From: Paul Walmsley <paul@pwsan.com>
To: linux-omap@vger.kernel.org
Cc: Paul Walmsley <paul@pwsan.com>
Subject: [PATCH v2 01/12] OMAP2/3 clockdomains: add CM and PRM clkdms
Date: Wed, 10 Sep 2008 10:47:36 -0600 [thread overview]
Message-ID: <20080910164730.17024.2889.stgit@localhost.localdomain> (raw)
In-Reply-To: <20080910164631.17024.43733.stgit@localhost.localdomain>
Add clockdomains for the CM and PRM. These will ultimately replace the
"wkup_clkdm", which appears to not actually exist on the hardware.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
arch/arm/mach-omap2/clockdomains.h | 19 +++++++++++++++++++
arch/arm/plat-omap/include/mach/powerdomain.h | 4 ++--
2 files changed, 21 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-omap2/clockdomains.h b/arch/arm/mach-omap2/clockdomains.h
index e17c369..ec5a720 100644
--- a/arch/arm/mach-omap2/clockdomains.h
+++ b/arch/arm/mach-omap2/clockdomains.h
@@ -14,6 +14,11 @@
/*
* OMAP2/3-common clockdomains
+ *
+ * Even though the 2420 has a single PRCM module from the
+ * interconnect's perspective, internally it does appear to have
+ * separate PRM and CM clockdomains. The usual test case is
+ * sys_clkout/sys_clkout2.
*/
/* This is an implicit clockdomain - it is never defined as such in TRM */
@@ -23,6 +28,18 @@ static struct clockdomain wkup_clkdm = {
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX | CHIP_IS_OMAP3430),
};
+static struct clockdomain prm_clkdm = {
+ .name = "prm_clkdm",
+ .pwrdm = { .name = "wkup_pwrdm" },
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX | CHIP_IS_OMAP3430),
+};
+
+static struct clockdomain cm_clkdm = {
+ .name = "cm_clkdm",
+ .pwrdm = { .name = "core_pwrdm" },
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX | CHIP_IS_OMAP3430),
+};
+
/*
* 2420-only clockdomains
*/
@@ -266,6 +283,8 @@ static struct clkdm_pwrdm_autodep clkdm_pwrdm_autodeps[] = {
static struct clockdomain *clockdomains_omap[] = {
&wkup_clkdm,
+ &cm_clkdm,
+ &prm_clkdm,
#ifdef CONFIG_ARCH_OMAP2420
&mpu_2420_clkdm,
diff --git a/arch/arm/plat-omap/include/mach/powerdomain.h b/arch/arm/plat-omap/include/mach/powerdomain.h
index 4948cb7..69c9e67 100644
--- a/arch/arm/plat-omap/include/mach/powerdomain.h
+++ b/arch/arm/plat-omap/include/mach/powerdomain.h
@@ -50,9 +50,9 @@
/*
* Maximum number of clockdomains that can be associated with a powerdomain.
- * CORE powerdomain is probably the worst case.
+ * CORE powerdomain on OMAP3 is the worst case
*/
-#define PWRDM_MAX_CLKDMS 3
+#define PWRDM_MAX_CLKDMS 4
/* XXX A completely arbitrary number. What is reasonable here? */
#define PWRDM_TRANSITION_BAILOUT 100000
next prev parent reply other threads:[~2008-09-10 16:48 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-09-10 16:47 [PATCH v2 00/12] Update OMAP2/3 powerdomains, clockdomains Paul Walmsley
2008-09-10 16:47 ` Paul Walmsley [this message]
2008-09-10 16:47 ` [PATCH v2 02/12] OMAP2/3 clock: convert wkup_clkdm PRM clocks to prm_clkdm Paul Walmsley
2008-09-10 16:47 ` [PATCH v2 03/12] OMAP2/3 clock: annotate PRM clocks that are missing clockdomains Paul Walmsley
2008-09-10 16:47 ` [PATCH v2 04/12] OMAP2/3 clock: convert wkup_clkdm CM clocks to cm_clkdm Paul Walmsley
2008-09-10 16:47 ` [PATCH v2 05/12] OMAP2/3 clock: mark the rest of the CM clocks as belonging " Paul Walmsley
2008-09-10 16:47 ` [PATCH v2 06/12] OMAP2/3 clockdomain: remove wkup_clkdm Paul Walmsley
2008-09-10 16:47 ` [PATCH v2 07/12] OMAP3 PRCM: add DPLL1-5 powerdomains, clockdomains Paul Walmsley
2008-09-10 16:47 ` [PATCH v2 08/12] OMAP3 clock: mark DPLL clocks with their DPLLx clockdomains Paul Walmsley
2008-09-10 16:48 ` [PATCH v2 09/12] OMAP2/3 clock: note clockdomains for remaining clocks Paul Walmsley
2008-09-10 16:48 ` [PATCH v2 10/12] OMAP2 clockdomain: add virt_opp_clkdm Paul Walmsley
2008-09-10 16:48 ` [PATCH v2 11/12] OMAP3 clock: remove duplicate call to omap2_init_clk_clkdm() Paul Walmsley
2008-09-10 16:48 ` [PATCH v2 12/12] OMAP2/3 clock: warn if clock is missing clockdomain Paul Walmsley
2008-09-12 22:33 ` [PATCH v2 00/12] Update OMAP2/3 powerdomains, clockdomains Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080910164730.17024.2889.stgit@localhost.localdomain \
--to=paul@pwsan.com \
--cc=linux-omap@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.