003333] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.003333] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.003341] Calibrating delay loop (skipped), value calculated using timer frequency.. 6386.02 BogoMIPS (lpj=10640033)
[ 0.010017] Security Framework initialized
[ 0.016879] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.027256] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.034238] Mount-cache hash table entries: 256
[ 0.036819] Initializing cgroup subsys ns
[ 0.040003] Initializing cgroup subsys cpuacct
[ 0.043333] Initializing cgroup subsys memory
[ 0.046668] Initializing cgroup subsys devices
[ 0.050006] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.055184] CPU: L2 cache: 6144K
[ 0.056665] CPU 0/0 -> Node 0
[ 0.059998] CPU: Physical Processor ID: 0
[ 0.063330] CPU: Processor Core ID: 0
[ 0.066667] CPU0: Thermal monitoring enabled (TM2)
[ 0.069997] using mwait in idle threads.
[ 0.073345] ACPI: Core revision 20080609
[ 0.083380] Setting APIC routing to flat
[ 0.090076] 0 add_pin_to_irq: irq 1 --> apic 0 pin 1
[ 0.090081] 0 add_pin_to_irq: irq 0 --> apic 0 pin 2
[ 0.090083] 0 add_pin_to_irq: irq 3 --> apic 0 pin 3
[ 0.090086] 0 add_pin_to_irq: irq 4 --> apic 0 pin 4
[ 0.090089] 0 add_pin_to_irq: irq 5 --> apic 0 pin 5
[ 0.090091] 0 add_pin_to_irq: irq 6 --> apic 0 pin 6
[ 0.090093] 0 add_pin_to_irq: irq 7 --> apic 0 pin 7
[ 0.090096] 0 add_pin_to_irq: irq 8 --> apic 0 pin 8
[ 0.090098] 0 add_pin_to_irq: irq 9 --> apic 0 pin 9
[ 0.090101] 0 add_pin_to_irq: irq 10 --> apic 0 pin 10
[ 0.090104] 0 add_pin_to_irq: irq 11 --> apic 0 pin 11
[ 0.090106] 0 add_pin_to_irq: irq 12 --> apic 0 pin 12
[ 0.090109] 0 add_pin_to_irq: irq 13 --> apic 0 pin 13
[ 0.090111] 0 add_pin_to_irq: irq 14 --> apic 0 pin 14
[ 0.090114] 0 add_pin_to_irq: irq 15 --> apic 0 pin 15
[ 0.090247] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.129455] CPU0: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06
[ 0.136658] MSR00000000: 00000000cff69380
[ 0.139991] MSR00000001: 0000000000000000
[ 0.143327] MSR00000006: 0000000000000040
[ 0.146661] MSR00000010: 00000041ff91fb10
[ 0.149993] MSR00000017: 0018000088e40822
[ 0.153325] MSR0000001b: 00000000fee00900
[ 0.156659] MSR00000021: 0000000000000001
[ 0.159993] MSR0000002a: 00000000c208149e
[ 0.163326] MSR00000032: 0000000000000000
[ 0.166656] MSR00000033: 0000000000000000
[ 0.169991] MSR00000039: 0000000000000000
[ 0.173322] MSR0000003a: 000000000000000d
[ 0.176657] MSR0000003f: 0000000000000000
[ 0.179989] MSR00000040: ffffffff805af2f3
[ 0.183322] MSR00000041: ffffffff8020c348
[ 0.186655] MSR00000042: ffffffff802380fc
[ 0.189988] MSR00000043: ffffffff8020c348
[ 0.193332] MSR00000060: ffffffff805af2cc
[ 0.196654] MSR00000061: ffffffff802380eb
[ 0.199987] MSR00000062: ffffffff805af2c1
[ 0.203320] MSR00000063: ffffffff802380eb
[ 0.206668] MSR0000008b: 0000060600000000
[ 0.209992] MSR0000009b: 0000000000000000
[ 0.213321] MSR000000a0: 00000000cff80000
[ 0.216653] MSR000000a1: 00000000fff80800
[ 0.219989] MSR000000a8: 000000000000061a
[ 0.223319] MSR000000a9: 000000000000061a
[ 0.226652] MSR000000aa: 000000000000061a
[ 0.229985] MSR000000ab: 000000000000061a
[ 0.233318] MSR000000ac: 000000000000061a
[ 0.236652] MSR000000ad: 000000000000061a
[ 0.239992] MSR000000c1: 0000000000000000
[ 0.243318] MSR000000c2: 0000000000000000
[ 0.246653] MSR000000c7: 130000004c000000
[ 0.249986] MSR000000cd: 0000000000000806
[ 0.253317] MSR000000ce: 001a08227f7f071a
[ 0.256650] MSR000000cf: 0000000000000000
[ 0.259990] MSR000000e0: 00000000018bc0f0
[ 0.263316] MSR000000e1: 00000000f0f00000
[ 0.266650] MSR000000e2: 0000000002262201
[ 0.269983] MSR000000e3: 0000000000000000
[ 0.273316] MSR000000e4: 0000000000000000
[ 0.276649] MSR000000e5: 00000000d00208c8
[ 0.279982] MSR000000e7: 000000421f188350
[ 0.283315] MSR000000e8: 000000421fe966d0
[ 0.286650] MSR000000ee: 04000000877d4b01
[ 0.289987] MSR000000fe: 0000000000000d07
[ 0.293323] MSR00000116: 0000000000003fc0
[ 0.296648] MSR00000118: 00000000000bfffd
[ 0.299982] MSR0000011b: 0000000000000000
[ 0.303314] MSR0000011c: 00000000e000000c
[ 0.306647] MSR0000011e: 00000000be702111
[ 0.309998] MSR0000014e: 000000006fe76e2f
[ 0.313313] MSR0000014f: 00000000f7bef7ff
[ 0.316647] MSR00000151: 00000000ad123a00
[ 0.319984] MSR0000015e: 0000000000000006
[ 0.323313] MSR0000015f: 00000000001c0822
[ 0.326653] MSR00000174: 0000000000000010
[ 0.329979] MSR00000175: 0000000000000000
[ 0.333312] MSR00000176: ffffffff80228960
[ 0.336646] MSR00000179: 0000000000000806
[ 0.339978] MSR0000017a: 0000000000000000
[ 0.343315] MSR00000186: 0000000000000000
[ 0.346644] MSR00000187: 0000000000000000
[ 0.349982] MSR00000193: 0000000000000000
[ 0.353311] MSR00000194: 0000000000000522
[ 0.356645] MSR00000198: 0822082206000822
[ 0.359977] MSR00000199: 0000000000000822
[ 0.363310] MSR0000019a: 0000000000000002
[ 0.366643] MSR0000019b: 0000000000000003
[ 0.369976] MSR0000019c: 00000000882a0000
[ 0.373309] MSR0000019d: 000000000000061a
[ 0.376642] MSR0000019e: 0000000006010000
[ 0.379976] MSR0000019f: 0000000000000000
[ 0.383309] MSR000001a0: 00000060669d2489
[ 0.386642] MSR000001a1: 0000000000000000
[ 0.389975] MSR000001a2: 0000000000001000
[ 0.393311] MSR000001aa: 00000000fe7f042f
[ 0.396649] MSR000001bf: 0000000000000404
[ 0.399978] MSR000001c9: 0000000000000002
[ 0.403311] MSR000001d3: 0000000000008000
[ 0.406642] MSR000001d9: 0000000000000001
[ 0.409974] MSR000001db: ffffffff805af2f3
[ 0.413307] MSR000001dc: ffffffff805af2c1
[ 0.416640] MSR000001dd: ffffffff802380ca
[ 0.419973] MSR000001de: ffffffff802380e6
[ 0.423306] MSR000001e0: 0000000000000ff0
[ 0.426648] MSR000001f8: 0000000000000001
[ 0.429972] MSR000001f9: 0000000000000001
[ 0.433305] MSR000001fa: 0000000000008c89
[ 0.436640] MSR00000200: 00000000d0000000
[ 0.439972] MSR00000201: 0000000ff0000800
[ 0.443305] MSR00000202: 00000000e0000000
[ 0.446638] MSR00000203: 0000000fe0000800
[ 0.449971] MSR00000204: 0000000000000006
[ 0.453304] MSR00000205: 0000000c00000800
[ 0.456637] MSR00000206: 0000000400000006
[ 0.459970] MSR00000207: 0000000fe0000800
[ 0.463303] MSR00000208: 0000000420000006
[ 0.466637] MSR00000209: 0000000ff0000800
[ 0.469970] MSR0000020a: 0000000000000000
[ 0.473303] MSR0000020b: 0000000000000000
[ 0.476636] MSR0000020c: 0000000000000000
[ 0.479969] MSR0000020d: 0000000000000000
[ 0.483328] MSR00000250: 0606060606060606
[ 0.486638] MSR00000258: 0606060606060606
[ 0.489968] MSR00000259: 0000000000000000
[ 0.493307] MSR00000268: 0505050505050505
[ 0.496635] MSR00000269: 0505050505050505
[ 0.499968] MSR0000026a: 0000000000000000
[ 0.503301] MSR0000026b: 0000000000000000
[ 0.506634] MSR0000026c: 0505050505050505
[ 0.509968] MSR0000026d: 0505050505050505
[ 0.513301] MSR0000026e: 0505050505050505
[ 0.516634] MSR0000026f: 0505050505050505
[ 0.519970] MSR00000277: 0007010600070106
[ 0.523353] MSR000002ff: 0000000000000c00
[ 0.526638] MSR00000309: 0000000000000000
[ 0.529968] MSR0000030a: 0000000000000000
[ 0.533301] MSR0000030b: 0000000000000000
[ 0.536656] MSR00000345: 00000000000010c2
[ 0.539995] MSR0000038d: 0000000000000000
[ 0.543301] MSR0000038e: 0000000000000000
[ 0.546634] MSR0000038f: ffffffffffffffff
[ 0.549968] MSR00000390: ffffffffffffffff
[ 0.553338] MSR000003f1: 0000000000000000
[ 0.556640] MSR00000400: 00000000c208149e
[ 0.559968] MSR00000401: 1000000000000000
[ 0.563301] MSR00000402: 0000000000000000
[ 0.566635] MSR00000404: 0000000000000001
[ 0.569968] MSR00000405: 0000000000000000
[ 0.573301] MSR00000406: 000002a9000002a9
[ 0.576635] MSR00000408: 0000000000000001
[ 0.579968] MSR00000409: 0000000000000000
[ 0.583301] MSR0000040a: 000002a9000002a9
[ 0.586635] MSR0000040c: 0000000000000001
[ 0.589968] MSR0000040d: 0020000000000000
[ 0.593301] MSR0000040e: 00000080608ad188
[ 0.596635] MSR00000410: 0000000000000008
[ 0.599968] MSR00000411: 0000000000000011
[ 0.603302] MSR00000414: 0000000000000001
[ 0.606634] MSR00000415: 1000001004000e0f
[ 0.610018] MSRc0000080: 0000000000000d01
[ 0.613301] MSRc0000081: 0023001000000000
[ 0.616634] MSRc0000082: ffffffff8020bce0
[ 0.619968] MSRc0000083: ffffffff80228b70
[ 0.623301] MSRc0000084: 0000000000003700
[ 0.626681] MSRc0000100: 0000000000000000
[ 0.629968] MSRc0000101: ffffffff807e6c00
[ 0.633301] MSRc0000102: 0000000000000000
[ 0.643300] Booting processor 1/4 ip 6000
[ 0.003333] Initializing CPU#1
[ 0.003333] Calibrating delay using timer specific routine.. 6386.64 BogoMIPS (lpj=10639430)
[ 0.003333] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.003333] CPU: L2 cache: 6144K
[ 0.003333] CPU 1/4 -> Node 0
[ 0.003333] CPU: Physical Processor ID: 1
[ 0.003333] CPU: Processor Core ID: 0
[ 0.003333] CPU1: Thermal monitoring enabled (TM2)
[ 0.003333] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.738103] CPU1: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06
[ 0.744732] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.746689] Booting processor 2/1 ip 6000
[ 0.003333] Initializing CPU#2
[ 0.003333] Calibrating delay using timer specific routine.. 6386.61 BogoMIPS (lpj=10639385)
[ 0.003333] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.003333] CPU: L2 cache: 6144K
[ 0.003333] CPU 2/1 -> Node 0
[ 0.003333] CPU: Physical Processor ID: 0
[ 0.003333] CPU: Processor Core ID: 1
[ 0.003333] CPU2: Thermal monitoring enabled (TM2)
[ 0.003333] x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
[ 0.844800] CPU2: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06
[ 0.851400] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.853400] Booting processor 3/5 ip 6000
[ 0.003333] Initializing CPU#3
[ 0.003333] Calibrating delay using timer specific routine.. 6386.62 BogoMIPS (lpj=10639401)
[ 0.003333] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.003333] CPU: L2 cache: 6144K
[ 0.003333] CPU 3/5 -> Node 0
[ 0.003333] CPU: Physical Processor ID: 1
[ 0.003333] CPU: Processor Core ID: 1
[ 0.003333] CPU3: Thermal monitoring enabled (TM2)
[ 0.003333] x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106
[ 0.951441] CPU3: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06
[ 0.958064] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 0.960026] Booting processor 4/2 ip 6000
[ 0.003333] Initializing CPU#4
[ 0.003333] Calibrating delay using timer specific routine.. 6386.60 BogoMIPS (lpj=10639363)
[ 0.003333] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.003333] CPU: L2 cache: 6144K
[ 0.003333] CPU 4/2 -> Node 0
[ 0.003333] CPU: Physical Processor ID: 0
[ 0.003333] CPU: Processor Core ID: 2
[ 0.003333] CPU4: Thermal monitoring enabled (TM2)
[ 0.003333] x86 PAT enabled: cpu 4, old 0x7040600070406, new 0x7010600070106
[ 1.058128] CPU4: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06
[ 1.064733] checking TSC synchronization [CPU#0 -> CPU#4]: passed.
[ 1.066687] Booting processor 5/6 ip 6000
[ 0.003333] Initializing CPU#5
[ 0.003333] Calibrating delay using timer specific routine.. 6386.60 BogoMIPS (lpj=10639368)
[ 0.003333] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.003333] CPU: L2 cache: 6144K
[ 0.003333] CPU 5/6 -> Node 0
[ 0.003333] CPU: Physical Processor ID: 1
[ 0.003333] CPU: Processor Core ID: 2
[ 0.003333] CPU5: Thermal monitoring enabled (TM2)
[ 0.003333] x86 PAT enabled: cpu 5, old 0x7040600070406, new 0x7010600070106
[ 1.164844] CPU5: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06
[ 1.171401] checking TSC synchronization [CPU#0 -> CPU#5]: passed.
[ 1.173351] Booting processor 6/3 ip 6000
[ 0.003333] Initializing CPU#6
[ 0.003333] Calibrating delay using timer specific routine.. 6386.61 BogoMIPS (lpj=10639379)
[ 0.003333] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.003333] CPU: L2 cache: 6144K
[ 0.003333] CPU 6/3 -> Node 0
[ 0.003333] CPU: Physical Processor ID: 0
[ 0.003333] CPU: Processor Core ID: 3
[ 0.003333] CPU6: Thermal monitoring enabled (TM2)
[ 0.003333] x86 PAT enabled: cpu 6, old 0x7040600070406, new 0x7010600070106
[ 1.271472] CPU6: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06
[ 1.279979] checking TSC synchronization [CPU#0 -> CPU#6]: passed.
[ 1.286686] Booting processor 7/7 ip 6000
[ 0.003333] Initializing CPU#7
[ 0.003333] Calibrating delay using timer specific routine.. 6386.62 BogoMIPS (lpj=10639406)
[ 0.003333] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.003333] CPU: L2 cache: 6144K
[ 0.003333] CPU 7/7 -> Node 0
[ 0.003333] CPU: Physical Processor ID: 1
[ 0.003333] CPU: Processor Core ID: 3
[ 0.003333] CPU7: Thermal monitoring enabled (TM2)
[ 0.003333] x86 PAT enabled: cpu 7, old 0x7040600070406, new 0x7010600070106
[ 1.384776] CPU7: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06
[ 1.391399] checking TSC synchronization [CPU#0 -> CPU#7]: passed.
[ 1.393308] Brought up 8 CPUs
[ 1.396635] Total of 8 processors activated (51089.35 BogoMIPS).
[ 1.400602] net_namespace: 864 bytes
[ 1.403457] xor: automatically using best checksumming function: generic_sse
[ 1.423301] generic_sse: 11871.600 MB/sec
[ 1.426634] xor: using function: generic_sse (11871.600 MB/sec)
[ 1.429997] NET: Registered protocol family 16
[ 1.433531] No dock devices found.
[ 1.436849] ACPI: bus type pci registered
[ 1.440110] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 8
[ 1.443302] PCI: MCFG area at e0000000 reserved in E820
[ 1.446821] PCI: Using MMCONFIG at e0000000 - e08fffff
[ 1.449968] PCI: Using configuration type 1 for base access
[ 1.458449] ACPI: EC: Look up EC in DSDT
[ 1.460268] ACPI: Interpreter enabled
[ 1.463302] ACPI: (supports S0 S3 S4 S5)
[ 1.468074] ACPI: Using IOAPIC for interrupt routing
[ 1.475012] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 1.476744] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 1.479969] pci 0000:00:00.0: PME# disabled
[ 1.483323] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 1.486635] pci 0000:00:01.0: PME# disabled
[ 1.489991] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 1.493302] pci 0000:00:05.0: PME# disabled
[ 1.496658] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 1.499969] pci 0000:00:09.0: PME# disabled
[ 1.503525] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 1.506636] pci 0000:00:1b.0: PME# disabled
[ 1.510005] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.513303] pci 0000:00:1c.0: PME# disabled
[ 1.516837] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 1.519970] pci 0000:00:1d.7: PME# disabled
[ 1.523376] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 1.523526] pci 0000:01:00.0: supports D1
[ 1.523550] PCI: bridge 0000:00:01.0 32bit mmio: [dc100000, dc1fffff]
[ 1.526695] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 1.529969] pci 0000:03:00.0: PME# disabled
[ 1.533335] pci 0000:03:00.3: PME# supported from D0 D3hot D3cold
[ 1.536636] pci 0000:03:00.3: PME# disabled
[ 1.539993] PCI: bridge 0000:00:09.0 io port: [2000, 2fff]
[ 1.543302] PCI: bridge 0000:00:09.0 32bit mmio: [dc200000, dc3fffff]
[ 1.546674] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[ 1.549969] pci 0000:04:00.0: PME# disabled
[ 1.553333] pci 0000:04:02.0: PME# supported from D0 D3hot D3cold
[ 1.556636] pci 0000:04:02.0: PME# disabled
[ 1.559987] PCI: bridge 0000:03:00.0 io port: [2000, 2fff]
[ 1.563302] PCI: bridge 0000:03:00.0 32bit mmio: [dc200000, dc2fffff]
[ 1.566736] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
[ 1.569970] pci 0000:06:00.0: PME# disabled
[ 1.573370] pci 0000:06:00.1: PME# supported from D0 D3hot D3cold
[ 1.576636] pci 0000:06:00.1: PME# disabled
[ 1.579995] PCI: bridge 0000:04:02.0 io port: [2000, 2fff]
[ 1.583302] PCI: bridge 0000:04:02.0 32bit mmio: [dc200000, dc2fffff]
[ 1.586779] pci 0000:09:05.0: supports D1
[ 1.586780] pci 0000:09:05.0: supports D2
[ 1.586839] pci 0000:09:06.0: supports D2
[ 1.586840] pci 0000:09:06.0: PME# supported from D2 D3hot D3cold
[ 1.589970] pci 0000:09:06.0: PME# disabled
[ 1.593327] pci 0000:00:1e.0: transparent bridge
[ 1.596644] PCI: bridge 0000:00:1e.0 io port: [3000, 3fff]
[ 1.599969] PCI: bridge 0000:00:1e.0 32bit mmio: [dc000000, dc0fffff]
[ 1.603304] PCI: bridge 0000:00:1e.0 64bit mmio pref: [d8000000, dbffffff]
[ 1.606649] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.607085] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 1.607173] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[ 1.607254] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 1.609973] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9.BMD0._PRT]
[ 1.610147] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9.BMD0.BPD0._PRT]
[ 1.610229] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9.BMD0.BPD2._PRT]
[ 1.610311] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9.BMF3._PRT]
[ 1.610438] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 1.610530] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 1.619795] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 14 15)
[ 1.623888] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 14 15)
[ 1.631510] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 14 15)
[ 1.639519] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 14 15)
[ 1.643883] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 14 15)
[ 1.651512] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 *11 14 15)
[ 1.659053] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 14 15)
[ 1.663358] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 10 11 14 15) *9
[ 1.671379] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 1.673363] pnp: PnP ACPI init
[ 1.676638] ACPI: bus type pnp registered
[ 1.684675] pnp: PnP ACPI: found 11 devices
[ 1.686635] ACPI: ACPI bus type pnp unregistered
[ 1.690226] SCSI subsystem initialized
[ 1.693560] libata version 3.00 loaded.
[ 1.693878] usbcore: registered new interface driver usbfs
[ 1.696702] usbcore: registered new interface driver hub
[ 1.700059] usbcore: registered new device driver usb
[ 1.703709] PCI: Using ACPI for IRQ routing
[ 1.723323] PCI-GART: No AMD northbridge found.
[ 1.726732] hpet clockevent registered
[ 1.726735] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 1.733301] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 1.739991] ACPI: RTC can wake from S4
[ 1.752137] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 1.758702] system 00:01: ioport range 0x800-0x80f has been reserved
[ 1.765260] system 00:01: ioport range 0x1000-0x107f has been reserved
[ 1.771994] system 00:01: ioport range 0x1180-0x11bf has been reserved
[ 1.778731] system 00:01: ioport range 0xfe00-0xfe00 has been reserved
[ 1.785460] system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
[ 1.793294] system 00:01: iomem range 0xfee00000-0xfee0ffff could not be reserved
[ 1.801126] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 1.808961] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 1.816288] system 00:01: iomem range 0xfec88000-0xfec88fff has been reserved
[ 1.823621] system 00:01: iomem range 0xfe000000-0xfe01ffff has been reserved
[ 1.830953] system 00:01: iomem range 0xfe600000-0xfe6fffff has been reserved
[ 1.839316] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 1.845445] pci 0000:00:01.0: IO window: disabled
[ 1.850520] pci 0000:00:01.0: MEM window: 0xdc100000-0xdc1fffff
[ 1.856816] pci 0000:00:01.0: PREFETCH window: 0x000000d1000000-0x000000d10fffff
[ 1.864732] pci 0000:00:05.0: PCI bridge, secondary bus 0000:02
[ 1.870855] pci 0000:00:05.0: IO window: disabled
[ 1.875931] pci 0000:00:05.0: MEM window: disabled
[ 1.881096] pci 0000:00:05.0: PREFETCH window: disabled
[ 1.886696] pci 0000:04:00.0: PCI bridge, secondary bus 0000:05
[ 1.892815] pci 0000:04:00.0: IO window: disabled
[ 1.897892] pci 0000:04:00.0: MEM window: disabled
[ 1.903058] pci 0000:04:00.0: PREFETCH window: disabled
[ 1.908667] pci 0000:04:02.0: PCI bridge, secondary bus 0000:06
[ 1.914787] pci 0000:04:02.0: IO window: 0x2000-0x2fff
[ 1.920296] pci 0000:04:02.0: MEM window: 0xdc200000-0xdc2fffff
[ 1.926590] pci 0000:04:02.0: PREFETCH window: 0x000000d1100000-0x000000d11fffff
[ 1.934508] pci 0000:03:00.0: PCI bridge, secondary bus 0000:04
[ 1.941128] pci 0000:03:00.0: IO window: 0x2000-0x2fff
[ 1.946634] pci 0000:03:00.0: MEM window: 0xdc200000-0xdc2fffff
[ 1.952928] pci 0000:03:00.0: PREFETCH window: 0x000000d1100000-0x000000d11fffff
[ 1.960845] pci 0000:03:00.3: PCI bridge, secondary bus 0000:07
[ 1.966966] pci 0000:03:00.3: IO window: disabled
[ 1.972055] pci 0000:03:00.3: MEM window: disabled
[ 1.977218] pci 0000:03:00.3: PREFETCH window: disabled
[ 1.982814] pci 0000:00:09.0: PCI bridge, secondary bus 0000:03
[ 1.988938] pci 0000:00:09.0: IO window: 0x2000-0x2fff
[ 1.994447] pci 0000:00:09.0: MEM window: 0xdc200000-0xdc3fffff
[ 2.000745] pci 0000:00:09.0: PREFETCH window: 0x000000d1100000-0x000000d11fffff
[ 2.008670] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:08
[ 2.014789] pci 0000:00:1c.0: IO window: disabled
[ 2.019866] pci 0000:00:1c.0: MEM window: disabled
[ 2.025029] pci 0000:00:1c.0: PREFETCH window: disabled
[ 2.030622] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:09
[ 2.036743] pci 0000:00:1e.0: IO window: 0x3000-0x3fff
[ 2.042263] pci 0000:00:1e.0: MEM window: 0xdc000000-0xdc0fffff
[ 2.048555] pci 0000:00:1e.0: PREFETCH window: 0x000000d8000000-0x000000dbffffff
[ 2.056478] found new irq_cfg for irq 16
[ 2.056479] 0 add_pin_to_irq: irq 16 --> apic 0 pin 16
[ 2.056482] found new irq_desc for irq 16
[ 2.056484] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.063384] pci 0000:00:01.0: setting latency timer to 64
[ 2.063387] pci 0000:00:05.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.070283] pci 0000:00:05.0: setting latency timer to 64
[ 2.070286] pci 0000:00:09.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.077180] pci 0000:00:09.0: setting latency timer to 64
[ 2.077185] vendor=8086 device=4029
[ 2.080865] pci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.087764] pci 0000:03:00.0: setting latency timer to 64
[ 2.087768] vendor=8086 device=3500
[ 2.091456] vendor=8086 device=4029
[ 2.095138] pci 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.102047] pci 0000:04:00.0: setting latency timer to 64
[ 2.102051] vendor=8086 device=3500
[ 2.105749] vendor=8086 device=4029
[ 2.109430] found new irq_cfg for irq 18
[ 2.109431] 0 add_pin_to_irq: irq 18 --> apic 0 pin 18
[ 2.109434] found new irq_desc for irq 18
[ 2.109436] pci 0000:04:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.116340] pci 0000:04:02.0: setting latency timer to 64
[ 2.116345] pci 0000:03:00.3: setting latency timer to 64
[ 2.116349] found new irq_cfg for irq 21
[ 2.116350] 0 add_pin_to_irq: irq 21 --> apic 0 pin 21
[ 2.116352] found new irq_desc for irq 21
[ 2.116353] pci 0000:00:1c.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 2.123255] pci 0000:00:1c.0: setting latency timer to 64
[ 2.123259] pci 0000:00:1e.0: setting latency timer to 64
[ 2.123261] bus: 00 index 0 io port: [0, ffff]
[ 2.127903] bus: 00 index 1 mmio: [0, ffffffffffffffff]
[ 2.133331] bus: 01 index 0 mmio: [0, 0]
[ 2.137454] bus: 01 index 1 mmio: [dc100000, dc1fffff]
[ 2.142784] bus: 01 index 2 mmio: [d1000000, d10fffff]
[ 2.148123] bus: 01 index 3 mmio: [0, 0]
[ 2.152256] bus: 02 index 0 mmio: [0, 0]
[ 2.156372] bus: 02 index 1 mmio: [0, 0]
[ 2.160487] bus: 02 index 2 mmio: [0, 0]
[ 2.164604] bus: 02 index 3 mmio: [0, 0]
[ 2.168727] bus: 03 index 0 io port: [2000, 2fff]
[ 2.173628] bus: 03 index 1 mmio: [dc200000, dc3fffff]
[ 2.178968] bus: 03 index 2 mmio: [d1100000, d11fffff]
[ 2.184307] bus: 03 index 3 mmio: [0, 0]
[ 2.188429] bus: 04 index 0 io port: [2000, 2fff]
[ 2.193329] bus: 04 index 1 mmio: [dc200000, dc2fffff]
[ 2.199107] bus: 04 index 2 mmio: [d1100000, d11fffff]
[ 2.204438] bus: 04 index 3 mmio: [0, 0]
[ 2.208552] bus: 05 index 0 mmio: [0, 0]
[ 2.216825] bus: 05 index 1 mmio: [0, 0]
[ 2.220945] bus: 05 index 2 mmio: [0, 0]
[ 2.225060] bus: 05 index 3 mmio: [0, 0]
[ 2.229180] bus: 06 index 0 io port: [2000, 2fff]
[ 2.234078] bus: 06 index 1 mmio: [dc200000, dc2fffff]
[ 2.239404] bus: 06 index 2 mmio: [d1100000, d11fffff]
[ 2.244739] bus: 06 index 3 mmio: [0, 0]
[ 2.248859] bus: 07 index 0 mmio: [0, 0]
[ 2.252977] bus: 07 index 1 mmio: [0, 0]
[ 2.257092] bus: 07 index 2 mmio: [0, 0]
[ 2.261210] bus: 07 index 3 mmio: [0, 0]
[ 2.265335] bus: 08 index 0 mmio: [0, 0]
[ 2.269451] bus: 08 index 1 mmio: [0, 0]
[ 2.273570] bus: 08 index 2 mmio: [0, 0]
[ 2.277688] bus: 08 index 3 mmio: [0, 0]
[ 2.281803] bus: 09 index 0 io port: [3000, 3fff]
[ 2.286702] bus: 09 index 1 mmio: [dc000000, dc0fffff]
[ 2.292040] bus: 09 index 2 mmio: [d8000000, dbffffff]
[ 2.297368] bus: 09 index 3 io port: [0, ffff]
[ 2.302015] bus: 09 index 4 mmio: [0, ffffffffffffffff]
[ 2.307441] NET: Registered protocol family 2
[ 2.342447] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 2.351747] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 2.362318] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 2.369559] TCP: Hash tables configured (established 524288 bind 65536)
[ 2.376372] TCP reno registered
[ 2.388889] NET: Registered protocol family 1
[ 2.393533] checking if image is initramfs... it is
[ 2.447462] Freeing initrd memory: 1917k freed
[ 2.452418] pci 0000:09:05.0: Boot video device
[ 2.452642] input: Power Button (FF) as /class/input/input0
[ 2.458415] ACPI: Power Button (FF) [PWRF]
[ 2.462809] input: Power Button (CM) as /class/input/input1
[ 2.468578] ACPI: Power Button (CM) [PWRB]
[ 2.473058] found new irq_cfg for irq 20
[ 2.473059] 0 add_pin_to_irq: irq 20 --> apic 0 pin 20
[ 2.473065] found new irq_desc for irq 20
[ 2.473069] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 2.474634] Switched to high resolution mode on CPU 2
[ 2.474651] Switched to high resolution mode on CPU 7
[ 2.474734] Switched to high resolution mode on CPU 5
[ 2.474746] Switched to high resolution mode on CPU 3
[ 2.475210] Switched to high resolution mode on CPU 1
[ 2.475274] Switched to high resolution mode on CPU 4
[ 2.475559] Switched to high resolution mode on CPU 6
[ 2.480410] Switched to high resolution mode on CPU 0
[ 2.480417] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 2.480420] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.485941] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 2.497588] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.502323] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 2.502334] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xdc608000
[ 2.520008] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 2.527959] usb usb1: configuration #1 chosen from 1 choice
[ 2.533803] hub 1-0:1.0: USB hub found
[ 2.537753] hub 1-0:1.0: 8 ports detected
[ 2.643637] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.643697] USB Universal Host Controller Interface driver v3.0
[ 2.649833] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 2.657167] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.657169] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.662661] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.670423] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001800
[ 2.676470] usb usb2: configuration #1 chosen from 1 choice
[ 2.682306] hub 2-0:1.0: USB hub found
[ 2.686256] hub 2-0:1.0: 2 ports detected
[ 2.793526] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 2.800868] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.800870] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.806365] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 2.814138] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00001820
[ 2.820190] usb usb3: configuration #1 chosen from 1 choice
[ 2.826029] hub 3-0:1.0: USB hub found
[ 2.829983] hub 3-0:1.0: 2 ports detected
[ 2.936857] found new irq_cfg for irq 22
[ 2.936858] 0 add_pin_to_irq: irq 22 --> apic 0 pin 22
[ 2.936860] found new irq_desc for irq 22
[ 2.936862] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 2.944205] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.944207] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.949699] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 2.957472] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00001840
[ 2.963516] usb usb4: configuration #1 chosen from 1 choice
[ 2.969356] hub 4-0:1.0: USB hub found
[ 2.973310] hub 4-0:1.0: 2 ports detected
[ 3.080191] found new irq_cfg for irq 23
[ 3.080192] 0 add_pin_to_irq: irq 23 --> apic 0 pin 23
[ 3.080195] found new irq_desc for irq 23
[ 3.080197] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 3.087542] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 3.087544] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 3.093035] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 3.100820] uhci_hcd 0000:00:1d.3: irq 23, io base 0x00001860
[ 3.106869] usb usb5: configuration #1 chosen from 1 choice
[ 3.112703] hub 5-0:1.0: USB hub found
[ 3.116656] hub 5-0:1.0: 2 ports detected
[ 3.223686] Simple Boot Flag at 0x40 set to 0x80
[ 3.232748] audit: initializing netlink socket (disabled)
[ 3.238371] type=2000 audit(1219700065.236:1): initialized
[ 3.249049] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 3.258941] VFS: Disk quotas dquot_6.5.1
[ 3.263163] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 3.271065] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 3.277919] msgmni has been set to 32106
[ 3.282179] async_tx: api initialized (async)
[ 3.286738] io scheduler noop registered
[ 3.290862] io scheduler anticipatory registered
[ 3.295673] io scheduler deadline registered
[ 3.300297] io scheduler cfq registered (default)
[ 3.305352] pcieport-driver 0000:00:01.0: setting latency timer to 64
[ 3.305374] pcieport-driver 0000:00:01.0: found MSI capability
[ 3.311410] found new irq_cfg for irq 33024
[ 3.311415] found new irq_desc for irq 33024
[ 3.311423] pci_express 0000:00:01.0:pcie00: allocate port service
[ 3.311505] pci_express 0000:00:01.0:pcie01: allocate port service
[ 3.311585] pcieport-driver 0000:00:05.0: setting latency timer to 64
[ 3.311606] pcieport-driver 0000:00:05.0: found MSI capability
[ 3.317646] found new irq_cfg for irq 164096
[ 3.317648] found new irq_desc for irq 164096
[ 3.317655] pci_express 0000:00:05.0:pcie00: allocate port service
[ 3.317727] pci_express 0000:00:05.0:pcie01: allocate port service
[ 3.317806] pcieport-driver 0000:00:09.0: setting latency timer to 64
[ 3.317828] pcieport-driver 0000:00:09.0: found MSI capability
[ 3.323867] found new irq_cfg for irq 295168
[ 3.323868] found new irq_desc for irq 295168
[ 3.323875] pci_express 0000:00:09.0:pcie00: allocate port service
[ 3.323945] pci_express 0000:00:09.0:pcie01: allocate port service
[ 3.324032] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 3.324057] pcieport-driver 0000:00:1c.0: found MSI capability
[ 3.330104] found new irq_cfg for irq 917760
[ 3.330105] found new irq_desc for irq 917760
[ 3.330115] pci_express 0000:00:1c.0:pcie00: allocate port service
[ 3.330188] pci_express 0000:00:1c.0:pcie02: allocate port service
[ 3.330236] pci_express 0000:00:1c.0:pcie03: allocate port service
[ 3.330335] pcieport-driver 0000:03:00.0: setting latency timer to 64
[ 3.330361] pci_express 0000:03:00.0:pcie11: allocate port service
[ 3.330458] pcieport-driver 0000:04:00.0: setting latency timer to 64
[ 3.330480] pcieport-driver 0000:04:00.0: found MSI capability
[ 3.336530] found new irq_cfg for irq 4194560
[ 3.336532] found new irq_desc for irq 4194560
[ 3.336543] pci_express 0000:04:00.0:pcie21: allocate port service
[ 3.336651] pcieport-driver 0000:04:02.0: setting latency timer to 64
[ 3.336675] pcieport-driver 0000:04:02.0: found MSI capability
[ 3.342722] found new irq_cfg for irq 4260096
[ 3.342724] found new irq_desc for irq 4260096
[ 3.342735] pci_express 0000:04:02.0:pcie21: allocate port service
[ 3.343580] aer 0000:00:01.0:pcie01: AER service couldn't init device: no _OSC support
[ 3.344172] aer 0000:00:05.0:pcie01: AER service couldn't init device: no _OSC support
[ 3.344758] aer 0000:00:09.0:pcie01: AER service couldn't init device: no _OSC support
[ 3.345543] ACPI: SSDT CFF04DBE, 01DD (r1 PmRef Cpu0Ist 3000 INTL 20050228)
[ 3.353334] processor ACPI0007:00: registered as cooling_device0
[ 3.360253] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 3.367102] ACPI: SSDT CFF04F9B, 016E (r1 PmRef Cpu1Ist 3000 INTL 20050228)
[ 3.266881] processor ACPI0007:01: registered as cooling_device1
[ 3.381854] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 3.388729] ACPI: SSDT CFF05109, 016E (r1 PmRef Cpu2Ist 3000 INTL 20050228)
[ 3.397234] processor ACPI0007:02: registered as cooling_device2
[ 3.403440] ACPI: Processor [CPU2] (supports 8 throttling states)
[ 3.410261] ACPI: SSDT CFF05277, 016E (r1 PmRef Cpu3Ist 3000 INTL 20050228)
[ 3.418748] processor ACPI0007:03: registered as cooling_device3
[ 3.424960] ACPI: Processor [CPU3] (supports 8 throttling states)
[ 3.431805] ACPI: SSDT CFF053E5, 016E (r1 PmRef CPU4Ist 3000 INTL 20050228)
[ 3.270834] processor ACPI0007:04: registered as cooling_device4
[ 3.446507] ACPI: Processor [CPU4] (supports 8 throttling states)
[ 3.453414] ACPI: SSDT CFF05553, 016E (r1 PmRef CPU5Ist 3000 INTL 20050228)
[ 3.271042] processor ACPI0007:05: registered as cooling_device5
[ 3.468167] ACPI: Processor [CPU5] (supports 8 throttling states)
[ 3.475014] ACPI: SSDT CFF056C1, 016E (r1 PmRef Cpu6Ist 3000 INTL 20050228)
[ 3.467918] processor ACPI0007:06: registered as cooling_device6
[ 3.489708] ACPI: Processor [CPU6] (supports 8 throttling states)
[ 3.496547] ACPI: SSDT CFF0582F, 016E (r1 PmRef Cpu7Ist 3000 INTL 20050228)
[ 3.505058] processor ACPI0007:07: registered as cooling_device7
[ 3.511266] ACPI: Processor [CPU7] (supports 8 throttling states)
[ 3.577486] Non-volatile memory driver v1.2
[ 3.582244] intel_rng: FWH not detected
[ 3.586374] Linux agpgart interface v0.103
[ 3.590746] Serial: 8250/16550 driver4 ports, IRQ sharing disabled
[ 3.597254] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 3.603650] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 3.610425] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 3.616418] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 3.637353] FDC 0 is a post-1991 82077
[ 3.643999] brd: module loaded
[ 3.648125] loop: module loaded
[ 3.651483] tun: Universal TUN/TAP device driver, 1.6
[ 3.656733] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 3.663226] console [netcon0] enabled
[ 3.667087] netconsole: network logging started
[ 3.671813] Uniform Multi-Platform E-IDE driver
[ 3.676626] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
[ 3.686719] Probing IDE interface ide0...
[ 4.386871] hda: Optiarc DVD RW AD-7590A, ATAPI CD/DVD-ROM drive
[ 5.030061] Probing IDE interface ide1...
[ 5.563407] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 5.568224] ide1 at 0x170-0x177,0x376 on irq 15
[ 5.066667] hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 974kB Cache
[ 5.584052] Uniform CD-ROM driver Revision: 3.20
[ 7.726667] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[ 8.179669] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[ 8.186885] megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008
[ 8.193019] Driver 'sd' needs updating - please use bus_type methods
[ 8.199622] Driver 'sr' needs updating - please use bus_type methods
[ 8.206389] ata_piix 0000:00:1f.1: version 2.12
[ 8.206400] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 8.213746] ata_piix 0000:00:1f.1: BAR 0: can't reserve I/O region [0x1f0-0x1f7]
[ 8.221489] ata_piix 0000:00:1f.1: failed to request/iomap BARs for port 0 (errno=-16)
[ 8.229757] ata_piix 0000:00:1f.1: BAR 2: can't reserve I/O region [0x170-0x177]
[ 8.237502] ata_piix 0000:00:1f.1: failed to request/iomap BARs for port 1 (errno=-16)
[ 8.245763] ata_piix 0000:00:1f.1: no available native port
[ 8.252009] Fusion MPT base driver 3.04.07
[ 8.256298] Copyright (c) 1999-2008 LSI Corporation
[ 8.261376] Fusion MPT SPI Host driver 3.04.07
[ 8.266077] Fusion MPT SAS Host driver 3.04.07
[ 8.271077] vendor=8086 device=244e
[ 8.274770] found new irq_cfg for irq 17
[ 8.274771] 0 add_pin_to_irq: irq 17 --> apic 0 pin 17
[ 8.274775] found new irq_desc for irq 17
[ 8.274778] ohci1394 0000:09:06.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 8.335284] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[dc040000-dc0407ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 8.352396] ieee1394: raw1394: /dev/raw1394 device initialized
[ 8.358974] usbcore: registered new interface driver usblp
[ 8.364664] Initializing USB Mass Storage driver...
[ 8.373899] usbcore: registered new interface driver usb-storage
[ 8.380108] USB Mass Storage support registered.
[ 8.385027] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 8.394944] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 8.400119] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 8.405573] mice: PS/2 mouse device common for all mice
[ 8.613333] md: linear personality registered for level -1
[ 8.772496] md: raid0 personality registered for level 0
[ 8.778017] md: raid1 personality registered for level 1
[ 8.783526] md: raid10 personality registered for level 10
[ 8.843752] raid6: int64x1 2858 MB/s
[ 8.903766] raid6: int64x2 3533 MB/s
[ 8.963751] raid6: int64x4 3433 MB/s
[ 9.023764] raid6: int64x8 2296 MB/s
[ 9.083752] raid6: sse2x1 3645 MB/s
[ 9.143749] raid6: sse2x2 7359 MB/s
[ 9.203750] raid6: sse2x4 8798 MB/s
[ 9.207697] raid6: using algorithm sse2x4 (8798 MB/s)
[ 9.212940] md: raid6 personality registered for level 6
[ 9.218446] md: raid5 personality registered for level 5
[ 9.223959] md: raid4 personality registered for level 4
[ 9.229468] md: multipath personality registered for level -4
[ 9.235625] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 9.244414] cpuidle: using governor ladder
[ 9.248708] cpuidle: using governor menu
[ 9.252892] usbcore: registered new interface driver usbhid
[ 9.258660] usbhid: v2.6:USB HID core driver
[ 9.263234] oprofile: using NMI interrupt.
[ 9.267730] TCP cubic registered
[ 9.271247] NET: Registered protocol family 10
[ 9.276347] IPv6 over IPv4 tunneling driver
[ 9.281180] NET: Registered protocol family 17
[ 9.286175] RPC: Registered udp transport module.
[ 9.291082] RPC: Registered tcp transport module.
[ 9.298064] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 9.304600] Freeing unused kernel memory: 676k freed
[ 9.309964] Write protecting the kernel read-only data: 5576k
[ 9.541223] vendor=8086 device=4021
[ 9.541227] arcmsr 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 9.541232] arcmsr 0000:01:00.0: setting latency timer to 64
[ 9.553980] ARECA RAID ADAPTER0: FIRMWARE VERSION V1.45 2008-3-14
[ 9.566674] scsi0 : Areca SATA Host Adapter RAID Controller( RAID6 capable)
[ 9.566675] Driver Version 1.20.00.15 2008/02/27
[ 9.557083] scsi 0:0:0:0: Direct-Access Areca ARC-1280-VOL#00 R001 PQ: 0 ANSI: 5
[ 9.556875] sd 0:0:0:0: [sda] Very big device. Trying to use READ CAPACITY(16).
[ 9.557708] sd 0:0:0:0: [sda] 42968747008 512-byte hardware sectors (21999998 MB)
[ 9.557708] sd 0:0:0:0: [sda] Write Protect is off
[ 9.557708] sd 0:0:0:0: [sda] Mode Sense: cb 00 00 08
[ 9.556666] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 9.557083] sd 0:0:0:0: [sda] Very big device. Trying to use READ CAPACITY(16).
[ 9.554583] sd 0:0:0:0: [sda] 42968747008 512-byte hardware sectors (21999998 MB)
[ 9.556875] sd 0:0:0:0: [sda] Write Protect is off
[ 9.556875] sd 0:0:0:0: [sda] Mode Sense: cb 00 00 08
[ 9.557708] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 9.557708] sda:<7>ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e08100002824f8]
[ 9.577500] sda1 sda2 sda3 sda4
[ 9.954660] sd 0:0:0:0: [sda] Attached SCSI disk
[ 9.954889] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 9.955753] scsi 0:0:16:0: Processor Areca RAID controller R001 PQ: 0 ANSI: 0
[ 9.956200] scsi 0:0:16:0: Attached scsi generic sg1 type 3
[ 10.023565] 3ware Storage Controller device driver for Linux v1.26.02.002.
[ 10.033876] 3ware 9000 Storage Controller device driver for Linux v2.26.02.011.
[ 10.049059] Adaptec aacraid driver 1.1-5[2456]-ms
[ 10.154668] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
[ 10.156139] SGI XFS Quota Management subsystem
[ 10.169930] Intel(R) PRO/1000 Network Driver - version 7.3.20-k3-NAPI
[ 10.169932] Copyright (c) 1999-2006 Intel Corporation.
[ 14.230000] kjournald starting. Commit interval 5 seconds
[ 14.236667] EXT3-fs: mounted filesystem with ordered data mode.
[ 22.764869] found new irq_cfg for irq 19
[ 22.764871] 0 add_pin_to_irq: irq 19 --> apic 0 pin 19
[ 22.764876] found new irq_desc for irq 19
[ 22.764879] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 22.775780] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
[ 22.775863] iTCO_wdt: Found a 631xESB/632xESB TCO device (Version=2, TCOBASE=0x1060)
[ 22.775952] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 22.782406] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k2
[ 22.782408] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 22.782479] vendor=8086 device=3518
[ 22.782480] vendor=8086 device=3500
[ 22.782482] vendor=8086 device=4029
[ 22.782484] e1000e 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 22.782492] e1000e 0000:06:00.0: setting latency timer to 64
[ 22.855404] 0000:06:00.0: eth0: (PCI Express:2.5GB/s:Width x4) 00:e0:81:b0:84:14
[ 22.855406] 0000:06:00.0: eth0: Intel(R) PRO/1000 Network Connection
[ 22.855484] 0000:06:00.0: eth0: MAC: 3, PHY: 5, PBA No: ffffff-0ff
[ 22.855506] vendor=8086 device=3518
[ 22.855507] vendor=8086 device=3500
[ 22.855508] vendor=8086 device=4029
[ 22.855510] e1000e 0000:06:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 22.855515] e1000e 0000:06:00.1: setting latency timer to 64
[ 22.932857] 0000:06:00.1: eth1: (PCI Express:2.5GB/s:Width x4) 00:e0:81:b0:84:15
[ 22.932859] 0000:06:00.1: eth1: Intel(R) PRO/1000 Network Connection
[ 22.932937] 0000:06:00.1: eth1: MAC: 3, PHY: 5, PBA No: ffffff-0ff
[ 23.605493] EXT3 FS on sda3, internal journal
[ 24.137915] XFS mounting filesystem sda4
[ 24.234165] Ending clean XFS mount for filesystem: sda4
[ 24.370791] Adding 31999992k swap on /dev/sda2. Priority:-1 extents:1 across:31999992k
[ 28.090792] found new irq_cfg for irq 6291712
[ 28.090798] found new irq_desc for irq 6291712
[ 28.145496] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 30.766056] 0000:06:00.0: eth0: Link is Up 1000 Mbps Full Duplex, Flow Control: None
[ 30.768604] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 40.941246] eth0: no IPv6 routers present
[ 61.380619] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 61.406663] NFSD: starting 90-second grace period
next prev parent reply other threads:[~2008-08-25 21:43 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <bug-11388-27@http.bugzilla.kernel.org/>
2008-08-21 1:04 ` [Bug 11388] New: 2.6.27-rc3 warns about MTRR range; only 3 of 16gb of memory is usable Andrew Morton
2008-08-21 1:20 ` Yinghai Lu
2008-08-21 1:49 ` Yinghai Lu
2008-08-21 11:44 ` Ingo Molnar
2008-08-21 11:56 ` Ingo Molnar
2008-08-21 15:39 ` Yinghai Lu
2008-08-22 3:51 ` Ingo Molnar
2008-08-22 4:45 ` Yinghai Lu
2008-08-21 20:55 ` Joshua Hoblitt
2008-08-21 21:51 ` Yinghai Lu
2008-08-21 23:33 ` Joshua Hoblitt
2008-08-22 0:10 ` Joshua Hoblitt
2008-08-22 0:28 ` Yinghai Lu
2008-08-22 0:29 ` Joshua Hoblitt
2008-08-22 1:00 ` Joshua Hoblitt
2008-08-22 1:10 ` Joshua Hoblitt
2008-08-22 1:55 ` Yinghai Lu
2008-08-22 2:15 ` Joshua Hoblitt
2008-08-22 2:26 ` Yinghai Lu
2008-08-22 3:24 ` Yinghai Lu
2008-08-22 3:50 ` Ingo Molnar
2008-08-22 3:56 ` Ingo Molnar
2008-08-22 4:48 ` Yinghai Lu
2008-08-23 0:22 ` Joshua Hoblitt
2008-08-23 5:52 ` Yinghai Lu
2008-08-23 10:43 ` Ingo Molnar
2008-08-26 8:35 ` Joshua Hoblitt
2008-08-26 8:42 ` Ingo Molnar
2008-08-25 21:43 ` Joshua Hoblitt [this message]
2008-08-22 6:16 ` Yinghai Lu
2008-08-22 6:24 ` Ingo Molnar
2008-08-23 23:53 ` Arjan van de Ven
2008-08-25 9:17 ` Ingo Molnar
2008-08-22 3:26 ` Joshua Hoblitt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080825214319.GC12156@hoblitt.com \
--to=josh@hoblitt.com \
--cc=akpm@linux-foundation.org \
--cc=bugme-daemon@bugzilla.kernel.org \
--cc=j_kernel@hoblitt.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=yhlu.kernel@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.