Re: [Qemu-devel] 8139cp problems - steps to reproduce

[Nikola Ciprich <extmaillist@linuxbox.cz>]

On Mon, Sep 08, 2008 at 11:54:01PM +0400, Igor Kovalenko wrote:
Hi Igor,

I'm using bridged TAP device. Running ethtool -S eth0 (when it's still working)
shows increasing number of rx_err (rx_fifo is also increasing, dunno what that means).
tx_ok, rx_ok are also increasing of course. Then when the network hangs, tx_ok, rx_ok stop
increasing, and only rx_err and rx_fifo keep growing...

rtl8139-diag says among others:

Transmitter enabled with NONSTANDARD! settings, maximum burst 1024 bytes.
dunno if this is related...

when trying 2.6.26 x86-32 guest, i also got this:
[ 3719.662726] eth0: Transmit timeout, status  d   2b   15 80ff
[ 3719.662968] ------------[ cut here ]------------
[ 3719.662970] WARNING: at net/sched/sch_generic.c:223 dev_watchdog+0xde/0xf0()
[ 3719.662972] Modules linked in: nfs lockd sunrpc ipv6 dm_mod sbshc container button battery ac i2c_piix4 i2c_core 8139cp mii bitrev crc32 piix pata_acpi ide_pci_generic ata_piix ata_generic libata sd_mod scsi_mod dock ide_disk ide_core ext3 jbd uhci_hcd ohci_hcd ehci_hcd [last unloaded: x_tables]
[ 3719.663087] Pid: 0, comm: swapper Not tainted 2.6.26lb.01 #1
[ 3719.663091]  [<c012477f>] warn_on_slowpath+0x5f/0x90
[ 3719.663112]  [<e08fab2c>] cp_interrupt+0x25c/0x440 [8139cp]
[ 3719.663123]  [<c013ca3d>] getnstimeofday+0x3d/0xe0
[ 3719.663136]  [<c0113769>] ack_ioapic_quirk_irq+0x9/0x80
[ 3719.663143]  [<c015604c>] handle_fasteoi_irq+0x8c/0xe0
[ 3719.663151]  [<c0105e30>] do_IRQ+0x40/0x70
[ 3719.663155]  [<c0108aaa>] nommu_map_single+0x2a/0x60
[ 3719.663158]  [<c02b2840>] dev_watchdog+0x0/0xf0
[ 3719.663161]  [<c0103a1f>] common_interrupt+0x23/0x28
[ 3719.663164]  [<c02b2840>] dev_watchdog+0x0/0xf0
[ 3719.663168]  [<c02b291e>] dev_watchdog+0xde/0xf0
[ 3719.663171]  [<c012d2a6>] run_timer_softirq+0x116/0x180
[ 3719.663179]  [<c01296b2>] __do_softirq+0x72/0xf0
[ 3719.663183]  [<c0129767>] do_softirq+0x37/0x40
[ 3719.663186]  [<c0129ab7>] irq_exit+0x57/0x70
[ 3719.663189]  [<c0111e38>] smp_apic_timer_interrupt+0x58/0x90
[ 3719.663193]  [<c0156bc7>] rcu_pending+0x37/0x50
[ 3719.663195]  [<c0101bd0>] default_idle+0x0/0x40
[ 3719.663210]  [<c0103adc>] apic_timer_interrupt+0x28/0x30
[ 3719.663212]  [<c0101bd0>] default_idle+0x0/0x40
[ 3719.663216]  [<c0101bfe>] default_idle+0x2e/0x40
[ 3719.663219]  [<c0101af3>] cpu_idle+0x53/0xc0
[ 3719.663224]  =======================
[ 3719.663225] ---[ end trace a8aacd1e409fdad8 ]---

maybe it could help?

> On Mon, Sep 8, 2008 at 11:57 AM, Nikola Ciprich <extmaillist@linuxbox.cz> wrote:
> 
> If it is not guest networking... please check if rx missed is not zero
> (no idea how, probably with ethtool or with netstat -i)
> You can also try enabling overflow debugging statements near lines where
> 
> s->IntrStatus |= RxOverflow
> 
> ... there are 3 of these. There is quite low probability that rtl8139
> should not set RxOK if it has overflow, or that guest driver does not
> expect it in that combination (which seems to be rather valid in case
> card received full set of descriptors space of data and missed last
> packet before driver was able to read and vacate some buffers.)
> 
> -- 
> Kind regards,
> Igor V. Kovalenko
> --
> To unsubscribe from this list: send the line "unsubscribe kvm" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

-- 
-------------------------------------
Nikola CIPRICH
LinuxBox.cz, s.r.o.
28. rijna 168, 709 01 Ostrava

tel.:   +420 596 603 142
fax:    +420 596 621 273
mobil:  +420 777 093 799
www.linuxbox.cz

mobil servis: +420 737 238 656
email servis: servis@linuxbox.cz
-------------------------------------